* [PATCH 02/12] serial: ns16550: omap: set register shift from code
2014-04-28 7:45 [PATCH] Add Linux dts files and use them Sascha Hauer
@ 2014-04-28 7:45 ` Sascha Hauer
2014-04-28 7:45 ` [PATCH 03/12] dts: Use dt-bindings from kernel Sascha Hauer
` (10 subsequent siblings)
11 siblings, 0 replies; 23+ messages in thread
From: Sascha Hauer @ 2014-04-28 7:45 UTC (permalink / raw)
To: barebox
The upstream dts files do not contain the register shift. As
we have Omap specific init code anyway we can just set the register
shift from there instead of relying on the devicetree properties.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/serial/serial_ns16550.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c
index 0c00eb1..a2a25fa 100644
--- a/drivers/serial/serial_ns16550.c
+++ b/drivers/serial/serial_ns16550.c
@@ -194,6 +194,10 @@ static void ns16450_serial_init_port(struct console_device *cdev)
static void ns16550_omap_init_port(struct console_device *cdev)
{
+ struct ns16550_priv *priv = to_ns16550_priv(cdev);
+
+ priv->plat.shift = 2;
+
ns16550_serial_init_port(cdev);
ns16550_write(cdev, 0x07, omap_mdr1); /* Disable */
--
1.9.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 03/12] dts: Use dt-bindings from kernel
2014-04-28 7:45 [PATCH] Add Linux dts files and use them Sascha Hauer
2014-04-28 7:45 ` [PATCH 02/12] serial: ns16550: omap: set register shift from code Sascha Hauer
@ 2014-04-28 7:45 ` Sascha Hauer
2014-04-28 14:22 ` Antony Pavlov
2014-04-30 5:49 ` [PATCH] make: dts: fix out-of-tree build Silvio Fricke
2014-04-28 7:45 ` [PATCH 04/12] dts: i.MX51 efika sb: Roll back pingroup changes Sascha Hauer
` (9 subsequent siblings)
11 siblings, 2 replies; 23+ messages in thread
From: Sascha Hauer @ 2014-04-28 7:45 UTC (permalink / raw)
To: barebox
barebox used to have its own include/dt-bindings with files copied
from the corresponding kernel files. Use upstream dt-bindings directly
instead.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
Makefile | 2 +-
arch/arm/dts/include/dt-bindings | 1 -
include/dt-bindings/clock/ar933x-clk.h | 22 -
include/dt-bindings/clock/imx5-clock.h | 203 --------
include/dt-bindings/clock/tegra20-car.h | 158 -------
include/dt-bindings/gpio/gpio.h | 15 -
include/dt-bindings/gpio/tegra-gpio.h | 50 --
include/dt-bindings/input/input.h | 525 ---------------------
include/dt-bindings/interrupt-controller/arm-gic.h | 22 -
include/dt-bindings/interrupt-controller/irq.h | 19 -
include/dt-bindings/pinctrl/am33xx.h | 42 --
include/dt-bindings/pinctrl/omap.h | 53 ---
scripts/Makefile.lib | 5 +-
13 files changed, 4 insertions(+), 1113 deletions(-)
delete mode 120000 arch/arm/dts/include/dt-bindings
delete mode 100644 include/dt-bindings/clock/ar933x-clk.h
delete mode 100644 include/dt-bindings/clock/imx5-clock.h
delete mode 100644 include/dt-bindings/clock/tegra20-car.h
delete mode 100644 include/dt-bindings/gpio/gpio.h
delete mode 100644 include/dt-bindings/gpio/tegra-gpio.h
delete mode 100644 include/dt-bindings/input/input.h
delete mode 100644 include/dt-bindings/interrupt-controller/arm-gic.h
delete mode 100644 include/dt-bindings/interrupt-controller/irq.h
delete mode 100644 include/dt-bindings/pinctrl/am33xx.h
delete mode 100644 include/dt-bindings/pinctrl/omap.h
diff --git a/Makefile b/Makefile
index 83638a0..a54b82b 100644
--- a/Makefile
+++ b/Makefile
@@ -290,7 +290,7 @@ export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_ve
# Use LINUXINCLUDE when you must reference the include/ directory.
# Needed to be compatible with the O= option
-LINUXINCLUDE := -Iinclude \
+LINUXINCLUDE := -Iinclude -Idts/include \
$(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) \
-I$(srctree)/arch/$(ARCH)/include \
-I$(objtree)/arch/$(ARCH)/include \
diff --git a/arch/arm/dts/include/dt-bindings b/arch/arm/dts/include/dt-bindings
deleted file mode 120000
index 0cecb3d..0000000
--- a/arch/arm/dts/include/dt-bindings
+++ /dev/null
@@ -1 +0,0 @@
-../../../../include/dt-bindings
\ No newline at end of file
diff --git a/include/dt-bindings/clock/ar933x-clk.h b/include/dt-bindings/clock/ar933x-clk.h
deleted file mode 100644
index f048930..0000000
--- a/include/dt-bindings/clock/ar933x-clk.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2014 Antony Pavlov <antonynpavlov@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __DT_BINDINGS_AR933X_CLK_H
-#define __DT_BINDINGS_AR933X_CLK_H
-
-#define AR933X_CLK_REF 0
-#define AR933X_CLK_UART 1
-#define AR933X_CLK_CPU 2
-#define AR933X_CLK_DDR 3
-#define AR933X_CLK_AHB 4
-#define AR933X_CLK_WDT 5
-
-#define AR933X_CLK_END 6
-
-#endif /* __DT_BINDINGS_AR933X_CLK_H */
diff --git a/include/dt-bindings/clock/imx5-clock.h b/include/dt-bindings/clock/imx5-clock.h
deleted file mode 100644
index 5f2667e..0000000
--- a/include/dt-bindings/clock/imx5-clock.h
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * Copyright 2013 Lucas Stach, Pengutronix <l.stach@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __DT_BINDINGS_CLOCK_IMX5_H
-#define __DT_BINDINGS_CLOCK_IMX5_H
-
-#define IMX5_CLK_DUMMY 0
-#define IMX5_CLK_CKIL 1
-#define IMX5_CLK_OSC 2
-#define IMX5_CLK_CKIH1 3
-#define IMX5_CLK_CKIH2 4
-#define IMX5_CLK_AHB 5
-#define IMX5_CLK_IPG 6
-#define IMX5_CLK_AXI_A 7
-#define IMX5_CLK_AXI_B 8
-#define IMX5_CLK_UART_PRED 9
-#define IMX5_CLK_UART_ROOT 10
-#define IMX5_CLK_ESDHC_A_PRED 11
-#define IMX5_CLK_ESDHC_B_PRED 12
-#define IMX5_CLK_ESDHC_C_SEL 13
-#define IMX5_CLK_ESDHC_D_SEL 14
-#define IMX5_CLK_EMI_SEL 15
-#define IMX5_CLK_EMI_SLOW_PODF 16
-#define IMX5_CLK_NFC_PODF 17
-#define IMX5_CLK_ECSPI_PRED 18
-#define IMX5_CLK_ECSPI_PODF 19
-#define IMX5_CLK_USBOH3_PRED 20
-#define IMX5_CLK_USBOH3_PODF 21
-#define IMX5_CLK_USB_PHY_PRED 22
-#define IMX5_CLK_USB_PHY_PODF 23
-#define IMX5_CLK_CPU_PODF 24
-#define IMX5_CLK_DI_PRED 25
-#define IMX5_CLK_TVE_SEL 27
-#define IMX5_CLK_UART1_IPG_GATE 28
-#define IMX5_CLK_UART1_PER_GATE 29
-#define IMX5_CLK_UART2_IPG_GATE 30
-#define IMX5_CLK_UART2_PER_GATE 31
-#define IMX5_CLK_UART3_IPG_GATE 32
-#define IMX5_CLK_UART3_PER_GATE 33
-#define IMX5_CLK_I2C1_GATE 34
-#define IMX5_CLK_I2C2_GATE 35
-#define IMX5_CLK_GPT_IPG_GATE 36
-#define IMX5_CLK_PWM1_IPG_GATE 37
-#define IMX5_CLK_PWM1_HF_GATE 38
-#define IMX5_CLK_PWM2_IPG_GATE 39
-#define IMX5_CLK_PWM2_HF_GATE 40
-#define IMX5_CLK_GPT_HF_GATE 41
-#define IMX5_CLK_FEC_GATE 42
-#define IMX5_CLK_USBOH3_PER_GATE 43
-#define IMX5_CLK_ESDHC1_IPG_GATE 44
-#define IMX5_CLK_ESDHC2_IPG_GATE 45
-#define IMX5_CLK_ESDHC3_IPG_GATE 46
-#define IMX5_CLK_ESDHC4_IPG_GATE 47
-#define IMX5_CLK_SSI1_IPG_GATE 48
-#define IMX5_CLK_SSI2_IPG_GATE 49
-#define IMX5_CLK_SSI3_IPG_GATE 50
-#define IMX5_CLK_ECSPI1_IPG_GATE 51
-#define IMX5_CLK_ECSPI1_PER_GATE 52
-#define IMX5_CLK_ECSPI2_IPG_GATE 53
-#define IMX5_CLK_ECSPI2_PER_GATE 54
-#define IMX5_CLK_CSPI_IPG_GATE 55
-#define IMX5_CLK_SDMA_GATE 56
-#define IMX5_CLK_EMI_SLOW_GATE 57
-#define IMX5_CLK_IPU_SEL 58
-#define IMX5_CLK_IPU_GATE 59
-#define IMX5_CLK_NFC_GATE 60
-#define IMX5_CLK_IPU_DI1_GATE 61
-#define IMX5_CLK_VPU_SEL 62
-#define IMX5_CLK_VPU_GATE 63
-#define IMX5_CLK_VPU_REFERENCE_GATE 64
-#define IMX5_CLK_UART4_IPG_GATE 65
-#define IMX5_CLK_UART4_PER_GATE 66
-#define IMX5_CLK_UART5_IPG_GATE 67
-#define IMX5_CLK_UART5_PER_GATE 68
-#define IMX5_CLK_TVE_GATE 69
-#define IMX5_CLK_TVE_PRED 70
-#define IMX5_CLK_ESDHC1_PER_GATE 71
-#define IMX5_CLK_ESDHC2_PER_GATE 72
-#define IMX5_CLK_ESDHC3_PER_GATE 73
-#define IMX5_CLK_ESDHC4_PER_GATE 74
-#define IMX5_CLK_USB_PHY_GATE 75
-#define IMX5_CLK_HSI2C_GATE 76
-#define IMX5_CLK_MIPI_HSC1_GATE 77
-#define IMX5_CLK_MIPI_HSC2_GATE 78
-#define IMX5_CLK_MIPI_ESC_GATE 79
-#define IMX5_CLK_MIPI_HSP_GATE 80
-#define IMX5_CLK_LDB_DI1_DIV_3_5 81
-#define IMX5_CLK_LDB_DI1_DIV 82
-#define IMX5_CLK_LDB_DI0_DIV_3_5 83
-#define IMX5_CLK_LDB_DI0_DIV 84
-#define IMX5_CLK_LDB_DI1_GATE 85
-#define IMX5_CLK_CAN2_SERIAL_GATE 86
-#define IMX5_CLK_CAN2_IPG_GATE 87
-#define IMX5_CLK_I2C3_GATE 88
-#define IMX5_CLK_LP_APM 89
-#define IMX5_CLK_PERIPH_APM 90
-#define IMX5_CLK_MAIN_BUS 91
-#define IMX5_CLK_AHB_MAX 92
-#define IMX5_CLK_AIPS_TZ1 93
-#define IMX5_CLK_AIPS_TZ2 94
-#define IMX5_CLK_TMAX1 95
-#define IMX5_CLK_TMAX2 96
-#define IMX5_CLK_TMAX3 97
-#define IMX5_CLK_SPBA 98
-#define IMX5_CLK_UART_SEL 99
-#define IMX5_CLK_ESDHC_A_SEL 100
-#define IMX5_CLK_ESDHC_B_SEL 101
-#define IMX5_CLK_ESDHC_A_PODF 102
-#define IMX5_CLK_ESDHC_B_PODF 103
-#define IMX5_CLK_ECSPI_SEL 104
-#define IMX5_CLK_USBOH3_SEL 105
-#define IMX5_CLK_USB_PHY_SEL 106
-#define IMX5_CLK_IIM_GATE 107
-#define IMX5_CLK_USBOH3_GATE 108
-#define IMX5_CLK_EMI_FAST_GATE 109
-#define IMX5_CLK_IPU_DI0_GATE 110
-#define IMX5_CLK_GPC_DVFS 111
-#define IMX5_CLK_PLL1_SW 112
-#define IMX5_CLK_PLL2_SW 113
-#define IMX5_CLK_PLL3_SW 114
-#define IMX5_CLK_IPU_DI0_SEL 115
-#define IMX5_CLK_IPU_DI1_SEL 116
-#define IMX5_CLK_TVE_EXT_SEL 117
-#define IMX5_CLK_MX51_MIPI 118
-#define IMX5_CLK_PLL4_SW 119
-#define IMX5_CLK_LDB_DI1_SEL 120
-#define IMX5_CLK_DI_PLL4_PODF 121
-#define IMX5_CLK_LDB_DI0_SEL 122
-#define IMX5_CLK_LDB_DI0_GATE 123
-#define IMX5_CLK_USB_PHY1_GATE 124
-#define IMX5_CLK_USB_PHY2_GATE 125
-#define IMX5_CLK_PER_LP_APM 126
-#define IMX5_CLK_PER_PRED1 127
-#define IMX5_CLK_PER_PRED2 128
-#define IMX5_CLK_PER_PODF 129
-#define IMX5_CLK_PER_ROOT 130
-#define IMX5_CLK_SSI_APM 131
-#define IMX5_CLK_SSI1_ROOT_SEL 132
-#define IMX5_CLK_SSI2_ROOT_SEL 133
-#define IMX5_CLK_SSI3_ROOT_SEL 134
-#define IMX5_CLK_SSI_EXT1_SEL 135
-#define IMX5_CLK_SSI_EXT2_SEL 136
-#define IMX5_CLK_SSI_EXT1_COM_SEL 137
-#define IMX5_CLK_SSI_EXT2_COM_SEL 138
-#define IMX5_CLK_SSI1_ROOT_PRED 139
-#define IMX5_CLK_SSI1_ROOT_PODF 140
-#define IMX5_CLK_SSI2_ROOT_PRED 141
-#define IMX5_CLK_SSI2_ROOT_PODF 142
-#define IMX5_CLK_SSI_EXT1_PRED 143
-#define IMX5_CLK_SSI_EXT1_PODF 144
-#define IMX5_CLK_SSI_EXT2_PRED 145
-#define IMX5_CLK_SSI_EXT2_PODF 146
-#define IMX5_CLK_SSI1_ROOT_GATE 147
-#define IMX5_CLK_SSI2_ROOT_GATE 148
-#define IMX5_CLK_SSI3_ROOT_GATE 149
-#define IMX5_CLK_SSI_EXT1_GATE 150
-#define IMX5_CLK_SSI_EXT2_GATE 151
-#define IMX5_CLK_EPIT1_IPG_GATE 152
-#define IMX5_CLK_EPIT1_HF_GATE 153
-#define IMX5_CLK_EPIT2_IPG_GATE 154
-#define IMX5_CLK_EPIT2_HF_GATE 155
-#define IMX5_CLK_CAN_SEL 156
-#define IMX5_CLK_CAN1_SERIAL_GATE 157
-#define IMX5_CLK_CAN1_IPG_GATE 158
-#define IMX5_CLK_OWIRE_GATE 159
-#define IMX5_CLK_GPU3D_SEL 160
-#define IMX5_CLK_GPU2D_SEL 161
-#define IMX5_CLK_GPU3D_GATE 162
-#define IMX5_CLK_GPU2D_GATE 163
-#define IMX5_CLK_GARB_GATE 164
-#define IMX5_CLK_CKO1_SEL 165
-#define IMX5_CLK_CKO1_PODF 166
-#define IMX5_CLK_CKO1 167
-#define IMX5_CLK_CKO2_SEL 168
-#define IMX5_CLK_CKO2_PODF 169
-#define IMX5_CLK_CKO2 170
-#define IMX5_CLK_SRTC_GATE 171
-#define IMX5_CLK_PATA_GATE 172
-#define IMX5_CLK_SATA_GATE 173
-#define IMX5_CLK_SPDIF_XTAL_SEL 174
-#define IMX5_CLK_SPDIF0_SEL 175
-#define IMX5_CLK_SPDIF1_SEL 176
-#define IMX5_CLK_SPDIF0_PRED 177
-#define IMX5_CLK_SPDIF0_PODF 178
-#define IMX5_CLK_SPDIF1_PRED 179
-#define IMX5_CLK_SPDIF1_PODF 180
-#define IMX5_CLK_SPDIF0_COM_SEL 181
-#define IMX5_CLK_SPDIF1_COM_SEL 182
-#define IMX5_CLK_SPDIF0_GATE 183
-#define IMX5_CLK_SPDIF1_GATE 184
-#define IMX5_CLK_SPDIF_IPG_GATE 185
-#define IMX5_CLK_OCRAM 186
-#define IMX5_CLK_SAHARA_IPG_GATE 187
-#define IMX5_CLK_SATA_REF 188
-#define IMX5_CLK_END 189
-
-#endif /* __DT_BINDINGS_CLOCK_IMX5_H */
diff --git a/include/dt-bindings/clock/tegra20-car.h b/include/dt-bindings/clock/tegra20-car.h
deleted file mode 100644
index a1ae9a8..0000000
--- a/include/dt-bindings/clock/tegra20-car.h
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * This header provides constants for binding nvidia,tegra20-car.
- *
- * The first 96 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
- * registers. These IDs often match those in the CAR's RST_DEVICES registers,
- * but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
- * this case, those clocks are assigned IDs above 95 in order to highlight
- * this issue. Implementations that interpret these clock IDs as bit values
- * within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
- * explicitly handle these special cases.
- *
- * The balance of the clocks controlled by the CAR are assigned IDs of 96 and
- * above.
- */
-
-#ifndef _DT_BINDINGS_CLOCK_TEGRA20_CAR_H
-#define _DT_BINDINGS_CLOCK_TEGRA20_CAR_H
-
-#define TEGRA20_CLK_CPU 0
-/* 1 */
-/* 2 */
-#define TEGRA20_CLK_AC97 3
-#define TEGRA20_CLK_RTC 4
-#define TEGRA20_CLK_TIMER 5
-#define TEGRA20_CLK_UARTA 6
-/* 7 (register bit affects uart2 and vfir) */
-#define TEGRA20_CLK_GPIO 8
-#define TEGRA20_CLK_SDMMC2 9
-/* 10 (register bit affects spdif_in and spdif_out) */
-#define TEGRA20_CLK_I2S1 11
-#define TEGRA20_CLK_I2C1 12
-#define TEGRA20_CLK_NDFLASH 13
-#define TEGRA20_CLK_SDMMC1 14
-#define TEGRA20_CLK_SDMMC4 15
-#define TEGRA20_CLK_TWC 16
-#define TEGRA20_CLK_PWM 17
-#define TEGRA20_CLK_I2S2 18
-#define TEGRA20_CLK_EPP 19
-/* 20 (register bit affects vi and vi_sensor) */
-#define TEGRA20_CLK_GR2D 21
-#define TEGRA20_CLK_USBD 22
-#define TEGRA20_CLK_ISP 23
-#define TEGRA20_CLK_GR3D 24
-#define TEGRA20_CLK_IDE 25
-#define TEGRA20_CLK_DISP2 26
-#define TEGRA20_CLK_DISP1 27
-#define TEGRA20_CLK_HOST1X 28
-#define TEGRA20_CLK_VCP 29
-/* 30 */
-#define TEGRA20_CLK_CACHE2 31
-
-#define TEGRA20_CLK_MEM 32
-#define TEGRA20_CLK_AHBDMA 33
-#define TEGRA20_CLK_APBDMA 34
-/* 35 */
-#define TEGRA20_CLK_KBC 36
-#define TEGRA20_CLK_STAT_MON 37
-#define TEGRA20_CLK_PMC 38
-#define TEGRA20_CLK_FUSE 39
-#define TEGRA20_CLK_KFUSE 40
-#define TEGRA20_CLK_SBC1 41
-#define TEGRA20_CLK_NOR 42
-#define TEGRA20_CLK_SPI 43
-#define TEGRA20_CLK_SBC2 44
-#define TEGRA20_CLK_XIO 45
-#define TEGRA20_CLK_SBC3 46
-#define TEGRA20_CLK_DVC 47
-#define TEGRA20_CLK_DSI 48
-/* 49 (register bit affects tvo and cve) */
-#define TEGRA20_CLK_MIPI 50
-#define TEGRA20_CLK_HDMI 51
-#define TEGRA20_CLK_CSI 52
-#define TEGRA20_CLK_TVDAC 53
-#define TEGRA20_CLK_I2C2 54
-#define TEGRA20_CLK_UARTC 55
-/* 56 */
-#define TEGRA20_CLK_EMC 57
-#define TEGRA20_CLK_USB2 58
-#define TEGRA20_CLK_USB3 59
-#define TEGRA20_CLK_MPE 60
-#define TEGRA20_CLK_VDE 61
-#define TEGRA20_CLK_BSEA 62
-#define TEGRA20_CLK_BSEV 63
-
-#define TEGRA20_CLK_SPEEDO 64
-#define TEGRA20_CLK_UARTD 65
-#define TEGRA20_CLK_UARTE 66
-#define TEGRA20_CLK_I2C3 67
-#define TEGRA20_CLK_SBC4 68
-#define TEGRA20_CLK_SDMMC3 69
-#define TEGRA20_CLK_PEX 70
-#define TEGRA20_CLK_OWR 71
-#define TEGRA20_CLK_AFI 72
-#define TEGRA20_CLK_CSITE 73
-#define TEGRA20_CLK_PCIE_XCLK 74
-#define TEGRA20_CLK_AVPUCQ 75
-#define TEGRA20_CLK_LA 76
-/* 77 */
-/* 78 */
-/* 79 */
-/* 80 */
-/* 81 */
-/* 82 */
-/* 83 */
-#define TEGRA20_CLK_IRAMA 84
-#define TEGRA20_CLK_IRAMB 85
-#define TEGRA20_CLK_IRAMC 86
-#define TEGRA20_CLK_IRAMD 87
-#define TEGRA20_CLK_CRAM2 88
-#define TEGRA20_CLK_AUDIO_2X 89 /* a/k/a audio_2x_sync_clk */
-#define TEGRA20_CLK_CLK_D 90
-/* 91 */
-#define TEGRA20_CLK_CSUS 92
-#define TEGRA20_CLK_CDEV2 93
-#define TEGRA20_CLK_CDEV1 94
-/* 95 */
-
-#define TEGRA20_CLK_UARTB 96
-#define TEGRA20_CLK_VFIR 97
-#define TEGRA20_CLK_SPDIF_IN 98
-#define TEGRA20_CLK_SPDIF_OUT 99
-#define TEGRA20_CLK_VI 100
-#define TEGRA20_CLK_VI_SENSOR 101
-#define TEGRA20_CLK_TVO 102
-#define TEGRA20_CLK_CVE 103
-#define TEGRA20_CLK_OSC 104
-#define TEGRA20_CLK_CLK_32K 105 /* a/k/a clk_s */
-#define TEGRA20_CLK_CLK_M 106
-#define TEGRA20_CLK_SCLK 107
-#define TEGRA20_CLK_CCLK 108
-#define TEGRA20_CLK_HCLK 109
-#define TEGRA20_CLK_PCLK 110
-#define TEGRA20_CLK_BLINK 111
-#define TEGRA20_CLK_PLL_A 112
-#define TEGRA20_CLK_PLL_A_OUT0 113
-#define TEGRA20_CLK_PLL_C 114
-#define TEGRA20_CLK_PLL_C_OUT1 115
-#define TEGRA20_CLK_PLL_D 116
-#define TEGRA20_CLK_PLL_D_OUT0 117
-#define TEGRA20_CLK_PLL_E 118
-#define TEGRA20_CLK_PLL_M 119
-#define TEGRA20_CLK_PLL_M_OUT1 120
-#define TEGRA20_CLK_PLL_P 121
-#define TEGRA20_CLK_PLL_P_OUT1 122
-#define TEGRA20_CLK_PLL_P_OUT2 123
-#define TEGRA20_CLK_PLL_P_OUT3 124
-#define TEGRA20_CLK_PLL_P_OUT4 125
-#define TEGRA20_CLK_PLL_S 126
-#define TEGRA20_CLK_PLL_U 127
-
-#define TEGRA20_CLK_PLL_X 128
-#define TEGRA20_CLK_COP 129 /* a/k/a avp */
-#define TEGRA20_CLK_AUDIO 130 /* a/k/a audio_sync_clk */
-#define TEGRA20_CLK_PLL_REF 131
-#define TEGRA20_CLK_TWD 132
-#define TEGRA20_CLK_CLK_MAX 133
-
-#endif /* _DT_BINDINGS_CLOCK_TEGRA20_CAR_H */
diff --git a/include/dt-bindings/gpio/gpio.h b/include/dt-bindings/gpio/gpio.h
deleted file mode 100644
index e6b1e0a..0000000
--- a/include/dt-bindings/gpio/gpio.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * This header provides constants for most GPIO bindings.
- *
- * Most GPIO bindings include a flags cell as part of the GPIO specifier.
- * In most cases, the format of the flags cell uses the standard values
- * defined in this header.
- */
-
-#ifndef _DT_BINDINGS_GPIO_GPIO_H
-#define _DT_BINDINGS_GPIO_GPIO_H
-
-#define GPIO_ACTIVE_HIGH 0
-#define GPIO_ACTIVE_LOW 1
-
-#endif
diff --git a/include/dt-bindings/gpio/tegra-gpio.h b/include/dt-bindings/gpio/tegra-gpio.h
deleted file mode 100644
index 4d179c0..0000000
--- a/include/dt-bindings/gpio/tegra-gpio.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * This header provides constants for binding nvidia,tegra*-gpio.
- *
- * The first cell in Tegra's GPIO specifier is the GPIO ID. The macros below
- * provide names for this.
- *
- * The second cell contains standard flag values specified in gpio.h.
- */
-
-#ifndef _DT_BINDINGS_GPIO_TEGRA_GPIO_H
-#define _DT_BINDINGS_GPIO_TEGRA_GPIO_H
-
-#include <dt-bindings/gpio/gpio.h>
-
-#define TEGRA_GPIO_BANK_ID_A 0
-#define TEGRA_GPIO_BANK_ID_B 1
-#define TEGRA_GPIO_BANK_ID_C 2
-#define TEGRA_GPIO_BANK_ID_D 3
-#define TEGRA_GPIO_BANK_ID_E 4
-#define TEGRA_GPIO_BANK_ID_F 5
-#define TEGRA_GPIO_BANK_ID_G 6
-#define TEGRA_GPIO_BANK_ID_H 7
-#define TEGRA_GPIO_BANK_ID_I 8
-#define TEGRA_GPIO_BANK_ID_J 9
-#define TEGRA_GPIO_BANK_ID_K 10
-#define TEGRA_GPIO_BANK_ID_L 11
-#define TEGRA_GPIO_BANK_ID_M 12
-#define TEGRA_GPIO_BANK_ID_N 13
-#define TEGRA_GPIO_BANK_ID_O 14
-#define TEGRA_GPIO_BANK_ID_P 15
-#define TEGRA_GPIO_BANK_ID_Q 16
-#define TEGRA_GPIO_BANK_ID_R 17
-#define TEGRA_GPIO_BANK_ID_S 18
-#define TEGRA_GPIO_BANK_ID_T 19
-#define TEGRA_GPIO_BANK_ID_U 20
-#define TEGRA_GPIO_BANK_ID_V 21
-#define TEGRA_GPIO_BANK_ID_W 22
-#define TEGRA_GPIO_BANK_ID_X 23
-#define TEGRA_GPIO_BANK_ID_Y 24
-#define TEGRA_GPIO_BANK_ID_Z 25
-#define TEGRA_GPIO_BANK_ID_AA 26
-#define TEGRA_GPIO_BANK_ID_BB 27
-#define TEGRA_GPIO_BANK_ID_CC 28
-#define TEGRA_GPIO_BANK_ID_DD 29
-#define TEGRA_GPIO_BANK_ID_EE 30
-
-#define TEGRA_GPIO(bank, offset) \
- ((TEGRA_GPIO_BANK_ID_##bank * 8) + offset)
-
-#endif
diff --git a/include/dt-bindings/input/input.h b/include/dt-bindings/input/input.h
deleted file mode 100644
index 042e7b3..0000000
--- a/include/dt-bindings/input/input.h
+++ /dev/null
@@ -1,525 +0,0 @@
-/*
- * This header provides constants for most input bindings.
- *
- * Most input bindings include key code, matrix key code format.
- * In most cases, key code and matrix key code format uses
- * the standard values/macro defined in this header.
- */
-
-#ifndef _DT_BINDINGS_INPUT_INPUT_H
-#define _DT_BINDINGS_INPUT_INPUT_H
-
-#define KEY_RESERVED 0
-#define KEY_ESC 1
-#define KEY_1 2
-#define KEY_2 3
-#define KEY_3 4
-#define KEY_4 5
-#define KEY_5 6
-#define KEY_6 7
-#define KEY_7 8
-#define KEY_8 9
-#define KEY_9 10
-#define KEY_0 11
-#define KEY_MINUS 12
-#define KEY_EQUAL 13
-#define KEY_BACKSPACE 14
-#define KEY_TAB 15
-#define KEY_Q 16
-#define KEY_W 17
-#define KEY_E 18
-#define KEY_R 19
-#define KEY_T 20
-#define KEY_Y 21
-#define KEY_U 22
-#define KEY_I 23
-#define KEY_O 24
-#define KEY_P 25
-#define KEY_LEFTBRACE 26
-#define KEY_RIGHTBRACE 27
-#define KEY_ENTER 28
-#define KEY_LEFTCTRL 29
-#define KEY_A 30
-#define KEY_S 31
-#define KEY_D 32
-#define KEY_F 33
-#define KEY_G 34
-#define KEY_H 35
-#define KEY_J 36
-#define KEY_K 37
-#define KEY_L 38
-#define KEY_SEMICOLON 39
-#define KEY_APOSTROPHE 40
-#define KEY_GRAVE 41
-#define KEY_LEFTSHIFT 42
-#define KEY_BACKSLASH 43
-#define KEY_Z 44
-#define KEY_X 45
-#define KEY_C 46
-#define KEY_V 47
-#define KEY_B 48
-#define KEY_N 49
-#define KEY_M 50
-#define KEY_COMMA 51
-#define KEY_DOT 52
-#define KEY_SLASH 53
-#define KEY_RIGHTSHIFT 54
-#define KEY_KPASTERISK 55
-#define KEY_LEFTALT 56
-#define KEY_SPACE 57
-#define KEY_CAPSLOCK 58
-#define KEY_F1 59
-#define KEY_F2 60
-#define KEY_F3 61
-#define KEY_F4 62
-#define KEY_F5 63
-#define KEY_F6 64
-#define KEY_F7 65
-#define KEY_F8 66
-#define KEY_F9 67
-#define KEY_F10 68
-#define KEY_NUMLOCK 69
-#define KEY_SCROLLLOCK 70
-#define KEY_KP7 71
-#define KEY_KP8 72
-#define KEY_KP9 73
-#define KEY_KPMINUS 74
-#define KEY_KP4 75
-#define KEY_KP5 76
-#define KEY_KP6 77
-#define KEY_KPPLUS 78
-#define KEY_KP1 79
-#define KEY_KP2 80
-#define KEY_KP3 81
-#define KEY_KP0 82
-#define KEY_KPDOT 83
-
-#define KEY_ZENKAKUHANKAKU 85
-#define KEY_102ND 86
-#define KEY_F11 87
-#define KEY_F12 88
-#define KEY_RO 89
-#define KEY_KATAKANA 90
-#define KEY_HIRAGANA 91
-#define KEY_HENKAN 92
-#define KEY_KATAKANAHIRAGANA 93
-#define KEY_MUHENKAN 94
-#define KEY_KPJPCOMMA 95
-#define KEY_KPENTER 96
-#define KEY_RIGHTCTRL 97
-#define KEY_KPSLASH 98
-#define KEY_SYSRQ 99
-#define KEY_RIGHTALT 100
-#define KEY_LINEFEED 101
-#define KEY_HOME 102
-#define KEY_UP 103
-#define KEY_PAGEUP 104
-#define KEY_LEFT 105
-#define KEY_RIGHT 106
-#define KEY_END 107
-#define KEY_DOWN 108
-#define KEY_PAGEDOWN 109
-#define KEY_INSERT 110
-#define KEY_DELETE 111
-#define KEY_MACRO 112
-#define KEY_MUTE 113
-#define KEY_VOLUMEDOWN 114
-#define KEY_VOLUMEUP 115
-#define KEY_POWER 116 /* SC System Power Down */
-#define KEY_KPEQUAL 117
-#define KEY_KPPLUSMINUS 118
-#define KEY_PAUSE 119
-#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */
-
-#define KEY_KPCOMMA 121
-#define KEY_HANGEUL 122
-#define KEY_HANGUEL KEY_HANGEUL
-#define KEY_HANJA 123
-#define KEY_YEN 124
-#define KEY_LEFTMETA 125
-#define KEY_RIGHTMETA 126
-#define KEY_COMPOSE 127
-
-#define KEY_STOP 128 /* AC Stop */
-#define KEY_AGAIN 129
-#define KEY_PROPS 130 /* AC Properties */
-#define KEY_UNDO 131 /* AC Undo */
-#define KEY_FRONT 132
-#define KEY_COPY 133 /* AC Copy */
-#define KEY_OPEN 134 /* AC Open */
-#define KEY_PASTE 135 /* AC Paste */
-#define KEY_FIND 136 /* AC Search */
-#define KEY_CUT 137 /* AC Cut */
-#define KEY_HELP 138 /* AL Integrated Help Center */
-#define KEY_MENU 139 /* Menu (show menu) */
-#define KEY_CALC 140 /* AL Calculator */
-#define KEY_SETUP 141
-#define KEY_SLEEP 142 /* SC System Sleep */
-#define KEY_WAKEUP 143 /* System Wake Up */
-#define KEY_FILE 144 /* AL Local Machine Browser */
-#define KEY_SENDFILE 145
-#define KEY_DELETEFILE 146
-#define KEY_XFER 147
-#define KEY_PROG1 148
-#define KEY_PROG2 149
-#define KEY_WWW 150 /* AL Internet Browser */
-#define KEY_MSDOS 151
-#define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */
-#define KEY_SCREENLOCK KEY_COFFEE
-#define KEY_DIRECTION 153
-#define KEY_CYCLEWINDOWS 154
-#define KEY_MAIL 155
-#define KEY_BOOKMARKS 156 /* AC Bookmarks */
-#define KEY_COMPUTER 157
-#define KEY_BACK 158 /* AC Back */
-#define KEY_FORWARD 159 /* AC Forward */
-#define KEY_CLOSECD 160
-#define KEY_EJECTCD 161
-#define KEY_EJECTCLOSECD 162
-#define KEY_NEXTSONG 163
-#define KEY_PLAYPAUSE 164
-#define KEY_PREVIOUSSONG 165
-#define KEY_STOPCD 166
-#define KEY_RECORD 167
-#define KEY_REWIND 168
-#define KEY_PHONE 169 /* Media Select Telephone */
-#define KEY_ISO 170
-#define KEY_CONFIG 171 /* AL Consumer Control Configuration */
-#define KEY_HOMEPAGE 172 /* AC Home */
-#define KEY_REFRESH 173 /* AC Refresh */
-#define KEY_EXIT 174 /* AC Exit */
-#define KEY_MOVE 175
-#define KEY_EDIT 176
-#define KEY_SCROLLUP 177
-#define KEY_SCROLLDOWN 178
-#define KEY_KPLEFTPAREN 179
-#define KEY_KPRIGHTPAREN 180
-#define KEY_NEW 181 /* AC New */
-#define KEY_REDO 182 /* AC Redo/Repeat */
-
-#define KEY_F13 183
-#define KEY_F14 184
-#define KEY_F15 185
-#define KEY_F16 186
-#define KEY_F17 187
-#define KEY_F18 188
-#define KEY_F19 189
-#define KEY_F20 190
-#define KEY_F21 191
-#define KEY_F22 192
-#define KEY_F23 193
-#define KEY_F24 194
-
-#define KEY_PLAYCD 200
-#define KEY_PAUSECD 201
-#define KEY_PROG3 202
-#define KEY_PROG4 203
-#define KEY_DASHBOARD 204 /* AL Dashboard */
-#define KEY_SUSPEND 205
-#define KEY_CLOSE 206 /* AC Close */
-#define KEY_PLAY 207
-#define KEY_FASTFORWARD 208
-#define KEY_BASSBOOST 209
-#define KEY_PRINT 210 /* AC Print */
-#define KEY_HP 211
-#define KEY_CAMERA 212
-#define KEY_SOUND 213
-#define KEY_QUESTION 214
-#define KEY_EMAIL 215
-#define KEY_CHAT 216
-#define KEY_SEARCH 217
-#define KEY_CONNECT 218
-#define KEY_FINANCE 219 /* AL Checkbook/Finance */
-#define KEY_SPORT 220
-#define KEY_SHOP 221
-#define KEY_ALTERASE 222
-#define KEY_CANCEL 223 /* AC Cancel */
-#define KEY_BRIGHTNESSDOWN 224
-#define KEY_BRIGHTNESSUP 225
-#define KEY_MEDIA 226
-
-#define KEY_SWITCHVIDEOMODE 227 /* Cycle between available video
- outputs (Monitor/LCD/TV-out/etc) */
-#define KEY_KBDILLUMTOGGLE 228
-#define KEY_KBDILLUMDOWN 229
-#define KEY_KBDILLUMUP 230
-
-#define KEY_SEND 231 /* AC Send */
-#define KEY_REPLY 232 /* AC Reply */
-#define KEY_FORWARDMAIL 233 /* AC Forward Msg */
-#define KEY_SAVE 234 /* AC Save */
-#define KEY_DOCUMENTS 235
-
-#define KEY_BATTERY 236
-
-#define KEY_BLUETOOTH 237
-#define KEY_WLAN 238
-#define KEY_UWB 239
-
-#define KEY_UNKNOWN 240
-
-#define KEY_VIDEO_NEXT 241 /* drive next video source */
-#define KEY_VIDEO_PREV 242 /* drive previous video source */
-#define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */
-#define KEY_BRIGHTNESS_ZERO 244 /* brightness off, use ambient */
-#define KEY_DISPLAY_OFF 245 /* display device to off state */
-
-#define KEY_WIMAX 246
-#define KEY_RFKILL 247 /* Key that controls all radios */
-
-#define KEY_MICMUTE 248 /* Mute / unmute the microphone */
-
-/* Code 255 is reserved for special needs of AT keyboard driver */
-
-#define BTN_MISC 0x100
-#define BTN_0 0x100
-#define BTN_1 0x101
-#define BTN_2 0x102
-#define BTN_3 0x103
-#define BTN_4 0x104
-#define BTN_5 0x105
-#define BTN_6 0x106
-#define BTN_7 0x107
-#define BTN_8 0x108
-#define BTN_9 0x109
-
-#define BTN_MOUSE 0x110
-#define BTN_LEFT 0x110
-#define BTN_RIGHT 0x111
-#define BTN_MIDDLE 0x112
-#define BTN_SIDE 0x113
-#define BTN_EXTRA 0x114
-#define BTN_FORWARD 0x115
-#define BTN_BACK 0x116
-#define BTN_TASK 0x117
-
-#define BTN_JOYSTICK 0x120
-#define BTN_TRIGGER 0x120
-#define BTN_THUMB 0x121
-#define BTN_THUMB2 0x122
-#define BTN_TOP 0x123
-#define BTN_TOP2 0x124
-#define BTN_PINKIE 0x125
-#define BTN_BASE 0x126
-#define BTN_BASE2 0x127
-#define BTN_BASE3 0x128
-#define BTN_BASE4 0x129
-#define BTN_BASE5 0x12a
-#define BTN_BASE6 0x12b
-#define BTN_DEAD 0x12f
-
-#define BTN_GAMEPAD 0x130
-#define BTN_SOUTH 0x130
-#define BTN_A BTN_SOUTH
-#define BTN_EAST 0x131
-#define BTN_B BTN_EAST
-#define BTN_C 0x132
-#define BTN_NORTH 0x133
-#define BTN_X BTN_NORTH
-#define BTN_WEST 0x134
-#define BTN_Y BTN_WEST
-#define BTN_Z 0x135
-#define BTN_TL 0x136
-#define BTN_TR 0x137
-#define BTN_TL2 0x138
-#define BTN_TR2 0x139
-#define BTN_SELECT 0x13a
-#define BTN_START 0x13b
-#define BTN_MODE 0x13c
-#define BTN_THUMBL 0x13d
-#define BTN_THUMBR 0x13e
-
-#define BTN_DIGI 0x140
-#define BTN_TOOL_PEN 0x140
-#define BTN_TOOL_RUBBER 0x141
-#define BTN_TOOL_BRUSH 0x142
-#define BTN_TOOL_PENCIL 0x143
-#define BTN_TOOL_AIRBRUSH 0x144
-#define BTN_TOOL_FINGER 0x145
-#define BTN_TOOL_MOUSE 0x146
-#define BTN_TOOL_LENS 0x147
-#define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */
-#define BTN_TOUCH 0x14a
-#define BTN_STYLUS 0x14b
-#define BTN_STYLUS2 0x14c
-#define BTN_TOOL_DOUBLETAP 0x14d
-#define BTN_TOOL_TRIPLETAP 0x14e
-#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */
-
-#define BTN_WHEEL 0x150
-#define BTN_GEAR_DOWN 0x150
-#define BTN_GEAR_UP 0x151
-
-#define KEY_OK 0x160
-#define KEY_SELECT 0x161
-#define KEY_GOTO 0x162
-#define KEY_CLEAR 0x163
-#define KEY_POWER2 0x164
-#define KEY_OPTION 0x165
-#define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */
-#define KEY_TIME 0x167
-#define KEY_VENDOR 0x168
-#define KEY_ARCHIVE 0x169
-#define KEY_PROGRAM 0x16a /* Media Select Program Guide */
-#define KEY_CHANNEL 0x16b
-#define KEY_FAVORITES 0x16c
-#define KEY_EPG 0x16d
-#define KEY_PVR 0x16e /* Media Select Home */
-#define KEY_MHP 0x16f
-#define KEY_LANGUAGE 0x170
-#define KEY_TITLE 0x171
-#define KEY_SUBTITLE 0x172
-#define KEY_ANGLE 0x173
-#define KEY_ZOOM 0x174
-#define KEY_MODE 0x175
-#define KEY_KEYBOARD 0x176
-#define KEY_SCREEN 0x177
-#define KEY_PC 0x178 /* Media Select Computer */
-#define KEY_TV 0x179 /* Media Select TV */
-#define KEY_TV2 0x17a /* Media Select Cable */
-#define KEY_VCR 0x17b /* Media Select VCR */
-#define KEY_VCR2 0x17c /* VCR Plus */
-#define KEY_SAT 0x17d /* Media Select Satellite */
-#define KEY_SAT2 0x17e
-#define KEY_CD 0x17f /* Media Select CD */
-#define KEY_TAPE 0x180 /* Media Select Tape */
-#define KEY_RADIO 0x181
-#define KEY_TUNER 0x182 /* Media Select Tuner */
-#define KEY_PLAYER 0x183
-#define KEY_TEXT 0x184
-#define KEY_DVD 0x185 /* Media Select DVD */
-#define KEY_AUX 0x186
-#define KEY_MP3 0x187
-#define KEY_AUDIO 0x188 /* AL Audio Browser */
-#define KEY_VIDEO 0x189 /* AL Movie Browser */
-#define KEY_DIRECTORY 0x18a
-#define KEY_LIST 0x18b
-#define KEY_MEMO 0x18c /* Media Select Messages */
-#define KEY_CALENDAR 0x18d
-#define KEY_RED 0x18e
-#define KEY_GREEN 0x18f
-#define KEY_YELLOW 0x190
-#define KEY_BLUE 0x191
-#define KEY_CHANNELUP 0x192 /* Channel Increment */
-#define KEY_CHANNELDOWN 0x193 /* Channel Decrement */
-#define KEY_FIRST 0x194
-#define KEY_LAST 0x195 /* Recall Last */
-#define KEY_AB 0x196
-#define KEY_NEXT 0x197
-#define KEY_RESTART 0x198
-#define KEY_SLOW 0x199
-#define KEY_SHUFFLE 0x19a
-#define KEY_BREAK 0x19b
-#define KEY_PREVIOUS 0x19c
-#define KEY_DIGITS 0x19d
-#define KEY_TEEN 0x19e
-#define KEY_TWEN 0x19f
-#define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */
-#define KEY_GAMES 0x1a1 /* Media Select Games */
-#define KEY_ZOOMIN 0x1a2 /* AC Zoom In */
-#define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */
-#define KEY_ZOOMRESET 0x1a4 /* AC Zoom */
-#define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */
-#define KEY_EDITOR 0x1a6 /* AL Text Editor */
-#define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */
-#define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */
-#define KEY_PRESENTATION 0x1a9 /* AL Presentation App */
-#define KEY_DATABASE 0x1aa /* AL Database App */
-#define KEY_NEWS 0x1ab /* AL Newsreader */
-#define KEY_VOICEMAIL 0x1ac /* AL Voicemail */
-#define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */
-#define KEY_MESSENGER 0x1ae /* AL Instant Messaging */
-#define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */
-#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */
-#define KEY_LOGOFF 0x1b1 /* AL Logoff */
-
-#define KEY_DOLLAR 0x1b2
-#define KEY_EURO 0x1b3
-
-#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */
-#define KEY_FRAMEFORWARD 0x1b5
-#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */
-#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */
-#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */
-#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */
-#define KEY_IMAGES 0x1ba /* AL Image Browser */
-
-#define KEY_DEL_EOL 0x1c0
-#define KEY_DEL_EOS 0x1c1
-#define KEY_INS_LINE 0x1c2
-#define KEY_DEL_LINE 0x1c3
-
-#define KEY_FN 0x1d0
-#define KEY_FN_ESC 0x1d1
-#define KEY_FN_F1 0x1d2
-#define KEY_FN_F2 0x1d3
-#define KEY_FN_F3 0x1d4
-#define KEY_FN_F4 0x1d5
-#define KEY_FN_F5 0x1d6
-#define KEY_FN_F6 0x1d7
-#define KEY_FN_F7 0x1d8
-#define KEY_FN_F8 0x1d9
-#define KEY_FN_F9 0x1da
-#define KEY_FN_F10 0x1db
-#define KEY_FN_F11 0x1dc
-#define KEY_FN_F12 0x1dd
-#define KEY_FN_1 0x1de
-#define KEY_FN_2 0x1df
-#define KEY_FN_D 0x1e0
-#define KEY_FN_E 0x1e1
-#define KEY_FN_F 0x1e2
-#define KEY_FN_S 0x1e3
-#define KEY_FN_B 0x1e4
-
-#define KEY_BRL_DOT1 0x1f1
-#define KEY_BRL_DOT2 0x1f2
-#define KEY_BRL_DOT3 0x1f3
-#define KEY_BRL_DOT4 0x1f4
-#define KEY_BRL_DOT5 0x1f5
-#define KEY_BRL_DOT6 0x1f6
-#define KEY_BRL_DOT7 0x1f7
-#define KEY_BRL_DOT8 0x1f8
-#define KEY_BRL_DOT9 0x1f9
-#define KEY_BRL_DOT10 0x1fa
-
-#define KEY_NUMERIC_0 0x200 /* used by phones, remote controls, */
-#define KEY_NUMERIC_1 0x201 /* and other keypads */
-#define KEY_NUMERIC_2 0x202
-#define KEY_NUMERIC_3 0x203
-#define KEY_NUMERIC_4 0x204
-#define KEY_NUMERIC_5 0x205
-#define KEY_NUMERIC_6 0x206
-#define KEY_NUMERIC_7 0x207
-#define KEY_NUMERIC_8 0x208
-#define KEY_NUMERIC_9 0x209
-#define KEY_NUMERIC_STAR 0x20a
-#define KEY_NUMERIC_POUND 0x20b
-
-#define KEY_CAMERA_FOCUS 0x210
-#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */
-
-#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */
-#define KEY_TOUCHPAD_ON 0x213
-#define KEY_TOUCHPAD_OFF 0x214
-
-#define KEY_CAMERA_ZOOMIN 0x215
-#define KEY_CAMERA_ZOOMOUT 0x216
-#define KEY_CAMERA_UP 0x217
-#define KEY_CAMERA_DOWN 0x218
-#define KEY_CAMERA_LEFT 0x219
-#define KEY_CAMERA_RIGHT 0x21a
-
-#define KEY_ATTENDANT_ON 0x21b
-#define KEY_ATTENDANT_OFF 0x21c
-#define KEY_ATTENDANT_TOGGLE 0x21d /* Attendant call on or off */
-#define KEY_LIGHTS_TOGGLE 0x21e /* Reading light on or off */
-
-#define BTN_DPAD_UP 0x220
-#define BTN_DPAD_DOWN 0x221
-#define BTN_DPAD_LEFT 0x222
-#define BTN_DPAD_RIGHT 0x223
-
-#define MATRIX_KEY(row, col, code) \
- ((((row) & 0xFF) << 24) | (((col) & 0xFF) << 16) | ((code) & 0xFFFF))
-
-#endif /* _DT_BINDINGS_INPUT_INPUT_H */
diff --git a/include/dt-bindings/interrupt-controller/arm-gic.h b/include/dt-bindings/interrupt-controller/arm-gic.h
deleted file mode 100644
index 1ea1b70..0000000
--- a/include/dt-bindings/interrupt-controller/arm-gic.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * This header provides constants for the ARM GIC.
- */
-
-#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_ARM_GIC_H
-#define _DT_BINDINGS_INTERRUPT_CONTROLLER_ARM_GIC_H
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/* interrupt specific cell 0 */
-
-#define GIC_SPI 0
-#define GIC_PPI 1
-
-/*
- * Interrupt specifier cell 2.
- * The flaggs in irq.h are valid, plus those below.
- */
-#define GIC_CPU_MASK_RAW(x) ((x) << 8)
-#define GIC_CPU_MASK_SIMPLE(num) GIC_CPU_MASK_RAW((1 << (num)) - 1)
-
-#endif
diff --git a/include/dt-bindings/interrupt-controller/irq.h b/include/dt-bindings/interrupt-controller/irq.h
deleted file mode 100644
index 33a1003..0000000
--- a/include/dt-bindings/interrupt-controller/irq.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * This header provides constants for most IRQ bindings.
- *
- * Most IRQ bindings include a flags cell as part of the IRQ specifier.
- * In most cases, the format of the flags cell uses the standard values
- * defined in this header.
- */
-
-#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_IRQ_H
-#define _DT_BINDINGS_INTERRUPT_CONTROLLER_IRQ_H
-
-#define IRQ_TYPE_NONE 0
-#define IRQ_TYPE_EDGE_RISING 1
-#define IRQ_TYPE_EDGE_FALLING 2
-#define IRQ_TYPE_EDGE_BOTH (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)
-#define IRQ_TYPE_LEVEL_HIGH 4
-#define IRQ_TYPE_LEVEL_LOW 8
-
-#endif
diff --git a/include/dt-bindings/pinctrl/am33xx.h b/include/dt-bindings/pinctrl/am33xx.h
deleted file mode 100644
index 2fbc804..0000000
--- a/include/dt-bindings/pinctrl/am33xx.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * This header provides constants specific to AM33XX pinctrl bindings.
- */
-
-#ifndef _DT_BINDINGS_PINCTRL_AM33XX_H
-#define _DT_BINDINGS_PINCTRL_AM33XX_H
-
-#include <dt-bindings/pinctrl/omap.h>
-
-/* am33xx specific mux bit defines */
-#undef PULL_ENA
-#undef INPUT_EN
-
-#define PULL_DISABLE (1 << 3)
-#define INPUT_EN (1 << 5)
-#define SLEWCTRL_FAST (1 << 6)
-
-/* update macro depending on INPUT_EN and PULL_ENA */
-#undef PIN_OUTPUT
-#undef PIN_OUTPUT_PULLUP
-#undef PIN_OUTPUT_PULLDOWN
-#undef PIN_INPUT
-#undef PIN_INPUT_PULLUP
-#undef PIN_INPUT_PULLDOWN
-
-#define PIN_OUTPUT (PULL_DISABLE)
-#define PIN_OUTPUT_PULLUP (PULL_UP)
-#define PIN_OUTPUT_PULLDOWN 0
-#define PIN_INPUT (INPUT_EN | PULL_DISABLE)
-#define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP)
-#define PIN_INPUT_PULLDOWN (INPUT_EN)
-
-/* undef non-existing modes */
-#undef PIN_OFF_NONE
-#undef PIN_OFF_OUTPUT_HIGH
-#undef PIN_OFF_OUTPUT_LOW
-#undef PIN_OFF_INPUT_PULLUP
-#undef PIN_OFF_INPUT_PULLDOWN
-#undef PIN_OFF_WAKEUPENABLE
-
-#endif
-
diff --git a/include/dt-bindings/pinctrl/omap.h b/include/dt-bindings/pinctrl/omap.h
deleted file mode 100644
index bed35e3..0000000
--- a/include/dt-bindings/pinctrl/omap.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * This header provides constants for OMAP pinctrl bindings.
- *
- * Copyright (C) 2009 Nokia
- * Copyright (C) 2009-2010 Texas Instruments
- */
-
-#ifndef _DT_BINDINGS_PINCTRL_OMAP_H
-#define _DT_BINDINGS_PINCTRL_OMAP_H
-
-/* 34xx mux mode options for each pin. See TRM for options */
-#define MUX_MODE0 0
-#define MUX_MODE1 1
-#define MUX_MODE2 2
-#define MUX_MODE3 3
-#define MUX_MODE4 4
-#define MUX_MODE5 5
-#define MUX_MODE6 6
-#define MUX_MODE7 7
-
-/* 24xx/34xx mux bit defines */
-#define PULL_ENA (1 << 3)
-#define PULL_UP (1 << 4)
-#define ALTELECTRICALSEL (1 << 5)
-
-/* omap3/4/5 specific mux bit defines */
-#define INPUT_EN (1 << 8)
-#define OFF_EN (1 << 9)
-#define OFFOUT_EN (1 << 10)
-#define OFFOUT_VAL (1 << 11)
-#define OFF_PULL_EN (1 << 12)
-#define OFF_PULL_UP (1 << 13)
-#define WAKEUP_EN (1 << 14)
-#define WAKEUP_EVENT (1 << 15)
-
-/* Active pin states */
-#define PIN_OUTPUT 0
-#define PIN_OUTPUT_PULLUP (PIN_OUTPUT | PULL_ENA | PULL_UP)
-#define PIN_OUTPUT_PULLDOWN (PIN_OUTPUT | PULL_ENA)
-#define PIN_INPUT INPUT_EN
-#define PIN_INPUT_PULLUP (PULL_ENA | INPUT_EN | PULL_UP)
-#define PIN_INPUT_PULLDOWN (PULL_ENA | INPUT_EN)
-
-/* Off mode states */
-#define PIN_OFF_NONE 0
-#define PIN_OFF_OUTPUT_HIGH (OFF_EN | OFFOUT_EN | OFFOUT_VAL)
-#define PIN_OFF_OUTPUT_LOW (OFF_EN | OFFOUT_EN)
-#define PIN_OFF_INPUT_PULLUP (OFF_EN | OFF_PULL_EN | OFF_PULL_UP)
-#define PIN_OFF_INPUT_PULLDOWN (OFF_EN | OFF_PULL_EN)
-#define PIN_OFF_WAKEUPENABLE WAKEUP_EN
-
-#endif
-
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index cf7e2d5..8170b38 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -146,8 +146,8 @@ cpp_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(__cpp_flags)
ld_flags = $(LDFLAGS) $(EXTRA_LDFLAGS)
dtc_cpp_flags = -Wp,-MD,$(depfile).pre -nostdinc \
- -I$(srctree)/arch/$(SRCARCH)/dts \
- -I$(srctree)/arch/$(SRCARCH)/dts/include \
+ -I$(srctree)/dts/include \
+ -I$(srctree)/dts/src/ \
-undef -D__DTS__
# Finds the multi-part object the current object will be linked into
@@ -222,6 +222,7 @@ quiet_cmd_dtc = DTC $@
cmd_dtc = $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
$(objtree)/scripts/dtc/dtc -O dtb -o $@ -b 0 \
-i $(srctree)/arch/$(SRCARCH)/dts $(DTC_FLAGS) \
+ -i $(srctree)/dts/src/$(SRCARCH) \
-d $(depfile).dtc $(dtc-tmp) ; \
cat $(depfile).pre $(depfile).dtc > $(depfile)
--
1.9.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 03/12] dts: Use dt-bindings from kernel
2014-04-28 7:45 ` [PATCH 03/12] dts: Use dt-bindings from kernel Sascha Hauer
@ 2014-04-28 14:22 ` Antony Pavlov
2014-04-28 18:33 ` Sascha Hauer
2014-04-30 5:49 ` [PATCH] make: dts: fix out-of-tree build Silvio Fricke
1 sibling, 1 reply; 23+ messages in thread
From: Antony Pavlov @ 2014-04-28 14:22 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox
On Mon, 28 Apr 2014 09:45:52 +0200
Sascha Hauer <s.hauer@pengutronix.de> wrote:
> barebox used to have its own include/dt-bindings with files copied
> from the corresponding kernel files. Use upstream dt-bindings directly
> instead.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
> Makefile | 2 +-
> arch/arm/dts/include/dt-bindings | 1 -
> include/dt-bindings/clock/ar933x-clk.h | 22 -
> include/dt-bindings/clock/imx5-clock.h | 203 --------
> include/dt-bindings/clock/tegra20-car.h | 158 -------
> include/dt-bindings/gpio/gpio.h | 15 -
> include/dt-bindings/gpio/tegra-gpio.h | 50 --
> include/dt-bindings/input/input.h | 525 ---------------------
> include/dt-bindings/interrupt-controller/arm-gic.h | 22 -
> include/dt-bindings/interrupt-controller/irq.h | 19 -
> include/dt-bindings/pinctrl/am33xx.h | 42 --
> include/dt-bindings/pinctrl/omap.h | 53 ---
> scripts/Makefile.lib | 5 +-
> 13 files changed, 4 insertions(+), 1113 deletions(-)
> delete mode 120000 arch/arm/dts/include/dt-bindings
> delete mode 100644 include/dt-bindings/clock/ar933x-clk.h
> delete mode 100644 include/dt-bindings/clock/imx5-clock.h
> delete mode 100644 include/dt-bindings/clock/tegra20-car.h
> delete mode 100644 include/dt-bindings/gpio/gpio.h
> delete mode 100644 include/dt-bindings/gpio/tegra-gpio.h
> delete mode 100644 include/dt-bindings/input/input.h
> delete mode 100644 include/dt-bindings/interrupt-controller/arm-gic.h
> delete mode 100644 include/dt-bindings/interrupt-controller/irq.h
> delete mode 100644 include/dt-bindings/pinctrl/am33xx.h
> delete mode 100644 include/dt-bindings/pinctrl/omap.h
>
> diff --git a/Makefile b/Makefile
> index 83638a0..a54b82b 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -290,7 +290,7 @@ export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_ve
>
> # Use LINUXINCLUDE when you must reference the include/ directory.
> # Needed to be compatible with the O= option
> -LINUXINCLUDE := -Iinclude \
> +LINUXINCLUDE := -Iinclude -Idts/include \
> $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) \
> -I$(srctree)/arch/$(ARCH)/include \
> -I$(objtree)/arch/$(ARCH)/include \
> diff --git a/arch/arm/dts/include/dt-bindings b/arch/arm/dts/include/dt-bindings
> deleted file mode 120000
> index 0cecb3d..0000000
> --- a/arch/arm/dts/include/dt-bindings
> +++ /dev/null
> @@ -1 +0,0 @@
> -../../../../include/dt-bindings
> \ No newline at end of file
> diff --git a/include/dt-bindings/clock/ar933x-clk.h b/include/dt-bindings/clock/ar933x-clk.h
> deleted file mode 100644
> index f048930..0000000
> --- a/include/dt-bindings/clock/ar933x-clk.h
> +++ /dev/null
There is no device tree support for ar933x in mainline linux!
Please get this file back.
> @@ -1,22 +0,0 @@
> -/*
> - * Copyright (C) 2014 Antony Pavlov <antonynpavlov@gmail.com>
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> - *
> - */
> -
> -#ifndef __DT_BINDINGS_AR933X_CLK_H
> -#define __DT_BINDINGS_AR933X_CLK_H
> -
> -#define AR933X_CLK_REF 0
> -#define AR933X_CLK_UART 1
> -#define AR933X_CLK_CPU 2
> -#define AR933X_CLK_DDR 3
> -#define AR933X_CLK_AHB 4
> -#define AR933X_CLK_WDT 5
> -
> -#define AR933X_CLK_END 6
> -
> -#endif /* __DT_BINDINGS_AR933X_CLK_H */
> diff --git a/include/dt-bindings/clock/imx5-clock.h b/include/dt-bindings/clock/imx5-clock.h
> deleted file mode 100644
> index 5f2667e..0000000
> --- a/include/dt-bindings/clock/imx5-clock.h
> +++ /dev/null
> @@ -1,203 +0,0 @@
> -/*
> - * Copyright 2013 Lucas Stach, Pengutronix <l.stach@pengutronix.de>
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> - *
> - */
> -
> -#ifndef __DT_BINDINGS_CLOCK_IMX5_H
> -#define __DT_BINDINGS_CLOCK_IMX5_H
> -
> -#define IMX5_CLK_DUMMY 0
> -#define IMX5_CLK_CKIL 1
> -#define IMX5_CLK_OSC 2
> -#define IMX5_CLK_CKIH1 3
> -#define IMX5_CLK_CKIH2 4
> -#define IMX5_CLK_AHB 5
> -#define IMX5_CLK_IPG 6
> -#define IMX5_CLK_AXI_A 7
> -#define IMX5_CLK_AXI_B 8
> -#define IMX5_CLK_UART_PRED 9
> -#define IMX5_CLK_UART_ROOT 10
> -#define IMX5_CLK_ESDHC_A_PRED 11
> -#define IMX5_CLK_ESDHC_B_PRED 12
> -#define IMX5_CLK_ESDHC_C_SEL 13
> -#define IMX5_CLK_ESDHC_D_SEL 14
> -#define IMX5_CLK_EMI_SEL 15
> -#define IMX5_CLK_EMI_SLOW_PODF 16
> -#define IMX5_CLK_NFC_PODF 17
> -#define IMX5_CLK_ECSPI_PRED 18
> -#define IMX5_CLK_ECSPI_PODF 19
> -#define IMX5_CLK_USBOH3_PRED 20
> -#define IMX5_CLK_USBOH3_PODF 21
> -#define IMX5_CLK_USB_PHY_PRED 22
> -#define IMX5_CLK_USB_PHY_PODF 23
> -#define IMX5_CLK_CPU_PODF 24
> -#define IMX5_CLK_DI_PRED 25
> -#define IMX5_CLK_TVE_SEL 27
> -#define IMX5_CLK_UART1_IPG_GATE 28
> -#define IMX5_CLK_UART1_PER_GATE 29
> -#define IMX5_CLK_UART2_IPG_GATE 30
> -#define IMX5_CLK_UART2_PER_GATE 31
> -#define IMX5_CLK_UART3_IPG_GATE 32
> -#define IMX5_CLK_UART3_PER_GATE 33
> -#define IMX5_CLK_I2C1_GATE 34
> -#define IMX5_CLK_I2C2_GATE 35
> -#define IMX5_CLK_GPT_IPG_GATE 36
> -#define IMX5_CLK_PWM1_IPG_GATE 37
> -#define IMX5_CLK_PWM1_HF_GATE 38
> -#define IMX5_CLK_PWM2_IPG_GATE 39
> -#define IMX5_CLK_PWM2_HF_GATE 40
> -#define IMX5_CLK_GPT_HF_GATE 41
> -#define IMX5_CLK_FEC_GATE 42
> -#define IMX5_CLK_USBOH3_PER_GATE 43
> -#define IMX5_CLK_ESDHC1_IPG_GATE 44
> -#define IMX5_CLK_ESDHC2_IPG_GATE 45
> -#define IMX5_CLK_ESDHC3_IPG_GATE 46
> -#define IMX5_CLK_ESDHC4_IPG_GATE 47
> -#define IMX5_CLK_SSI1_IPG_GATE 48
> -#define IMX5_CLK_SSI2_IPG_GATE 49
> -#define IMX5_CLK_SSI3_IPG_GATE 50
> -#define IMX5_CLK_ECSPI1_IPG_GATE 51
> -#define IMX5_CLK_ECSPI1_PER_GATE 52
> -#define IMX5_CLK_ECSPI2_IPG_GATE 53
> -#define IMX5_CLK_ECSPI2_PER_GATE 54
> -#define IMX5_CLK_CSPI_IPG_GATE 55
> -#define IMX5_CLK_SDMA_GATE 56
> -#define IMX5_CLK_EMI_SLOW_GATE 57
> -#define IMX5_CLK_IPU_SEL 58
> -#define IMX5_CLK_IPU_GATE 59
> -#define IMX5_CLK_NFC_GATE 60
> -#define IMX5_CLK_IPU_DI1_GATE 61
> -#define IMX5_CLK_VPU_SEL 62
> -#define IMX5_CLK_VPU_GATE 63
> -#define IMX5_CLK_VPU_REFERENCE_GATE 64
> -#define IMX5_CLK_UART4_IPG_GATE 65
> -#define IMX5_CLK_UART4_PER_GATE 66
> -#define IMX5_CLK_UART5_IPG_GATE 67
> -#define IMX5_CLK_UART5_PER_GATE 68
> -#define IMX5_CLK_TVE_GATE 69
> -#define IMX5_CLK_TVE_PRED 70
> -#define IMX5_CLK_ESDHC1_PER_GATE 71
> -#define IMX5_CLK_ESDHC2_PER_GATE 72
> -#define IMX5_CLK_ESDHC3_PER_GATE 73
> -#define IMX5_CLK_ESDHC4_PER_GATE 74
> -#define IMX5_CLK_USB_PHY_GATE 75
> -#define IMX5_CLK_HSI2C_GATE 76
> -#define IMX5_CLK_MIPI_HSC1_GATE 77
> -#define IMX5_CLK_MIPI_HSC2_GATE 78
> -#define IMX5_CLK_MIPI_ESC_GATE 79
> -#define IMX5_CLK_MIPI_HSP_GATE 80
> -#define IMX5_CLK_LDB_DI1_DIV_3_5 81
> -#define IMX5_CLK_LDB_DI1_DIV 82
> -#define IMX5_CLK_LDB_DI0_DIV_3_5 83
> -#define IMX5_CLK_LDB_DI0_DIV 84
> -#define IMX5_CLK_LDB_DI1_GATE 85
> -#define IMX5_CLK_CAN2_SERIAL_GATE 86
> -#define IMX5_CLK_CAN2_IPG_GATE 87
> -#define IMX5_CLK_I2C3_GATE 88
> -#define IMX5_CLK_LP_APM 89
> -#define IMX5_CLK_PERIPH_APM 90
> -#define IMX5_CLK_MAIN_BUS 91
> -#define IMX5_CLK_AHB_MAX 92
> -#define IMX5_CLK_AIPS_TZ1 93
> -#define IMX5_CLK_AIPS_TZ2 94
> -#define IMX5_CLK_TMAX1 95
> -#define IMX5_CLK_TMAX2 96
> -#define IMX5_CLK_TMAX3 97
> -#define IMX5_CLK_SPBA 98
> -#define IMX5_CLK_UART_SEL 99
> -#define IMX5_CLK_ESDHC_A_SEL 100
> -#define IMX5_CLK_ESDHC_B_SEL 101
> -#define IMX5_CLK_ESDHC_A_PODF 102
> -#define IMX5_CLK_ESDHC_B_PODF 103
> -#define IMX5_CLK_ECSPI_SEL 104
> -#define IMX5_CLK_USBOH3_SEL 105
> -#define IMX5_CLK_USB_PHY_SEL 106
> -#define IMX5_CLK_IIM_GATE 107
> -#define IMX5_CLK_USBOH3_GATE 108
> -#define IMX5_CLK_EMI_FAST_GATE 109
> -#define IMX5_CLK_IPU_DI0_GATE 110
> -#define IMX5_CLK_GPC_DVFS 111
> -#define IMX5_CLK_PLL1_SW 112
> -#define IMX5_CLK_PLL2_SW 113
> -#define IMX5_CLK_PLL3_SW 114
> -#define IMX5_CLK_IPU_DI0_SEL 115
> -#define IMX5_CLK_IPU_DI1_SEL 116
> -#define IMX5_CLK_TVE_EXT_SEL 117
> -#define IMX5_CLK_MX51_MIPI 118
> -#define IMX5_CLK_PLL4_SW 119
> -#define IMX5_CLK_LDB_DI1_SEL 120
> -#define IMX5_CLK_DI_PLL4_PODF 121
> -#define IMX5_CLK_LDB_DI0_SEL 122
> -#define IMX5_CLK_LDB_DI0_GATE 123
> -#define IMX5_CLK_USB_PHY1_GATE 124
> -#define IMX5_CLK_USB_PHY2_GATE 125
> -#define IMX5_CLK_PER_LP_APM 126
> -#define IMX5_CLK_PER_PRED1 127
> -#define IMX5_CLK_PER_PRED2 128
> -#define IMX5_CLK_PER_PODF 129
> -#define IMX5_CLK_PER_ROOT 130
> -#define IMX5_CLK_SSI_APM 131
> -#define IMX5_CLK_SSI1_ROOT_SEL 132
> -#define IMX5_CLK_SSI2_ROOT_SEL 133
> -#define IMX5_CLK_SSI3_ROOT_SEL 134
> -#define IMX5_CLK_SSI_EXT1_SEL 135
> -#define IMX5_CLK_SSI_EXT2_SEL 136
> -#define IMX5_CLK_SSI_EXT1_COM_SEL 137
> -#define IMX5_CLK_SSI_EXT2_COM_SEL 138
> -#define IMX5_CLK_SSI1_ROOT_PRED 139
> -#define IMX5_CLK_SSI1_ROOT_PODF 140
> -#define IMX5_CLK_SSI2_ROOT_PRED 141
> -#define IMX5_CLK_SSI2_ROOT_PODF 142
> -#define IMX5_CLK_SSI_EXT1_PRED 143
> -#define IMX5_CLK_SSI_EXT1_PODF 144
> -#define IMX5_CLK_SSI_EXT2_PRED 145
> -#define IMX5_CLK_SSI_EXT2_PODF 146
> -#define IMX5_CLK_SSI1_ROOT_GATE 147
> -#define IMX5_CLK_SSI2_ROOT_GATE 148
> -#define IMX5_CLK_SSI3_ROOT_GATE 149
> -#define IMX5_CLK_SSI_EXT1_GATE 150
> -#define IMX5_CLK_SSI_EXT2_GATE 151
> -#define IMX5_CLK_EPIT1_IPG_GATE 152
> -#define IMX5_CLK_EPIT1_HF_GATE 153
> -#define IMX5_CLK_EPIT2_IPG_GATE 154
> -#define IMX5_CLK_EPIT2_HF_GATE 155
> -#define IMX5_CLK_CAN_SEL 156
> -#define IMX5_CLK_CAN1_SERIAL_GATE 157
> -#define IMX5_CLK_CAN1_IPG_GATE 158
> -#define IMX5_CLK_OWIRE_GATE 159
> -#define IMX5_CLK_GPU3D_SEL 160
> -#define IMX5_CLK_GPU2D_SEL 161
> -#define IMX5_CLK_GPU3D_GATE 162
> -#define IMX5_CLK_GPU2D_GATE 163
> -#define IMX5_CLK_GARB_GATE 164
> -#define IMX5_CLK_CKO1_SEL 165
> -#define IMX5_CLK_CKO1_PODF 166
> -#define IMX5_CLK_CKO1 167
> -#define IMX5_CLK_CKO2_SEL 168
> -#define IMX5_CLK_CKO2_PODF 169
> -#define IMX5_CLK_CKO2 170
> -#define IMX5_CLK_SRTC_GATE 171
> -#define IMX5_CLK_PATA_GATE 172
> -#define IMX5_CLK_SATA_GATE 173
> -#define IMX5_CLK_SPDIF_XTAL_SEL 174
> -#define IMX5_CLK_SPDIF0_SEL 175
> -#define IMX5_CLK_SPDIF1_SEL 176
> -#define IMX5_CLK_SPDIF0_PRED 177
> -#define IMX5_CLK_SPDIF0_PODF 178
> -#define IMX5_CLK_SPDIF1_PRED 179
> -#define IMX5_CLK_SPDIF1_PODF 180
> -#define IMX5_CLK_SPDIF0_COM_SEL 181
> -#define IMX5_CLK_SPDIF1_COM_SEL 182
> -#define IMX5_CLK_SPDIF0_GATE 183
> -#define IMX5_CLK_SPDIF1_GATE 184
> -#define IMX5_CLK_SPDIF_IPG_GATE 185
> -#define IMX5_CLK_OCRAM 186
> -#define IMX5_CLK_SAHARA_IPG_GATE 187
> -#define IMX5_CLK_SATA_REF 188
> -#define IMX5_CLK_END 189
> -
> -#endif /* __DT_BINDINGS_CLOCK_IMX5_H */
> diff --git a/include/dt-bindings/clock/tegra20-car.h b/include/dt-bindings/clock/tegra20-car.h
> deleted file mode 100644
> index a1ae9a8..0000000
> --- a/include/dt-bindings/clock/tegra20-car.h
> +++ /dev/null
> @@ -1,158 +0,0 @@
> -/*
> - * This header provides constants for binding nvidia,tegra20-car.
> - *
> - * The first 96 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
> - * registers. These IDs often match those in the CAR's RST_DEVICES registers,
> - * but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
> - * this case, those clocks are assigned IDs above 95 in order to highlight
> - * this issue. Implementations that interpret these clock IDs as bit values
> - * within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
> - * explicitly handle these special cases.
> - *
> - * The balance of the clocks controlled by the CAR are assigned IDs of 96 and
> - * above.
> - */
> -
> -#ifndef _DT_BINDINGS_CLOCK_TEGRA20_CAR_H
> -#define _DT_BINDINGS_CLOCK_TEGRA20_CAR_H
> -
> -#define TEGRA20_CLK_CPU 0
> -/* 1 */
> -/* 2 */
> -#define TEGRA20_CLK_AC97 3
> -#define TEGRA20_CLK_RTC 4
> -#define TEGRA20_CLK_TIMER 5
> -#define TEGRA20_CLK_UARTA 6
> -/* 7 (register bit affects uart2 and vfir) */
> -#define TEGRA20_CLK_GPIO 8
> -#define TEGRA20_CLK_SDMMC2 9
> -/* 10 (register bit affects spdif_in and spdif_out) */
> -#define TEGRA20_CLK_I2S1 11
> -#define TEGRA20_CLK_I2C1 12
> -#define TEGRA20_CLK_NDFLASH 13
> -#define TEGRA20_CLK_SDMMC1 14
> -#define TEGRA20_CLK_SDMMC4 15
> -#define TEGRA20_CLK_TWC 16
> -#define TEGRA20_CLK_PWM 17
> -#define TEGRA20_CLK_I2S2 18
> -#define TEGRA20_CLK_EPP 19
> -/* 20 (register bit affects vi and vi_sensor) */
> -#define TEGRA20_CLK_GR2D 21
> -#define TEGRA20_CLK_USBD 22
> -#define TEGRA20_CLK_ISP 23
> -#define TEGRA20_CLK_GR3D 24
> -#define TEGRA20_CLK_IDE 25
> -#define TEGRA20_CLK_DISP2 26
> -#define TEGRA20_CLK_DISP1 27
> -#define TEGRA20_CLK_HOST1X 28
> -#define TEGRA20_CLK_VCP 29
> -/* 30 */
> -#define TEGRA20_CLK_CACHE2 31
> -
> -#define TEGRA20_CLK_MEM 32
> -#define TEGRA20_CLK_AHBDMA 33
> -#define TEGRA20_CLK_APBDMA 34
> -/* 35 */
> -#define TEGRA20_CLK_KBC 36
> -#define TEGRA20_CLK_STAT_MON 37
> -#define TEGRA20_CLK_PMC 38
> -#define TEGRA20_CLK_FUSE 39
> -#define TEGRA20_CLK_KFUSE 40
> -#define TEGRA20_CLK_SBC1 41
> -#define TEGRA20_CLK_NOR 42
> -#define TEGRA20_CLK_SPI 43
> -#define TEGRA20_CLK_SBC2 44
> -#define TEGRA20_CLK_XIO 45
> -#define TEGRA20_CLK_SBC3 46
> -#define TEGRA20_CLK_DVC 47
> -#define TEGRA20_CLK_DSI 48
> -/* 49 (register bit affects tvo and cve) */
> -#define TEGRA20_CLK_MIPI 50
> -#define TEGRA20_CLK_HDMI 51
> -#define TEGRA20_CLK_CSI 52
> -#define TEGRA20_CLK_TVDAC 53
> -#define TEGRA20_CLK_I2C2 54
> -#define TEGRA20_CLK_UARTC 55
> -/* 56 */
> -#define TEGRA20_CLK_EMC 57
> -#define TEGRA20_CLK_USB2 58
> -#define TEGRA20_CLK_USB3 59
> -#define TEGRA20_CLK_MPE 60
> -#define TEGRA20_CLK_VDE 61
> -#define TEGRA20_CLK_BSEA 62
> -#define TEGRA20_CLK_BSEV 63
> -
> -#define TEGRA20_CLK_SPEEDO 64
> -#define TEGRA20_CLK_UARTD 65
> -#define TEGRA20_CLK_UARTE 66
> -#define TEGRA20_CLK_I2C3 67
> -#define TEGRA20_CLK_SBC4 68
> -#define TEGRA20_CLK_SDMMC3 69
> -#define TEGRA20_CLK_PEX 70
> -#define TEGRA20_CLK_OWR 71
> -#define TEGRA20_CLK_AFI 72
> -#define TEGRA20_CLK_CSITE 73
> -#define TEGRA20_CLK_PCIE_XCLK 74
> -#define TEGRA20_CLK_AVPUCQ 75
> -#define TEGRA20_CLK_LA 76
> -/* 77 */
> -/* 78 */
> -/* 79 */
> -/* 80 */
> -/* 81 */
> -/* 82 */
> -/* 83 */
> -#define TEGRA20_CLK_IRAMA 84
> -#define TEGRA20_CLK_IRAMB 85
> -#define TEGRA20_CLK_IRAMC 86
> -#define TEGRA20_CLK_IRAMD 87
> -#define TEGRA20_CLK_CRAM2 88
> -#define TEGRA20_CLK_AUDIO_2X 89 /* a/k/a audio_2x_sync_clk */
> -#define TEGRA20_CLK_CLK_D 90
> -/* 91 */
> -#define TEGRA20_CLK_CSUS 92
> -#define TEGRA20_CLK_CDEV2 93
> -#define TEGRA20_CLK_CDEV1 94
> -/* 95 */
> -
> -#define TEGRA20_CLK_UARTB 96
> -#define TEGRA20_CLK_VFIR 97
> -#define TEGRA20_CLK_SPDIF_IN 98
> -#define TEGRA20_CLK_SPDIF_OUT 99
> -#define TEGRA20_CLK_VI 100
> -#define TEGRA20_CLK_VI_SENSOR 101
> -#define TEGRA20_CLK_TVO 102
> -#define TEGRA20_CLK_CVE 103
> -#define TEGRA20_CLK_OSC 104
> -#define TEGRA20_CLK_CLK_32K 105 /* a/k/a clk_s */
> -#define TEGRA20_CLK_CLK_M 106
> -#define TEGRA20_CLK_SCLK 107
> -#define TEGRA20_CLK_CCLK 108
> -#define TEGRA20_CLK_HCLK 109
> -#define TEGRA20_CLK_PCLK 110
> -#define TEGRA20_CLK_BLINK 111
> -#define TEGRA20_CLK_PLL_A 112
> -#define TEGRA20_CLK_PLL_A_OUT0 113
> -#define TEGRA20_CLK_PLL_C 114
> -#define TEGRA20_CLK_PLL_C_OUT1 115
> -#define TEGRA20_CLK_PLL_D 116
> -#define TEGRA20_CLK_PLL_D_OUT0 117
> -#define TEGRA20_CLK_PLL_E 118
> -#define TEGRA20_CLK_PLL_M 119
> -#define TEGRA20_CLK_PLL_M_OUT1 120
> -#define TEGRA20_CLK_PLL_P 121
> -#define TEGRA20_CLK_PLL_P_OUT1 122
> -#define TEGRA20_CLK_PLL_P_OUT2 123
> -#define TEGRA20_CLK_PLL_P_OUT3 124
> -#define TEGRA20_CLK_PLL_P_OUT4 125
> -#define TEGRA20_CLK_PLL_S 126
> -#define TEGRA20_CLK_PLL_U 127
> -
> -#define TEGRA20_CLK_PLL_X 128
> -#define TEGRA20_CLK_COP 129 /* a/k/a avp */
> -#define TEGRA20_CLK_AUDIO 130 /* a/k/a audio_sync_clk */
> -#define TEGRA20_CLK_PLL_REF 131
> -#define TEGRA20_CLK_TWD 132
> -#define TEGRA20_CLK_CLK_MAX 133
> -
> -#endif /* _DT_BINDINGS_CLOCK_TEGRA20_CAR_H */
> diff --git a/include/dt-bindings/gpio/gpio.h b/include/dt-bindings/gpio/gpio.h
> deleted file mode 100644
> index e6b1e0a..0000000
> --- a/include/dt-bindings/gpio/gpio.h
> +++ /dev/null
> @@ -1,15 +0,0 @@
> -/*
> - * This header provides constants for most GPIO bindings.
> - *
> - * Most GPIO bindings include a flags cell as part of the GPIO specifier.
> - * In most cases, the format of the flags cell uses the standard values
> - * defined in this header.
> - */
> -
> -#ifndef _DT_BINDINGS_GPIO_GPIO_H
> -#define _DT_BINDINGS_GPIO_GPIO_H
> -
> -#define GPIO_ACTIVE_HIGH 0
> -#define GPIO_ACTIVE_LOW 1
> -
> -#endif
> diff --git a/include/dt-bindings/gpio/tegra-gpio.h b/include/dt-bindings/gpio/tegra-gpio.h
> deleted file mode 100644
> index 4d179c0..0000000
> --- a/include/dt-bindings/gpio/tegra-gpio.h
> +++ /dev/null
> @@ -1,50 +0,0 @@
> -/*
> - * This header provides constants for binding nvidia,tegra*-gpio.
> - *
> - * The first cell in Tegra's GPIO specifier is the GPIO ID. The macros below
> - * provide names for this.
> - *
> - * The second cell contains standard flag values specified in gpio.h.
> - */
> -
> -#ifndef _DT_BINDINGS_GPIO_TEGRA_GPIO_H
> -#define _DT_BINDINGS_GPIO_TEGRA_GPIO_H
> -
> -#include <dt-bindings/gpio/gpio.h>
> -
> -#define TEGRA_GPIO_BANK_ID_A 0
> -#define TEGRA_GPIO_BANK_ID_B 1
> -#define TEGRA_GPIO_BANK_ID_C 2
> -#define TEGRA_GPIO_BANK_ID_D 3
> -#define TEGRA_GPIO_BANK_ID_E 4
> -#define TEGRA_GPIO_BANK_ID_F 5
> -#define TEGRA_GPIO_BANK_ID_G 6
> -#define TEGRA_GPIO_BANK_ID_H 7
> -#define TEGRA_GPIO_BANK_ID_I 8
> -#define TEGRA_GPIO_BANK_ID_J 9
> -#define TEGRA_GPIO_BANK_ID_K 10
> -#define TEGRA_GPIO_BANK_ID_L 11
> -#define TEGRA_GPIO_BANK_ID_M 12
> -#define TEGRA_GPIO_BANK_ID_N 13
> -#define TEGRA_GPIO_BANK_ID_O 14
> -#define TEGRA_GPIO_BANK_ID_P 15
> -#define TEGRA_GPIO_BANK_ID_Q 16
> -#define TEGRA_GPIO_BANK_ID_R 17
> -#define TEGRA_GPIO_BANK_ID_S 18
> -#define TEGRA_GPIO_BANK_ID_T 19
> -#define TEGRA_GPIO_BANK_ID_U 20
> -#define TEGRA_GPIO_BANK_ID_V 21
> -#define TEGRA_GPIO_BANK_ID_W 22
> -#define TEGRA_GPIO_BANK_ID_X 23
> -#define TEGRA_GPIO_BANK_ID_Y 24
> -#define TEGRA_GPIO_BANK_ID_Z 25
> -#define TEGRA_GPIO_BANK_ID_AA 26
> -#define TEGRA_GPIO_BANK_ID_BB 27
> -#define TEGRA_GPIO_BANK_ID_CC 28
> -#define TEGRA_GPIO_BANK_ID_DD 29
> -#define TEGRA_GPIO_BANK_ID_EE 30
> -
> -#define TEGRA_GPIO(bank, offset) \
> - ((TEGRA_GPIO_BANK_ID_##bank * 8) + offset)
> -
> -#endif
> diff --git a/include/dt-bindings/input/input.h b/include/dt-bindings/input/input.h
> deleted file mode 100644
> index 042e7b3..0000000
> --- a/include/dt-bindings/input/input.h
> +++ /dev/null
> @@ -1,525 +0,0 @@
> -/*
> - * This header provides constants for most input bindings.
> - *
> - * Most input bindings include key code, matrix key code format.
> - * In most cases, key code and matrix key code format uses
> - * the standard values/macro defined in this header.
> - */
> -
> -#ifndef _DT_BINDINGS_INPUT_INPUT_H
> -#define _DT_BINDINGS_INPUT_INPUT_H
> -
> -#define KEY_RESERVED 0
> -#define KEY_ESC 1
> -#define KEY_1 2
> -#define KEY_2 3
> -#define KEY_3 4
> -#define KEY_4 5
> -#define KEY_5 6
> -#define KEY_6 7
> -#define KEY_7 8
> -#define KEY_8 9
> -#define KEY_9 10
> -#define KEY_0 11
> -#define KEY_MINUS 12
> -#define KEY_EQUAL 13
> -#define KEY_BACKSPACE 14
> -#define KEY_TAB 15
> -#define KEY_Q 16
> -#define KEY_W 17
> -#define KEY_E 18
> -#define KEY_R 19
> -#define KEY_T 20
> -#define KEY_Y 21
> -#define KEY_U 22
> -#define KEY_I 23
> -#define KEY_O 24
> -#define KEY_P 25
> -#define KEY_LEFTBRACE 26
> -#define KEY_RIGHTBRACE 27
> -#define KEY_ENTER 28
> -#define KEY_LEFTCTRL 29
> -#define KEY_A 30
> -#define KEY_S 31
> -#define KEY_D 32
> -#define KEY_F 33
> -#define KEY_G 34
> -#define KEY_H 35
> -#define KEY_J 36
> -#define KEY_K 37
> -#define KEY_L 38
> -#define KEY_SEMICOLON 39
> -#define KEY_APOSTROPHE 40
> -#define KEY_GRAVE 41
> -#define KEY_LEFTSHIFT 42
> -#define KEY_BACKSLASH 43
> -#define KEY_Z 44
> -#define KEY_X 45
> -#define KEY_C 46
> -#define KEY_V 47
> -#define KEY_B 48
> -#define KEY_N 49
> -#define KEY_M 50
> -#define KEY_COMMA 51
> -#define KEY_DOT 52
> -#define KEY_SLASH 53
> -#define KEY_RIGHTSHIFT 54
> -#define KEY_KPASTERISK 55
> -#define KEY_LEFTALT 56
> -#define KEY_SPACE 57
> -#define KEY_CAPSLOCK 58
> -#define KEY_F1 59
> -#define KEY_F2 60
> -#define KEY_F3 61
> -#define KEY_F4 62
> -#define KEY_F5 63
> -#define KEY_F6 64
> -#define KEY_F7 65
> -#define KEY_F8 66
> -#define KEY_F9 67
> -#define KEY_F10 68
> -#define KEY_NUMLOCK 69
> -#define KEY_SCROLLLOCK 70
> -#define KEY_KP7 71
> -#define KEY_KP8 72
> -#define KEY_KP9 73
> -#define KEY_KPMINUS 74
> -#define KEY_KP4 75
> -#define KEY_KP5 76
> -#define KEY_KP6 77
> -#define KEY_KPPLUS 78
> -#define KEY_KP1 79
> -#define KEY_KP2 80
> -#define KEY_KP3 81
> -#define KEY_KP0 82
> -#define KEY_KPDOT 83
> -
> -#define KEY_ZENKAKUHANKAKU 85
> -#define KEY_102ND 86
> -#define KEY_F11 87
> -#define KEY_F12 88
> -#define KEY_RO 89
> -#define KEY_KATAKANA 90
> -#define KEY_HIRAGANA 91
> -#define KEY_HENKAN 92
> -#define KEY_KATAKANAHIRAGANA 93
> -#define KEY_MUHENKAN 94
> -#define KEY_KPJPCOMMA 95
> -#define KEY_KPENTER 96
> -#define KEY_RIGHTCTRL 97
> -#define KEY_KPSLASH 98
> -#define KEY_SYSRQ 99
> -#define KEY_RIGHTALT 100
> -#define KEY_LINEFEED 101
> -#define KEY_HOME 102
> -#define KEY_UP 103
> -#define KEY_PAGEUP 104
> -#define KEY_LEFT 105
> -#define KEY_RIGHT 106
> -#define KEY_END 107
> -#define KEY_DOWN 108
> -#define KEY_PAGEDOWN 109
> -#define KEY_INSERT 110
> -#define KEY_DELETE 111
> -#define KEY_MACRO 112
> -#define KEY_MUTE 113
> -#define KEY_VOLUMEDOWN 114
> -#define KEY_VOLUMEUP 115
> -#define KEY_POWER 116 /* SC System Power Down */
> -#define KEY_KPEQUAL 117
> -#define KEY_KPPLUSMINUS 118
> -#define KEY_PAUSE 119
> -#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */
> -
> -#define KEY_KPCOMMA 121
> -#define KEY_HANGEUL 122
> -#define KEY_HANGUEL KEY_HANGEUL
> -#define KEY_HANJA 123
> -#define KEY_YEN 124
> -#define KEY_LEFTMETA 125
> -#define KEY_RIGHTMETA 126
> -#define KEY_COMPOSE 127
> -
> -#define KEY_STOP 128 /* AC Stop */
> -#define KEY_AGAIN 129
> -#define KEY_PROPS 130 /* AC Properties */
> -#define KEY_UNDO 131 /* AC Undo */
> -#define KEY_FRONT 132
> -#define KEY_COPY 133 /* AC Copy */
> -#define KEY_OPEN 134 /* AC Open */
> -#define KEY_PASTE 135 /* AC Paste */
> -#define KEY_FIND 136 /* AC Search */
> -#define KEY_CUT 137 /* AC Cut */
> -#define KEY_HELP 138 /* AL Integrated Help Center */
> -#define KEY_MENU 139 /* Menu (show menu) */
> -#define KEY_CALC 140 /* AL Calculator */
> -#define KEY_SETUP 141
> -#define KEY_SLEEP 142 /* SC System Sleep */
> -#define KEY_WAKEUP 143 /* System Wake Up */
> -#define KEY_FILE 144 /* AL Local Machine Browser */
> -#define KEY_SENDFILE 145
> -#define KEY_DELETEFILE 146
> -#define KEY_XFER 147
> -#define KEY_PROG1 148
> -#define KEY_PROG2 149
> -#define KEY_WWW 150 /* AL Internet Browser */
> -#define KEY_MSDOS 151
> -#define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */
> -#define KEY_SCREENLOCK KEY_COFFEE
> -#define KEY_DIRECTION 153
> -#define KEY_CYCLEWINDOWS 154
> -#define KEY_MAIL 155
> -#define KEY_BOOKMARKS 156 /* AC Bookmarks */
> -#define KEY_COMPUTER 157
> -#define KEY_BACK 158 /* AC Back */
> -#define KEY_FORWARD 159 /* AC Forward */
> -#define KEY_CLOSECD 160
> -#define KEY_EJECTCD 161
> -#define KEY_EJECTCLOSECD 162
> -#define KEY_NEXTSONG 163
> -#define KEY_PLAYPAUSE 164
> -#define KEY_PREVIOUSSONG 165
> -#define KEY_STOPCD 166
> -#define KEY_RECORD 167
> -#define KEY_REWIND 168
> -#define KEY_PHONE 169 /* Media Select Telephone */
> -#define KEY_ISO 170
> -#define KEY_CONFIG 171 /* AL Consumer Control Configuration */
> -#define KEY_HOMEPAGE 172 /* AC Home */
> -#define KEY_REFRESH 173 /* AC Refresh */
> -#define KEY_EXIT 174 /* AC Exit */
> -#define KEY_MOVE 175
> -#define KEY_EDIT 176
> -#define KEY_SCROLLUP 177
> -#define KEY_SCROLLDOWN 178
> -#define KEY_KPLEFTPAREN 179
> -#define KEY_KPRIGHTPAREN 180
> -#define KEY_NEW 181 /* AC New */
> -#define KEY_REDO 182 /* AC Redo/Repeat */
> -
> -#define KEY_F13 183
> -#define KEY_F14 184
> -#define KEY_F15 185
> -#define KEY_F16 186
> -#define KEY_F17 187
> -#define KEY_F18 188
> -#define KEY_F19 189
> -#define KEY_F20 190
> -#define KEY_F21 191
> -#define KEY_F22 192
> -#define KEY_F23 193
> -#define KEY_F24 194
> -
> -#define KEY_PLAYCD 200
> -#define KEY_PAUSECD 201
> -#define KEY_PROG3 202
> -#define KEY_PROG4 203
> -#define KEY_DASHBOARD 204 /* AL Dashboard */
> -#define KEY_SUSPEND 205
> -#define KEY_CLOSE 206 /* AC Close */
> -#define KEY_PLAY 207
> -#define KEY_FASTFORWARD 208
> -#define KEY_BASSBOOST 209
> -#define KEY_PRINT 210 /* AC Print */
> -#define KEY_HP 211
> -#define KEY_CAMERA 212
> -#define KEY_SOUND 213
> -#define KEY_QUESTION 214
> -#define KEY_EMAIL 215
> -#define KEY_CHAT 216
> -#define KEY_SEARCH 217
> -#define KEY_CONNECT 218
> -#define KEY_FINANCE 219 /* AL Checkbook/Finance */
> -#define KEY_SPORT 220
> -#define KEY_SHOP 221
> -#define KEY_ALTERASE 222
> -#define KEY_CANCEL 223 /* AC Cancel */
> -#define KEY_BRIGHTNESSDOWN 224
> -#define KEY_BRIGHTNESSUP 225
> -#define KEY_MEDIA 226
> -
> -#define KEY_SWITCHVIDEOMODE 227 /* Cycle between available video
> - outputs (Monitor/LCD/TV-out/etc) */
> -#define KEY_KBDILLUMTOGGLE 228
> -#define KEY_KBDILLUMDOWN 229
> -#define KEY_KBDILLUMUP 230
> -
> -#define KEY_SEND 231 /* AC Send */
> -#define KEY_REPLY 232 /* AC Reply */
> -#define KEY_FORWARDMAIL 233 /* AC Forward Msg */
> -#define KEY_SAVE 234 /* AC Save */
> -#define KEY_DOCUMENTS 235
> -
> -#define KEY_BATTERY 236
> -
> -#define KEY_BLUETOOTH 237
> -#define KEY_WLAN 238
> -#define KEY_UWB 239
> -
> -#define KEY_UNKNOWN 240
> -
> -#define KEY_VIDEO_NEXT 241 /* drive next video source */
> -#define KEY_VIDEO_PREV 242 /* drive previous video source */
> -#define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */
> -#define KEY_BRIGHTNESS_ZERO 244 /* brightness off, use ambient */
> -#define KEY_DISPLAY_OFF 245 /* display device to off state */
> -
> -#define KEY_WIMAX 246
> -#define KEY_RFKILL 247 /* Key that controls all radios */
> -
> -#define KEY_MICMUTE 248 /* Mute / unmute the microphone */
> -
> -/* Code 255 is reserved for special needs of AT keyboard driver */
> -
> -#define BTN_MISC 0x100
> -#define BTN_0 0x100
> -#define BTN_1 0x101
> -#define BTN_2 0x102
> -#define BTN_3 0x103
> -#define BTN_4 0x104
> -#define BTN_5 0x105
> -#define BTN_6 0x106
> -#define BTN_7 0x107
> -#define BTN_8 0x108
> -#define BTN_9 0x109
> -
> -#define BTN_MOUSE 0x110
> -#define BTN_LEFT 0x110
> -#define BTN_RIGHT 0x111
> -#define BTN_MIDDLE 0x112
> -#define BTN_SIDE 0x113
> -#define BTN_EXTRA 0x114
> -#define BTN_FORWARD 0x115
> -#define BTN_BACK 0x116
> -#define BTN_TASK 0x117
> -
> -#define BTN_JOYSTICK 0x120
> -#define BTN_TRIGGER 0x120
> -#define BTN_THUMB 0x121
> -#define BTN_THUMB2 0x122
> -#define BTN_TOP 0x123
> -#define BTN_TOP2 0x124
> -#define BTN_PINKIE 0x125
> -#define BTN_BASE 0x126
> -#define BTN_BASE2 0x127
> -#define BTN_BASE3 0x128
> -#define BTN_BASE4 0x129
> -#define BTN_BASE5 0x12a
> -#define BTN_BASE6 0x12b
> -#define BTN_DEAD 0x12f
> -
> -#define BTN_GAMEPAD 0x130
> -#define BTN_SOUTH 0x130
> -#define BTN_A BTN_SOUTH
> -#define BTN_EAST 0x131
> -#define BTN_B BTN_EAST
> -#define BTN_C 0x132
> -#define BTN_NORTH 0x133
> -#define BTN_X BTN_NORTH
> -#define BTN_WEST 0x134
> -#define BTN_Y BTN_WEST
> -#define BTN_Z 0x135
> -#define BTN_TL 0x136
> -#define BTN_TR 0x137
> -#define BTN_TL2 0x138
> -#define BTN_TR2 0x139
> -#define BTN_SELECT 0x13a
> -#define BTN_START 0x13b
> -#define BTN_MODE 0x13c
> -#define BTN_THUMBL 0x13d
> -#define BTN_THUMBR 0x13e
> -
> -#define BTN_DIGI 0x140
> -#define BTN_TOOL_PEN 0x140
> -#define BTN_TOOL_RUBBER 0x141
> -#define BTN_TOOL_BRUSH 0x142
> -#define BTN_TOOL_PENCIL 0x143
> -#define BTN_TOOL_AIRBRUSH 0x144
> -#define BTN_TOOL_FINGER 0x145
> -#define BTN_TOOL_MOUSE 0x146
> -#define BTN_TOOL_LENS 0x147
> -#define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */
> -#define BTN_TOUCH 0x14a
> -#define BTN_STYLUS 0x14b
> -#define BTN_STYLUS2 0x14c
> -#define BTN_TOOL_DOUBLETAP 0x14d
> -#define BTN_TOOL_TRIPLETAP 0x14e
> -#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */
> -
> -#define BTN_WHEEL 0x150
> -#define BTN_GEAR_DOWN 0x150
> -#define BTN_GEAR_UP 0x151
> -
> -#define KEY_OK 0x160
> -#define KEY_SELECT 0x161
> -#define KEY_GOTO 0x162
> -#define KEY_CLEAR 0x163
> -#define KEY_POWER2 0x164
> -#define KEY_OPTION 0x165
> -#define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */
> -#define KEY_TIME 0x167
> -#define KEY_VENDOR 0x168
> -#define KEY_ARCHIVE 0x169
> -#define KEY_PROGRAM 0x16a /* Media Select Program Guide */
> -#define KEY_CHANNEL 0x16b
> -#define KEY_FAVORITES 0x16c
> -#define KEY_EPG 0x16d
> -#define KEY_PVR 0x16e /* Media Select Home */
> -#define KEY_MHP 0x16f
> -#define KEY_LANGUAGE 0x170
> -#define KEY_TITLE 0x171
> -#define KEY_SUBTITLE 0x172
> -#define KEY_ANGLE 0x173
> -#define KEY_ZOOM 0x174
> -#define KEY_MODE 0x175
> -#define KEY_KEYBOARD 0x176
> -#define KEY_SCREEN 0x177
> -#define KEY_PC 0x178 /* Media Select Computer */
> -#define KEY_TV 0x179 /* Media Select TV */
> -#define KEY_TV2 0x17a /* Media Select Cable */
> -#define KEY_VCR 0x17b /* Media Select VCR */
> -#define KEY_VCR2 0x17c /* VCR Plus */
> -#define KEY_SAT 0x17d /* Media Select Satellite */
> -#define KEY_SAT2 0x17e
> -#define KEY_CD 0x17f /* Media Select CD */
> -#define KEY_TAPE 0x180 /* Media Select Tape */
> -#define KEY_RADIO 0x181
> -#define KEY_TUNER 0x182 /* Media Select Tuner */
> -#define KEY_PLAYER 0x183
> -#define KEY_TEXT 0x184
> -#define KEY_DVD 0x185 /* Media Select DVD */
> -#define KEY_AUX 0x186
> -#define KEY_MP3 0x187
> -#define KEY_AUDIO 0x188 /* AL Audio Browser */
> -#define KEY_VIDEO 0x189 /* AL Movie Browser */
> -#define KEY_DIRECTORY 0x18a
> -#define KEY_LIST 0x18b
> -#define KEY_MEMO 0x18c /* Media Select Messages */
> -#define KEY_CALENDAR 0x18d
> -#define KEY_RED 0x18e
> -#define KEY_GREEN 0x18f
> -#define KEY_YELLOW 0x190
> -#define KEY_BLUE 0x191
> -#define KEY_CHANNELUP 0x192 /* Channel Increment */
> -#define KEY_CHANNELDOWN 0x193 /* Channel Decrement */
> -#define KEY_FIRST 0x194
> -#define KEY_LAST 0x195 /* Recall Last */
> -#define KEY_AB 0x196
> -#define KEY_NEXT 0x197
> -#define KEY_RESTART 0x198
> -#define KEY_SLOW 0x199
> -#define KEY_SHUFFLE 0x19a
> -#define KEY_BREAK 0x19b
> -#define KEY_PREVIOUS 0x19c
> -#define KEY_DIGITS 0x19d
> -#define KEY_TEEN 0x19e
> -#define KEY_TWEN 0x19f
> -#define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */
> -#define KEY_GAMES 0x1a1 /* Media Select Games */
> -#define KEY_ZOOMIN 0x1a2 /* AC Zoom In */
> -#define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */
> -#define KEY_ZOOMRESET 0x1a4 /* AC Zoom */
> -#define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */
> -#define KEY_EDITOR 0x1a6 /* AL Text Editor */
> -#define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */
> -#define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */
> -#define KEY_PRESENTATION 0x1a9 /* AL Presentation App */
> -#define KEY_DATABASE 0x1aa /* AL Database App */
> -#define KEY_NEWS 0x1ab /* AL Newsreader */
> -#define KEY_VOICEMAIL 0x1ac /* AL Voicemail */
> -#define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */
> -#define KEY_MESSENGER 0x1ae /* AL Instant Messaging */
> -#define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */
> -#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */
> -#define KEY_LOGOFF 0x1b1 /* AL Logoff */
> -
> -#define KEY_DOLLAR 0x1b2
> -#define KEY_EURO 0x1b3
> -
> -#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */
> -#define KEY_FRAMEFORWARD 0x1b5
> -#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */
> -#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */
> -#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */
> -#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */
> -#define KEY_IMAGES 0x1ba /* AL Image Browser */
> -
> -#define KEY_DEL_EOL 0x1c0
> -#define KEY_DEL_EOS 0x1c1
> -#define KEY_INS_LINE 0x1c2
> -#define KEY_DEL_LINE 0x1c3
> -
> -#define KEY_FN 0x1d0
> -#define KEY_FN_ESC 0x1d1
> -#define KEY_FN_F1 0x1d2
> -#define KEY_FN_F2 0x1d3
> -#define KEY_FN_F3 0x1d4
> -#define KEY_FN_F4 0x1d5
> -#define KEY_FN_F5 0x1d6
> -#define KEY_FN_F6 0x1d7
> -#define KEY_FN_F7 0x1d8
> -#define KEY_FN_F8 0x1d9
> -#define KEY_FN_F9 0x1da
> -#define KEY_FN_F10 0x1db
> -#define KEY_FN_F11 0x1dc
> -#define KEY_FN_F12 0x1dd
> -#define KEY_FN_1 0x1de
> -#define KEY_FN_2 0x1df
> -#define KEY_FN_D 0x1e0
> -#define KEY_FN_E 0x1e1
> -#define KEY_FN_F 0x1e2
> -#define KEY_FN_S 0x1e3
> -#define KEY_FN_B 0x1e4
> -
> -#define KEY_BRL_DOT1 0x1f1
> -#define KEY_BRL_DOT2 0x1f2
> -#define KEY_BRL_DOT3 0x1f3
> -#define KEY_BRL_DOT4 0x1f4
> -#define KEY_BRL_DOT5 0x1f5
> -#define KEY_BRL_DOT6 0x1f6
> -#define KEY_BRL_DOT7 0x1f7
> -#define KEY_BRL_DOT8 0x1f8
> -#define KEY_BRL_DOT9 0x1f9
> -#define KEY_BRL_DOT10 0x1fa
> -
> -#define KEY_NUMERIC_0 0x200 /* used by phones, remote controls, */
> -#define KEY_NUMERIC_1 0x201 /* and other keypads */
> -#define KEY_NUMERIC_2 0x202
> -#define KEY_NUMERIC_3 0x203
> -#define KEY_NUMERIC_4 0x204
> -#define KEY_NUMERIC_5 0x205
> -#define KEY_NUMERIC_6 0x206
> -#define KEY_NUMERIC_7 0x207
> -#define KEY_NUMERIC_8 0x208
> -#define KEY_NUMERIC_9 0x209
> -#define KEY_NUMERIC_STAR 0x20a
> -#define KEY_NUMERIC_POUND 0x20b
> -
> -#define KEY_CAMERA_FOCUS 0x210
> -#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */
> -
> -#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */
> -#define KEY_TOUCHPAD_ON 0x213
> -#define KEY_TOUCHPAD_OFF 0x214
> -
> -#define KEY_CAMERA_ZOOMIN 0x215
> -#define KEY_CAMERA_ZOOMOUT 0x216
> -#define KEY_CAMERA_UP 0x217
> -#define KEY_CAMERA_DOWN 0x218
> -#define KEY_CAMERA_LEFT 0x219
> -#define KEY_CAMERA_RIGHT 0x21a
> -
> -#define KEY_ATTENDANT_ON 0x21b
> -#define KEY_ATTENDANT_OFF 0x21c
> -#define KEY_ATTENDANT_TOGGLE 0x21d /* Attendant call on or off */
> -#define KEY_LIGHTS_TOGGLE 0x21e /* Reading light on or off */
> -
> -#define BTN_DPAD_UP 0x220
> -#define BTN_DPAD_DOWN 0x221
> -#define BTN_DPAD_LEFT 0x222
> -#define BTN_DPAD_RIGHT 0x223
> -
> -#define MATRIX_KEY(row, col, code) \
> - ((((row) & 0xFF) << 24) | (((col) & 0xFF) << 16) | ((code) & 0xFFFF))
> -
> -#endif /* _DT_BINDINGS_INPUT_INPUT_H */
> diff --git a/include/dt-bindings/interrupt-controller/arm-gic.h b/include/dt-bindings/interrupt-controller/arm-gic.h
> deleted file mode 100644
> index 1ea1b70..0000000
> --- a/include/dt-bindings/interrupt-controller/arm-gic.h
> +++ /dev/null
> @@ -1,22 +0,0 @@
> -/*
> - * This header provides constants for the ARM GIC.
> - */
> -
> -#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_ARM_GIC_H
> -#define _DT_BINDINGS_INTERRUPT_CONTROLLER_ARM_GIC_H
> -
> -#include <dt-bindings/interrupt-controller/irq.h>
> -
> -/* interrupt specific cell 0 */
> -
> -#define GIC_SPI 0
> -#define GIC_PPI 1
> -
> -/*
> - * Interrupt specifier cell 2.
> - * The flaggs in irq.h are valid, plus those below.
> - */
> -#define GIC_CPU_MASK_RAW(x) ((x) << 8)
> -#define GIC_CPU_MASK_SIMPLE(num) GIC_CPU_MASK_RAW((1 << (num)) - 1)
> -
> -#endif
> diff --git a/include/dt-bindings/interrupt-controller/irq.h b/include/dt-bindings/interrupt-controller/irq.h
> deleted file mode 100644
> index 33a1003..0000000
> --- a/include/dt-bindings/interrupt-controller/irq.h
> +++ /dev/null
> @@ -1,19 +0,0 @@
> -/*
> - * This header provides constants for most IRQ bindings.
> - *
> - * Most IRQ bindings include a flags cell as part of the IRQ specifier.
> - * In most cases, the format of the flags cell uses the standard values
> - * defined in this header.
> - */
> -
> -#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_IRQ_H
> -#define _DT_BINDINGS_INTERRUPT_CONTROLLER_IRQ_H
> -
> -#define IRQ_TYPE_NONE 0
> -#define IRQ_TYPE_EDGE_RISING 1
> -#define IRQ_TYPE_EDGE_FALLING 2
> -#define IRQ_TYPE_EDGE_BOTH (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)
> -#define IRQ_TYPE_LEVEL_HIGH 4
> -#define IRQ_TYPE_LEVEL_LOW 8
> -
> -#endif
> diff --git a/include/dt-bindings/pinctrl/am33xx.h b/include/dt-bindings/pinctrl/am33xx.h
> deleted file mode 100644
> index 2fbc804..0000000
> --- a/include/dt-bindings/pinctrl/am33xx.h
> +++ /dev/null
> @@ -1,42 +0,0 @@
> -/*
> - * This header provides constants specific to AM33XX pinctrl bindings.
> - */
> -
> -#ifndef _DT_BINDINGS_PINCTRL_AM33XX_H
> -#define _DT_BINDINGS_PINCTRL_AM33XX_H
> -
> -#include <dt-bindings/pinctrl/omap.h>
> -
> -/* am33xx specific mux bit defines */
> -#undef PULL_ENA
> -#undef INPUT_EN
> -
> -#define PULL_DISABLE (1 << 3)
> -#define INPUT_EN (1 << 5)
> -#define SLEWCTRL_FAST (1 << 6)
> -
> -/* update macro depending on INPUT_EN and PULL_ENA */
> -#undef PIN_OUTPUT
> -#undef PIN_OUTPUT_PULLUP
> -#undef PIN_OUTPUT_PULLDOWN
> -#undef PIN_INPUT
> -#undef PIN_INPUT_PULLUP
> -#undef PIN_INPUT_PULLDOWN
> -
> -#define PIN_OUTPUT (PULL_DISABLE)
> -#define PIN_OUTPUT_PULLUP (PULL_UP)
> -#define PIN_OUTPUT_PULLDOWN 0
> -#define PIN_INPUT (INPUT_EN | PULL_DISABLE)
> -#define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP)
> -#define PIN_INPUT_PULLDOWN (INPUT_EN)
> -
> -/* undef non-existing modes */
> -#undef PIN_OFF_NONE
> -#undef PIN_OFF_OUTPUT_HIGH
> -#undef PIN_OFF_OUTPUT_LOW
> -#undef PIN_OFF_INPUT_PULLUP
> -#undef PIN_OFF_INPUT_PULLDOWN
> -#undef PIN_OFF_WAKEUPENABLE
> -
> -#endif
> -
> diff --git a/include/dt-bindings/pinctrl/omap.h b/include/dt-bindings/pinctrl/omap.h
> deleted file mode 100644
> index bed35e3..0000000
> --- a/include/dt-bindings/pinctrl/omap.h
> +++ /dev/null
> @@ -1,53 +0,0 @@
> -/*
> - * This header provides constants for OMAP pinctrl bindings.
> - *
> - * Copyright (C) 2009 Nokia
> - * Copyright (C) 2009-2010 Texas Instruments
> - */
> -
> -#ifndef _DT_BINDINGS_PINCTRL_OMAP_H
> -#define _DT_BINDINGS_PINCTRL_OMAP_H
> -
> -/* 34xx mux mode options for each pin. See TRM for options */
> -#define MUX_MODE0 0
> -#define MUX_MODE1 1
> -#define MUX_MODE2 2
> -#define MUX_MODE3 3
> -#define MUX_MODE4 4
> -#define MUX_MODE5 5
> -#define MUX_MODE6 6
> -#define MUX_MODE7 7
> -
> -/* 24xx/34xx mux bit defines */
> -#define PULL_ENA (1 << 3)
> -#define PULL_UP (1 << 4)
> -#define ALTELECTRICALSEL (1 << 5)
> -
> -/* omap3/4/5 specific mux bit defines */
> -#define INPUT_EN (1 << 8)
> -#define OFF_EN (1 << 9)
> -#define OFFOUT_EN (1 << 10)
> -#define OFFOUT_VAL (1 << 11)
> -#define OFF_PULL_EN (1 << 12)
> -#define OFF_PULL_UP (1 << 13)
> -#define WAKEUP_EN (1 << 14)
> -#define WAKEUP_EVENT (1 << 15)
> -
> -/* Active pin states */
> -#define PIN_OUTPUT 0
> -#define PIN_OUTPUT_PULLUP (PIN_OUTPUT | PULL_ENA | PULL_UP)
> -#define PIN_OUTPUT_PULLDOWN (PIN_OUTPUT | PULL_ENA)
> -#define PIN_INPUT INPUT_EN
> -#define PIN_INPUT_PULLUP (PULL_ENA | INPUT_EN | PULL_UP)
> -#define PIN_INPUT_PULLDOWN (PULL_ENA | INPUT_EN)
> -
> -/* Off mode states */
> -#define PIN_OFF_NONE 0
> -#define PIN_OFF_OUTPUT_HIGH (OFF_EN | OFFOUT_EN | OFFOUT_VAL)
> -#define PIN_OFF_OUTPUT_LOW (OFF_EN | OFFOUT_EN)
> -#define PIN_OFF_INPUT_PULLUP (OFF_EN | OFF_PULL_EN | OFF_PULL_UP)
> -#define PIN_OFF_INPUT_PULLDOWN (OFF_EN | OFF_PULL_EN)
> -#define PIN_OFF_WAKEUPENABLE WAKEUP_EN
> -
> -#endif
> -
> diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
> index cf7e2d5..8170b38 100644
> --- a/scripts/Makefile.lib
> +++ b/scripts/Makefile.lib
> @@ -146,8 +146,8 @@ cpp_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(__cpp_flags)
> ld_flags = $(LDFLAGS) $(EXTRA_LDFLAGS)
>
> dtc_cpp_flags = -Wp,-MD,$(depfile).pre -nostdinc \
> - -I$(srctree)/arch/$(SRCARCH)/dts \
> - -I$(srctree)/arch/$(SRCARCH)/dts/include \
> + -I$(srctree)/dts/include \
> + -I$(srctree)/dts/src/ \
> -undef -D__DTS__
>
> # Finds the multi-part object the current object will be linked into
> @@ -222,6 +222,7 @@ quiet_cmd_dtc = DTC $@
> cmd_dtc = $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
> $(objtree)/scripts/dtc/dtc -O dtb -o $@ -b 0 \
> -i $(srctree)/arch/$(SRCARCH)/dts $(DTC_FLAGS) \
> + -i $(srctree)/dts/src/$(SRCARCH) \
> -d $(depfile).dtc $(dtc-tmp) ; \
> cat $(depfile).pre $(depfile).dtc > $(depfile)
>
> --
> 1.9.1
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
--
--
Best regards,
Antony Pavlov
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 03/12] dts: Use dt-bindings from kernel
2014-04-28 14:22 ` Antony Pavlov
@ 2014-04-28 18:33 ` Sascha Hauer
0 siblings, 0 replies; 23+ messages in thread
From: Sascha Hauer @ 2014-04-28 18:33 UTC (permalink / raw)
To: Antony Pavlov; +Cc: barebox
On Mon, Apr 28, 2014 at 06:22:00PM +0400, Antony Pavlov wrote:
> On Mon, 28 Apr 2014 09:45:52 +0200
> > --- a/include/dt-bindings/clock/ar933x-clk.h
> > +++ /dev/null
>
> There is no device tree support for ar933x in mainline linux!
> Please get this file back.
Yeah, I already noticed that during compile tests. Don't worry, I'll
keep the file.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH] make: dts: fix out-of-tree build
2014-04-28 7:45 ` [PATCH 03/12] dts: Use dt-bindings from kernel Sascha Hauer
2014-04-28 14:22 ` Antony Pavlov
@ 2014-04-30 5:49 ` Silvio Fricke
2014-05-05 7:38 ` Sascha Hauer
1 sibling, 1 reply; 23+ messages in thread
From: Silvio Fricke @ 2014-04-30 5:49 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox, Silvio Fricke
If barebox is builded out-of-tree we don't find the dts-include
This patch prevent us to get this:
/[...]/barebox/drivers/input/keymap.c:4:37: fatal error: dt-bindings/input/input.h: No such file or directory
Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com>
---
Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Makefile b/Makefile
index a54b82b..c654f4f 100644
--- a/Makefile
+++ b/Makefile
@@ -290,7 +290,7 @@ export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_ve
# Use LINUXINCLUDE when you must reference the include/ directory.
# Needed to be compatible with the O= option
-LINUXINCLUDE := -Iinclude -Idts/include \
+LINUXINCLUDE := -Iinclude -I$(srctree)/dts/include \
$(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) \
-I$(srctree)/arch/$(ARCH)/include \
-I$(objtree)/arch/$(ARCH)/include \
--
1.9.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH] make: dts: fix out-of-tree build
2014-04-30 5:49 ` [PATCH] make: dts: fix out-of-tree build Silvio Fricke
@ 2014-05-05 7:38 ` Sascha Hauer
0 siblings, 0 replies; 23+ messages in thread
From: Sascha Hauer @ 2014-05-05 7:38 UTC (permalink / raw)
To: Silvio Fricke; +Cc: barebox
Hi Silvio,
On Wed, Apr 30, 2014 at 07:49:34AM +0200, Silvio Fricke wrote:
> If barebox is builded out-of-tree we don't find the dts-include
>
> This patch prevent us to get this:
> /[...]/barebox/drivers/input/keymap.c:4:37: fatal error: dt-bindings/input/input.h: No such file or directory
>
> Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com>
I already realized and fixed this when someone else mentioned
out-of-tree building doesn't work. It seems I really have to do this
more frequently.
Sascha
> ---
> Makefile | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/Makefile b/Makefile
> index a54b82b..c654f4f 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -290,7 +290,7 @@ export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_ve
>
> # Use LINUXINCLUDE when you must reference the include/ directory.
> # Needed to be compatible with the O= option
> -LINUXINCLUDE := -Iinclude -Idts/include \
> +LINUXINCLUDE := -Iinclude -I$(srctree)/dts/include \
> $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) \
> -I$(srctree)/arch/$(ARCH)/include \
> -I$(objtree)/arch/$(ARCH)/include \
> --
> 1.9.2
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 04/12] dts: i.MX51 efika sb: Roll back pingroup changes
2014-04-28 7:45 [PATCH] Add Linux dts files and use them Sascha Hauer
2014-04-28 7:45 ` [PATCH 02/12] serial: ns16550: omap: set register shift from code Sascha Hauer
2014-04-28 7:45 ` [PATCH 03/12] dts: Use dt-bindings from kernel Sascha Hauer
@ 2014-04-28 7:45 ` Sascha Hauer
2014-04-28 7:45 ` [PATCH 05/12] ARM: dts: i.MX51: Use upstream dts files Sascha Hauer
` (8 subsequent siblings)
11 siblings, 0 replies; 23+ messages in thread
From: Sascha Hauer @ 2014-04-28 7:45 UTC (permalink / raw)
To: barebox
The pingrp defines never made it upstream, so roll back the changes
and use the individual pin defines for the Efika sb instead.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/dts/imx51-genesi-efika-sb.dts | 129 ++++++++++++++++++++++++++++++---
1 file changed, 118 insertions(+), 11 deletions(-)
diff --git a/arch/arm/dts/imx51-genesi-efika-sb.dts b/arch/arm/dts/imx51-genesi-efika-sb.dts
index 2b85a49..f30fc9a 100644
--- a/arch/arm/dts/imx51-genesi-efika-sb.dts
+++ b/arch/arm/dts/imx51-genesi-efika-sb.dts
@@ -11,6 +11,8 @@
/dts-v1/;
#include "imx51.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "Genesi Efika MX Smartbook";
@@ -126,7 +128,12 @@
};
pinctrl_audmux: audmuxgrp {
- fsl,pins = <MX51_AUDMUX_PINGRP1>;
+ fsl,pins = <
+ MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000
+ MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x80000000
+ MX51_PAD_AUD3_BB_CK__AUD3_TXC 0x80000000
+ MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x80000000
+ >;
};
pinctrl_battery: batterygrp {
@@ -137,7 +144,9 @@
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
- MX51_ECSPI1_PINGRP1
+ MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185
+ MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185
+ MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 /* CS0 */
MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 /* CS1 */
MX51_PAD_GPIO1_6__GPIO1_6 0xe5 /* PMIC IRQ */
@@ -146,7 +155,12 @@
pinctrl_esdhc1: esdhc1grp {
fsl,pins = <
- MX51_ESDHC1_PINGRP1
+ MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5
+ MX51_PAD_SD1_CLK__SD1_CLK 0x20d5
+ MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5
+ MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
+ MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
+ MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
MX51_PAD_GPIO1_1__GPIO1_1 0xe5 /* WP */
MX51_PAD_EIM_CS2__GPIO2_27 0xe5 /* CD */
>;
@@ -154,18 +168,53 @@
pinctrl_esdhc2: esdhc2grp {
fsl,pins = <
- MX51_ESDHC2_PINGRP1
+ MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5
+ MX51_PAD_SD2_CLK__SD2_CLK 0x20d5
+ MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5
+ MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5
+ MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5
+ MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5
MX51_PAD_GPIO1_7__GPIO1_7 0xe5 /* WP */
MX51_PAD_GPIO1_8__GPIO1_8 0xe5 /* CD */
>;
};
pinctrl_i2c2: i2c2grp {
- fsl,pins = <MX51_I2C2_PINGRP1>;
+ fsl,pins = <
+ MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed
+ MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed
+ >;
};
pinctrl_ipu_disp1: ipudisp1grp {
- fsl,pins = <MX51_IPU_DISP1_PINGRP1>;
+ fsl,pins = <
+ MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5
+ MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5
+ MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5
+ MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5
+ MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5
+ MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5
+ MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5
+ MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5
+ MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5
+ MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5
+ MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5
+ MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5
+ MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5
+ MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5
+ MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5
+ MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5
+ MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5
+ MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5
+ MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5
+ MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5
+ MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5
+ MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5
+ MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5
+ MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5
+ MX51_PAD_DI1_PIN2__DI1_PIN2 0x5
+ MX51_PAD_DI1_PIN3__DI1_PIN3 0x5
+ >;
};
pinctrl_keys: keysgrp {
@@ -183,22 +232,80 @@
};
pinctrl_pata: patagrp {
- fsl,pins = <MX51_PATA_PINGRP1>;
+ fsl,pins = <
+ MX51_PAD_NANDF_WE_B__PATA_DIOW 0x2004
+ MX51_PAD_NANDF_RE_B__PATA_DIOR 0x2004
+ MX51_PAD_NANDF_ALE__PATA_BUFFER_EN 0x2004
+ MX51_PAD_NANDF_CLE__PATA_RESET_B 0x2004
+ MX51_PAD_NANDF_WP_B__PATA_DMACK 0x2004
+ MX51_PAD_NANDF_RB0__PATA_DMARQ 0x2004
+ MX51_PAD_NANDF_RB1__PATA_IORDY 0x2004
+ MX51_PAD_GPIO_NAND__PATA_INTRQ 0x2004
+ MX51_PAD_NANDF_CS2__PATA_CS_0 0x2004
+ MX51_PAD_NANDF_CS3__PATA_CS_1 0x2004
+ MX51_PAD_NANDF_CS4__PATA_DA_0 0x2004
+ MX51_PAD_NANDF_CS5__PATA_DA_1 0x2004
+ MX51_PAD_NANDF_CS6__PATA_DA_2 0x2004
+ MX51_PAD_NANDF_D15__PATA_DATA15 0x2004
+ MX51_PAD_NANDF_D14__PATA_DATA14 0x2004
+ MX51_PAD_NANDF_D13__PATA_DATA13 0x2004
+ MX51_PAD_NANDF_D12__PATA_DATA12 0x2004
+ MX51_PAD_NANDF_D11__PATA_DATA11 0x2004
+ MX51_PAD_NANDF_D10__PATA_DATA10 0x2004
+ MX51_PAD_NANDF_D9__PATA_DATA9 0x2004
+ MX51_PAD_NANDF_D8__PATA_DATA8 0x2004
+ MX51_PAD_NANDF_D7__PATA_DATA7 0x2004
+ MX51_PAD_NANDF_D6__PATA_DATA6 0x2004
+ MX51_PAD_NANDF_D5__PATA_DATA5 0x2004
+ MX51_PAD_NANDF_D4__PATA_DATA4 0x2004
+ MX51_PAD_NANDF_D3__PATA_DATA3 0x2004
+ MX51_PAD_NANDF_D2__PATA_DATA2 0x2004
+ MX51_PAD_NANDF_D1__PATA_DATA1 0x2004
+ MX51_PAD_NANDF_D0__PATA_DATA0 0x2004
+ >;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
- MX51_UART1_PINGRP1
- MX51_UART1_RTSCTS_PINGRP1
+ MX51_PAD_UART1_RXD__UART1_RXD 0x1c5
+ MX51_PAD_UART1_TXD__UART1_TXD 0x1c5
+ MX51_PAD_UART1_RTS__UART1_RTS 0x1c5
+ MX51_PAD_UART1_CTS__UART1_CTS 0x1c5
>;
};
pinctrl_usbh1: usbh1grp {
- fsl,pins = <MX51_USBH1_PINGRP1>;
+ fsl,pins = <
+ MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5
+ MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5
+ MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5
+ MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5
+ MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5
+ MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5
+ MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5
+ MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5
+ MX51_PAD_USBH1_CLK__USBH1_CLK 0x1e5
+ MX51_PAD_USBH1_DIR__USBH1_DIR 0x1e5
+ MX51_PAD_USBH1_NXT__USBH1_NXT 0x1e5
+ MX51_PAD_USBH1_STP__USBH1_STP 0x1e5
+ >;
};
pinctrl_usbh2: usbh2grp {
- fsl,pins = <MX51_USBH2_PINGRP1>;
+ fsl,pins = <
+ MX51_PAD_EIM_D16__USBH2_DATA0 0x1e5
+ MX51_PAD_EIM_D17__USBH2_DATA1 0x1e5
+ MX51_PAD_EIM_D18__USBH2_DATA2 0x1e5
+ MX51_PAD_EIM_D19__USBH2_DATA3 0x1e5
+ MX51_PAD_EIM_D20__USBH2_DATA4 0x1e5
+ MX51_PAD_EIM_D21__USBH2_DATA5 0x1e5
+ MX51_PAD_EIM_D22__USBH2_DATA6 0x1e5
+ MX51_PAD_EIM_D23__USBH2_DATA7 0x1e5
+ MX51_PAD_EIM_A24__USBH2_CLK 0x1e5
+ MX51_PAD_EIM_A25__USBH2_DIR 0x1e5
+ MX51_PAD_EIM_A27__USBH2_NXT 0x1e5
+ MX51_PAD_EIM_A26__USBH2_STP 0x1e5
+ >;
};
};
};
--
1.9.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 05/12] ARM: dts: i.MX51: Use upstream dts files
2014-04-28 7:45 [PATCH] Add Linux dts files and use them Sascha Hauer
` (2 preceding siblings ...)
2014-04-28 7:45 ` [PATCH 04/12] dts: i.MX51 efika sb: Roll back pingroup changes Sascha Hauer
@ 2014-04-28 7:45 ` Sascha Hauer
2014-04-28 7:45 ` [PATCH 06/12] ARM: i.MX6: Use upstream dtsi files Sascha Hauer
` (7 subsequent siblings)
11 siblings, 0 replies; 23+ messages in thread
From: Sascha Hauer @ 2014-04-28 7:45 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/dts/imx51-babbage.dts | 392 +----------------
arch/arm/dts/imx51-genesi-efika-sb.dts | 2 +-
arch/arm/dts/imx51-pinfunc.h | 773 ---------------------------------
arch/arm/dts/imx51-pingrp.h | 249 -----------
arch/arm/dts/imx51.dtsi | 551 -----------------------
5 files changed, 2 insertions(+), 1965 deletions(-)
delete mode 100644 arch/arm/dts/imx51-pinfunc.h
delete mode 100644 arch/arm/dts/imx51-pingrp.h
delete mode 100644 arch/arm/dts/imx51.dtsi
diff --git a/arch/arm/dts/imx51-babbage.dts b/arch/arm/dts/imx51-babbage.dts
index 41f470e..82b25d3 100644
--- a/arch/arm/dts/imx51-babbage.dts
+++ b/arch/arm/dts/imx51-babbage.dts
@@ -10,13 +10,9 @@
* http://www.gnu.org/copyleft/gpl.html
*/
-/dts-v1/;
-#include "imx51.dtsi"
+#include <arm/imx51-babbage.dts>
/ {
- model = "Freescale i.MX51 Babbage Board";
- compatible = "fsl,imx51-babbage", "fsl,imx51";
-
chosen {
linux,stdout-path = "/soc/aips@70000000/serial@73fbc000";
@@ -25,106 +21,9 @@
device-path = &esdhc1, "partname:barebox-environment";
};
};
-
- memory {
- reg = <0x90000000 0x20000000>;
- };
-
- display@di0 {
- compatible = "fsl,imx-parallel-display";
- crtcs = <&ipu 0>;
- interface-pix-fmt = "rgb24";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ipu_disp1>;
- display-timings {
- native-mode = <&timing0>;
- timing0: dvi {
- clock-frequency = <65000000>;
- hactive = <1024>;
- vactive = <768>;
- hback-porch = <220>;
- hfront-porch = <40>;
- vback-porch = <21>;
- vfront-porch = <7>;
- hsync-len = <60>;
- vsync-len = <10>;
- };
- };
- };
-
- display@di1 {
- compatible = "fsl,imx-parallel-display";
- crtcs = <&ipu 1>;
- interface-pix-fmt = "rgb565";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ipu_disp2>;
- status = "disabled";
- display-timings {
- native-mode = <&timing1>;
- timing1: claawvga {
- clock-frequency = <27000000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <40>;
- hfront-porch = <60>;
- vback-porch = <10>;
- vfront-porch = <10>;
- hsync-len = <20>;
- vsync-len = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- power {
- label = "Power Button";
- gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
- linux,code = <116>; /* KEY_POWER */
- gpio-key,wakeup;
- };
- };
-
- sound {
- compatible = "fsl,imx51-babbage-sgtl5000",
- "fsl,imx-audio-sgtl5000";
- model = "imx51-babbage-sgtl5000";
- ssi-controller = <&ssi2>;
- audio-codec = <&sgtl5000>;
- audio-routing =
- "MIC_IN", "Mic Jack",
- "Mic Jack", "Mic Bias",
- "Headphone Jack", "HP_OUT";
- mux-int-port = <2>;
- mux-ext-port = <3>;
- };
-
- clocks {
- ckih1 {
- clock-frequency = <22579200>;
- };
-
- clk_26M: codec_clock {
- compatible = "fixed-clock";
- reg=<0>;
- #clock-cells = <0>;
- clock-frequency = <26000000>;
- gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
- };
- };
};
&esdhc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1>;
- fsl,cd-controller;
- fsl,wp-controller;
- status = "okay";
#address-cells = <1>;
#size-cells = <1>;
@@ -134,295 +33,6 @@
};
};
-&esdhc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc2>;
- cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
- wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
-
-&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
- fsl,uart-has-rtscts;
- status = "okay";
-};
-
-&ecspi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1>;
- fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
- <&gpio4 25 GPIO_ACTIVE_LOW>;
- status = "okay";
-
- pmic: mc13892@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mc13892";
- spi-max-frequency = <6000000>;
- spi-cs-high;
- reg = <0>;
- interrupt-parent = <&gpio1>;
- interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-
- regulators {
- sw1_reg: sw1 {
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1375000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw2_reg: sw2 {
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1850000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw3_reg: sw3 {
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1850000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw4_reg: sw4 {
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1850000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- vpll_reg: vpll {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- vdig_reg: vdig {
- regulator-min-microvolt = <1650000>;
- regulator-max-microvolt = <1650000>;
- regulator-boot-on;
- };
-
- vsd_reg: vsd {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3150000>;
- };
-
- vusb2_reg: vusb2 {
- regulator-min-microvolt = <2400000>;
- regulator-max-microvolt = <2775000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- vvideo_reg: vvideo {
- regulator-min-microvolt = <2775000>;
- regulator-max-microvolt = <2775000>;
- };
-
- vaudio_reg: vaudio {
- regulator-min-microvolt = <2300000>;
- regulator-max-microvolt = <3000000>;
- };
-
- vcam_reg: vcam {
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <3000000>;
- };
-
- vgen1_reg: vgen1 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- vgen2_reg: vgen2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3150000>;
- regulator-always-on;
- };
-
- vgen3_reg: vgen3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2900000>;
- regulator-always-on;
- };
- };
- };
-
- flash: at45db321d@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
- spi-max-frequency = <25000000>;
- reg = <1>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "Kernel";
- reg = <0x40000 0x3c0000>;
- };
- };
-};
-
-&ssi2 {
- fsl,mode = "i2s-slave";
- status = "okay";
-};
-
&iim {
barebox,provide-mac-address = <&fec 1 9>;
};
-
-&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- imx51-babbage {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- MX51_PAD_GPIO1_0__SD1_CD 0x20d5
- MX51_PAD_GPIO1_1__SD1_WP 0x20d5
- MX51_PAD_GPIO1_5__GPIO1_5 0x100
- MX51_PAD_GPIO1_6__GPIO1_6 0x100
- MX51_PAD_EIM_A27__GPIO2_21 0x5
- MX51_PAD_CSPI1_SS0__GPIO4_24 0x85
- MX51_PAD_CSPI1_SS1__GPIO4_25 0x85
- MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000
- >;
- };
-
- pinctrl_audmux: audmuxgrp {
- fsl,pins = <MX51_AUDMUX_PINGRP1>;
- };
-
- pinctrl_ecspi1: ecspi1grp {
- fsl,pins = <MX51_ECSPI1_PINGRP1>;
- };
-
- pinctrl_esdhc1: esdhc1grp {
- fsl,pins = <MX51_ESDHC1_PINGRP1>;
- };
-
- pinctrl_esdhc2: esdhc2grp {
- fsl,pins = <MX51_ESDHC2_PINGRP1>;
- };
-
- pinctrl_fec: fecgrp {
- fsl,pins = <
- MX51_FEC_PINGRP1
- MX51_PAD_EIM_A20__GPIO2_14 0x85 /* Reset */
- >;
- };
-
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <MX51_I2C2_PINGRP1>;
- };
-
- pinctrl_ipu_disp1: ipudisp1grp {
- fsl,pins = <MX51_IPU_DISP1_PINGRP1>;
- };
-
- pinctrl_ipu_disp2: ipudisp2grp {
- fsl,pins = <MX51_IPU_DISP2_PINGRP1>;
- };
-
- pinctrl_kpp: kppgrp {
- fsl,pins = <MX51_KPP_PINGRP1>;
- };
-
- pinctrl_uart1: uart1grp {
- fsl,pins = <MX51_UART1_PINGRP1>;
- };
-
- pinctrl_uart1_rtscts: uart1rtsctsgrp {
- fsl,pins = <MX51_UART1_RTSCTS_PINGRP1>;
- };
-
- pinctrl_uart2: uart2grp {
- fsl,pins = <MX51_UART2_PINGRP1>;
- };
-
- pinctrl_uart3: uart3grp {
- fsl,pins = <MX51_UART3_PINGRP1>;
- };
-
- pinctrl_uart3_rtscts: uart3rtsctsgrp {
- fsl,pins = <MX51_UART3_RTSCTS_PINGRP1>;
- };
- };
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_rtscts>;
- fsl,uart-has-rtscts;
- status = "okay";
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- status = "okay";
-};
-
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- status = "okay";
-
- sgtl5000: codec@0a {
- compatible = "fsl,sgtl5000";
- reg = <0x0a>;
- clocks = <&clk_26M>;
- VDDA-supply = <&vdig_reg>;
- VDDIO-supply = <&vvideo_reg>;
- };
-};
-
-&audmux {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux>;
- status = "okay";
-};
-
-&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec>;
- phy-mode = "mii";
- phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
- phy-reset-duration = <1>;
- status = "okay";
-};
-
-&kpp {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_kpp>;
- linux,keymap = <0x00000067 /* KEY_UP */
- 0x0001006c /* KEY_DOWN */
- 0x00020072 /* KEY_VOLUMEDOWN */
- 0x00030066 /* KEY_HOME */
- 0x0100006a /* KEY_RIGHT */
- 0x01010069 /* KEY_LEFT */
- 0x0102001c /* KEY_ENTER */
- 0x01030073 /* KEY_VOLUMEUP */
- 0x02000040 /* KEY_F6 */
- 0x02010042 /* KEY_F8 */
- 0x02020043 /* KEY_F9 */
- 0x02030044 /* KEY_F10 */
- 0x0300003b /* KEY_F1 */
- 0x0301003c /* KEY_F2 */
- 0x0302003d /* KEY_F3 */
- 0x03030074>; /* KEY_POWER */
- status = "okay";
-};
diff --git a/arch/arm/dts/imx51-genesi-efika-sb.dts b/arch/arm/dts/imx51-genesi-efika-sb.dts
index f30fc9a..0d8a883 100644
--- a/arch/arm/dts/imx51-genesi-efika-sb.dts
+++ b/arch/arm/dts/imx51-genesi-efika-sb.dts
@@ -10,7 +10,7 @@
*/
/dts-v1/;
-#include "imx51.dtsi"
+#include <arm/imx51.dtsi>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/arch/arm/dts/imx51-pinfunc.h b/arch/arm/dts/imx51-pinfunc.h
deleted file mode 100644
index 9eb92ab..0000000
--- a/arch/arm/dts/imx51-pinfunc.h
+++ /dev/null
@@ -1,773 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __DTS_IMX51_PINFUNC_H
-#define __DTS_IMX51_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-#define MX51_PAD_EIM_D16__AUD4_RXFS 0x05c 0x3f0 0x000 0x5 0x0
-#define MX51_PAD_EIM_D16__AUD5_TXD 0x05c 0x3f0 0x8d8 0x7 0x0
-#define MX51_PAD_EIM_D16__EIM_D16 0x05c 0x3f0 0x000 0x0 0x0
-#define MX51_PAD_EIM_D16__GPIO2_0 0x05c 0x3f0 0x000 0x1 0x0
-#define MX51_PAD_EIM_D16__I2C1_SDA 0x05c 0x3f0 0x9b4 0x4 0x0
-#define MX51_PAD_EIM_D16__UART2_CTS 0x05c 0x3f0 0x000 0x3 0x0
-#define MX51_PAD_EIM_D16__USBH2_DATA0 0x05c 0x3f0 0x000 0x2 0x0
-#define MX51_PAD_EIM_D17__AUD5_RXD 0x060 0x3f4 0x8d4 0x7 0x0
-#define MX51_PAD_EIM_D17__EIM_D17 0x060 0x3f4 0x000 0x0 0x0
-#define MX51_PAD_EIM_D17__GPIO2_1 0x060 0x3f4 0x000 0x1 0x0
-#define MX51_PAD_EIM_D17__UART2_RXD 0x060 0x3f4 0x9ec 0x3 0x0
-#define MX51_PAD_EIM_D17__UART3_CTS 0x060 0x3f4 0x000 0x4 0x0
-#define MX51_PAD_EIM_D17__USBH2_DATA1 0x060 0x3f4 0x000 0x2 0x0
-#define MX51_PAD_EIM_D18__AUD5_TXC 0x064 0x3f8 0x8e4 0x7 0x0
-#define MX51_PAD_EIM_D18__EIM_D18 0x064 0x3f8 0x000 0x0 0x0
-#define MX51_PAD_EIM_D18__GPIO2_2 0x064 0x3f8 0x000 0x1 0x0
-#define MX51_PAD_EIM_D18__UART2_TXD 0x064 0x3f8 0x000 0x3 0x0
-#define MX51_PAD_EIM_D18__UART3_RTS 0x064 0x3f8 0x9f0 0x4 0x1
-#define MX51_PAD_EIM_D18__USBH2_DATA2 0x064 0x3f8 0x000 0x2 0x0
-#define MX51_PAD_EIM_D19__AUD4_RXC 0x068 0x3fc 0x000 0x5 0x0
-#define MX51_PAD_EIM_D19__AUD5_TXFS 0x068 0x3fc 0x8e8 0x7 0x0
-#define MX51_PAD_EIM_D19__EIM_D19 0x068 0x3fc 0x000 0x0 0x0
-#define MX51_PAD_EIM_D19__GPIO2_3 0x068 0x3fc 0x000 0x1 0x0
-#define MX51_PAD_EIM_D19__I2C1_SCL 0x068 0x3fc 0x9b0 0x4 0x0
-#define MX51_PAD_EIM_D19__UART2_RTS 0x068 0x3fc 0x9e8 0x3 0x1
-#define MX51_PAD_EIM_D19__USBH2_DATA3 0x068 0x3fc 0x000 0x2 0x0
-#define MX51_PAD_EIM_D20__AUD4_TXD 0x06c 0x400 0x8c8 0x5 0x0
-#define MX51_PAD_EIM_D20__EIM_D20 0x06c 0x400 0x000 0x0 0x0
-#define MX51_PAD_EIM_D20__GPIO2_4 0x06c 0x400 0x000 0x1 0x0
-#define MX51_PAD_EIM_D20__SRTC_ALARM_DEB 0x06c 0x400 0x000 0x4 0x0
-#define MX51_PAD_EIM_D20__USBH2_DATA4 0x06c 0x400 0x000 0x2 0x0
-#define MX51_PAD_EIM_D21__AUD4_RXD 0x070 0x404 0x8c4 0x5 0x0
-#define MX51_PAD_EIM_D21__EIM_D21 0x070 0x404 0x000 0x0 0x0
-#define MX51_PAD_EIM_D21__GPIO2_5 0x070 0x404 0x000 0x1 0x0
-#define MX51_PAD_EIM_D21__SRTC_ALARM_DEB 0x070 0x404 0x000 0x3 0x0
-#define MX51_PAD_EIM_D21__USBH2_DATA5 0x070 0x404 0x000 0x2 0x0
-#define MX51_PAD_EIM_D22__AUD4_TXC 0x074 0x408 0x8cc 0x5 0x0
-#define MX51_PAD_EIM_D22__EIM_D22 0x074 0x408 0x000 0x0 0x0
-#define MX51_PAD_EIM_D22__GPIO2_6 0x074 0x408 0x000 0x1 0x0
-#define MX51_PAD_EIM_D22__USBH2_DATA6 0x074 0x408 0x000 0x2 0x0
-#define MX51_PAD_EIM_D23__AUD4_TXFS 0x078 0x40c 0x8d0 0x5 0x0
-#define MX51_PAD_EIM_D23__EIM_D23 0x078 0x40c 0x000 0x0 0x0
-#define MX51_PAD_EIM_D23__GPIO2_7 0x078 0x40c 0x000 0x1 0x0
-#define MX51_PAD_EIM_D23__SPDIF_OUT1 0x078 0x40c 0x000 0x4 0x0
-#define MX51_PAD_EIM_D23__USBH2_DATA7 0x078 0x40c 0x000 0x2 0x0
-#define MX51_PAD_EIM_D24__AUD6_RXFS 0x07c 0x410 0x8f8 0x5 0x0
-#define MX51_PAD_EIM_D24__EIM_D24 0x07c 0x410 0x000 0x0 0x0
-#define MX51_PAD_EIM_D24__GPIO2_8 0x07c 0x410 0x000 0x1 0x0
-#define MX51_PAD_EIM_D24__I2C2_SDA 0x07c 0x410 0x9bc 0x4 0x0
-#define MX51_PAD_EIM_D24__UART3_CTS 0x07c 0x410 0x000 0x3 0x0
-#define MX51_PAD_EIM_D24__USBOTG_DATA0 0x07c 0x410 0x000 0x2 0x0
-#define MX51_PAD_EIM_D25__EIM_D25 0x080 0x414 0x000 0x0 0x0
-#define MX51_PAD_EIM_D25__KEY_COL6 0x080 0x414 0x9c8 0x1 0x0
-#define MX51_PAD_EIM_D25__UART2_CTS 0x080 0x414 0x000 0x4 0x0
-#define MX51_PAD_EIM_D25__UART3_RXD 0x080 0x414 0x9f4 0x3 0x0
-#define MX51_PAD_EIM_D25__USBOTG_DATA1 0x080 0x414 0x000 0x2 0x0
-#define MX51_PAD_EIM_D26__EIM_D26 0x084 0x418 0x000 0x0 0x0
-#define MX51_PAD_EIM_D26__KEY_COL7 0x084 0x418 0x9cc 0x1 0x0
-#define MX51_PAD_EIM_D26__UART2_RTS 0x084 0x418 0x9e8 0x4 0x3
-#define MX51_PAD_EIM_D26__UART3_TXD 0x084 0x418 0x000 0x3 0x0
-#define MX51_PAD_EIM_D26__USBOTG_DATA2 0x084 0x418 0x000 0x2 0x0
-#define MX51_PAD_EIM_D27__AUD6_RXC 0x088 0x41c 0x8f4 0x5 0x0
-#define MX51_PAD_EIM_D27__EIM_D27 0x088 0x41c 0x000 0x0 0x0
-#define MX51_PAD_EIM_D27__GPIO2_9 0x088 0x41c 0x000 0x1 0x0
-#define MX51_PAD_EIM_D27__I2C2_SCL 0x088 0x41c 0x9b8 0x4 0x0
-#define MX51_PAD_EIM_D27__UART3_RTS 0x088 0x41c 0x9f0 0x3 0x3
-#define MX51_PAD_EIM_D27__USBOTG_DATA3 0x088 0x41c 0x000 0x2 0x0
-#define MX51_PAD_EIM_D28__AUD6_TXD 0x08c 0x420 0x8f0 0x5 0x0
-#define MX51_PAD_EIM_D28__EIM_D28 0x08c 0x420 0x000 0x0 0x0
-#define MX51_PAD_EIM_D28__KEY_ROW4 0x08c 0x420 0x9d0 0x1 0x0
-#define MX51_PAD_EIM_D28__USBOTG_DATA4 0x08c 0x420 0x000 0x2 0x0
-#define MX51_PAD_EIM_D29__AUD6_RXD 0x090 0x424 0x8ec 0x5 0x0
-#define MX51_PAD_EIM_D29__EIM_D29 0x090 0x424 0x000 0x0 0x0
-#define MX51_PAD_EIM_D29__KEY_ROW5 0x090 0x424 0x9d4 0x1 0x0
-#define MX51_PAD_EIM_D29__USBOTG_DATA5 0x090 0x424 0x000 0x2 0x0
-#define MX51_PAD_EIM_D30__AUD6_TXC 0x094 0x428 0x8fc 0x5 0x0
-#define MX51_PAD_EIM_D30__EIM_D30 0x094 0x428 0x000 0x0 0x0
-#define MX51_PAD_EIM_D30__KEY_ROW6 0x094 0x428 0x9d8 0x1 0x0
-#define MX51_PAD_EIM_D30__USBOTG_DATA6 0x094 0x428 0x000 0x2 0x0
-#define MX51_PAD_EIM_D31__AUD6_TXFS 0x098 0x42c 0x900 0x5 0x0
-#define MX51_PAD_EIM_D31__EIM_D31 0x098 0x42c 0x000 0x0 0x0
-#define MX51_PAD_EIM_D31__KEY_ROW7 0x098 0x42c 0x9dc 0x1 0x0
-#define MX51_PAD_EIM_D31__USBOTG_DATA7 0x098 0x42c 0x000 0x2 0x0
-#define MX51_PAD_EIM_A16__EIM_A16 0x09c 0x430 0x000 0x0 0x0
-#define MX51_PAD_EIM_A16__GPIO2_10 0x09c 0x430 0x000 0x1 0x0
-#define MX51_PAD_EIM_A16__OSC_FREQ_SEL0 0x09c 0x430 0x000 0x7 0x0
-#define MX51_PAD_EIM_A17__EIM_A17 0x0a0 0x434 0x000 0x0 0x0
-#define MX51_PAD_EIM_A17__GPIO2_11 0x0a0 0x434 0x000 0x1 0x0
-#define MX51_PAD_EIM_A17__OSC_FREQ_SEL1 0x0a0 0x434 0x000 0x7 0x0
-#define MX51_PAD_EIM_A18__BOOT_LPB0 0x0a4 0x438 0x000 0x7 0x0
-#define MX51_PAD_EIM_A18__EIM_A18 0x0a4 0x438 0x000 0x0 0x0
-#define MX51_PAD_EIM_A18__GPIO2_12 0x0a4 0x438 0x000 0x1 0x0
-#define MX51_PAD_EIM_A19__BOOT_LPB1 0x0a8 0x43c 0x000 0x7 0x0
-#define MX51_PAD_EIM_A19__EIM_A19 0x0a8 0x43c 0x000 0x0 0x0
-#define MX51_PAD_EIM_A19__GPIO2_13 0x0a8 0x43c 0x000 0x1 0x0
-#define MX51_PAD_EIM_A20__BOOT_UART_SRC0 0x0ac 0x440 0x000 0x7 0x0
-#define MX51_PAD_EIM_A20__EIM_A20 0x0ac 0x440 0x000 0x0 0x0
-#define MX51_PAD_EIM_A20__GPIO2_14 0x0ac 0x440 0x000 0x1 0x0
-#define MX51_PAD_EIM_A21__BOOT_UART_SRC1 0x0b0 0x444 0x000 0x7 0x0
-#define MX51_PAD_EIM_A21__EIM_A21 0x0b0 0x444 0x000 0x0 0x0
-#define MX51_PAD_EIM_A21__GPIO2_15 0x0b0 0x444 0x000 0x1 0x0
-#define MX51_PAD_EIM_A22__EIM_A22 0x0b4 0x448 0x000 0x0 0x0
-#define MX51_PAD_EIM_A22__GPIO2_16 0x0b4 0x448 0x000 0x1 0x0
-#define MX51_PAD_EIM_A23__BOOT_HPN_EN 0x0b8 0x44c 0x000 0x7 0x0
-#define MX51_PAD_EIM_A23__EIM_A23 0x0b8 0x44c 0x000 0x0 0x0
-#define MX51_PAD_EIM_A23__GPIO2_17 0x0b8 0x44c 0x000 0x1 0x0
-#define MX51_PAD_EIM_A24__EIM_A24 0x0bc 0x450 0x000 0x0 0x0
-#define MX51_PAD_EIM_A24__GPIO2_18 0x0bc 0x450 0x000 0x1 0x0
-#define MX51_PAD_EIM_A24__USBH2_CLK 0x0bc 0x450 0x000 0x2 0x0
-#define MX51_PAD_EIM_A25__DISP1_PIN4 0x0c0 0x454 0x000 0x6 0x0
-#define MX51_PAD_EIM_A25__EIM_A25 0x0c0 0x454 0x000 0x0 0x0
-#define MX51_PAD_EIM_A25__GPIO2_19 0x0c0 0x454 0x000 0x1 0x0
-#define MX51_PAD_EIM_A25__USBH2_DIR 0x0c0 0x454 0x000 0x2 0x0
-#define MX51_PAD_EIM_A26__CSI1_DATA_EN 0x0c4 0x458 0x9a0 0x5 0x0
-#define MX51_PAD_EIM_A26__DISP2_EXT_CLK 0x0c4 0x458 0x908 0x6 0x0
-#define MX51_PAD_EIM_A26__EIM_A26 0x0c4 0x458 0x000 0x0 0x0
-#define MX51_PAD_EIM_A26__GPIO2_20 0x0c4 0x458 0x000 0x1 0x0
-#define MX51_PAD_EIM_A26__USBH2_STP 0x0c4 0x458 0x000 0x2 0x0
-#define MX51_PAD_EIM_A27__CSI2_DATA_EN 0x0c8 0x45c 0x99c 0x5 0x0
-#define MX51_PAD_EIM_A27__DISP1_PIN1 0x0c8 0x45c 0x9a4 0x6 0x0
-#define MX51_PAD_EIM_A27__EIM_A27 0x0c8 0x45c 0x000 0x0 0x0
-#define MX51_PAD_EIM_A27__GPIO2_21 0x0c8 0x45c 0x000 0x1 0x0
-#define MX51_PAD_EIM_A27__USBH2_NXT 0x0c8 0x45c 0x000 0x2 0x0
-#define MX51_PAD_EIM_EB0__EIM_EB0 0x0cc 0x460 0x000 0x0 0x0
-#define MX51_PAD_EIM_EB1__EIM_EB1 0x0d0 0x464 0x000 0x0 0x0
-#define MX51_PAD_EIM_EB2__AUD5_RXFS 0x0d4 0x468 0x8e0 0x6 0x0
-#define MX51_PAD_EIM_EB2__CSI1_D2 0x0d4 0x468 0x000 0x5 0x0
-#define MX51_PAD_EIM_EB2__EIM_EB2 0x0d4 0x468 0x000 0x0 0x0
-#define MX51_PAD_EIM_EB2__FEC_MDIO 0x0d4 0x468 0x954 0x3 0x0
-#define MX51_PAD_EIM_EB2__GPIO2_22 0x0d4 0x468 0x000 0x1 0x0
-#define MX51_PAD_EIM_EB2__GPT_CMPOUT1 0x0d4 0x468 0x000 0x7 0x0
-#define MX51_PAD_EIM_EB3__AUD5_RXC 0x0d8 0x46c 0x8dc 0x6 0x0
-#define MX51_PAD_EIM_EB3__CSI1_D3 0x0d8 0x46c 0x000 0x5 0x0
-#define MX51_PAD_EIM_EB3__EIM_EB3 0x0d8 0x46c 0x000 0x0 0x0
-#define MX51_PAD_EIM_EB3__FEC_RDATA1 0x0d8 0x46c 0x95c 0x3 0x0
-#define MX51_PAD_EIM_EB3__GPIO2_23 0x0d8 0x46c 0x000 0x1 0x0
-#define MX51_PAD_EIM_EB3__GPT_CMPOUT2 0x0d8 0x46c 0x000 0x7 0x0
-#define MX51_PAD_EIM_OE__EIM_OE 0x0dc 0x470 0x000 0x0 0x0
-#define MX51_PAD_EIM_OE__GPIO2_24 0x0dc 0x470 0x000 0x1 0x0
-#define MX51_PAD_EIM_CS0__EIM_CS0 0x0e0 0x474 0x000 0x0 0x0
-#define MX51_PAD_EIM_CS0__GPIO2_25 0x0e0 0x474 0x000 0x1 0x0
-#define MX51_PAD_EIM_CS1__EIM_CS1 0x0e4 0x478 0x000 0x0 0x0
-#define MX51_PAD_EIM_CS1__GPIO2_26 0x0e4 0x478 0x000 0x1 0x0
-#define MX51_PAD_EIM_CS2__AUD5_TXD 0x0e8 0x47c 0x8d8 0x6 0x1
-#define MX51_PAD_EIM_CS2__CSI1_D4 0x0e8 0x47c 0x000 0x5 0x0
-#define MX51_PAD_EIM_CS2__EIM_CS2 0x0e8 0x47c 0x000 0x0 0x0
-#define MX51_PAD_EIM_CS2__FEC_RDATA2 0x0e8 0x47c 0x960 0x3 0x0
-#define MX51_PAD_EIM_CS2__GPIO2_27 0x0e8 0x47c 0x000 0x1 0x0
-#define MX51_PAD_EIM_CS2__USBOTG_STP 0x0e8 0x47c 0x000 0x2 0x0
-#define MX51_PAD_EIM_CS3__AUD5_RXD 0x0ec 0x480 0x8d4 0x6 0x1
-#define MX51_PAD_EIM_CS3__CSI1_D5 0x0ec 0x480 0x000 0x5 0x0
-#define MX51_PAD_EIM_CS3__EIM_CS3 0x0ec 0x480 0x000 0x0 0x0
-#define MX51_PAD_EIM_CS3__FEC_RDATA3 0x0ec 0x480 0x964 0x3 0x0
-#define MX51_PAD_EIM_CS3__GPIO2_28 0x0ec 0x480 0x000 0x1 0x0
-#define MX51_PAD_EIM_CS3__USBOTG_NXT 0x0ec 0x480 0x000 0x2 0x0
-#define MX51_PAD_EIM_CS4__AUD5_TXC 0x0f0 0x484 0x8e4 0x6 0x1
-#define MX51_PAD_EIM_CS4__CSI1_D6 0x0f0 0x484 0x000 0x5 0x0
-#define MX51_PAD_EIM_CS4__EIM_CS4 0x0f0 0x484 0x000 0x0 0x0
-#define MX51_PAD_EIM_CS4__FEC_RX_ER 0x0f0 0x484 0x970 0x3 0x0
-#define MX51_PAD_EIM_CS4__GPIO2_29 0x0f0 0x484 0x000 0x1 0x0
-#define MX51_PAD_EIM_CS4__USBOTG_CLK 0x0f0 0x484 0x000 0x2 0x0
-#define MX51_PAD_EIM_CS5__AUD5_TXFS 0x0f4 0x488 0x8e8 0x6 0x1
-#define MX51_PAD_EIM_CS5__CSI1_D7 0x0f4 0x488 0x000 0x5 0x0
-#define MX51_PAD_EIM_CS5__DISP1_EXT_CLK 0x0f4 0x488 0x904 0x4 0x0
-#define MX51_PAD_EIM_CS5__EIM_CS5 0x0f4 0x488 0x000 0x0 0x0
-#define MX51_PAD_EIM_CS5__FEC_CRS 0x0f4 0x488 0x950 0x3 0x0
-#define MX51_PAD_EIM_CS5__GPIO2_30 0x0f4 0x488 0x000 0x1 0x0
-#define MX51_PAD_EIM_CS5__USBOTG_DIR 0x0f4 0x488 0x000 0x2 0x0
-#define MX51_PAD_EIM_DTACK__EIM_DTACK 0x0f8 0x48c 0x000 0x0 0x0
-#define MX51_PAD_EIM_DTACK__GPIO2_31 0x0f8 0x48c 0x000 0x1 0x0
-#define MX51_PAD_EIM_LBA__EIM_LBA 0x0fc 0x494 0x000 0x0 0x0
-#define MX51_PAD_EIM_LBA__GPIO3_1 0x0fc 0x494 0x978 0x1 0x0
-#define MX51_PAD_EIM_CRE__EIM_CRE 0x100 0x4a0 0x000 0x0 0x0
-#define MX51_PAD_EIM_CRE__GPIO3_2 0x100 0x4a0 0x97c 0x1 0x0
-#define MX51_PAD_DRAM_CS1__DRAM_CS1 0x104 0x4d0 0x000 0x0 0x0
-#define MX51_PAD_NANDF_WE_B__GPIO3_3 0x108 0x4e4 0x980 0x3 0x0
-#define MX51_PAD_NANDF_WE_B__NANDF_WE_B 0x108 0x4e4 0x000 0x0 0x0
-#define MX51_PAD_NANDF_WE_B__PATA_DIOW 0x108 0x4e4 0x000 0x1 0x0
-#define MX51_PAD_NANDF_WE_B__SD3_DATA0 0x108 0x4e4 0x93c 0x2 0x0
-#define MX51_PAD_NANDF_RE_B__GPIO3_4 0x10c 0x4e8 0x984 0x3 0x0
-#define MX51_PAD_NANDF_RE_B__NANDF_RE_B 0x10c 0x4e8 0x000 0x0 0x0
-#define MX51_PAD_NANDF_RE_B__PATA_DIOR 0x10c 0x4e8 0x000 0x1 0x0
-#define MX51_PAD_NANDF_RE_B__SD3_DATA1 0x10c 0x4e8 0x940 0x2 0x0
-#define MX51_PAD_NANDF_ALE__GPIO3_5 0x110 0x4ec 0x988 0x3 0x0
-#define MX51_PAD_NANDF_ALE__NANDF_ALE 0x110 0x4ec 0x000 0x0 0x0
-#define MX51_PAD_NANDF_ALE__PATA_BUFFER_EN 0x110 0x4ec 0x000 0x1 0x0
-#define MX51_PAD_NANDF_CLE__GPIO3_6 0x114 0x4f0 0x98c 0x3 0x0
-#define MX51_PAD_NANDF_CLE__NANDF_CLE 0x114 0x4f0 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CLE__PATA_RESET_B 0x114 0x4f0 0x000 0x1 0x0
-#define MX51_PAD_NANDF_WP_B__GPIO3_7 0x118 0x4f4 0x990 0x3 0x0
-#define MX51_PAD_NANDF_WP_B__NANDF_WP_B 0x118 0x4f4 0x000 0x0 0x0
-#define MX51_PAD_NANDF_WP_B__PATA_DMACK 0x118 0x4f4 0x000 0x1 0x0
-#define MX51_PAD_NANDF_WP_B__SD3_DATA2 0x118 0x4f4 0x944 0x2 0x0
-#define MX51_PAD_NANDF_RB0__ECSPI2_SS1 0x11c 0x4f8 0x930 0x5 0x0
-#define MX51_PAD_NANDF_RB0__GPIO3_8 0x11c 0x4f8 0x994 0x3 0x0
-#define MX51_PAD_NANDF_RB0__NANDF_RB0 0x11c 0x4f8 0x000 0x0 0x0
-#define MX51_PAD_NANDF_RB0__PATA_DMARQ 0x11c 0x4f8 0x000 0x1 0x0
-#define MX51_PAD_NANDF_RB0__SD3_DATA3 0x11c 0x4f8 0x948 0x2 0x0
-#define MX51_PAD_NANDF_RB1__CSPI_MOSI 0x120 0x4fc 0x91c 0x6 0x0
-#define MX51_PAD_NANDF_RB1__ECSPI2_RDY 0x120 0x4fc 0x000 0x2 0x0
-#define MX51_PAD_NANDF_RB1__GPIO3_9 0x120 0x4fc 0x000 0x3 0x0
-#define MX51_PAD_NANDF_RB1__NANDF_RB1 0x120 0x4fc 0x000 0x0 0x0
-#define MX51_PAD_NANDF_RB1__PATA_IORDY 0x120 0x4fc 0x000 0x1 0x0
-#define MX51_PAD_NANDF_RB1__SD4_CMD 0x120 0x4fc 0x000 0x5 0x0
-#define MX51_PAD_NANDF_RB2__DISP2_WAIT 0x124 0x500 0x9a8 0x5 0x0
-#define MX51_PAD_NANDF_RB2__ECSPI2_SCLK 0x124 0x500 0x000 0x2 0x0
-#define MX51_PAD_NANDF_RB2__FEC_COL 0x124 0x500 0x94c 0x1 0x0
-#define MX51_PAD_NANDF_RB2__GPIO3_10 0x124 0x500 0x000 0x3 0x0
-#define MX51_PAD_NANDF_RB2__NANDF_RB2 0x124 0x500 0x000 0x0 0x0
-#define MX51_PAD_NANDF_RB2__USBH3_H3_DP 0x124 0x500 0x000 0x7 0x0
-#define MX51_PAD_NANDF_RB2__USBH3_NXT 0x124 0x500 0xa20 0x6 0x0
-#define MX51_PAD_NANDF_RB3__DISP1_WAIT 0x128 0x504 0x000 0x5 0x0
-#define MX51_PAD_NANDF_RB3__ECSPI2_MISO 0x128 0x504 0x000 0x2 0x0
-#define MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x128 0x504 0x968 0x1 0x0
-#define MX51_PAD_NANDF_RB3__GPIO3_11 0x128 0x504 0x000 0x3 0x0
-#define MX51_PAD_NANDF_RB3__NANDF_RB3 0x128 0x504 0x000 0x0 0x0
-#define MX51_PAD_NANDF_RB3__USBH3_CLK 0x128 0x504 0x9f8 0x6 0x0
-#define MX51_PAD_NANDF_RB3__USBH3_H3_DM 0x128 0x504 0x000 0x7 0x0
-#define MX51_PAD_GPIO_NAND__GPIO_NAND 0x12c 0x514 0x998 0x0 0x0
-#define MX51_PAD_GPIO_NAND__PATA_INTRQ 0x12c 0x514 0x000 0x1 0x0
-#define MX51_PAD_NANDF_CS0__GPIO3_16 0x130 0x518 0x000 0x3 0x0
-#define MX51_PAD_NANDF_CS0__NANDF_CS0 0x130 0x518 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CS1__GPIO3_17 0x134 0x51c 0x000 0x3 0x0
-#define MX51_PAD_NANDF_CS1__NANDF_CS1 0x134 0x51c 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CS2__CSPI_SCLK 0x138 0x520 0x914 0x6 0x0
-#define MX51_PAD_NANDF_CS2__FEC_TX_ER 0x138 0x520 0x000 0x2 0x0
-#define MX51_PAD_NANDF_CS2__GPIO3_18 0x138 0x520 0x000 0x3 0x0
-#define MX51_PAD_NANDF_CS2__NANDF_CS2 0x138 0x520 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CS2__PATA_CS_0 0x138 0x520 0x000 0x1 0x0
-#define MX51_PAD_NANDF_CS2__SD4_CLK 0x138 0x520 0x000 0x5 0x0
-#define MX51_PAD_NANDF_CS2__USBH3_H1_DP 0x138 0x520 0x000 0x7 0x0
-#define MX51_PAD_NANDF_CS3__FEC_MDC 0x13c 0x524 0x000 0x2 0x0
-#define MX51_PAD_NANDF_CS3__GPIO3_19 0x13c 0x524 0x000 0x3 0x0
-#define MX51_PAD_NANDF_CS3__NANDF_CS3 0x13c 0x524 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CS3__PATA_CS_1 0x13c 0x524 0x000 0x1 0x0
-#define MX51_PAD_NANDF_CS3__SD4_DAT0 0x13c 0x524 0x000 0x5 0x0
-#define MX51_PAD_NANDF_CS3__USBH3_H1_DM 0x13c 0x524 0x000 0x7 0x0
-#define MX51_PAD_NANDF_CS4__FEC_TDATA1 0x140 0x528 0x000 0x2 0x0
-#define MX51_PAD_NANDF_CS4__GPIO3_20 0x140 0x528 0x000 0x3 0x0
-#define MX51_PAD_NANDF_CS4__NANDF_CS4 0x140 0x528 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CS4__PATA_DA_0 0x140 0x528 0x000 0x1 0x0
-#define MX51_PAD_NANDF_CS4__SD4_DAT1 0x140 0x528 0x000 0x5 0x0
-#define MX51_PAD_NANDF_CS4__USBH3_STP 0x140 0x528 0xa24 0x7 0x0
-#define MX51_PAD_NANDF_CS5__FEC_TDATA2 0x144 0x52c 0x000 0x2 0x0
-#define MX51_PAD_NANDF_CS5__GPIO3_21 0x144 0x52c 0x000 0x3 0x0
-#define MX51_PAD_NANDF_CS5__NANDF_CS5 0x144 0x52c 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CS5__PATA_DA_1 0x144 0x52c 0x000 0x1 0x0
-#define MX51_PAD_NANDF_CS5__SD4_DAT2 0x144 0x52c 0x000 0x5 0x0
-#define MX51_PAD_NANDF_CS5__USBH3_DIR 0x144 0x52c 0xa1c 0x7 0x0
-#define MX51_PAD_NANDF_CS6__CSPI_SS3 0x148 0x530 0x928 0x7 0x0
-#define MX51_PAD_NANDF_CS6__FEC_TDATA3 0x148 0x530 0x000 0x2 0x0
-#define MX51_PAD_NANDF_CS6__GPIO3_22 0x148 0x530 0x000 0x3 0x0
-#define MX51_PAD_NANDF_CS6__NANDF_CS6 0x148 0x530 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CS6__PATA_DA_2 0x148 0x530 0x000 0x1 0x0
-#define MX51_PAD_NANDF_CS6__SD4_DAT3 0x148 0x530 0x000 0x5 0x0
-#define MX51_PAD_NANDF_CS7__FEC_TX_EN 0x14c 0x534 0x000 0x1 0x0
-#define MX51_PAD_NANDF_CS7__GPIO3_23 0x14c 0x534 0x000 0x3 0x0
-#define MX51_PAD_NANDF_CS7__NANDF_CS7 0x14c 0x534 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CS7__SD3_CLK 0x14c 0x534 0x000 0x5 0x0
-#define MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0 0x150 0x538 0x000 0x2 0x0
-#define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x150 0x538 0x974 0x1 0x0
-#define MX51_PAD_NANDF_RDY_INT__GPIO3_24 0x150 0x538 0x000 0x3 0x0
-#define MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT 0x150 0x538 0x938 0x0 0x0
-#define MX51_PAD_NANDF_RDY_INT__SD3_CMD 0x150 0x538 0x000 0x5 0x0
-#define MX51_PAD_NANDF_D15__ECSPI2_MOSI 0x154 0x53c 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D15__GPIO3_25 0x154 0x53c 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D15__NANDF_D15 0x154 0x53c 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D15__PATA_DATA15 0x154 0x53c 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D15__SD3_DAT7 0x154 0x53c 0x000 0x5 0x0
-#define MX51_PAD_NANDF_D14__ECSPI2_SS3 0x158 0x540 0x934 0x2 0x0
-#define MX51_PAD_NANDF_D14__GPIO3_26 0x158 0x540 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D14__NANDF_D14 0x158 0x540 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D14__PATA_DATA14 0x158 0x540 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D14__SD3_DAT6 0x158 0x540 0x000 0x5 0x0
-#define MX51_PAD_NANDF_D13__ECSPI2_SS2 0x15c 0x544 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D13__GPIO3_27 0x15c 0x544 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D13__NANDF_D13 0x15c 0x544 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D13__PATA_DATA13 0x15c 0x544 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D13__SD3_DAT5 0x15c 0x544 0x000 0x5 0x0
-#define MX51_PAD_NANDF_D12__ECSPI2_SS1 0x160 0x548 0x930 0x2 0x1
-#define MX51_PAD_NANDF_D12__GPIO3_28 0x160 0x548 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D12__NANDF_D12 0x160 0x548 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D12__PATA_DATA12 0x160 0x548 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D12__SD3_DAT4 0x160 0x548 0x000 0x5 0x0
-#define MX51_PAD_NANDF_D11__FEC_RX_DV 0x164 0x54c 0x96c 0x2 0x0
-#define MX51_PAD_NANDF_D11__GPIO3_29 0x164 0x54c 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D11__NANDF_D11 0x164 0x54c 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D11__PATA_DATA11 0x164 0x54c 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D11__SD3_DATA3 0x164 0x54c 0x948 0x5 0x1
-#define MX51_PAD_NANDF_D10__GPIO3_30 0x168 0x550 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D10__NANDF_D10 0x168 0x550 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D10__PATA_DATA10 0x168 0x550 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D10__SD3_DATA2 0x168 0x550 0x944 0x5 0x1
-#define MX51_PAD_NANDF_D9__FEC_RDATA0 0x16c 0x554 0x958 0x2 0x0
-#define MX51_PAD_NANDF_D9__GPIO3_31 0x16c 0x554 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D9__NANDF_D9 0x16c 0x554 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D9__PATA_DATA9 0x16c 0x554 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D9__SD3_DATA1 0x16c 0x554 0x940 0x5 0x1
-#define MX51_PAD_NANDF_D8__FEC_TDATA0 0x170 0x558 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D8__GPIO4_0 0x170 0x558 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D8__NANDF_D8 0x170 0x558 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D8__PATA_DATA8 0x170 0x558 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D8__SD3_DATA0 0x170 0x558 0x93c 0x5 0x1
-#define MX51_PAD_NANDF_D7__GPIO4_1 0x174 0x55c 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D7__NANDF_D7 0x174 0x55c 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D7__PATA_DATA7 0x174 0x55c 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D7__USBH3_DATA0 0x174 0x55c 0x9fc 0x5 0x0
-#define MX51_PAD_NANDF_D6__GPIO4_2 0x178 0x560 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D6__NANDF_D6 0x178 0x560 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D6__PATA_DATA6 0x178 0x560 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D6__SD4_LCTL 0x178 0x560 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D6__USBH3_DATA1 0x178 0x560 0xa00 0x5 0x0
-#define MX51_PAD_NANDF_D5__GPIO4_3 0x17c 0x564 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D5__NANDF_D5 0x17c 0x564 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D5__PATA_DATA5 0x17c 0x564 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D5__SD4_WP 0x17c 0x564 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D5__USBH3_DATA2 0x17c 0x564 0xa04 0x5 0x0
-#define MX51_PAD_NANDF_D4__GPIO4_4 0x180 0x568 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D4__NANDF_D4 0x180 0x568 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D4__PATA_DATA4 0x180 0x568 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D4__SD4_CD 0x180 0x568 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D4__USBH3_DATA3 0x180 0x568 0xa08 0x5 0x0
-#define MX51_PAD_NANDF_D3__GPIO4_5 0x184 0x56c 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D3__NANDF_D3 0x184 0x56c 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D3__PATA_DATA3 0x184 0x56c 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D3__SD4_DAT4 0x184 0x56c 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D3__USBH3_DATA4 0x184 0x56c 0xa0c 0x5 0x0
-#define MX51_PAD_NANDF_D2__GPIO4_6 0x188 0x570 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D2__NANDF_D2 0x188 0x570 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D2__PATA_DATA2 0x188 0x570 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D2__SD4_DAT5 0x188 0x570 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D2__USBH3_DATA5 0x188 0x570 0xa10 0x5 0x0
-#define MX51_PAD_NANDF_D1__GPIO4_7 0x18c 0x574 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D1__NANDF_D1 0x18c 0x574 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D1__PATA_DATA1 0x18c 0x574 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D1__SD4_DAT6 0x18c 0x574 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D1__USBH3_DATA6 0x18c 0x574 0xa14 0x5 0x0
-#define MX51_PAD_NANDF_D0__GPIO4_8 0x190 0x578 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D0__NANDF_D0 0x190 0x578 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D0__PATA_DATA0 0x190 0x578 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D0__SD4_DAT7 0x190 0x578 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D0__USBH3_DATA7 0x190 0x578 0xa18 0x5 0x0
-#define MX51_PAD_CSI1_D8__CSI1_D8 0x194 0x57c 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D8__GPIO3_12 0x194 0x57c 0x998 0x3 0x1
-#define MX51_PAD_CSI1_D9__CSI1_D9 0x198 0x580 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D9__GPIO3_13 0x198 0x580 0x000 0x3 0x0
-#define MX51_PAD_CSI1_D10__CSI1_D10 0x19c 0x584 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D11__CSI1_D11 0x1a0 0x588 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D12__CSI1_D12 0x1a4 0x58c 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D13__CSI1_D13 0x1a8 0x590 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D14__CSI1_D14 0x1ac 0x594 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D15__CSI1_D15 0x1b0 0x598 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D16__CSI1_D16 0x1b4 0x59c 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D17__CSI1_D17 0x1b8 0x5a0 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D18__CSI1_D18 0x1bc 0x5a4 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D19__CSI1_D19 0x1c0 0x5a8 0x000 0x0 0x0
-#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC 0x1c4 0x5ac 0x000 0x0 0x0
-#define MX51_PAD_CSI1_VSYNC__GPIO3_14 0x1c4 0x5ac 0x000 0x3 0x0
-#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC 0x1c8 0x5b0 0x000 0x0 0x0
-#define MX51_PAD_CSI1_HSYNC__GPIO3_15 0x1c8 0x5b0 0x000 0x3 0x0
-#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK 0x000 0x5b4 0x000 0x0 0x0
-#define MX51_PAD_CSI1_MCLK__CSI1_MCLK 0x000 0x5b8 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D12__CSI2_D12 0x1cc 0x5bc 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D12__GPIO4_9 0x1cc 0x5bc 0x000 0x3 0x0
-#define MX51_PAD_CSI2_D13__CSI2_D13 0x1d0 0x5c0 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D13__GPIO4_10 0x1d0 0x5c0 0x000 0x3 0x0
-#define MX51_PAD_CSI2_D14__CSI2_D14 0x1d4 0x5c4 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D15__CSI2_D15 0x1d8 0x5c8 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D16__CSI2_D16 0x1dc 0x5cc 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D17__CSI2_D17 0x1e0 0x5d0 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D18__CSI2_D18 0x1e4 0x5d4 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D18__GPIO4_11 0x1e4 0x5d4 0x000 0x3 0x0
-#define MX51_PAD_CSI2_D19__CSI2_D19 0x1e8 0x5d8 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D19__GPIO4_12 0x1e8 0x5d8 0x000 0x3 0x0
-#define MX51_PAD_CSI2_VSYNC__CSI2_VSYNC 0x1ec 0x5dc 0x000 0x0 0x0
-#define MX51_PAD_CSI2_VSYNC__GPIO4_13 0x1ec 0x5dc 0x000 0x3 0x0
-#define MX51_PAD_CSI2_HSYNC__CSI2_HSYNC 0x1f0 0x5e0 0x000 0x0 0x0
-#define MX51_PAD_CSI2_HSYNC__GPIO4_14 0x1f0 0x5e0 0x000 0x3 0x0
-#define MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK 0x1f4 0x5e4 0x000 0x0 0x0
-#define MX51_PAD_CSI2_PIXCLK__GPIO4_15 0x1f4 0x5e4 0x000 0x3 0x0
-#define MX51_PAD_I2C1_CLK__GPIO4_16 0x1f8 0x5e8 0x000 0x3 0x0
-#define MX51_PAD_I2C1_CLK__I2C1_CLK 0x1f8 0x5e8 0x000 0x0 0x0
-#define MX51_PAD_I2C1_DAT__GPIO4_17 0x1fc 0x5ec 0x000 0x3 0x0
-#define MX51_PAD_I2C1_DAT__I2C1_DAT 0x1fc 0x5ec 0x000 0x0 0x0
-#define MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x200 0x5f0 0x000 0x0 0x0
-#define MX51_PAD_AUD3_BB_TXD__GPIO4_18 0x200 0x5f0 0x000 0x3 0x0
-#define MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x204 0x5f4 0x000 0x0 0x0
-#define MX51_PAD_AUD3_BB_RXD__GPIO4_19 0x204 0x5f4 0x000 0x3 0x0
-#define MX51_PAD_AUD3_BB_RXD__UART3_RXD 0x204 0x5f4 0x9f4 0x1 0x2
-#define MX51_PAD_AUD3_BB_CK__AUD3_TXC 0x208 0x5f8 0x000 0x0 0x0
-#define MX51_PAD_AUD3_BB_CK__GPIO4_20 0x208 0x5f8 0x000 0x3 0x0
-#define MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x20c 0x5fc 0x000 0x0 0x0
-#define MX51_PAD_AUD3_BB_FS__GPIO4_21 0x20c 0x5fc 0x000 0x3 0x0
-#define MX51_PAD_AUD3_BB_FS__UART3_TXD 0x20c 0x5fc 0x000 0x1 0x0
-#define MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x210 0x600 0x000 0x0 0x0
-#define MX51_PAD_CSPI1_MOSI__GPIO4_22 0x210 0x600 0x000 0x3 0x0
-#define MX51_PAD_CSPI1_MOSI__I2C1_SDA 0x210 0x600 0x9b4 0x1 0x1
-#define MX51_PAD_CSPI1_MISO__AUD4_RXD 0x214 0x604 0x8c4 0x1 0x1
-#define MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x214 0x604 0x000 0x0 0x0
-#define MX51_PAD_CSPI1_MISO__GPIO4_23 0x214 0x604 0x000 0x3 0x0
-#define MX51_PAD_CSPI1_SS0__AUD4_TXC 0x218 0x608 0x8cc 0x1 0x1
-#define MX51_PAD_CSPI1_SS0__ECSPI1_SS0 0x218 0x608 0x000 0x0 0x0
-#define MX51_PAD_CSPI1_SS0__GPIO4_24 0x218 0x608 0x000 0x3 0x0
-#define MX51_PAD_CSPI1_SS1__AUD4_TXD 0x21c 0x60c 0x8c8 0x1 0x1
-#define MX51_PAD_CSPI1_SS1__ECSPI1_SS1 0x21c 0x60c 0x000 0x0 0x0
-#define MX51_PAD_CSPI1_SS1__GPIO4_25 0x21c 0x60c 0x000 0x3 0x0
-#define MX51_PAD_CSPI1_RDY__AUD4_TXFS 0x220 0x610 0x8d0 0x1 0x1
-#define MX51_PAD_CSPI1_RDY__ECSPI1_RDY 0x220 0x610 0x000 0x0 0x0
-#define MX51_PAD_CSPI1_RDY__GPIO4_26 0x220 0x610 0x000 0x3 0x0
-#define MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x224 0x614 0x000 0x0 0x0
-#define MX51_PAD_CSPI1_SCLK__GPIO4_27 0x224 0x614 0x000 0x3 0x0
-#define MX51_PAD_CSPI1_SCLK__I2C1_SCL 0x224 0x614 0x9b0 0x1 0x1
-#define MX51_PAD_UART1_RXD__GPIO4_28 0x228 0x618 0x000 0x3 0x0
-#define MX51_PAD_UART1_RXD__UART1_RXD 0x228 0x618 0x9e4 0x0 0x0
-#define MX51_PAD_UART1_TXD__GPIO4_29 0x22c 0x61c 0x000 0x3 0x0
-#define MX51_PAD_UART1_TXD__PWM2_PWMO 0x22c 0x61c 0x000 0x1 0x0
-#define MX51_PAD_UART1_TXD__UART1_TXD 0x22c 0x61c 0x000 0x0 0x0
-#define MX51_PAD_UART1_RTS__GPIO4_30 0x230 0x620 0x000 0x3 0x0
-#define MX51_PAD_UART1_RTS__UART1_RTS 0x230 0x620 0x9e0 0x0 0x0
-#define MX51_PAD_UART1_CTS__GPIO4_31 0x234 0x624 0x000 0x3 0x0
-#define MX51_PAD_UART1_CTS__UART1_CTS 0x234 0x624 0x000 0x0 0x0
-#define MX51_PAD_UART2_RXD__FIRI_TXD 0x238 0x628 0x000 0x1 0x0
-#define MX51_PAD_UART2_RXD__GPIO1_20 0x238 0x628 0x000 0x3 0x0
-#define MX51_PAD_UART2_RXD__UART2_RXD 0x238 0x628 0x9ec 0x0 0x2
-#define MX51_PAD_UART2_TXD__FIRI_RXD 0x23c 0x62c 0x000 0x1 0x0
-#define MX51_PAD_UART2_TXD__GPIO1_21 0x23c 0x62c 0x000 0x3 0x0
-#define MX51_PAD_UART2_TXD__UART2_TXD 0x23c 0x62c 0x000 0x0 0x0
-#define MX51_PAD_UART3_RXD__CSI1_D0 0x240 0x630 0x000 0x2 0x0
-#define MX51_PAD_UART3_RXD__GPIO1_22 0x240 0x630 0x000 0x3 0x0
-#define MX51_PAD_UART3_RXD__UART1_DTR 0x240 0x630 0x000 0x0 0x0
-#define MX51_PAD_UART3_RXD__UART3_RXD 0x240 0x630 0x9f4 0x1 0x4
-#define MX51_PAD_UART3_TXD__CSI1_D1 0x244 0x634 0x000 0x2 0x0
-#define MX51_PAD_UART3_TXD__GPIO1_23 0x244 0x634 0x000 0x3 0x0
-#define MX51_PAD_UART3_TXD__UART1_DSR 0x244 0x634 0x000 0x0 0x0
-#define MX51_PAD_UART3_TXD__UART3_TXD 0x244 0x634 0x000 0x1 0x0
-#define MX51_PAD_OWIRE_LINE__GPIO1_24 0x248 0x638 0x000 0x3 0x0
-#define MX51_PAD_OWIRE_LINE__OWIRE_LINE 0x248 0x638 0x000 0x0 0x0
-#define MX51_PAD_OWIRE_LINE__SPDIF_OUT 0x248 0x638 0x000 0x6 0x0
-#define MX51_PAD_KEY_ROW0__KEY_ROW0 0x24c 0x63c 0x000 0x0 0x0
-#define MX51_PAD_KEY_ROW1__KEY_ROW1 0x250 0x640 0x000 0x0 0x0
-#define MX51_PAD_KEY_ROW2__KEY_ROW2 0x254 0x644 0x000 0x0 0x0
-#define MX51_PAD_KEY_ROW3__KEY_ROW3 0x258 0x648 0x000 0x0 0x0
-#define MX51_PAD_KEY_COL0__KEY_COL0 0x25c 0x64c 0x000 0x0 0x0
-#define MX51_PAD_KEY_COL0__PLL1_BYP 0x25c 0x64c 0x90c 0x7 0x0
-#define MX51_PAD_KEY_COL1__KEY_COL1 0x260 0x650 0x000 0x0 0x0
-#define MX51_PAD_KEY_COL1__PLL2_BYP 0x260 0x650 0x910 0x7 0x0
-#define MX51_PAD_KEY_COL2__KEY_COL2 0x264 0x654 0x000 0x0 0x0
-#define MX51_PAD_KEY_COL2__PLL3_BYP 0x264 0x654 0x000 0x7 0x0
-#define MX51_PAD_KEY_COL3__KEY_COL3 0x268 0x658 0x000 0x0 0x0
-#define MX51_PAD_KEY_COL4__I2C2_SCL 0x26c 0x65c 0x9b8 0x3 0x1
-#define MX51_PAD_KEY_COL4__KEY_COL4 0x26c 0x65c 0x000 0x0 0x0
-#define MX51_PAD_KEY_COL4__SPDIF_OUT1 0x26c 0x65c 0x000 0x6 0x0
-#define MX51_PAD_KEY_COL4__UART1_RI 0x26c 0x65c 0x000 0x1 0x0
-#define MX51_PAD_KEY_COL4__UART3_RTS 0x26c 0x65c 0x9f0 0x2 0x4
-#define MX51_PAD_KEY_COL5__I2C2_SDA 0x270 0x660 0x9bc 0x3 0x1
-#define MX51_PAD_KEY_COL5__KEY_COL5 0x270 0x660 0x000 0x0 0x0
-#define MX51_PAD_KEY_COL5__UART1_DCD 0x270 0x660 0x000 0x1 0x0
-#define MX51_PAD_KEY_COL5__UART3_CTS 0x270 0x660 0x000 0x2 0x0
-#define MX51_PAD_USBH1_CLK__CSPI_SCLK 0x278 0x678 0x914 0x1 0x1
-#define MX51_PAD_USBH1_CLK__GPIO1_25 0x278 0x678 0x000 0x2 0x0
-#define MX51_PAD_USBH1_CLK__I2C2_SCL 0x278 0x678 0x9b8 0x5 0x2
-#define MX51_PAD_USBH1_CLK__USBH1_CLK 0x278 0x678 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DIR__CSPI_MOSI 0x27c 0x67c 0x91c 0x1 0x1
-#define MX51_PAD_USBH1_DIR__GPIO1_26 0x27c 0x67c 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DIR__I2C2_SDA 0x27c 0x67c 0x9bc 0x5 0x2
-#define MX51_PAD_USBH1_DIR__USBH1_DIR 0x27c 0x67c 0x000 0x0 0x0
-#define MX51_PAD_USBH1_STP__CSPI_RDY 0x280 0x680 0x000 0x1 0x0
-#define MX51_PAD_USBH1_STP__GPIO1_27 0x280 0x680 0x000 0x2 0x0
-#define MX51_PAD_USBH1_STP__UART3_RXD 0x280 0x680 0x9f4 0x5 0x6
-#define MX51_PAD_USBH1_STP__USBH1_STP 0x280 0x680 0x000 0x0 0x0
-#define MX51_PAD_USBH1_NXT__CSPI_MISO 0x284 0x684 0x918 0x1 0x0
-#define MX51_PAD_USBH1_NXT__GPIO1_28 0x284 0x684 0x000 0x2 0x0
-#define MX51_PAD_USBH1_NXT__UART3_TXD 0x284 0x684 0x000 0x5 0x0
-#define MX51_PAD_USBH1_NXT__USBH1_NXT 0x284 0x684 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DATA0__GPIO1_11 0x288 0x688 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DATA0__UART2_CTS 0x288 0x688 0x000 0x1 0x0
-#define MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x288 0x688 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DATA1__GPIO1_12 0x28c 0x68c 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DATA1__UART2_RXD 0x28c 0x68c 0x9ec 0x1 0x4
-#define MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x28c 0x68c 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DATA2__GPIO1_13 0x290 0x690 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DATA2__UART2_TXD 0x290 0x690 0x000 0x1 0x0
-#define MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x290 0x690 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DATA3__GPIO1_14 0x294 0x694 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DATA3__UART2_RTS 0x294 0x694 0x9e8 0x1 0x5
-#define MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x294 0x694 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DATA4__CSPI_SS0 0x298 0x698 0x000 0x1 0x0
-#define MX51_PAD_USBH1_DATA4__GPIO1_15 0x298 0x698 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x298 0x698 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DATA5__CSPI_SS1 0x29c 0x69c 0x920 0x1 0x0
-#define MX51_PAD_USBH1_DATA5__GPIO1_16 0x29c 0x69c 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x29c 0x69c 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DATA6__CSPI_SS3 0x2a0 0x6a0 0x928 0x1 0x1
-#define MX51_PAD_USBH1_DATA6__GPIO1_17 0x2a0 0x6a0 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x2a0 0x6a0 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DATA7__ECSPI1_SS3 0x2a4 0x6a4 0x000 0x1 0x0
-#define MX51_PAD_USBH1_DATA7__ECSPI2_SS3 0x2a4 0x6a4 0x934 0x5 0x1
-#define MX51_PAD_USBH1_DATA7__GPIO1_18 0x2a4 0x6a4 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x2a4 0x6a4 0x000 0x0 0x0
-#define MX51_PAD_DI1_PIN11__DI1_PIN11 0x2a8 0x6a8 0x000 0x0 0x0
-#define MX51_PAD_DI1_PIN11__ECSPI1_SS2 0x2a8 0x6a8 0x000 0x7 0x0
-#define MX51_PAD_DI1_PIN11__GPIO3_0 0x2a8 0x6a8 0x000 0x4 0x0
-#define MX51_PAD_DI1_PIN12__DI1_PIN12 0x2ac 0x6ac 0x000 0x0 0x0
-#define MX51_PAD_DI1_PIN12__GPIO3_1 0x2ac 0x6ac 0x978 0x4 0x1
-#define MX51_PAD_DI1_PIN13__DI1_PIN13 0x2b0 0x6b0 0x000 0x0 0x0
-#define MX51_PAD_DI1_PIN13__GPIO3_2 0x2b0 0x6b0 0x97c 0x4 0x1
-#define MX51_PAD_DI1_D0_CS__DI1_D0_CS 0x2b4 0x6b4 0x000 0x0 0x0
-#define MX51_PAD_DI1_D0_CS__GPIO3_3 0x2b4 0x6b4 0x980 0x4 0x1
-#define MX51_PAD_DI1_D1_CS__DI1_D1_CS 0x2b8 0x6b8 0x000 0x0 0x0
-#define MX51_PAD_DI1_D1_CS__DISP1_PIN14 0x2b8 0x6b8 0x000 0x2 0x0
-#define MX51_PAD_DI1_D1_CS__DISP1_PIN5 0x2b8 0x6b8 0x000 0x3 0x0
-#define MX51_PAD_DI1_D1_CS__GPIO3_4 0x2b8 0x6b8 0x984 0x4 0x1
-#define MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1 0x2bc 0x6bc 0x9a4 0x2 0x1
-#define MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN 0x2bc 0x6bc 0x9c4 0x0 0x0
-#define MX51_PAD_DISPB2_SER_DIN__GPIO3_5 0x2bc 0x6bc 0x988 0x4 0x1
-#define MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6 0x2c0 0x6c0 0x000 0x3 0x0
-#define MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO 0x2c0 0x6c0 0x9c4 0x0 0x1
-#define MX51_PAD_DISPB2_SER_DIO__GPIO3_6 0x2c0 0x6c0 0x98c 0x4 0x1
-#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17 0x2c4 0x6c4 0x000 0x2 0x0
-#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7 0x2c4 0x6c4 0x000 0x3 0x0
-#define MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK 0x2c4 0x6c4 0x000 0x0 0x0
-#define MX51_PAD_DISPB2_SER_CLK__GPIO3_7 0x2c4 0x6c4 0x990 0x4 0x1
-#define MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK 0x2c8 0x6c8 0x000 0x2 0x0
-#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN16 0x2c8 0x6c8 0x000 0x2 0x0
-#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN8 0x2c8 0x6c8 0x000 0x3 0x0
-#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS 0x2c8 0x6c8 0x000 0x0 0x0
-#define MX51_PAD_DISPB2_SER_RS__GPIO3_8 0x2c8 0x6c8 0x994 0x4 0x1
-#define MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x2cc 0x6cc 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x2d0 0x6d0 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x2d4 0x6d4 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x2d8 0x6d8 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x2dc 0x6dc 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x2e0 0x6e0 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT6__BOOT_USB_SRC 0x2e4 0x6e4 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x2e4 0x6e4 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG 0x2e8 0x6e8 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x2e8 0x6e8 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT8__BOOT_SRC0 0x2ec 0x6ec 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x2ec 0x6ec 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT9__BOOT_SRC1 0x2f0 0x6f0 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x2f0 0x6f0 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE 0x2f4 0x6f4 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x2f4 0x6f4 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2 0x2f8 0x6f8 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x2f8 0x6f8 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL 0x2fc 0x6fc 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x2fc 0x6fc 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0 0x300 0x700 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x300 0x700 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1 0x304 0x704 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x304 0x704 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH 0x308 0x708 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x308 0x708 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0 0x30c 0x70c 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x30c 0x70c 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1 0x310 0x710 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x310 0x710 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0 0x314 0x714 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x314 0x714 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT18__DISP2_PIN11 0x314 0x714 0x000 0x5 0x0
-#define MX51_PAD_DISP1_DAT18__DISP2_PIN5 0x314 0x714 0x000 0x4 0x0
-#define MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1 0x318 0x718 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x318 0x718 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT19__DISP2_PIN12 0x318 0x718 0x000 0x5 0x0
-#define MX51_PAD_DISP1_DAT19__DISP2_PIN6 0x318 0x718 0x000 0x4 0x0
-#define MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0 0x31c 0x71c 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x31c 0x71c 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT20__DISP2_PIN13 0x31c 0x71c 0x000 0x5 0x0
-#define MX51_PAD_DISP1_DAT20__DISP2_PIN7 0x31c 0x71c 0x000 0x4 0x0
-#define MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1 0x320 0x720 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x320 0x720 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT21__DISP2_PIN14 0x320 0x720 0x000 0x5 0x0
-#define MX51_PAD_DISP1_DAT21__DISP2_PIN8 0x320 0x720 0x000 0x4 0x0
-#define MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0 0x324 0x724 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x324 0x724 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT22__DISP2_D0_CS 0x324 0x724 0x000 0x6 0x0
-#define MX51_PAD_DISP1_DAT22__DISP2_DAT16 0x324 0x724 0x000 0x5 0x0
-#define MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1 0x328 0x728 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x328 0x728 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT23__DISP2_D1_CS 0x328 0x728 0x000 0x6 0x0
-#define MX51_PAD_DISP1_DAT23__DISP2_DAT17 0x328 0x728 0x000 0x5 0x0
-#define MX51_PAD_DISP1_DAT23__DISP2_SER_CS 0x328 0x728 0x000 0x4 0x0
-#define MX51_PAD_DI1_PIN3__DI1_PIN3 0x32c 0x72c 0x000 0x0 0x0
-#define MX51_PAD_DI1_PIN2__DI1_PIN2 0x330 0x734 0x000 0x0 0x0
-#define MX51_PAD_DI_GP2__DISP1_SER_CLK 0x338 0x740 0x000 0x0 0x0
-#define MX51_PAD_DI_GP2__DISP2_WAIT 0x338 0x740 0x9a8 0x2 0x1
-#define MX51_PAD_DI_GP3__CSI1_DATA_EN 0x33c 0x744 0x9a0 0x3 0x1
-#define MX51_PAD_DI_GP3__DISP1_SER_DIO 0x33c 0x744 0x9c0 0x0 0x0
-#define MX51_PAD_DI_GP3__FEC_TX_ER 0x33c 0x744 0x000 0x2 0x0
-#define MX51_PAD_DI2_PIN4__CSI2_DATA_EN 0x340 0x748 0x99c 0x3 0x1
-#define MX51_PAD_DI2_PIN4__DI2_PIN4 0x340 0x748 0x000 0x0 0x0
-#define MX51_PAD_DI2_PIN4__FEC_CRS 0x340 0x748 0x950 0x2 0x1
-#define MX51_PAD_DI2_PIN2__DI2_PIN2 0x344 0x74c 0x000 0x0 0x0
-#define MX51_PAD_DI2_PIN2__FEC_MDC 0x344 0x74c 0x000 0x2 0x0
-#define MX51_PAD_DI2_PIN3__DI2_PIN3 0x348 0x750 0x000 0x0 0x0
-#define MX51_PAD_DI2_PIN3__FEC_MDIO 0x348 0x750 0x954 0x2 0x1
-#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x34c 0x754 0x000 0x0 0x0
-#define MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x34c 0x754 0x95c 0x2 0x1
-#define MX51_PAD_DI_GP4__DI2_PIN15 0x350 0x758 0x000 0x4 0x0
-#define MX51_PAD_DI_GP4__DISP1_SER_DIN 0x350 0x758 0x9c0 0x0 0x1
-#define MX51_PAD_DI_GP4__DISP2_PIN1 0x350 0x758 0x000 0x3 0x0
-#define MX51_PAD_DI_GP4__FEC_RDATA2 0x350 0x758 0x960 0x2 0x1
-#define MX51_PAD_DISP2_DAT0__DISP2_DAT0 0x354 0x75c 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x354 0x75c 0x964 0x2 0x1
-#define MX51_PAD_DISP2_DAT0__KEY_COL6 0x354 0x75c 0x9c8 0x4 0x1
-#define MX51_PAD_DISP2_DAT0__UART3_RXD 0x354 0x75c 0x9f4 0x5 0x8
-#define MX51_PAD_DISP2_DAT0__USBH3_CLK 0x354 0x75c 0x9f8 0x3 0x1
-#define MX51_PAD_DISP2_DAT1__DISP2_DAT1 0x358 0x760 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x358 0x760 0x970 0x2 0x1
-#define MX51_PAD_DISP2_DAT1__KEY_COL7 0x358 0x760 0x9cc 0x4 0x1
-#define MX51_PAD_DISP2_DAT1__UART3_TXD 0x358 0x760 0x000 0x5 0x0
-#define MX51_PAD_DISP2_DAT1__USBH3_DIR 0x358 0x760 0xa1c 0x3 0x1
-#define MX51_PAD_DISP2_DAT2__DISP2_DAT2 0x35c 0x764 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT3__DISP2_DAT3 0x360 0x768 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT4__DISP2_DAT4 0x364 0x76c 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT5__DISP2_DAT5 0x368 0x770 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT6__DISP2_DAT6 0x36c 0x774 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x36c 0x774 0x000 0x2 0x0
-#define MX51_PAD_DISP2_DAT6__GPIO1_19 0x36c 0x774 0x000 0x5 0x0
-#define MX51_PAD_DISP2_DAT6__KEY_ROW4 0x36c 0x774 0x9d0 0x4 0x1
-#define MX51_PAD_DISP2_DAT6__USBH3_STP 0x36c 0x774 0xa24 0x3 0x1
-#define MX51_PAD_DISP2_DAT7__DISP2_DAT7 0x370 0x778 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x370 0x778 0x000 0x2 0x0
-#define MX51_PAD_DISP2_DAT7__GPIO1_29 0x370 0x778 0x000 0x5 0x0
-#define MX51_PAD_DISP2_DAT7__KEY_ROW5 0x370 0x778 0x9d4 0x4 0x1
-#define MX51_PAD_DISP2_DAT7__USBH3_NXT 0x370 0x778 0xa20 0x3 0x1
-#define MX51_PAD_DISP2_DAT8__DISP2_DAT8 0x374 0x77c 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x374 0x77c 0x000 0x2 0x0
-#define MX51_PAD_DISP2_DAT8__GPIO1_30 0x374 0x77c 0x000 0x5 0x0
-#define MX51_PAD_DISP2_DAT8__KEY_ROW6 0x374 0x77c 0x9d8 0x4 0x1
-#define MX51_PAD_DISP2_DAT8__USBH3_DATA0 0x374 0x77c 0x9fc 0x3 0x1
-#define MX51_PAD_DISP2_DAT9__AUD6_RXC 0x378 0x780 0x8f4 0x4 0x1
-#define MX51_PAD_DISP2_DAT9__DISP2_DAT9 0x378 0x780 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x378 0x780 0x000 0x2 0x0
-#define MX51_PAD_DISP2_DAT9__GPIO1_31 0x378 0x780 0x000 0x5 0x0
-#define MX51_PAD_DISP2_DAT9__USBH3_DATA1 0x378 0x780 0xa00 0x3 0x1
-#define MX51_PAD_DISP2_DAT10__DISP2_DAT10 0x37c 0x784 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT10__DISP2_SER_CS 0x37c 0x784 0x000 0x5 0x0
-#define MX51_PAD_DISP2_DAT10__FEC_COL 0x37c 0x784 0x94c 0x2 0x1
-#define MX51_PAD_DISP2_DAT10__KEY_ROW7 0x37c 0x784 0x9dc 0x4 0x1
-#define MX51_PAD_DISP2_DAT10__USBH3_DATA2 0x37c 0x784 0xa04 0x3 0x1
-#define MX51_PAD_DISP2_DAT11__AUD6_TXD 0x380 0x788 0x8f0 0x4 0x1
-#define MX51_PAD_DISP2_DAT11__DISP2_DAT11 0x380 0x788 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x380 0x788 0x968 0x2 0x1
-#define MX51_PAD_DISP2_DAT11__GPIO1_10 0x380 0x788 0x000 0x7 0x0
-#define MX51_PAD_DISP2_DAT11__USBH3_DATA3 0x380 0x788 0xa08 0x3 0x1
-#define MX51_PAD_DISP2_DAT12__AUD6_RXD 0x384 0x78c 0x8ec 0x4 0x1
-#define MX51_PAD_DISP2_DAT12__DISP2_DAT12 0x384 0x78c 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x384 0x78c 0x96c 0x2 0x1
-#define MX51_PAD_DISP2_DAT12__USBH3_DATA4 0x384 0x78c 0xa0c 0x3 0x1
-#define MX51_PAD_DISP2_DAT13__AUD6_TXC 0x388 0x790 0x8fc 0x4 0x1
-#define MX51_PAD_DISP2_DAT13__DISP2_DAT13 0x388 0x790 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x388 0x790 0x974 0x2 0x1
-#define MX51_PAD_DISP2_DAT13__USBH3_DATA5 0x388 0x790 0xa10 0x3 0x1
-#define MX51_PAD_DISP2_DAT14__AUD6_TXFS 0x38c 0x794 0x900 0x4 0x1
-#define MX51_PAD_DISP2_DAT14__DISP2_DAT14 0x38c 0x794 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x38c 0x794 0x958 0x2 0x1
-#define MX51_PAD_DISP2_DAT14__USBH3_DATA6 0x38c 0x794 0xa14 0x3 0x1
-#define MX51_PAD_DISP2_DAT15__AUD6_RXFS 0x390 0x798 0x8f8 0x4 0x1
-#define MX51_PAD_DISP2_DAT15__DISP1_SER_CS 0x390 0x798 0x000 0x5 0x0
-#define MX51_PAD_DISP2_DAT15__DISP2_DAT15 0x390 0x798 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x390 0x798 0x000 0x2 0x0
-#define MX51_PAD_DISP2_DAT15__USBH3_DATA7 0x390 0x798 0xa18 0x3 0x1
-#define MX51_PAD_SD1_CMD__AUD5_RXFS 0x394 0x79c 0x8e0 0x1 0x1
-#define MX51_PAD_SD1_CMD__CSPI_MOSI 0x394 0x79c 0x91c 0x2 0x2
-#define MX51_PAD_SD1_CMD__SD1_CMD 0x394 0x79c 0x000 0x0 0x0
-#define MX51_PAD_SD1_CLK__AUD5_RXC 0x398 0x7a0 0x8dc 0x1 0x1
-#define MX51_PAD_SD1_CLK__CSPI_SCLK 0x398 0x7a0 0x914 0x2 0x2
-#define MX51_PAD_SD1_CLK__SD1_CLK 0x398 0x7a0 0x000 0x0 0x0
-#define MX51_PAD_SD1_DATA0__AUD5_TXD 0x39c 0x7a4 0x8d8 0x1 0x2
-#define MX51_PAD_SD1_DATA0__CSPI_MISO 0x39c 0x7a4 0x918 0x2 0x1
-#define MX51_PAD_SD1_DATA0__SD1_DATA0 0x39c 0x7a4 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA0__EIM_DA0 0x01c 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA1__EIM_DA1 0x020 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA2__EIM_DA2 0x024 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA3__EIM_DA3 0x028 0x000 0x000 0x0 0x0
-#define MX51_PAD_SD1_DATA1__AUD5_RXD 0x3a0 0x7a8 0x8d4 0x1 0x2
-#define MX51_PAD_SD1_DATA1__SD1_DATA1 0x3a0 0x7a8 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA4__EIM_DA4 0x02c 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA5__EIM_DA5 0x030 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA6__EIM_DA6 0x034 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA7__EIM_DA7 0x038 0x000 0x000 0x0 0x0
-#define MX51_PAD_SD1_DATA2__AUD5_TXC 0x3a4 0x7ac 0x8e4 0x1 0x2
-#define MX51_PAD_SD1_DATA2__SD1_DATA2 0x3a4 0x7ac 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA10__EIM_DA10 0x044 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA11__EIM_DA11 0x048 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA8__EIM_DA8 0x03c 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA9__EIM_DA9 0x040 0x000 0x000 0x0 0x0
-#define MX51_PAD_SD1_DATA3__AUD5_TXFS 0x3a8 0x7b0 0x8e8 0x1 0x2
-#define MX51_PAD_SD1_DATA3__CSPI_SS1 0x3a8 0x7b0 0x920 0x2 0x1
-#define MX51_PAD_SD1_DATA3__SD1_DATA3 0x3a8 0x7b0 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_0__CSPI_SS2 0x3ac 0x7b4 0x924 0x2 0x0
-#define MX51_PAD_GPIO1_0__GPIO1_0 0x3ac 0x7b4 0x000 0x1 0x0
-#define MX51_PAD_GPIO1_0__SD1_CD 0x3ac 0x7b4 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_1__CSPI_MISO 0x3b0 0x7b8 0x918 0x2 0x2
-#define MX51_PAD_GPIO1_1__GPIO1_1 0x3b0 0x7b8 0x000 0x1 0x0
-#define MX51_PAD_GPIO1_1__SD1_WP 0x3b0 0x7b8 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA12__EIM_DA12 0x04c 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA13__EIM_DA13 0x050 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA14__EIM_DA14 0x054 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA15__EIM_DA15 0x058 0x000 0x000 0x0 0x0
-#define MX51_PAD_SD2_CMD__CSPI_MOSI 0x3b4 0x7bc 0x91c 0x2 0x3
-#define MX51_PAD_SD2_CMD__I2C1_SCL 0x3b4 0x7bc 0x9b0 0x1 0x2
-#define MX51_PAD_SD2_CMD__SD2_CMD 0x3b4 0x7bc 0x000 0x0 0x0
-#define MX51_PAD_SD2_CLK__CSPI_SCLK 0x3b8 0x7c0 0x914 0x2 0x3
-#define MX51_PAD_SD2_CLK__I2C1_SDA 0x3b8 0x7c0 0x9b4 0x1 0x2
-#define MX51_PAD_SD2_CLK__SD2_CLK 0x3b8 0x7c0 0x000 0x0 0x0
-#define MX51_PAD_SD2_DATA0__CSPI_MISO 0x3bc 0x7c4 0x918 0x2 0x3
-#define MX51_PAD_SD2_DATA0__SD1_DAT4 0x3bc 0x7c4 0x000 0x1 0x0
-#define MX51_PAD_SD2_DATA0__SD2_DATA0 0x3bc 0x7c4 0x000 0x0 0x0
-#define MX51_PAD_SD2_DATA1__SD1_DAT5 0x3c0 0x7c8 0x000 0x1 0x0
-#define MX51_PAD_SD2_DATA1__SD2_DATA1 0x3c0 0x7c8 0x000 0x0 0x0
-#define MX51_PAD_SD2_DATA1__USBH3_H2_DP 0x3c0 0x7c8 0x000 0x2 0x0
-#define MX51_PAD_SD2_DATA2__SD1_DAT6 0x3c4 0x7cc 0x000 0x1 0x0
-#define MX51_PAD_SD2_DATA2__SD2_DATA2 0x3c4 0x7cc 0x000 0x0 0x0
-#define MX51_PAD_SD2_DATA2__USBH3_H2_DM 0x3c4 0x7cc 0x000 0x2 0x0
-#define MX51_PAD_SD2_DATA3__CSPI_SS2 0x3c8 0x7d0 0x924 0x2 0x1
-#define MX51_PAD_SD2_DATA3__SD1_DAT7 0x3c8 0x7d0 0x000 0x1 0x0
-#define MX51_PAD_SD2_DATA3__SD2_DATA3 0x3c8 0x7d0 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_2__CCM_OUT_2 0x3cc 0x7d4 0x000 0x5 0x0
-#define MX51_PAD_GPIO1_2__GPIO1_2 0x3cc 0x7d4 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_2__I2C2_SCL 0x3cc 0x7d4 0x9b8 0x2 0x3
-#define MX51_PAD_GPIO1_2__PLL1_BYP 0x3cc 0x7d4 0x90c 0x7 0x1
-#define MX51_PAD_GPIO1_2__PWM1_PWMO 0x3cc 0x7d4 0x000 0x1 0x0
-#define MX51_PAD_GPIO1_3__GPIO1_3 0x3d0 0x7d8 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_3__I2C2_SDA 0x3d0 0x7d8 0x9bc 0x2 0x3
-#define MX51_PAD_GPIO1_3__PLL2_BYP 0x3d0 0x7d8 0x910 0x7 0x1
-#define MX51_PAD_GPIO1_3__PWM2_PWMO 0x3d0 0x7d8 0x000 0x1 0x0
-#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ 0x3d4 0x7fc 0x000 0x0 0x0
-#define MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B 0x3d4 0x7fc 0x000 0x1 0x0
-#define MX51_PAD_GPIO1_4__DISP2_EXT_CLK 0x3d8 0x804 0x908 0x4 0x1
-#define MX51_PAD_GPIO1_4__EIM_RDY 0x3d8 0x804 0x938 0x3 0x1
-#define MX51_PAD_GPIO1_4__GPIO1_4 0x3d8 0x804 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_4__WDOG1_WDOG_B 0x3d8 0x804 0x000 0x2 0x0
-#define MX51_PAD_GPIO1_5__CSI2_MCLK 0x3dc 0x808 0x000 0x6 0x0
-#define MX51_PAD_GPIO1_5__DISP2_PIN16 0x3dc 0x808 0x000 0x3 0x0
-#define MX51_PAD_GPIO1_5__GPIO1_5 0x3dc 0x808 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_5__WDOG2_WDOG_B 0x3dc 0x808 0x000 0x2 0x0
-#define MX51_PAD_GPIO1_6__DISP2_PIN17 0x3e0 0x80c 0x000 0x4 0x0
-#define MX51_PAD_GPIO1_6__GPIO1_6 0x3e0 0x80c 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_6__REF_EN_B 0x3e0 0x80c 0x000 0x3 0x0
-#define MX51_PAD_GPIO1_7__CCM_OUT_0 0x3e4 0x810 0x000 0x3 0x0
-#define MX51_PAD_GPIO1_7__GPIO1_7 0x3e4 0x810 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_7__SD2_WP 0x3e4 0x810 0x000 0x6 0x0
-#define MX51_PAD_GPIO1_7__SPDIF_OUT1 0x3e4 0x810 0x000 0x2 0x0
-#define MX51_PAD_GPIO1_8__CSI2_DATA_EN 0x3e8 0x814 0x99c 0x2 0x2
-#define MX51_PAD_GPIO1_8__GPIO1_8 0x3e8 0x814 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_8__SD2_CD 0x3e8 0x814 0x000 0x6 0x0
-#define MX51_PAD_GPIO1_8__USBH3_PWR 0x3e8 0x814 0x000 0x1 0x0
-#define MX51_PAD_GPIO1_9__CCM_OUT_1 0x3ec 0x818 0x000 0x3 0x0
-#define MX51_PAD_GPIO1_9__DISP2_D1_CS 0x3ec 0x818 0x000 0x2 0x0
-#define MX51_PAD_GPIO1_9__DISP2_SER_CS 0x3ec 0x818 0x000 0x7 0x0
-#define MX51_PAD_GPIO1_9__GPIO1_9 0x3ec 0x818 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_9__SD2_LCTL 0x3ec 0x818 0x000 0x6 0x0
-#define MX51_PAD_GPIO1_9__USBH3_OC 0x3ec 0x818 0x000 0x1 0x0
-
-#endif /* __DTS_IMX51_PINFUNC_H */
diff --git a/arch/arm/dts/imx51-pingrp.h b/arch/arm/dts/imx51-pingrp.h
deleted file mode 100644
index f63267b..0000000
--- a/arch/arm/dts/imx51-pingrp.h
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * Copyright (C) 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __DTS_IMX51_PINGRP_H
-#define __DTS_IMX51_PINGRP_H
-
-#include "imx51-pinfunc.h"
-
-#define MX51_AUDMUX_PINGRP1 \
- MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000 \
- MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x80000000 \
- MX51_PAD_AUD3_BB_CK__AUD3_TXC 0x80000000 \
- MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x80000000
-
-#define MX51_FEC_PINGRP1 \
- MX51_PAD_EIM_EB2__FEC_MDIO 0x80000000 \
- MX51_PAD_EIM_EB3__FEC_RDATA1 0x80000000 \
- MX51_PAD_EIM_CS2__FEC_RDATA2 0x80000000 \
- MX51_PAD_EIM_CS3__FEC_RDATA3 0x80000000 \
- MX51_PAD_EIM_CS4__FEC_RX_ER 0x80000000 \
- MX51_PAD_EIM_CS5__FEC_CRS 0x80000000 \
- MX51_PAD_NANDF_RB2__FEC_COL 0x80000000 \
- MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x80000000 \
- MX51_PAD_NANDF_D9__FEC_RDATA0 0x80000000 \
- MX51_PAD_NANDF_D8__FEC_TDATA0 0x80000000 \
- MX51_PAD_NANDF_CS2__FEC_TX_ER 0x80000000 \
- MX51_PAD_NANDF_CS3__FEC_MDC 0x80000000 \
- MX51_PAD_NANDF_CS4__FEC_TDATA1 0x80000000 \
- MX51_PAD_NANDF_CS5__FEC_TDATA2 0x80000000 \
- MX51_PAD_NANDF_CS6__FEC_TDATA3 0x80000000 \
- MX51_PAD_NANDF_CS7__FEC_TX_EN 0x80000000 \
- MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x80000000
-
-#define MX51_FEC_PINGRP2 \
- MX51_PAD_DI_GP3__FEC_TX_ER 0x80000000 \
- MX51_PAD_DI2_PIN4__FEC_CRS 0x80000000 \
- MX51_PAD_DI2_PIN2__FEC_MDC 0x80000000 \
- MX51_PAD_DI2_PIN3__FEC_MDIO 0x80000000 \
- MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x80000000 \
- MX51_PAD_DI_GP4__FEC_RDATA2 0x80000000 \
- MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x80000000 \
- MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x80000000 \
- MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x80000000 \
- MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x80000000 \
- MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x80000000 \
- MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x80000000 \
- MX51_PAD_DISP2_DAT10__FEC_COL 0x80000000 \
- MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x80000000 \
- MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x80000000 \
- MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x80000000 \
- MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x80000000 \
- MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x80000000
-
-#define MX51_ECSPI1_PINGRP1 \
- MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 \
- MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 \
- MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
-
-#define MX51_ECSPI2_PINGRP1 \
- MX51_PAD_NANDF_RB3__ECSPI2_MISO 0x185 \
- MX51_PAD_NANDF_D15__ECSPI2_MOSI 0x185 \
- MX51_PAD_NANDF_RB2__ECSPI2_SCLK 0x185
-
-#define MX51_ESDHC1_PINGRP1 \
- MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 \
- MX51_PAD_SD1_CLK__SD1_CLK 0x20d5 \
- MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5 \
- MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 \
- MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 \
- MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
-
-#define MX51_ESDHC2_PINGRP1 \
- MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5 \
- MX51_PAD_SD2_CLK__SD2_CLK 0x20d5 \
- MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5 \
- MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5 \
- MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5 \
- MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5
-
-#define MX51_I2C1_PINGRP1 \
- MX51_PAD_SD2_CMD__I2C1_SCL 0x400001ed \
- MX51_PAD_SD2_CLK__I2C1_SDA 0x400001ed
-
-#define MX51_I2C2_PINGRP1 \
- MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed \
- MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed
-
-#define MX51_I2C2_PINGRP2 \
- MX51_PAD_EIM_D27__I2C2_SCL 0x400001ed \
- MX51_PAD_EIM_D24__I2C2_SDA 0x400001ed
-
-#define MX51_I2C2_PINGRP3 \
- MX51_PAD_GPIO1_2__I2C2_SCL 0x400001ed \
- MX51_PAD_GPIO1_3__I2C2_SDA 0x400001ed
-
-#define MX51_IPU_DISP1_PINGRP1 \
- MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5 \
- MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5 \
- MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5 \
- MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5 \
- MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5 \
- MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5 \
- MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5 \
- MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5 \
- MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5 \
- MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5 \
- MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5 \
- MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5 \
- MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5 \
- MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5 \
- MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5 \
- MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5 \
- MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5 \
- MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5 \
- MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5 \
- MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5 \
- MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5 \
- MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5 \
- MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5 \
- MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5 \
- MX51_PAD_DI1_PIN2__DI1_PIN2 0x5 \
- MX51_PAD_DI1_PIN3__DI1_PIN3 0x5
-
-#define MX51_IPU_DISP2_PINGRP1 \
- MX51_PAD_DISP2_DAT0__DISP2_DAT0 0x5 \
- MX51_PAD_DISP2_DAT1__DISP2_DAT1 0x5 \
- MX51_PAD_DISP2_DAT2__DISP2_DAT2 0x5 \
- MX51_PAD_DISP2_DAT3__DISP2_DAT3 0x5 \
- MX51_PAD_DISP2_DAT4__DISP2_DAT4 0x5 \
- MX51_PAD_DISP2_DAT5__DISP2_DAT5 0x5 \
- MX51_PAD_DISP2_DAT6__DISP2_DAT6 0x5 \
- MX51_PAD_DISP2_DAT7__DISP2_DAT7 0x5 \
- MX51_PAD_DISP2_DAT8__DISP2_DAT8 0x5 \
- MX51_PAD_DISP2_DAT9__DISP2_DAT9 0x5 \
- MX51_PAD_DISP2_DAT10__DISP2_DAT10 0x5 \
- MX51_PAD_DISP2_DAT11__DISP2_DAT11 0x5 \
- MX51_PAD_DISP2_DAT12__DISP2_DAT12 0x5 \
- MX51_PAD_DISP2_DAT13__DISP2_DAT13 0x5 \
- MX51_PAD_DISP2_DAT14__DISP2_DAT14 0x5 \
- MX51_PAD_DISP2_DAT15__DISP2_DAT15 0x5 \
- MX51_PAD_DI2_PIN2__DI2_PIN2 0x5 \
- MX51_PAD_DI2_PIN3__DI2_PIN3 0x5 \
- MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x5 \
- MX51_PAD_DI_GP4__DI2_PIN15 0x5
-
-#define MX51_KPP_PINGRP1 \
- MX51_PAD_KEY_ROW0__KEY_ROW0 0xe0 \
- MX51_PAD_KEY_ROW1__KEY_ROW1 0xe0 \
- MX51_PAD_KEY_ROW2__KEY_ROW2 0xe0 \
- MX51_PAD_KEY_ROW3__KEY_ROW3 0xe0 \
- MX51_PAD_KEY_COL0__KEY_COL0 0xe8 \
- MX51_PAD_KEY_COL1__KEY_COL1 0xe8 \
- MX51_PAD_KEY_COL2__KEY_COL2 0xe8 \
- MX51_PAD_KEY_COL3__KEY_COL3 0xe8
-
-#define MX51_PATA_PINGRP1 \
- MX51_PAD_NANDF_WE_B__PATA_DIOW 0x2004 \
- MX51_PAD_NANDF_RE_B__PATA_DIOR 0x2004 \
- MX51_PAD_NANDF_ALE__PATA_BUFFER_EN 0x2004 \
- MX51_PAD_NANDF_CLE__PATA_RESET_B 0x2004 \
- MX51_PAD_NANDF_WP_B__PATA_DMACK 0x2004 \
- MX51_PAD_NANDF_RB0__PATA_DMARQ 0x2004 \
- MX51_PAD_NANDF_RB1__PATA_IORDY 0x2004 \
- MX51_PAD_GPIO_NAND__PATA_INTRQ 0x2004 \
- MX51_PAD_NANDF_CS2__PATA_CS_0 0x2004 \
- MX51_PAD_NANDF_CS3__PATA_CS_1 0x2004 \
- MX51_PAD_NANDF_CS4__PATA_DA_0 0x2004 \
- MX51_PAD_NANDF_CS5__PATA_DA_1 0x2004 \
- MX51_PAD_NANDF_CS6__PATA_DA_2 0x2004 \
- MX51_PAD_NANDF_D15__PATA_DATA15 0x2004 \
- MX51_PAD_NANDF_D14__PATA_DATA14 0x2004 \
- MX51_PAD_NANDF_D13__PATA_DATA13 0x2004 \
- MX51_PAD_NANDF_D12__PATA_DATA12 0x2004 \
- MX51_PAD_NANDF_D11__PATA_DATA11 0x2004 \
- MX51_PAD_NANDF_D10__PATA_DATA10 0x2004 \
- MX51_PAD_NANDF_D9__PATA_DATA9 0x2004 \
- MX51_PAD_NANDF_D8__PATA_DATA8 0x2004 \
- MX51_PAD_NANDF_D7__PATA_DATA7 0x2004 \
- MX51_PAD_NANDF_D6__PATA_DATA6 0x2004 \
- MX51_PAD_NANDF_D5__PATA_DATA5 0x2004 \
- MX51_PAD_NANDF_D4__PATA_DATA4 0x2004 \
- MX51_PAD_NANDF_D3__PATA_DATA3 0x2004 \
- MX51_PAD_NANDF_D2__PATA_DATA2 0x2004 \
- MX51_PAD_NANDF_D1__PATA_DATA1 0x2004 \
- MX51_PAD_NANDF_D0__PATA_DATA0 0x2004
-
-#define MX51_UART1_PINGRP1 \
- MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 \
- MX51_PAD_UART1_TXD__UART1_TXD 0x1c5
-
-#define MX51_UART1_RTSCTS_PINGRP1 \
- MX51_PAD_UART1_RTS__UART1_RTS 0x1c5 \
- MX51_PAD_UART1_CTS__UART1_CTS 0x1c5
-
-#define MX51_UART2_PINGRP1 \
- MX51_PAD_UART2_RXD__UART2_RXD 0x1c5 \
- MX51_PAD_UART2_TXD__UART2_TXD 0x1c5
-
-#define MX51_UART3_PINGRP1 \
- MX51_PAD_EIM_D25__UART3_RXD 0x1c5 \
- MX51_PAD_EIM_D26__UART3_TXD 0x1c5
-
-#define MX51_UART3_RTSCTS_PINGRP1 \
- MX51_PAD_EIM_D27__UART3_RTS 0x1c5 \
- MX51_PAD_EIM_D24__UART3_CTS 0x1c5
-
-#define MX51_UART3_PINGRP2 \
- MX51_PAD_UART3_RXD__UART3_RXD 0x1c5 \
- MX51_PAD_UART3_TXD__UART3_TXD 0x1c5
-
-#define MX51_UART3_RTSCTS_PINGRP2 \
- MX51_PAD_KEY_COL4__UART3_RTS 0x1c5 \
- MX51_PAD_KEY_COL5__UART3_CTS 0x1c5
-
-#define MX51_USBH1_PINGRP1 \
- MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5 \
- MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5 \
- MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5 \
- MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5 \
- MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5 \
- MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5 \
- MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5 \
- MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5 \
- MX51_PAD_USBH1_CLK__USBH1_CLK 0x1e5 \
- MX51_PAD_USBH1_DIR__USBH1_DIR 0x1e5 \
- MX51_PAD_USBH1_NXT__USBH1_NXT 0x1e5 \
- MX51_PAD_USBH1_STP__USBH1_STP 0x1e5
-
-#define MX51_USBH2_PINGRP1 \
- MX51_PAD_EIM_D16__USBH2_DATA0 0x1e5 \
- MX51_PAD_EIM_D17__USBH2_DATA1 0x1e5 \
- MX51_PAD_EIM_D18__USBH2_DATA2 0x1e5 \
- MX51_PAD_EIM_D19__USBH2_DATA3 0x1e5 \
- MX51_PAD_EIM_D20__USBH2_DATA4 0x1e5 \
- MX51_PAD_EIM_D21__USBH2_DATA5 0x1e5 \
- MX51_PAD_EIM_D22__USBH2_DATA6 0x1e5 \
- MX51_PAD_EIM_D23__USBH2_DATA7 0x1e5 \
- MX51_PAD_EIM_A24__USBH2_CLK 0x1e5 \
- MX51_PAD_EIM_A25__USBH2_DIR 0x1e5 \
- MX51_PAD_EIM_A27__USBH2_NXT 0x1e5 \
- MX51_PAD_EIM_A26__USBH2_STP 0x1e5
-
-#endif /* __DTS_IMX51_PINGRP_H */
diff --git a/arch/arm/dts/imx51.dtsi b/arch/arm/dts/imx51.dtsi
deleted file mode 100644
index 61a2552..0000000
--- a/arch/arm/dts/imx51.dtsi
+++ /dev/null
@@ -1,551 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "skeleton.dtsi"
-#include "imx51-pingrp.h"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clock/imx5-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- aliases {
- gpio0 = &gpio1;
- gpio1 = &gpio2;
- gpio2 = &gpio3;
- gpio3 = &gpio4;
- i2c0 = &i2c1;
- i2c1 = &i2c2;
- serial0 = &uart1;
- serial1 = &uart2;
- serial2 = &uart3;
- spi0 = &ecspi1;
- spi1 = &ecspi2;
- spi2 = &cspi;
- };
-
- tzic: tz-interrupt-controller@e0000000 {
- compatible = "fsl,imx51-tzic", "fsl,tzic";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0xe0000000 0x4000>;
- };
-
- clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ckil {
- compatible = "fsl,imx-ckil", "fixed-clock";
- clock-frequency = <32768>;
- };
-
- ckih1 {
- compatible = "fsl,imx-ckih1", "fixed-clock";
- clock-frequency = <0>;
- };
-
- ckih2 {
- compatible = "fsl,imx-ckih2", "fixed-clock";
- clock-frequency = <0>;
- };
-
- osc {
- compatible = "fsl,imx-osc", "fixed-clock";
- clock-frequency = <24000000>;
- };
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
- cpu: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a8";
- reg = <0>;
- clock-latency = <62500>;
- clocks = <&clks IMX5_CLK_CPU_PODF>;
- clock-names = "cpu";
- operating-points = <
- 166000 1000000
- 600000 1050000
- 800000 1100000
- >;
- voltage-tolerance = <5>;
- };
- };
-
- usbphy {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "simple-bus";
-
- usbphy0: usbphy@0 {
- compatible = "usb-nop-xceiv";
- reg = <0>;
- clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
- clock-names = "main_clk";
- };
- };
-
- soc {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- interrupt-parent = <&tzic>;
- ranges;
-
- iram: iram@1ffe0000 {
- compatible = "mmio-sram";
- reg = <0x1ffe0000 0x20000>;
- };
-
- ipu: ipu@40000000 {
- #crtc-cells = <1>;
- compatible = "fsl,imx51-ipu";
- reg = <0x40000000 0x20000000>;
- interrupts = <11 10>;
- clocks = <&clks IMX5_CLK_IPU_GATE>,
- <&clks IMX5_CLK_IPU_DI0_GATE>,
- <&clks IMX5_CLK_IPU_DI1_GATE>;
- clock-names = "bus", "di0", "di1";
- resets = <&src 2>;
- };
-
- aips@70000000 { /* AIPS1 */
- compatible = "fsl,aips-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x70000000 0x10000000>;
- ranges;
-
- spba@70000000 {
- compatible = "fsl,spba-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x70000000 0x40000>;
- ranges;
-
- esdhc1: esdhc@70004000 {
- compatible = "fsl,imx51-esdhc";
- reg = <0x70004000 0x4000>;
- interrupts = <1>;
- clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
- <&clks IMX5_CLK_DUMMY>,
- <&clks IMX5_CLK_ESDHC1_PER_GATE>;
- clock-names = "ipg", "ahb", "per";
- status = "disabled";
- };
-
- esdhc2: esdhc@70008000 {
- compatible = "fsl,imx51-esdhc";
- reg = <0x70008000 0x4000>;
- interrupts = <2>;
- clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
- <&clks IMX5_CLK_DUMMY>,
- <&clks IMX5_CLK_ESDHC2_PER_GATE>;
- clock-names = "ipg", "ahb", "per";
- bus-width = <4>;
- status = "disabled";
- };
-
- uart3: serial@7000c000 {
- compatible = "fsl,imx51-uart", "fsl,imx21-uart";
- reg = <0x7000c000 0x4000>;
- interrupts = <33>;
- clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
- <&clks IMX5_CLK_UART3_PER_GATE>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- ecspi1: ecspi@70010000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx51-ecspi";
- reg = <0x70010000 0x4000>;
- interrupts = <36>;
- clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
- <&clks IMX5_CLK_ECSPI1_PER_GATE>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- ssi2: ssi@70014000 {
- compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
- reg = <0x70014000 0x4000>;
- interrupts = <30>;
- clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>;
- dmas = <&sdma 24 22 0>,
- <&sdma 25 22 0>;
- dma-names = "rx", "tx";
- fsl,fifo-depth = <15>;
- fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
- status = "disabled";
- };
-
- esdhc3: esdhc@70020000 {
- compatible = "fsl,imx51-esdhc";
- reg = <0x70020000 0x4000>;
- interrupts = <3>;
- clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
- <&clks IMX5_CLK_DUMMY>,
- <&clks IMX5_CLK_ESDHC3_PER_GATE>;
- clock-names = "ipg", "ahb", "per";
- bus-width = <4>;
- status = "disabled";
- };
-
- esdhc4: esdhc@70024000 {
- compatible = "fsl,imx51-esdhc";
- reg = <0x70024000 0x4000>;
- interrupts = <4>;
- clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
- <&clks IMX5_CLK_DUMMY>,
- <&clks IMX5_CLK_ESDHC4_PER_GATE>;
- clock-names = "ipg", "ahb", "per";
- bus-width = <4>;
- status = "disabled";
- };
- };
-
- usbotg: usb@73f80000 {
- compatible = "fsl,imx51-usb", "fsl,imx27-usb";
- reg = <0x73f80000 0x0200>;
- interrupts = <18>;
- clocks = <&clks IMX5_CLK_USBOH3_GATE>;
- fsl,usbmisc = <&usbmisc 0>;
- fsl,usbphy = <&usbphy0>;
- status = "disabled";
- };
-
- usbh1: usb@73f80200 {
- compatible = "fsl,imx51-usb", "fsl,imx27-usb";
- reg = <0x73f80200 0x0200>;
- interrupts = <14>;
- clocks = <&clks IMX5_CLK_USBOH3_GATE>;
- fsl,usbmisc = <&usbmisc 1>;
- status = "disabled";
- };
-
- usbh2: usb@73f80400 {
- compatible = "fsl,imx51-usb", "fsl,imx27-usb";
- reg = <0x73f80400 0x0200>;
- interrupts = <16>;
- clocks = <&clks IMX5_CLK_USBOH3_GATE>;
- fsl,usbmisc = <&usbmisc 2>;
- status = "disabled";
- };
-
- usbh3: usb@73f80600 {
- compatible = "fsl,imx51-usb", "fsl,imx27-usb";
- reg = <0x73f80600 0x0200>;
- interrupts = <17>;
- clocks = <&clks IMX5_CLK_USBOH3_GATE>;
- fsl,usbmisc = <&usbmisc 3>;
- status = "disabled";
- };
-
- usbmisc: usbmisc@73f80800 {
- #index-cells = <1>;
- compatible = "fsl,imx51-usbmisc";
- reg = <0x73f80800 0x200>;
- clocks = <&clks IMX5_CLK_USBOH3_GATE>;
- };
-
- gpio1: gpio@73f84000 {
- compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
- reg = <0x73f84000 0x4000>;
- interrupts = <50 51>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio2: gpio@73f88000 {
- compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
- reg = <0x73f88000 0x4000>;
- interrupts = <52 53>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio3: gpio@73f8c000 {
- compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
- reg = <0x73f8c000 0x4000>;
- interrupts = <54 55>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio4: gpio@73f90000 {
- compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
- reg = <0x73f90000 0x4000>;
- interrupts = <56 57>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- kpp: kpp@73f94000 {
- compatible = "fsl,imx51-kpp", "fsl,imx21-kpp";
- reg = <0x73f94000 0x4000>;
- interrupts = <60>;
- clocks = <&clks IMX5_CLK_DUMMY>;
- status = "disabled";
- };
-
- wdog1: wdog@73f98000 {
- compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
- reg = <0x73f98000 0x4000>;
- interrupts = <58>;
- clocks = <&clks IMX5_CLK_DUMMY>;
- };
-
- wdog2: wdog@73f9c000 {
- compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
- reg = <0x73f9c000 0x4000>;
- interrupts = <59>;
- clocks = <&clks IMX5_CLK_DUMMY>;
- status = "disabled";
- };
-
- gpt: timer@73fa0000 {
- compatible = "fsl,imx51-gpt", "fsl,imx31-gpt";
- reg = <0x73fa0000 0x4000>;
- interrupts = <39>;
- clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
- <&clks IMX5_CLK_GPT_HF_GATE>;
- clock-names = "ipg", "per";
- };
-
- iomuxc: iomuxc@73fa8000 {
- compatible = "fsl,imx51-iomuxc";
- reg = <0x73fa8000 0x4000>;
- };
-
- pwm1: pwm@73fb4000 {
- #pwm-cells = <2>;
- compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
- reg = <0x73fb4000 0x4000>;
- clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
- <&clks IMX5_CLK_PWM1_HF_GATE>;
- clock-names = "ipg", "per";
- interrupts = <61>;
- };
-
- pwm2: pwm@73fb8000 {
- #pwm-cells = <2>;
- compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
- reg = <0x73fb8000 0x4000>;
- clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
- <&clks IMX5_CLK_PWM2_HF_GATE>;
- clock-names = "ipg", "per";
- interrupts = <94>;
- };
-
- uart1: serial@73fbc000 {
- compatible = "fsl,imx51-uart", "fsl,imx21-uart";
- reg = <0x73fbc000 0x4000>;
- interrupts = <31>;
- clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
- <&clks IMX5_CLK_UART1_PER_GATE>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- uart2: serial@73fc0000 {
- compatible = "fsl,imx51-uart", "fsl,imx21-uart";
- reg = <0x73fc0000 0x4000>;
- interrupts = <32>;
- clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
- <&clks IMX5_CLK_UART2_PER_GATE>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- src: src@73fd0000 {
- compatible = "fsl,imx51-src";
- reg = <0x73fd0000 0x4000>;
- #reset-cells = <1>;
- };
-
- clks: ccm@73fd4000{
- compatible = "fsl,imx51-ccm";
- reg = <0x73fd4000 0x4000>;
- interrupts = <0 71 0x04 0 72 0x04>;
- #clock-cells = <1>;
- };
- };
-
- aips@80000000 { /* AIPS2 */
- compatible = "fsl,aips-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x80000000 0x10000000>;
- ranges;
-
- iim: iim@83f98000 {
- compatible = "fsl,imx51-iim", "fsl,imx27-iim";
- reg = <0x83f98000 0x4000>;
- interrupts = <69>;
- clocks = <&clks IMX5_CLK_IIM_GATE>;
- };
-
- owire: owire@83fa4000 {
- compatible = "fsl,imx51-owire", "fsl,imx21-owire";
- reg = <0x83fa4000 0x4000>;
- interrupts = <88>;
- clocks = <&clks IMX5_CLK_OWIRE_GATE>;
- status = "disabled";
- };
-
- ecspi2: ecspi@83fac000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx51-ecspi";
- reg = <0x83fac000 0x4000>;
- interrupts = <37>;
- clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
- <&clks IMX5_CLK_ECSPI2_PER_GATE>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- sdma: sdma@83fb0000 {
- compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
- reg = <0x83fb0000 0x4000>;
- interrupts = <6>;
- clocks = <&clks IMX5_CLK_SDMA_GATE>,
- <&clks IMX5_CLK_SDMA_GATE>;
- clock-names = "ipg", "ahb";
- #dma-cells = <3>;
- fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
- };
-
- cspi: cspi@83fc0000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
- reg = <0x83fc0000 0x4000>;
- interrupts = <38>;
- clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
- <&clks IMX5_CLK_CSPI_IPG_GATE>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- i2c2: i2c@83fc4000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
- reg = <0x83fc4000 0x4000>;
- interrupts = <63>;
- clocks = <&clks IMX5_CLK_I2C2_GATE>;
- status = "disabled";
- };
-
- i2c1: i2c@83fc8000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
- reg = <0x83fc8000 0x4000>;
- interrupts = <62>;
- clocks = <&clks IMX5_CLK_I2C1_GATE>;
- status = "disabled";
- };
-
- ssi1: ssi@83fcc000 {
- compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
- reg = <0x83fcc000 0x4000>;
- interrupts = <29>;
- clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>;
- dmas = <&sdma 28 0 0>,
- <&sdma 29 0 0>;
- dma-names = "rx", "tx";
- fsl,fifo-depth = <15>;
- fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
- status = "disabled";
- };
-
- audmux: audmux@83fd0000 {
- compatible = "fsl,imx51-audmux", "fsl,imx31-audmux";
- reg = <0x83fd0000 0x4000>;
- clocks = <&clks IMX5_CLK_DUMMY>;
- clock-names = "audmux";
- status = "disabled";
- };
-
- weim: weim@83fda000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,imx51-weim";
- reg = <0x83fda000 0x1000>;
- clocks = <&clks IMX5_CLK_EMI_SLOW_GATE>;
- ranges = <
- 0 0 0xb0000000 0x08000000
- 1 0 0xb8000000 0x08000000
- 2 0 0xc0000000 0x08000000
- 3 0 0xc8000000 0x04000000
- 4 0 0xcc000000 0x02000000
- 5 0 0xce000000 0x02000000
- >;
- status = "disabled";
- };
-
- nfc: nand@83fdb000 {
- compatible = "fsl,imx51-nand";
- reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>;
- interrupts = <8>;
- clocks = <&clks IMX5_CLK_NFC_GATE>;
- status = "disabled";
- };
-
- pata: pata@83fe0000 {
- compatible = "fsl,imx51-pata", "fsl,imx27-pata";
- reg = <0x83fe0000 0x4000>;
- interrupts = <70>;
- clocks = <&clks IMX5_CLK_PATA_GATE>;
- status = "disabled";
- };
-
- ssi3: ssi@83fe8000 {
- compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
- reg = <0x83fe8000 0x4000>;
- interrupts = <96>;
- clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>;
- dmas = <&sdma 46 0 0>,
- <&sdma 47 0 0>;
- dma-names = "rx", "tx";
- fsl,fifo-depth = <15>;
- fsl,ssi-dma-events = <47 46 37 35>; /* TX0 RX0 TX1 RX1 */
- status = "disabled";
- };
-
- fec: ethernet@83fec000 {
- compatible = "fsl,imx51-fec", "fsl,imx27-fec";
- reg = <0x83fec000 0x4000>;
- interrupts = <87>;
- clocks = <&clks IMX5_CLK_FEC_GATE>,
- <&clks IMX5_CLK_FEC_GATE>,
- <&clks IMX5_CLK_FEC_GATE>;
- clock-names = "ipg", "ahb", "ptp";
- status = "disabled";
- };
- };
- };
-};
--
1.9.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 06/12] ARM: i.MX6: Use upstream dtsi files
2014-04-28 7:45 [PATCH] Add Linux dts files and use them Sascha Hauer
` (3 preceding siblings ...)
2014-04-28 7:45 ` [PATCH 05/12] ARM: dts: i.MX51: Use upstream dts files Sascha Hauer
@ 2014-04-28 7:45 ` Sascha Hauer
2014-04-28 7:45 ` [PATCH 07/12] ARM: i.MX53: " Sascha Hauer
` (6 subsequent siblings)
11 siblings, 0 replies; 23+ messages in thread
From: Sascha Hauer @ 2014-04-28 7:45 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/dts/imx6dl-pinfunc.h | 1091 -----------------------------------------
arch/arm/dts/imx6dl.dtsi | 112 +----
arch/arm/dts/imx6q-pinfunc.h | 1047 ---------------------------------------
arch/arm/dts/imx6q.dtsi | 174 +------
arch/arm/dts/imx6qdl.dtsi | 951 +----------------------------------
5 files changed, 3 insertions(+), 3372 deletions(-)
delete mode 100644 arch/arm/dts/imx6dl-pinfunc.h
delete mode 100644 arch/arm/dts/imx6q-pinfunc.h
diff --git a/arch/arm/dts/imx6dl-pinfunc.h b/arch/arm/dts/imx6dl-pinfunc.h
deleted file mode 100644
index 0ead323..0000000
--- a/arch/arm/dts/imx6dl-pinfunc.h
+++ /dev/null
@@ -1,1091 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __DTS_IMX6DL_PINFUNC_H
-#define __DTS_IMX6DL_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-#define MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 0x04c 0x360 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT10__AUD3_RXC 0x04c 0x360 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO 0x04c 0x360 0x7f8 0x2 0x0
-#define MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x04c 0x360 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x04c 0x360 0x8fc 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28 0x04c 0x360 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07 0x04c 0x360 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 0x050 0x364 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT11__AUD3_RXFS 0x050 0x364 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT11__ECSPI2_SS0 0x050 0x364 0x800 0x2 0x0
-#define MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x050 0x364 0x8fc 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x050 0x364 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x050 0x364 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08 0x050 0x364 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x054 0x368 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x054 0x368 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x054 0x368 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT12__UART4_RX_DATA 0x054 0x368 0x914 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x054 0x368 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09 0x054 0x368 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x058 0x36c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x058 0x36c 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x058 0x36c 0x914 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT13__UART4_TX_DATA 0x058 0x36c 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x058 0x36c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10 0x058 0x36c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x05c 0x370 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x05c 0x370 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x05c 0x370 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT14__UART5_RX_DATA 0x05c 0x370 0x91c 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x05c 0x370 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11 0x05c 0x370 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x060 0x374 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x060 0x374 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x060 0x374 0x91c 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT15__UART5_TX_DATA 0x060 0x374 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01 0x060 0x374 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12 0x060 0x374 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x064 0x378 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x064 0x378 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x064 0x378 0x910 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT16__UART4_CTS_B 0x064 0x378 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02 0x064 0x378 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13 0x064 0x378 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x068 0x37c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x068 0x37c 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x068 0x37c 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT17__UART4_RTS_B 0x068 0x37c 0x910 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x068 0x37c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14 0x068 0x37c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x06c 0x380 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x06c 0x380 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B 0x06c 0x380 0x918 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT18__UART5_CTS_B 0x06c 0x380 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04 0x06c 0x380 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15 0x06c 0x380 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x070 0x384 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x070 0x384 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x070 0x384 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT19__UART5_RTS_B 0x070 0x384 0x918 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x070 0x384 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04 0x074 0x388 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x074 0x388 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x074 0x388 0x7d8 0x2 0x0
-#define MX6QDL_PAD_CSI0_DAT4__KEY_COL5 0x074 0x388 0x8c0 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x074 0x388 0x000 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22 0x074 0x388 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01 0x074 0x388 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05 0x078 0x38c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x078 0x38c 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x078 0x38c 0x7e0 0x2 0x0
-#define MX6QDL_PAD_CSI0_DAT5__KEY_ROW5 0x078 0x38c 0x8cc 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x078 0x38c 0x000 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x078 0x38c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02 0x078 0x38c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06 0x07c 0x390 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x07c 0x390 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x07c 0x390 0x7dc 0x2 0x0
-#define MX6QDL_PAD_CSI0_DAT6__KEY_COL6 0x07c 0x390 0x8c4 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x07c 0x390 0x000 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24 0x07c 0x390 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03 0x07c 0x390 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07 0x080 0x394 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x080 0x394 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT7__ECSPI1_SS0 0x080 0x394 0x7e4 0x2 0x0
-#define MX6QDL_PAD_CSI0_DAT7__KEY_ROW6 0x080 0x394 0x8d0 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x080 0x394 0x000 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x080 0x394 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04 0x080 0x394 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08 0x084 0x398 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x084 0x398 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK 0x084 0x398 0x7f4 0x2 0x0
-#define MX6QDL_PAD_CSI0_DAT8__KEY_COL7 0x084 0x398 0x8c8 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x084 0x398 0x86c 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x084 0x398 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05 0x084 0x398 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09 0x088 0x39c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x088 0x39c 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI 0x088 0x39c 0x7fc 0x2 0x0
-#define MX6QDL_PAD_CSI0_DAT9__KEY_ROW7 0x088 0x39c 0x8d4 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x088 0x39c 0x868 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x088 0x39c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06 0x088 0x39c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x08c 0x3a0 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x08c 0x3a0 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x08c 0x3a0 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK 0x08c 0x3a0 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x090 0x3a4 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x090 0x3a4 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x090 0x3a4 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL 0x090 0x3a4 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x094 0x3a8 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x094 0x3a8 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO 0x094 0x3a8 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x098 0x3ac 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x098 0x3ac 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x098 0x3ac 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00 0x098 0x3ac 0x000 0x7 0x0
-#define MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x09c 0x3b0 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_DISP_CLK__LCD_CLK 0x09c 0x3b0 0x000 0x1 0x0
-#define MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x09c 0x3b0 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_DISP_CLK__LCD_WR_RWN 0x09c 0x3b0 0x000 0x8 0x0
-#define MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x0a0 0x3b4 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_PIN15__LCD_ENABLE 0x0a0 0x3b4 0x000 0x1 0x0
-#define MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x0a0 0x3b4 0x000 0x2 0x0
-#define MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x0a0 0x3b4 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_PIN15__LCD_RD_E 0x0a0 0x3b4 0x000 0x8 0x0
-#define MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x0a4 0x3b8 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_PIN2__LCD_HSYNC 0x0a4 0x3b8 0x8d8 0x1 0x0
-#define MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x0a4 0x3b8 0x000 0x2 0x0
-#define MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x0a4 0x3b8 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_PIN2__LCD_RS 0x0a4 0x3b8 0x000 0x8 0x0
-#define MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x0a8 0x3bc 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_PIN3__LCD_VSYNC 0x0a8 0x3bc 0x000 0x1 0x0
-#define MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x0a8 0x3bc 0x000 0x2 0x0
-#define MX6QDL_PAD_DI0_PIN3__GPIO4_IO19 0x0a8 0x3bc 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_PIN3__LCD_CS 0x0a8 0x3bc 0x000 0x8 0x0
-#define MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04 0x0ac 0x3c0 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_PIN4__LCD_BUSY 0x0ac 0x3c0 0x8d8 0x1 0x1
-#define MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x0ac 0x3c0 0x000 0x2 0x0
-#define MX6QDL_PAD_DI0_PIN4__SD1_WP 0x0ac 0x3c0 0x92c 0x3 0x0
-#define MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0ac 0x3c0 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_PIN4__LCD_RESET 0x0ac 0x3c0 0x000 0x8 0x0
-#define MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x0b0 0x3c4 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT0__LCD_DATA00 0x0b0 0x3c4 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x0b0 0x3c4 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x0b0 0x3c4 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x0b4 0x3c8 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT1__LCD_DATA01 0x0b4 0x3c8 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x0b4 0x3c8 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22 0x0b4 0x3c8 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x0b8 0x3cc 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT10__LCD_DATA10 0x0b8 0x3cc 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x0b8 0x3cc 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x0bc 0x3d0 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT11__LCD_DATA11 0x0bc 0x3d0 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x0bc 0x3d0 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x0c0 0x3d4 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT12__LCD_DATA12 0x0c0 0x3d4 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06 0x0c0 0x3d4 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x0c4 0x3d8 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT13__LCD_DATA13 0x0c4 0x3d8 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT13__AUD5_RXFS 0x0c4 0x3d8 0x7bc 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x0c4 0x3d8 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x0c8 0x3dc 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT14__LCD_DATA14 0x0c8 0x3dc 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT14__AUD5_RXC 0x0c8 0x3dc 0x7b8 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x0c8 0x3dc 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x0cc 0x3e0 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT15__LCD_DATA15 0x0cc 0x3e0 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT15__ECSPI1_SS1 0x0cc 0x3e0 0x7e8 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT15__ECSPI2_SS1 0x0cc 0x3e0 0x804 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x0cc 0x3e0 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x0d0 0x3e4 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT16__LCD_DATA16 0x0d0 0x3e4 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x0d0 0x3e4 0x7fc 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT16__AUD5_TXC 0x0d0 0x3e4 0x7c0 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT16__SDMA_EXT_EVENT0 0x0d0 0x3e4 0x8e8 0x4 0x0
-#define MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x0d0 0x3e4 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x0d4 0x3e8 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT17__LCD_DATA17 0x0d4 0x3e8 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO 0x0d4 0x3e8 0x7f8 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT17__AUD5_TXD 0x0d4 0x3e8 0x7b4 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT17__SDMA_EXT_EVENT1 0x0d4 0x3e8 0x8ec 0x4 0x0
-#define MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x0d4 0x3e8 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x0d8 0x3ec 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT18__LCD_DATA18 0x0d8 0x3ec 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT18__ECSPI2_SS0 0x0d8 0x3ec 0x800 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS 0x0d8 0x3ec 0x7c4 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT18__AUD4_RXFS 0x0d8 0x3ec 0x7a4 0x4 0x0
-#define MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x0d8 0x3ec 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT18__EIM_CS2_B 0x0d8 0x3ec 0x000 0x7 0x0
-#define MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x0dc 0x3f0 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT19__LCD_DATA19 0x0dc 0x3f0 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x0dc 0x3f0 0x7f4 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x0dc 0x3f0 0x7b0 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT19__AUD4_RXC 0x0dc 0x3f0 0x7a0 0x4 0x0
-#define MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x0dc 0x3f0 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT19__EIM_CS3_B 0x0dc 0x3f0 0x000 0x7 0x0
-#define MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x0e0 0x3f4 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT2__LCD_DATA02 0x0e0 0x3f4 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x0e0 0x3f4 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23 0x0e0 0x3f4 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x0e4 0x3f8 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT20__LCD_DATA20 0x0e4 0x3f8 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT20__ECSPI1_SCLK 0x0e4 0x3f8 0x7d8 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x0e4 0x3f8 0x7a8 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x0e4 0x3f8 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x0e8 0x3fc 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT21__LCD_DATA21 0x0e8 0x3fc 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT21__ECSPI1_MOSI 0x0e8 0x3fc 0x7e0 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x0e8 0x3fc 0x79c 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x0e8 0x3fc 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x0ec 0x400 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT22__LCD_DATA22 0x0ec 0x400 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT22__ECSPI1_MISO 0x0ec 0x400 0x7dc 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x0ec 0x400 0x7ac 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x0ec 0x400 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x0f0 0x404 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT23__LCD_DATA23 0x0f0 0x404 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT23__ECSPI1_SS0 0x0f0 0x404 0x7e4 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x0f0 0x404 0x798 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x0f0 0x404 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x0f4 0x408 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT3__LCD_DATA03 0x0f4 0x408 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT3__ECSPI3_SS0 0x0f4 0x408 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x0f4 0x408 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x0f8 0x40c 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT4__LCD_DATA04 0x0f8 0x40c 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT4__ECSPI3_SS1 0x0f8 0x40c 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x0f8 0x40c 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x0fc 0x410 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT5__LCD_DATA05 0x0fc 0x410 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT5__ECSPI3_SS2 0x0fc 0x410 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT5__AUD6_RXFS 0x0fc 0x410 0x000 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x0fc 0x410 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100 0x414 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT6__LCD_DATA06 0x100 0x414 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT6__ECSPI3_SS3 0x100 0x414 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT6__AUD6_RXC 0x100 0x414 0x000 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x100 0x414 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x104 0x418 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT7__LCD_DATA07 0x104 0x418 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT7__ECSPI3_RDY 0x104 0x418 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x104 0x418 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x108 0x41c 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT8__LCD_DATA08 0x108 0x41c 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x108 0x41c 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x108 0x41c 0x000 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29 0x108 0x41c 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10c 0x420 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT9__LCD_DATA09 0x10c 0x420 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x10c 0x420 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT9__WDOG2_B 0x10c 0x420 0x000 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x10c 0x420 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A16__EIM_ADDR16 0x110 0x4e0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK 0x110 0x4e0 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK 0x110 0x4e0 0x8b8 0x2 0x0
-#define MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x110 0x4e0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A16__SRC_BOOT_CFG16 0x110 0x4e0 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A16__EPDC_DATA00 0x110 0x4e0 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A17__EIM_ADDR17 0x114 0x4e4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12 0x114 0x4e4 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12 0x114 0x4e4 0x890 0x2 0x0
-#define MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x114 0x4e4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A17__SRC_BOOT_CFG17 0x114 0x4e4 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A17__EPDC_PWR_STAT 0x114 0x4e4 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A18__EIM_ADDR18 0x118 0x4e8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13 0x118 0x4e8 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A18__IPU1_CSI1_DATA13 0x118 0x4e8 0x894 0x2 0x0
-#define MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x118 0x4e8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A18__SRC_BOOT_CFG18 0x118 0x4e8 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A18__EPDC_PWR_CTRL0 0x118 0x4e8 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A19__EIM_ADDR19 0x11c 0x4ec 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14 0x11c 0x4ec 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A19__IPU1_CSI1_DATA14 0x11c 0x4ec 0x898 0x2 0x0
-#define MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x11c 0x4ec 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A19__SRC_BOOT_CFG19 0x11c 0x4ec 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A19__EPDC_PWR_CTRL1 0x11c 0x4ec 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A20__EIM_ADDR20 0x120 0x4f0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15 0x120 0x4f0 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A20__IPU1_CSI1_DATA15 0x120 0x4f0 0x89c 0x2 0x0
-#define MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x120 0x4f0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A20__SRC_BOOT_CFG20 0x120 0x4f0 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A20__EPDC_PWR_CTRL2 0x120 0x4f0 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A21__EIM_ADDR21 0x124 0x4f4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16 0x124 0x4f4 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A21__IPU1_CSI1_DATA16 0x124 0x4f4 0x8a0 0x2 0x0
-#define MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x124 0x4f4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A21__SRC_BOOT_CFG21 0x124 0x4f4 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A21__EPDC_GDCLK 0x124 0x4f4 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A22__EIM_ADDR22 0x128 0x4f8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17 0x128 0x4f8 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A22__IPU1_CSI1_DATA17 0x128 0x4f8 0x8a4 0x2 0x0
-#define MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x128 0x4f8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A22__SRC_BOOT_CFG22 0x128 0x4f8 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A22__EPDC_GDSP 0x128 0x4f8 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A23__EIM_ADDR23 0x12c 0x4fc 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18 0x12c 0x4fc 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A23__IPU1_CSI1_DATA18 0x12c 0x4fc 0x8a8 0x2 0x0
-#define MX6QDL_PAD_EIM_A23__IPU1_SISG3 0x12c 0x4fc 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x12c 0x4fc 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A23__SRC_BOOT_CFG23 0x12c 0x4fc 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A23__EPDC_GDOE 0x12c 0x4fc 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A24__EIM_ADDR24 0x130 0x500 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19 0x130 0x500 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A24__IPU1_CSI1_DATA19 0x130 0x500 0x8ac 0x2 0x0
-#define MX6QDL_PAD_EIM_A24__IPU1_SISG2 0x130 0x500 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x130 0x500 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A24__SRC_BOOT_CFG24 0x130 0x500 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A24__EPDC_GDRL 0x130 0x500 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A25__EIM_ADDR25 0x134 0x504 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A25__ECSPI4_SS1 0x134 0x504 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A25__ECSPI2_RDY 0x134 0x504 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_A25__IPU1_DI1_PIN12 0x134 0x504 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_A25__IPU1_DI0_D1_CS 0x134 0x504 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x134 0x504 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x134 0x504 0x85c 0x6 0x0
-#define MX6QDL_PAD_EIM_A25__EPDC_DATA15 0x134 0x504 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A25__EIM_ACLK_FREERUN 0x134 0x504 0x000 0x9 0x0
-#define MX6QDL_PAD_EIM_BCLK__EIM_BCLK 0x138 0x508 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_BCLK__IPU1_DI1_PIN16 0x138 0x508 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x138 0x508 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_BCLK__EPDC_SDCE9 0x138 0x508 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0x13c 0x50c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_CS0__IPU1_DI1_PIN05 0x13c 0x50c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x13c 0x50c 0x7f4 0x2 0x2
-#define MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x13c 0x50c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_CS0__EPDC_DATA06 0x13c 0x50c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0x140 0x510 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_CS1__IPU1_DI1_PIN06 0x140 0x510 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x140 0x510 0x7fc 0x2 0x2
-#define MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x140 0x510 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_CS1__EPDC_DATA08 0x140 0x510 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D16__EIM_DATA16 0x144 0x514 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x144 0x514 0x7d8 0x1 0x2
-#define MX6QDL_PAD_EIM_D16__IPU1_DI0_PIN05 0x144 0x514 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18 0x144 0x514 0x8a8 0x3 0x1
-#define MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x144 0x514 0x864 0x4 0x0
-#define MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x144 0x514 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D16__I2C2_SDA 0x144 0x514 0x874 0x6 0x0
-#define MX6QDL_PAD_EIM_D16__EPDC_DATA10 0x144 0x514 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D17__EIM_DATA17 0x148 0x518 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x148 0x518 0x7dc 0x1 0x2
-#define MX6QDL_PAD_EIM_D17__IPU1_DI0_PIN06 0x148 0x518 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D17__IPU1_CSI1_PIXCLK 0x148 0x518 0x8b8 0x3 0x1
-#define MX6QDL_PAD_EIM_D17__DCIC1_OUT 0x148 0x518 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x148 0x518 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D17__I2C3_SCL 0x148 0x518 0x878 0x6 0x0
-#define MX6QDL_PAD_EIM_D17__EPDC_VCOM0 0x148 0x518 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D18__EIM_DATA18 0x14c 0x51c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x14c 0x51c 0x7e0 0x1 0x2
-#define MX6QDL_PAD_EIM_D18__IPU1_DI0_PIN07 0x14c 0x51c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17 0x14c 0x51c 0x8a4 0x3 0x1
-#define MX6QDL_PAD_EIM_D18__IPU1_DI1_D0_CS 0x14c 0x51c 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x14c 0x51c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D18__I2C3_SDA 0x14c 0x51c 0x87c 0x6 0x0
-#define MX6QDL_PAD_EIM_D18__EPDC_VCOM1 0x14c 0x51c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D19__EIM_DATA19 0x150 0x520 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D19__ECSPI1_SS1 0x150 0x520 0x7e8 0x1 0x1
-#define MX6QDL_PAD_EIM_D19__IPU1_DI0_PIN08 0x150 0x520 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16 0x150 0x520 0x8a0 0x3 0x1
-#define MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x150 0x520 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x150 0x520 0x8f8 0x4 0x0
-#define MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x150 0x520 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D19__EPIT1_OUT 0x150 0x520 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D19__EPDC_DATA12 0x150 0x520 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D20__EIM_DATA20 0x154 0x524 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D20__ECSPI4_SS0 0x154 0x524 0x808 0x1 0x0
-#define MX6QDL_PAD_EIM_D20__IPU1_DI0_PIN16 0x154 0x524 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15 0x154 0x524 0x89c 0x3 0x1
-#define MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x154 0x524 0x8f8 0x4 0x1
-#define MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x154 0x524 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x154 0x524 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D20__EPIT2_OUT 0x154 0x524 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D21__EIM_DATA21 0x158 0x528 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x158 0x528 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D21__IPU1_DI0_PIN17 0x158 0x528 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D21__IPU1_CSI1_DATA11 0x158 0x528 0x88c 0x3 0x0
-#define MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x158 0x528 0x920 0x4 0x0
-#define MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x158 0x528 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D21__I2C1_SCL 0x158 0x528 0x868 0x6 0x1
-#define MX6QDL_PAD_EIM_D21__SPDIF_IN 0x158 0x528 0x8f0 0x7 0x0
-#define MX6QDL_PAD_EIM_D22__EIM_DATA22 0x15c 0x52c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x15c 0x52c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D22__IPU1_DI0_PIN01 0x15c 0x52c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D22__IPU1_CSI1_DATA10 0x15c 0x52c 0x888 0x3 0x0
-#define MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x15c 0x52c 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x15c 0x52c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D22__SPDIF_OUT 0x15c 0x52c 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D22__EPDC_SDCE6 0x15c 0x52c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D23__EIM_DATA23 0x160 0x530 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D23__IPU1_DI0_D0_CS 0x160 0x530 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x160 0x530 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D23__UART3_RTS_B 0x160 0x530 0x908 0x2 0x0
-#define MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x160 0x530 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_D23__IPU1_CSI1_DATA_EN 0x160 0x530 0x8b0 0x4 0x0
-#define MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x160 0x530 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN02 0x160 0x530 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN14 0x160 0x530 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D23__EPDC_DATA11 0x160 0x530 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D24__EIM_DATA24 0x164 0x534 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D24__ECSPI4_SS2 0x164 0x534 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x164 0x534 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D24__UART3_RX_DATA 0x164 0x534 0x90c 0x2 0x0
-#define MX6QDL_PAD_EIM_D24__ECSPI1_SS2 0x164 0x534 0x7ec 0x3 0x0
-#define MX6QDL_PAD_EIM_D24__ECSPI2_SS2 0x164 0x534 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x164 0x534 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D24__AUD5_RXFS 0x164 0x534 0x7bc 0x6 0x1
-#define MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x164 0x534 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D24__EPDC_SDCE7 0x164 0x534 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D25__EIM_DATA25 0x168 0x538 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D25__ECSPI4_SS3 0x168 0x538 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x168 0x538 0x90c 0x2 0x1
-#define MX6QDL_PAD_EIM_D25__UART3_TX_DATA 0x168 0x538 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D25__ECSPI1_SS3 0x168 0x538 0x7f0 0x3 0x0
-#define MX6QDL_PAD_EIM_D25__ECSPI2_SS3 0x168 0x538 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x168 0x538 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D25__AUD5_RXC 0x168 0x538 0x7b8 0x6 0x1
-#define MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x168 0x538 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D25__EPDC_SDCE8 0x168 0x538 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D26__EIM_DATA26 0x16c 0x53c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_DI1_PIN11 0x16c 0x53c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_CSI0_DATA01 0x16c 0x53c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14 0x16c 0x53c 0x898 0x3 0x1
-#define MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x16c 0x53c 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x16c 0x53c 0x904 0x4 0x0
-#define MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x16c 0x53c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_SISG2 0x16c 0x53c 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22 0x16c 0x53c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D26__EPDC_SDOED 0x16c 0x53c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D27__EIM_DATA27 0x170 0x540 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_DI1_PIN13 0x170 0x540 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_CSI0_DATA00 0x170 0x540 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13 0x170 0x540 0x894 0x3 0x1
-#define MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x170 0x540 0x904 0x4 0x1
-#define MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x170 0x540 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x170 0x540 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_SISG3 0x170 0x540 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23 0x170 0x540 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D27__EPDC_SDOE 0x170 0x540 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D28__EIM_DATA28 0x174 0x544 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D28__I2C1_SDA 0x174 0x544 0x86c 0x1 0x1
-#define MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x174 0x544 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D28__IPU1_CSI1_DATA12 0x174 0x544 0x890 0x3 0x1
-#define MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x174 0x544 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D28__UART2_RTS_B 0x174 0x544 0x900 0x4 0x0
-#define MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x174 0x544 0x900 0x4 0x0
-#define MX6QDL_PAD_EIM_D28__UART2_DTE_RTS_B 0x174 0x544 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x174 0x544 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D28__IPU1_EXT_TRIG 0x174 0x544 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D28__IPU1_DI0_PIN13 0x174 0x544 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D28__EPDC_PWR_CTRL3 0x174 0x544 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D29__EIM_DATA29 0x178 0x548 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D29__IPU1_DI1_PIN15 0x178 0x548 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D29__ECSPI4_SS0 0x178 0x548 0x808 0x2 0x1
-#define MX6QDL_PAD_EIM_D29__UART2_RTS_B 0x178 0x548 0x900 0x4 0x1
-#define MX6QDL_PAD_EIM_D29__UART2_CTS_B 0x178 0x548 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x178 0x548 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B 0x178 0x548 0x900 0x4 0x1
-#define MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x178 0x548 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC 0x178 0x548 0x8bc 0x6 0x0
-#define MX6QDL_PAD_EIM_D29__IPU1_DI0_PIN14 0x178 0x548 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D29__EPDC_PWR_WAKE 0x178 0x548 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D30__EIM_DATA30 0x17c 0x54c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21 0x17c 0x54c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D30__IPU1_DI0_PIN11 0x17c 0x54c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D30__IPU1_CSI0_DATA03 0x17c 0x54c 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x17c 0x54c 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D30__UART3_RTS_B 0x17c 0x54c 0x908 0x4 0x1
-#define MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x17c 0x54c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D30__USB_H1_OC 0x17c 0x54c 0x924 0x6 0x0
-#define MX6QDL_PAD_EIM_D30__EPDC_SDOEZ 0x17c 0x54c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D31__EIM_DATA31 0x180 0x550 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20 0x180 0x550 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D31__IPU1_DI0_PIN12 0x180 0x550 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D31__IPU1_CSI0_DATA02 0x180 0x550 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x180 0x550 0x908 0x4 0x2
-#define MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x180 0x550 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x180 0x550 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D31__USB_H1_PWR 0x180 0x550 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D31__EPDC_SDCLK_P 0x180 0x550 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D31__EIM_ACLK_FREERUN 0x180 0x550 0x000 0x9 0x0
-#define MX6QDL_PAD_EIM_DA0__EIM_AD00 0x184 0x554 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09 0x184 0x554 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA0__IPU1_CSI1_DATA09 0x184 0x554 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x184 0x554 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA0__SRC_BOOT_CFG00 0x184 0x554 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA0__EPDC_SDCLK_N 0x184 0x554 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA1__EIM_AD01 0x188 0x558 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08 0x188 0x558 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA1__IPU1_CSI1_DATA08 0x188 0x558 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x188 0x558 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA1__SRC_BOOT_CFG01 0x188 0x558 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA1__EPDC_SDLE 0x188 0x558 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA10__EIM_AD10 0x18c 0x55c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15 0x18c 0x55c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA10__IPU1_CSI1_DATA_EN 0x18c 0x55c 0x8b0 0x2 0x1
-#define MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x18c 0x55c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA10__SRC_BOOT_CFG10 0x18c 0x55c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA10__EPDC_DATA01 0x18c 0x55c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA11__EIM_AD11 0x190 0x560 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02 0x190 0x560 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA11__IPU1_CSI1_HSYNC 0x190 0x560 0x8b4 0x2 0x0
-#define MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x190 0x560 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA11__SRC_BOOT_CFG11 0x190 0x560 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA11__EPDC_DATA03 0x190 0x560 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA12__EIM_AD12 0x194 0x564 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03 0x194 0x564 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA12__IPU1_CSI1_VSYNC 0x194 0x564 0x8bc 0x2 0x1
-#define MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x194 0x564 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA12__SRC_BOOT_CFG12 0x194 0x564 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA12__EPDC_DATA02 0x194 0x564 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA13__EIM_AD13 0x198 0x568 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA13__IPU1_DI1_D0_CS 0x198 0x568 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x198 0x568 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA13__SRC_BOOT_CFG13 0x198 0x568 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA13__EPDC_DATA13 0x198 0x568 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA14__EIM_AD14 0x19c 0x56c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA14__IPU1_DI1_D1_CS 0x19c 0x56c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x19c 0x56c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA14__SRC_BOOT_CFG14 0x19c 0x56c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA14__EPDC_DATA14 0x19c 0x56c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA15__EIM_AD15 0x1a0 0x570 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN01 0x1a0 0x570 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN04 0x1a0 0x570 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x1a0 0x570 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA15__SRC_BOOT_CFG15 0x1a0 0x570 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA15__EPDC_DATA09 0x1a0 0x570 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA2__EIM_AD02 0x1a4 0x574 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07 0x1a4 0x574 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA2__IPU1_CSI1_DATA07 0x1a4 0x574 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x1a4 0x574 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA2__SRC_BOOT_CFG02 0x1a4 0x574 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA2__EPDC_BDR0 0x1a4 0x574 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA3__EIM_AD03 0x1a8 0x578 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06 0x1a8 0x578 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA3__IPU1_CSI1_DATA06 0x1a8 0x578 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x1a8 0x578 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA3__SRC_BOOT_CFG03 0x1a8 0x578 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA3__EPDC_BDR1 0x1a8 0x578 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA4__EIM_AD04 0x1ac 0x57c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05 0x1ac 0x57c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA4__IPU1_CSI1_DATA05 0x1ac 0x57c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1ac 0x57c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA4__SRC_BOOT_CFG04 0x1ac 0x57c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA4__EPDC_SDCE0 0x1ac 0x57c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA5__EIM_AD05 0x1b0 0x580 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04 0x1b0 0x580 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA5__IPU1_CSI1_DATA04 0x1b0 0x580 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0 0x580 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA5__SRC_BOOT_CFG05 0x1b0 0x580 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA5__EPDC_SDCE1 0x1b0 0x580 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA6__EIM_AD06 0x1b4 0x584 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03 0x1b4 0x584 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA6__IPU1_CSI1_DATA03 0x1b4 0x584 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x1b4 0x584 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA6__SRC_BOOT_CFG06 0x1b4 0x584 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA6__EPDC_SDCE2 0x1b4 0x584 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA7__EIM_AD07 0x1b8 0x588 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02 0x1b8 0x588 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA7__IPU1_CSI1_DATA02 0x1b8 0x588 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b8 0x588 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA7__SRC_BOOT_CFG07 0x1b8 0x588 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA7__EPDC_SDCE3 0x1b8 0x588 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA8__EIM_AD08 0x1bc 0x58c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01 0x1bc 0x58c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA8__IPU1_CSI1_DATA01 0x1bc 0x58c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x1bc 0x58c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA8__SRC_BOOT_CFG08 0x1bc 0x58c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA8__EPDC_SDCE4 0x1bc 0x58c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA9__EIM_AD09 0x1c0 0x590 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00 0x1c0 0x590 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA9__IPU1_CSI1_DATA00 0x1c0 0x590 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x1c0 0x590 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA9__SRC_BOOT_CFG09 0x1c0 0x590 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA9__EPDC_SDCE5 0x1c0 0x590 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_EB0__EIM_EB0_B 0x1c4 0x594 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11 0x1c4 0x594 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_EB0__IPU1_CSI1_DATA11 0x1c4 0x594 0x88c 0x2 0x1
-#define MX6QDL_PAD_EIM_EB0__CCM_PMIC_READY 0x1c4 0x594 0x7d4 0x4 0x0
-#define MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1c4 0x594 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_EB0__SRC_BOOT_CFG27 0x1c4 0x594 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_EB0__EPDC_PWR_COM 0x1c4 0x594 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_EB1__EIM_EB1_B 0x1c8 0x598 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10 0x1c8 0x598 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_EB1__IPU1_CSI1_DATA10 0x1c8 0x598 0x888 0x2 0x1
-#define MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1c8 0x598 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_EB1__SRC_BOOT_CFG28 0x1c8 0x598 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_EB1__EPDC_SDSHR 0x1c8 0x598 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_EB2__EIM_EB2_B 0x1cc 0x59c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_EB2__ECSPI1_SS0 0x1cc 0x59c 0x7e4 0x1 0x2
-#define MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19 0x1cc 0x59c 0x8ac 0x3 0x1
-#define MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x1cc 0x59c 0x860 0x4 0x0
-#define MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1cc 0x59c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x1cc 0x59c 0x870 0x6 0x0
-#define MX6QDL_PAD_EIM_EB2__SRC_BOOT_CFG30 0x1cc 0x59c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_EB2__EPDC_DATA05 0x1cc 0x59c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_EB3__EIM_EB3_B 0x1d0 0x5a0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_EB3__ECSPI4_RDY 0x1d0 0x5a0 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1d0 0x5a0 0x908 0x2 0x3
-#define MX6QDL_PAD_EIM_EB3__UART3_CTS_B 0x1d0 0x5a0 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_EB3__UART1_RI_B 0x1d0 0x5a0 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC 0x1d0 0x5a0 0x8b4 0x4 0x1
-#define MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x1d0 0x5a0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_EB3__IPU1_DI1_PIN03 0x1d0 0x5a0 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_EB3__SRC_BOOT_CFG31 0x1d0 0x5a0 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_EB3__EPDC_SDCE0 0x1d0 0x5a0 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_EB3__EIM_ACLK_FREERUN 0x1d0 0x5a0 0x000 0x9 0x0
-#define MX6QDL_PAD_EIM_LBA__EIM_LBA_B 0x1d4 0x5a4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_LBA__IPU1_DI1_PIN17 0x1d4 0x5a4 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_LBA__ECSPI2_SS1 0x1d4 0x5a4 0x804 0x2 0x1
-#define MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1d4 0x5a4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_LBA__SRC_BOOT_CFG26 0x1d4 0x5a4 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_LBA__EPDC_DATA04 0x1d4 0x5a4 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_OE__EIM_OE_B 0x1d8 0x5a8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_OE__IPU1_DI1_PIN07 0x1d8 0x5a8 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x1d8 0x5a8 0x7f8 0x2 0x2
-#define MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x1d8 0x5a8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_OE__EPDC_PWR_IRQ 0x1d8 0x5a8 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_RW__EIM_RW 0x1dc 0x5ac 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_RW__IPU1_DI1_PIN08 0x1dc 0x5ac 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_RW__ECSPI2_SS0 0x1dc 0x5ac 0x800 0x2 0x2
-#define MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1dc 0x5ac 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_RW__SRC_BOOT_CFG29 0x1dc 0x5ac 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_RW__EPDC_DATA07 0x1dc 0x5ac 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0x1e0 0x5b0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_WAIT__EIM_DTACK_B 0x1e0 0x5b0 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1e0 0x5b0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_WAIT__SRC_BOOT_CFG25 0x1e0 0x5b0 0x000 0x7 0x0
-#define MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1e4 0x5b4 0x828 0x1 0x0
-#define MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1e4 0x5b4 0x840 0x2 0x0
-#define MX6QDL_PAD_ENET_CRS_DV__SPDIF_EXT_CLK 0x1e4 0x5b4 0x8f4 0x3 0x0
-#define MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1e4 0x5b4 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_MDC__MLB_DATA 0x1e8 0x5b8 0x8e0 0x0 0x0
-#define MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1e8 0x5b8 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0 0x1e8 0x5b8 0x858 0x2 0x0
-#define MX6QDL_PAD_ENET_MDC__ENET_1588_EVENT1_IN 0x1e8 0x5b8 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_MDC__GPIO1_IO31 0x1e8 0x5b8 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1ec 0x5bc 0x810 0x1 0x0
-#define MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK 0x1ec 0x5bc 0x83c 0x2 0x0
-#define MX6QDL_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT 0x1ec 0x5bc 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_MDIO__GPIO1_IO22 0x1ec 0x5bc 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_MDIO__SPDIF_LOCK 0x1ec 0x5bc 0x000 0x6 0x0
-#define MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1f0 0x5c0 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_REF_CLK__ESAI_RX_FS 0x1f0 0x5c0 0x82c 0x2 0x0
-#define MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1f0 0x5c0 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_REF_CLK__SPDIF_SR_CLK 0x1f0 0x5c0 0x000 0x6 0x0
-#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1f4 0x5c4 0x790 0x0 0x0
-#define MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1f4 0x5c4 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK 0x1f4 0x5c4 0x834 0x2 0x0
-#define MX6QDL_PAD_ENET_RX_ER__SPDIF_IN 0x1f4 0x5c4 0x8f0 0x3 0x1
-#define MX6QDL_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1f4 0x5c4 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x1f4 0x5c4 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1f8 0x5c8 0x818 0x1 0x0
-#define MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK 0x1f8 0x5c8 0x838 0x2 0x0
-#define MX6QDL_PAD_ENET_RXD0__SPDIF_OUT 0x1f8 0x5c8 0x000 0x3 0x0
-#define MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1f8 0x5c8 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_RXD1__MLB_SIG 0x1fc 0x5cc 0x8e4 0x0 0x0
-#define MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1fc 0x5cc 0x81c 0x1 0x0
-#define MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS 0x1fc 0x5cc 0x830 0x2 0x0
-#define MX6QDL_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT 0x1fc 0x5cc 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1fc 0x5cc 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x200 0x5d0 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x200 0x5d0 0x850 0x2 0x0
-#define MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x200 0x5d0 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_TX_EN__I2C4_SCL 0x200 0x5d0 0x880 0x9 0x0
-#define MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x204 0x5d4 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1 0x204 0x5d4 0x854 0x2 0x0
-#define MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x204 0x5d4 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_TXD1__MLB_CLK 0x208 0x5d8 0x8dc 0x0 0x0
-#define MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x208 0x5d8 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_TXD1__ESAI_TX2_RX3 0x208 0x5d8 0x84c 0x2 0x0
-#define MX6QDL_PAD_ENET_TXD1__ENET_1588_EVENT0_IN 0x208 0x5d8 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x208 0x5d8 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_TXD1__I2C4_SDA 0x208 0x5d8 0x884 0x9 0x0
-#define MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x20c 0x5dc 0x000 0x0 0x0
-#define MX6QDL_PAD_GPIO_0__KEY_COL5 0x20c 0x5dc 0x8c0 0x2 0x1
-#define MX6QDL_PAD_GPIO_0__ASRC_EXT_CLK 0x20c 0x5dc 0x794 0x3 0x0
-#define MX6QDL_PAD_GPIO_0__EPIT1_OUT 0x20c 0x5dc 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x20c 0x5dc 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x20c 0x5dc 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_0__SNVS_VIO_5 0x20c 0x5dc 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_1__ESAI_RX_CLK 0x210 0x5e0 0x83c 0x0 0x1
-#define MX6QDL_PAD_GPIO_1__WDOG2_B 0x210 0x5e0 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_1__KEY_ROW5 0x210 0x5e0 0x8cc 0x2 0x1
-#define MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x210 0x5e0 0x790 0x3 0x1
-#define MX6QDL_PAD_GPIO_1__PWM2_OUT 0x210 0x5e0 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x210 0x5e0 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_1__SD1_CD_B 0x210 0x5e0 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_16__ESAI_TX3_RX2 0x214 0x5e4 0x850 0x0 0x1
-#define MX6QDL_PAD_GPIO_16__ENET_1588_EVENT2_IN 0x214 0x5e4 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x214 0x5e4 0x80c 0x2 0x0
-#define MX6QDL_PAD_GPIO_16__SD1_LCTL 0x214 0x5e4 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_16__SPDIF_IN 0x214 0x5e4 0x8f0 0x4 0x2
-#define MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x214 0x5e4 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_16__I2C3_SDA 0x214 0x5e4 0x87c 0x6 0x1
-#define MX6QDL_PAD_GPIO_16__JTAG_DE_B 0x214 0x5e4 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_17__ESAI_TX0 0x218 0x5e8 0x844 0x0 0x0
-#define MX6QDL_PAD_GPIO_17__ENET_1588_EVENT3_IN 0x218 0x5e8 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_17__CCM_PMIC_READY 0x218 0x5e8 0x7d4 0x2 0x1
-#define MX6QDL_PAD_GPIO_17__SDMA_EXT_EVENT0 0x218 0x5e8 0x8e8 0x3 0x1
-#define MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x218 0x5e8 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x218 0x5e8 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_18__ESAI_TX1 0x21c 0x5ec 0x848 0x0 0x0
-#define MX6QDL_PAD_GPIO_18__ENET_RX_CLK 0x21c 0x5ec 0x814 0x1 0x0
-#define MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x21c 0x5ec 0x000 0x2 0x0
-#define MX6QDL_PAD_GPIO_18__SDMA_EXT_EVENT1 0x21c 0x5ec 0x8ec 0x3 0x1
-#define MX6QDL_PAD_GPIO_18__ASRC_EXT_CLK 0x21c 0x5ec 0x794 0x4 0x1
-#define MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x21c 0x5ec 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_18__SNVS_VIO_5_CTL 0x21c 0x5ec 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_19__KEY_COL5 0x220 0x5f0 0x8c0 0x0 0x2
-#define MX6QDL_PAD_GPIO_19__ENET_1588_EVENT0_OUT 0x220 0x5f0 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x220 0x5f0 0x000 0x2 0x0
-#define MX6QDL_PAD_GPIO_19__CCM_CLKO1 0x220 0x5f0 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_19__ECSPI1_RDY 0x220 0x5f0 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x220 0x5f0 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_19__ENET_TX_ER 0x220 0x5f0 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_2__ESAI_TX_FS 0x224 0x5f4 0x830 0x0 0x1
-#define MX6QDL_PAD_GPIO_2__KEY_ROW6 0x224 0x5f4 0x8d0 0x2 0x1
-#define MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x224 0x5f4 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_2__SD2_WP 0x224 0x5f4 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_2__MLB_DATA 0x224 0x5f4 0x8e0 0x7 0x1
-#define MX6QDL_PAD_GPIO_3__ESAI_RX_HF_CLK 0x228 0x5f8 0x834 0x0 0x1
-#define MX6QDL_PAD_GPIO_3__I2C3_SCL 0x228 0x5f8 0x878 0x2 0x1
-#define MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M 0x228 0x5f8 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_3__CCM_CLKO2 0x228 0x5f8 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x228 0x5f8 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_3__USB_H1_OC 0x228 0x5f8 0x924 0x6 0x1
-#define MX6QDL_PAD_GPIO_3__MLB_CLK 0x228 0x5f8 0x8dc 0x7 0x1
-#define MX6QDL_PAD_GPIO_4__ESAI_TX_HF_CLK 0x22c 0x5fc 0x838 0x0 0x1
-#define MX6QDL_PAD_GPIO_4__KEY_COL7 0x22c 0x5fc 0x8c8 0x2 0x1
-#define MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x22c 0x5fc 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_4__SD2_CD_B 0x22c 0x5fc 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3 0x230 0x600 0x84c 0x0 0x1
-#define MX6QDL_PAD_GPIO_5__KEY_ROW7 0x230 0x600 0x8d4 0x2 0x1
-#define MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x230 0x600 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x230 0x600 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_5__I2C3_SCL 0x230 0x600 0x878 0x6 0x2
-#define MX6QDL_PAD_GPIO_5__ARM_EVENTI 0x230 0x600 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_6__ESAI_TX_CLK 0x234 0x604 0x840 0x0 0x1
-#define MX6QDL_PAD_GPIO_6__ENET_IRQ 0x234 0x604 0x03c 0x11 0xff000609
-#define MX6QDL_PAD_GPIO_6__I2C3_SDA 0x234 0x604 0x87c 0x2 0x2
-#define MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x234 0x604 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_6__SD2_LCTL 0x234 0x604 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_6__MLB_SIG 0x234 0x604 0x8e4 0x7 0x1
-#define MX6QDL_PAD_GPIO_7__ESAI_TX4_RX1 0x238 0x608 0x854 0x0 0x1
-#define MX6QDL_PAD_GPIO_7__EPIT1_OUT 0x238 0x608 0x000 0x2 0x0
-#define MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x238 0x608 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x238 0x608 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_7__UART2_RX_DATA 0x238 0x608 0x904 0x4 0x2
-#define MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x238 0x608 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_7__SPDIF_LOCK 0x238 0x608 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_7__USB_OTG_HOST_MODE 0x238 0x608 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_7__I2C4_SCL 0x238 0x608 0x880 0x8 0x1
-#define MX6QDL_PAD_GPIO_8__ESAI_TX5_RX0 0x23c 0x60c 0x858 0x0 0x1
-#define MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K 0x23c 0x60c 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_8__EPIT2_OUT 0x23c 0x60c 0x000 0x2 0x0
-#define MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x23c 0x60c 0x7c8 0x3 0x0
-#define MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x23c 0x60c 0x904 0x4 0x3
-#define MX6QDL_PAD_GPIO_8__UART2_TX_DATA 0x23c 0x60c 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x23c 0x60c 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_8__SPDIF_SR_CLK 0x23c 0x60c 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE 0x23c 0x60c 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_8__I2C4_SDA 0x23c 0x60c 0x884 0x8 0x1
-#define MX6QDL_PAD_GPIO_9__ESAI_RX_FS 0x240 0x610 0x82c 0x0 0x1
-#define MX6QDL_PAD_GPIO_9__WDOG1_B 0x240 0x610 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_9__KEY_COL6 0x240 0x610 0x8c4 0x2 0x1
-#define MX6QDL_PAD_GPIO_9__CCM_REF_EN_B 0x240 0x610 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_9__PWM1_OUT 0x240 0x610 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x240 0x610 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_9__SD1_WP 0x240 0x610 0x92c 0x6 0x1
-#define MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x244 0x62c 0x7d8 0x0 0x3
-#define MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3 0x244 0x62c 0x824 0x1 0x0
-#define MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x244 0x62c 0x7c0 0x2 0x1
-#define MX6QDL_PAD_KEY_COL0__KEY_COL0 0x244 0x62c 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x244 0x62c 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_COL0__UART4_RX_DATA 0x244 0x62c 0x914 0x4 0x2
-#define MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x244 0x62c 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL0__DCIC1_OUT 0x244 0x62c 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x248 0x630 0x7dc 0x0 0x3
-#define MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x248 0x630 0x810 0x1 0x1
-#define MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x248 0x630 0x7c4 0x2 0x1
-#define MX6QDL_PAD_KEY_COL1__KEY_COL1 0x248 0x630 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x248 0x630 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_COL1__UART5_RX_DATA 0x248 0x630 0x91c 0x4 0x2
-#define MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x248 0x630 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL1__SD1_VSELECT 0x248 0x630 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_COL2__ECSPI1_SS1 0x24c 0x634 0x7e8 0x0 0x2
-#define MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2 0x24c 0x634 0x820 0x1 0x0
-#define MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x24c 0x634 0x000 0x2 0x0
-#define MX6QDL_PAD_KEY_COL2__KEY_COL2 0x24c 0x634 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL2__ENET_MDC 0x24c 0x634 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x24c 0x634 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE 0x24c 0x634 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_COL3__ECSPI1_SS3 0x250 0x638 0x7f0 0x0 0x1
-#define MX6QDL_PAD_KEY_COL3__ENET_CRS 0x250 0x638 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x250 0x638 0x860 0x2 0x1
-#define MX6QDL_PAD_KEY_COL3__KEY_COL3 0x250 0x638 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x250 0x638 0x870 0x4 0x1
-#define MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x250 0x638 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x250 0x638 0x8f0 0x6 0x3
-#define MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x254 0x63c 0x000 0x0 0x0
-#define MX6QDL_PAD_KEY_COL4__IPU1_SISG4 0x254 0x63c 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x254 0x63c 0x920 0x2 0x1
-#define MX6QDL_PAD_KEY_COL4__KEY_COL4 0x254 0x63c 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL4__UART5_RTS_B 0x254 0x63c 0x918 0x4 0x2
-#define MX6QDL_PAD_KEY_COL4__UART5_CTS_B 0x254 0x63c 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x254 0x63c 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x258 0x640 0x7e0 0x0 0x3
-#define MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3 0x258 0x640 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x258 0x640 0x7b4 0x2 0x1
-#define MX6QDL_PAD_KEY_ROW0__KEY_ROW0 0x258 0x640 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x258 0x640 0x914 0x4 0x3
-#define MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA 0x258 0x640 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x258 0x640 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW0__DCIC2_OUT 0x258 0x640 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0 0x25c 0x644 0x7e4 0x0 0x3
-#define MX6QDL_PAD_KEY_ROW1__ENET_COL 0x25c 0x644 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW1__AUD5_RXD 0x25c 0x644 0x7b0 0x2 0x1
-#define MX6QDL_PAD_KEY_ROW1__KEY_ROW1 0x25c 0x644 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x25c 0x644 0x91c 0x4 0x3
-#define MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA 0x25c 0x644 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x25c 0x644 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x25c 0x644 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_ROW2__ECSPI1_SS2 0x260 0x648 0x7ec 0x0 0x1
-#define MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2 0x260 0x648 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x260 0x648 0x7c8 0x2 0x1
-#define MX6QDL_PAD_KEY_ROW2__KEY_ROW2 0x260 0x648 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW2__SD2_VSELECT 0x260 0x648 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x260 0x648 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x260 0x648 0x85c 0x6 0x1
-#define MX6QDL_PAD_KEY_ROW3__ASRC_EXT_CLK 0x264 0x64c 0x794 0x1 0x2
-#define MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x264 0x64c 0x864 0x2 0x1
-#define MX6QDL_PAD_KEY_ROW3__KEY_ROW3 0x264 0x64c 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x264 0x64c 0x874 0x4 0x1
-#define MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x264 0x64c 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW3__SD1_VSELECT 0x264 0x64c 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x268 0x650 0x7cc 0x0 0x0
-#define MX6QDL_PAD_KEY_ROW4__IPU1_SISG5 0x268 0x650 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR 0x268 0x650 0x000 0x2 0x0
-#define MX6QDL_PAD_KEY_ROW4__KEY_ROW4 0x268 0x650 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW4__UART5_CTS_B 0x268 0x650 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_ROW4__UART5_RTS_B 0x268 0x650 0x918 0x4 0x3
-#define MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x268 0x650 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_ALE__NAND_ALE 0x26c 0x654 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x26c 0x654 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x26c 0x654 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CLE__NAND_CLE 0x270 0x658 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x270 0x658 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0x274 0x65c 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x274 0x65c 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0x278 0x660 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CS1__SD4_VSELECT 0x278 0x660 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x278 0x660 0x000 0x2 0x0
-#define MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x278 0x660 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS2__NAND_CE2_B 0x27c 0x664 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CS2__IPU1_SISG0 0x27c 0x664 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_CS2__ESAI_TX0 0x27c 0x664 0x844 0x2 0x1
-#define MX6QDL_PAD_NANDF_CS2__EIM_CRE 0x27c 0x664 0x000 0x3 0x0
-#define MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x27c 0x664 0x000 0x4 0x0
-#define MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x27c 0x664 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS3__NAND_CE3_B 0x280 0x668 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CS3__IPU1_SISG1 0x280 0x668 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_CS3__ESAI_TX1 0x280 0x668 0x848 0x2 0x1
-#define MX6QDL_PAD_NANDF_CS3__EIM_ADDR26 0x280 0x668 0x000 0x3 0x0
-#define MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x280 0x668 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS3__I2C4_SDA 0x280 0x668 0x884 0x9 0x2
-#define MX6QDL_PAD_NANDF_D0__NAND_DATA00 0x284 0x66c 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x284 0x66c 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x284 0x66c 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D1__NAND_DATA01 0x288 0x670 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x288 0x670 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x288 0x670 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D2__NAND_DATA02 0x28c 0x674 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x28c 0x674 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x28c 0x674 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D3__NAND_DATA03 0x290 0x678 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x290 0x678 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x290 0x678 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D4__NAND_DATA04 0x294 0x67c 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x294 0x67c 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x294 0x67c 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D5__NAND_DATA05 0x298 0x680 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x298 0x680 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x298 0x680 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D6__NAND_DATA06 0x29c 0x684 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x29c 0x684 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x29c 0x684 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D7__NAND_DATA07 0x2a0 0x688 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x2a0 0x688 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x2a0 0x688 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0x2a4 0x68c 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x2a4 0x68c 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0x2a8 0x690 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x2a8 0x690 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_WP_B__I2C4_SCL 0x2a8 0x690 0x880 0x9 0x2
-#define MX6QDL_PAD_RGMII_RD0__HSI_RX_READY 0x2ac 0x694 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x2ac 0x694 0x818 0x1 0x1
-#define MX6QDL_PAD_RGMII_RD0__GPIO6_IO25 0x2ac 0x694 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RD1__HSI_TX_FLAG 0x2b0 0x698 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x2b0 0x698 0x81c 0x1 0x1
-#define MX6QDL_PAD_RGMII_RD1__GPIO6_IO27 0x2b0 0x698 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RD2__HSI_TX_DATA 0x2b4 0x69c 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x2b4 0x69c 0x820 0x1 0x1
-#define MX6QDL_PAD_RGMII_RD2__GPIO6_IO28 0x2b4 0x69c 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RD3__HSI_TX_WAKE 0x2b8 0x6a0 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x2b8 0x6a0 0x824 0x1 0x1
-#define MX6QDL_PAD_RGMII_RD3__GPIO6_IO29 0x2b8 0x6a0 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RX_CTL__USB_H3_DATA 0x2bc 0x6a4 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x2bc 0x6a4 0x828 0x1 0x1
-#define MX6QDL_PAD_RGMII_RX_CTL__GPIO6_IO24 0x2bc 0x6a4 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE 0x2c0 0x6a8 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x2c0 0x6a8 0x814 0x1 0x1
-#define MX6QDL_PAD_RGMII_RXC__GPIO6_IO30 0x2c0 0x6a8 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TD0__HSI_TX_READY 0x2c4 0x6ac 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x2c4 0x6ac 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TD0__GPIO6_IO20 0x2c4 0x6ac 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TD1__HSI_RX_FLAG 0x2c8 0x6b0 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x2c8 0x6b0 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x2c8 0x6b0 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TD2__HSI_RX_DATA 0x2cc 0x6b4 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x2cc 0x6b4 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TD2__GPIO6_IO22 0x2cc 0x6b4 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TD3__HSI_RX_WAKE 0x2d0 0x6b8 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x2d0 0x6b8 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x2d0 0x6b8 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x2d4 0x6bc 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x2d4 0x6bc 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26 0x2d4 0x6bc 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TX_CTL__ENET_REF_CLK 0x2d4 0x6bc 0x80c 0x7 0x1
-#define MX6QDL_PAD_RGMII_TXC__USB_H2_DATA 0x2d8 0x6c0 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x2d8 0x6c0 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TXC__SPDIF_EXT_CLK 0x2d8 0x6c0 0x8f4 0x2 0x1
-#define MX6QDL_PAD_RGMII_TXC__GPIO6_IO19 0x2d8 0x6c0 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M 0x2d8 0x6c0 0x000 0x7 0x0
-#define MX6QDL_PAD_SD1_CLK__SD1_CLK 0x2dc 0x6c4 0x928 0x0 0x1
-#define MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x2dc 0x6c4 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_CLK__GPT_CLKIN 0x2dc 0x6c4 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x2dc 0x6c4 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_CMD__SD1_CMD 0x2e0 0x6c8 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x2e0 0x6c8 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_CMD__GPT_COMPARE1 0x2e0 0x6c8 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x2e0 0x6c8 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x2e4 0x6cc 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1 0x2e4 0x6cc 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x2e4 0x6cc 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x2e8 0x6d0 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x2e8 0x6d0 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2 0x2e8 0x6d0 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x2e8 0x6d0 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x2ec 0x6d4 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_DAT2__GPT_COMPARE2 0x2ec 0x6d4 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x2ec 0x6d4 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_DAT2__WDOG1_B 0x2ec 0x6d4 0x000 0x4 0x0
-#define MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x2ec 0x6d4 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT2__WDOG1_RESET_B_DEB 0x2ec 0x6d4 0x000 0x6 0x0
-#define MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x2f0 0x6d8 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_DAT3__GPT_COMPARE3 0x2f0 0x6d8 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x2f0 0x6d8 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_DAT3__WDOG2_B 0x2f0 0x6d8 0x000 0x4 0x0
-#define MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x2f0 0x6d8 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT3__WDOG2_RESET_B_DEB 0x2f0 0x6d8 0x000 0x6 0x0
-#define MX6QDL_PAD_SD2_CLK__SD2_CLK 0x2f4 0x6dc 0x930 0x0 0x1
-#define MX6QDL_PAD_SD2_CLK__KEY_COL5 0x2f4 0x6dc 0x8c0 0x2 0x3
-#define MX6QDL_PAD_SD2_CLK__AUD4_RXFS 0x2f4 0x6dc 0x7a4 0x3 0x1
-#define MX6QDL_PAD_SD2_CLK__GPIO1_IO10 0x2f4 0x6dc 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_CMD__SD2_CMD 0x2f8 0x6e0 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_CMD__KEY_ROW5 0x2f8 0x6e0 0x8cc 0x2 0x2
-#define MX6QDL_PAD_SD2_CMD__AUD4_RXC 0x2f8 0x6e0 0x7a0 0x3 0x1
-#define MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x2f8 0x6e0 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x2fc 0x6e4 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x2fc 0x6e4 0x798 0x3 0x1
-#define MX6QDL_PAD_SD2_DAT0__KEY_ROW7 0x2fc 0x6e4 0x8d4 0x4 0x2
-#define MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x2fc 0x6e4 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_DAT0__DCIC2_OUT 0x2fc 0x6e4 0x000 0x6 0x0
-#define MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x300 0x6e8 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_DAT1__EIM_CS2_B 0x300 0x6e8 0x000 0x2 0x0
-#define MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x300 0x6e8 0x7ac 0x3 0x1
-#define MX6QDL_PAD_SD2_DAT1__KEY_COL7 0x300 0x6e8 0x8c8 0x4 0x2
-#define MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x300 0x6e8 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x304 0x6ec 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_DAT2__EIM_CS3_B 0x304 0x6ec 0x000 0x2 0x0
-#define MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x304 0x6ec 0x79c 0x3 0x1
-#define MX6QDL_PAD_SD2_DAT2__KEY_ROW6 0x304 0x6ec 0x8d0 0x4 0x2
-#define MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x304 0x6ec 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x308 0x6f0 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_DAT3__KEY_COL6 0x308 0x6f0 0x8c4 0x2 0x2
-#define MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x308 0x6f0 0x7a8 0x3 0x1
-#define MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x308 0x6f0 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_CLK__SD3_CLK 0x30c 0x6f4 0x934 0x0 0x1
-#define MX6QDL_PAD_SD3_CLK__UART2_RTS_B 0x30c 0x6f4 0x900 0x1 0x2
-#define MX6QDL_PAD_SD3_CLK__UART2_CTS_B 0x30c 0x6f4 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x30c 0x6f4 0x7c8 0x2 0x2
-#define MX6QDL_PAD_SD3_CLK__GPIO7_IO03 0x30c 0x6f4 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_CMD__SD3_CMD 0x310 0x6f8 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_CMD__UART2_CTS_B 0x310 0x6f8 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_CMD__UART2_RTS_B 0x310 0x6f8 0x900 0x1 0x3
-#define MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x310 0x6f8 0x000 0x2 0x0
-#define MX6QDL_PAD_SD3_CMD__GPIO7_IO02 0x310 0x6f8 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x314 0x6fc 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT0__UART1_CTS_B 0x314 0x6fc 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT0__UART1_RTS_B 0x314 0x6fc 0x8f8 0x1 0x2
-#define MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x314 0x6fc 0x000 0x2 0x0
-#define MX6QDL_PAD_SD3_DAT0__GPIO7_IO04 0x314 0x6fc 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x318 0x700 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT1__UART1_RTS_B 0x318 0x700 0x8f8 0x1 0x3
-#define MX6QDL_PAD_SD3_DAT1__UART1_CTS_B 0x318 0x700 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x318 0x700 0x7cc 0x2 0x1
-#define MX6QDL_PAD_SD3_DAT1__GPIO7_IO05 0x318 0x700 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x31c 0x704 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x31c 0x704 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x320 0x708 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT3__UART3_CTS_B 0x320 0x708 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT3__UART3_RTS_B 0x320 0x708 0x908 0x1 0x4
-#define MX6QDL_PAD_SD3_DAT3__GPIO7_IO07 0x320 0x708 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x324 0x70c 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x324 0x70c 0x904 0x1 0x4
-#define MX6QDL_PAD_SD3_DAT4__UART2_TX_DATA 0x324 0x70c 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x324 0x70c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x328 0x710 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x328 0x710 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT5__UART2_RX_DATA 0x328 0x710 0x904 0x1 0x5
-#define MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x328 0x710 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x32c 0x714 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x32c 0x714 0x8fc 0x1 0x2
-#define MX6QDL_PAD_SD3_DAT6__UART1_TX_DATA 0x32c 0x714 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x32c 0x714 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x330 0x718 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x330 0x718 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT7__UART1_RX_DATA 0x330 0x718 0x8fc 0x1 0x3
-#define MX6QDL_PAD_SD3_DAT7__GPIO6_IO17 0x330 0x718 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_RST__SD3_RESET 0x334 0x71c 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_RST__UART3_RTS_B 0x334 0x71c 0x908 0x1 0x5
-#define MX6QDL_PAD_SD3_RST__UART3_CTS_B 0x334 0x71c 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x334 0x71c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_CLK__SD4_CLK 0x338 0x720 0x938 0x0 0x1
-#define MX6QDL_PAD_SD4_CLK__NAND_WE_B 0x338 0x720 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x338 0x720 0x90c 0x2 0x2
-#define MX6QDL_PAD_SD4_CLK__UART3_TX_DATA 0x338 0x720 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_CLK__GPIO7_IO10 0x338 0x720 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_CMD__SD4_CMD 0x33c 0x724 0x000 0x0 0x0
-#define MX6QDL_PAD_SD4_CMD__NAND_RE_B 0x33c 0x724 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x33c 0x724 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_CMD__UART3_RX_DATA 0x33c 0x724 0x90c 0x2 0x3
-#define MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x33c 0x724 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x340 0x728 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x340 0x728 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x340 0x728 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x344 0x72c 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x344 0x72c 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x344 0x72c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x348 0x730 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x348 0x730 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x348 0x730 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x34c 0x734 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x34c 0x734 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x350 0x738 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x350 0x738 0x904 0x2 0x6
-#define MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA 0x350 0x738 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x350 0x738 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x354 0x73c 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x354 0x73c 0x900 0x2 0x4
-#define MX6QDL_PAD_SD4_DAT5__UART2_CTS_B 0x354 0x73c 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x354 0x73c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x358 0x740 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x358 0x740 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x358 0x740 0x900 0x2 0x5
-#define MX6QDL_PAD_SD4_DAT6__GPIO2_IO14 0x358 0x740 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x35c 0x744 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x35c 0x744 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x35c 0x744 0x904 0x2 0x7
-#define MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x35c 0x744 0x000 0x5 0x0
-
-#endif /* __DTS_IMX6DL_PINFUNC_H */
diff --git a/arch/arm/dts/imx6dl.dtsi b/arch/arm/dts/imx6dl.dtsi
index e2ec0fb..4daf040 100644
--- a/arch/arm/dts/imx6dl.dtsi
+++ b/arch/arm/dts/imx6dl.dtsi
@@ -1,112 +1,2 @@
-
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "imx6dl-pinfunc.h"
-#include "imx6qdl-pingrp.h"
#include "imx6qdl.dtsi"
-
-/ {
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- compatible = "arm,cortex-a9";
- device_type = "cpu";
- reg = <0>;
- next-level-cache = <&L2>;
- operating-points = <
- /* kHz uV */
- 996000 1275000
- 792000 1175000
- 396000 1075000
- >;
- fsl,soc-operating-points = <
- /* ARM kHz SOC-PU uV */
- 996000 1175000
- 792000 1175000
- 396000 1175000
- >;
- clock-latency = <61036>; /* two CLK32 periods */
- clocks = <&clks 104>, <&clks 6>, <&clks 16>,
- <&clks 17>, <&clks 170>;
- clock-names = "arm", "pll2_pfd2_396m", "step",
- "pll1_sw", "pll1_sys";
- arm-supply = <®_arm>;
- pu-supply = <®_pu>;
- soc-supply = <®_soc>;
- };
-
- cpu@1 {
- compatible = "arm,cortex-a9";
- device_type = "cpu";
- reg = <1>;
- next-level-cache = <&L2>;
- };
- };
-
- soc {
- ocram: sram@00900000 {
- compatible = "mmio-sram";
- reg = <0x00900000 0x20000>;
- clocks = <&clks 142>;
- };
-
- aips1: aips-bus@02000000 {
- iomuxc: iomuxc@020e0000 {
- compatible = "fsl,imx6dl-iomuxc";
- };
-
- pxp: pxp@020f0000 {
- reg = <0x020f0000 0x4000>;
- interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- epdc: epdc@020f4000 {
- reg = <0x020f4000 0x4000>;
- interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- lcdif: lcdif@020f8000 {
- reg = <0x020f8000 0x4000>;
- interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
-
- aips2: aips-bus@02100000 {
- i2c4: i2c@021f8000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx1-i2c";
- reg = <0x021f8000 0x4000>;
- interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
- };
- };
-};
-
-&ldb {
- clocks = <&clks 33>, <&clks 34>,
- <&clks 39>, <&clks 40>,
- <&clks 135>, <&clks 136>;
- clock-names = "di0_pll", "di1_pll",
- "di0_sel", "di1_sel",
- "di0", "di1";
-
- lvds-channel@0 {
- crtcs = <&ipu1 0>, <&ipu1 1>;
- };
-
- lvds-channel@1 {
- crtcs = <&ipu1 0>, <&ipu1 1>;
- };
-};
+#include <arm/imx6dl.dtsi>
diff --git a/arch/arm/dts/imx6q-pinfunc.h b/arch/arm/dts/imx6q-pinfunc.h
deleted file mode 100644
index 9fc6120..0000000
--- a/arch/arm/dts/imx6q-pinfunc.h
+++ /dev/null
@@ -1,1047 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __DTS_IMX6Q_PINFUNC_H
-#define __DTS_IMX6Q_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-#define MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x04c 0x360 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_DAT1__ECSPI5_SS0 0x04c 0x360 0x834 0x1 0x0
-#define MX6QDL_PAD_SD2_DAT1__EIM_CS2_B 0x04c 0x360 0x000 0x2 0x0
-#define MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x04c 0x360 0x7c8 0x3 0x0
-#define MX6QDL_PAD_SD2_DAT1__KEY_COL7 0x04c 0x360 0x8f0 0x4 0x0
-#define MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x04c 0x360 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x050 0x364 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_DAT2__ECSPI5_SS1 0x050 0x364 0x838 0x1 0x0
-#define MX6QDL_PAD_SD2_DAT2__EIM_CS3_B 0x050 0x364 0x000 0x2 0x0
-#define MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x050 0x364 0x7b8 0x3 0x0
-#define MX6QDL_PAD_SD2_DAT2__KEY_ROW6 0x050 0x364 0x8f8 0x4 0x0
-#define MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x050 0x364 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x054 0x368 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_DAT0__ECSPI5_MISO 0x054 0x368 0x82c 0x1 0x0
-#define MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x054 0x368 0x7b4 0x3 0x0
-#define MX6QDL_PAD_SD2_DAT0__KEY_ROW7 0x054 0x368 0x8fc 0x4 0x0
-#define MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x054 0x368 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_DAT0__DCIC2_OUT 0x054 0x368 0x000 0x6 0x0
-#define MX6QDL_PAD_RGMII_TXC__USB_H2_DATA 0x058 0x36c 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x058 0x36c 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TXC__SPDIF_EXT_CLK 0x058 0x36c 0x918 0x2 0x0
-#define MX6QDL_PAD_RGMII_TXC__GPIO6_IO19 0x058 0x36c 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M 0x058 0x36c 0x000 0x7 0x0
-#define MX6QDL_PAD_RGMII_TD0__HSI_TX_READY 0x05c 0x370 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x05c 0x370 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TD0__GPIO6_IO20 0x05c 0x370 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TD1__HSI_RX_FLAG 0x060 0x374 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x060 0x374 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x060 0x374 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TD2__HSI_RX_DATA 0x064 0x378 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x064 0x378 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TD2__GPIO6_IO22 0x064 0x378 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TD3__HSI_RX_WAKE 0x068 0x37c 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x068 0x37c 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x068 0x37c 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RX_CTL__USB_H3_DATA 0x06c 0x380 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x06c 0x380 0x858 0x1 0x0
-#define MX6QDL_PAD_RGMII_RX_CTL__GPIO6_IO24 0x06c 0x380 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RD0__HSI_RX_READY 0x070 0x384 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x070 0x384 0x848 0x1 0x0
-#define MX6QDL_PAD_RGMII_RD0__GPIO6_IO25 0x070 0x384 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x074 0x388 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x074 0x388 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26 0x074 0x388 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TX_CTL__ENET_REF_CLK 0x074 0x388 0x83c 0x7 0x0
-#define MX6QDL_PAD_RGMII_RD1__HSI_TX_FLAG 0x078 0x38c 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x078 0x38c 0x84c 0x1 0x0
-#define MX6QDL_PAD_RGMII_RD1__GPIO6_IO27 0x078 0x38c 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RD2__HSI_TX_DATA 0x07c 0x390 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x07c 0x390 0x850 0x1 0x0
-#define MX6QDL_PAD_RGMII_RD2__GPIO6_IO28 0x07c 0x390 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RD3__HSI_TX_WAKE 0x080 0x394 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x080 0x394 0x854 0x1 0x0
-#define MX6QDL_PAD_RGMII_RD3__GPIO6_IO29 0x080 0x394 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE 0x084 0x398 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x084 0x398 0x844 0x1 0x0
-#define MX6QDL_PAD_RGMII_RXC__GPIO6_IO30 0x084 0x398 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A25__EIM_ADDR25 0x088 0x39c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A25__ECSPI4_SS1 0x088 0x39c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A25__ECSPI2_RDY 0x088 0x39c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_A25__IPU1_DI1_PIN12 0x088 0x39c 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_A25__IPU1_DI0_D1_CS 0x088 0x39c 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x088 0x39c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x088 0x39c 0x88c 0x6 0x0
-#define MX6QDL_PAD_EIM_EB2__EIM_EB2_B 0x08c 0x3a0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_EB2__ECSPI1_SS0 0x08c 0x3a0 0x800 0x1 0x0
-#define MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19 0x08c 0x3a0 0x8d4 0x3 0x0
-#define MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x08c 0x3a0 0x890 0x4 0x0
-#define MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x08c 0x3a0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x08c 0x3a0 0x8a0 0x6 0x0
-#define MX6QDL_PAD_EIM_EB2__SRC_BOOT_CFG30 0x08c 0x3a0 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D16__EIM_DATA16 0x090 0x3a4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x090 0x3a4 0x7f4 0x1 0x0
-#define MX6QDL_PAD_EIM_D16__IPU1_DI0_PIN05 0x090 0x3a4 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18 0x090 0x3a4 0x8d0 0x3 0x0
-#define MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x090 0x3a4 0x894 0x4 0x0
-#define MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x090 0x3a4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D16__I2C2_SDA 0x090 0x3a4 0x8a4 0x6 0x0
-#define MX6QDL_PAD_EIM_D17__EIM_DATA17 0x094 0x3a8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x094 0x3a8 0x7f8 0x1 0x0
-#define MX6QDL_PAD_EIM_D17__IPU1_DI0_PIN06 0x094 0x3a8 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D17__IPU2_CSI1_PIXCLK 0x094 0x3a8 0x8e0 0x3 0x0
-#define MX6QDL_PAD_EIM_D17__DCIC1_OUT 0x094 0x3a8 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x094 0x3a8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D17__I2C3_SCL 0x094 0x3a8 0x8a8 0x6 0x0
-#define MX6QDL_PAD_EIM_D18__EIM_DATA18 0x098 0x3ac 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x098 0x3ac 0x7fc 0x1 0x0
-#define MX6QDL_PAD_EIM_D18__IPU1_DI0_PIN07 0x098 0x3ac 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17 0x098 0x3ac 0x8cc 0x3 0x0
-#define MX6QDL_PAD_EIM_D18__IPU1_DI1_D0_CS 0x098 0x3ac 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x098 0x3ac 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D18__I2C3_SDA 0x098 0x3ac 0x8ac 0x6 0x0
-#define MX6QDL_PAD_EIM_D19__EIM_DATA19 0x09c 0x3b0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D19__ECSPI1_SS1 0x09c 0x3b0 0x804 0x1 0x0
-#define MX6QDL_PAD_EIM_D19__IPU1_DI0_PIN08 0x09c 0x3b0 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16 0x09c 0x3b0 0x8c8 0x3 0x0
-#define MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x09c 0x3b0 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x09c 0x3b0 0x91c 0x4 0x0
-#define MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x09c 0x3b0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D19__EPIT1_OUT 0x09c 0x3b0 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D20__EIM_DATA20 0x0a0 0x3b4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D20__ECSPI4_SS0 0x0a0 0x3b4 0x824 0x1 0x0
-#define MX6QDL_PAD_EIM_D20__IPU1_DI0_PIN16 0x0a0 0x3b4 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15 0x0a0 0x3b4 0x8c4 0x3 0x0
-#define MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x0a0 0x3b4 0x91c 0x4 0x1
-#define MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x0a0 0x3b4 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x0a0 0x3b4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D20__EPIT2_OUT 0x0a0 0x3b4 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D21__EIM_DATA21 0x0a4 0x3b8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x0a4 0x3b8 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D21__IPU1_DI0_PIN17 0x0a4 0x3b8 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D21__IPU2_CSI1_DATA11 0x0a4 0x3b8 0x8b4 0x3 0x0
-#define MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x0a4 0x3b8 0x944 0x4 0x0
-#define MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x0a4 0x3b8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D21__I2C1_SCL 0x0a4 0x3b8 0x898 0x6 0x0
-#define MX6QDL_PAD_EIM_D21__SPDIF_IN 0x0a4 0x3b8 0x914 0x7 0x0
-#define MX6QDL_PAD_EIM_D22__EIM_DATA22 0x0a8 0x3bc 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x0a8 0x3bc 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D22__IPU1_DI0_PIN01 0x0a8 0x3bc 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D22__IPU2_CSI1_DATA10 0x0a8 0x3bc 0x8b0 0x3 0x0
-#define MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x0a8 0x3bc 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0a8 0x3bc 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D22__SPDIF_OUT 0x0a8 0x3bc 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D23__EIM_DATA23 0x0ac 0x3c0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D23__IPU1_DI0_D0_CS 0x0ac 0x3c0 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x0ac 0x3c0 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D23__UART3_RTS_B 0x0ac 0x3c0 0x92c 0x2 0x0
-#define MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x0ac 0x3c0 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_D23__IPU2_CSI1_DATA_EN 0x0ac 0x3c0 0x8d8 0x4 0x0
-#define MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x0ac 0x3c0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN02 0x0ac 0x3c0 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN14 0x0ac 0x3c0 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_EB3__EIM_EB3_B 0x0b0 0x3c4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_EB3__ECSPI4_RDY 0x0b0 0x3c4 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x0b0 0x3c4 0x92c 0x2 0x1
-#define MX6QDL_PAD_EIM_EB3__UART3_CTS_B 0x0b0 0x3c4 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_EB3__UART1_RI_B 0x0b0 0x3c4 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC 0x0b0 0x3c4 0x8dc 0x4 0x0
-#define MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x0b0 0x3c4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_EB3__IPU1_DI1_PIN03 0x0b0 0x3c4 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_EB3__SRC_BOOT_CFG31 0x0b0 0x3c4 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D24__EIM_DATA24 0x0b4 0x3c8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D24__ECSPI4_SS2 0x0b4 0x3c8 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x0b4 0x3c8 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D24__UART3_RX_DATA 0x0b4 0x3c8 0x930 0x2 0x0
-#define MX6QDL_PAD_EIM_D24__ECSPI1_SS2 0x0b4 0x3c8 0x808 0x3 0x0
-#define MX6QDL_PAD_EIM_D24__ECSPI2_SS2 0x0b4 0x3c8 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x0b4 0x3c8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D24__AUD5_RXFS 0x0b4 0x3c8 0x7d8 0x6 0x0
-#define MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x0b4 0x3c8 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D25__EIM_DATA25 0x0b8 0x3cc 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D25__ECSPI4_SS3 0x0b8 0x3cc 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x0b8 0x3cc 0x930 0x2 0x1
-#define MX6QDL_PAD_EIM_D25__UART3_TX_DATA 0x0b8 0x3cc 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D25__ECSPI1_SS3 0x0b8 0x3cc 0x80c 0x3 0x0
-#define MX6QDL_PAD_EIM_D25__ECSPI2_SS3 0x0b8 0x3cc 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x0b8 0x3cc 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D25__AUD5_RXC 0x0b8 0x3cc 0x7d4 0x6 0x0
-#define MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x0b8 0x3cc 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D26__EIM_DATA26 0x0bc 0x3d0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_DI1_PIN11 0x0bc 0x3d0 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_CSI0_DATA01 0x0bc 0x3d0 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14 0x0bc 0x3d0 0x8c0 0x3 0x0
-#define MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x0bc 0x3d0 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x0bc 0x3d0 0x928 0x4 0x0
-#define MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x0bc 0x3d0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_SISG2 0x0bc 0x3d0 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22 0x0bc 0x3d0 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D27__EIM_DATA27 0x0c0 0x3d4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_DI1_PIN13 0x0c0 0x3d4 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_CSI0_DATA00 0x0c0 0x3d4 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13 0x0c0 0x3d4 0x8bc 0x3 0x0
-#define MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x0c0 0x3d4 0x928 0x4 0x1
-#define MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x0c0 0x3d4 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x0c0 0x3d4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_SISG3 0x0c0 0x3d4 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23 0x0c0 0x3d4 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D28__EIM_DATA28 0x0c4 0x3d8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D28__I2C1_SDA 0x0c4 0x3d8 0x89c 0x1 0x0
-#define MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x0c4 0x3d8 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D28__IPU2_CSI1_DATA12 0x0c4 0x3d8 0x8b8 0x3 0x0
-#define MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x0c4 0x3d8 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D28__UART2_RTS_B 0x0c4 0x3d8 0x924 0x4 0x0
-#define MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x0c4 0x3d8 0x924 0x4 0x0
-#define MX6QDL_PAD_EIM_D28__UART2_DTE_RTS_B 0x0c4 0x3d8 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0c4 0x3d8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D28__IPU1_EXT_TRIG 0x0c4 0x3d8 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D28__IPU1_DI0_PIN13 0x0c4 0x3d8 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D29__EIM_DATA29 0x0c8 0x3dc 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D29__IPU1_DI1_PIN15 0x0c8 0x3dc 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D29__ECSPI4_SS0 0x0c8 0x3dc 0x824 0x2 0x1
-#define MX6QDL_PAD_EIM_D29__UART2_RTS_B 0x0c8 0x3dc 0x924 0x4 0x1
-#define MX6QDL_PAD_EIM_D29__UART2_CTS_B 0x0c8 0x3dc 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x0c8 0x3dc 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B 0x0c8 0x3dc 0x924 0x4 0x1
-#define MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x0c8 0x3dc 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC 0x0c8 0x3dc 0x8e4 0x6 0x0
-#define MX6QDL_PAD_EIM_D29__IPU1_DI0_PIN14 0x0c8 0x3dc 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D30__EIM_DATA30 0x0cc 0x3e0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21 0x0cc 0x3e0 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D30__IPU1_DI0_PIN11 0x0cc 0x3e0 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D30__IPU1_CSI0_DATA03 0x0cc 0x3e0 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x0cc 0x3e0 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D30__UART3_RTS_B 0x0cc 0x3e0 0x92c 0x4 0x2
-#define MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x0cc 0x3e0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D30__USB_H1_OC 0x0cc 0x3e0 0x948 0x6 0x0
-#define MX6QDL_PAD_EIM_D31__EIM_DATA31 0x0d0 0x3e4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20 0x0d0 0x3e4 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D31__IPU1_DI0_PIN12 0x0d0 0x3e4 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D31__IPU1_CSI0_DATA02 0x0d0 0x3e4 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x0d0 0x3e4 0x92c 0x4 0x3
-#define MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x0d0 0x3e4 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x0d0 0x3e4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D31__USB_H1_PWR 0x0d0 0x3e4 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_A24__EIM_ADDR24 0x0d4 0x3e8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19 0x0d4 0x3e8 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A24__IPU2_CSI1_DATA19 0x0d4 0x3e8 0x8d4 0x2 0x1
-#define MX6QDL_PAD_EIM_A24__IPU2_SISG2 0x0d4 0x3e8 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_A24__IPU1_SISG2 0x0d4 0x3e8 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x0d4 0x3e8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A24__SRC_BOOT_CFG24 0x0d4 0x3e8 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A23__EIM_ADDR23 0x0d8 0x3ec 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18 0x0d8 0x3ec 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A23__IPU2_CSI1_DATA18 0x0d8 0x3ec 0x8d0 0x2 0x1
-#define MX6QDL_PAD_EIM_A23__IPU2_SISG3 0x0d8 0x3ec 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_A23__IPU1_SISG3 0x0d8 0x3ec 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x0d8 0x3ec 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A23__SRC_BOOT_CFG23 0x0d8 0x3ec 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A22__EIM_ADDR22 0x0dc 0x3f0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17 0x0dc 0x3f0 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A22__IPU2_CSI1_DATA17 0x0dc 0x3f0 0x8cc 0x2 0x1
-#define MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x0dc 0x3f0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A22__SRC_BOOT_CFG22 0x0dc 0x3f0 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A21__EIM_ADDR21 0x0e0 0x3f4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16 0x0e0 0x3f4 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A21__IPU2_CSI1_DATA16 0x0e0 0x3f4 0x8c8 0x2 0x1
-#define MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x0e0 0x3f4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A21__SRC_BOOT_CFG21 0x0e0 0x3f4 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A20__EIM_ADDR20 0x0e4 0x3f8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15 0x0e4 0x3f8 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A20__IPU2_CSI1_DATA15 0x0e4 0x3f8 0x8c4 0x2 0x1
-#define MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x0e4 0x3f8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A20__SRC_BOOT_CFG20 0x0e4 0x3f8 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A19__EIM_ADDR19 0x0e8 0x3fc 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14 0x0e8 0x3fc 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A19__IPU2_CSI1_DATA14 0x0e8 0x3fc 0x8c0 0x2 0x1
-#define MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x0e8 0x3fc 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A19__SRC_BOOT_CFG19 0x0e8 0x3fc 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A18__EIM_ADDR18 0x0ec 0x400 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13 0x0ec 0x400 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A18__IPU2_CSI1_DATA13 0x0ec 0x400 0x8bc 0x2 0x1
-#define MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x0ec 0x400 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A18__SRC_BOOT_CFG18 0x0ec 0x400 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A17__EIM_ADDR17 0x0f0 0x404 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12 0x0f0 0x404 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12 0x0f0 0x404 0x8b8 0x2 0x1
-#define MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x0f0 0x404 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A17__SRC_BOOT_CFG17 0x0f0 0x404 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A16__EIM_ADDR16 0x0f4 0x408 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK 0x0f4 0x408 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK 0x0f4 0x408 0x8e0 0x2 0x1
-#define MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x0f4 0x408 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A16__SRC_BOOT_CFG16 0x0f4 0x408 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0x0f8 0x40c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_CS0__IPU1_DI1_PIN05 0x0f8 0x40c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x0f8 0x40c 0x810 0x2 0x0
-#define MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x0f8 0x40c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0x0fc 0x410 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_CS1__IPU1_DI1_PIN06 0x0fc 0x410 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x0fc 0x410 0x818 0x2 0x0
-#define MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x0fc 0x410 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_OE__EIM_OE_B 0x100 0x414 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_OE__IPU1_DI1_PIN07 0x100 0x414 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100 0x414 0x814 0x2 0x0
-#define MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x100 0x414 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_RW__EIM_RW 0x104 0x418 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_RW__IPU1_DI1_PIN08 0x104 0x418 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_RW__ECSPI2_SS0 0x104 0x418 0x81c 0x2 0x0
-#define MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x104 0x418 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_RW__SRC_BOOT_CFG29 0x104 0x418 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_LBA__EIM_LBA_B 0x108 0x41c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_LBA__IPU1_DI1_PIN17 0x108 0x41c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_LBA__ECSPI2_SS1 0x108 0x41c 0x820 0x2 0x0
-#define MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x108 0x41c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_LBA__SRC_BOOT_CFG26 0x108 0x41c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_EB0__EIM_EB0_B 0x10c 0x420 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11 0x10c 0x420 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_EB0__IPU2_CSI1_DATA11 0x10c 0x420 0x8b4 0x2 0x1
-#define MX6QDL_PAD_EIM_EB0__CCM_PMIC_READY 0x10c 0x420 0x7f0 0x4 0x0
-#define MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x10c 0x420 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_EB0__SRC_BOOT_CFG27 0x10c 0x420 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_EB1__EIM_EB1_B 0x110 0x424 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10 0x110 0x424 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_EB1__IPU2_CSI1_DATA10 0x110 0x424 0x8b0 0x2 0x1
-#define MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x110 0x424 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_EB1__SRC_BOOT_CFG28 0x110 0x424 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA0__EIM_AD00 0x114 0x428 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09 0x114 0x428 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA0__IPU2_CSI1_DATA09 0x114 0x428 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x114 0x428 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA0__SRC_BOOT_CFG00 0x114 0x428 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA1__EIM_AD01 0x118 0x42c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08 0x118 0x42c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA1__IPU2_CSI1_DATA08 0x118 0x42c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x118 0x42c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA1__SRC_BOOT_CFG01 0x118 0x42c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA2__EIM_AD02 0x11c 0x430 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07 0x11c 0x430 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA2__IPU2_CSI1_DATA07 0x11c 0x430 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x11c 0x430 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA2__SRC_BOOT_CFG02 0x11c 0x430 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA3__EIM_AD03 0x120 0x434 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06 0x120 0x434 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA3__IPU2_CSI1_DATA06 0x120 0x434 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x120 0x434 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA3__SRC_BOOT_CFG03 0x120 0x434 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA4__EIM_AD04 0x124 0x438 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05 0x124 0x438 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA4__IPU2_CSI1_DATA05 0x124 0x438 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x124 0x438 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA4__SRC_BOOT_CFG04 0x124 0x438 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA5__EIM_AD05 0x128 0x43c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04 0x128 0x43c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA5__IPU2_CSI1_DATA04 0x128 0x43c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x128 0x43c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA5__SRC_BOOT_CFG05 0x128 0x43c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA6__EIM_AD06 0x12c 0x440 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03 0x12c 0x440 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA6__IPU2_CSI1_DATA03 0x12c 0x440 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x12c 0x440 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA6__SRC_BOOT_CFG06 0x12c 0x440 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA7__EIM_AD07 0x130 0x444 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02 0x130 0x444 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA7__IPU2_CSI1_DATA02 0x130 0x444 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x130 0x444 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA7__SRC_BOOT_CFG07 0x130 0x444 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA8__EIM_AD08 0x134 0x448 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01 0x134 0x448 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA8__IPU2_CSI1_DATA01 0x134 0x448 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x134 0x448 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA8__SRC_BOOT_CFG08 0x134 0x448 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA9__EIM_AD09 0x138 0x44c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00 0x138 0x44c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA9__IPU2_CSI1_DATA00 0x138 0x44c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x138 0x44c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA9__SRC_BOOT_CFG09 0x138 0x44c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA10__EIM_AD10 0x13c 0x450 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15 0x13c 0x450 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA10__IPU2_CSI1_DATA_EN 0x13c 0x450 0x8d8 0x2 0x1
-#define MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x13c 0x450 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA10__SRC_BOOT_CFG10 0x13c 0x450 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA11__EIM_AD11 0x140 0x454 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02 0x140 0x454 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA11__IPU2_CSI1_HSYNC 0x140 0x454 0x8dc 0x2 0x1
-#define MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x140 0x454 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA11__SRC_BOOT_CFG11 0x140 0x454 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA12__EIM_AD12 0x144 0x458 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03 0x144 0x458 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA12__IPU2_CSI1_VSYNC 0x144 0x458 0x8e4 0x2 0x1
-#define MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x144 0x458 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA12__SRC_BOOT_CFG12 0x144 0x458 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA13__EIM_AD13 0x148 0x45c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA13__IPU1_DI1_D0_CS 0x148 0x45c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x148 0x45c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA13__SRC_BOOT_CFG13 0x148 0x45c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA14__EIM_AD14 0x14c 0x460 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA14__IPU1_DI1_D1_CS 0x14c 0x460 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x14c 0x460 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA14__SRC_BOOT_CFG14 0x14c 0x460 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA15__EIM_AD15 0x150 0x464 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN01 0x150 0x464 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN04 0x150 0x464 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x150 0x464 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA15__SRC_BOOT_CFG15 0x150 0x464 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0x154 0x468 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_WAIT__EIM_DTACK_B 0x154 0x468 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x154 0x468 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_WAIT__SRC_BOOT_CFG25 0x154 0x468 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_BCLK__EIM_BCLK 0x158 0x46c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_BCLK__IPU1_DI1_PIN16 0x158 0x46c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x158 0x46c 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x15c 0x470 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0x15c 0x470 0x000 0x1 0x0
-#define MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x15c 0x470 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x160 0x474 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15 0x160 0x474 0x000 0x1 0x0
-#define MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x160 0x474 0x000 0x2 0x0
-#define MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x160 0x474 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x164 0x478 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02 0x164 0x478 0x000 0x1 0x0
-#define MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x164 0x478 0x000 0x2 0x0
-#define MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x164 0x478 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x168 0x47c 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03 0x168 0x47c 0x000 0x1 0x0
-#define MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x168 0x47c 0x000 0x2 0x0
-#define MX6QDL_PAD_DI0_PIN3__GPIO4_IO19 0x168 0x47c 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04 0x16c 0x480 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_PIN4__IPU2_DI0_PIN04 0x16c 0x480 0x000 0x1 0x0
-#define MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x16c 0x480 0x000 0x2 0x0
-#define MX6QDL_PAD_DI0_PIN4__SD1_WP 0x16c 0x480 0x94c 0x3 0x0
-#define MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x16c 0x480 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x170 0x484 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00 0x170 0x484 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x170 0x484 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x170 0x484 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x174 0x488 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01 0x174 0x488 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x174 0x488 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22 0x174 0x488 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x178 0x48c 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02 0x178 0x48c 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x178 0x48c 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23 0x178 0x48c 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x17c 0x490 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03 0x17c 0x490 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT3__ECSPI3_SS0 0x17c 0x490 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x17c 0x490 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x180 0x494 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04 0x180 0x494 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT4__ECSPI3_SS1 0x180 0x494 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x180 0x494 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x184 0x498 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05 0x184 0x498 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT5__ECSPI3_SS2 0x184 0x498 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT5__AUD6_RXFS 0x184 0x498 0x000 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x184 0x498 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x188 0x49c 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06 0x188 0x49c 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT6__ECSPI3_SS3 0x188 0x49c 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT6__AUD6_RXC 0x188 0x49c 0x000 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x188 0x49c 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x18c 0x4a0 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07 0x18c 0x4a0 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT7__ECSPI3_RDY 0x18c 0x4a0 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x18c 0x4a0 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x190 0x4a4 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08 0x190 0x4a4 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x190 0x4a4 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x190 0x4a4 0x000 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29 0x190 0x4a4 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x194 0x4a8 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09 0x194 0x4a8 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x194 0x4a8 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT9__WDOG2_B 0x194 0x4a8 0x000 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x194 0x4a8 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x198 0x4ac 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10 0x198 0x4ac 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x198 0x4ac 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x19c 0x4b0 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11 0x19c 0x4b0 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x19c 0x4b0 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x1a0 0x4b4 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12 0x1a0 0x4b4 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06 0x1a0 0x4b4 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x1a4 0x4b8 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13 0x1a4 0x4b8 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT13__AUD5_RXFS 0x1a4 0x4b8 0x7d8 0x3 0x1
-#define MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x1a4 0x4b8 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x1a8 0x4bc 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14 0x1a8 0x4bc 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT14__AUD5_RXC 0x1a8 0x4bc 0x7d4 0x3 0x1
-#define MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x1a8 0x4bc 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x1ac 0x4c0 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15 0x1ac 0x4c0 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT15__ECSPI1_SS1 0x1ac 0x4c0 0x804 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT15__ECSPI2_SS1 0x1ac 0x4c0 0x820 0x3 0x1
-#define MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1ac 0x4c0 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x1b0 0x4c4 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT16__IPU2_DISP0_DATA16 0x1b0 0x4c4 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x1b0 0x4c4 0x818 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT16__AUD5_TXC 0x1b0 0x4c4 0x7dc 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT16__SDMA_EXT_EVENT0 0x1b0 0x4c4 0x90c 0x4 0x0
-#define MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x1b0 0x4c4 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x1b4 0x4c8 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT17__IPU2_DISP0_DATA17 0x1b4 0x4c8 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO 0x1b4 0x4c8 0x814 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT17__AUD5_TXD 0x1b4 0x4c8 0x7d0 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT17__SDMA_EXT_EVENT1 0x1b4 0x4c8 0x910 0x4 0x0
-#define MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x1b4 0x4c8 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x1b8 0x4cc 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT18__IPU2_DISP0_DATA18 0x1b8 0x4cc 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT18__ECSPI2_SS0 0x1b8 0x4cc 0x81c 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS 0x1b8 0x4cc 0x7e0 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT18__AUD4_RXFS 0x1b8 0x4cc 0x7c0 0x4 0x0
-#define MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b8 0x4cc 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT18__EIM_CS2_B 0x1b8 0x4cc 0x000 0x7 0x0
-#define MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x1bc 0x4d0 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT19__IPU2_DISP0_DATA19 0x1bc 0x4d0 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x1bc 0x4d0 0x810 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x1bc 0x4d0 0x7cc 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT19__AUD4_RXC 0x1bc 0x4d0 0x7bc 0x4 0x0
-#define MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1bc 0x4d0 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT19__EIM_CS3_B 0x1bc 0x4d0 0x000 0x7 0x0
-#define MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x1c0 0x4d4 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT20__IPU2_DISP0_DATA20 0x1c0 0x4d4 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT20__ECSPI1_SCLK 0x1c0 0x4d4 0x7f4 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x1c0 0x4d4 0x7c4 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1c0 0x4d4 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x1c4 0x4d8 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT21__IPU2_DISP0_DATA21 0x1c4 0x4d8 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT21__ECSPI1_MOSI 0x1c4 0x4d8 0x7fc 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x1c4 0x4d8 0x7b8 0x3 0x1
-#define MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1c4 0x4d8 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x1c8 0x4dc 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT22__IPU2_DISP0_DATA22 0x1c8 0x4dc 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT22__ECSPI1_MISO 0x1c8 0x4dc 0x7f8 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x1c8 0x4dc 0x7c8 0x3 0x1
-#define MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1c8 0x4dc 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x1cc 0x4e0 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT23__IPU2_DISP0_DATA23 0x1cc 0x4e0 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT23__ECSPI1_SS0 0x1cc 0x4e0 0x800 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x1cc 0x4e0 0x7b4 0x3 0x1
-#define MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1cc 0x4e0 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1d0 0x4e4 0x840 0x1 0x0
-#define MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK 0x1d0 0x4e4 0x86c 0x2 0x0
-#define MX6QDL_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT 0x1d0 0x4e4 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_MDIO__GPIO1_IO22 0x1d0 0x4e4 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_MDIO__SPDIF_LOCK 0x1d0 0x4e4 0x000 0x6 0x0
-#define MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1d4 0x4e8 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_REF_CLK__ESAI_RX_FS 0x1d4 0x4e8 0x85c 0x2 0x0
-#define MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1d4 0x4e8 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_REF_CLK__SPDIF_SR_CLK 0x1d4 0x4e8 0x000 0x6 0x0
-#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1d8 0x4ec 0x004 0x0 0xff0d0100
-#define MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1d8 0x4ec 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK 0x1d8 0x4ec 0x864 0x2 0x0
-#define MX6QDL_PAD_ENET_RX_ER__SPDIF_IN 0x1d8 0x4ec 0x914 0x3 0x1
-#define MX6QDL_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1d8 0x4ec 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x1d8 0x4ec 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1dc 0x4f0 0x858 0x1 0x1
-#define MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1dc 0x4f0 0x870 0x2 0x0
-#define MX6QDL_PAD_ENET_CRS_DV__SPDIF_EXT_CLK 0x1dc 0x4f0 0x918 0x3 0x1
-#define MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1dc 0x4f0 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_RXD1__MLB_SIG 0x1e0 0x4f4 0x908 0x0 0x0
-#define MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1e0 0x4f4 0x84c 0x1 0x1
-#define MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS 0x1e0 0x4f4 0x860 0x2 0x0
-#define MX6QDL_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT 0x1e0 0x4f4 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1e0 0x4f4 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1e4 0x4f8 0x848 0x1 0x1
-#define MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK 0x1e4 0x4f8 0x868 0x2 0x0
-#define MX6QDL_PAD_ENET_RXD0__SPDIF_OUT 0x1e4 0x4f8 0x000 0x3 0x0
-#define MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1e4 0x4f8 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1e8 0x4fc 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1e8 0x4fc 0x880 0x2 0x0
-#define MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1e8 0x4fc 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_TXD1__MLB_CLK 0x1ec 0x500 0x900 0x0 0x0
-#define MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1ec 0x500 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_TXD1__ESAI_TX2_RX3 0x1ec 0x500 0x87c 0x2 0x0
-#define MX6QDL_PAD_ENET_TXD1__ENET_1588_EVENT0_IN 0x1ec 0x500 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1ec 0x500 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1f0 0x504 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1 0x1f0 0x504 0x884 0x2 0x0
-#define MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1f0 0x504 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_MDC__MLB_DATA 0x1f4 0x508 0x904 0x0 0x0
-#define MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1f4 0x508 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0 0x1f4 0x508 0x888 0x2 0x0
-#define MX6QDL_PAD_ENET_MDC__ENET_1588_EVENT1_IN 0x1f4 0x508 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_MDC__GPIO1_IO31 0x1f4 0x508 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x1f8 0x5c8 0x7f4 0x0 0x2
-#define MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3 0x1f8 0x5c8 0x854 0x1 0x1
-#define MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x1f8 0x5c8 0x7dc 0x2 0x1
-#define MX6QDL_PAD_KEY_COL0__KEY_COL0 0x1f8 0x5c8 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1f8 0x5c8 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_COL0__UART4_RX_DATA 0x1f8 0x5c8 0x938 0x4 0x0
-#define MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1f8 0x5c8 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL0__DCIC1_OUT 0x1f8 0x5c8 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x1fc 0x5cc 0x7fc 0x0 0x2
-#define MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3 0x1fc 0x5cc 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x1fc 0x5cc 0x7d0 0x2 0x1
-#define MX6QDL_PAD_KEY_ROW0__KEY_ROW0 0x1fc 0x5cc 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1fc 0x5cc 0x938 0x4 0x1
-#define MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA 0x1fc 0x5cc 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1fc 0x5cc 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW0__DCIC2_OUT 0x1fc 0x5cc 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x200 0x5d0 0x7f8 0x0 0x2
-#define MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x200 0x5d0 0x840 0x1 0x1
-#define MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x200 0x5d0 0x7e0 0x2 0x1
-#define MX6QDL_PAD_KEY_COL1__KEY_COL1 0x200 0x5d0 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x200 0x5d0 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_COL1__UART5_RX_DATA 0x200 0x5d0 0x940 0x4 0x0
-#define MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x200 0x5d0 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL1__SD1_VSELECT 0x200 0x5d0 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0 0x204 0x5d4 0x800 0x0 0x2
-#define MX6QDL_PAD_KEY_ROW1__ENET_COL 0x204 0x5d4 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW1__AUD5_RXD 0x204 0x5d4 0x7cc 0x2 0x1
-#define MX6QDL_PAD_KEY_ROW1__KEY_ROW1 0x204 0x5d4 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x204 0x5d4 0x940 0x4 0x1
-#define MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA 0x204 0x5d4 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x204 0x5d4 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x204 0x5d4 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_COL2__ECSPI1_SS1 0x208 0x5d8 0x804 0x0 0x2
-#define MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2 0x208 0x5d8 0x850 0x1 0x1
-#define MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x208 0x5d8 0x000 0x2 0x0
-#define MX6QDL_PAD_KEY_COL2__KEY_COL2 0x208 0x5d8 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL2__ENET_MDC 0x208 0x5d8 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x208 0x5d8 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE 0x208 0x5d8 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_ROW2__ECSPI1_SS2 0x20c 0x5dc 0x808 0x0 0x1
-#define MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2 0x20c 0x5dc 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x20c 0x5dc 0x7e4 0x2 0x0
-#define MX6QDL_PAD_KEY_ROW2__KEY_ROW2 0x20c 0x5dc 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW2__SD2_VSELECT 0x20c 0x5dc 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x20c 0x5dc 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x20c 0x5dc 0x88c 0x6 0x1
-#define MX6QDL_PAD_KEY_COL3__ECSPI1_SS3 0x210 0x5e0 0x80c 0x0 0x1
-#define MX6QDL_PAD_KEY_COL3__ENET_CRS 0x210 0x5e0 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x210 0x5e0 0x890 0x2 0x1
-#define MX6QDL_PAD_KEY_COL3__KEY_COL3 0x210 0x5e0 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x210 0x5e0 0x8a0 0x4 0x1
-#define MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x210 0x5e0 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x210 0x5e0 0x914 0x6 0x2
-#define MX6QDL_PAD_KEY_ROW3__ASRC_EXT_CLK 0x214 0x5e4 0x7b0 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x214 0x5e4 0x894 0x2 0x1
-#define MX6QDL_PAD_KEY_ROW3__KEY_ROW3 0x214 0x5e4 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x214 0x5e4 0x8a4 0x4 0x1
-#define MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x214 0x5e4 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW3__SD1_VSELECT 0x214 0x5e4 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x218 0x5e8 0x000 0x0 0x0
-#define MX6QDL_PAD_KEY_COL4__IPU1_SISG4 0x218 0x5e8 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x218 0x5e8 0x944 0x2 0x1
-#define MX6QDL_PAD_KEY_COL4__KEY_COL4 0x218 0x5e8 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL4__UART5_RTS_B 0x218 0x5e8 0x93c 0x4 0x0
-#define MX6QDL_PAD_KEY_COL4__UART5_CTS_B 0x218 0x5e8 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x218 0x5e8 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x21c 0x5ec 0x7e8 0x0 0x0
-#define MX6QDL_PAD_KEY_ROW4__IPU1_SISG5 0x21c 0x5ec 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR 0x21c 0x5ec 0x000 0x2 0x0
-#define MX6QDL_PAD_KEY_ROW4__KEY_ROW4 0x21c 0x5ec 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW4__UART5_CTS_B 0x21c 0x5ec 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_ROW4__UART5_RTS_B 0x21c 0x5ec 0x93c 0x4 0x1
-#define MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x21c 0x5ec 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x220 0x5f0 0x000 0x0 0x0
-#define MX6QDL_PAD_GPIO_0__KEY_COL5 0x220 0x5f0 0x8e8 0x2 0x0
-#define MX6QDL_PAD_GPIO_0__ASRC_EXT_CLK 0x220 0x5f0 0x7b0 0x3 0x1
-#define MX6QDL_PAD_GPIO_0__EPIT1_OUT 0x220 0x5f0 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x220 0x5f0 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x220 0x5f0 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_0__SNVS_VIO_5 0x220 0x5f0 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_1__ESAI_RX_CLK 0x224 0x5f4 0x86c 0x0 0x1
-#define MX6QDL_PAD_GPIO_1__WDOG2_B 0x224 0x5f4 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_1__KEY_ROW5 0x224 0x5f4 0x8f4 0x2 0x0
-#define MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x224 0x5f4 0x004 0x3 0xff0d0101
-#define MX6QDL_PAD_GPIO_1__PWM2_OUT 0x224 0x5f4 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x224 0x5f4 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_1__SD1_CD_B 0x224 0x5f4 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_9__ESAI_RX_FS 0x228 0x5f8 0x85c 0x0 0x1
-#define MX6QDL_PAD_GPIO_9__WDOG1_B 0x228 0x5f8 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_9__KEY_COL6 0x228 0x5f8 0x8ec 0x2 0x0
-#define MX6QDL_PAD_GPIO_9__CCM_REF_EN_B 0x228 0x5f8 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_9__PWM1_OUT 0x228 0x5f8 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x228 0x5f8 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_9__SD1_WP 0x228 0x5f8 0x94c 0x6 0x1
-#define MX6QDL_PAD_GPIO_3__ESAI_RX_HF_CLK 0x22c 0x5fc 0x864 0x0 0x1
-#define MX6QDL_PAD_GPIO_3__I2C3_SCL 0x22c 0x5fc 0x8a8 0x2 0x1
-#define MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M 0x22c 0x5fc 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_3__CCM_CLKO2 0x22c 0x5fc 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x22c 0x5fc 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_3__USB_H1_OC 0x22c 0x5fc 0x948 0x6 0x1
-#define MX6QDL_PAD_GPIO_3__MLB_CLK 0x22c 0x5fc 0x900 0x7 0x1
-#define MX6QDL_PAD_GPIO_6__ESAI_TX_CLK 0x230 0x600 0x870 0x0 0x1
-#define MX6QDL_PAD_GPIO_6__ENET_IRQ 0x230 0x600 0x03c 0x11 0xff000609
-#define MX6QDL_PAD_GPIO_6__I2C3_SDA 0x230 0x600 0x8ac 0x2 0x1
-#define MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x230 0x600 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_6__SD2_LCTL 0x230 0x600 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_6__MLB_SIG 0x230 0x600 0x908 0x7 0x1
-#define MX6QDL_PAD_GPIO_2__ESAI_TX_FS 0x234 0x604 0x860 0x0 0x1
-#define MX6QDL_PAD_GPIO_2__KEY_ROW6 0x234 0x604 0x8f8 0x2 0x1
-#define MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x234 0x604 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_2__SD2_WP 0x234 0x604 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_2__MLB_DATA 0x234 0x604 0x904 0x7 0x1
-#define MX6QDL_PAD_GPIO_4__ESAI_TX_HF_CLK 0x238 0x608 0x868 0x0 0x1
-#define MX6QDL_PAD_GPIO_4__KEY_COL7 0x238 0x608 0x8f0 0x2 0x1
-#define MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x238 0x608 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_4__SD2_CD_B 0x238 0x608 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3 0x23c 0x60c 0x87c 0x0 0x1
-#define MX6QDL_PAD_GPIO_5__KEY_ROW7 0x23c 0x60c 0x8fc 0x2 0x1
-#define MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x23c 0x60c 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x23c 0x60c 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_5__I2C3_SCL 0x23c 0x60c 0x8a8 0x6 0x2
-#define MX6QDL_PAD_GPIO_5__ARM_EVENTI 0x23c 0x60c 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_7__ESAI_TX4_RX1 0x240 0x610 0x884 0x0 0x1
-#define MX6QDL_PAD_GPIO_7__ECSPI5_RDY 0x240 0x610 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_7__EPIT1_OUT 0x240 0x610 0x000 0x2 0x0
-#define MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x240 0x610 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x240 0x610 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_7__UART2_RX_DATA 0x240 0x610 0x928 0x4 0x2
-#define MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x240 0x610 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_7__SPDIF_LOCK 0x240 0x610 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_7__USB_OTG_HOST_MODE 0x240 0x610 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_8__ESAI_TX5_RX0 0x244 0x614 0x888 0x0 0x1
-#define MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K 0x244 0x614 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_8__EPIT2_OUT 0x244 0x614 0x000 0x2 0x0
-#define MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x244 0x614 0x7e4 0x3 0x1
-#define MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x244 0x614 0x928 0x4 0x3
-#define MX6QDL_PAD_GPIO_8__UART2_TX_DATA 0x244 0x614 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x244 0x614 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_8__SPDIF_SR_CLK 0x244 0x614 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE 0x244 0x614 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_16__ESAI_TX3_RX2 0x248 0x618 0x880 0x0 0x1
-#define MX6QDL_PAD_GPIO_16__ENET_1588_EVENT2_IN 0x248 0x618 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x248 0x618 0x83c 0x2 0x1
-#define MX6QDL_PAD_GPIO_16__SD1_LCTL 0x248 0x618 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_16__SPDIF_IN 0x248 0x618 0x914 0x4 0x3
-#define MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x248 0x618 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_16__I2C3_SDA 0x248 0x618 0x8ac 0x6 0x2
-#define MX6QDL_PAD_GPIO_16__JTAG_DE_B 0x248 0x618 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_17__ESAI_TX0 0x24c 0x61c 0x874 0x0 0x0
-#define MX6QDL_PAD_GPIO_17__ENET_1588_EVENT3_IN 0x24c 0x61c 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_17__CCM_PMIC_READY 0x24c 0x61c 0x7f0 0x2 0x1
-#define MX6QDL_PAD_GPIO_17__SDMA_EXT_EVENT0 0x24c 0x61c 0x90c 0x3 0x1
-#define MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x24c 0x61c 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x24c 0x61c 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_18__ESAI_TX1 0x250 0x620 0x878 0x0 0x0
-#define MX6QDL_PAD_GPIO_18__ENET_RX_CLK 0x250 0x620 0x844 0x1 0x1
-#define MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x250 0x620 0x000 0x2 0x0
-#define MX6QDL_PAD_GPIO_18__SDMA_EXT_EVENT1 0x250 0x620 0x910 0x3 0x1
-#define MX6QDL_PAD_GPIO_18__ASRC_EXT_CLK 0x250 0x620 0x7b0 0x4 0x2
-#define MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x250 0x620 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_18__SNVS_VIO_5_CTL 0x250 0x620 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_19__KEY_COL5 0x254 0x624 0x8e8 0x0 0x1
-#define MX6QDL_PAD_GPIO_19__ENET_1588_EVENT0_OUT 0x254 0x624 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x254 0x624 0x000 0x2 0x0
-#define MX6QDL_PAD_GPIO_19__CCM_CLKO1 0x254 0x624 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_19__ECSPI1_RDY 0x254 0x624 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x254 0x624 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_19__ENET_TX_ER 0x254 0x624 0x000 0x6 0x0
-#define MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x258 0x628 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x258 0x628 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO 0x258 0x628 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x25c 0x62c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x25c 0x62c 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x25c 0x62c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL 0x25c 0x62c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x260 0x630 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x260 0x630 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x260 0x630 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK 0x260 0x630 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x264 0x634 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x264 0x634 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x264 0x634 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00 0x264 0x634 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04 0x268 0x638 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x268 0x638 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x268 0x638 0x7f4 0x2 0x3
-#define MX6QDL_PAD_CSI0_DAT4__KEY_COL5 0x268 0x638 0x8e8 0x3 0x2
-#define MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x268 0x638 0x000 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22 0x268 0x638 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01 0x268 0x638 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05 0x26c 0x63c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x26c 0x63c 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x26c 0x63c 0x7fc 0x2 0x3
-#define MX6QDL_PAD_CSI0_DAT5__KEY_ROW5 0x26c 0x63c 0x8f4 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x26c 0x63c 0x000 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x26c 0x63c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02 0x26c 0x63c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06 0x270 0x640 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x270 0x640 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x270 0x640 0x7f8 0x2 0x3
-#define MX6QDL_PAD_CSI0_DAT6__KEY_COL6 0x270 0x640 0x8ec 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x270 0x640 0x000 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24 0x270 0x640 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03 0x270 0x640 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07 0x274 0x644 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x274 0x644 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT7__ECSPI1_SS0 0x274 0x644 0x800 0x2 0x3
-#define MX6QDL_PAD_CSI0_DAT7__KEY_ROW6 0x274 0x644 0x8f8 0x3 0x2
-#define MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x274 0x644 0x000 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x274 0x644 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04 0x274 0x644 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08 0x278 0x648 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x278 0x648 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK 0x278 0x648 0x810 0x2 0x2
-#define MX6QDL_PAD_CSI0_DAT8__KEY_COL7 0x278 0x648 0x8f0 0x3 0x2
-#define MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x278 0x648 0x89c 0x4 0x1
-#define MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x278 0x648 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05 0x278 0x648 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09 0x27c 0x64c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x27c 0x64c 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI 0x27c 0x64c 0x818 0x2 0x2
-#define MX6QDL_PAD_CSI0_DAT9__KEY_ROW7 0x27c 0x64c 0x8fc 0x3 0x2
-#define MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x27c 0x64c 0x898 0x4 0x1
-#define MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x27c 0x64c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06 0x27c 0x64c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 0x280 0x650 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT10__AUD3_RXC 0x280 0x650 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO 0x280 0x650 0x814 0x2 0x2
-#define MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x280 0x650 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x280 0x650 0x920 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28 0x280 0x650 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07 0x280 0x650 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 0x284 0x654 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT11__AUD3_RXFS 0x284 0x654 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT11__ECSPI2_SS0 0x284 0x654 0x81c 0x2 0x2
-#define MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x284 0x654 0x920 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x284 0x654 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x284 0x654 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08 0x284 0x654 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x288 0x658 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x288 0x658 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x288 0x658 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT12__UART4_RX_DATA 0x288 0x658 0x938 0x3 0x2
-#define MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x288 0x658 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09 0x288 0x658 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x28c 0x65c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x28c 0x65c 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x28c 0x65c 0x938 0x3 0x3
-#define MX6QDL_PAD_CSI0_DAT13__UART4_TX_DATA 0x28c 0x65c 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x28c 0x65c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10 0x28c 0x65c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x290 0x660 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x290 0x660 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x290 0x660 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT14__UART5_RX_DATA 0x290 0x660 0x940 0x3 0x2
-#define MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x290 0x660 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11 0x290 0x660 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x294 0x664 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x294 0x664 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x294 0x664 0x940 0x3 0x3
-#define MX6QDL_PAD_CSI0_DAT15__UART5_TX_DATA 0x294 0x664 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01 0x294 0x664 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12 0x294 0x664 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x298 0x668 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x298 0x668 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x298 0x668 0x934 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT16__UART4_CTS_B 0x298 0x668 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02 0x298 0x668 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13 0x298 0x668 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x29c 0x66c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x29c 0x66c 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x29c 0x66c 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT17__UART4_RTS_B 0x29c 0x66c 0x934 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x29c 0x66c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14 0x29c 0x66c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x2a0 0x670 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x2a0 0x670 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B 0x2a0 0x670 0x93c 0x3 0x2
-#define MX6QDL_PAD_CSI0_DAT18__UART5_CTS_B 0x2a0 0x670 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04 0x2a0 0x670 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15 0x2a0 0x670 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x2a4 0x674 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x2a4 0x674 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x2a4 0x674 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT19__UART5_RTS_B 0x2a4 0x674 0x93c 0x3 0x3
-#define MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x2a4 0x674 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x2a8 0x690 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x2a8 0x690 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT7__UART1_RX_DATA 0x2a8 0x690 0x920 0x1 0x2
-#define MX6QDL_PAD_SD3_DAT7__GPIO6_IO17 0x2a8 0x690 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x2ac 0x694 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x2ac 0x694 0x920 0x1 0x3
-#define MX6QDL_PAD_SD3_DAT6__UART1_TX_DATA 0x2ac 0x694 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x2ac 0x694 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x2b0 0x698 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x2b0 0x698 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT5__UART2_RX_DATA 0x2b0 0x698 0x928 0x1 0x4
-#define MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x2b0 0x698 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x2b4 0x69c 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x2b4 0x69c 0x928 0x1 0x5
-#define MX6QDL_PAD_SD3_DAT4__UART2_TX_DATA 0x2b4 0x69c 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x2b4 0x69c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_CMD__SD3_CMD 0x2b8 0x6a0 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_CMD__UART2_CTS_B 0x2b8 0x6a0 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_CMD__UART2_RTS_B 0x2b8 0x6a0 0x924 0x1 0x2
-#define MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x2b8 0x6a0 0x000 0x2 0x0
-#define MX6QDL_PAD_SD3_CMD__GPIO7_IO02 0x2b8 0x6a0 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_CLK__SD3_CLK 0x2bc 0x6a4 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_CLK__UART2_RTS_B 0x2bc 0x6a4 0x924 0x1 0x3
-#define MX6QDL_PAD_SD3_CLK__UART2_CTS_B 0x2bc 0x6a4 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x2bc 0x6a4 0x7e4 0x2 0x2
-#define MX6QDL_PAD_SD3_CLK__GPIO7_IO03 0x2bc 0x6a4 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x2c0 0x6a8 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT0__UART1_CTS_B 0x2c0 0x6a8 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT0__UART1_RTS_B 0x2c0 0x6a8 0x91c 0x1 0x2
-#define MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x2c0 0x6a8 0x000 0x2 0x0
-#define MX6QDL_PAD_SD3_DAT0__GPIO7_IO04 0x2c0 0x6a8 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x2c4 0x6ac 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT1__UART1_RTS_B 0x2c4 0x6ac 0x91c 0x1 0x3
-#define MX6QDL_PAD_SD3_DAT1__UART1_CTS_B 0x2c4 0x6ac 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x2c4 0x6ac 0x7e8 0x2 0x1
-#define MX6QDL_PAD_SD3_DAT1__GPIO7_IO05 0x2c4 0x6ac 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x2c8 0x6b0 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x2c8 0x6b0 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x2cc 0x6b4 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT3__UART3_CTS_B 0x2cc 0x6b4 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT3__UART3_RTS_B 0x2cc 0x6b4 0x92c 0x1 0x4
-#define MX6QDL_PAD_SD3_DAT3__GPIO7_IO07 0x2cc 0x6b4 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_RST__SD3_RESET 0x2d0 0x6b8 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_RST__UART3_RTS_B 0x2d0 0x6b8 0x92c 0x1 0x5
-#define MX6QDL_PAD_SD3_RST__UART3_CTS_B 0x2d0 0x6b8 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x2d0 0x6b8 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CLE__NAND_CLE 0x2d4 0x6bc 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CLE__IPU2_SISG4 0x2d4 0x6bc 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x2d4 0x6bc 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_ALE__NAND_ALE 0x2d8 0x6c0 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x2d8 0x6c0 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x2d8 0x6c0 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0x2dc 0x6c4 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_WP_B__IPU2_SISG5 0x2dc 0x6c4 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x2dc 0x6c4 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0x2e0 0x6c8 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_RB0__IPU2_DI0_PIN01 0x2e0 0x6c8 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x2e0 0x6c8 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0x2e4 0x6cc 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x2e4 0x6cc 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0x2e8 0x6d0 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CS1__SD4_VSELECT 0x2e8 0x6d0 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x2e8 0x6d0 0x000 0x2 0x0
-#define MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x2e8 0x6d0 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS2__NAND_CE2_B 0x2ec 0x6d4 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CS2__IPU1_SISG0 0x2ec 0x6d4 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_CS2__ESAI_TX0 0x2ec 0x6d4 0x874 0x2 0x1
-#define MX6QDL_PAD_NANDF_CS2__EIM_CRE 0x2ec 0x6d4 0x000 0x3 0x0
-#define MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x2ec 0x6d4 0x000 0x4 0x0
-#define MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x2ec 0x6d4 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS2__IPU2_SISG0 0x2ec 0x6d4 0x000 0x6 0x0
-#define MX6QDL_PAD_NANDF_CS3__NAND_CE3_B 0x2f0 0x6d8 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CS3__IPU1_SISG1 0x2f0 0x6d8 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_CS3__ESAI_TX1 0x2f0 0x6d8 0x878 0x2 0x1
-#define MX6QDL_PAD_NANDF_CS3__EIM_ADDR26 0x2f0 0x6d8 0x000 0x3 0x0
-#define MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x2f0 0x6d8 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS3__IPU2_SISG1 0x2f0 0x6d8 0x000 0x6 0x0
-#define MX6QDL_PAD_SD4_CMD__SD4_CMD 0x2f4 0x6dc 0x000 0x0 0x0
-#define MX6QDL_PAD_SD4_CMD__NAND_RE_B 0x2f4 0x6dc 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x2f4 0x6dc 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_CMD__UART3_RX_DATA 0x2f4 0x6dc 0x930 0x2 0x2
-#define MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x2f4 0x6dc 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_CLK__SD4_CLK 0x2f8 0x6e0 0x000 0x0 0x0
-#define MX6QDL_PAD_SD4_CLK__NAND_WE_B 0x2f8 0x6e0 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x2f8 0x6e0 0x930 0x2 0x3
-#define MX6QDL_PAD_SD4_CLK__UART3_TX_DATA 0x2f8 0x6e0 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_CLK__GPIO7_IO10 0x2f8 0x6e0 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D0__NAND_DATA00 0x2fc 0x6e4 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x2fc 0x6e4 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x2fc 0x6e4 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D1__NAND_DATA01 0x300 0x6e8 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x300 0x6e8 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x300 0x6e8 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D2__NAND_DATA02 0x304 0x6ec 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x304 0x6ec 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x304 0x6ec 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D3__NAND_DATA03 0x308 0x6f0 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x308 0x6f0 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x308 0x6f0 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D4__NAND_DATA04 0x30c 0x6f4 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x30c 0x6f4 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x30c 0x6f4 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D5__NAND_DATA05 0x310 0x6f8 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x310 0x6f8 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x310 0x6f8 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D6__NAND_DATA06 0x314 0x6fc 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x314 0x6fc 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x314 0x6fc 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D7__NAND_DATA07 0x318 0x700 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x318 0x700 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x318 0x700 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x31c 0x704 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x31c 0x704 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x31c 0x704 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x320 0x708 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x320 0x708 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x320 0x708 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x324 0x70c 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x324 0x70c 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x324 0x70c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x328 0x710 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x328 0x710 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x32c 0x714 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x32c 0x714 0x928 0x2 0x6
-#define MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA 0x32c 0x714 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x32c 0x714 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x330 0x718 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x330 0x718 0x924 0x2 0x4
-#define MX6QDL_PAD_SD4_DAT5__UART2_CTS_B 0x330 0x718 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x330 0x718 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x334 0x71c 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x334 0x71c 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x334 0x71c 0x924 0x2 0x5
-#define MX6QDL_PAD_SD4_DAT6__GPIO2_IO14 0x334 0x71c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x338 0x720 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x338 0x720 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x338 0x720 0x928 0x2 0x7
-#define MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x338 0x720 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x33c 0x724 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_DAT1__ECSPI5_SS0 0x33c 0x724 0x834 0x1 0x1
-#define MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x33c 0x724 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2 0x33c 0x724 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x33c 0x724 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x340 0x728 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x340 0x728 0x82c 0x1 0x1
-#define MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1 0x340 0x728 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x340 0x728 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x344 0x72c 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_DAT3__ECSPI5_SS2 0x344 0x72c 0x000 0x1 0x0
-#define MX6QDL_PAD_SD1_DAT3__GPT_COMPARE3 0x344 0x72c 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x344 0x72c 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_DAT3__WDOG2_B 0x344 0x72c 0x000 0x4 0x0
-#define MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x344 0x72c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT3__WDOG2_RESET_B_DEB 0x344 0x72c 0x000 0x6 0x0
-#define MX6QDL_PAD_SD1_CMD__SD1_CMD 0x348 0x730 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x348 0x730 0x830 0x1 0x0
-#define MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x348 0x730 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_CMD__GPT_COMPARE1 0x348 0x730 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x348 0x730 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x34c 0x734 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_DAT2__ECSPI5_SS1 0x34c 0x734 0x838 0x1 0x1
-#define MX6QDL_PAD_SD1_DAT2__GPT_COMPARE2 0x34c 0x734 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x34c 0x734 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_DAT2__WDOG1_B 0x34c 0x734 0x000 0x4 0x0
-#define MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x34c 0x734 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT2__WDOG1_RESET_B_DEB 0x34c 0x734 0x000 0x6 0x0
-#define MX6QDL_PAD_SD1_CLK__SD1_CLK 0x350 0x738 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x350 0x738 0x828 0x1 0x0
-#define MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x350 0x738 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_CLK__GPT_CLKIN 0x350 0x738 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x350 0x738 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_CLK__SD2_CLK 0x354 0x73c 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_CLK__ECSPI5_SCLK 0x354 0x73c 0x828 0x1 0x1
-#define MX6QDL_PAD_SD2_CLK__KEY_COL5 0x354 0x73c 0x8e8 0x2 0x3
-#define MX6QDL_PAD_SD2_CLK__AUD4_RXFS 0x354 0x73c 0x7c0 0x3 0x1
-#define MX6QDL_PAD_SD2_CLK__GPIO1_IO10 0x354 0x73c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_CMD__SD2_CMD 0x358 0x740 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_CMD__ECSPI5_MOSI 0x358 0x740 0x830 0x1 0x1
-#define MX6QDL_PAD_SD2_CMD__KEY_ROW5 0x358 0x740 0x8f4 0x2 0x2
-#define MX6QDL_PAD_SD2_CMD__AUD4_RXC 0x358 0x740 0x7bc 0x3 0x1
-#define MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x358 0x740 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x35c 0x744 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_DAT3__ECSPI5_SS3 0x35c 0x744 0x000 0x1 0x0
-#define MX6QDL_PAD_SD2_DAT3__KEY_COL6 0x35c 0x744 0x8ec 0x2 0x2
-#define MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x35c 0x744 0x7c4 0x3 0x1
-#define MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x35c 0x744 0x000 0x5 0x0
-
-#endif /* __DTS_IMX6Q_PINFUNC_H */
diff --git a/arch/arm/dts/imx6q.dtsi b/arch/arm/dts/imx6q.dtsi
index 2b8ec43..9f41c0b 100644
--- a/arch/arm/dts/imx6q.dtsi
+++ b/arch/arm/dts/imx6q.dtsi
@@ -1,180 +1,8 @@
-
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "imx6q-pinfunc.h"
-#include "imx6qdl-pingrp.h"
#include "imx6qdl.dtsi"
+#include <arm/imx6q.dtsi>
/ {
aliases {
- spi4 = &ecspi5;
ipu1 = &ipu2;
};
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- compatible = "arm,cortex-a9";
- device_type = "cpu";
- reg = <0>;
- next-level-cache = <&L2>;
- operating-points = <
- /* kHz uV */
- 1200000 1275000
- 996000 1250000
- 792000 1150000
- 396000 975000
- >;
- fsl,soc-operating-points = <
- /* ARM kHz SOC-PU uV */
- 1200000 1275000
- 996000 1250000
- 792000 1175000
- 396000 1175000
- >;
- clock-latency = <61036>; /* two CLK32 periods */
- clocks = <&clks 104>, <&clks 6>, <&clks 16>,
- <&clks 17>, <&clks 170>;
- clock-names = "arm", "pll2_pfd2_396m", "step",
- "pll1_sw", "pll1_sys";
- arm-supply = <®_arm>;
- pu-supply = <®_pu>;
- soc-supply = <®_soc>;
- };
-
- cpu@1 {
- compatible = "arm,cortex-a9";
- device_type = "cpu";
- reg = <1>;
- next-level-cache = <&L2>;
- };
-
- cpu@2 {
- compatible = "arm,cortex-a9";
- device_type = "cpu";
- reg = <2>;
- next-level-cache = <&L2>;
- };
-
- cpu@3 {
- compatible = "arm,cortex-a9";
- device_type = "cpu";
- reg = <3>;
- next-level-cache = <&L2>;
- };
- };
-
- soc {
- ocram: sram@00900000 {
- compatible = "mmio-sram";
- reg = <0x00900000 0x40000>;
- clocks = <&clks 142>;
- };
-
- aips-bus@02000000 { /* AIPS1 */
- spba-bus@02000000 {
- ecspi5: ecspi@02018000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
- reg = <0x02018000 0x4000>;
- interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 116>, <&clks 116>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
- };
-
- iomuxc: iomuxc@020e0000 {
- compatible = "fsl,imx6q-iomuxc";
-
- ipu2 {
- pinctrl_ipu2_1: ipu2grp-1 {
- fsl,pins = <
- MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0x10
- MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15 0x10
- MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02 0x10
- MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03 0x10
- MX6QDL_PAD_DI0_PIN4__IPU2_DI0_PIN04 0x80000000
- MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00 0x10
- MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01 0x10
- MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02 0x10
- MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03 0x10
- MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04 0x10
- MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05 0x10
- MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06 0x10
- MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07 0x10
- MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08 0x10
- MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09 0x10
- MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10 0x10
- MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11 0x10
- MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12 0x10
- MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13 0x10
- MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14 0x10
- MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15 0x10
- MX6QDL_PAD_DISP0_DAT16__IPU2_DISP0_DATA16 0x10
- MX6QDL_PAD_DISP0_DAT17__IPU2_DISP0_DATA17 0x10
- MX6QDL_PAD_DISP0_DAT18__IPU2_DISP0_DATA18 0x10
- MX6QDL_PAD_DISP0_DAT19__IPU2_DISP0_DATA19 0x10
- MX6QDL_PAD_DISP0_DAT20__IPU2_DISP0_DATA20 0x10
- MX6QDL_PAD_DISP0_DAT21__IPU2_DISP0_DATA21 0x10
- MX6QDL_PAD_DISP0_DAT22__IPU2_DISP0_DATA22 0x10
- MX6QDL_PAD_DISP0_DAT23__IPU2_DISP0_DATA23 0x10
- >;
- };
- };
- };
- };
-
- sata: sata@02200000 {
- compatible = "fsl,imx6q-ahci";
- reg = <0x02200000 0x4000>;
- interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 154>, <&clks 187>, <&clks 105>;
- clock-names = "sata", "sata_ref", "ahb";
- status = "disabled";
- };
-
- ipu2: ipu@02800000 {
- #crtc-cells = <1>;
- compatible = "fsl,imx6q-ipu";
- reg = <0x02800000 0x400000>;
- interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
- <0 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 133>, <&clks 134>, <&clks 137>;
- clock-names = "bus", "di0", "di1";
- resets = <&src 4>;
- };
- };
-};
-
-&hdmi {
- compatible = "fsl,imx6q-hdmi";
-};
-
-&ldb {
- clocks = <&clks 33>, <&clks 34>,
- <&clks 39>, <&clks 40>, <&clks 41>, <&clks 42>,
- <&clks 135>, <&clks 136>;
- clock-names = "di0_pll", "di1_pll",
- "di0_sel", "di1_sel", "di2_sel", "di3_sel",
- "di0", "di1";
-
- lvds-channel@0 {
- crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>;
- };
-
- lvds-channel@1 {
- crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>;
- };
};
diff --git a/arch/arm/dts/imx6qdl.dtsi b/arch/arm/dts/imx6qdl.dtsi
index 8dfd7de..a03709d 100644
--- a/arch/arm/dts/imx6qdl.dtsi
+++ b/arch/arm/dts/imx6qdl.dtsi
@@ -1,960 +1,11 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "skeleton.dtsi"
+#include "imx6qdl-pingrp.h"
/ {
aliases {
- can0 = &can1;
- can1 = &can2;
- gpio0 = &gpio1;
- gpio1 = &gpio2;
- gpio2 = &gpio3;
- gpio3 = &gpio4;
- gpio4 = &gpio5;
- gpio5 = &gpio6;
- gpio6 = &gpio7;
- i2c0 = &i2c1;
- i2c1 = &i2c2;
- i2c2 = &i2c3;
- mmc0 = &usdhc1;
- mmc1 = &usdhc2;
- mmc2 = &usdhc3;
- mmc3 = &usdhc4;
pwm0 = &pwm1;
pwm1 = &pwm2;
pwm2 = &pwm3;
pwm3 = &pwm4;
- serial0 = &uart1;
- serial1 = &uart2;
- serial2 = &uart3;
- serial3 = &uart4;
- serial4 = &uart5;
- spi0 = &ecspi1;
- spi1 = &ecspi2;
- spi2 = &ecspi3;
- spi3 = &ecspi4;
- usbphy0 = &usbphy1;
- usbphy1 = &usbphy2;
ipu0 = &ipu1;
};
-
- intc: interrupt-controller@00a01000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-controller;
- reg = <0x00a01000 0x1000>,
- <0x00a00100 0x100>;
- };
-
- clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ckil {
- compatible = "fsl,imx-ckil", "fixed-clock";
- clock-frequency = <32768>;
- };
-
- ckih1 {
- compatible = "fsl,imx-ckih1", "fixed-clock";
- clock-frequency = <0>;
- };
-
- osc {
- compatible = "fsl,imx-osc", "fixed-clock";
- clock-frequency = <24000000>;
- };
- };
-
- soc {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- interrupt-parent = <&intc>;
- ranges;
-
- dma_apbh: dma-apbh@00110000 {
- compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
- reg = <0x00110000 0x2000>;
- interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
- <0 13 IRQ_TYPE_LEVEL_HIGH>,
- <0 13 IRQ_TYPE_LEVEL_HIGH>,
- <0 13 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
- #dma-cells = <1>;
- dma-channels = <4>;
- clocks = <&clks 106>;
- };
-
- gpmi: gpmi-nand@00112000 {
- compatible = "fsl,imx6q-gpmi-nand";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
- reg-names = "gpmi-nand", "bch";
- interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "bch";
- clocks = <&clks 152>, <&clks 153>, <&clks 151>,
- <&clks 150>, <&clks 149>;
- clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
- "gpmi_bch_apb", "per1_bch";
- dmas = <&dma_apbh 0>;
- dma-names = "rx-tx";
- status = "disabled";
- };
-
- timer@00a00600 {
- compatible = "arm,cortex-a9-twd-timer";
- reg = <0x00a00600 0x20>;
- interrupts = <1 13 0xf01>;
- clocks = <&clks 15>;
- };
-
- L2: l2-cache@00a02000 {
- compatible = "arm,pl310-cache";
- reg = <0x00a02000 0x1000>;
- interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
- cache-unified;
- cache-level = <2>;
- arm,tag-latency = <4 2 3>;
- arm,data-latency = <4 2 3>;
- };
-
- pcie: pcie@0x01000000 {
- compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
- reg = <0x01ffc000 0x4000>; /* DBI */
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- ranges = <0x00000800 0 0x01f00000 0x01f00000 0 0x00080000 /* configuration space */
- 0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */
- 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
- num-lanes = <1>;
- interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>;
- clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi";
- status = "disabled";
- };
-
- pmu {
- compatible = "arm,cortex-a9-pmu";
- interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- aips-bus@02000000 { /* AIPS1 */
- compatible = "fsl,aips-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x02000000 0x100000>;
- ranges;
-
- spba-bus@02000000 {
- compatible = "fsl,spba-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x02000000 0x40000>;
- ranges;
-
- spdif: spdif@02004000 {
- compatible = "fsl,imx35-spdif";
- reg = <0x02004000 0x4000>;
- interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&sdma 14 18 0>,
- <&sdma 15 18 0>;
- dma-names = "rx", "tx";
- clocks = <&clks 197>, <&clks 3>,
- <&clks 197>, <&clks 107>,
- <&clks 0>, <&clks 118>,
- <&clks 0>, <&clks 139>,
- <&clks 0>;
- clock-names = "core", "rxtx0",
- "rxtx1", "rxtx2",
- "rxtx3", "rxtx4",
- "rxtx5", "rxtx6",
- "rxtx7";
- status = "disabled";
- };
-
- ecspi1: ecspi@02008000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
- reg = <0x02008000 0x4000>;
- interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 112>, <&clks 112>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- ecspi2: ecspi@0200c000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
- reg = <0x0200c000 0x4000>;
- interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 113>, <&clks 113>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- ecspi3: ecspi@02010000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
- reg = <0x02010000 0x4000>;
- interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 114>, <&clks 114>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- ecspi4: ecspi@02014000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
- reg = <0x02014000 0x4000>;
- interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 115>, <&clks 115>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- uart1: serial@02020000 {
- compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x02020000 0x4000>;
- interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 160>, <&clks 161>;
- clock-names = "ipg", "per";
- dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- esai: esai@02024000 {
- reg = <0x02024000 0x4000>;
- interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- ssi1: ssi@02028000 {
- compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
- reg = <0x02028000 0x4000>;
- interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 178>;
- dmas = <&sdma 37 1 0>,
- <&sdma 38 1 0>;
- dma-names = "rx", "tx";
- fsl,fifo-depth = <15>;
- fsl,ssi-dma-events = <38 37>;
- status = "disabled";
- };
-
- ssi2: ssi@0202c000 {
- compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
- reg = <0x0202c000 0x4000>;
- interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 179>;
- dmas = <&sdma 41 1 0>,
- <&sdma 42 1 0>;
- dma-names = "rx", "tx";
- fsl,fifo-depth = <15>;
- fsl,ssi-dma-events = <42 41>;
- status = "disabled";
- };
-
- ssi3: ssi@02030000 {
- compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
- reg = <0x02030000 0x4000>;
- interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 180>;
- dmas = <&sdma 45 1 0>,
- <&sdma 46 1 0>;
- dma-names = "rx", "tx";
- fsl,fifo-depth = <15>;
- fsl,ssi-dma-events = <46 45>;
- status = "disabled";
- };
-
- asrc: asrc@02034000 {
- reg = <0x02034000 0x4000>;
- interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- spba@0203c000 {
- reg = <0x0203c000 0x4000>;
- };
- };
-
- vpu: vpu@02040000 {
- reg = <0x02040000 0x3c000>;
- interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>,
- <0 12 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- aipstz@0207c000 { /* AIPSTZ1 */
- reg = <0x0207c000 0x4000>;
- };
-
- pwm1: pwm@02080000 {
- #pwm-cells = <2>;
- compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
- reg = <0x02080000 0x4000>;
- interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 62>, <&clks 145>;
- clock-names = "ipg", "per";
- };
-
- pwm2: pwm@02084000 {
- #pwm-cells = <2>;
- compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
- reg = <0x02084000 0x4000>;
- interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 62>, <&clks 146>;
- clock-names = "ipg", "per";
- };
-
- pwm3: pwm@02088000 {
- #pwm-cells = <2>;
- compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
- reg = <0x02088000 0x4000>;
- interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 62>, <&clks 147>;
- clock-names = "ipg", "per";
- };
-
- pwm4: pwm@0208c000 {
- #pwm-cells = <2>;
- compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
- reg = <0x0208c000 0x4000>;
- interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 62>, <&clks 148>;
- clock-names = "ipg", "per";
- };
-
- can1: flexcan@02090000 {
- compatible = "fsl,imx6q-flexcan";
- reg = <0x02090000 0x4000>;
- interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 108>, <&clks 109>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- can2: flexcan@02094000 {
- compatible = "fsl,imx6q-flexcan";
- reg = <0x02094000 0x4000>;
- interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 110>, <&clks 111>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- gpt: gpt@02098000 {
- compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt";
- reg = <0x02098000 0x4000>;
- interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 119>, <&clks 120>;
- clock-names = "ipg", "per";
- };
-
- gpio1: gpio@0209c000 {
- compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
- reg = <0x0209c000 0x4000>;
- interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>,
- <0 67 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio2: gpio@020a0000 {
- compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
- reg = <0x020a0000 0x4000>;
- interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>,
- <0 69 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio3: gpio@020a4000 {
- compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
- reg = <0x020a4000 0x4000>;
- interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>,
- <0 71 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio4: gpio@020a8000 {
- compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
- reg = <0x020a8000 0x4000>;
- interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>,
- <0 73 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio5: gpio@020ac000 {
- compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
- reg = <0x020ac000 0x4000>;
- interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>,
- <0 75 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio6: gpio@020b0000 {
- compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
- reg = <0x020b0000 0x4000>;
- interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>,
- <0 77 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio7: gpio@020b4000 {
- compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
- reg = <0x020b4000 0x4000>;
- interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>,
- <0 79 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- kpp: kpp@020b8000 {
- reg = <0x020b8000 0x4000>;
- interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- wdog1: wdog@020bc000 {
- compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
- reg = <0x020bc000 0x4000>;
- interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 0>;
- };
-
- wdog2: wdog@020c0000 {
- compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
- reg = <0x020c0000 0x4000>;
- interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 0>;
- status = "disabled";
- };
-
- clks: ccm@020c4000 {
- compatible = "fsl,imx6q-ccm";
- reg = <0x020c4000 0x4000>;
- interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
- <0 88 IRQ_TYPE_LEVEL_HIGH>;
- #clock-cells = <1>;
- };
-
- anatop: anatop@020c8000 {
- compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
- reg = <0x020c8000 0x1000>;
- interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
- <0 54 IRQ_TYPE_LEVEL_HIGH>,
- <0 127 IRQ_TYPE_LEVEL_HIGH>;
-
- regulator-1p1@110 {
- compatible = "fsl,anatop-regulator";
- regulator-name = "vdd1p1";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1375000>;
- regulator-always-on;
- anatop-reg-offset = <0x110>;
- anatop-vol-bit-shift = <8>;
- anatop-vol-bit-width = <5>;
- anatop-min-bit-val = <4>;
- anatop-min-voltage = <800000>;
- anatop-max-voltage = <1375000>;
- };
-
- regulator-3p0@120 {
- compatible = "fsl,anatop-regulator";
- regulator-name = "vdd3p0";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <3150000>;
- regulator-always-on;
- anatop-reg-offset = <0x120>;
- anatop-vol-bit-shift = <8>;
- anatop-vol-bit-width = <5>;
- anatop-min-bit-val = <0>;
- anatop-min-voltage = <2625000>;
- anatop-max-voltage = <3400000>;
- };
-
- regulator-2p5@130 {
- compatible = "fsl,anatop-regulator";
- regulator-name = "vdd2p5";
- regulator-min-microvolt = <2000000>;
- regulator-max-microvolt = <2750000>;
- regulator-always-on;
- anatop-reg-offset = <0x130>;
- anatop-vol-bit-shift = <8>;
- anatop-vol-bit-width = <5>;
- anatop-min-bit-val = <0>;
- anatop-min-voltage = <2000000>;
- anatop-max-voltage = <2750000>;
- };
-
- reg_arm: regulator-vddcore@140 {
- compatible = "fsl,anatop-regulator";
- regulator-name = "vddarm";
- regulator-min-microvolt = <725000>;
- regulator-max-microvolt = <1450000>;
- regulator-always-on;
- anatop-reg-offset = <0x140>;
- anatop-vol-bit-shift = <0>;
- anatop-vol-bit-width = <5>;
- anatop-delay-reg-offset = <0x170>;
- anatop-delay-bit-shift = <24>;
- anatop-delay-bit-width = <2>;
- anatop-min-bit-val = <1>;
- anatop-min-voltage = <725000>;
- anatop-max-voltage = <1450000>;
- };
-
- reg_pu: regulator-vddpu@140 {
- compatible = "fsl,anatop-regulator";
- regulator-name = "vddpu";
- regulator-min-microvolt = <725000>;
- regulator-max-microvolt = <1450000>;
- regulator-always-on;
- anatop-reg-offset = <0x140>;
- anatop-vol-bit-shift = <9>;
- anatop-vol-bit-width = <5>;
- anatop-delay-reg-offset = <0x170>;
- anatop-delay-bit-shift = <26>;
- anatop-delay-bit-width = <2>;
- anatop-min-bit-val = <1>;
- anatop-min-voltage = <725000>;
- anatop-max-voltage = <1450000>;
- };
-
- reg_soc: regulator-vddsoc@140 {
- compatible = "fsl,anatop-regulator";
- regulator-name = "vddsoc";
- regulator-min-microvolt = <725000>;
- regulator-max-microvolt = <1450000>;
- regulator-always-on;
- anatop-reg-offset = <0x140>;
- anatop-vol-bit-shift = <18>;
- anatop-vol-bit-width = <5>;
- anatop-delay-reg-offset = <0x170>;
- anatop-delay-bit-shift = <28>;
- anatop-delay-bit-width = <2>;
- anatop-min-bit-val = <1>;
- anatop-min-voltage = <725000>;
- anatop-max-voltage = <1450000>;
- };
- };
-
- tempmon: tempmon {
- compatible = "fsl,imx6q-tempmon";
- interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
- fsl,tempmon = <&anatop>;
- fsl,tempmon-data = <&ocotp>;
- clocks = <&clks 172>;
- };
-
- usbphy1: usbphy@020c9000 {
- compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
- reg = <0x020c9000 0x1000>;
- interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 182>;
- fsl,anatop = <&anatop>;
- };
-
- usbphy2: usbphy@020ca000 {
- compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
- reg = <0x020ca000 0x1000>;
- interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 183>;
- fsl,anatop = <&anatop>;
- };
-
- snvs@020cc000 {
- compatible = "fsl,sec-v4.0-mon", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x020cc000 0x4000>;
-
- snvs-rtc-lp@34 {
- compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
- interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
- <0 20 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
-
- epit1: epit@020d0000 { /* EPIT1 */
- reg = <0x020d0000 0x4000>;
- interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- epit2: epit@020d4000 { /* EPIT2 */
- reg = <0x020d4000 0x4000>;
- interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- src: src@020d8000 {
- compatible = "fsl,imx6q-src", "fsl,imx51-src";
- reg = <0x020d8000 0x4000>;
- interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
- <0 96 IRQ_TYPE_LEVEL_HIGH>;
- #reset-cells = <1>;
- };
-
- gpc: gpc@020dc000 {
- compatible = "fsl,imx6q-gpc";
- reg = <0x020dc000 0x4000>;
- interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
- <0 90 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- gpr: iomuxc-gpr@020e0000 {
- compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
- reg = <0x020e0000 0x38>;
- };
-
- iomuxc: iomuxc@020e0000 {
- compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc";
- reg = <0x020e0000 0x4000>;
- };
-
- ldb: ldb@020e0008 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb";
- gpr = <&gpr>;
- status = "disabled";
-
- lvds-channel@0 {
- reg = <0>;
- status = "disabled";
- };
-
- lvds-channel@1 {
- reg = <1>;
- status = "disabled";
- };
- };
-
- hdmi: hdmi@0120000 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x00120000 0x9000>;
- interrupts = <0 115 0x04>;
- gpr = <&gpr>;
- clocks = <&clks 123>, <&clks 124>;
- clock-names = "iahb", "isfr";
- status = "disabled";
- };
-
- dcic1: dcic@020e4000 {
- reg = <0x020e4000 0x4000>;
- interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- dcic2: dcic@020e8000 {
- reg = <0x020e8000 0x4000>;
- interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- sdma: sdma@020ec000 {
- compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
- reg = <0x020ec000 0x4000>;
- interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 155>, <&clks 155>;
- clock-names = "ipg", "ahb";
- #dma-cells = <3>;
- fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
- };
- };
-
- aips-bus@02100000 { /* AIPS2 */
- compatible = "fsl,aips-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x02100000 0x100000>;
- ranges;
-
- caam@02100000 {
- reg = <0x02100000 0x40000>;
- interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>,
- <0 106 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- aipstz@0217c000 { /* AIPSTZ2 */
- reg = <0x0217c000 0x4000>;
- };
-
- usbotg: usb@02184000 {
- compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
- reg = <0x02184000 0x200>;
- interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 162>;
- fsl,usbphy = <&usbphy1>;
- fsl,usbmisc = <&usbmisc 0>;
- status = "disabled";
- };
-
- usbh1: usb@02184200 {
- compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
- reg = <0x02184200 0x200>;
- interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 162>;
- fsl,usbphy = <&usbphy2>;
- fsl,usbmisc = <&usbmisc 1>;
- status = "disabled";
- };
-
- usbh2: usb@02184400 {
- compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
- reg = <0x02184400 0x200>;
- interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 162>;
- fsl,usbmisc = <&usbmisc 2>;
- status = "disabled";
- };
-
- usbh3: usb@02184600 {
- compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
- reg = <0x02184600 0x200>;
- interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 162>;
- fsl,usbmisc = <&usbmisc 3>;
- status = "disabled";
- };
-
- usbmisc: usbmisc@02184800 {
- #index-cells = <1>;
- compatible = "fsl,imx6q-usbmisc";
- reg = <0x02184800 0x200>;
- clocks = <&clks 162>;
- };
-
- fec: ethernet@02188000 {
- compatible = "fsl,imx6q-fec";
- reg = <0x02188000 0x4000>;
- interrupts-extended =
- <&intc 0 118 IRQ_TYPE_LEVEL_HIGH>,
- <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 117>, <&clks 117>, <&clks 190>;
- clock-names = "ipg", "ahb", "ptp";
- status = "disabled";
- };
-
- mlb@0218c000 {
- reg = <0x0218c000 0x4000>;
- interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>,
- <0 117 IRQ_TYPE_LEVEL_HIGH>,
- <0 126 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- usdhc1: usdhc@02190000 {
- compatible = "fsl,imx6q-usdhc";
- reg = <0x02190000 0x4000>;
- interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 163>, <&clks 163>, <&clks 163>;
- clock-names = "ipg", "ahb", "per";
- bus-width = <4>;
- status = "disabled";
- };
-
- usdhc2: usdhc@02194000 {
- compatible = "fsl,imx6q-usdhc";
- reg = <0x02194000 0x4000>;
- interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 164>, <&clks 164>, <&clks 164>;
- clock-names = "ipg", "ahb", "per";
- bus-width = <4>;
- status = "disabled";
- };
-
- usdhc3: usdhc@02198000 {
- compatible = "fsl,imx6q-usdhc";
- reg = <0x02198000 0x4000>;
- interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 165>, <&clks 165>, <&clks 165>;
- clock-names = "ipg", "ahb", "per";
- bus-width = <4>;
- status = "disabled";
- };
-
- usdhc4: usdhc@0219c000 {
- compatible = "fsl,imx6q-usdhc";
- reg = <0x0219c000 0x4000>;
- interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 166>, <&clks 166>, <&clks 166>;
- clock-names = "ipg", "ahb", "per";
- bus-width = <4>;
- status = "disabled";
- };
-
- i2c1: i2c@021a0000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
- reg = <0x021a0000 0x4000>;
- interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 125>;
- status = "disabled";
- };
-
- i2c2: i2c@021a4000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
- reg = <0x021a4000 0x4000>;
- interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 126>;
- status = "disabled";
- };
-
- i2c3: i2c@021a8000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
- reg = <0x021a8000 0x4000>;
- interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 127>;
- status = "disabled";
- };
-
- romcp@021ac000 {
- reg = <0x021ac000 0x4000>;
- };
-
- mmdc0: mmdc@021b0000 { /* MMDC0 */
- compatible = "fsl,imx6q-mmdc";
- reg = <0x021b0000 0x4000>;
- };
-
- mmdc1: mmdc@021b4000 { /* MMDC1 */
- reg = <0x021b4000 0x4000>;
- };
-
- weim: weim@021b8000 {
- compatible = "fsl,imx6q-weim";
- reg = <0x021b8000 0x4000>;
- interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 196>;
- };
-
- ocotp: ocotp@021bc000 {
- compatible = "fsl,imx6q-ocotp", "syscon";
- reg = <0x021bc000 0x4000>;
- };
-
- tzasc@021d0000 { /* TZASC1 */
- reg = <0x021d0000 0x4000>;
- interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- tzasc@021d4000 { /* TZASC2 */
- reg = <0x021d4000 0x4000>;
- interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- audmux: audmux@021d8000 {
- compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
- reg = <0x021d8000 0x4000>;
- status = "disabled";
- };
-
- mipi_csi: mipi@021dc000 {
- reg = <0x021dc000 0x4000>;
- };
-
- mipi@021e0000 { /* MIPI-DSI */
- reg = <0x021e0000 0x4000>;
- };
-
- vdoa@021e4000 {
- reg = <0x021e4000 0x4000>;
- interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- uart2: serial@021e8000 {
- compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x021e8000 0x4000>;
- interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 160>, <&clks 161>;
- clock-names = "ipg", "per";
- dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- uart3: serial@021ec000 {
- compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x021ec000 0x4000>;
- interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 160>, <&clks 161>;
- clock-names = "ipg", "per";
- dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- uart4: serial@021f0000 {
- compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x021f0000 0x4000>;
- interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 160>, <&clks 161>;
- clock-names = "ipg", "per";
- dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- uart5: serial@021f4000 {
- compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x021f4000 0x4000>;
- interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 160>, <&clks 161>;
- clock-names = "ipg", "per";
- dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
- };
-
- ipu1: ipu@02400000 {
- #crtc-cells = <1>;
- compatible = "fsl,imx6q-ipu";
- reg = <0x02400000 0x400000>;
- interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>,
- <0 5 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 130>, <&clks 131>, <&clks 132>;
- clock-names = "bus", "di0", "di1";
- resets = <&src 2>;
- };
- };
};
--
1.9.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 07/12] ARM: i.MX53: Use upstream dtsi files
2014-04-28 7:45 [PATCH] Add Linux dts files and use them Sascha Hauer
` (4 preceding siblings ...)
2014-04-28 7:45 ` [PATCH 06/12] ARM: i.MX6: Use upstream dtsi files Sascha Hauer
@ 2014-04-28 7:45 ` Sascha Hauer
2014-04-28 7:45 ` [PATCH 08/12] ARM: i.MX25: Use upstream dtsi file Sascha Hauer
` (5 subsequent siblings)
11 siblings, 0 replies; 23+ messages in thread
From: Sascha Hauer @ 2014-04-28 7:45 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/dts/imx53-mba53.dts | 220 +-----
arch/arm/dts/imx53-pinfunc.h | 1189 --------------------------------
arch/arm/dts/imx53-qsb-common.dtsi | 200 ------
arch/arm/dts/imx53-qsb.dts | 104 +--
arch/arm/dts/imx53-qsrb.dts | 145 +---
arch/arm/dts/imx53-tqma53.dtsi | 170 +----
arch/arm/dts/imx53-voipac-bsb.dts | 125 +---
arch/arm/dts/imx53-voipac-dmm-668.dtsi | 204 ------
arch/arm/dts/imx53.dtsi | 1117 +-----------------------------
9 files changed, 6 insertions(+), 3468 deletions(-)
delete mode 100644 arch/arm/dts/imx53-pinfunc.h
delete mode 100644 arch/arm/dts/imx53-voipac-dmm-668.dtsi
diff --git a/arch/arm/dts/imx53-mba53.dts b/arch/arm/dts/imx53-mba53.dts
index 43bb12c..9ba5dae 100644
--- a/arch/arm/dts/imx53-mba53.dts
+++ b/arch/arm/dts/imx53-mba53.dts
@@ -10,13 +10,9 @@
* http://www.gnu.org/copyleft/gpl.html
*/
-/dts-v1/;
-#include "imx53-tqma53.dtsi"
+#include <arm/imx53-mba53.dts>
/ {
- model = "TQ MBa53 starter kit";
- compatible = "tq,mba53", "tq,tqma53", "fsl,imx53";
-
chosen {
linux,stdout-path = &uart2;
@@ -26,171 +22,9 @@
status = "disabled";
};
};
-
- reg_backlight: fixed@0 {
- compatible = "regulator-fixed";
- regulator-name = "lcd-supply";
- gpio = <&gpio2 5 0>;
- startup-delay-us = <5000>;
- enable-active-low;
- };
-
- backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm2 0 50000>;
- brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>;
- default-brightness-level = <10>;
- enable-gpios = <&gpio7 7 0>;
- power-supply = <®_backlight>;
- };
-
- disp1: display@disp1 {
- compatible = "fsl,imx-parallel-display";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_disp1_1>;
- crtcs = <&ipu 1>;
- interface-pix-fmt = "rgb24";
- status = "disabled";
- };
-
- reg_3p2v: 3p2v {
- compatible = "regulator-fixed";
- regulator-name = "3P2V";
- regulator-min-microvolt = <3200000>;
- regulator-max-microvolt = <3200000>;
- regulator-always-on;
- };
-
- sound {
- compatible = "tq,imx53-mba53-sgtl5000",
- "fsl,imx-audio-sgtl5000";
- model = "imx53-mba53-sgtl5000";
- ssi-controller = <&ssi2>;
- audio-codec = <&codec>;
- audio-routing =
- "MIC_IN", "Mic Jack",
- "Mic Jack", "Mic Bias",
- "Headphone Jack", "HP_OUT";
- mux-int-port = <2>;
- mux-ext-port = <5>;
- };
-};
-
-&ldb {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lvds1_1>;
- status = "disabled";
-};
-
-&iomuxc {
- lvds1 {
- pinctrl_lvds1_1: lvds1-grp1 {
- fsl,pins = <
- MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
- MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
- MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
- MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
- MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
- >;
- };
-
- pinctrl_lvds1_2: lvds1-grp2 {
- fsl,pins = <
- MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
- MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
- MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
- MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
- MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
- >;
- };
- };
-
- disp1 {
- pinctrl_disp1_1: disp1-grp1 {
- fsl,pins = <
- MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x80000000 /* DISP1_CLK */
- MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x80000000 /* DISP1_DRDY */
- MX53_PAD_EIM_D23__IPU_DI1_PIN2 0x80000000 /* DISP1_HSYNC */
- MX53_PAD_EIM_EB3__IPU_DI1_PIN3 0x80000000 /* DISP1_VSYNC */
- MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x80000000
- MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x80000000
- MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x80000000
- MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x80000000
- MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x80000000
- MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x80000000
- MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x80000000
- MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x80000000
- MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x80000000
- MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x80000000
- MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x80000000
- MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x80000000
- MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x80000000
- MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x80000000
- MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x80000000
- MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x80000000
- MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x80000000
- MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x80000000
- MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x80000000
- MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x80000000
- MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x80000000
- MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x80000000
- MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x80000000
- MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x80000000
- >;
- };
- };
-
- tve {
- pinctrl_vga_sync_1: vgasync-grp1 {
- fsl,pins = <
- /* VGA_VSYNC, HSYNC with max drive strength */
- MX53_PAD_EIM_CS1__IPU_DI1_PIN6 0xe6
- MX53_PAD_EIM_DA15__IPU_DI1_PIN4 0xe6
- >;
- };
- };
-};
-
-&cspi {
- status = "okay";
-};
-
-&audmux {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux_1>;
-};
-
-&i2c2 {
- codec: sgtl5000@a {
- compatible = "fsl,sgtl5000";
- reg = <0x0a>;
- clocks = <&clks 150>;
- VDDA-supply = <®_3p2v>;
- VDDIO-supply = <®_3p2v>;
- };
-
- expander: pca9554@20 {
- compatible = "pca9554";
- reg = <0x20>;
- interrupts = <109>;
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- sensor2: lm75@49 {
- compatible = "lm75";
- reg = <0x49>;
- };
-};
-
-&fec {
- phy-reset-gpios = <&gpio7 6 0>;
- status = "okay";
};
&esdhc2 {
- status = "okay";
#address-cells = <1>;
#size-cells = <1>;
@@ -199,55 +33,3 @@
reg = <0x80000 0x80000>;
};
};
-
-&uart3 {
- status = "okay";
-};
-
-&ecspi1 {
- status = "okay";
-};
-
-&usbotg {
- dr_mode = "host";
- status = "okay";
-};
-
-&usbh1 {
- status = "okay";
-};
-
-&uart1 {
- status = "okay";
-};
-
-&ssi2 {
- fsl,mode = "i2s-slave";
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&can1 {
- status = "okay";
-};
-
-&can2 {
- status = "okay";
-};
-
-&i2c3 {
- status = "okay";
-};
-
-&tve {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_vga_sync_1>;
- ddc = <&i2c3>;
- fsl,tve-mode = "vga";
- fsl,hsync-pin = <4>;
- fsl,vsync-pin = <6>;
- status = "okay";
-};
diff --git a/arch/arm/dts/imx53-pinfunc.h b/arch/arm/dts/imx53-pinfunc.h
deleted file mode 100644
index aec406b..0000000
--- a/arch/arm/dts/imx53-pinfunc.h
+++ /dev/null
@@ -1,1189 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __DTS_IMX53_PINFUNC_H
-#define __DTS_IMX53_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-#define MX53_PAD_GPIO_19__KPP_COL_5 0x020 0x348 0x840 0x0 0x0
-#define MX53_PAD_GPIO_19__GPIO4_5 0x020 0x348 0x000 0x1 0x0
-#define MX53_PAD_GPIO_19__CCM_CLKO 0x020 0x348 0x000 0x2 0x0
-#define MX53_PAD_GPIO_19__SPDIF_OUT1 0x020 0x348 0x000 0x3 0x0
-#define MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2 0x020 0x348 0x000 0x4 0x0
-#define MX53_PAD_GPIO_19__ECSPI1_RDY 0x020 0x348 0x000 0x5 0x0
-#define MX53_PAD_GPIO_19__FEC_TDATA_3 0x020 0x348 0x000 0x6 0x0
-#define MX53_PAD_GPIO_19__SRC_INT_BOOT 0x020 0x348 0x000 0x7 0x0
-#define MX53_PAD_KEY_COL0__KPP_COL_0 0x024 0x34c 0x000 0x0 0x0
-#define MX53_PAD_KEY_COL0__GPIO4_6 0x024 0x34c 0x000 0x1 0x0
-#define MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x024 0x34c 0x758 0x2 0x0
-#define MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x024 0x34c 0x000 0x4 0x0
-#define MX53_PAD_KEY_COL0__ECSPI1_SCLK 0x024 0x34c 0x79c 0x5 0x0
-#define MX53_PAD_KEY_COL0__FEC_RDATA_3 0x024 0x34c 0x000 0x6 0x0
-#define MX53_PAD_KEY_COL0__SRC_ANY_PU_RST 0x024 0x34c 0x000 0x7 0x0
-#define MX53_PAD_KEY_ROW0__KPP_ROW_0 0x028 0x350 0x000 0x0 0x0
-#define MX53_PAD_KEY_ROW0__GPIO4_7 0x028 0x350 0x000 0x1 0x0
-#define MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x028 0x350 0x74c 0x2 0x0
-#define MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x028 0x350 0x890 0x4 0x1
-#define MX53_PAD_KEY_ROW0__ECSPI1_MOSI 0x028 0x350 0x7a4 0x5 0x0
-#define MX53_PAD_KEY_ROW0__FEC_TX_ER 0x028 0x350 0x000 0x6 0x0
-#define MX53_PAD_KEY_COL1__KPP_COL_1 0x02c 0x354 0x000 0x0 0x0
-#define MX53_PAD_KEY_COL1__GPIO4_8 0x02c 0x354 0x000 0x1 0x0
-#define MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x02c 0x354 0x75c 0x2 0x0
-#define MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x02c 0x354 0x000 0x4 0x0
-#define MX53_PAD_KEY_COL1__ECSPI1_MISO 0x02c 0x354 0x7a0 0x5 0x0
-#define MX53_PAD_KEY_COL1__FEC_RX_CLK 0x02c 0x354 0x808 0x6 0x0
-#define MX53_PAD_KEY_COL1__USBPHY1_TXREADY 0x02c 0x354 0x000 0x7 0x0
-#define MX53_PAD_KEY_ROW1__KPP_ROW_1 0x030 0x358 0x000 0x0 0x0
-#define MX53_PAD_KEY_ROW1__GPIO4_9 0x030 0x358 0x000 0x1 0x0
-#define MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x030 0x358 0x748 0x2 0x0
-#define MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x030 0x358 0x898 0x4 0x1
-#define MX53_PAD_KEY_ROW1__ECSPI1_SS0 0x030 0x358 0x7a8 0x5 0x0
-#define MX53_PAD_KEY_ROW1__FEC_COL 0x030 0x358 0x800 0x6 0x0
-#define MX53_PAD_KEY_ROW1__USBPHY1_RXVALID 0x030 0x358 0x000 0x7 0x0
-#define MX53_PAD_KEY_COL2__KPP_COL_2 0x034 0x35c 0x000 0x0 0x0
-#define MX53_PAD_KEY_COL2__GPIO4_10 0x034 0x35c 0x000 0x1 0x0
-#define MX53_PAD_KEY_COL2__CAN1_TXCAN 0x034 0x35c 0x000 0x2 0x0
-#define MX53_PAD_KEY_COL2__FEC_MDIO 0x034 0x35c 0x804 0x4 0x0
-#define MX53_PAD_KEY_COL2__ECSPI1_SS1 0x034 0x35c 0x7ac 0x5 0x0
-#define MX53_PAD_KEY_COL2__FEC_RDATA_2 0x034 0x35c 0x000 0x6 0x0
-#define MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE 0x034 0x35c 0x000 0x7 0x0
-#define MX53_PAD_KEY_ROW2__KPP_ROW_2 0x038 0x360 0x000 0x0 0x0
-#define MX53_PAD_KEY_ROW2__GPIO4_11 0x038 0x360 0x000 0x1 0x0
-#define MX53_PAD_KEY_ROW2__CAN1_RXCAN 0x038 0x360 0x760 0x2 0x0
-#define MX53_PAD_KEY_ROW2__FEC_MDC 0x038 0x360 0x000 0x4 0x0
-#define MX53_PAD_KEY_ROW2__ECSPI1_SS2 0x038 0x360 0x7b0 0x5 0x0
-#define MX53_PAD_KEY_ROW2__FEC_TDATA_2 0x038 0x360 0x000 0x6 0x0
-#define MX53_PAD_KEY_ROW2__USBPHY1_RXERROR 0x038 0x360 0x000 0x7 0x0
-#define MX53_PAD_KEY_COL3__KPP_COL_3 0x03c 0x364 0x000 0x0 0x0
-#define MX53_PAD_KEY_COL3__GPIO4_12 0x03c 0x364 0x000 0x1 0x0
-#define MX53_PAD_KEY_COL3__USBOH3_H2_DP 0x03c 0x364 0x000 0x2 0x0
-#define MX53_PAD_KEY_COL3__SPDIF_IN1 0x03c 0x364 0x870 0x3 0x0
-#define MX53_PAD_KEY_COL3__I2C2_SCL 0x03c 0x364 0x81c 0x4 0x0
-#define MX53_PAD_KEY_COL3__ECSPI1_SS3 0x03c 0x364 0x7b4 0x5 0x0
-#define MX53_PAD_KEY_COL3__FEC_CRS 0x03c 0x364 0x000 0x6 0x0
-#define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK 0x03c 0x364 0x000 0x7 0x0
-#define MX53_PAD_KEY_ROW3__KPP_ROW_3 0x040 0x368 0x000 0x0 0x0
-#define MX53_PAD_KEY_ROW3__GPIO4_13 0x040 0x368 0x000 0x1 0x0
-#define MX53_PAD_KEY_ROW3__USBOH3_H2_DM 0x040 0x368 0x000 0x2 0x0
-#define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK 0x040 0x368 0x768 0x3 0x0
-#define MX53_PAD_KEY_ROW3__I2C2_SDA 0x040 0x368 0x820 0x4 0x0
-#define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT 0x040 0x368 0x000 0x5 0x0
-#define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP 0x040 0x368 0x77c 0x6 0x0
-#define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 0x040 0x368 0x000 0x7 0x0
-#define MX53_PAD_KEY_COL4__KPP_COL_4 0x044 0x36c 0x000 0x0 0x0
-#define MX53_PAD_KEY_COL4__GPIO4_14 0x044 0x36c 0x000 0x1 0x0
-#define MX53_PAD_KEY_COL4__CAN2_TXCAN 0x044 0x36c 0x000 0x2 0x0
-#define MX53_PAD_KEY_COL4__IPU_SISG_4 0x044 0x36c 0x000 0x3 0x0
-#define MX53_PAD_KEY_COL4__UART5_RTS 0x044 0x36c 0x894 0x4 0x0
-#define MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC 0x044 0x36c 0x89c 0x5 0x0
-#define MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 0x044 0x36c 0x000 0x7 0x0
-#define MX53_PAD_KEY_ROW4__KPP_ROW_4 0x048 0x370 0x000 0x0 0x0
-#define MX53_PAD_KEY_ROW4__GPIO4_15 0x048 0x370 0x000 0x1 0x0
-#define MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x048 0x370 0x764 0x2 0x0
-#define MX53_PAD_KEY_ROW4__IPU_SISG_5 0x048 0x370 0x000 0x3 0x0
-#define MX53_PAD_KEY_ROW4__UART5_CTS 0x048 0x370 0x000 0x4 0x0
-#define MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR 0x048 0x370 0x000 0x5 0x0
-#define MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID 0x048 0x370 0x000 0x7 0x0
-#define MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x04c 0x378 0x000 0x0 0x0
-#define MX53_PAD_DI0_DISP_CLK__GPIO4_16 0x04c 0x378 0x000 0x1 0x0
-#define MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR 0x04c 0x378 0x000 0x2 0x0
-#define MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0 0x04c 0x378 0x000 0x5 0x0
-#define MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0 0x04c 0x378 0x000 0x6 0x0
-#define MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID 0x04c 0x378 0x000 0x7 0x0
-#define MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 0x050 0x37c 0x000 0x0 0x0
-#define MX53_PAD_DI0_PIN15__GPIO4_17 0x050 0x37c 0x000 0x1 0x0
-#define MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC 0x050 0x37c 0x000 0x2 0x0
-#define MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1 0x050 0x37c 0x000 0x5 0x0
-#define MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1 0x050 0x37c 0x000 0x6 0x0
-#define MX53_PAD_DI0_PIN15__USBPHY1_BVALID 0x050 0x37c 0x000 0x7 0x0
-#define MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 0x054 0x380 0x000 0x0 0x0
-#define MX53_PAD_DI0_PIN2__GPIO4_18 0x054 0x380 0x000 0x1 0x0
-#define MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD 0x054 0x380 0x000 0x2 0x0
-#define MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2 0x054 0x380 0x000 0x5 0x0
-#define MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2 0x054 0x380 0x000 0x6 0x0
-#define MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION 0x054 0x380 0x000 0x7 0x0
-#define MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 0x058 0x384 0x000 0x0 0x0
-#define MX53_PAD_DI0_PIN3__GPIO4_19 0x058 0x384 0x000 0x1 0x0
-#define MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS 0x058 0x384 0x000 0x2 0x0
-#define MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3 0x058 0x384 0x000 0x5 0x0
-#define MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3 0x058 0x384 0x000 0x6 0x0
-#define MX53_PAD_DI0_PIN3__USBPHY1_IDDIG 0x058 0x384 0x000 0x7 0x0
-#define MX53_PAD_DI0_PIN4__IPU_DI0_PIN4 0x05c 0x388 0x000 0x0 0x0
-#define MX53_PAD_DI0_PIN4__GPIO4_20 0x05c 0x388 0x000 0x1 0x0
-#define MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD 0x05c 0x388 0x000 0x2 0x0
-#define MX53_PAD_DI0_PIN4__ESDHC1_WP 0x05c 0x388 0x7fc 0x3 0x0
-#define MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD 0x05c 0x388 0x000 0x5 0x0
-#define MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4 0x05c 0x388 0x000 0x6 0x0
-#define MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT 0x05c 0x388 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 0x060 0x38c 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT0__GPIO4_21 0x060 0x38c 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT0__CSPI_SCLK 0x060 0x38c 0x780 0x2 0x0
-#define MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 0x060 0x38c 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN 0x060 0x38c 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5 0x060 0x38c 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY 0x060 0x38c 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 0x064 0x390 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT1__GPIO4_22 0x064 0x390 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT1__CSPI_MOSI 0x064 0x390 0x788 0x2 0x0
-#define MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 0x064 0x390 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL 0x064 0x390 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6 0x064 0x390 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID 0x064 0x390 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 0x068 0x394 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT2__GPIO4_23 0x068 0x394 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT2__CSPI_MISO 0x068 0x394 0x784 0x2 0x0
-#define MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 0x068 0x394 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE 0x068 0x394 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7 0x068 0x394 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE 0x068 0x394 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 0x06c 0x398 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT3__GPIO4_24 0x06c 0x398 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT3__CSPI_SS0 0x06c 0x398 0x78c 0x2 0x0
-#define MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 0x06c 0x398 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR 0x06c 0x398 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8 0x06c 0x398 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR 0x06c 0x398 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 0x070 0x39c 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT4__GPIO4_25 0x070 0x39c 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT4__CSPI_SS1 0x070 0x39c 0x790 0x2 0x0
-#define MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 0x070 0x39c 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB 0x070 0x39c 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9 0x070 0x39c 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK 0x070 0x39c 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 0x074 0x3a0 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT5__GPIO4_26 0x074 0x3a0 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT5__CSPI_SS2 0x074 0x3a0 0x794 0x2 0x0
-#define MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 0x074 0x3a0 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS 0x074 0x3a0 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10 0x074 0x3a0 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0 0x074 0x3a0 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 0x078 0x3a4 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT6__GPIO4_27 0x078 0x3a4 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT6__CSPI_SS3 0x078 0x3a4 0x798 0x2 0x0
-#define MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 0x078 0x3a4 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE 0x078 0x3a4 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11 0x078 0x3a4 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1 0x078 0x3a4 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 0x07c 0x3a8 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT7__GPIO4_28 0x07c 0x3a8 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT7__CSPI_RDY 0x07c 0x3a8 0x000 0x2 0x0
-#define MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 0x07c 0x3a8 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0 0x07c 0x3a8 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12 0x07c 0x3a8 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID 0x07c 0x3a8 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 0x080 0x3ac 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT8__GPIO4_29 0x080 0x3ac 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT8__PWM1_PWMO 0x080 0x3ac 0x000 0x2 0x0
-#define MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B 0x080 0x3ac 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1 0x080 0x3ac 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13 0x080 0x3ac 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT8__USBPHY2_AVALID 0x080 0x3ac 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 0x084 0x3b0 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT9__GPIO4_30 0x084 0x3b0 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT9__PWM2_PWMO 0x084 0x3b0 0x000 0x2 0x0
-#define MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B 0x084 0x3b0 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2 0x084 0x3b0 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14 0x084 0x3b0 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0 0x084 0x3b0 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 0x088 0x3b4 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT10__GPIO4_31 0x088 0x3b4 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP 0x088 0x3b4 0x000 0x2 0x0
-#define MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3 0x088 0x3b4 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15 0x088 0x3b4 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1 0x088 0x3b4 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 0x08c 0x3b8 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT11__GPIO5_5 0x08c 0x3b8 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT 0x08c 0x3b8 0x000 0x2 0x0
-#define MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4 0x08c 0x3b8 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16 0x08c 0x3b8 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2 0x08c 0x3b8 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 0x090 0x3bc 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT12__GPIO5_6 0x090 0x3bc 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK 0x090 0x3bc 0x000 0x2 0x0
-#define MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5 0x090 0x3bc 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17 0x090 0x3bc 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3 0x090 0x3bc 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 0x094 0x3c0 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT13__GPIO5_7 0x094 0x3c0 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS 0x094 0x3c0 0x754 0x3 0x0
-#define MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0 0x094 0x3c0 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18 0x094 0x3c0 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4 0x094 0x3c0 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 0x098 0x3c4 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT14__GPIO5_8 0x098 0x3c4 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC 0x098 0x3c4 0x750 0x3 0x0
-#define MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1 0x098 0x3c4 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19 0x098 0x3c4 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5 0x098 0x3c4 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 0x09c 0x3c8 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT15__GPIO5_9 0x09c 0x3c8 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT15__ECSPI1_SS1 0x09c 0x3c8 0x7ac 0x2 0x1
-#define MX53_PAD_DISP0_DAT15__ECSPI2_SS1 0x09c 0x3c8 0x7c8 0x3 0x0
-#define MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2 0x09c 0x3c8 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20 0x09c 0x3c8 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6 0x09c 0x3c8 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 0x0a0 0x3cc 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT16__GPIO5_10 0x0a0 0x3cc 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT16__ECSPI2_MOSI 0x0a0 0x3cc 0x7c0 0x2 0x0
-#define MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC 0x0a0 0x3cc 0x758 0x3 0x1
-#define MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 0x0a0 0x3cc 0x868 0x4 0x0
-#define MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3 0x0a0 0x3cc 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21 0x0a0 0x3cc 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7 0x0a0 0x3cc 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 0x0a4 0x3d0 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT17__GPIO5_11 0x0a4 0x3d0 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT17__ECSPI2_MISO 0x0a4 0x3d0 0x7bc 0x2 0x0
-#define MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD 0x0a4 0x3d0 0x74c 0x3 0x1
-#define MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 0x0a4 0x3d0 0x86c 0x4 0x0
-#define MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4 0x0a4 0x3d0 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22 0x0a4 0x3d0 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 0x0a8 0x3d4 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT18__GPIO5_12 0x0a8 0x3d4 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT18__ECSPI2_SS0 0x0a8 0x3d4 0x7c4 0x2 0x0
-#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS 0x0a8 0x3d4 0x75c 0x3 0x1
-#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS 0x0a8 0x3d4 0x73c 0x4 0x0
-#define MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5 0x0a8 0x3d4 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23 0x0a8 0x3d4 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2 0x0a8 0x3d4 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 0x0ac 0x3d8 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT19__GPIO5_13 0x0ac 0x3d8 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT19__ECSPI2_SCLK 0x0ac 0x3d8 0x7b8 0x2 0x0
-#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD 0x0ac 0x3d8 0x748 0x3 0x1
-#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC 0x0ac 0x3d8 0x738 0x4 0x0
-#define MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6 0x0ac 0x3d8 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24 0x0ac 0x3d8 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3 0x0ac 0x3d8 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 0x0b0 0x3dc 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT20__GPIO5_14 0x0b0 0x3dc 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT20__ECSPI1_SCLK 0x0b0 0x3dc 0x79c 0x2 0x1
-#define MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC 0x0b0 0x3dc 0x740 0x3 0x0
-#define MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7 0x0b0 0x3dc 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25 0x0b0 0x3dc 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT20__SATA_PHY_TDI 0x0b0 0x3dc 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 0x0b4 0x3e0 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT21__GPIO5_15 0x0b4 0x3e0 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT21__ECSPI1_MOSI 0x0b4 0x3e0 0x7a4 0x2 0x1
-#define MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD 0x0b4 0x3e0 0x734 0x3 0x0
-#define MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0 0x0b4 0x3e0 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26 0x0b4 0x3e0 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT21__SATA_PHY_TDO 0x0b4 0x3e0 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 0x0b8 0x3e4 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT22__GPIO5_16 0x0b8 0x3e4 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT22__ECSPI1_MISO 0x0b8 0x3e4 0x7a0 0x2 0x1
-#define MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS 0x0b8 0x3e4 0x744 0x3 0x0
-#define MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1 0x0b8 0x3e4 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27 0x0b8 0x3e4 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT22__SATA_PHY_TCK 0x0b8 0x3e4 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x0bc 0x3e8 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT23__GPIO5_17 0x0bc 0x3e8 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT23__ECSPI1_SS0 0x0bc 0x3e8 0x7a8 0x2 0x1
-#define MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD 0x0bc 0x3e8 0x730 0x3 0x0
-#define MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2 0x0bc 0x3e8 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28 0x0bc 0x3e8 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT23__SATA_PHY_TMS 0x0bc 0x3e8 0x000 0x7 0x0
-#define MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x0c0 0x3ec 0x000 0x0 0x0
-#define MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x0c0 0x3ec 0x000 0x1 0x0
-#define MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 0x0c0 0x3ec 0x000 0x5 0x0
-#define MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29 0x0c0 0x3ec 0x000 0x6 0x0
-#define MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC 0x0c4 0x3f0 0x000 0x0 0x0
-#define MX53_PAD_CSI0_MCLK__GPIO5_19 0x0c4 0x3f0 0x000 0x1 0x0
-#define MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK 0x0c4 0x3f0 0x000 0x2 0x0
-#define MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 0x0c4 0x3f0 0x000 0x5 0x0
-#define MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30 0x0c4 0x3f0 0x000 0x6 0x0
-#define MX53_PAD_CSI0_MCLK__TPIU_TRCTL 0x0c4 0x3f0 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN 0x0c8 0x3f4 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x0c8 0x3f4 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 0x0c8 0x3f4 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31 0x0c8 0x3f4 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK 0x0c8 0x3f4 0x000 0x7 0x0
-#define MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC 0x0cc 0x3f8 0x000 0x0 0x0
-#define MX53_PAD_CSI0_VSYNC__GPIO5_21 0x0cc 0x3f8 0x000 0x1 0x0
-#define MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 0x0cc 0x3f8 0x000 0x5 0x0
-#define MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32 0x0cc 0x3f8 0x000 0x6 0x0
-#define MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0 0x0cc 0x3f8 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 0x0d0 0x3fc 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT4__GPIO5_22 0x0d0 0x3fc 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT4__KPP_COL_5 0x0d0 0x3fc 0x840 0x2 0x1
-#define MX53_PAD_CSI0_DAT4__ECSPI1_SCLK 0x0d0 0x3fc 0x79c 0x3 0x2
-#define MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP 0x0d0 0x3fc 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC 0x0d0 0x3fc 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33 0x0d0 0x3fc 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT4__TPIU_TRACE_1 0x0d0 0x3fc 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 0x0d4 0x400 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT5__GPIO5_23 0x0d4 0x400 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT5__KPP_ROW_5 0x0d4 0x400 0x84c 0x2 0x0
-#define MX53_PAD_CSI0_DAT5__ECSPI1_MOSI 0x0d4 0x400 0x7a4 0x3 0x2
-#define MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT 0x0d4 0x400 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD 0x0d4 0x400 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34 0x0d4 0x400 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT5__TPIU_TRACE_2 0x0d4 0x400 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 0x0d8 0x404 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT6__GPIO5_24 0x0d8 0x404 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT6__KPP_COL_6 0x0d8 0x404 0x844 0x2 0x0
-#define MX53_PAD_CSI0_DAT6__ECSPI1_MISO 0x0d8 0x404 0x7a0 0x3 0x2
-#define MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK 0x0d8 0x404 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS 0x0d8 0x404 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35 0x0d8 0x404 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT6__TPIU_TRACE_3 0x0d8 0x404 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 0x0dc 0x408 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT7__GPIO5_25 0x0dc 0x408 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT7__KPP_ROW_6 0x0dc 0x408 0x850 0x2 0x0
-#define MX53_PAD_CSI0_DAT7__ECSPI1_SS0 0x0dc 0x408 0x7a8 0x3 0x2
-#define MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR 0x0dc 0x408 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD 0x0dc 0x408 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36 0x0dc 0x408 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT7__TPIU_TRACE_4 0x0dc 0x408 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 0x0e0 0x40c 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT8__GPIO5_26 0x0e0 0x40c 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT8__KPP_COL_7 0x0e0 0x40c 0x848 0x2 0x0
-#define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK 0x0e0 0x40c 0x7b8 0x3 0x1
-#define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC 0x0e0 0x40c 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT8__I2C1_SDA 0x0e0 0x40c 0x818 0x5 0x0
-#define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 0x0e0 0x40c 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 0x0e0 0x40c 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 0x0e4 0x410 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT9__GPIO5_27 0x0e4 0x410 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT9__KPP_ROW_7 0x0e4 0x410 0x854 0x2 0x0
-#define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI 0x0e4 0x410 0x7c0 0x3 0x1
-#define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR 0x0e4 0x410 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT9__I2C1_SCL 0x0e4 0x410 0x814 0x5 0x0
-#define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 0x0e4 0x410 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 0x0e4 0x410 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 0x0e8 0x414 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT10__GPIO5_28 0x0e8 0x414 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x0e8 0x414 0x000 0x2 0x0
-#define MX53_PAD_CSI0_DAT10__ECSPI2_MISO 0x0e8 0x414 0x7bc 0x3 0x1
-#define MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC 0x0e8 0x414 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 0x0e8 0x414 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39 0x0e8 0x414 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT10__TPIU_TRACE_7 0x0e8 0x414 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 0x0ec 0x418 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT11__GPIO5_29 0x0ec 0x418 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x0ec 0x418 0x878 0x2 0x1
-#define MX53_PAD_CSI0_DAT11__ECSPI2_SS0 0x0ec 0x418 0x7c4 0x3 0x1
-#define MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS 0x0ec 0x418 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 0x0ec 0x418 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40 0x0ec 0x418 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 0x0ec 0x418 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 0x0f0 0x41c 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT12__GPIO5_30 0x0f0 0x41c 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT12__UART4_TXD_MUX 0x0f0 0x41c 0x000 0x2 0x0
-#define MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 0x0f0 0x41c 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 0x0f0 0x41c 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 0x0f0 0x41c 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT12__TPIU_TRACE_9 0x0f0 0x41c 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 0x0f4 0x420 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT13__GPIO5_31 0x0f4 0x420 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT13__UART4_RXD_MUX 0x0f4 0x420 0x890 0x2 0x3
-#define MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 0x0f4 0x420 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 0x0f4 0x420 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42 0x0f4 0x420 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 0x0f4 0x420 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 0x0f8 0x424 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT14__GPIO6_0 0x0f8 0x424 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT14__UART5_TXD_MUX 0x0f8 0x424 0x000 0x2 0x0
-#define MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 0x0f8 0x424 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 0x0f8 0x424 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 0x0f8 0x424 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT14__TPIU_TRACE_11 0x0f8 0x424 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 0x0fc 0x428 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT15__GPIO6_1 0x0fc 0x428 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT15__UART5_RXD_MUX 0x0fc 0x428 0x898 0x2 0x3
-#define MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 0x0fc 0x428 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 0x0fc 0x428 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44 0x0fc 0x428 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT15__TPIU_TRACE_12 0x0fc 0x428 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 0x100 0x42c 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT16__GPIO6_2 0x100 0x42c 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT16__UART4_RTS 0x100 0x42c 0x88c 0x2 0x0
-#define MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 0x100 0x42c 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 0x100 0x42c 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45 0x100 0x42c 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 0x100 0x42c 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 0x104 0x430 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT17__GPIO6_3 0x104 0x430 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT17__UART4_CTS 0x104 0x430 0x000 0x2 0x0
-#define MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 0x104 0x430 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 0x104 0x430 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 0x104 0x430 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT17__TPIU_TRACE_14 0x104 0x430 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 0x108 0x434 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT18__GPIO6_4 0x108 0x434 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT18__UART5_RTS 0x108 0x434 0x894 0x2 0x2
-#define MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 0x108 0x434 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 0x108 0x434 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47 0x108 0x434 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 0x108 0x434 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 0x10c 0x438 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT19__GPIO6_5 0x10c 0x438 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT19__UART5_CTS 0x10c 0x438 0x000 0x2 0x0
-#define MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 0x10c 0x438 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 0x10c 0x438 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 0x10c 0x438 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK 0x10c 0x438 0x000 0x7 0x0
-#define MX53_PAD_EIM_A25__EMI_WEIM_A_25 0x110 0x458 0x000 0x0 0x0
-#define MX53_PAD_EIM_A25__GPIO5_2 0x110 0x458 0x000 0x1 0x0
-#define MX53_PAD_EIM_A25__ECSPI2_RDY 0x110 0x458 0x000 0x2 0x0
-#define MX53_PAD_EIM_A25__IPU_DI1_PIN12 0x110 0x458 0x000 0x3 0x0
-#define MX53_PAD_EIM_A25__CSPI_SS1 0x110 0x458 0x790 0x4 0x1
-#define MX53_PAD_EIM_A25__IPU_DI0_D1_CS 0x110 0x458 0x000 0x6 0x0
-#define MX53_PAD_EIM_A25__USBPHY1_BISTOK 0x110 0x458 0x000 0x7 0x0
-#define MX53_PAD_EIM_EB2__EMI_WEIM_EB_2 0x114 0x45c 0x000 0x0 0x0
-#define MX53_PAD_EIM_EB2__GPIO2_30 0x114 0x45c 0x000 0x1 0x0
-#define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK 0x114 0x45c 0x76c 0x2 0x0
-#define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS 0x114 0x45c 0x000 0x3 0x0
-#define MX53_PAD_EIM_EB2__ECSPI1_SS0 0x114 0x45c 0x7a8 0x4 0x3
-#define MX53_PAD_EIM_EB2__I2C2_SCL 0x114 0x45c 0x81c 0x5 0x1
-#define MX53_PAD_EIM_D16__EMI_WEIM_D_16 0x118 0x460 0x000 0x0 0x0
-#define MX53_PAD_EIM_D16__GPIO3_16 0x118 0x460 0x000 0x1 0x0
-#define MX53_PAD_EIM_D16__IPU_DI0_PIN5 0x118 0x460 0x000 0x2 0x0
-#define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK 0x118 0x460 0x000 0x3 0x0
-#define MX53_PAD_EIM_D16__ECSPI1_SCLK 0x118 0x460 0x79c 0x4 0x3
-#define MX53_PAD_EIM_D16__I2C2_SDA 0x118 0x460 0x820 0x5 0x1
-#define MX53_PAD_EIM_D17__EMI_WEIM_D_17 0x11c 0x464 0x000 0x0 0x0
-#define MX53_PAD_EIM_D17__GPIO3_17 0x11c 0x464 0x000 0x1 0x0
-#define MX53_PAD_EIM_D17__IPU_DI0_PIN6 0x11c 0x464 0x000 0x2 0x0
-#define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN 0x11c 0x464 0x830 0x3 0x0
-#define MX53_PAD_EIM_D17__ECSPI1_MISO 0x11c 0x464 0x7a0 0x4 0x3
-#define MX53_PAD_EIM_D17__I2C3_SCL 0x11c 0x464 0x824 0x5 0x0
-#define MX53_PAD_EIM_D18__EMI_WEIM_D_18 0x120 0x468 0x000 0x0 0x0
-#define MX53_PAD_EIM_D18__GPIO3_18 0x120 0x468 0x000 0x1 0x0
-#define MX53_PAD_EIM_D18__IPU_DI0_PIN7 0x120 0x468 0x000 0x2 0x0
-#define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO 0x120 0x468 0x830 0x3 0x1
-#define MX53_PAD_EIM_D18__ECSPI1_MOSI 0x120 0x468 0x7a4 0x4 0x3
-#define MX53_PAD_EIM_D18__I2C3_SDA 0x120 0x468 0x828 0x5 0x0
-#define MX53_PAD_EIM_D18__IPU_DI1_D0_CS 0x120 0x468 0x000 0x6 0x0
-#define MX53_PAD_EIM_D19__EMI_WEIM_D_19 0x124 0x46c 0x000 0x0 0x0
-#define MX53_PAD_EIM_D19__GPIO3_19 0x124 0x46c 0x000 0x1 0x0
-#define MX53_PAD_EIM_D19__IPU_DI0_PIN8 0x124 0x46c 0x000 0x2 0x0
-#define MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS 0x124 0x46c 0x000 0x3 0x0
-#define MX53_PAD_EIM_D19__ECSPI1_SS1 0x124 0x46c 0x7ac 0x4 0x2
-#define MX53_PAD_EIM_D19__EPIT1_EPITO 0x124 0x46c 0x000 0x5 0x0
-#define MX53_PAD_EIM_D19__UART1_CTS 0x124 0x46c 0x000 0x6 0x0
-#define MX53_PAD_EIM_D19__USBOH3_USBH2_OC 0x124 0x46c 0x8a4 0x7 0x0
-#define MX53_PAD_EIM_D20__EMI_WEIM_D_20 0x128 0x470 0x000 0x0 0x0
-#define MX53_PAD_EIM_D20__GPIO3_20 0x128 0x470 0x000 0x1 0x0
-#define MX53_PAD_EIM_D20__IPU_DI0_PIN16 0x128 0x470 0x000 0x2 0x0
-#define MX53_PAD_EIM_D20__IPU_SER_DISP0_CS 0x128 0x470 0x000 0x3 0x0
-#define MX53_PAD_EIM_D20__CSPI_SS0 0x128 0x470 0x78c 0x4 0x1
-#define MX53_PAD_EIM_D20__EPIT2_EPITO 0x128 0x470 0x000 0x5 0x0
-#define MX53_PAD_EIM_D20__UART1_RTS 0x128 0x470 0x874 0x6 0x1
-#define MX53_PAD_EIM_D20__USBOH3_USBH2_PWR 0x128 0x470 0x000 0x7 0x0
-#define MX53_PAD_EIM_D21__EMI_WEIM_D_21 0x12c 0x474 0x000 0x0 0x0
-#define MX53_PAD_EIM_D21__GPIO3_21 0x12c 0x474 0x000 0x1 0x0
-#define MX53_PAD_EIM_D21__IPU_DI0_PIN17 0x12c 0x474 0x000 0x2 0x0
-#define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK 0x12c 0x474 0x000 0x3 0x0
-#define MX53_PAD_EIM_D21__CSPI_SCLK 0x12c 0x474 0x780 0x4 0x1
-#define MX53_PAD_EIM_D21__I2C1_SCL 0x12c 0x474 0x814 0x5 0x1
-#define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC 0x12c 0x474 0x89c 0x6 0x1
-#define MX53_PAD_EIM_D22__EMI_WEIM_D_22 0x130 0x478 0x000 0x0 0x0
-#define MX53_PAD_EIM_D22__GPIO3_22 0x130 0x478 0x000 0x1 0x0
-#define MX53_PAD_EIM_D22__IPU_DI0_PIN1 0x130 0x478 0x000 0x2 0x0
-#define MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN 0x130 0x478 0x82c 0x3 0x0
-#define MX53_PAD_EIM_D22__CSPI_MISO 0x130 0x478 0x784 0x4 0x1
-#define MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR 0x130 0x478 0x000 0x6 0x0
-#define MX53_PAD_EIM_D23__EMI_WEIM_D_23 0x134 0x47c 0x000 0x0 0x0
-#define MX53_PAD_EIM_D23__GPIO3_23 0x134 0x47c 0x000 0x1 0x0
-#define MX53_PAD_EIM_D23__UART3_CTS 0x134 0x47c 0x000 0x2 0x0
-#define MX53_PAD_EIM_D23__UART1_DCD 0x134 0x47c 0x000 0x3 0x0
-#define MX53_PAD_EIM_D23__IPU_DI0_D0_CS 0x134 0x47c 0x000 0x4 0x0
-#define MX53_PAD_EIM_D23__IPU_DI1_PIN2 0x134 0x47c 0x000 0x5 0x0
-#define MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN 0x134 0x47c 0x834 0x6 0x0
-#define MX53_PAD_EIM_D23__IPU_DI1_PIN14 0x134 0x47c 0x000 0x7 0x0
-#define MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 0x138 0x480 0x000 0x0 0x0
-#define MX53_PAD_EIM_EB3__GPIO2_31 0x138 0x480 0x000 0x1 0x0
-#define MX53_PAD_EIM_EB3__UART3_RTS 0x138 0x480 0x884 0x2 0x1
-#define MX53_PAD_EIM_EB3__UART1_RI 0x138 0x480 0x000 0x3 0x0
-#define MX53_PAD_EIM_EB3__IPU_DI1_PIN3 0x138 0x480 0x000 0x5 0x0
-#define MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC 0x138 0x480 0x838 0x6 0x0
-#define MX53_PAD_EIM_EB3__IPU_DI1_PIN16 0x138 0x480 0x000 0x7 0x0
-#define MX53_PAD_EIM_D24__EMI_WEIM_D_24 0x13c 0x484 0x000 0x0 0x0
-#define MX53_PAD_EIM_D24__GPIO3_24 0x13c 0x484 0x000 0x1 0x0
-#define MX53_PAD_EIM_D24__UART3_TXD_MUX 0x13c 0x484 0x000 0x2 0x0
-#define MX53_PAD_EIM_D24__ECSPI1_SS2 0x13c 0x484 0x7b0 0x3 0x1
-#define MX53_PAD_EIM_D24__CSPI_SS2 0x13c 0x484 0x794 0x4 0x1
-#define MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS 0x13c 0x484 0x754 0x5 0x1
-#define MX53_PAD_EIM_D24__ECSPI2_SS2 0x13c 0x484 0x000 0x6 0x0
-#define MX53_PAD_EIM_D24__UART1_DTR 0x13c 0x484 0x000 0x7 0x0
-#define MX53_PAD_EIM_D25__EMI_WEIM_D_25 0x140 0x488 0x000 0x0 0x0
-#define MX53_PAD_EIM_D25__GPIO3_25 0x140 0x488 0x000 0x1 0x0
-#define MX53_PAD_EIM_D25__UART3_RXD_MUX 0x140 0x488 0x888 0x2 0x1
-#define MX53_PAD_EIM_D25__ECSPI1_SS3 0x140 0x488 0x7b4 0x3 0x1
-#define MX53_PAD_EIM_D25__CSPI_SS3 0x140 0x488 0x798 0x4 0x1
-#define MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC 0x140 0x488 0x750 0x5 0x1
-#define MX53_PAD_EIM_D25__ECSPI2_SS3 0x140 0x488 0x000 0x6 0x0
-#define MX53_PAD_EIM_D25__UART1_DSR 0x140 0x488 0x000 0x7 0x0
-#define MX53_PAD_EIM_D26__EMI_WEIM_D_26 0x144 0x48c 0x000 0x0 0x0
-#define MX53_PAD_EIM_D26__GPIO3_26 0x144 0x48c 0x000 0x1 0x0
-#define MX53_PAD_EIM_D26__UART2_TXD_MUX 0x144 0x48c 0x000 0x2 0x0
-#define MX53_PAD_EIM_D26__FIRI_RXD 0x144 0x48c 0x80c 0x3 0x0
-#define MX53_PAD_EIM_D26__IPU_CSI0_D_1 0x144 0x48c 0x000 0x4 0x0
-#define MX53_PAD_EIM_D26__IPU_DI1_PIN11 0x144 0x48c 0x000 0x5 0x0
-#define MX53_PAD_EIM_D26__IPU_SISG_2 0x144 0x48c 0x000 0x6 0x0
-#define MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x144 0x48c 0x000 0x7 0x0
-#define MX53_PAD_EIM_D27__EMI_WEIM_D_27 0x148 0x490 0x000 0x0 0x0
-#define MX53_PAD_EIM_D27__GPIO3_27 0x148 0x490 0x000 0x1 0x0
-#define MX53_PAD_EIM_D27__UART2_RXD_MUX 0x148 0x490 0x880 0x2 0x1
-#define MX53_PAD_EIM_D27__FIRI_TXD 0x148 0x490 0x000 0x3 0x0
-#define MX53_PAD_EIM_D27__IPU_CSI0_D_0 0x148 0x490 0x000 0x4 0x0
-#define MX53_PAD_EIM_D27__IPU_DI1_PIN13 0x148 0x490 0x000 0x5 0x0
-#define MX53_PAD_EIM_D27__IPU_SISG_3 0x148 0x490 0x000 0x6 0x0
-#define MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x148 0x490 0x000 0x7 0x0
-#define MX53_PAD_EIM_D28__EMI_WEIM_D_28 0x14c 0x494 0x000 0x0 0x0
-#define MX53_PAD_EIM_D28__GPIO3_28 0x14c 0x494 0x000 0x1 0x0
-#define MX53_PAD_EIM_D28__UART2_CTS 0x14c 0x494 0x000 0x2 0x0
-#define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO 0x14c 0x494 0x82c 0x3 0x1
-#define MX53_PAD_EIM_D28__CSPI_MOSI 0x14c 0x494 0x788 0x4 0x1
-#define MX53_PAD_EIM_D28__I2C1_SDA 0x14c 0x494 0x818 0x5 0x1
-#define MX53_PAD_EIM_D28__IPU_EXT_TRIG 0x14c 0x494 0x000 0x6 0x0
-#define MX53_PAD_EIM_D28__IPU_DI0_PIN13 0x14c 0x494 0x000 0x7 0x0
-#define MX53_PAD_EIM_D29__EMI_WEIM_D_29 0x150 0x498 0x000 0x0 0x0
-#define MX53_PAD_EIM_D29__GPIO3_29 0x150 0x498 0x000 0x1 0x0
-#define MX53_PAD_EIM_D29__UART2_RTS 0x150 0x498 0x87c 0x2 0x1
-#define MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS 0x150 0x498 0x000 0x3 0x0
-#define MX53_PAD_EIM_D29__CSPI_SS0 0x150 0x498 0x78c 0x4 0x2
-#define MX53_PAD_EIM_D29__IPU_DI1_PIN15 0x150 0x498 0x000 0x5 0x0
-#define MX53_PAD_EIM_D29__IPU_CSI1_VSYNC 0x150 0x498 0x83c 0x6 0x0
-#define MX53_PAD_EIM_D29__IPU_DI0_PIN14 0x150 0x498 0x000 0x7 0x0
-#define MX53_PAD_EIM_D30__EMI_WEIM_D_30 0x154 0x49c 0x000 0x0 0x0
-#define MX53_PAD_EIM_D30__GPIO3_30 0x154 0x49c 0x000 0x1 0x0
-#define MX53_PAD_EIM_D30__UART3_CTS 0x154 0x49c 0x000 0x2 0x0
-#define MX53_PAD_EIM_D30__IPU_CSI0_D_3 0x154 0x49c 0x000 0x3 0x0
-#define MX53_PAD_EIM_D30__IPU_DI0_PIN11 0x154 0x49c 0x000 0x4 0x0
-#define MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x154 0x49c 0x000 0x5 0x0
-#define MX53_PAD_EIM_D30__USBOH3_USBH1_OC 0x154 0x49c 0x8a0 0x6 0x0
-#define MX53_PAD_EIM_D30__USBOH3_USBH2_OC 0x154 0x49c 0x8a4 0x7 0x1
-#define MX53_PAD_EIM_D31__EMI_WEIM_D_31 0x158 0x4a0 0x000 0x0 0x0
-#define MX53_PAD_EIM_D31__GPIO3_31 0x158 0x4a0 0x000 0x1 0x0
-#define MX53_PAD_EIM_D31__UART3_RTS 0x158 0x4a0 0x884 0x2 0x3
-#define MX53_PAD_EIM_D31__IPU_CSI0_D_2 0x158 0x4a0 0x000 0x3 0x0
-#define MX53_PAD_EIM_D31__IPU_DI0_PIN12 0x158 0x4a0 0x000 0x4 0x0
-#define MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x158 0x4a0 0x000 0x5 0x0
-#define MX53_PAD_EIM_D31__USBOH3_USBH1_PWR 0x158 0x4a0 0x000 0x6 0x0
-#define MX53_PAD_EIM_D31__USBOH3_USBH2_PWR 0x158 0x4a0 0x000 0x7 0x0
-#define MX53_PAD_EIM_A24__EMI_WEIM_A_24 0x15c 0x4a8 0x000 0x0 0x0
-#define MX53_PAD_EIM_A24__GPIO5_4 0x15c 0x4a8 0x000 0x1 0x0
-#define MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x15c 0x4a8 0x000 0x2 0x0
-#define MX53_PAD_EIM_A24__IPU_CSI1_D_19 0x15c 0x4a8 0x000 0x3 0x0
-#define MX53_PAD_EIM_A24__IPU_SISG_2 0x15c 0x4a8 0x000 0x6 0x0
-#define MX53_PAD_EIM_A24__USBPHY2_BVALID 0x15c 0x4a8 0x000 0x7 0x0
-#define MX53_PAD_EIM_A23__EMI_WEIM_A_23 0x160 0x4ac 0x000 0x0 0x0
-#define MX53_PAD_EIM_A23__GPIO6_6 0x160 0x4ac 0x000 0x1 0x0
-#define MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x160 0x4ac 0x000 0x2 0x0
-#define MX53_PAD_EIM_A23__IPU_CSI1_D_18 0x160 0x4ac 0x000 0x3 0x0
-#define MX53_PAD_EIM_A23__IPU_SISG_3 0x160 0x4ac 0x000 0x6 0x0
-#define MX53_PAD_EIM_A23__USBPHY2_ENDSESSION 0x160 0x4ac 0x000 0x7 0x0
-#define MX53_PAD_EIM_A22__EMI_WEIM_A_22 0x164 0x4b0 0x000 0x0 0x0
-#define MX53_PAD_EIM_A22__GPIO2_16 0x164 0x4b0 0x000 0x1 0x0
-#define MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x164 0x4b0 0x000 0x2 0x0
-#define MX53_PAD_EIM_A22__IPU_CSI1_D_17 0x164 0x4b0 0x000 0x3 0x0
-#define MX53_PAD_EIM_A22__SRC_BT_CFG1_7 0x164 0x4b0 0x000 0x7 0x0
-#define MX53_PAD_EIM_A21__EMI_WEIM_A_21 0x168 0x4b4 0x000 0x0 0x0
-#define MX53_PAD_EIM_A21__GPIO2_17 0x168 0x4b4 0x000 0x1 0x0
-#define MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x168 0x4b4 0x000 0x2 0x0
-#define MX53_PAD_EIM_A21__IPU_CSI1_D_16 0x168 0x4b4 0x000 0x3 0x0
-#define MX53_PAD_EIM_A21__SRC_BT_CFG1_6 0x168 0x4b4 0x000 0x7 0x0
-#define MX53_PAD_EIM_A20__EMI_WEIM_A_20 0x16c 0x4b8 0x000 0x0 0x0
-#define MX53_PAD_EIM_A20__GPIO2_18 0x16c 0x4b8 0x000 0x1 0x0
-#define MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x16c 0x4b8 0x000 0x2 0x0
-#define MX53_PAD_EIM_A20__IPU_CSI1_D_15 0x16c 0x4b8 0x000 0x3 0x0
-#define MX53_PAD_EIM_A20__SRC_BT_CFG1_5 0x16c 0x4b8 0x000 0x7 0x0
-#define MX53_PAD_EIM_A19__EMI_WEIM_A_19 0x170 0x4bc 0x000 0x0 0x0
-#define MX53_PAD_EIM_A19__GPIO2_19 0x170 0x4bc 0x000 0x1 0x0
-#define MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x170 0x4bc 0x000 0x2 0x0
-#define MX53_PAD_EIM_A19__IPU_CSI1_D_14 0x170 0x4bc 0x000 0x3 0x0
-#define MX53_PAD_EIM_A19__SRC_BT_CFG1_4 0x170 0x4bc 0x000 0x7 0x0
-#define MX53_PAD_EIM_A18__EMI_WEIM_A_18 0x174 0x4c0 0x000 0x0 0x0
-#define MX53_PAD_EIM_A18__GPIO2_20 0x174 0x4c0 0x000 0x1 0x0
-#define MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x174 0x4c0 0x000 0x2 0x0
-#define MX53_PAD_EIM_A18__IPU_CSI1_D_13 0x174 0x4c0 0x000 0x3 0x0
-#define MX53_PAD_EIM_A18__SRC_BT_CFG1_3 0x174 0x4c0 0x000 0x7 0x0
-#define MX53_PAD_EIM_A17__EMI_WEIM_A_17 0x178 0x4c4 0x000 0x0 0x0
-#define MX53_PAD_EIM_A17__GPIO2_21 0x178 0x4c4 0x000 0x1 0x0
-#define MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x178 0x4c4 0x000 0x2 0x0
-#define MX53_PAD_EIM_A17__IPU_CSI1_D_12 0x178 0x4c4 0x000 0x3 0x0
-#define MX53_PAD_EIM_A17__SRC_BT_CFG1_2 0x178 0x4c4 0x000 0x7 0x0
-#define MX53_PAD_EIM_A16__EMI_WEIM_A_16 0x17c 0x4c8 0x000 0x0 0x0
-#define MX53_PAD_EIM_A16__GPIO2_22 0x17c 0x4c8 0x000 0x1 0x0
-#define MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x17c 0x4c8 0x000 0x2 0x0
-#define MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK 0x17c 0x4c8 0x000 0x3 0x0
-#define MX53_PAD_EIM_A16__SRC_BT_CFG1_1 0x17c 0x4c8 0x000 0x7 0x0
-#define MX53_PAD_EIM_CS0__EMI_WEIM_CS_0 0x180 0x4cc 0x000 0x0 0x0
-#define MX53_PAD_EIM_CS0__GPIO2_23 0x180 0x4cc 0x000 0x1 0x0
-#define MX53_PAD_EIM_CS0__ECSPI2_SCLK 0x180 0x4cc 0x7b8 0x2 0x2
-#define MX53_PAD_EIM_CS0__IPU_DI1_PIN5 0x180 0x4cc 0x000 0x3 0x0
-#define MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 0x184 0x4d0 0x000 0x0 0x0
-#define MX53_PAD_EIM_CS1__GPIO2_24 0x184 0x4d0 0x000 0x1 0x0
-#define MX53_PAD_EIM_CS1__ECSPI2_MOSI 0x184 0x4d0 0x7c0 0x2 0x2
-#define MX53_PAD_EIM_CS1__IPU_DI1_PIN6 0x184 0x4d0 0x000 0x3 0x0
-#define MX53_PAD_EIM_OE__EMI_WEIM_OE 0x188 0x4d4 0x000 0x0 0x0
-#define MX53_PAD_EIM_OE__GPIO2_25 0x188 0x4d4 0x000 0x1 0x0
-#define MX53_PAD_EIM_OE__ECSPI2_MISO 0x188 0x4d4 0x7bc 0x2 0x2
-#define MX53_PAD_EIM_OE__IPU_DI1_PIN7 0x188 0x4d4 0x000 0x3 0x0
-#define MX53_PAD_EIM_OE__USBPHY2_IDDIG 0x188 0x4d4 0x000 0x7 0x0
-#define MX53_PAD_EIM_RW__EMI_WEIM_RW 0x18c 0x4d8 0x000 0x0 0x0
-#define MX53_PAD_EIM_RW__GPIO2_26 0x18c 0x4d8 0x000 0x1 0x0
-#define MX53_PAD_EIM_RW__ECSPI2_SS0 0x18c 0x4d8 0x7c4 0x2 0x2
-#define MX53_PAD_EIM_RW__IPU_DI1_PIN8 0x18c 0x4d8 0x000 0x3 0x0
-#define MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT 0x18c 0x4d8 0x000 0x7 0x0
-#define MX53_PAD_EIM_LBA__EMI_WEIM_LBA 0x190 0x4dc 0x000 0x0 0x0
-#define MX53_PAD_EIM_LBA__GPIO2_27 0x190 0x4dc 0x000 0x1 0x0
-#define MX53_PAD_EIM_LBA__ECSPI2_SS1 0x190 0x4dc 0x7c8 0x2 0x1
-#define MX53_PAD_EIM_LBA__IPU_DI1_PIN17 0x190 0x4dc 0x000 0x3 0x0
-#define MX53_PAD_EIM_LBA__SRC_BT_CFG1_0 0x190 0x4dc 0x000 0x7 0x0
-#define MX53_PAD_EIM_EB0__EMI_WEIM_EB_0 0x194 0x4e4 0x000 0x0 0x0
-#define MX53_PAD_EIM_EB0__GPIO2_28 0x194 0x4e4 0x000 0x1 0x0
-#define MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x194 0x4e4 0x000 0x3 0x0
-#define MX53_PAD_EIM_EB0__IPU_CSI1_D_11 0x194 0x4e4 0x000 0x4 0x0
-#define MX53_PAD_EIM_EB0__GPC_PMIC_RDY 0x194 0x4e4 0x810 0x5 0x0
-#define MX53_PAD_EIM_EB0__SRC_BT_CFG2_7 0x194 0x4e4 0x000 0x7 0x0
-#define MX53_PAD_EIM_EB1__EMI_WEIM_EB_1 0x198 0x4e8 0x000 0x0 0x0
-#define MX53_PAD_EIM_EB1__GPIO2_29 0x198 0x4e8 0x000 0x1 0x0
-#define MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x198 0x4e8 0x000 0x3 0x0
-#define MX53_PAD_EIM_EB1__IPU_CSI1_D_10 0x198 0x4e8 0x000 0x4 0x0
-#define MX53_PAD_EIM_EB1__SRC_BT_CFG2_6 0x198 0x4e8 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 0x19c 0x4ec 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA0__GPIO3_0 0x19c 0x4ec 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x19c 0x4ec 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA0__IPU_CSI1_D_9 0x19c 0x4ec 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA0__SRC_BT_CFG2_5 0x19c 0x4ec 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 0x1a0 0x4f0 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA1__GPIO3_1 0x1a0 0x4f0 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x1a0 0x4f0 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA1__IPU_CSI1_D_8 0x1a0 0x4f0 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA1__SRC_BT_CFG2_4 0x1a0 0x4f0 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 0x1a4 0x4f4 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA2__GPIO3_2 0x1a4 0x4f4 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x1a4 0x4f4 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA2__IPU_CSI1_D_7 0x1a4 0x4f4 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA2__SRC_BT_CFG2_3 0x1a4 0x4f4 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 0x1a8 0x4f8 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA3__GPIO3_3 0x1a8 0x4f8 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x1a8 0x4f8 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA3__IPU_CSI1_D_6 0x1a8 0x4f8 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA3__SRC_BT_CFG2_2 0x1a8 0x4f8 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 0x1ac 0x4fc 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA4__GPIO3_4 0x1ac 0x4fc 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x1ac 0x4fc 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA4__IPU_CSI1_D_5 0x1ac 0x4fc 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA4__SRC_BT_CFG3_7 0x1ac 0x4fc 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 0x1b0 0x500 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA5__GPIO3_5 0x1b0 0x500 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x1b0 0x500 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA5__IPU_CSI1_D_4 0x1b0 0x500 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 0x1b0 0x500 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 0x1b4 0x504 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA6__GPIO3_6 0x1b4 0x504 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x1b4 0x504 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA6__IPU_CSI1_D_3 0x1b4 0x504 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA6__SRC_BT_CFG3_5 0x1b4 0x504 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 0x1b8 0x508 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA7__GPIO3_7 0x1b8 0x508 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x1b8 0x508 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA7__IPU_CSI1_D_2 0x1b8 0x508 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA7__SRC_BT_CFG3_4 0x1b8 0x508 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8 0x1bc 0x50c 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA8__GPIO3_8 0x1bc 0x50c 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x1bc 0x50c 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA8__IPU_CSI1_D_1 0x1bc 0x50c 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA8__SRC_BT_CFG3_3 0x1bc 0x50c 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9 0x1c0 0x510 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA9__GPIO3_9 0x1c0 0x510 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x1c0 0x510 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA9__IPU_CSI1_D_0 0x1c0 0x510 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA9__SRC_BT_CFG3_2 0x1c0 0x510 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10 0x1c4 0x514 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA10__GPIO3_10 0x1c4 0x514 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x1c4 0x514 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN 0x1c4 0x514 0x834 0x4 0x1
-#define MX53_PAD_EIM_DA10__SRC_BT_CFG3_1 0x1c4 0x514 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11 0x1c8 0x518 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA11__GPIO3_11 0x1c8 0x518 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA11__IPU_DI1_PIN2 0x1c8 0x518 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC 0x1c8 0x518 0x838 0x4 0x1
-#define MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12 0x1cc 0x51c 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA12__GPIO3_12 0x1cc 0x51c 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA12__IPU_DI1_PIN3 0x1cc 0x51c 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC 0x1cc 0x51c 0x83c 0x4 0x1
-#define MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13 0x1d0 0x520 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA13__GPIO3_13 0x1d0 0x520 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA13__IPU_DI1_D0_CS 0x1d0 0x520 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK 0x1d0 0x520 0x76c 0x4 0x1
-#define MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14 0x1d4 0x524 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA14__GPIO3_14 0x1d4 0x524 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA14__IPU_DI1_D1_CS 0x1d4 0x524 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK 0x1d4 0x524 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15 0x1d8 0x528 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA15__GPIO3_15 0x1d8 0x528 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA15__IPU_DI1_PIN1 0x1d8 0x528 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA15__IPU_DI1_PIN4 0x1d8 0x528 0x000 0x4 0x0
-#define MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x1dc 0x52c 0x000 0x0 0x0
-#define MX53_PAD_NANDF_WE_B__GPIO6_12 0x1dc 0x52c 0x000 0x1 0x0
-#define MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x1e0 0x530 0x000 0x0 0x0
-#define MX53_PAD_NANDF_RE_B__GPIO6_13 0x1e0 0x530 0x000 0x1 0x0
-#define MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT 0x1e4 0x534 0x000 0x0 0x0
-#define MX53_PAD_EIM_WAIT__GPIO5_0 0x1e4 0x534 0x000 0x1 0x0
-#define MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B 0x1e4 0x534 0x000 0x2 0x0
-#define MX53_PAD_LVDS1_TX3_P__GPIO6_22 0x1ec 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x1ec 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS1_TX2_P__GPIO6_24 0x1f0 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x1f0 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS1_CLK_P__GPIO6_26 0x1f4 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x1f4 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS1_TX1_P__GPIO6_28 0x1f8 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x1f8 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS1_TX0_P__GPIO6_30 0x1fc 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x1fc 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS0_TX3_P__GPIO7_22 0x200 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x200 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS0_CLK_P__GPIO7_24 0x204 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x204 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS0_TX2_P__GPIO7_26 0x208 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x208 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS0_TX1_P__GPIO7_28 0x20c 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x20c 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS0_TX0_P__GPIO7_30 0x210 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x210 0x000 0x000 0x1 0x0
-#define MX53_PAD_GPIO_10__GPIO4_0 0x214 0x540 0x000 0x0 0x0
-#define MX53_PAD_GPIO_10__OSC32k_32K_OUT 0x214 0x540 0x000 0x1 0x0
-#define MX53_PAD_GPIO_11__GPIO4_1 0x218 0x544 0x000 0x0 0x0
-#define MX53_PAD_GPIO_12__GPIO4_2 0x21c 0x548 0x000 0x0 0x0
-#define MX53_PAD_GPIO_13__GPIO4_3 0x220 0x54c 0x000 0x0 0x0
-#define MX53_PAD_GPIO_14__GPIO4_4 0x224 0x550 0x000 0x0 0x0
-#define MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x228 0x5a0 0x000 0x0 0x0
-#define MX53_PAD_NANDF_CLE__GPIO6_7 0x228 0x5a0 0x000 0x1 0x0
-#define MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0 0x228 0x5a0 0x000 0x7 0x0
-#define MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x22c 0x5a4 0x000 0x0 0x0
-#define MX53_PAD_NANDF_ALE__GPIO6_8 0x22c 0x5a4 0x000 0x1 0x0
-#define MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1 0x22c 0x5a4 0x000 0x7 0x0
-#define MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0x230 0x5a8 0x000 0x0 0x0
-#define MX53_PAD_NANDF_WP_B__GPIO6_9 0x230 0x5a8 0x000 0x1 0x0
-#define MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2 0x230 0x5a8 0x000 0x7 0x0
-#define MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0x234 0x5ac 0x000 0x0 0x0
-#define MX53_PAD_NANDF_RB0__GPIO6_10 0x234 0x5ac 0x000 0x1 0x0
-#define MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3 0x234 0x5ac 0x000 0x7 0x0
-#define MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x238 0x5b0 0x000 0x0 0x0
-#define MX53_PAD_NANDF_CS0__GPIO6_11 0x238 0x5b0 0x000 0x1 0x0
-#define MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4 0x238 0x5b0 0x000 0x7 0x0
-#define MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1 0x23c 0x5b4 0x000 0x0 0x0
-#define MX53_PAD_NANDF_CS1__GPIO6_14 0x23c 0x5b4 0x000 0x1 0x0
-#define MX53_PAD_NANDF_CS1__MLB_MLBCLK 0x23c 0x5b4 0x858 0x6 0x0
-#define MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5 0x23c 0x5b4 0x000 0x7 0x0
-#define MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2 0x240 0x5b8 0x000 0x0 0x0
-#define MX53_PAD_NANDF_CS2__GPIO6_15 0x240 0x5b8 0x000 0x1 0x0
-#define MX53_PAD_NANDF_CS2__IPU_SISG_0 0x240 0x5b8 0x000 0x2 0x0
-#define MX53_PAD_NANDF_CS2__ESAI1_TX0 0x240 0x5b8 0x7e4 0x3 0x0
-#define MX53_PAD_NANDF_CS2__EMI_WEIM_CRE 0x240 0x5b8 0x000 0x4 0x0
-#define MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK 0x240 0x5b8 0x000 0x5 0x0
-#define MX53_PAD_NANDF_CS2__MLB_MLBSIG 0x240 0x5b8 0x860 0x6 0x0
-#define MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6 0x240 0x5b8 0x000 0x7 0x0
-#define MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3 0x244 0x5bc 0x000 0x0 0x0
-#define MX53_PAD_NANDF_CS3__GPIO6_16 0x244 0x5bc 0x000 0x1 0x0
-#define MX53_PAD_NANDF_CS3__IPU_SISG_1 0x244 0x5bc 0x000 0x2 0x0
-#define MX53_PAD_NANDF_CS3__ESAI1_TX1 0x244 0x5bc 0x7e8 0x3 0x0
-#define MX53_PAD_NANDF_CS3__EMI_WEIM_A_26 0x244 0x5bc 0x000 0x4 0x0
-#define MX53_PAD_NANDF_CS3__MLB_MLBDAT 0x244 0x5bc 0x85c 0x6 0x0
-#define MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7 0x244 0x5bc 0x000 0x7 0x0
-#define MX53_PAD_FEC_MDIO__FEC_MDIO 0x248 0x5c4 0x804 0x0 0x1
-#define MX53_PAD_FEC_MDIO__GPIO1_22 0x248 0x5c4 0x000 0x1 0x0
-#define MX53_PAD_FEC_MDIO__ESAI1_SCKR 0x248 0x5c4 0x7dc 0x2 0x0
-#define MX53_PAD_FEC_MDIO__FEC_COL 0x248 0x5c4 0x800 0x3 0x1
-#define MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2 0x248 0x5c4 0x000 0x4 0x0
-#define MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3 0x248 0x5c4 0x000 0x5 0x0
-#define MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49 0x248 0x5c4 0x000 0x6 0x0
-#define MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x24c 0x5c8 0x000 0x0 0x0
-#define MX53_PAD_FEC_REF_CLK__GPIO1_23 0x24c 0x5c8 0x000 0x1 0x0
-#define MX53_PAD_FEC_REF_CLK__ESAI1_FSR 0x24c 0x5c8 0x7cc 0x2 0x0
-#define MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4 0x24c 0x5c8 0x000 0x5 0x0
-#define MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50 0x24c 0x5c8 0x000 0x6 0x0
-#define MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x250 0x5cc 0x000 0x0 0x0
-#define MX53_PAD_FEC_RX_ER__GPIO1_24 0x250 0x5cc 0x000 0x1 0x0
-#define MX53_PAD_FEC_RX_ER__ESAI1_HCKR 0x250 0x5cc 0x7d4 0x2 0x0
-#define MX53_PAD_FEC_RX_ER__FEC_RX_CLK 0x250 0x5cc 0x808 0x3 0x1
-#define MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3 0x250 0x5cc 0x000 0x4 0x0
-#define MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x254 0x5d0 0x000 0x0 0x0
-#define MX53_PAD_FEC_CRS_DV__GPIO1_25 0x254 0x5d0 0x000 0x1 0x0
-#define MX53_PAD_FEC_CRS_DV__ESAI1_SCKT 0x254 0x5d0 0x7e0 0x2 0x0
-#define MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x258 0x5d4 0x000 0x0 0x0
-#define MX53_PAD_FEC_RXD1__GPIO1_26 0x258 0x5d4 0x000 0x1 0x0
-#define MX53_PAD_FEC_RXD1__ESAI1_FST 0x258 0x5d4 0x7d0 0x2 0x0
-#define MX53_PAD_FEC_RXD1__MLB_MLBSIG 0x258 0x5d4 0x860 0x3 0x1
-#define MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1 0x258 0x5d4 0x000 0x4 0x0
-#define MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x25c 0x5d8 0x000 0x0 0x0
-#define MX53_PAD_FEC_RXD0__GPIO1_27 0x25c 0x5d8 0x000 0x1 0x0
-#define MX53_PAD_FEC_RXD0__ESAI1_HCKT 0x25c 0x5d8 0x7d8 0x2 0x0
-#define MX53_PAD_FEC_RXD0__OSC32k_32K_OUT 0x25c 0x5d8 0x000 0x3 0x0
-#define MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x260 0x5dc 0x000 0x0 0x0
-#define MX53_PAD_FEC_TX_EN__GPIO1_28 0x260 0x5dc 0x000 0x1 0x0
-#define MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2 0x260 0x5dc 0x7f0 0x2 0x0
-#define MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x264 0x5e0 0x000 0x0 0x0
-#define MX53_PAD_FEC_TXD1__GPIO1_29 0x264 0x5e0 0x000 0x1 0x0
-#define MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3 0x264 0x5e0 0x7ec 0x2 0x0
-#define MX53_PAD_FEC_TXD1__MLB_MLBCLK 0x264 0x5e0 0x858 0x3 0x1
-#define MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK 0x264 0x5e0 0x000 0x4 0x0
-#define MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x268 0x5e4 0x000 0x0 0x0
-#define MX53_PAD_FEC_TXD0__GPIO1_30 0x268 0x5e4 0x000 0x1 0x0
-#define MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1 0x268 0x5e4 0x7f4 0x2 0x0
-#define MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0 0x268 0x5e4 0x000 0x7 0x0
-#define MX53_PAD_FEC_MDC__FEC_MDC 0x26c 0x5e8 0x000 0x0 0x0
-#define MX53_PAD_FEC_MDC__GPIO1_31 0x26c 0x5e8 0x000 0x1 0x0
-#define MX53_PAD_FEC_MDC__ESAI1_TX5_RX0 0x26c 0x5e8 0x7f8 0x2 0x0
-#define MX53_PAD_FEC_MDC__MLB_MLBDAT 0x26c 0x5e8 0x85c 0x3 0x1
-#define MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG 0x26c 0x5e8 0x000 0x4 0x0
-#define MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1 0x26c 0x5e8 0x000 0x7 0x0
-#define MX53_PAD_PATA_DIOW__PATA_DIOW 0x270 0x5f0 0x000 0x0 0x0
-#define MX53_PAD_PATA_DIOW__GPIO6_17 0x270 0x5f0 0x000 0x1 0x0
-#define MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x270 0x5f0 0x000 0x3 0x0
-#define MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2 0x270 0x5f0 0x000 0x7 0x0
-#define MX53_PAD_PATA_DMACK__PATA_DMACK 0x274 0x5f4 0x000 0x0 0x0
-#define MX53_PAD_PATA_DMACK__GPIO6_18 0x274 0x5f4 0x000 0x1 0x0
-#define MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x274 0x5f4 0x878 0x3 0x3
-#define MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3 0x274 0x5f4 0x000 0x7 0x0
-#define MX53_PAD_PATA_DMARQ__PATA_DMARQ 0x278 0x5f8 0x000 0x0 0x0
-#define MX53_PAD_PATA_DMARQ__GPIO7_0 0x278 0x5f8 0x000 0x1 0x0
-#define MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x278 0x5f8 0x000 0x3 0x0
-#define MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0 0x278 0x5f8 0x000 0x5 0x0
-#define MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4 0x278 0x5f8 0x000 0x7 0x0
-#define MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN 0x27c 0x5fc 0x000 0x0 0x0
-#define MX53_PAD_PATA_BUFFER_EN__GPIO7_1 0x27c 0x5fc 0x000 0x1 0x0
-#define MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x27c 0x5fc 0x880 0x3 0x3
-#define MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1 0x27c 0x5fc 0x000 0x5 0x0
-#define MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5 0x27c 0x5fc 0x000 0x7 0x0
-#define MX53_PAD_PATA_INTRQ__PATA_INTRQ 0x280 0x600 0x000 0x0 0x0
-#define MX53_PAD_PATA_INTRQ__GPIO7_2 0x280 0x600 0x000 0x1 0x0
-#define MX53_PAD_PATA_INTRQ__UART2_CTS 0x280 0x600 0x000 0x3 0x0
-#define MX53_PAD_PATA_INTRQ__CAN1_TXCAN 0x280 0x600 0x000 0x4 0x0
-#define MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2 0x280 0x600 0x000 0x5 0x0
-#define MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6 0x280 0x600 0x000 0x7 0x0
-#define MX53_PAD_PATA_DIOR__PATA_DIOR 0x284 0x604 0x000 0x0 0x0
-#define MX53_PAD_PATA_DIOR__GPIO7_3 0x284 0x604 0x000 0x1 0x0
-#define MX53_PAD_PATA_DIOR__UART2_RTS 0x284 0x604 0x87c 0x3 0x3
-#define MX53_PAD_PATA_DIOR__CAN1_RXCAN 0x284 0x604 0x760 0x4 0x1
-#define MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7 0x284 0x604 0x000 0x7 0x0
-#define MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B 0x288 0x608 0x000 0x0 0x0
-#define MX53_PAD_PATA_RESET_B__GPIO7_4 0x288 0x608 0x000 0x1 0x0
-#define MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x288 0x608 0x000 0x2 0x0
-#define MX53_PAD_PATA_RESET_B__UART1_CTS 0x288 0x608 0x000 0x3 0x0
-#define MX53_PAD_PATA_RESET_B__CAN2_TXCAN 0x288 0x608 0x000 0x4 0x0
-#define MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 0x288 0x608 0x000 0x7 0x0
-#define MX53_PAD_PATA_IORDY__PATA_IORDY 0x28c 0x60c 0x000 0x0 0x0
-#define MX53_PAD_PATA_IORDY__GPIO7_5 0x28c 0x60c 0x000 0x1 0x0
-#define MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x28c 0x60c 0x000 0x2 0x0
-#define MX53_PAD_PATA_IORDY__UART1_RTS 0x28c 0x60c 0x874 0x3 0x3
-#define MX53_PAD_PATA_IORDY__CAN2_RXCAN 0x28c 0x60c 0x764 0x4 0x1
-#define MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 0x28c 0x60c 0x000 0x7 0x0
-#define MX53_PAD_PATA_DA_0__PATA_DA_0 0x290 0x610 0x000 0x0 0x0
-#define MX53_PAD_PATA_DA_0__GPIO7_6 0x290 0x610 0x000 0x1 0x0
-#define MX53_PAD_PATA_DA_0__ESDHC3_RST 0x290 0x610 0x000 0x2 0x0
-#define MX53_PAD_PATA_DA_0__OWIRE_LINE 0x290 0x610 0x864 0x4 0x0
-#define MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2 0x290 0x610 0x000 0x7 0x0
-#define MX53_PAD_PATA_DA_1__PATA_DA_1 0x294 0x614 0x000 0x0 0x0
-#define MX53_PAD_PATA_DA_1__GPIO7_7 0x294 0x614 0x000 0x1 0x0
-#define MX53_PAD_PATA_DA_1__ESDHC4_CMD 0x294 0x614 0x000 0x2 0x0
-#define MX53_PAD_PATA_DA_1__UART3_CTS 0x294 0x614 0x000 0x4 0x0
-#define MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3 0x294 0x614 0x000 0x7 0x0
-#define MX53_PAD_PATA_DA_2__PATA_DA_2 0x298 0x618 0x000 0x0 0x0
-#define MX53_PAD_PATA_DA_2__GPIO7_8 0x298 0x618 0x000 0x1 0x0
-#define MX53_PAD_PATA_DA_2__ESDHC4_CLK 0x298 0x618 0x000 0x2 0x0
-#define MX53_PAD_PATA_DA_2__UART3_RTS 0x298 0x618 0x884 0x4 0x5
-#define MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4 0x298 0x618 0x000 0x7 0x0
-#define MX53_PAD_PATA_CS_0__PATA_CS_0 0x29c 0x61c 0x000 0x0 0x0
-#define MX53_PAD_PATA_CS_0__GPIO7_9 0x29c 0x61c 0x000 0x1 0x0
-#define MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x29c 0x61c 0x000 0x4 0x0
-#define MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5 0x29c 0x61c 0x000 0x7 0x0
-#define MX53_PAD_PATA_CS_1__PATA_CS_1 0x2a0 0x620 0x000 0x0 0x0
-#define MX53_PAD_PATA_CS_1__GPIO7_10 0x2a0 0x620 0x000 0x1 0x0
-#define MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x2a0 0x620 0x888 0x4 0x3
-#define MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6 0x2a0 0x620 0x000 0x7 0x0
-#define MX53_PAD_PATA_DATA0__PATA_DATA_0 0x2a4 0x628 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA0__GPIO2_0 0x2a4 0x628 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 0x2a4 0x628 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x2a4 0x628 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0 0x2a4 0x628 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0 0x2a4 0x628 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7 0x2a4 0x628 0x000 0x7 0x0
-#define MX53_PAD_PATA_DATA1__PATA_DATA_1 0x2a8 0x62c 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA1__GPIO2_1 0x2a8 0x62c 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 0x2a8 0x62c 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x2a8 0x62c 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1 0x2a8 0x62c 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1 0x2a8 0x62c 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA2__PATA_DATA_2 0x2ac 0x630 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA2__GPIO2_2 0x2ac 0x630 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 0x2ac 0x630 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x2ac 0x630 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2 0x2ac 0x630 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2 0x2ac 0x630 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA3__PATA_DATA_3 0x2b0 0x634 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA3__GPIO2_3 0x2b0 0x634 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 0x2b0 0x634 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x2b0 0x634 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3 0x2b0 0x634 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3 0x2b0 0x634 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA4__PATA_DATA_4 0x2b4 0x638 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA4__GPIO2_4 0x2b4 0x638 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 0x2b4 0x638 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA4__ESDHC4_DAT4 0x2b4 0x638 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4 0x2b4 0x638 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4 0x2b4 0x638 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA5__PATA_DATA_5 0x2b8 0x63c 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA5__GPIO2_5 0x2b8 0x63c 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 0x2b8 0x63c 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA5__ESDHC4_DAT5 0x2b8 0x63c 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5 0x2b8 0x63c 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5 0x2b8 0x63c 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA6__PATA_DATA_6 0x2bc 0x640 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA6__GPIO2_6 0x2bc 0x640 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 0x2bc 0x640 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA6__ESDHC4_DAT6 0x2bc 0x640 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 0x2bc 0x640 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 0x2bc 0x640 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA7__PATA_DATA_7 0x2c0 0x644 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA7__GPIO2_7 0x2c0 0x644 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 0x2c0 0x644 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA7__ESDHC4_DAT7 0x2c0 0x644 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7 0x2c0 0x644 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7 0x2c0 0x644 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA8__PATA_DATA_8 0x2c4 0x648 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA8__GPIO2_8 0x2c4 0x648 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA8__ESDHC1_DAT4 0x2c4 0x648 0x000 0x2 0x0
-#define MX53_PAD_PATA_DATA8__EMI_NANDF_D_8 0x2c4 0x648 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x2c4 0x648 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8 0x2c4 0x648 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8 0x2c4 0x648 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA9__PATA_DATA_9 0x2c8 0x64c 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA9__GPIO2_9 0x2c8 0x64c 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA9__ESDHC1_DAT5 0x2c8 0x64c 0x000 0x2 0x0
-#define MX53_PAD_PATA_DATA9__EMI_NANDF_D_9 0x2c8 0x64c 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x2c8 0x64c 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9 0x2c8 0x64c 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9 0x2c8 0x64c 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA10__PATA_DATA_10 0x2cc 0x650 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA10__GPIO2_10 0x2cc 0x650 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA10__ESDHC1_DAT6 0x2cc 0x650 0x000 0x2 0x0
-#define MX53_PAD_PATA_DATA10__EMI_NANDF_D_10 0x2cc 0x650 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x2cc 0x650 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10 0x2cc 0x650 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10 0x2cc 0x650 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA11__PATA_DATA_11 0x2d0 0x654 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA11__GPIO2_11 0x2d0 0x654 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA11__ESDHC1_DAT7 0x2d0 0x654 0x000 0x2 0x0
-#define MX53_PAD_PATA_DATA11__EMI_NANDF_D_11 0x2d0 0x654 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x2d0 0x654 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11 0x2d0 0x654 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11 0x2d0 0x654 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA12__PATA_DATA_12 0x2d4 0x658 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA12__GPIO2_12 0x2d4 0x658 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA12__ESDHC2_DAT4 0x2d4 0x658 0x000 0x2 0x0
-#define MX53_PAD_PATA_DATA12__EMI_NANDF_D_12 0x2d4 0x658 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA12__ESDHC4_DAT0 0x2d4 0x658 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12 0x2d4 0x658 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12 0x2d4 0x658 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA13__PATA_DATA_13 0x2d8 0x65c 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA13__GPIO2_13 0x2d8 0x65c 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA13__ESDHC2_DAT5 0x2d8 0x65c 0x000 0x2 0x0
-#define MX53_PAD_PATA_DATA13__EMI_NANDF_D_13 0x2d8 0x65c 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA13__ESDHC4_DAT1 0x2d8 0x65c 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13 0x2d8 0x65c 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13 0x2d8 0x65c 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA14__PATA_DATA_14 0x2dc 0x660 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA14__GPIO2_14 0x2dc 0x660 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA14__ESDHC2_DAT6 0x2dc 0x660 0x000 0x2 0x0
-#define MX53_PAD_PATA_DATA14__EMI_NANDF_D_14 0x2dc 0x660 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA14__ESDHC4_DAT2 0x2dc 0x660 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14 0x2dc 0x660 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14 0x2dc 0x660 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA15__PATA_DATA_15 0x2e0 0x664 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA15__GPIO2_15 0x2e0 0x664 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA15__ESDHC2_DAT7 0x2e0 0x664 0x000 0x2 0x0
-#define MX53_PAD_PATA_DATA15__EMI_NANDF_D_15 0x2e0 0x664 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA15__ESDHC4_DAT3 0x2e0 0x664 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15 0x2e0 0x664 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15 0x2e0 0x664 0x000 0x6 0x0
-#define MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x2e4 0x66c 0x000 0x0 0x0
-#define MX53_PAD_SD1_DATA0__GPIO1_16 0x2e4 0x66c 0x000 0x1 0x0
-#define MX53_PAD_SD1_DATA0__GPT_CAPIN1 0x2e4 0x66c 0x000 0x3 0x0
-#define MX53_PAD_SD1_DATA0__CSPI_MISO 0x2e4 0x66c 0x784 0x5 0x2
-#define MX53_PAD_SD1_DATA0__CCM_PLL3_BYP 0x2e4 0x66c 0x778 0x7 0x0
-#define MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x2e8 0x670 0x000 0x0 0x0
-#define MX53_PAD_SD1_DATA1__GPIO1_17 0x2e8 0x670 0x000 0x1 0x0
-#define MX53_PAD_SD1_DATA1__GPT_CAPIN2 0x2e8 0x670 0x000 0x3 0x0
-#define MX53_PAD_SD1_DATA1__CSPI_SS0 0x2e8 0x670 0x78c 0x5 0x3
-#define MX53_PAD_SD1_DATA1__CCM_PLL4_BYP 0x2e8 0x670 0x77c 0x7 0x1
-#define MX53_PAD_SD1_CMD__ESDHC1_CMD 0x2ec 0x674 0x000 0x0 0x0
-#define MX53_PAD_SD1_CMD__GPIO1_18 0x2ec 0x674 0x000 0x1 0x0
-#define MX53_PAD_SD1_CMD__GPT_CMPOUT1 0x2ec 0x674 0x000 0x3 0x0
-#define MX53_PAD_SD1_CMD__CSPI_MOSI 0x2ec 0x674 0x788 0x5 0x2
-#define MX53_PAD_SD1_CMD__CCM_PLL1_BYP 0x2ec 0x674 0x770 0x7 0x0
-#define MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x2f0 0x678 0x000 0x0 0x0
-#define MX53_PAD_SD1_DATA2__GPIO1_19 0x2f0 0x678 0x000 0x1 0x0
-#define MX53_PAD_SD1_DATA2__GPT_CMPOUT2 0x2f0 0x678 0x000 0x2 0x0
-#define MX53_PAD_SD1_DATA2__PWM2_PWMO 0x2f0 0x678 0x000 0x3 0x0
-#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_B 0x2f0 0x678 0x000 0x4 0x0
-#define MX53_PAD_SD1_DATA2__CSPI_SS1 0x2f0 0x678 0x790 0x5 0x2
-#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB 0x2f0 0x678 0x000 0x6 0x0
-#define MX53_PAD_SD1_DATA2__CCM_PLL2_BYP 0x2f0 0x678 0x774 0x7 0x0
-#define MX53_PAD_SD1_CLK__ESDHC1_CLK 0x2f4 0x67c 0x000 0x0 0x0
-#define MX53_PAD_SD1_CLK__GPIO1_20 0x2f4 0x67c 0x000 0x1 0x0
-#define MX53_PAD_SD1_CLK__OSC32k_32K_OUT 0x2f4 0x67c 0x000 0x2 0x0
-#define MX53_PAD_SD1_CLK__GPT_CLKIN 0x2f4 0x67c 0x000 0x3 0x0
-#define MX53_PAD_SD1_CLK__CSPI_SCLK 0x2f4 0x67c 0x780 0x5 0x2
-#define MX53_PAD_SD1_CLK__SATA_PHY_DTB_0 0x2f4 0x67c 0x000 0x7 0x0
-#define MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x2f8 0x680 0x000 0x0 0x0
-#define MX53_PAD_SD1_DATA3__GPIO1_21 0x2f8 0x680 0x000 0x1 0x0
-#define MX53_PAD_SD1_DATA3__GPT_CMPOUT3 0x2f8 0x680 0x000 0x2 0x0
-#define MX53_PAD_SD1_DATA3__PWM1_PWMO 0x2f8 0x680 0x000 0x3 0x0
-#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_B 0x2f8 0x680 0x000 0x4 0x0
-#define MX53_PAD_SD1_DATA3__CSPI_SS2 0x2f8 0x680 0x794 0x5 0x2
-#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB 0x2f8 0x680 0x000 0x6 0x0
-#define MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1 0x2f8 0x680 0x000 0x7 0x0
-#define MX53_PAD_SD2_CLK__ESDHC2_CLK 0x2fc 0x688 0x000 0x0 0x0
-#define MX53_PAD_SD2_CLK__GPIO1_10 0x2fc 0x688 0x000 0x1 0x0
-#define MX53_PAD_SD2_CLK__KPP_COL_5 0x2fc 0x688 0x840 0x2 0x2
-#define MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS 0x2fc 0x688 0x73c 0x3 0x1
-#define MX53_PAD_SD2_CLK__CSPI_SCLK 0x2fc 0x688 0x780 0x5 0x3
-#define MX53_PAD_SD2_CLK__SCC_RANDOM_V 0x2fc 0x688 0x000 0x7 0x0
-#define MX53_PAD_SD2_CMD__ESDHC2_CMD 0x300 0x68c 0x000 0x0 0x0
-#define MX53_PAD_SD2_CMD__GPIO1_11 0x300 0x68c 0x000 0x1 0x0
-#define MX53_PAD_SD2_CMD__KPP_ROW_5 0x300 0x68c 0x84c 0x2 0x1
-#define MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC 0x300 0x68c 0x738 0x3 0x1
-#define MX53_PAD_SD2_CMD__CSPI_MOSI 0x300 0x68c 0x788 0x5 0x3
-#define MX53_PAD_SD2_CMD__SCC_RANDOM 0x300 0x68c 0x000 0x7 0x0
-#define MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x304 0x690 0x000 0x0 0x0
-#define MX53_PAD_SD2_DATA3__GPIO1_12 0x304 0x690 0x000 0x1 0x0
-#define MX53_PAD_SD2_DATA3__KPP_COL_6 0x304 0x690 0x844 0x2 0x1
-#define MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC 0x304 0x690 0x740 0x3 0x1
-#define MX53_PAD_SD2_DATA3__CSPI_SS2 0x304 0x690 0x794 0x5 0x3
-#define MX53_PAD_SD2_DATA3__SJC_DONE 0x304 0x690 0x000 0x7 0x0
-#define MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x308 0x694 0x000 0x0 0x0
-#define MX53_PAD_SD2_DATA2__GPIO1_13 0x308 0x694 0x000 0x1 0x0
-#define MX53_PAD_SD2_DATA2__KPP_ROW_6 0x308 0x694 0x850 0x2 0x1
-#define MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD 0x308 0x694 0x734 0x3 0x1
-#define MX53_PAD_SD2_DATA2__CSPI_SS1 0x308 0x694 0x790 0x5 0x3
-#define MX53_PAD_SD2_DATA2__SJC_FAIL 0x308 0x694 0x000 0x7 0x0
-#define MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x30c 0x698 0x000 0x0 0x0
-#define MX53_PAD_SD2_DATA1__GPIO1_14 0x30c 0x698 0x000 0x1 0x0
-#define MX53_PAD_SD2_DATA1__KPP_COL_7 0x30c 0x698 0x848 0x2 0x1
-#define MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS 0x30c 0x698 0x744 0x3 0x1
-#define MX53_PAD_SD2_DATA1__CSPI_SS0 0x30c 0x698 0x78c 0x5 0x4
-#define MX53_PAD_SD2_DATA1__RTIC_SEC_VIO 0x30c 0x698 0x000 0x7 0x0
-#define MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x310 0x69c 0x000 0x0 0x0
-#define MX53_PAD_SD2_DATA0__GPIO1_15 0x310 0x69c 0x000 0x1 0x0
-#define MX53_PAD_SD2_DATA0__KPP_ROW_7 0x310 0x69c 0x854 0x2 0x1
-#define MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD 0x310 0x69c 0x730 0x3 0x1
-#define MX53_PAD_SD2_DATA0__CSPI_MISO 0x310 0x69c 0x784 0x5 0x3
-#define MX53_PAD_SD2_DATA0__RTIC_DONE_INT 0x310 0x69c 0x000 0x7 0x0
-#define MX53_PAD_GPIO_0__CCM_CLKO 0x314 0x6a4 0x000 0x0 0x0
-#define MX53_PAD_GPIO_0__GPIO1_0 0x314 0x6a4 0x000 0x1 0x0
-#define MX53_PAD_GPIO_0__KPP_COL_5 0x314 0x6a4 0x840 0x2 0x3
-#define MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x314 0x6a4 0x000 0x3 0x0
-#define MX53_PAD_GPIO_0__EPIT1_EPITO 0x314 0x6a4 0x000 0x4 0x0
-#define MX53_PAD_GPIO_0__SRTC_ALARM_DEB 0x314 0x6a4 0x000 0x5 0x0
-#define MX53_PAD_GPIO_0__USBOH3_USBH1_PWR 0x314 0x6a4 0x000 0x6 0x0
-#define MX53_PAD_GPIO_0__CSU_TD 0x314 0x6a4 0x000 0x7 0x0
-#define MX53_PAD_GPIO_1__ESAI1_SCKR 0x318 0x6a8 0x7dc 0x0 0x1
-#define MX53_PAD_GPIO_1__GPIO1_1 0x318 0x6a8 0x000 0x1 0x0
-#define MX53_PAD_GPIO_1__KPP_ROW_5 0x318 0x6a8 0x84c 0x2 0x2
-#define MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK 0x318 0x6a8 0x000 0x3 0x0
-#define MX53_PAD_GPIO_1__PWM2_PWMO 0x318 0x6a8 0x000 0x4 0x0
-#define MX53_PAD_GPIO_1__WDOG2_WDOG_B 0x318 0x6a8 0x000 0x5 0x0
-#define MX53_PAD_GPIO_1__ESDHC1_CD 0x318 0x6a8 0x000 0x6 0x0
-#define MX53_PAD_GPIO_1__SRC_TESTER_ACK 0x318 0x6a8 0x000 0x7 0x0
-#define MX53_PAD_GPIO_9__ESAI1_FSR 0x31c 0x6ac 0x7cc 0x0 0x1
-#define MX53_PAD_GPIO_9__GPIO1_9 0x31c 0x6ac 0x000 0x1 0x0
-#define MX53_PAD_GPIO_9__KPP_COL_6 0x31c 0x6ac 0x844 0x2 0x2
-#define MX53_PAD_GPIO_9__CCM_REF_EN_B 0x31c 0x6ac 0x000 0x3 0x0
-#define MX53_PAD_GPIO_9__PWM1_PWMO 0x31c 0x6ac 0x000 0x4 0x0
-#define MX53_PAD_GPIO_9__WDOG1_WDOG_B 0x31c 0x6ac 0x000 0x5 0x0
-#define MX53_PAD_GPIO_9__ESDHC1_WP 0x31c 0x6ac 0x7fc 0x6 0x1
-#define MX53_PAD_GPIO_9__SCC_FAIL_STATE 0x31c 0x6ac 0x000 0x7 0x0
-#define MX53_PAD_GPIO_3__ESAI1_HCKR 0x320 0x6b0 0x7d4 0x0 0x1
-#define MX53_PAD_GPIO_3__GPIO1_3 0x320 0x6b0 0x000 0x1 0x0
-#define MX53_PAD_GPIO_3__I2C3_SCL 0x320 0x6b0 0x824 0x2 0x1
-#define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN 0x320 0x6b0 0x000 0x3 0x0
-#define MX53_PAD_GPIO_3__CCM_CLKO2 0x320 0x6b0 0x000 0x4 0x0
-#define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 0x320 0x6b0 0x000 0x5 0x0
-#define MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x320 0x6b0 0x8a0 0x6 0x1
-#define MX53_PAD_GPIO_3__MLB_MLBCLK 0x320 0x6b0 0x858 0x7 0x2
-#define MX53_PAD_GPIO_6__ESAI1_SCKT 0x324 0x6b4 0x7e0 0x0 0x1
-#define MX53_PAD_GPIO_6__GPIO1_6 0x324 0x6b4 0x000 0x1 0x0
-#define MX53_PAD_GPIO_6__I2C3_SDA 0x324 0x6b4 0x828 0x2 0x1
-#define MX53_PAD_GPIO_6__CCM_CCM_OUT_0 0x324 0x6b4 0x000 0x3 0x0
-#define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB 0x324 0x6b4 0x000 0x4 0x0
-#define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 0x324 0x6b4 0x000 0x5 0x0
-#define MX53_PAD_GPIO_6__ESDHC2_LCTL 0x324 0x6b4 0x000 0x6 0x0
-#define MX53_PAD_GPIO_6__MLB_MLBSIG 0x324 0x6b4 0x860 0x7 0x2
-#define MX53_PAD_GPIO_2__ESAI1_FST 0x328 0x6b8 0x7d0 0x0 0x1
-#define MX53_PAD_GPIO_2__GPIO1_2 0x328 0x6b8 0x000 0x1 0x0
-#define MX53_PAD_GPIO_2__KPP_ROW_6 0x328 0x6b8 0x850 0x2 0x2
-#define MX53_PAD_GPIO_2__CCM_CCM_OUT_1 0x328 0x6b8 0x000 0x3 0x0
-#define MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 0x328 0x6b8 0x000 0x4 0x0
-#define MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2 0x328 0x6b8 0x000 0x5 0x0
-#define MX53_PAD_GPIO_2__ESDHC2_WP 0x328 0x6b8 0x000 0x6 0x0
-#define MX53_PAD_GPIO_2__MLB_MLBDAT 0x328 0x6b8 0x85c 0x7 0x2
-#define MX53_PAD_GPIO_4__ESAI1_HCKT 0x32c 0x6bc 0x7d8 0x0 0x1
-#define MX53_PAD_GPIO_4__GPIO1_4 0x32c 0x6bc 0x000 0x1 0x0
-#define MX53_PAD_GPIO_4__KPP_COL_7 0x32c 0x6bc 0x848 0x2 0x2
-#define MX53_PAD_GPIO_4__CCM_CCM_OUT_2 0x32c 0x6bc 0x000 0x3 0x0
-#define MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 0x32c 0x6bc 0x000 0x4 0x0
-#define MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3 0x32c 0x6bc 0x000 0x5 0x0
-#define MX53_PAD_GPIO_4__ESDHC2_CD 0x32c 0x6bc 0x000 0x6 0x0
-#define MX53_PAD_GPIO_4__SCC_SEC_STATE 0x32c 0x6bc 0x000 0x7 0x0
-#define MX53_PAD_GPIO_5__ESAI1_TX2_RX3 0x330 0x6c0 0x7ec 0x0 0x1
-#define MX53_PAD_GPIO_5__GPIO1_5 0x330 0x6c0 0x000 0x1 0x0
-#define MX53_PAD_GPIO_5__KPP_ROW_7 0x330 0x6c0 0x854 0x2 0x2
-#define MX53_PAD_GPIO_5__CCM_CLKO 0x330 0x6c0 0x000 0x3 0x0
-#define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 0x330 0x6c0 0x000 0x4 0x0
-#define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 0x330 0x6c0 0x000 0x5 0x0
-#define MX53_PAD_GPIO_5__I2C3_SCL 0x330 0x6c0 0x824 0x6 0x2
-#define MX53_PAD_GPIO_5__CCM_PLL1_BYP 0x330 0x6c0 0x770 0x7 0x1
-#define MX53_PAD_GPIO_7__ESAI1_TX4_RX1 0x334 0x6c4 0x7f4 0x0 0x1
-#define MX53_PAD_GPIO_7__GPIO1_7 0x334 0x6c4 0x000 0x1 0x0
-#define MX53_PAD_GPIO_7__EPIT1_EPITO 0x334 0x6c4 0x000 0x2 0x0
-#define MX53_PAD_GPIO_7__CAN1_TXCAN 0x334 0x6c4 0x000 0x3 0x0
-#define MX53_PAD_GPIO_7__UART2_TXD_MUX 0x334 0x6c4 0x000 0x4 0x0
-#define MX53_PAD_GPIO_7__FIRI_RXD 0x334 0x6c4 0x80c 0x5 0x1
-#define MX53_PAD_GPIO_7__SPDIF_PLOCK 0x334 0x6c4 0x000 0x6 0x0
-#define MX53_PAD_GPIO_7__CCM_PLL2_BYP 0x334 0x6c4 0x774 0x7 0x1
-#define MX53_PAD_GPIO_8__ESAI1_TX5_RX0 0x338 0x6c8 0x7f8 0x0 0x1
-#define MX53_PAD_GPIO_8__GPIO1_8 0x338 0x6c8 0x000 0x1 0x0
-#define MX53_PAD_GPIO_8__EPIT2_EPITO 0x338 0x6c8 0x000 0x2 0x0
-#define MX53_PAD_GPIO_8__CAN1_RXCAN 0x338 0x6c8 0x760 0x3 0x2
-#define MX53_PAD_GPIO_8__UART2_RXD_MUX 0x338 0x6c8 0x880 0x4 0x5
-#define MX53_PAD_GPIO_8__FIRI_TXD 0x338 0x6c8 0x000 0x5 0x0
-#define MX53_PAD_GPIO_8__SPDIF_SRCLK 0x338 0x6c8 0x000 0x6 0x0
-#define MX53_PAD_GPIO_8__CCM_PLL3_BYP 0x338 0x6c8 0x778 0x7 0x1
-#define MX53_PAD_GPIO_16__ESAI1_TX3_RX2 0x33c 0x6cc 0x7f0 0x0 0x1
-#define MX53_PAD_GPIO_16__GPIO7_11 0x33c 0x6cc 0x000 0x1 0x0
-#define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT 0x33c 0x6cc 0x000 0x2 0x0
-#define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 0x33c 0x6cc 0x000 0x4 0x0
-#define MX53_PAD_GPIO_16__SPDIF_IN1 0x33c 0x6cc 0x870 0x5 0x1
-#define MX53_PAD_GPIO_16__I2C3_SDA 0x33c 0x6cc 0x828 0x6 0x2
-#define MX53_PAD_GPIO_16__SJC_DE_B 0x33c 0x6cc 0x000 0x7 0x0
-#define MX53_PAD_GPIO_17__ESAI1_TX0 0x340 0x6d0 0x7e4 0x0 0x1
-#define MX53_PAD_GPIO_17__GPIO7_12 0x340 0x6d0 0x000 0x1 0x0
-#define MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0 0x340 0x6d0 0x868 0x2 0x1
-#define MX53_PAD_GPIO_17__GPC_PMIC_RDY 0x340 0x6d0 0x810 0x3 0x1
-#define MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG 0x340 0x6d0 0x000 0x4 0x0
-#define MX53_PAD_GPIO_17__SPDIF_OUT1 0x340 0x6d0 0x000 0x5 0x0
-#define MX53_PAD_GPIO_17__IPU_SNOOP2 0x340 0x6d0 0x000 0x6 0x0
-#define MX53_PAD_GPIO_17__SJC_JTAG_ACT 0x340 0x6d0 0x000 0x7 0x0
-#define MX53_PAD_GPIO_18__ESAI1_TX1 0x344 0x6d4 0x7e8 0x0 0x1
-#define MX53_PAD_GPIO_18__GPIO7_13 0x344 0x6d4 0x000 0x1 0x0
-#define MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1 0x344 0x6d4 0x86c 0x2 0x1
-#define MX53_PAD_GPIO_18__OWIRE_LINE 0x344 0x6d4 0x864 0x3 0x1
-#define MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG 0x344 0x6d4 0x000 0x4 0x0
-#define MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK 0x344 0x6d4 0x768 0x5 0x1
-#define MX53_PAD_GPIO_18__ESDHC1_LCTL 0x344 0x6d4 0x000 0x6 0x0
-#define MX53_PAD_GPIO_18__SRC_SYSTEM_RST 0x344 0x6d4 0x000 0x7 0x0
-
-#endif /* __DTS_IMX53_PINFUNC_H */
diff --git a/arch/arm/dts/imx53-qsb-common.dtsi b/arch/arm/dts/imx53-qsb-common.dtsi
index 9aa0f08..21419bb 100644
--- a/arch/arm/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/dts/imx53-qsb-common.dtsi
@@ -10,8 +10,6 @@
* http://www.gnu.org/copyleft/gpl.html
*/
-#include "imx53.dtsi"
-
/ {
chosen {
linux,stdout-path = "/soc/aips@50000000/serial@53fbc000";
@@ -21,101 +19,9 @@
device-path = &esdhc1, "partname:barebox-environment";
};
};
-
- display@di0 {
- compatible = "fsl,imx-parallel-display";
- crtcs = <&ipu 0>;
- interface-pix-fmt = "rgb565";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ipu_disp0_1>;
- status = "disabled";
- display-timings {
- claawvga {
- native-mode;
- clock-frequency = <27000000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <40>;
- hfront-porch = <60>;
- vback-porch = <10>;
- vfront-porch = <10>;
- hsync-len = <20>;
- vsync-len = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- power {
- label = "Power Button";
- gpios = <&gpio1 8 0>;
- linux,code = <116>; /* KEY_POWER */
- gpio-key,wakeup;
- };
-
- volume-up {
- label = "Volume Up";
- gpios = <&gpio2 14 0>;
- linux,code = <115>; /* KEY_VOLUMEUP */
- };
-
- volume-down {
- label = "Volume Down";
- gpios = <&gpio2 15 0>;
- linux,code = <114>; /* KEY_VOLUMEDOWN */
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pin_gpio7_7>;
-
- user {
- label = "Heartbeat";
- gpios = <&gpio7 7 0>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- regulators {
- compatible = "simple-bus";
-
- reg_3p2v: 3p2v {
- compatible = "regulator-fixed";
- regulator-name = "3P2V";
- regulator-min-microvolt = <3200000>;
- regulator-max-microvolt = <3200000>;
- regulator-always-on;
- };
- };
-
- sound {
- compatible = "fsl,imx53-qsb-sgtl5000",
- "fsl,imx-audio-sgtl5000";
- model = "imx53-qsb-sgtl5000";
- ssi-controller = <&ssi2>;
- audio-codec = <&sgtl5000>;
- audio-routing =
- "MIC_IN", "Mic Jack",
- "Mic Jack", "Mic Bias",
- "Headphone Jack", "HP_OUT";
- mux-int-port = <2>;
- mux-ext-port = <5>;
- };
};
&esdhc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1_1>;
- cd-gpios = <&gpio3 13 0>;
- status = "okay";
#address-cells = <1>;
#size-cells = <1>;
@@ -125,112 +31,6 @@
};
};
-&ssi2 {
- fsl,mode = "i2s-slave";
- status = "okay";
-};
-
-&esdhc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc3_1>;
- cd-gpios = <&gpio3 11 0>;
- wp-gpios = <&gpio3 12 0>;
- status = "okay";
-};
-
&iim {
barebox,provide-mac-address = <&fec 1 9>;
};
-
-&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- hog {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
- MX53_PAD_GPIO_8__GPIO1_8 0x80000000
- MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000
- MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000
- MX53_PAD_EIM_DA11__GPIO3_11 0x80000000
- MX53_PAD_EIM_DA12__GPIO3_12 0x80000000
- MX53_PAD_EIM_DA13__GPIO3_13 0x80000000
- MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
- MX53_PAD_GPIO_16__GPIO7_11 0x80000000
- MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000
- >;
- };
-
- led_pin_gpio7_7: led_gpio7_7@0 {
- fsl,pins = <
- MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
- >;
- };
- };
-
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_1>;
- status = "okay";
-};
-
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2_1>;
- status = "okay";
-
- sgtl5000: codec@0a {
- compatible = "fsl,sgtl5000";
- reg = <0x0a>;
- VDDA-supply = <®_3p2v>;
- VDDIO-supply = <®_3p2v>;
- clocks = <&clks 150>;
- };
-};
-
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1_1>;
- status = "okay";
-
- accelerometer: mma8450@1c {
- compatible = "fsl,mma8450";
- reg = <0x1c>;
- };
-};
-
-&audmux {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux_1>;
- status = "okay";
-};
-
-&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec_1>;
- phy-mode = "rmii";
- phy-reset-gpios = <&gpio7 6 0>;
- status = "okay";
-};
-
-&usbh1 {
- phy_type = "utmi";
- dr_mode = "host";
- status = "okay";
-};
-
-&usbotg {
- phy_type = "utmi";
- status = "okay";
-};
-
-&sata {
- status = "okay";
-};
-
-&sata {
- status = "okay";
-};
diff --git a/arch/arm/dts/imx53-qsb.dts b/arch/arm/dts/imx53-qsb.dts
index 3ceb3b8..0500f0b 100644
--- a/arch/arm/dts/imx53-qsb.dts
+++ b/arch/arm/dts/imx53-qsb.dts
@@ -10,107 +10,5 @@
* http://www.gnu.org/copyleft/gpl.html
*/
-/dts-v1/;
-
+#include <arm/imx53-qsb.dts>
#include "imx53-qsb-common.dtsi"
-
-/ {
- model = "Freescale i.MX53 Quick Start Board";
- compatible = "fsl,imx53-qsb", "fsl,imx53";
-};
-
-&i2c1 {
- pmic: dialog@48 {
- compatible = "dlg,da9053-aa", "dlg,da9052";
- reg = <0x48>;
- interrupt-parent = <&gpio7>;
- interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
-
- regulators {
- buck1_reg: buck1 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <2075000>;
- regulator-always-on;
- };
-
- buck2_reg: buck2 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <2075000>;
- regulator-always-on;
- };
-
- buck3_reg: buck3 {
- regulator-min-microvolt = <925000>;
- regulator-max-microvolt = <2500000>;
- regulator-always-on;
- };
-
- buck4_reg: buck4 {
- regulator-min-microvolt = <925000>;
- regulator-max-microvolt = <2500000>;
- regulator-always-on;
- };
-
- ldo1_reg: ldo1 {
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo2_reg: ldo2 {
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo3_reg: ldo3 {
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo4_reg: ldo4 {
- regulator-min-microvolt = <1725000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- ldo5_reg: ldo5 {
- regulator-min-microvolt = <1725000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- ldo6_reg: ldo6 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3600000>;
- regulator-always-on;
- };
-
- ldo7_reg: ldo7 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3600000>;
- regulator-always-on;
- };
-
- ldo8_reg: ldo8 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3600000>;
- regulator-always-on;
- };
-
- ldo9_reg: ldo9 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3600000>;
- regulator-always-on;
- };
-
- ldo10_reg: ldo10 {
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <3650000>;
- regulator-always-on;
- };
- };
- };
-};
diff --git a/arch/arm/dts/imx53-qsrb.dts b/arch/arm/dts/imx53-qsrb.dts
index aed9862..c47d351 100644
--- a/arch/arm/dts/imx53-qsrb.dts
+++ b/arch/arm/dts/imx53-qsrb.dts
@@ -10,148 +10,5 @@
* http://www.gnu.org/copyleft/gpl.html
*/
-/dts-v1/;
-
+#include <arm/imx53-qsrb.dts>
#include "imx53-qsb-common.dtsi"
-
-/ {
- model = "Freescale i.MX53 Quick Start-R Board";
- compatible = "fsl,imx53-qsb", "fsl,imx53";
-};
-
-&iomuxc {
- i2c1 {
- /* open drain */
- pinctrl_i2c1_qsrb: i2c1grp-1 {
- fsl,pins = <
- MX53_PAD_CSI0_DAT8__I2C1_SDA 0x400001ec
- MX53_PAD_CSI0_DAT9__I2C1_SCL 0x400001ec
- >;
- };
- };
-};
-
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1_qsrb>;
-
- pmic: ripley@8 {
- compatible = "fsl,mc34708";
- reg = <0x08>;
- interrupt-parent = <&gpio5>;
- interrupts = <23 0x8>;
- regulators {
- sw1_reg: sw1a {
- regulator-name = "SW1";
- regulator-min-microvolt = <650000>;
- regulator-max-microvolt = <1437500>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw1b_reg: sw1b {
- regulator-name = "SW1B";
- regulator-min-microvolt = <650000>;
- regulator-max-microvolt = <1437500>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw2_reg: sw2 {
- regulator-name = "SW2";
- regulator-min-microvolt = <650000>;
- regulator-max-microvolt = <1437500>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw3_reg: sw3 {
- regulator-name = "SW3";
- regulator-min-microvolt = <650000>;
- regulator-max-microvolt = <1425000>;
- regulator-boot-on;
- };
-
- sw4a_reg: sw4a {
- regulator-name = "SW4A";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw4b_reg: sw4b {
- regulator-name = "SW4B";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw5_reg: sw5 {
- regulator-name = "SW5";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1975000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- swbst_reg: swbst {
- regulator-name = "SWBST";
- regulator-boot-on;
- regulator-always-on;
- };
-
- vpll_reg: vpll {
- regulator-name = "VPLL";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- };
-
- vrefddr_reg: vrefddr {
- regulator-name = "VREFDDR";
- regulator-boot-on;
- regulator-always-on;
- };
-
- vusb_reg: vusb {
- regulator-name = "VUSB";
- regulator-boot-on;
- regulator-always-on;
- };
-
- vusb2_reg: vusb2 {
- regulator-name = "VUSB2";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <3000000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- vdac_reg: vdac {
- regulator-name = "VDAC";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2775000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- vgen1_reg: vgen1 {
- regulator-name = "VGEN1";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1550000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- vgen2_reg: vgen2 {
- regulator-name = "VGEN2";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
- };
- };
-};
diff --git a/arch/arm/dts/imx53-tqma53.dtsi b/arch/arm/dts/imx53-tqma53.dtsi
index b6c86cd..1deb0ce 100644
--- a/arch/arm/dts/imx53-tqma53.dtsi
+++ b/arch/arm/dts/imx53-tqma53.dtsi
@@ -11,11 +11,9 @@
*/
#include "imx53.dtsi"
+#include <arm/imx53-tqma53.dtsi>
/ {
- model = "TQ TQMa53";
- compatible = "tq,tqma53", "fsl,imx53";
-
chosen {
environment-emmc {
compatible = "barebox,environment";
@@ -23,174 +21,8 @@
status = "disabled";
};
};
-
- memory {
- reg = <0x70000000 0x0>; /* Up to 1GiB */
- };
-
- regulators {
- compatible = "simple-bus";
-
- reg_3p3v: 3p3v {
- compatible = "regulator-fixed";
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
- };
-};
-
-&esdhc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc2_1>,
- <&pinctrl_tqma53_esdhc2_2>;
- vmmc-supply = <®_3p3v>;
- wp-gpios = <&gpio1 2 0>;
- cd-gpios = <&gpio1 4 0>;
- status = "disabled";
-};
-
-&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3_2>;
- status = "disabled";
-};
-
-&ecspi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1_1>;
- fsl,spi-num-chipselects = <4>;
- cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>,
- <&gpio3 24 0>, <&gpio3 25 0>;
- status = "disabled";
-};
-
-&esdhc3 { /* EMMC */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc3_1>;
- vmmc-supply = <®_3p3v>;
- non-removable;
- bus-width = <8>;
- dsr = <0x100>;
- status = "okay";
};
&iim {
barebox,provide-mac-address = <&fec 1 9>;
};
-
-&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- esdhc2_2 {
- pinctrl_tqma53_esdhc2_2: esdhc2-tqma53-grp2 {
- fsl,pins = <
- MX53_PAD_GPIO_4__GPIO1_4 0x80000000 /* SD2_CD */
- MX53_PAD_GPIO_2__GPIO1_2 0x80000000 /* SD2_WP */
- >;
- };
- };
-
- i2s {
- pinctrl_i2s_1: i2s-grp1 {
- fsl,pins = <
- MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000 /* I2S_SCLK */
- MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000 /* I2S_DOUT */
- MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000 /* I2S_LRCLK */
- MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000 /* I2S_DIN */
- >;
- };
- };
-
- hog {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 /* SSI_MCLK */
- MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000 /* LCD_BLT_EN */
- MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000 /* LCD_RESET */
- MX53_PAD_PATA_DATA5__GPIO2_5 0x80000000 /* LCD_POWER */
- MX53_PAD_PATA_DATA6__GPIO2_6 0x80000000 /* PMIC_INT */
- MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000 /* CSI_RST */
- MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000 /* CSI_PWDN */
- MX53_PAD_GPIO_19__GPIO4_5 0x80000000 /* #SYSTEM_DOWN */
- MX53_PAD_GPIO_3__GPIO1_3 0x80000000
- MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 /* #PHY_RESET */
- MX53_PAD_GPIO_1__PWM2_PWMO 0x80000000 /* LCD_CONTRAST */
- >;
- };
- };
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_2>;
- fsl,uart-has-rtscts;
- status = "disabled";
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2_1>;
- status = "disabled";
-};
-
-&can1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can1_2>;
- status = "disabled";
-};
-
-&can2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can2_1>;
- status = "disabled";
-};
-
-&i2c3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3_1>;
- status = "disabled";
-};
-
-&cspi {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_cspi_1>;
- fsl,spi-num-chipselects = <3>;
- cs-gpios = <&gpio1 18 0>, <&gpio1 19 0>,
- <&gpio1 21 0>;
- status = "disabled";
-};
-
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2_1>;
- status = "okay";
-
- pmic: mc34708@8 {
- compatible = "fsl,mc34708";
- reg = <0x8>;
- fsl,mc13xxx-uses-rtc;
- interrupt-parent = <&gpio2>;
- interrupts = <6 4>; /* PATA_DATA6, active high */
- };
-
- sensor1: lm75@48 {
- compatible = "lm75";
- reg = <0x48>;
- };
-
- eeprom: 24c64@50 {
- compatible = "at,24c64";
- pagesize = <32>;
- reg = <0x50>;
- };
-};
-
-&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec_1>;
- phy-mode = "rmii";
- status = "disabled";
-};
diff --git a/arch/arm/dts/imx53-voipac-bsb.dts b/arch/arm/dts/imx53-voipac-bsb.dts
index 5c88c0e..6cf2d5c 100644
--- a/arch/arm/dts/imx53-voipac-bsb.dts
+++ b/arch/arm/dts/imx53-voipac-bsb.dts
@@ -9,127 +9,4 @@
* http://www.gnu.org/copyleft/gpl.html
*/
-/dts-v1/;
-#include "imx53-voipac-dmm-668.dtsi"
-
-/ {
- sound {
- compatible = "fsl,imx53-voipac-sgtl5000",
- "fsl,imx-audio-sgtl5000";
- model = "imx53-voipac-sgtl5000";
- ssi-controller = <&ssi2>;
- audio-codec = <&sgtl5000>;
- audio-routing =
- "Headphone Jack", "HP_OUT";
- mux-int-port = <2>;
- mux-ext-port = <5>;
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pin_gpio>;
-
- led1 {
- label = "led-red";
- gpios = <&gpio3 29 0>;
- default-state = "off";
- };
-
- led2 {
- label = "led-orange";
- gpios = <&gpio2 31 0>;
- default-state = "off";
- };
- };
-};
-
-&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- hog {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- /* SD2_CD */
- MX53_PAD_EIM_D25__GPIO3_25 0x80000000
- /* SD2_WP */
- MX53_PAD_EIM_A19__GPIO2_19 0x80000000
- >;
- };
-
- led_pin_gpio: led_gpio {
- fsl,pins = <
- MX53_PAD_EIM_D29__GPIO3_29 0x80000000
- MX53_PAD_EIM_EB3__GPIO2_31 0x80000000
- >;
- };
- };
-
- /* Keyboard controller */
- kpp {
- pinctrl_kpp_1: kppgrp-1 {
- fsl,pins = <
- MX53_PAD_GPIO_9__KPP_COL_6 0xe8
- MX53_PAD_GPIO_4__KPP_COL_7 0xe8
- MX53_PAD_KEY_COL2__KPP_COL_2 0xe8
- MX53_PAD_KEY_COL3__KPP_COL_3 0xe8
- MX53_PAD_KEY_COL4__KPP_COL_4 0xe8
-
- MX53_PAD_GPIO_2__KPP_ROW_6 0xe0
- MX53_PAD_GPIO_5__KPP_ROW_7 0xe0
- MX53_PAD_KEY_ROW2__KPP_ROW_2 0xe0
- MX53_PAD_KEY_ROW3__KPP_ROW_3 0xe0
- MX53_PAD_KEY_ROW4__KPP_ROW_4 0xe0
- >;
- };
- };
-};
-
-&audmux {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux_1>; /* SSI1 */
- status = "okay";
-};
-
-&esdhc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc2_1>;
- cd-gpios = <&gpio3 25 0>;
- wp-gpios = <&gpio2 19 0>;
- vmmc-supply = <®_3p3v>;
- status = "okay";
-};
-
-&i2c3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3_2>;
- status = "okay";
-
- sgtl5000: codec@0a {
- compatible = "fsl,sgtl5000";
- reg = <0x0a>;
- VDDA-supply = <®_3p3v>;
- VDDIO-supply = <®_3p3v>;
- clocks = <&clks 150>;
- };
-};
-
-&kpp {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_kpp_1>;
- linux,keymap = <
- 0x0203003b /* KEY_F1 */
- 0x0603003c /* KEY_F2 */
- 0x0207003d /* KEY_F3 */
- 0x0607003e /* KEY_F4 */
- >;
- keypad,num-rows = <8>;
- keypad,num-columns = <1>;
- status = "okay";
-};
-
-&ssi2 {
- fsl,mode = "i2s-slave";
- status = "okay";
-};
+#include <arm/imx53-voipac-bsb.dts>
diff --git a/arch/arm/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/dts/imx53-voipac-dmm-668.dtsi
deleted file mode 100644
index 9dc9490..0000000
--- a/arch/arm/dts/imx53-voipac-dmm-668.dtsi
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "imx53.dtsi"
-
-/ {
- model = "Voipac i.MX53 X53-DMM-668";
- compatible = "voipac,imx53-dmm-668", "fsl,imx53";
-
- memory@70000000 {
- device_type = "memory";
- reg = <0x70000000 0x20000000>;
- };
-
- memory@b0000000 {
- device_type = "memory";
- reg = <0xb0000000 0x20000000>;
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_3p3v: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
- };
-};
-
-&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- hog {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- /* Make DA9053 regulator functional */
- MX53_PAD_GPIO_16__GPIO7_11 0x80000000
- /* FEC Power enable */
- MX53_PAD_GPIO_11__GPIO4_1 0x80000000
- /* FEC RST */
- MX53_PAD_GPIO_12__GPIO4_2 0x80000000
- >;
- };
- };
-};
-
-&ecspi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1_1>;
- fsl,spi-num-chipselects = <4>;
- cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>, <&gpio2 16 0>, <&gpio2 17 0>;
- status = "okay";
-};
-
-&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec_1>;
- phy-mode = "rmii";
- phy-reset-gpios = <&gpio4 2 0>;
- status = "okay";
-};
-
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1_2>;
- status = "okay";
-
- pmic: dialog@48 {
- compatible = "dlg,da9053-aa", "dlg,da9052";
- reg = <0x48>;
- interrupt-parent = <&gpio7>;
- interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
-
- regulators {
- buck1_reg: buck1 {
- regulator-name = "BUCKCORE";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- };
-
- buck2_reg: buck2 {
- regulator-name = "BUCKPRO";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- };
-
- buck3_reg: buck3 {
- regulator-name = "BUCKMEM";
- regulator-min-microvolt = <1420000>;
- regulator-max-microvolt = <1580000>;
- regulator-always-on;
- };
-
- buck4_reg: buck4 {
- regulator-name = "BUCKPERI";
- regulator-min-microvolt = <2370000>;
- regulator-max-microvolt = <2630000>;
- regulator-always-on;
- };
-
- ldo1_reg: ldo1 {
- regulator-name = "ldo1_1v3";
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <1350000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo2_reg: ldo2 {
- regulator-name = "ldo2_1v3";
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- };
-
- ldo3_reg: ldo3 {
- regulator-name = "ldo3_3v3";
- regulator-min-microvolt = <3250000>;
- regulator-max-microvolt = <3350000>;
- regulator-always-on;
- };
-
- ldo4_reg: ldo4 {
- regulator-name = "ldo4_2v775";
- regulator-min-microvolt = <2770000>;
- regulator-max-microvolt = <2780000>;
- regulator-always-on;
- };
-
- ldo5_reg: ldo5 {
- regulator-name = "ldo5_3v3";
- regulator-min-microvolt = <3250000>;
- regulator-max-microvolt = <3350000>;
- regulator-always-on;
- };
-
- ldo6_reg: ldo6 {
- regulator-name = "ldo6_1v3";
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- };
-
- ldo7_reg: ldo7 {
- regulator-name = "ldo7_2v75";
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
-
- ldo8_reg: ldo8 {
- regulator-name = "ldo8_1v8";
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <1850000>;
- regulator-always-on;
- };
-
- ldo9_reg: ldo9 {
- regulator-name = "ldo9_1v5";
- regulator-min-microvolt = <1450000>;
- regulator-max-microvolt = <1550000>;
- regulator-always-on;
- };
-
- ldo10_reg: ldo10 {
- regulator-name = "ldo10_1v3";
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- };
- };
- };
-};
-
-&nfc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_nand_1>;
- nand-bus-width = <8>;
- nand-ecc-mode = "hw";
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_2>;
- status = "okay";
-};
diff --git a/arch/arm/dts/imx53.dtsi b/arch/arm/dts/imx53.dtsi
index d6cdcaf..9a766da 100644
--- a/arch/arm/dts/imx53.dtsi
+++ b/arch/arm/dts/imx53.dtsi
@@ -1,1116 +1 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "skeleton.dtsi"
-#include "imx53-pinfunc.h"
-
-/ {
- aliases {
- serial0 = &uart1;
- serial1 = &uart2;
- serial2 = &uart3;
- serial3 = &uart4;
- serial4 = &uart5;
- gpio0 = &gpio1;
- gpio1 = &gpio2;
- gpio2 = &gpio3;
- gpio3 = &gpio4;
- gpio4 = &gpio5;
- gpio5 = &gpio6;
- gpio6 = &gpio7;
- mmc0 = &esdhc1;
- mmc1 = &esdhc2;
- mmc2 = &esdhc3;
- mmc3 = &esdhc4;
- i2c0 = &i2c1;
- i2c1 = &i2c2;
- i2c2 = &i2c3;
- };
-
- tzic: tz-interrupt-controller@0fffc000 {
- compatible = "fsl,imx53-tzic", "fsl,tzic";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0x0fffc000 0x4000>;
- };
-
- clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ckil {
- compatible = "fsl,imx-ckil", "fixed-clock";
- clock-frequency = <32768>;
- };
-
- ckih1 {
- compatible = "fsl,imx-ckih1", "fixed-clock";
- clock-frequency = <22579200>;
- };
-
- ckih2 {
- compatible = "fsl,imx-ckih2", "fixed-clock";
- clock-frequency = <0>;
- };
-
- osc {
- compatible = "fsl,imx-osc", "fixed-clock";
- clock-frequency = <24000000>;
- };
- };
-
- soc {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- interrupt-parent = <&tzic>;
- ranges;
-
- sata: sata@10000000 {
- compatible = "fsl,imx53-ahci";
- reg = <0x10000000 0x1000>;
- interrupts = <28>;
- clocks = <&clks 173>, <&clks 188>, <&clks 5>;
- clock-names = "sata_gate", "sata_ref", "ahb";
- status = "disabled";
- };
-
- ipu: ipu@18000000 {
- #crtc-cells = <1>;
- compatible = "fsl,imx53-ipu";
- reg = <0x18000000 0x08000000>;
- interrupts = <11 10>;
- clocks = <&clks 59>, <&clks 110>, <&clks 61>;
- clock-names = "bus", "di0", "di1";
- resets = <&src 2>;
- };
-
- aips@50000000 { /* AIPS1 */
- compatible = "fsl,aips-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x50000000 0x10000000>;
- ranges;
-
- spba@50000000 {
- compatible = "fsl,spba-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x50000000 0x40000>;
- ranges;
-
- esdhc1: esdhc@50004000 {
- compatible = "fsl,imx53-esdhc";
- reg = <0x50004000 0x4000>;
- interrupts = <1>;
- clocks = <&clks 44>, <&clks 0>, <&clks 71>;
- clock-names = "ipg", "ahb", "per";
- bus-width = <4>;
- status = "disabled";
- };
-
- esdhc2: esdhc@50008000 {
- compatible = "fsl,imx53-esdhc";
- reg = <0x50008000 0x4000>;
- interrupts = <2>;
- clocks = <&clks 45>, <&clks 0>, <&clks 72>;
- clock-names = "ipg", "ahb", "per";
- bus-width = <4>;
- status = "disabled";
- };
-
- uart3: serial@5000c000 {
- compatible = "fsl,imx53-uart", "fsl,imx21-uart";
- reg = <0x5000c000 0x4000>;
- interrupts = <33>;
- clocks = <&clks 32>, <&clks 33>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- ecspi1: ecspi@50010000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
- reg = <0x50010000 0x4000>;
- interrupts = <36>;
- clocks = <&clks 51>, <&clks 52>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- ssi2: ssi@50014000 {
- compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
- reg = <0x50014000 0x4000>;
- interrupts = <30>;
- clocks = <&clks 49>;
- fsl,fifo-depth = <15>;
- fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
- status = "disabled";
- };
-
- esdhc3: esdhc@50020000 {
- compatible = "fsl,imx53-esdhc";
- reg = <0x50020000 0x4000>;
- interrupts = <3>;
- clocks = <&clks 46>, <&clks 0>, <&clks 73>;
- clock-names = "ipg", "ahb", "per";
- bus-width = <4>;
- status = "disabled";
- };
-
- esdhc4: esdhc@50024000 {
- compatible = "fsl,imx53-esdhc";
- reg = <0x50024000 0x4000>;
- interrupts = <4>;
- clocks = <&clks 47>, <&clks 0>, <&clks 74>;
- clock-names = "ipg", "ahb", "per";
- bus-width = <4>;
- status = "disabled";
- };
- };
-
- usbphy0: usbphy@0 {
- compatible = "usb-nop-xceiv";
- clocks = <&clks 124>;
- clock-names = "main_clk";
- status = "okay";
- };
-
- usbphy1: usbphy@1 {
- compatible = "usb-nop-xceiv";
- clocks = <&clks 125>;
- clock-names = "main_clk";
- status = "okay";
- };
-
- usbotg: usb@53f80000 {
- compatible = "fsl,imx53-usb", "fsl,imx27-usb";
- reg = <0x53f80000 0x0200>;
- interrupts = <18>;
- clocks = <&clks 108>;
- fsl,usbmisc = <&usbmisc 0>;
- fsl,usbphy = <&usbphy0>;
- status = "disabled";
- };
-
- usbh1: usb@53f80200 {
- compatible = "fsl,imx53-usb", "fsl,imx27-usb";
- reg = <0x53f80200 0x0200>;
- interrupts = <14>;
- clocks = <&clks 108>;
- fsl,usbmisc = <&usbmisc 1>;
- fsl,usbphy = <&usbphy1>;
- status = "disabled";
- };
-
- usbh2: usb@53f80400 {
- compatible = "fsl,imx53-usb", "fsl,imx27-usb";
- reg = <0x53f80400 0x0200>;
- interrupts = <16>;
- clocks = <&clks 108>;
- fsl,usbmisc = <&usbmisc 2>;
- status = "disabled";
- };
-
- usbh3: usb@53f80600 {
- compatible = "fsl,imx53-usb", "fsl,imx27-usb";
- reg = <0x53f80600 0x0200>;
- interrupts = <17>;
- clocks = <&clks 108>;
- fsl,usbmisc = <&usbmisc 3>;
- status = "disabled";
- };
-
- usbmisc: usbmisc@53f80800 {
- #index-cells = <1>;
- compatible = "fsl,imx53-usbmisc";
- reg = <0x53f80800 0x200>;
- clocks = <&clks 108>;
- };
-
- gpio1: gpio@53f84000 {
- compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
- reg = <0x53f84000 0x4000>;
- interrupts = <50 51>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio2: gpio@53f88000 {
- compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
- reg = <0x53f88000 0x4000>;
- interrupts = <52 53>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio3: gpio@53f8c000 {
- compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
- reg = <0x53f8c000 0x4000>;
- interrupts = <54 55>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio4: gpio@53f90000 {
- compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
- reg = <0x53f90000 0x4000>;
- interrupts = <56 57>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- kpp: kpp@53f94000 {
- compatible = "fsl,imx53-kpp", "fsl,imx21-kpp";
- reg = <0x53f94000 0x4000>;
- interrupts = <60>;
- clocks = <&clks 0>;
- status = "disabled";
- };
-
- wdog1: wdog@53f98000 {
- compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
- reg = <0x53f98000 0x4000>;
- interrupts = <58>;
- clocks = <&clks 0>;
- };
-
- wdog2: wdog@53f9c000 {
- compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
- reg = <0x53f9c000 0x4000>;
- interrupts = <59>;
- clocks = <&clks 0>;
- status = "disabled";
- };
-
- gpt: timer@53fa0000 {
- compatible = "fsl,imx53-gpt", "fsl,imx31-gpt";
- reg = <0x53fa0000 0x4000>;
- interrupts = <39>;
- clocks = <&clks 36>, <&clks 41>;
- clock-names = "ipg", "per";
- };
-
- iomuxc: iomuxc@53fa8000 {
- compatible = "fsl,imx53-iomuxc";
- reg = <0x53fa8000 0x4000>;
-
- audmux {
- pinctrl_audmux_1: audmuxgrp-1 {
- fsl,pins = <
- MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000
- MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000
- MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000
- MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000
- >;
- };
-
- pinctrl_audmux_2: audmuxgrp-2 {
- fsl,pins = <
- MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC 0x80000000
- MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD 0x80000000
- MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS 0x80000000
- MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD 0x80000000
- >;
- };
-
- pinctrl_audmux_3: audmuxgrp-3 {
- fsl,pins = <
- MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC 0x80000000
- MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD 0x80000000
- MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS 0x80000000
- MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD 0x80000000
- >;
- };
- };
-
- fec {
- pinctrl_fec_1: fecgrp-1 {
- fsl,pins = <
- MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
- MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
- MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
- MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
- MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
- MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
- MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
- MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
- MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
- MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
- >;
- };
-
- pinctrl_fec_2: fecgrp-2 {
- fsl,pins = <
- MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
- MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
- MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
- MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
- MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
- MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
- MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
- MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
- MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
- MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
- MX53_PAD_KEY_ROW1__FEC_COL 0x80000000
- MX53_PAD_KEY_COL3__FEC_CRS 0x80000000
- MX53_PAD_KEY_COL2__FEC_RDATA_2 0x80000000
- MX53_PAD_KEY_COL0__FEC_RDATA_3 0x80000000
- MX53_PAD_KEY_COL1__FEC_RX_CLK 0x80000000
- MX53_PAD_KEY_ROW2__FEC_TDATA_2 0x80000000
- MX53_PAD_GPIO_19__FEC_TDATA_3 0x80000000
- MX53_PAD_KEY_ROW0__FEC_TX_ER 0x80000000
- >;
- };
- };
-
- csi {
- pinctrl_csi_1: csigrp-1 {
- fsl,pins = <
- MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN 0x1d5
- MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC 0x1d5
- MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC 0x1d5
- MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1d5
- MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 0x1d5
- MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 0x1d5
- MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 0x1d5
- MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 0x1d5
- MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 0x1d5
- MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 0x1d5
- MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 0x1d5
- MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 0x1d5
- MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 0x1d5
- MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 0x1d5
- MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 0x1d5
- MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 0x1d5
- MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 0x1d5
- MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 0x1d5
- MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 0x1d5
- MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 0x1d5
- MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1d5
- >;
- };
-
- pinctrl_csi_2: csigrp-2 {
- fsl,pins = <
- MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC 0x1d5
- MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC 0x1d5
- MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1d5
- MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 0x1d5
- MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 0x1d5
- MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 0x1d5
- MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 0x1d5
- MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 0x1d5
- MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 0x1d5
- MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 0x1d5
- MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 0x1d5
- >;
- };
- };
-
- cspi {
- pinctrl_cspi_1: cspigrp-1 {
- fsl,pins = <
- MX53_PAD_SD1_DATA0__CSPI_MISO 0x1d5
- MX53_PAD_SD1_CMD__CSPI_MOSI 0x1d5
- MX53_PAD_SD1_CLK__CSPI_SCLK 0x1d5
- >;
- };
-
- pinctrl_cspi_2: cspigrp-2 {
- fsl,pins = <
- MX53_PAD_EIM_D22__CSPI_MISO 0x1d5
- MX53_PAD_EIM_D28__CSPI_MOSI 0x1d5
- MX53_PAD_EIM_D21__CSPI_SCLK 0x1d5
- >;
- };
- };
-
- ecspi1 {
- pinctrl_ecspi1_1: ecspi1grp-1 {
- fsl,pins = <
- MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000
- MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000
- MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000
- >;
- };
-
- pinctrl_ecspi1_2: ecspi1grp-2 {
- fsl,pins = <
- MX53_PAD_GPIO_19__ECSPI1_RDY 0x80000000
- MX53_PAD_EIM_EB2__ECSPI1_SS0 0x80000000
- MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000
- MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000
- MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000
- MX53_PAD_EIM_D19__ECSPI1_SS1 0x80000000
- >;
- };
- };
-
- ecspi2 {
- pinctrl_ecspi2_1: ecspi2grp-1 {
- fsl,pins = <
- MX53_PAD_EIM_OE__ECSPI2_MISO 0x80000000
- MX53_PAD_EIM_CS1__ECSPI2_MOSI 0x80000000
- MX53_PAD_EIM_CS0__ECSPI2_SCLK 0x80000000
- >;
- };
- };
-
- esdhc1 {
- pinctrl_esdhc1_1: esdhc1grp-1 {
- fsl,pins = <
- MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
- MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
- MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
- MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
- MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
- MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
- >;
- };
-
- pinctrl_esdhc1_2: esdhc1grp-2 {
- fsl,pins = <
- MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
- MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
- MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
- MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
- MX53_PAD_PATA_DATA8__ESDHC1_DAT4 0x1d5
- MX53_PAD_PATA_DATA9__ESDHC1_DAT5 0x1d5
- MX53_PAD_PATA_DATA10__ESDHC1_DAT6 0x1d5
- MX53_PAD_PATA_DATA11__ESDHC1_DAT7 0x1d5
- MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
- MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
- >;
- };
- };
-
- esdhc2 {
- pinctrl_esdhc2_1: esdhc2grp-1 {
- fsl,pins = <
- MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5
- MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5
- MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5
- MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5
- MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5
- MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5
- >;
- };
- };
-
- esdhc3 {
- pinctrl_esdhc3_1: esdhc3grp-1 {
- fsl,pins = <
- MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5
- MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5
- MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5
- MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5
- MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d5
- MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d5
- MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d5
- MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d5
- MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5
- MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5
- >;
- };
- };
-
- can1 {
- pinctrl_can1_1: can1grp-1 {
- fsl,pins = <
- MX53_PAD_PATA_INTRQ__CAN1_TXCAN 0x80000000
- MX53_PAD_PATA_DIOR__CAN1_RXCAN 0x80000000
- >;
- };
-
- pinctrl_can1_2: can1grp-2 {
- fsl,pins = <
- MX53_PAD_KEY_COL2__CAN1_TXCAN 0x80000000
- MX53_PAD_KEY_ROW2__CAN1_RXCAN 0x80000000
- >;
- };
-
- pinctrl_can1_3: can1grp-3 {
- fsl,pins = <
- MX53_PAD_GPIO_7__CAN1_TXCAN 0x80000000
- MX53_PAD_GPIO_8__CAN1_RXCAN 0x80000000
- >;
- };
- };
-
- can2 {
- pinctrl_can2_1: can2grp-1 {
- fsl,pins = <
- MX53_PAD_KEY_COL4__CAN2_TXCAN 0x80000000
- MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x80000000
- >;
- };
- };
-
- i2c1 {
- pinctrl_i2c1_1: i2c1grp-1 {
- fsl,pins = <
- MX53_PAD_CSI0_DAT8__I2C1_SDA 0xc0000000
- MX53_PAD_CSI0_DAT9__I2C1_SCL 0xc0000000
- >;
- };
-
- pinctrl_i2c1_2: i2c1grp-2 {
- fsl,pins = <
- MX53_PAD_EIM_D21__I2C1_SCL 0xc0000000
- MX53_PAD_EIM_D28__I2C1_SDA 0xc0000000
- >;
- };
- };
-
- i2c2 {
- pinctrl_i2c2_1: i2c2grp-1 {
- fsl,pins = <
- MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000
- MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000
- >;
- };
-
- pinctrl_i2c2_2: i2c2grp-2 {
- fsl,pins = <
- MX53_PAD_EIM_D16__I2C2_SDA 0xc0000000
- MX53_PAD_EIM_EB2__I2C2_SCL 0xc0000000
- >;
- };
- };
-
- i2c3 {
- pinctrl_i2c3_1: i2c3grp-1 {
- fsl,pins = <
- MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000
- MX53_PAD_GPIO_5__I2C3_SCL 0xc0000000
- >;
- };
-
- pinctrl_i2c3_2: i2c3grp-2 {
- fsl,pins = <
- MX53_PAD_GPIO_3__I2C3_SCL 0xc0000000
- MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000
- >;
- };
- };
-
- ipu_disp0 {
- pinctrl_ipu_disp0_1: ipudisp0grp-1 {
- fsl,pins = <
- MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x5
- MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 0x5
- MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 0x5
- MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 0x5
- MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 0x5
- MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 0x5
- MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 0x5
- MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 0x5
- MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 0x5
- MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 0x5
- MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 0x5
- MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 0x5
- MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 0x5
- MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 0x5
- MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 0x5
- MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 0x5
- MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 0x5
- MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 0x5
- MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 0x5
- MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 0x5
- MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 0x5
- MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 0x5
- MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 0x5
- MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 0x5
- MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 0x5
- MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 0x5
- MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 0x5
- MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x5
- >;
- };
- };
-
- ipu_disp1 {
- pinctrl_ipu_disp1_1: ipudisp1grp-1 {
- fsl,pins = <
- MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x5
- MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x5
- MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x5
- MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x5
- MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x5
- MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x5
- MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x5
- MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x5
- MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x5
- MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x5
- MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x5
- MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x5
- MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x5
- MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x5
- MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x5
- MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x5
- MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x5
- MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x5
- MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x5
- MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x5
- MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x5
- MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x5
- MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x5
- MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x5
- MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x5
- MX53_PAD_EIM_DA13__IPU_DI1_D0_CS 0x5
- MX53_PAD_EIM_DA14__IPU_DI1_D1_CS 0x5
- MX53_PAD_EIM_DA15__IPU_DI1_PIN1 0x5
- MX53_PAD_EIM_DA11__IPU_DI1_PIN2 0x5
- MX53_PAD_EIM_DA12__IPU_DI1_PIN3 0x5
- MX53_PAD_EIM_A25__IPU_DI1_PIN12 0x5
- MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x5
- >;
- };
- };
-
- ipu_disp2 {
- pinctrl_ipu_disp2_1: ipudisp2grp-1 {
- fsl,pins = <
- MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
- MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
- MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
- MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
- MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
- MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
- MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
- MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
- MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
- MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
- >;
- };
- };
-
- nand {
- pinctrl_nand_1: nandgrp-1 {
- fsl,pins = <
- MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4
- MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4
- MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4
- MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4
- MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0
- MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0
- MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4
- MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 0xa4
- MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 0xa4
- MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 0xa4
- MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 0xa4
- MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 0xa4
- MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 0xa4
- MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 0xa4
- MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 0xa4
- >;
- };
- };
-
- owire {
- pinctrl_owire_1: owiregrp-1 {
- fsl,pins = <
- MX53_PAD_GPIO_18__OWIRE_LINE 0x80000000
- >;
- };
- };
-
- pwm1 {
- pinctrl_pwm1_1: pwm1grp-1 {
- fsl,pins = <
- MX53_PAD_DISP0_DAT8__PWM1_PWMO 0x5
- >;
- };
- };
-
- pwm2 {
- pinctrl_pwm2_1: pwm2grp-1 {
- fsl,pins = <
- MX53_PAD_GPIO_1__PWM2_PWMO 0x80000000
- >;
- };
- };
-
- uart1 {
- pinctrl_uart1_1: uart1grp-1 {
- fsl,pins = <
- MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1c5
- MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1c5
- >;
- };
-
- pinctrl_uart1_2: uart1grp-2 {
- fsl,pins = <
- MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1c5
- MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1c5
- >;
- };
-
- pinctrl_uart1_3: uart1grp-3 {
- fsl,pins = <
- MX53_PAD_PATA_RESET_B__UART1_CTS 0x1c5
- MX53_PAD_PATA_IORDY__UART1_RTS 0x1c5
- >;
- };
- };
-
- uart2 {
- pinctrl_uart2_1: uart2grp-1 {
- fsl,pins = <
- MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5
- MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5
- >;
- };
-
- pinctrl_uart2_2: uart2grp-2 {
- fsl,pins = <
- MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5
- MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5
- MX53_PAD_PATA_DIOR__UART2_RTS 0x1c5
- MX53_PAD_PATA_INTRQ__UART2_CTS 0x1c5
- >;
- };
- };
-
- uart3 {
- pinctrl_uart3_1: uart3grp-1 {
- fsl,pins = <
- MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5
- MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5
- MX53_PAD_PATA_DA_1__UART3_CTS 0x1c5
- MX53_PAD_PATA_DA_2__UART3_RTS 0x1c5
- >;
- };
-
- pinctrl_uart3_2: uart3grp-2 {
- fsl,pins = <
- MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5
- MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5
- >;
- };
-
- };
-
- uart4 {
- pinctrl_uart4_1: uart4grp-1 {
- fsl,pins = <
- MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1c5
- MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1c5
- >;
- };
- };
-
- uart5 {
- pinctrl_uart5_1: uart5grp-1 {
- fsl,pins = <
- MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1c5
- MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1c5
- >;
- };
- };
- };
-
- gpr: iomuxc-gpr@53fa8000 {
- compatible = "fsl,imx53-iomuxc-gpr", "syscon";
- reg = <0x53fa8000 0xc>;
- };
-
- ldb: ldb@53fa8008 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx53-ldb";
- reg = <0x53fa8008 0x4>;
- gpr = <&gpr>;
- clocks = <&clks 122>, <&clks 120>,
- <&clks 115>, <&clks 116>,
- <&clks 123>, <&clks 85>;
- clock-names = "di0_pll", "di1_pll",
- "di0_sel", "di1_sel",
- "di0", "di1";
- status = "disabled";
-
- lvds-channel@0 {
- reg = <0>;
- crtcs = <&ipu 0>;
- status = "disabled";
- };
-
- lvds-channel@1 {
- reg = <1>;
- crtcs = <&ipu 1>;
- status = "disabled";
- };
- };
-
- pwm1: pwm@53fb4000 {
- #pwm-cells = <2>;
- compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
- reg = <0x53fb4000 0x4000>;
- clocks = <&clks 37>, <&clks 38>;
- clock-names = "ipg", "per";
- interrupts = <61>;
- };
-
- pwm2: pwm@53fb8000 {
- #pwm-cells = <2>;
- compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
- reg = <0x53fb8000 0x4000>;
- clocks = <&clks 39>, <&clks 40>;
- clock-names = "ipg", "per";
- interrupts = <94>;
- };
-
- uart1: serial@53fbc000 {
- compatible = "fsl,imx53-uart", "fsl,imx21-uart";
- reg = <0x53fbc000 0x4000>;
- interrupts = <31>;
- clocks = <&clks 28>, <&clks 29>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- uart2: serial@53fc0000 {
- compatible = "fsl,imx53-uart", "fsl,imx21-uart";
- reg = <0x53fc0000 0x4000>;
- interrupts = <32>;
- clocks = <&clks 30>, <&clks 31>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- can1: can@53fc8000 {
- compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
- reg = <0x53fc8000 0x4000>;
- interrupts = <82>;
- clocks = <&clks 158>, <&clks 157>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- can2: can@53fcc000 {
- compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
- reg = <0x53fcc000 0x4000>;
- interrupts = <83>;
- clocks = <&clks 87>, <&clks 86>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- src: src@53fd0000 {
- compatible = "fsl,imx53-src", "fsl,imx51-src";
- reg = <0x53fd0000 0x4000>;
- #reset-cells = <1>;
- };
-
- clks: ccm@53fd4000{
- compatible = "fsl,imx53-ccm";
- reg = <0x53fd4000 0x4000>;
- interrupts = <0 71 0x04 0 72 0x04>;
- #clock-cells = <1>;
- };
-
- gpio5: gpio@53fdc000 {
- compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
- reg = <0x53fdc000 0x4000>;
- interrupts = <103 104>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio6: gpio@53fe0000 {
- compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
- reg = <0x53fe0000 0x4000>;
- interrupts = <105 106>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio7: gpio@53fe4000 {
- compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
- reg = <0x53fe4000 0x4000>;
- interrupts = <107 108>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- i2c3: i2c@53fec000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
- reg = <0x53fec000 0x4000>;
- interrupts = <64>;
- clocks = <&clks 88>;
- status = "disabled";
- };
-
- uart4: serial@53ff0000 {
- compatible = "fsl,imx53-uart", "fsl,imx21-uart";
- reg = <0x53ff0000 0x4000>;
- interrupts = <13>;
- clocks = <&clks 65>, <&clks 66>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
- };
-
- aips@60000000 { /* AIPS2 */
- compatible = "fsl,aips-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x60000000 0x10000000>;
- ranges;
-
- iim: iim@63f98000 {
- compatible = "fsl,imx53-iim", "fsl,imx27-iim";
- reg = <0x63f98000 0x4000>;
- interrupts = <69>;
- clocks = <&clks 107>;
- };
-
- uart5: serial@63f90000 {
- compatible = "fsl,imx53-uart", "fsl,imx21-uart";
- reg = <0x63f90000 0x4000>;
- interrupts = <86>;
- clocks = <&clks 67>, <&clks 68>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- owire: owire@63fa4000 {
- compatible = "fsl,imx53-owire", "fsl,imx21-owire";
- reg = <0x63fa4000 0x4000>;
- clocks = <&clks 159>;
- status = "disabled";
- };
-
- ecspi2: ecspi@63fac000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
- reg = <0x63fac000 0x4000>;
- interrupts = <37>;
- clocks = <&clks 53>, <&clks 54>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- sdma: sdma@63fb0000 {
- compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
- reg = <0x63fb0000 0x4000>;
- interrupts = <6>;
- clocks = <&clks 56>, <&clks 56>;
- clock-names = "ipg", "ahb";
- fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
- };
-
- cspi: cspi@63fc0000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
- reg = <0x63fc0000 0x4000>;
- interrupts = <38>;
- clocks = <&clks 55>, <&clks 55>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- i2c2: i2c@63fc4000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
- reg = <0x63fc4000 0x4000>;
- interrupts = <63>;
- clocks = <&clks 35>;
- status = "disabled";
- };
-
- i2c1: i2c@63fc8000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
- reg = <0x63fc8000 0x4000>;
- interrupts = <62>;
- clocks = <&clks 34>;
- status = "disabled";
- };
-
- ssi1: ssi@63fcc000 {
- compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
- reg = <0x63fcc000 0x4000>;
- interrupts = <29>;
- clocks = <&clks 48>;
- fsl,fifo-depth = <15>;
- fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
- status = "disabled";
- };
-
- audmux: audmux@63fd0000 {
- compatible = "fsl,imx53-audmux", "fsl,imx31-audmux";
- reg = <0x63fd0000 0x4000>;
- status = "disabled";
- };
-
- nfc: nand@63fdb000 {
- compatible = "fsl,imx53-nand";
- reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
- interrupts = <8>;
- clocks = <&clks 60>;
- status = "disabled";
- };
-
- ssi3: ssi@63fe8000 {
- compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
- reg = <0x63fe8000 0x4000>;
- interrupts = <96>;
- clocks = <&clks 50>;
- fsl,fifo-depth = <15>;
- fsl,ssi-dma-events = <47 46 45 44>; /* TX0 RX0 TX1 RX1 */
- status = "disabled";
- };
-
- fec: ethernet@63fec000 {
- compatible = "fsl,imx53-fec", "fsl,imx25-fec";
- reg = <0x63fec000 0x4000>;
- interrupts = <87>;
- clocks = <&clks 42>, <&clks 42>, <&clks 42>;
- clock-names = "ipg", "ahb", "ptp";
- status = "disabled";
- };
-
- tve: tve@63ff0000 {
- compatible = "fsl,imx53-tve";
- reg = <0x63ff0000 0x1000>;
- interrupts = <92>;
- clocks = <&clks 69>, <&clks 116>;
- clock-names = "tve", "di_sel";
- crtcs = <&ipu 1>;
- status = "disabled";
- };
- };
- };
-};
+#include <arm/imx53.dtsi>
--
1.9.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 08/12] ARM: i.MX25: Use upstream dtsi file
2014-04-28 7:45 [PATCH] Add Linux dts files and use them Sascha Hauer
` (5 preceding siblings ...)
2014-04-28 7:45 ` [PATCH 07/12] ARM: i.MX53: " Sascha Hauer
@ 2014-04-28 7:45 ` Sascha Hauer
2014-04-28 7:45 ` [PATCH 09/12] ARM: i.MX27: " Sascha Hauer
` (4 subsequent siblings)
11 siblings, 0 replies; 23+ messages in thread
From: Sascha Hauer @ 2014-04-28 7:45 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/dts/imx25.dtsi | 535 +-----------------------------------------------
1 file changed, 4 insertions(+), 531 deletions(-)
diff --git a/arch/arm/dts/imx25.dtsi b/arch/arm/dts/imx25.dtsi
index 003c43c..2b93f77 100644
--- a/arch/arm/dts/imx25.dtsi
+++ b/arch/arm/dts/imx25.dtsi
@@ -14,545 +14,18 @@
/ {
aliases {
- gpio0 = &gpio1;
- gpio1 = &gpio2;
- gpio2 = &gpio3;
- gpio3 = &gpio4;
- i2c0 = &i2c1;
- i2c1 = &i2c2;
- i2c2 = &i2c3;
mmc0 = &esdhc1;
mmc2 = &esdhc2;
- serial0 = &uart1;
- serial1 = &uart2;
- serial2 = &uart3;
- serial3 = &uart4;
- serial4 = &uart5;
- spi0 = &spi1;
- spi1 = &spi2;
- spi2 = &spi3;
- usb0 = &usbotg;
- usb1 = &usbhost1;
- };
-
- cpus {
- #address-cells = <0>;
- #size-cells = <0>;
-
- cpu {
- compatible = "arm,arm926ej-s";
- device_type = "cpu";
- };
- };
-
- asic: asic-interrupt-controller@68000000 {
- compatible = "fsl,imx25-asic", "fsl,avic";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0x68000000 0x8000000>;
- };
-
- clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
- osc {
- compatible = "fsl,imx-osc", "fixed-clock";
- clock-frequency = <24000000>;
- };
};
soc {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- interrupt-parent = <&asic>;
- ranges;
-
- aips@43f00000 { /* AIPS1 */
- compatible = "fsl,aips-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x43f00000 0x100000>;
- ranges;
-
- i2c1: i2c@43f80000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
- reg = <0x43f80000 0x4000>;
- clocks = <&clks 48>;
- clock-names = "";
- interrupts = <3>;
- status = "disabled";
- };
-
- i2c3: i2c@43f84000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
- reg = <0x43f84000 0x4000>;
- clocks = <&clks 48>;
- clock-names = "";
- interrupts = <10>;
- status = "disabled";
- };
-
- can1: can@43f88000 {
- compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
- reg = <0x43f88000 0x4000>;
- interrupts = <43>;
- clocks = <&clks 75>, <&clks 75>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- can2: can@43f8c000 {
- compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
- reg = <0x43f8c000 0x4000>;
- interrupts = <44>;
- clocks = <&clks 76>, <&clks 76>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- uart1: serial@43f90000 {
- compatible = "fsl,imx25-uart", "fsl,imx21-uart";
- reg = <0x43f90000 0x4000>;
- interrupts = <45>;
- clocks = <&clks 120>, <&clks 57>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- uart2: serial@43f94000 {
- compatible = "fsl,imx25-uart", "fsl,imx21-uart";
- reg = <0x43f94000 0x4000>;
- interrupts = <32>;
- clocks = <&clks 121>, <&clks 57>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- i2c2: i2c@43f98000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
- reg = <0x43f98000 0x4000>;
- clocks = <&clks 48>;
- clock-names = "";
- interrupts = <4>;
- status = "disabled";
- };
-
- owire@43f9c000 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x43f9c000 0x4000>;
- clocks = <&clks 51>;
- clock-names = "";
- interrupts = <2>;
- status = "disabled";
- };
-
- spi1: cspi@43fa4000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
- reg = <0x43fa4000 0x4000>;
- clocks = <&clks 62>, <&clks 62>;
- clock-names = "ipg", "per";
- interrupts = <14>;
- status = "disabled";
- };
-
- kpp@43fa8000 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x43fa8000 0x4000>;
- clocks = <&clks 102>;
- clock-names = "";
- interrupts = <24>;
- status = "disabled";
- };
-
- iomuxc: iomuxc@43fac000 {
- compatible = "fsl,imx25-iomuxc";
- reg = <0x43fac000 0x4000>;
- };
-
- audmux: audmux@43fb0000 {
- compatible = "fsl,imx25-audmux", "fsl,imx31-audmux";
- reg = <0x43fb0000 0x4000>;
- status = "disabled";
- };
- };
-
- spba@50000000 {
- compatible = "fsl,spba-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x50000000 0x40000>;
- ranges;
-
- spi3: cspi@50004000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
- reg = <0x50004000 0x4000>;
- interrupts = <0>;
- clocks = <&clks 80>, <&clks 80>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- uart4: serial@50008000 {
- compatible = "fsl,imx25-uart", "fsl,imx21-uart";
- reg = <0x50008000 0x4000>;
- interrupts = <5>;
- clocks = <&clks 123>, <&clks 57>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- uart3: serial@5000c000 {
- compatible = "fsl,imx25-uart", "fsl,imx21-uart";
- reg = <0x5000c000 0x4000>;
- interrupts = <18>;
- clocks = <&clks 122>, <&clks 57>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- spi2: cspi@50010000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
- reg = <0x50010000 0x4000>;
- clocks = <&clks 79>, <&clks 79>;
- clock-names = "ipg", "per";
- interrupts = <13>;
- status = "disabled";
- };
-
- ssi2: ssi@50014000 {
- compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
- reg = <0x50014000 0x4000>;
- interrupts = <11>;
- clocks = <&clks 118>;
- clock-names = "ipg";
- dmas = <&sdma 24 1 0>,
- <&sdma 25 1 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- esai@50018000 {
- reg = <0x50018000 0x4000>;
- interrupts = <7>;
- };
-
- uart5: serial@5002c000 {
- compatible = "fsl,imx25-uart", "fsl,imx21-uart";
- reg = <0x5002c000 0x4000>;
- interrupts = <40>;
- clocks = <&clks 124>, <&clks 57>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- tsc: tsc@50030000 {
- compatible = "fsl,imx25-adc", "fsl,imx21-tsc";
- reg = <0x50030000 0x4000>;
- interrupts = <46>;
- clocks = <&clks 119>;
- clock-names = "ipg";
- status = "disabled";
- };
-
- ssi1: ssi@50034000 {
- compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
- reg = <0x50034000 0x4000>;
- interrupts = <12>;
- clocks = <&clks 117>;
- clock-names = "ipg";
- dmas = <&sdma 28 1 0>,
- <&sdma 29 1 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- fec: ethernet@50038000 {
- compatible = "fsl,imx25-fec";
- reg = <0x50038000 0x4000>;
- interrupts = <57>;
- clocks = <&clks 88>, <&clks 65>;
- clock-names = "ipg", "ahb";
- status = "disabled";
- };
- };
-
- aips@53f00000 { /* AIPS2 */
- compatible = "fsl,aips-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x53f00000 0x100000>;
- ranges;
-
- clks: ccm@53f80000 {
- compatible = "fsl,imx25-ccm";
- reg = <0x53f80000 0x4000>;
- interrupts = <31>;
- #clock-cells = <1>;
- };
-
- gpt4: timer@53f84000 {
- compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
- reg = <0x53f84000 0x4000>;
- clocks = <&clks 9>, <&clks 45>;
- clock-names = "ipg", "per";
- interrupts = <1>;
- };
-
- gpt3: timer@53f88000 {
- compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
- reg = <0x53f88000 0x4000>;
- clocks = <&clks 9>, <&clks 47>;
- clock-names = "ipg", "per";
- interrupts = <29>;
- };
-
- gpt2: timer@53f8c000 {
- compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
- reg = <0x53f8c000 0x4000>;
- clocks = <&clks 9>, <&clks 47>;
- clock-names = "ipg", "per";
- interrupts = <53>;
- };
-
- gpt1: timer@53f90000 {
- compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
- reg = <0x53f90000 0x4000>;
- clocks = <&clks 9>, <&clks 47>;
- clock-names = "ipg", "per";
- interrupts = <54>;
- };
-
- epit1: timer@53f94000 {
- compatible = "fsl,imx25-epit";
- reg = <0x53f94000 0x4000>;
- interrupts = <28>;
- };
-
- epit2: timer@53f98000 {
- compatible = "fsl,imx25-epit";
- reg = <0x53f98000 0x4000>;
- interrupts = <27>;
- };
-
- gpio4: gpio@53f9c000 {
- compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
- reg = <0x53f9c000 0x4000>;
- interrupts = <23>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- pwm2: pwm@53fa0000 {
- compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
- #pwm-cells = <2>;
- reg = <0x53fa0000 0x4000>;
- clocks = <&clks 106>, <&clks 36>;
- clock-names = "ipg", "per";
- interrupts = <36>;
- };
-
- gpio3: gpio@53fa4000 {
- compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
- reg = <0x53fa4000 0x4000>;
- interrupts = <16>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- pwm3: pwm@53fa8000 {
- compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
- #pwm-cells = <2>;
- reg = <0x53fa8000 0x4000>;
- clocks = <&clks 107>, <&clks 36>;
- clock-names = "ipg", "per";
- interrupts = <41>;
- };
-
- esdhc1: esdhc@53fb4000 {
- compatible = "fsl,imx25-esdhc";
- reg = <0x53fb4000 0x4000>;
- interrupts = <9>;
- clocks = <&clks 86>, <&clks 63>, <&clks 45>;
- clock-names = "ipg", "ahb", "per";
- status = "disabled";
- };
-
- esdhc2: esdhc@53fb8000 {
- compatible = "fsl,imx25-esdhc";
- reg = <0x53fb8000 0x4000>;
- interrupts = <8>;
- clocks = <&clks 87>, <&clks 64>, <&clks 46>;
- clock-names = "ipg", "ahb", "per";
- status = "disabled";
- };
-
- lcdc: lcdc@53fbc000 {
- compatible = "fsl,imx25-fb", "fsl,imx21-fb";
- reg = <0x53fbc000 0x4000>;
- interrupts = <39>;
- clocks = <&clks 103>, <&clks 66>, <&clks 49>;
- clock-names = "ipg", "ahb", "per";
- status = "disabled";
- };
-
- slcdc@53fc0000 {
- reg = <0x53fc0000 0x4000>;
- interrupts = <38>;
- status = "disabled";
- };
-
- pwm4: pwm@53fc8000 {
- compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
- reg = <0x53fc8000 0x4000>;
- clocks = <&clks 108>, <&clks 36>;
- clock-names = "ipg", "per";
- interrupts = <42>;
- };
-
- gpio1: gpio@53fcc000 {
- compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
- reg = <0x53fcc000 0x4000>;
- interrupts = <52>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio2: gpio@53fd0000 {
- compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
- reg = <0x53fd0000 0x4000>;
- interrupts = <51>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- sdma: sdma@53fd4000 {
- compatible = "fsl,imx25-sdma", "fsl,imx35-sdma";
- reg = <0x53fd4000 0x4000>;
- clocks = <&clks 112>, <&clks 68>;
- clock-names = "ipg", "ahb";
- #dma-cells = <3>;
- interrupts = <34>;
- fsl,sdma-ram-script-name = "imx/sdma/sdma-imx25.bin";
- };
-
- wdog@53fdc000 {
- compatible = "fsl,imx25-wdt", "fsl,imx21-wdt";
- reg = <0x53fdc000 0x4000>;
- clocks = <&clks 126>;
- clock-names = "";
- interrupts = <55>;
- };
-
- pwm1: pwm@53fe0000 {
- compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
- #pwm-cells = <2>;
- reg = <0x53fe0000 0x4000>;
- clocks = <&clks 105>, <&clks 36>;
- clock-names = "ipg", "per";
- interrupts = <26>;
- };
-
- iim: iim@53ff0000 {
- compatible = "fsl,imx25-iim", "fsl,imx27-iim";
- reg = <0x53ff0000 0x4000>;
- interrupts = <19>;
- clocks = <&clks 99>;
- };
-
- usbphy1: usbphy@1 {
- compatible = "nop-usbphy";
- status = "disabled";
- };
-
- usbphy2: usbphy@2 {
- compatible = "nop-usbphy";
- status = "disabled";
- };
-
- usbotg: usb@53ff4000 {
- compatible = "fsl,imx25-usb", "fsl,imx27-usb";
- reg = <0x53ff4000 0x0200>;
- interrupts = <37>;
- clocks = <&clks 9>, <&clks 70>, <&clks 8>;
- clock-names = "ipg", "ahb", "per";
- fsl,usbmisc = <&usbmisc 0>;
- status = "disabled";
- };
-
- usbhost1: usb@53ff4400 {
- compatible = "fsl,imx25-usb", "fsl,imx27-usb";
- reg = <0x53ff4400 0x0200>;
- interrupts = <35>;
- clocks = <&clks 9>, <&clks 70>, <&clks 8>;
- clock-names = "ipg", "ahb", "per";
- fsl,usbmisc = <&usbmisc 1>;
- status = "disabled";
- };
-
- usbmisc: usbmisc@53ff4600 {
- #index-cells = <1>;
- compatible = "fsl,imx25-usbmisc";
- clocks = <&clks 9>, <&clks 70>, <&clks 8>;
- clock-names = "ipg", "ahb", "per";
- reg = <0x53ff4600 0x00f>;
- };
-
- dryice@53ffc000 {
- compatible = "fsl,imx25-dryice", "fsl,imx25-rtc";
- reg = <0x53ffc000 0x4000>;
- clocks = <&clks 81>;
- clock-names = "ipg";
- interrupts = <25>;
- };
- };
-
iram: sram@78000000 {
compatible = "mmio-sram";
reg = <0x78000000 0x20000>;
};
-
- emi@80000000 {
- compatible = "fsl,emi-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x80000000 0x3b002000>;
- ranges;
-
- nfc: nand@bb000000 {
- #address-cells = <1>;
- #size-cells = <1>;
-
- compatible = "fsl,imx25-nand";
- reg = <0xbb000000 0x2000>;
- clocks = <&clks 50>;
- clock-names = "";
- interrupts = <33>;
- status = "disabled";
- };
- };
};
};
+
+&usbmisc {
+ status = "okay";
+};
--
1.9.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 09/12] ARM: i.MX27: Use upstream dtsi file
2014-04-28 7:45 [PATCH] Add Linux dts files and use them Sascha Hauer
` (6 preceding siblings ...)
2014-04-28 7:45 ` [PATCH 08/12] ARM: i.MX25: Use upstream dtsi file Sascha Hauer
@ 2014-04-28 7:45 ` Sascha Hauer
2014-04-28 7:45 ` [PATCH 10/12] ARM: AM33xx: " Sascha Hauer
` (3 subsequent siblings)
11 siblings, 0 replies; 23+ messages in thread
From: Sascha Hauer @ 2014-04-28 7:45 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/dts/imx27.dtsi | 553 +-----------------------------------------------
1 file changed, 1 insertion(+), 552 deletions(-)
diff --git a/arch/arm/dts/imx27.dtsi b/arch/arm/dts/imx27.dtsi
index 83a8247..49a0ddf 100644
--- a/arch/arm/dts/imx27.dtsi
+++ b/arch/arm/dts/imx27.dtsi
@@ -8,555 +8,4 @@
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
-
-#include "skeleton.dtsi"
-#include "imx27-pinfunc.h"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- aliases {
- ethernet0 = &fec;
- gpio0 = &gpio1;
- gpio1 = &gpio2;
- gpio2 = &gpio3;
- gpio3 = &gpio4;
- gpio4 = &gpio5;
- gpio5 = &gpio6;
- i2c0 = &i2c1;
- i2c1 = &i2c2;
- serial0 = &uart1;
- serial1 = &uart2;
- serial2 = &uart3;
- serial3 = &uart4;
- serial4 = &uart5;
- serial5 = &uart6;
- spi0 = &cspi1;
- spi1 = &cspi2;
- spi2 = &cspi3;
- };
-
- aitc: aitc-interrupt-controller@e0000000 {
- compatible = "fsl,imx27-aitc", "fsl,avic";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0x10040000 0x1000>;
- };
-
- clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
- osc26m {
- compatible = "fsl,imx-osc26m", "fixed-clock";
- clock-frequency = <26000000>;
- };
- };
-
- cpus {
- #size-cells = <0>;
- #address-cells = <1>;
-
- cpu: cpu@0 {
- device_type = "cpu";
- compatible = "arm,arm926ej-s";
- operating-points = <
- /* kHz uV */
- 266000 1300000
- 399000 1450000
- >;
- clock-latency = <62500>;
- clocks = <&clks 18>;
- voltage-tolerance = <5>;
- };
- };
-
- usbphy {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- usbphy0: usbphy@0 {
- compatible = "usb-nop-xceiv";
- reg = <0>;
- clocks = <&clks 75>;
- clock-names = "main_clk";
- };
-
- usbphy2: usbphy@2 {
- compatible = "usb-nop-xceiv";
- reg = <2>;
- clocks = <&clks 75>;
- clock-names = "main_clk";
- };
- };
-
- soc {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- interrupt-parent = <&aitc>;
- ranges;
-
- aipi@10000000 { /* AIPI1 */
- compatible = "fsl,aipi-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x10000000 0x20000>;
- ranges;
-
- dma: dma@10001000 {
- compatible = "fsl,imx27-dma";
- reg = <0x10001000 0x1000>;
- interrupts = <32>;
- clocks = <&clks 50>, <&clks 70>;
- clock-names = "ipg", "ahb";
- #dma-cells = <1>;
- #dma-channels = <16>;
- };
-
- wdog: wdog@10002000 {
- compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
- reg = <0x10002000 0x1000>;
- interrupts = <27>;
- clocks = <&clks 74>;
- };
-
- gpt1: timer@10003000 {
- compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
- reg = <0x10003000 0x1000>;
- interrupts = <26>;
- clocks = <&clks 46>, <&clks 61>;
- clock-names = "ipg", "per";
- };
-
- gpt2: timer@10004000 {
- compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
- reg = <0x10004000 0x1000>;
- interrupts = <25>;
- clocks = <&clks 45>, <&clks 61>;
- clock-names = "ipg", "per";
- };
-
- gpt3: timer@10005000 {
- compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
- reg = <0x10005000 0x1000>;
- interrupts = <24>;
- clocks = <&clks 44>, <&clks 61>;
- clock-names = "ipg", "per";
- };
-
- pwm: pwm@10006000 {
- #pwm-cells = <2>;
- compatible = "fsl,imx27-pwm";
- reg = <0x10006000 0x1000>;
- interrupts = <23>;
- clocks = <&clks 34>, <&clks 61>;
- clock-names = "ipg", "per";
- };
-
- kpp: kpp@10008000 {
- compatible = "fsl,imx27-kpp", "fsl,imx21-kpp";
- reg = <0x10008000 0x1000>;
- interrupts = <21>;
- clocks = <&clks 37>;
- status = "disabled";
- };
-
- owire: owire@10009000 {
- compatible = "fsl,imx27-owire", "fsl,imx21-owire";
- reg = <0x10009000 0x1000>;
- clocks = <&clks 35>;
- status = "disabled";
- };
-
- uart1: serial@1000a000 {
- compatible = "fsl,imx27-uart", "fsl,imx21-uart";
- reg = <0x1000a000 0x1000>;
- interrupts = <20>;
- clocks = <&clks 81>, <&clks 61>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- uart2: serial@1000b000 {
- compatible = "fsl,imx27-uart", "fsl,imx21-uart";
- reg = <0x1000b000 0x1000>;
- interrupts = <19>;
- clocks = <&clks 80>, <&clks 61>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- uart3: serial@1000c000 {
- compatible = "fsl,imx27-uart", "fsl,imx21-uart";
- reg = <0x1000c000 0x1000>;
- interrupts = <18>;
- clocks = <&clks 79>, <&clks 61>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- uart4: serial@1000d000 {
- compatible = "fsl,imx27-uart", "fsl,imx21-uart";
- reg = <0x1000d000 0x1000>;
- interrupts = <17>;
- clocks = <&clks 78>, <&clks 61>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- cspi1: cspi@1000e000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx27-cspi";
- reg = <0x1000e000 0x1000>;
- interrupts = <16>;
- clocks = <&clks 53>, <&clks 60>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- cspi2: cspi@1000f000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx27-cspi";
- reg = <0x1000f000 0x1000>;
- interrupts = <15>;
- clocks = <&clks 52>, <&clks 60>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- ssi1: ssi@10010000 {
- #sound-dai-cells = <0>;
- compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
- reg = <0x10010000 0x1000>;
- interrupts = <14>;
- clocks = <&clks 26>;
- dmas = <&dma 12>, <&dma 13>, <&dma 14>, <&dma 15>;
- dma-names = "rx0", "tx0", "rx1", "tx1";
- fsl,fifo-depth = <8>;
- status = "disabled";
- };
-
- ssi2: ssi@10011000 {
- #sound-dai-cells = <0>;
- compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
- reg = <0x10011000 0x1000>;
- interrupts = <13>;
- clocks = <&clks 25>;
- dmas = <&dma 8>, <&dma 9>, <&dma 10>, <&dma 11>;
- dma-names = "rx0", "tx0", "rx1", "tx1";
- fsl,fifo-depth = <8>;
- status = "disabled";
- };
-
- i2c1: i2c@10012000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
- reg = <0x10012000 0x1000>;
- interrupts = <12>;
- clocks = <&clks 40>;
- status = "disabled";
- };
-
- sdhci1: sdhci@10013000 {
- compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
- reg = <0x10013000 0x1000>;
- interrupts = <11>;
- clocks = <&clks 30>, <&clks 60>;
- clock-names = "ipg", "per";
- dmas = <&dma 7>;
- dma-names = "rx-tx";
- status = "disabled";
- };
-
- sdhci2: sdhci@10014000 {
- compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
- reg = <0x10014000 0x1000>;
- interrupts = <10>;
- clocks = <&clks 29>, <&clks 60>;
- clock-names = "ipg", "per";
- dmas = <&dma 6>;
- dma-names = "rx-tx";
- status = "disabled";
- };
-
- iomuxc: iomuxc@10015000 {
- compatible = "fsl,imx27-iomuxc";
- reg = <0x10015000 0x600>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- gpio1: gpio@10015000 {
- compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
- reg = <0x10015000 0x100>;
- interrupts = <8>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio2: gpio@10015100 {
- compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
- reg = <0x10015100 0x100>;
- interrupts = <8>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio3: gpio@10015200 {
- compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
- reg = <0x10015200 0x100>;
- interrupts = <8>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio4: gpio@10015300 {
- compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
- reg = <0x10015300 0x100>;
- interrupts = <8>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio5: gpio@10015400 {
- compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
- reg = <0x10015400 0x100>;
- interrupts = <8>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio6: gpio@10015500 {
- compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
- reg = <0x10015500 0x100>;
- interrupts = <8>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
- };
-
- audmux: audmux@10016000 {
- compatible = "fsl,imx27-audmux", "fsl,imx21-audmux";
- reg = <0x10016000 0x1000>;
- clocks = <&clks 0>;
- clock-names = "audmux";
- status = "disabled";
- };
-
- cspi3: cspi@10017000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx27-cspi";
- reg = <0x10017000 0x1000>;
- interrupts = <6>;
- clocks = <&clks 51>, <&clks 60>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- gpt4: timer@10019000 {
- compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
- reg = <0x10019000 0x1000>;
- interrupts = <4>;
- clocks = <&clks 43>, <&clks 61>;
- clock-names = "ipg", "per";
- };
-
- gpt5: timer@1001a000 {
- compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
- reg = <0x1001a000 0x1000>;
- interrupts = <3>;
- clocks = <&clks 42>, <&clks 61>;
- clock-names = "ipg", "per";
- };
-
- uart5: serial@1001b000 {
- compatible = "fsl,imx27-uart", "fsl,imx21-uart";
- reg = <0x1001b000 0x1000>;
- interrupts = <49>;
- clocks = <&clks 77>, <&clks 61>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- uart6: serial@1001c000 {
- compatible = "fsl,imx27-uart", "fsl,imx21-uart";
- reg = <0x1001c000 0x1000>;
- interrupts = <48>;
- clocks = <&clks 78>, <&clks 61>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- i2c2: i2c@1001d000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
- reg = <0x1001d000 0x1000>;
- interrupts = <1>;
- clocks = <&clks 39>;
- status = "disabled";
- };
-
- sdhci3: sdhci@1001e000 {
- compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
- reg = <0x1001e000 0x1000>;
- interrupts = <9>;
- clocks = <&clks 28>, <&clks 60>;
- clock-names = "ipg", "per";
- dmas = <&dma 36>;
- dma-names = "rx-tx";
- status = "disabled";
- };
-
- gpt6: timer@1001f000 {
- compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
- reg = <0x1001f000 0x1000>;
- interrupts = <2>;
- clocks = <&clks 41>, <&clks 61>;
- clock-names = "ipg", "per";
- };
- };
-
- aipi@10020000 { /* AIPI2 */
- compatible = "fsl,aipi-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x10020000 0x20000>;
- ranges;
-
- fb: fb@10021000 {
- compatible = "fsl,imx27-fb", "fsl,imx21-fb";
- interrupts = <61>;
- reg = <0x10021000 0x1000>;
- clocks = <&clks 36>, <&clks 65>, <&clks 59>;
- clock-names = "ipg", "ahb", "per";
- status = "disabled";
- };
-
- coda: coda@10023000 {
- compatible = "fsl,imx27-vpu";
- reg = <0x10023000 0x0200>;
- interrupts = <53>;
- clocks = <&clks 57>, <&clks 66>;
- clock-names = "per", "ahb";
- iram = <&iram>;
- };
-
- usbotg: usb@10024000 {
- compatible = "fsl,imx27-usb";
- reg = <0x10024000 0x200>;
- interrupts = <56>;
- clocks = <&clks 15>;
- fsl,usbmisc = <&usbmisc 0>;
- fsl,usbphy = <&usbphy0>;
- status = "disabled";
- };
-
- usbh1: usb@10024200 {
- compatible = "fsl,imx27-usb";
- reg = <0x10024200 0x200>;
- interrupts = <54>;
- clocks = <&clks 15>;
- fsl,usbmisc = <&usbmisc 1>;
- status = "disabled";
- };
-
- usbh2: usb@10024400 {
- compatible = "fsl,imx27-usb";
- reg = <0x10024400 0x200>;
- interrupts = <55>;
- clocks = <&clks 15>;
- fsl,usbmisc = <&usbmisc 2>;
- fsl,usbphy = <&usbphy2>;
- status = "disabled";
- };
-
- usbmisc: usbmisc@10024600 {
- #index-cells = <1>;
- compatible = "fsl,imx27-usbmisc";
- reg = <0x10024600 0x200>;
- clocks = <&clks 62>;
- };
-
- sahara2: sahara@10025000 {
- compatible = "fsl,imx27-sahara";
- reg = <0x10025000 0x1000>;
- interrupts = <59>;
- clocks = <&clks 32>, <&clks 64>;
- clock-names = "ipg", "ahb";
- };
-
- clks: ccm@10027000{
- compatible = "fsl,imx27-ccm";
- reg = <0x10027000 0x1000>;
- #clock-cells = <1>;
- };
-
- iim: iim@10028000 {
- compatible = "fsl,imx27-iim";
- reg = <0x10028000 0x1000>;
- interrupts = <62>;
- clocks = <&clks 38>;
- };
-
- fec: ethernet@1002b000 {
- compatible = "fsl,imx27-fec";
- reg = <0x1002b000 0x4000>;
- interrupts = <50>;
- clocks = <&clks 48>, <&clks 67>;
- clock-names = "ipg", "ahb";
- status = "disabled";
- };
- };
-
- nfc: nand@d8000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,imx27-nand";
- reg = <0xd8000000 0x1000>;
- interrupts = <29>;
- clocks = <&clks 54>;
- status = "disabled";
- };
-
- weim: weim@d8002000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,imx27-weim";
- reg = <0xd8002000 0x1000>;
- clocks = <&clks 0>;
- ranges = <
- 0 0 0xc0000000 0x08000000
- 1 0 0xc8000000 0x08000000
- 2 0 0xd0000000 0x02000000
- 3 0 0xd2000000 0x02000000
- 4 0 0xd4000000 0x02000000
- 5 0 0xd6000000 0x02000000
- >;
- status = "disabled";
- };
-
- iram: iram@ffff4c00 {
- compatible = "mmio-sram";
- reg = <0xffff4c00 0xb400>;
- };
- };
-};
+#include <arm/imx27.dtsi>
--
1.9.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 10/12] ARM: AM33xx: Use upstream dtsi file
2014-04-28 7:45 [PATCH] Add Linux dts files and use them Sascha Hauer
` (7 preceding siblings ...)
2014-04-28 7:45 ` [PATCH 09/12] ARM: i.MX27: " Sascha Hauer
@ 2014-04-28 7:45 ` Sascha Hauer
2014-04-28 7:46 ` [PATCH 11/12] ARM: Tegra20: Use upstream dtsi files Sascha Hauer
` (2 subsequent siblings)
11 siblings, 0 replies; 23+ messages in thread
From: Sascha Hauer @ 2014-04-28 7:45 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/dts/am33xx.dtsi | 789 +----------------------------------------------
1 file changed, 1 insertion(+), 788 deletions(-)
diff --git a/arch/arm/dts/am33xx.dtsi b/arch/arm/dts/am33xx.dtsi
index 08d6d87..7ba0a0b 100644
--- a/arch/arm/dts/am33xx.dtsi
+++ b/arch/arm/dts/am33xx.dtsi
@@ -7,803 +7,16 @@
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/am33xx.h>
-
-#include "skeleton.dtsi"
+#include <arm/am33xx.dtsi>
/ {
- compatible = "ti,am33xx";
- interrupt-parent = <&intc>;
-
aliases {
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
gpio3 = &gpio3;
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
mmc0 = &mmc1;
mmc1 = &mmc2;
mmc2 = &mmc3;
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &uart2;
- serial3 = &uart3;
- serial4 = &uart4;
- serial5 = &uart5;
- d_can0 = &dcan0;
- d_can1 = &dcan1;
- usb0 = &usb0;
- usb1 = &usb1;
- phy0 = &usb0_phy;
- phy1 = &usb1_phy;
- ethernet0 = &cpsw_emac0;
- ethernet1 = &cpsw_emac1;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
- cpu@0 {
- compatible = "arm,cortex-a8";
- device_type = "cpu";
- reg = <0>;
-
- /*
- * To consider voltage drop between PMIC and SoC,
- * tolerance value is reduced to 2% from 4% and
- * voltage value is increased as a precaution.
- */
- operating-points = <
- /* kHz uV */
- 720000 1285000
- 600000 1225000
- 500000 1125000
- 275000 1125000
- >;
- voltage-tolerance = <2>; /* 2 percentage */
- clock-latency = <300000>; /* From omap-cpufreq driver */
- };
- };
-
- pmu {
- compatible = "arm,cortex-a8-pmu";
- interrupts = <3>;
- };
-
- /*
- * The soc node represents the soc top level view. It is uses for IPs
- * that are not memory mapped in the MPU view or for the MPU itself.
- */
- soc {
- compatible = "ti,omap-infra";
- mpu {
- compatible = "ti,omap3-mpu";
- ti,hwmods = "mpu";
- };
- };
-
- am33xx_pinmux: pinmux@44e10800 {
- compatible = "pinctrl-single";
- reg = <0x44e10800 0x0238>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0x7f>;
- };
-
- /*
- * XXX: Use a flat representation of the AM33XX interconnect.
- * The real AM33XX interconnect network is quite complex.Since
- * that will not bring real advantage to represent that in DT
- * for the moment, just use a fake OCP bus entry to represent
- * the whole bus hierarchy.
- */
- ocp {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- ti,hwmods = "l3_main";
-
- intc: interrupt-controller@48200000 {
- compatible = "ti,omap2-intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- ti,intc-size = <128>;
- reg = <0x48200000 0x1000>;
- };
-
- edma: edma@49000000 {
- compatible = "ti,edma3";
- ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
- reg = <0x49000000 0x10000>,
- <0x44e10f90 0x10>;
- interrupts = <12 13 14>;
- #dma-cells = <1>;
- dma-channels = <64>;
- ti,edma-regions = <4>;
- ti,edma-slots = <256>;
- };
-
- gpio0: gpio@44e07000 {
- compatible = "ti,omap4-gpio";
- ti,hwmods = "gpio1";
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x44e07000 0x1000>;
- interrupts = <96>;
- };
-
- gpio1: gpio@4804c000 {
- compatible = "ti,omap4-gpio";
- ti,hwmods = "gpio2";
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x4804c000 0x1000>;
- interrupts = <98>;
- };
-
- gpio2: gpio@481ac000 {
- compatible = "ti,omap4-gpio";
- ti,hwmods = "gpio3";
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x481ac000 0x1000>;
- interrupts = <32>;
- };
-
- gpio3: gpio@481ae000 {
- compatible = "ti,omap4-gpio";
- ti,hwmods = "gpio4";
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x481ae000 0x1000>;
- interrupts = <62>;
- };
-
- uart0: serial@44e09000 {
- compatible = "ti,omap3-uart";
- ti,hwmods = "uart1";
- clock-frequency = <48000000>;
- reg = <0x44e09000 0x2000>;
- reg-shift = <2>;
- interrupts = <72>;
- status = "disabled";
- };
-
- uart1: serial@48022000 {
- compatible = "ti,omap3-uart";
- ti,hwmods = "uart2";
- clock-frequency = <48000000>;
- reg = <0x48022000 0x2000>;
- reg-shift = <2>;
- interrupts = <73>;
- status = "disabled";
- };
-
- uart2: serial@48024000 {
- compatible = "ti,omap3-uart";
- ti,hwmods = "uart3";
- clock-frequency = <48000000>;
- reg = <0x48024000 0x2000>;
- reg-shift = <2>;
- interrupts = <74>;
- status = "disabled";
- };
-
- uart3: serial@481a6000 {
- compatible = "ti,omap3-uart";
- ti,hwmods = "uart4";
- clock-frequency = <48000000>;
- reg = <0x481a6000 0x2000>;
- reg-shift = <2>;
- interrupts = <44>;
- status = "disabled";
- };
-
- uart4: serial@481a8000 {
- compatible = "ti,omap3-uart";
- ti,hwmods = "uart5";
- clock-frequency = <48000000>;
- reg = <0x481a8000 0x2000>;
- reg-shift = <2>;
- interrupts = <45>;
- status = "disabled";
- };
-
- uart5: serial@481aa000 {
- compatible = "ti,omap3-uart";
- ti,hwmods = "uart6";
- clock-frequency = <48000000>;
- reg = <0x481aa000 0x2000>;
- reg-shift = <2>;
- interrupts = <46>;
- status = "disabled";
- };
-
- i2c0: i2c@44e0b000 {
- compatible = "ti,omap4-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- ti,hwmods = "i2c1";
- reg = <0x44e0b000 0x1000>;
- interrupts = <70>;
- status = "disabled";
- };
-
- i2c1: i2c@4802a000 {
- compatible = "ti,omap4-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- ti,hwmods = "i2c2";
- reg = <0x4802a000 0x1000>;
- interrupts = <71>;
- status = "disabled";
- };
-
- i2c2: i2c@4819c000 {
- compatible = "ti,omap4-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- ti,hwmods = "i2c3";
- reg = <0x4819c000 0x1000>;
- interrupts = <30>;
- status = "disabled";
- };
-
- mmc1: mmc@48060000 {
- compatible = "ti,omap4-hsmmc";
- ti,hwmods = "mmc1";
- ti,dual-volt;
- ti,needs-special-reset;
- ti,needs-special-hs-handling;
- dmas = <&edma 24
- &edma 25>;
- dma-names = "tx", "rx";
- interrupts = <64>;
- interrupt-parent = <&intc>;
- reg = <0x48060000 0x1000>;
- status = "disabled";
- };
-
- mmc2: mmc@481d8000 {
- compatible = "ti,omap4-hsmmc";
- ti,hwmods = "mmc2";
- ti,needs-special-reset;
- dmas = <&edma 2
- &edma 3>;
- dma-names = "tx", "rx";
- interrupts = <28>;
- interrupt-parent = <&intc>;
- reg = <0x481d8000 0x1000>;
- status = "disabled";
- };
-
- mmc3: mmc@47810000 {
- compatible = "ti,omap4-hsmmc";
- ti,hwmods = "mmc3";
- ti,needs-special-reset;
- interrupts = <29>;
- interrupt-parent = <&intc>;
- reg = <0x47810000 0x1000>;
- status = "disabled";
- };
-
- hwspinlock: spinlock@480ca000 {
- compatible = "ti,omap4-hwspinlock";
- reg = <0x480ca000 0x1000>;
- ti,hwmods = "spinlock";
- };
-
- wdt2: wdt@44e35000 {
- compatible = "ti,omap3-wdt";
- ti,hwmods = "wd_timer2";
- reg = <0x44e35000 0x1000>;
- interrupts = <91>;
- };
-
- dcan0: d_can@481cc000 {
- compatible = "bosch,d_can";
- ti,hwmods = "d_can0";
- reg = <0x481cc000 0x2000
- 0x44e10644 0x4>;
- interrupts = <52>;
- status = "disabled";
- };
-
- dcan1: d_can@481d0000 {
- compatible = "bosch,d_can";
- ti,hwmods = "d_can1";
- reg = <0x481d0000 0x2000
- 0x44e10644 0x4>;
- interrupts = <55>;
- status = "disabled";
- };
-
- timer1: timer@44e31000 {
- compatible = "ti,am335x-timer-1ms";
- reg = <0x44e31000 0x400>;
- interrupts = <67>;
- ti,hwmods = "timer1";
- ti,timer-alwon;
- };
-
- timer2: timer@48040000 {
- compatible = "ti,am335x-timer";
- reg = <0x48040000 0x400>;
- interrupts = <68>;
- ti,hwmods = "timer2";
- };
-
- timer3: timer@48042000 {
- compatible = "ti,am335x-timer";
- reg = <0x48042000 0x400>;
- interrupts = <69>;
- ti,hwmods = "timer3";
- };
-
- timer4: timer@48044000 {
- compatible = "ti,am335x-timer";
- reg = <0x48044000 0x400>;
- interrupts = <92>;
- ti,hwmods = "timer4";
- ti,timer-pwm;
- };
-
- timer5: timer@48046000 {
- compatible = "ti,am335x-timer";
- reg = <0x48046000 0x400>;
- interrupts = <93>;
- ti,hwmods = "timer5";
- ti,timer-pwm;
- };
-
- timer6: timer@48048000 {
- compatible = "ti,am335x-timer";
- reg = <0x48048000 0x400>;
- interrupts = <94>;
- ti,hwmods = "timer6";
- ti,timer-pwm;
- };
-
- timer7: timer@4804a000 {
- compatible = "ti,am335x-timer";
- reg = <0x4804a000 0x400>;
- interrupts = <95>;
- ti,hwmods = "timer7";
- ti,timer-pwm;
- };
-
- rtc@44e3e000 {
- compatible = "ti,da830-rtc";
- reg = <0x44e3e000 0x1000>;
- interrupts = <75
- 76>;
- ti,hwmods = "rtc";
- };
-
- spi0: spi@48030000 {
- compatible = "ti,omap4-mcspi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x48030000 0x400>;
- interrupts = <65>;
- ti,spi-num-cs = <2>;
- ti,hwmods = "spi0";
- dmas = <&edma 16
- &edma 17
- &edma 18
- &edma 19>;
- dma-names = "tx0", "rx0", "tx1", "rx1";
- status = "disabled";
- };
-
- spi1: spi@481a0000 {
- compatible = "ti,omap4-mcspi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x481a0000 0x400>;
- interrupts = <125>;
- ti,spi-num-cs = <2>;
- ti,hwmods = "spi1";
- dmas = <&edma 42
- &edma 43
- &edma 44
- &edma 45>;
- dma-names = "tx0", "rx0", "tx1", "rx1";
- status = "disabled";
- };
-
- usb: usb@47400000 {
- compatible = "ti,am33xx-usb";
- reg = <0x47400000 0x1000>;
- ranges;
- #address-cells = <1>;
- #size-cells = <1>;
- ti,hwmods = "usb_otg_hs";
- status = "disabled";
-
- usb_ctrl_mod: control@44e10000 {
- compatible = "ti,am335x-usb-ctrl-module";
- reg = <0x44e10620 0x10
- 0x44e10648 0x4>;
- reg-names = "phy_ctrl", "wakeup";
- status = "disabled";
- };
-
- usb0_phy: usb-phy@47401300 {
- compatible = "ti,am335x-usb-phy";
- reg = <0x47401300 0x100>;
- reg-names = "phy";
- status = "disabled";
- ti,ctrl_mod = <&usb_ctrl_mod>;
- };
-
- usb0: usb@47401000 {
- compatible = "ti,musb-am33xx";
- status = "disabled";
- reg = <0x47401400 0x400
- 0x47401000 0x200>;
- reg-names = "mc", "control";
-
- interrupts = <18>;
- interrupt-names = "mc";
- dr_mode = "otg";
- mentor,multipoint = <1>;
- mentor,num-eps = <16>;
- mentor,ram-bits = <12>;
- mentor,power = <500>;
- phys = <&usb0_phy>;
-
- dmas = <&cppi41dma 0 0 &cppi41dma 1 0
- &cppi41dma 2 0 &cppi41dma 3 0
- &cppi41dma 4 0 &cppi41dma 5 0
- &cppi41dma 6 0 &cppi41dma 7 0
- &cppi41dma 8 0 &cppi41dma 9 0
- &cppi41dma 10 0 &cppi41dma 11 0
- &cppi41dma 12 0 &cppi41dma 13 0
- &cppi41dma 14 0 &cppi41dma 0 1
- &cppi41dma 1 1 &cppi41dma 2 1
- &cppi41dma 3 1 &cppi41dma 4 1
- &cppi41dma 5 1 &cppi41dma 6 1
- &cppi41dma 7 1 &cppi41dma 8 1
- &cppi41dma 9 1 &cppi41dma 10 1
- &cppi41dma 11 1 &cppi41dma 12 1
- &cppi41dma 13 1 &cppi41dma 14 1>;
- dma-names =
- "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
- "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
- "rx14", "rx15",
- "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
- "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
- "tx14", "tx15";
- };
-
- usb1_phy: usb-phy@47401b00 {
- compatible = "ti,am335x-usb-phy";
- reg = <0x47401b00 0x100>;
- reg-names = "phy";
- status = "disabled";
- ti,ctrl_mod = <&usb_ctrl_mod>;
- };
-
- usb1: usb@47401800 {
- compatible = "ti,musb-am33xx";
- status = "disabled";
- reg = <0x47401c00 0x400
- 0x47401800 0x200>;
- reg-names = "mc", "control";
- interrupts = <19>;
- interrupt-names = "mc";
- dr_mode = "otg";
- mentor,multipoint = <1>;
- mentor,num-eps = <16>;
- mentor,ram-bits = <12>;
- mentor,power = <500>;
- phys = <&usb1_phy>;
-
- dmas = <&cppi41dma 15 0 &cppi41dma 16 0
- &cppi41dma 17 0 &cppi41dma 18 0
- &cppi41dma 19 0 &cppi41dma 20 0
- &cppi41dma 21 0 &cppi41dma 22 0
- &cppi41dma 23 0 &cppi41dma 24 0
- &cppi41dma 25 0 &cppi41dma 26 0
- &cppi41dma 27 0 &cppi41dma 28 0
- &cppi41dma 29 0 &cppi41dma 15 1
- &cppi41dma 16 1 &cppi41dma 17 1
- &cppi41dma 18 1 &cppi41dma 19 1
- &cppi41dma 20 1 &cppi41dma 21 1
- &cppi41dma 22 1 &cppi41dma 23 1
- &cppi41dma 24 1 &cppi41dma 25 1
- &cppi41dma 26 1 &cppi41dma 27 1
- &cppi41dma 28 1 &cppi41dma 29 1>;
- dma-names =
- "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
- "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
- "rx14", "rx15",
- "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
- "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
- "tx14", "tx15";
- };
-
- cppi41dma: dma-controller@07402000 {
- compatible = "ti,am3359-cppi41";
- reg = <0x47400000 0x1000
- 0x47402000 0x1000
- 0x47403000 0x1000
- 0x47404000 0x4000>;
- reg-names = "glue", "controller", "scheduler", "queuemgr";
- interrupts = <17>;
- interrupt-names = "glue";
- #dma-cells = <2>;
- #dma-channels = <30>;
- #dma-requests = <256>;
- status = "disabled";
- };
- };
-
- epwmss0: epwmss@48300000 {
- compatible = "ti,am33xx-pwmss";
- reg = <0x48300000 0x10>;
- ti,hwmods = "epwmss0";
- #address-cells = <1>;
- #size-cells = <1>;
- status = "disabled";
- ranges = <0x48300100 0x48300100 0x80 /* ECAP */
- 0x48300180 0x48300180 0x80 /* EQEP */
- 0x48300200 0x48300200 0x80>; /* EHRPWM */
-
- ecap0: ecap@48300100 {
- compatible = "ti,am33xx-ecap";
- #pwm-cells = <3>;
- reg = <0x48300100 0x80>;
- ti,hwmods = "ecap0";
- status = "disabled";
- };
-
- ehrpwm0: ehrpwm@48300200 {
- compatible = "ti,am33xx-ehrpwm";
- #pwm-cells = <3>;
- reg = <0x48300200 0x80>;
- ti,hwmods = "ehrpwm0";
- status = "disabled";
- };
- };
-
- epwmss1: epwmss@48302000 {
- compatible = "ti,am33xx-pwmss";
- reg = <0x48302000 0x10>;
- ti,hwmods = "epwmss1";
- #address-cells = <1>;
- #size-cells = <1>;
- status = "disabled";
- ranges = <0x48302100 0x48302100 0x80 /* ECAP */
- 0x48302180 0x48302180 0x80 /* EQEP */
- 0x48302200 0x48302200 0x80>; /* EHRPWM */
-
- ecap1: ecap@48302100 {
- compatible = "ti,am33xx-ecap";
- #pwm-cells = <3>;
- reg = <0x48302100 0x80>;
- ti,hwmods = "ecap1";
- status = "disabled";
- };
-
- ehrpwm1: ehrpwm@48302200 {
- compatible = "ti,am33xx-ehrpwm";
- #pwm-cells = <3>;
- reg = <0x48302200 0x80>;
- ti,hwmods = "ehrpwm1";
- status = "disabled";
- };
- };
-
- epwmss2: epwmss@48304000 {
- compatible = "ti,am33xx-pwmss";
- reg = <0x48304000 0x10>;
- ti,hwmods = "epwmss2";
- #address-cells = <1>;
- #size-cells = <1>;
- status = "disabled";
- ranges = <0x48304100 0x48304100 0x80 /* ECAP */
- 0x48304180 0x48304180 0x80 /* EQEP */
- 0x48304200 0x48304200 0x80>; /* EHRPWM */
-
- ecap2: ecap@48304100 {
- compatible = "ti,am33xx-ecap";
- #pwm-cells = <3>;
- reg = <0x48304100 0x80>;
- ti,hwmods = "ecap2";
- status = "disabled";
- };
-
- ehrpwm2: ehrpwm@48304200 {
- compatible = "ti,am33xx-ehrpwm";
- #pwm-cells = <3>;
- reg = <0x48304200 0x80>;
- ti,hwmods = "ehrpwm2";
- status = "disabled";
- };
- };
-
- mac: ethernet@4a100000 {
- compatible = "ti,cpsw";
- ti,hwmods = "cpgmac0";
- cpdma_channels = <8>;
- ale_entries = <1024>;
- bd_ram_size = <0x2000>;
- no_bd_ram = <0>;
- rx_descs = <64>;
- mac_control = <0x20>;
- slaves = <2>;
- active_slave = <0>;
- cpts_clock_mult = <0x80000000>;
- cpts_clock_shift = <29>;
- reg = <0x4a100000 0x800
- 0x4a101200 0x100>;
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&intc>;
- /*
- * c0_rx_thresh_pend
- * c0_rx_pend
- * c0_tx_pend
- * c0_misc_pend
- */
- interrupts = <40 41 42 43>;
- ranges;
-
- davinci_mdio: mdio@4a101000 {
- compatible = "ti,davinci_mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- ti,hwmods = "davinci_mdio";
- bus_freq = <1000000>;
- reg = <0x4a101000 0x100>;
- };
-
- cpsw_emac0: slave@4a100200 {
- /* Filled in by U-Boot */
- mac-address = [ 00 00 00 00 00 00 ];
- };
-
- cpsw_emac1: slave@4a100300 {
- /* Filled in by U-Boot */
- mac-address = [ 00 00 00 00 00 00 ];
- };
-
- phy_sel: cpsw-phy-sel@44e10650 {
- compatible = "ti,am3352-cpsw-phy-sel";
- reg= <0x44e10650 0x4>;
- reg-names = "gmii-sel";
- };
- };
-
- ocmcram: ocmcram@40300000 {
- compatible = "ti,am3352-ocmcram";
- reg = <0x40300000 0x10000>;
- ti,hwmods = "ocmcram";
- };
-
- wkup_m3: wkup_m3@44d00000 {
- compatible = "ti,am3353-wkup-m3";
- reg = <0x44d00000 0x4000 /* M3 UMEM */
- 0x44d80000 0x2000>; /* M3 DMEM */
- ti,hwmods = "wkup_m3";
- ti,no-reset-on-init;
- };
-
- elm: elm@48080000 {
- compatible = "ti,am3352-elm";
- reg = <0x48080000 0x2000>;
- interrupts = <4>;
- ti,hwmods = "elm";
- status = "disabled";
- };
-
- lcdc: lcdc@4830e000 {
- compatible = "ti,am33xx-tilcdc";
- reg = <0x4830e000 0x1000>;
- interrupt-parent = <&intc>;
- interrupts = <36>;
- ti,hwmods = "lcdc";
- status = "disabled";
- };
-
- tscadc: tscadc@44e0d000 {
- compatible = "ti,am3359-tscadc";
- reg = <0x44e0d000 0x1000>;
- interrupt-parent = <&intc>;
- interrupts = <16>;
- ti,hwmods = "adc_tsc";
- status = "disabled";
-
- tsc {
- compatible = "ti,am3359-tsc";
- };
- am335x_adc: adc {
- #io-channel-cells = <1>;
- compatible = "ti,am3359-adc";
- };
- };
-
- gpmc: gpmc@50000000 {
- compatible = "ti,am3352-gpmc";
- ti,hwmods = "gpmc";
- ti,no-idle-on-init;
- reg = <0x50000000 0x2000>;
- interrupts = <100>;
- gpmc,num-cs = <7>;
- gpmc,num-waitpins = <2>;
- #address-cells = <2>;
- #size-cells = <1>;
- status = "disabled";
- };
-
- sham: sham@53100000 {
- compatible = "ti,omap4-sham";
- ti,hwmods = "sham";
- reg = <0x53100000 0x200>;
- interrupts = <109>;
- dmas = <&edma 36>;
- dma-names = "rx";
- };
-
- aes: aes@53500000 {
- compatible = "ti,omap4-aes";
- ti,hwmods = "aes";
- reg = <0x53500000 0xa0>;
- interrupts = <103>;
- dmas = <&edma 6>,
- <&edma 5>;
- dma-names = "tx", "rx";
- };
-
- mcasp0: mcasp@48038000 {
- compatible = "ti,am33xx-mcasp-audio";
- ti,hwmods = "mcasp0";
- reg = <0x48038000 0x2000>,
- <0x46000000 0x400000>;
- reg-names = "mpu", "dat";
- interrupts = <80>, <81>;
- interrupts-names = "tx", "rx";
- status = "disabled";
- dmas = <&edma 8>,
- <&edma 9>;
- dma-names = "tx", "rx";
- };
-
- mcasp1: mcasp@4803C000 {
- compatible = "ti,am33xx-mcasp-audio";
- ti,hwmods = "mcasp1";
- reg = <0x4803C000 0x2000>,
- <0x46400000 0x400000>;
- reg-names = "mpu", "dat";
- interrupts = <82>, <83>;
- interrupts-names = "tx", "rx";
- status = "disabled";
- dmas = <&edma 10>,
- <&edma 11>;
- dma-names = "tx", "rx";
- };
-
- rng: rng@48310000 {
- compatible = "ti,omap4-rng";
- ti,hwmods = "rng";
- reg = <0x48310000 0x2000>;
- interrupts = <111>;
- };
};
};
--
1.9.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 11/12] ARM: Tegra20: Use upstream dtsi files
2014-04-28 7:45 [PATCH] Add Linux dts files and use them Sascha Hauer
` (8 preceding siblings ...)
2014-04-28 7:45 ` [PATCH 10/12] ARM: AM33xx: " Sascha Hauer
@ 2014-04-28 7:46 ` Sascha Hauer
2014-04-28 7:46 ` [PATCH 12/12] ARM: dove: Use upstream dtsi file Sascha Hauer
2014-05-05 8:20 ` [PATCH] Add Linux dts files and use them Sascha Hauer
11 siblings, 0 replies; 23+ messages in thread
From: Sascha Hauer @ 2014-04-28 7:46 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/dts/tegra20-colibri-iris.dts | 2 +-
arch/arm/dts/tegra20-colibri.dtsi | 525 +--------------------------
arch/arm/dts/tegra20-paz00.dts | 540 +---------------------------
arch/arm/dts/tegra20.dtsi | 650 +---------------------------------
4 files changed, 4 insertions(+), 1713 deletions(-)
diff --git a/arch/arm/dts/tegra20-colibri-iris.dts b/arch/arm/dts/tegra20-colibri-iris.dts
index 31b0f59..ef5f2c1 100644
--- a/arch/arm/dts/tegra20-colibri-iris.dts
+++ b/arch/arm/dts/tegra20-colibri-iris.dts
@@ -12,7 +12,7 @@
};
};
- pinmux {
+ pinmux@70000014 {
state_default: pinmux {
hdint {
nvidia,tristate = <0>;
diff --git a/arch/arm/dts/tegra20-colibri.dtsi b/arch/arm/dts/tegra20-colibri.dtsi
index d6b7aef..96da8a4 100644
--- a/arch/arm/dts/tegra20-colibri.dtsi
+++ b/arch/arm/dts/tegra20-colibri.dtsi
@@ -1,524 +1 @@
-#include "tegra20.dtsi"
-
-/ {
- model = "Toradex Colibri T20";
- compatible = "toradex,colibri_t20", "nvidia,tegra20";
-
- host1x {
- hdmi {
- vdd-supply = <&hdmi_vdd_reg>;
- pll-supply = <&hdmi_pll_reg>;
-
- nvidia,ddc-i2c-bus = <&i2c_ddc>;
- nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
- GPIO_ACTIVE_HIGH>;
- };
- };
-
- pinmux {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- audio_refclk {
- nvidia,pins = "cdev1";
- nvidia,function = "plla_out";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- };
- crt {
- nvidia,pins = "crtp";
- nvidia,function = "crt";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
- };
- dap3 {
- nvidia,pins = "dap3";
- nvidia,function = "dap3";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- };
- displaya {
- nvidia,pins = "ld0", "ld1", "ld2", "ld3",
- "ld4", "ld5", "ld6", "ld7", "ld8",
- "ld9", "ld10", "ld11", "ld12", "ld13",
- "ld14", "ld15", "ld16", "ld17",
- "lhs", "lpw0", "lpw2", "lsc0",
- "lsc1", "lsck", "lsda", "lspi", "lvs";
- nvidia,function = "displaya";
- nvidia,tristate = <1>;
- };
- gpio_dte {
- nvidia,pins = "dte";
- nvidia,function = "rsvd1";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- };
- gpio_gmi {
- nvidia,pins = "ata", "atc", "atd", "ate",
- "dap1", "dap2", "dap4", "gpu", "irrx",
- "irtx", "spia", "spib", "spic";
- nvidia,function = "gmi";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- };
- gpio_pta {
- nvidia,pins = "pta";
- nvidia,function = "rsvd4";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- };
- gpio_uac {
- nvidia,pins = "uac";
- nvidia,function = "rsvd2";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- };
- hdint {
- nvidia,pins = "hdint";
- nvidia,function = "hdmi";
- nvidia,tristate = <1>;
- };
- i2c1 {
- nvidia,pins = "rm";
- nvidia,function = "i2c1";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
- };
- i2c3 {
- nvidia,pins = "dtf";
- nvidia,function = "i2c3";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
- };
- i2cddc {
- nvidia,pins = "ddc";
- nvidia,function = "i2c2";
- nvidia,pull = <2>;
- nvidia,tristate = <1>;
- };
- i2cp {
- nvidia,pins = "i2cp";
- nvidia,function = "i2cp";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- };
- irda {
- nvidia,pins = "uad";
- nvidia,function = "irda";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
- };
- nand {
- nvidia,pins = "kbca", "kbcc", "kbcd",
- "kbce", "kbcf";
- nvidia,function = "nand";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- };
- owc {
- nvidia,pins = "owc";
- nvidia,function = "owr";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
- };
- pmc {
- nvidia,pins = "pmc";
- nvidia,function = "pwr_on";
- nvidia,tristate = <0>;
- };
- pwm {
- nvidia,pins = "sdb", "sdc", "sdd";
- nvidia,function = "pwm";
- nvidia,tristate = <1>;
- };
- sdio4 {
- nvidia,pins = "atb", "gma", "gme";
- nvidia,function = "sdio4";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
- };
- spi1 {
- nvidia,pins = "spid", "spie", "spif";
- nvidia,function = "spi1";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
- };
- spi4 {
- nvidia,pins = "slxa", "slxc", "slxd", "slxk";
- nvidia,function = "spi4";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
- };
- uarta {
- nvidia,pins = "sdio1";
- nvidia,function = "uarta";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
- };
- uartd {
- nvidia,pins = "gmc";
- nvidia,function = "uartd";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
- };
- ulpi {
- nvidia,pins = "uaa", "uab", "uda";
- nvidia,function = "ulpi";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- };
- ulpi_refclk {
- nvidia,pins = "cdev2";
- nvidia,function = "pllp_out4";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- };
- usb_gpio {
- nvidia,pins = "spig", "spih";
- nvidia,function = "spi2_alt";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- };
- vi {
- nvidia,pins = "dta", "dtb", "dtc", "dtd";
- nvidia,function = "vi";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
- };
- vi_sc {
- nvidia,pins = "csus";
- nvidia,function = "vi_sensor_clk";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
- };
- };
- };
-
- i2c@7000c000 {
- clock-frequency = <400000>;
- };
-
- i2c_ddc: i2c@7000c400 {
- clock-frequency = <100000>;
- };
-
- i2c@7000c500 {
- clock-frequency = <400000>;
- };
-
- i2c@7000d000 {
- status = "okay";
- clock-frequency = <400000>;
-
- pmic: tps6586x@34 {
- compatible = "ti,tps6586x";
- reg = <0x34>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-
- ti,system-power-controller;
-
- #gpio-cells = <2>;
- gpio-controller;
-
- sys-supply = <&vdd_5v0_reg>;
- vin-sm0-supply = <&sys_reg>;
- vin-sm1-supply = <&sys_reg>;
- vin-sm2-supply = <&sys_reg>;
- vinldo01-supply = <&sm2_reg>;
- vinldo23-supply = <&sm2_reg>;
- vinldo4-supply = <&sm2_reg>;
- vinldo678-supply = <&sm2_reg>;
- vinldo9-supply = <&sm2_reg>;
-
- regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
- sys_reg: regulator@0 {
- reg = <0>;
- regulator-compatible = "sys";
- regulator-name = "vdd_sys";
- regulator-always-on;
- };
-
- regulator@1 {
- reg = <1>;
- regulator-compatible = "sm0";
- regulator-name = "vdd_sm0,vdd_core";
- regulator-min-microvolt = <1275000>;
- regulator-max-microvolt = <1275000>;
- regulator-always-on;
- };
-
- regulator@2 {
- reg = <2>;
- regulator-compatible = "sm1";
- regulator-name = "vdd_sm1,vdd_cpu";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- sm2_reg: regulator@3 {
- reg = <3>;
- regulator-compatible = "sm2";
- regulator-name = "vdd_sm2,vin_ldo*";
- regulator-min-microvolt = <3700000>;
- regulator-max-microvolt = <3700000>;
- regulator-always-on;
- };
-
- /* LDO0 is not connected to anything */
-
- regulator@5 {
- reg = <5>;
- regulator-compatible = "ldo1";
- regulator-name = "vdd_ldo1,avdd_pll*";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- regulator@6 {
- reg = <6>;
- regulator-compatible = "ldo2";
- regulator-name = "vdd_ldo2,vdd_rtc";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- /* LDO3 is not connected to anything */
-
- regulator@8 {
- reg = <8>;
- regulator-compatible = "ldo4";
- regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo5_reg: regulator@9 {
- reg = <9>;
- regulator-compatible = "ldo5";
- regulator-name = "vdd_ldo5,vdd_fuse";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- regulator@10 {
- reg = <10>;
- regulator-compatible = "ldo6";
- regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- hdmi_vdd_reg: regulator@11 {
- reg = <11>;
- regulator-compatible = "ldo7";
- regulator-name = "vdd_ldo7,avdd_hdmi";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- hdmi_pll_reg: regulator@12 {
- reg = <12>;
- regulator-compatible = "ldo8";
- regulator-name = "vdd_ldo8,avdd_hdmi_pll";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- regulator@13 {
- reg = <13>;
- regulator-compatible = "ldo9";
- regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- regulator-always-on;
- };
-
- regulator@14 {
- reg = <14>;
- regulator-compatible = "ldo_rtc";
- regulator-name = "vdd_rtc_out,vdd_cell";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
- };
- };
-
- temperature-sensor@4c {
- compatible = "national,lm95245";
- reg = <0x4c>;
- };
- };
-
- pmc {
- nvidia,suspend-mode = <1>;
- nvidia,cpu-pwr-good-time = <5000>;
- nvidia,cpu-pwr-off-time = <5000>;
- nvidia,core-pwr-good-time = <3845 3845>;
- nvidia,core-pwr-off-time = <3875>;
- nvidia,sys-clock-req-active-high;
- };
-
- memory-controller@7000f400 {
- emc-table@83250 {
- reg = <83250>;
- compatible = "nvidia,tegra20-emc-table";
- clock-frequency = <83250>;
- nvidia,emc-registers = <0x00000005 0x00000011
- 0x00000004 0x00000002 0x00000004 0x00000004
- 0x00000001 0x0000000a 0x00000002 0x00000002
- 0x00000001 0x00000001 0x00000003 0x00000004
- 0x00000003 0x00000009 0x0000000c 0x0000025f
- 0x00000000 0x00000003 0x00000003 0x00000002
- 0x00000002 0x00000001 0x00000008 0x000000c8
- 0x00000003 0x00000005 0x00000003 0x0000000c
- 0x00000002 0x00000000 0x00000000 0x00000002
- 0x00000000 0x00000000 0x00000083 0x00520006
- 0x00000010 0x00000008 0x00000000 0x00000000
- 0x00000000 0x00000000 0x00000000 0x00000000>;
- };
- emc-table@133200 {
- reg = <133200>;
- compatible = "nvidia,tegra20-emc-table";
- clock-frequency = <133200>;
- nvidia,emc-registers = <0x00000008 0x00000019
- 0x00000006 0x00000002 0x00000004 0x00000004
- 0x00000001 0x0000000a 0x00000002 0x00000002
- 0x00000002 0x00000001 0x00000003 0x00000004
- 0x00000003 0x00000009 0x0000000c 0x0000039f
- 0x00000000 0x00000003 0x00000003 0x00000002
- 0x00000002 0x00000001 0x00000008 0x000000c8
- 0x00000003 0x00000007 0x00000003 0x0000000c
- 0x00000002 0x00000000 0x00000000 0x00000002
- 0x00000000 0x00000000 0x00000083 0x00510006
- 0x00000010 0x00000008 0x00000000 0x00000000
- 0x00000000 0x00000000 0x00000000 0x00000000>;
- };
- emc-table@166500 {
- reg = <166500>;
- compatible = "nvidia,tegra20-emc-table";
- clock-frequency = <166500>;
- nvidia,emc-registers = <0x0000000a 0x00000021
- 0x00000008 0x00000003 0x00000004 0x00000004
- 0x00000002 0x0000000a 0x00000003 0x00000003
- 0x00000002 0x00000001 0x00000003 0x00000004
- 0x00000003 0x00000009 0x0000000c 0x000004df
- 0x00000000 0x00000003 0x00000003 0x00000003
- 0x00000003 0x00000001 0x00000009 0x000000c8
- 0x00000003 0x00000009 0x00000004 0x0000000c
- 0x00000002 0x00000000 0x00000000 0x00000002
- 0x00000000 0x00000000 0x00000083 0x004f0006
- 0x00000010 0x00000008 0x00000000 0x00000000
- 0x00000000 0x00000000 0x00000000 0x00000000>;
- };
- emc-table@333000 {
- reg = <333000>;
- compatible = "nvidia,tegra20-emc-table";
- clock-frequency = <333000>;
- nvidia,emc-registers = <0x00000014 0x00000041
- 0x0000000f 0x00000005 0x00000004 0x00000005
- 0x00000003 0x0000000a 0x00000005 0x00000005
- 0x00000004 0x00000001 0x00000003 0x00000004
- 0x00000003 0x00000009 0x0000000c 0x000009ff
- 0x00000000 0x00000003 0x00000003 0x00000005
- 0x00000005 0x00000001 0x0000000e 0x000000c8
- 0x00000003 0x00000011 0x00000006 0x0000000c
- 0x00000002 0x00000000 0x00000000 0x00000002
- 0x00000000 0x00000000 0x00000083 0x00380006
- 0x00000010 0x00000008 0x00000000 0x00000000
- 0x00000000 0x00000000 0x00000000 0x00000000>;
- };
- };
-
- ac97: ac97 {
- status = "okay";
- nvidia,codec-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
- GPIO_ACTIVE_HIGH>;
- nvidia,codec-sync-gpio = <&gpio TEGRA_GPIO(P, 0)
- GPIO_ACTIVE_HIGH>;
- };
-
- usb@c5004000 {
- status = "okay";
- nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
- GPIO_ACTIVE_LOW>;
- };
-
- usb-phy@c5004000 {
- status = "okay";
- nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
- GPIO_ACTIVE_LOW>;
- };
-
- sdhci@c8000600 {
- cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
- };
-
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- clk32k_in: clock {
- compatible = "fixed-clock";
- reg=<0>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
- };
-
- sound {
- compatible = "nvidia,tegra-audio-wm9712-colibri_t20",
- "nvidia,tegra-audio-wm9712";
- nvidia,model = "Colibri T20 AC97 Audio";
-
- nvidia,audio-routing =
- "Headphone", "HPOUTL",
- "Headphone", "HPOUTR",
- "LineIn", "LINEINL",
- "LineIn", "LINEINR",
- "Mic", "MIC1";
-
- nvidia,ac97-controller = <&ac97>;
-
- clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
- <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
- <&tegra_car TEGRA20_CLK_CDEV1>;
- clock-names = "pll_a", "pll_a_out0", "mclk";
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- vdd_5v0_reg: regulator@100 {
- compatible = "regulator-fixed";
- reg = <100>;
- regulator-name = "vdd_5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
- regulator@101 {
- compatible = "regulator-fixed";
- reg = <101>;
- regulator-name = "internal_usb";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-boot-on;
- regulator-always-on;
- gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>;
- };
- };
-};
+#include <arm/tegra20-colibri-512.dtsi>
diff --git a/arch/arm/dts/tegra20-paz00.dts b/arch/arm/dts/tegra20-paz00.dts
index d82d406..f3a3759 100644
--- a/arch/arm/dts/tegra20-paz00.dts
+++ b/arch/arm/dts/tegra20-paz00.dts
@@ -1,540 +1,2 @@
-/dts-v1/;
-
+#include <arm/tegra20-paz00.dts>
#include "tegra20.dtsi"
-
-/ {
- model = "Toshiba AC100 / Dynabook AZ";
- compatible = "compal,paz00", "nvidia,tegra20";
-
- host1x {
- hdmi {
- status = "okay";
-
- vdd-supply = <&hdmi_vdd_reg>;
- pll-supply = <&hdmi_pll_reg>;
-
- nvidia,ddc-i2c-bus = <&hdmi_ddc>;
- nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
- GPIO_ACTIVE_HIGH>;
- };
- };
-
- pinmux {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- ata {
- nvidia,pins = "ata", "atc", "atd", "ate",
- "dap2", "gmb", "gmc", "gmd", "spia",
- "spib", "spic", "spid", "spie";
- nvidia,function = "gmi";
- };
- atb {
- nvidia,pins = "atb", "gma", "gme";
- nvidia,function = "sdio4";
- };
- cdev1 {
- nvidia,pins = "cdev1";
- nvidia,function = "plla_out";
- };
- cdev2 {
- nvidia,pins = "cdev2";
- nvidia,function = "pllp_out4";
- };
- crtp {
- nvidia,pins = "crtp";
- nvidia,function = "crt";
- };
- csus {
- nvidia,pins = "csus";
- nvidia,function = "pllc_out1";
- };
- dap1 {
- nvidia,pins = "dap1";
- nvidia,function = "dap1";
- };
- dap3 {
- nvidia,pins = "dap3";
- nvidia,function = "dap3";
- };
- dap4 {
- nvidia,pins = "dap4";
- nvidia,function = "dap4";
- };
- ddc {
- nvidia,pins = "ddc";
- nvidia,function = "i2c2";
- };
- dta {
- nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
- nvidia,function = "rsvd1";
- };
- dtf {
- nvidia,pins = "dtf";
- nvidia,function = "i2c3";
- };
- gpu {
- nvidia,pins = "gpu", "sdb", "sdd";
- nvidia,function = "pwm";
- };
- gpu7 {
- nvidia,pins = "gpu7";
- nvidia,function = "rtck";
- };
- gpv {
- nvidia,pins = "gpv", "slxa", "slxk";
- nvidia,function = "pcie";
- };
- hdint {
- nvidia,pins = "hdint", "pta";
- nvidia,function = "hdmi";
- };
- i2cp {
- nvidia,pins = "i2cp";
- nvidia,function = "i2cp";
- };
- irrx {
- nvidia,pins = "irrx", "irtx";
- nvidia,function = "uarta";
- };
- kbca {
- nvidia,pins = "kbca", "kbcc", "kbce", "kbcf";
- nvidia,function = "kbc";
- };
- kbcb {
- nvidia,pins = "kbcb", "kbcd";
- nvidia,function = "sdio2";
- };
- lcsn {
- nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
- "ld3", "ld4", "ld5", "ld6", "ld7",
- "ld8", "ld9", "ld10", "ld11", "ld12",
- "ld13", "ld14", "ld15", "ld16", "ld17",
- "ldc", "ldi", "lhp0", "lhp1", "lhp2",
- "lhs", "lm0", "lm1", "lpp", "lpw0",
- "lpw1", "lpw2", "lsc0", "lsc1", "lsck",
- "lsda", "lsdi", "lspi", "lvp0", "lvp1",
- "lvs";
- nvidia,function = "displaya";
- };
- owc {
- nvidia,pins = "owc";
- nvidia,function = "owr";
- };
- pmc {
- nvidia,pins = "pmc";
- nvidia,function = "pwr_on";
- };
- rm {
- nvidia,pins = "rm";
- nvidia,function = "i2c1";
- };
- sdc {
- nvidia,pins = "sdc";
- nvidia,function = "twc";
- };
- sdio1 {
- nvidia,pins = "sdio1";
- nvidia,function = "sdio1";
- };
- slxc {
- nvidia,pins = "slxc", "slxd";
- nvidia,function = "spi4";
- };
- spdi {
- nvidia,pins = "spdi", "spdo";
- nvidia,function = "rsvd2";
- };
- spif {
- nvidia,pins = "spif", "uac";
- nvidia,function = "rsvd4";
- };
- spig {
- nvidia,pins = "spig", "spih";
- nvidia,function = "spi2_alt";
- };
- uaa {
- nvidia,pins = "uaa", "uab", "uda";
- nvidia,function = "ulpi";
- };
- uad {
- nvidia,pins = "uad";
- nvidia,function = "spdif";
- };
- uca {
- nvidia,pins = "uca", "ucb";
- nvidia,function = "uartc";
- };
- conf_ata {
- nvidia,pins = "ata", "atb", "atc", "atd", "ate",
- "cdev1", "cdev2", "dap1", "dap2", "dtf",
- "gma", "gmb", "gmc", "gmd", "gme",
- "gpu", "gpu7", "gpv", "i2cp", "pta",
- "rm", "sdio1", "slxk", "spdo", "uac",
- "uda";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- };
- conf_ck32 {
- nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
- "pmcc", "pmcd", "pmce", "xm2c", "xm2d";
- nvidia,pull = <0>;
- };
- conf_crtp {
- nvidia,pins = "crtp", "dap3", "dap4", "dtb",
- "dtc", "dte", "slxa", "slxc", "slxd",
- "spdi";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
- };
- conf_csus {
- nvidia,pins = "csus", "spia", "spib", "spid",
- "spif";
- nvidia,pull = <1>;
- nvidia,tristate = <1>;
- };
- conf_ddc {
- nvidia,pins = "ddc", "irrx", "irtx", "kbca",
- "kbcb", "kbcc", "kbcd", "kbce", "kbcf",
- "spic", "spig", "uaa", "uab";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
- };
- conf_dta {
- nvidia,pins = "dta", "dtd", "owc", "sdc", "sdd",
- "spie", "spih", "uad", "uca", "ucb";
- nvidia,pull = <2>;
- nvidia,tristate = <1>;
- };
- conf_hdint {
- nvidia,pins = "hdint", "ld0", "ld1", "ld2",
- "ld3", "ld4", "ld5", "ld6", "ld7",
- "ld8", "ld9", "ld10", "ld11", "ld12",
- "ld13", "ld14", "ld15", "ld16", "ld17",
- "ldc", "ldi", "lhs", "lsc0", "lspi",
- "lvs", "pmc";
- nvidia,tristate = <0>;
- };
- conf_lc {
- nvidia,pins = "lc", "ls";
- nvidia,pull = <2>;
- };
- conf_lcsn {
- nvidia,pins = "lcsn", "lhp0", "lhp1", "lhp2",
- "lm0", "lm1", "lpp", "lpw0", "lpw1",
- "lpw2", "lsc1", "lsck", "lsda", "lsdi",
- "lvp0", "lvp1", "sdb";
- nvidia,tristate = <1>;
- };
- conf_ld17_0 {
- nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
- "ld23_22";
- nvidia,pull = <1>;
- };
- };
- };
-
- i2s@70002800 {
- status = "okay";
- };
-
- serial@70006000 {
- status = "okay";
- };
-
- serial@70006200 {
- status = "okay";
- };
-
- i2c@7000c000 {
- status = "okay";
- clock-frequency = <400000>;
-
- alc5632: alc5632@1e {
- compatible = "realtek,alc5632";
- reg = <0x1e>;
- gpio-controller;
- #gpio-cells = <2>;
- };
- };
-
- hdmi_ddc: i2c@7000c400 {
- status = "okay";
- clock-frequency = <100000>;
- };
-
- nvec {
- compatible = "nvidia,nvec";
- reg = <0x7000c500 0x100>;
- interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clock-frequency = <80000>;
- request-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
- slave-addr = <138>;
- clocks = <&tegra_car TEGRA20_CLK_I2C3>,
- <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
- clock-names = "div-clk", "fast-clk";
- };
-
- i2c@7000d000 {
- status = "okay";
- clock-frequency = <400000>;
-
- pmic: tps6586x@34 {
- compatible = "ti,tps6586x";
- reg = <0x34>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-
- #gpio-cells = <2>;
- gpio-controller;
-
- sys-supply = <&p5valw_reg>;
- vin-sm0-supply = <&sys_reg>;
- vin-sm1-supply = <&sys_reg>;
- vin-sm2-supply = <&sys_reg>;
- vinldo01-supply = <&sm2_reg>;
- vinldo23-supply = <&sm2_reg>;
- vinldo4-supply = <&sm2_reg>;
- vinldo678-supply = <&sm2_reg>;
- vinldo9-supply = <&sm2_reg>;
-
- regulators {
- sys_reg: sys {
- regulator-name = "vdd_sys";
- regulator-always-on;
- };
-
- sm0 {
- regulator-name = "+1.2vs_sm0,vdd_core";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- sm1 {
- regulator-name = "+1.0vs_sm1,vdd_cpu";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- sm2_reg: sm2 {
- regulator-name = "+3.7vs_sm2,vin_ldo*";
- regulator-min-microvolt = <3700000>;
- regulator-max-microvolt = <3700000>;
- regulator-always-on;
- };
-
- /* LDO0 is not connected to anything */
-
- ldo1 {
- regulator-name = "+1.1vs_ldo1,avdd_pll*";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- ldo2 {
- regulator-name = "+1.2vs_ldo2,vdd_rtc";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- ldo3 {
- regulator-name = "+3.3vs_ldo3,avdd_usb*";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- ldo4 {
- regulator-name = "+1.8vs_ldo4,avdd_osc,vddio_sys";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo5 {
- regulator-name = "+2.85vs_ldo5,vcore_mmc";
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- regulator-always-on;
- };
-
- ldo6 {
- /*
- * Research indicates this should be
- * 1.8v; other boards that use this
- * rail for the same purpose need it
- * set to 1.8v. The schematic signal
- * name is incorrect; perhaps copied
- * from an incorrect NVIDIA reference.
- */
- regulator-name = "+2.85vs_ldo6,avdd_vdac";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- hdmi_vdd_reg: ldo7 {
- regulator-name = "+3.3vs_ldo7,avdd_hdmi";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- hdmi_pll_reg: ldo8 {
- regulator-name = "+1.8vs_ldo8,avdd_hdmi_pll";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo9 {
- regulator-name = "+2.85vs_ldo9,vdd_ddr_rx";
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- regulator-always-on;
- };
-
- ldo_rtc {
- regulator-name = "+3.3vs_rtc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
- };
- };
-
- adt7461@4c {
- compatible = "adi,adt7461";
- reg = <0x4c>;
- };
- };
-
- pmc {
- nvidia,invert-interrupt;
- nvidia,suspend-mode = <1>;
- nvidia,cpu-pwr-good-time = <2000>;
- nvidia,cpu-pwr-off-time = <0>;
- nvidia,core-pwr-good-time = <3845 3845>;
- nvidia,core-pwr-off-time = <0>;
- nvidia,sys-clock-req-active-high;
- };
-
- usb@c5000000 {
- status = "okay";
- };
-
- usb-phy@c5000000 {
- status = "okay";
- };
-
- usb@c5004000 {
- status = "okay";
- nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
- GPIO_ACTIVE_LOW>;
- };
-
- usb-phy@c5004000 {
- status = "okay";
- nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
- GPIO_ACTIVE_LOW>;
- };
-
- usb@c5008000 {
- status = "okay";
- };
-
- usb-phy@c5008000 {
- status = "okay";
- };
-
- sdhci@c8000000 {
- status = "okay";
- cd-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
- power-gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
- bus-width = <4>;
- };
-
- sdhci@c8000600 {
- status = "okay";
- bus-width = <8>;
- non-removable;
- };
-
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- clk32k_in: clock {
- compatible = "fixed-clock";
- reg=<0>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- power {
- label = "Power";
- gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>;
- linux,code = <116>; /* KEY_POWER */
- gpio-key,wakeup;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- wifi {
- label = "wifi-led";
- gpios = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "rfkill0";
- };
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- p5valw_reg: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "+5valw";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
- };
-
- sound {
- compatible = "nvidia,tegra-audio-alc5632-paz00",
- "nvidia,tegra-audio-alc5632";
-
- nvidia,model = "Compal PAZ00";
-
- nvidia,audio-routing =
- "Int Spk", "SPKOUT",
- "Int Spk", "SPKOUTN",
- "Headset Mic", "MICBIAS1",
- "MIC1", "Headset Mic",
- "Headset Stereophone", "HPR",
- "Headset Stereophone", "HPL",
- "DMICDAT", "Digital Mic";
-
- nvidia,audio-codec = <&alc5632>;
- nvidia,i2s-controller = <&tegra_i2s1>;
- nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
- GPIO_ACTIVE_HIGH>;
-
- clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
- <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
- <&tegra_car TEGRA20_CLK_CDEV1>;
- clock-names = "pll_a", "pll_a_out0", "mclk";
- };
-};
diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi
index df40b54..ce7d322 100644
--- a/arch/arm/dts/tegra20.dtsi
+++ b/arch/arm/dts/tegra20.dtsi
@@ -1,649 +1 @@
-#include <dt-bindings/clock/tegra20-car.h>
-#include <dt-bindings/gpio/tegra-gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-#include "skeleton.dtsi"
-
-/ {
- compatible = "nvidia,tegra20";
- interrupt-parent = <&intc>;
-
- aliases {
- serial0 = &uarta;
- serial1 = &uartb;
- serial2 = &uartc;
- serial3 = &uartd;
- serial4 = &uarte;
- };
-
- host1x {
- compatible = "nvidia,tegra20-host1x", "simple-bus";
- reg = <0x50000000 0x00024000>;
- interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
- <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
- clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- ranges = <0x54000000 0x54000000 0x04000000>;
-
- mpe {
- compatible = "nvidia,tegra20-mpe";
- reg = <0x54040000 0x00040000>;
- interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&tegra_car TEGRA20_CLK_MPE>;
- };
-
- vi {
- compatible = "nvidia,tegra20-vi";
- reg = <0x54080000 0x00040000>;
- interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&tegra_car TEGRA20_CLK_VI>;
- };
-
- epp {
- compatible = "nvidia,tegra20-epp";
- reg = <0x540c0000 0x00040000>;
- interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&tegra_car TEGRA20_CLK_EPP>;
- };
-
- isp {
- compatible = "nvidia,tegra20-isp";
- reg = <0x54100000 0x00040000>;
- interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&tegra_car TEGRA20_CLK_ISP>;
- };
-
- gr2d {
- compatible = "nvidia,tegra20-gr2d";
- reg = <0x54140000 0x00040000>;
- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&tegra_car TEGRA20_CLK_GR2D>;
- };
-
- gr3d {
- compatible = "nvidia,tegra20-gr3d";
- reg = <0x54180000 0x00040000>;
- clocks = <&tegra_car TEGRA20_CLK_GR3D>;
- };
-
- dc@54200000 {
- compatible = "nvidia,tegra20-dc";
- reg = <0x54200000 0x00040000>;
- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&tegra_car TEGRA20_CLK_DISP1>,
- <&tegra_car TEGRA20_CLK_PLL_P>;
- clock-names = "disp1", "parent";
-
- rgb {
- status = "disabled";
- };
- };
-
- dc@54240000 {
- compatible = "nvidia,tegra20-dc";
- reg = <0x54240000 0x00040000>;
- interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&tegra_car TEGRA20_CLK_DISP2>,
- <&tegra_car TEGRA20_CLK_PLL_P>;
- clock-names = "disp2", "parent";
-
- rgb {
- status = "disabled";
- };
- };
-
- hdmi {
- compatible = "nvidia,tegra20-hdmi";
- reg = <0x54280000 0x00040000>;
- interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&tegra_car TEGRA20_CLK_HDMI>,
- <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
- clock-names = "hdmi", "parent";
- status = "disabled";
- };
-
- tvo {
- compatible = "nvidia,tegra20-tvo";
- reg = <0x542c0000 0x00040000>;
- interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&tegra_car TEGRA20_CLK_TVO>;
- status = "disabled";
- };
-
- dsi {
- compatible = "nvidia,tegra20-dsi";
- reg = <0x54300000 0x00040000>;
- clocks = <&tegra_car TEGRA20_CLK_DSI>;
- status = "disabled";
- };
- };
-
- timer@50004600 {
- compatible = "arm,cortex-a9-twd-timer";
- reg = <0x50040600 0x20>;
- interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
- clocks = <&tegra_car TEGRA20_CLK_TWD>;
- };
-
- intc: interrupt-controller {
- compatible = "arm,cortex-a9-gic";
- reg = <0x50041000 0x1000
- 0x50040100 0x0100>;
- interrupt-controller;
- #interrupt-cells = <3>;
- };
-
- cache-controller {
- compatible = "arm,pl310-cache";
- reg = <0x50043000 0x1000>;
- arm,data-latency = <5 5 2>;
- arm,tag-latency = <4 4 2>;
- cache-unified;
- cache-level = <2>;
- };
-
- timer@60005000 {
- compatible = "nvidia,tegra20-timer";
- reg = <0x60005000 0x60>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&tegra_car TEGRA20_CLK_TIMER>;
- };
-
- tegra_car: clock {
- compatible = "nvidia,tegra20-car";
- reg = <0x60006000 0x1000>;
- #clock-cells = <1>;
- };
-
- apbdma: dma {
- compatible = "nvidia,tegra20-apbdma";
- reg = <0x6000a000 0x1200>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&tegra_car TEGRA20_CLK_APBDMA>;
- };
-
- ahb {
- compatible = "nvidia,tegra20-ahb";
- reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */
- };
-
- gpio: gpio {
- compatible = "nvidia,tegra20-gpio";
- reg = <0x6000d000 0x1000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
- #gpio-cells = <2>;
- gpio-controller;
- #interrupt-cells = <2>;
- interrupt-controller;
- };
-
- pinmux: pinmux {
- compatible = "nvidia,tegra20-pinmux";
- reg = <0x70000014 0x10 /* Tri-state registers */
- 0x70000080 0x20 /* Mux registers */
- 0x700000a0 0x14 /* Pull-up/down registers */
- 0x70000868 0xa8>; /* Pad control registers */
- };
-
- das {
- compatible = "nvidia,tegra20-das";
- reg = <0x70000c00 0x80>;
- };
-
- tegra_ac97: ac97 {
- compatible = "nvidia,tegra20-ac97";
- reg = <0x70002000 0x200>;
- interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 12>;
- clocks = <&tegra_car TEGRA20_CLK_AC97>;
- status = "disabled";
- };
-
- tegra_i2s1: i2s@70002800 {
- compatible = "nvidia,tegra20-i2s";
- reg = <0x70002800 0x200>;
- interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 2>;
- clocks = <&tegra_car TEGRA20_CLK_I2S1>;
- status = "disabled";
- };
-
- tegra_i2s2: i2s@70002a00 {
- compatible = "nvidia,tegra20-i2s";
- reg = <0x70002a00 0x200>;
- interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 1>;
- clocks = <&tegra_car TEGRA20_CLK_I2S2>;
- status = "disabled";
- };
-
- /*
- * There are two serial driver i.e. 8250 based simple serial
- * driver and APB DMA based serial driver for higher baudrate
- * and performace. To enable the 8250 based driver, the compatible
- * is "nvidia,tegra20-uart" and to enable the APB DMA based serial
- * driver, the comptible is "nvidia,tegra20-hsuart".
- */
- uarta: serial@70006000 {
- compatible = "nvidia,tegra20-uart";
- reg = <0x70006000 0x40>;
- reg-shift = <2>;
- interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 8>;
- clocks = <&tegra_car TEGRA20_CLK_UARTA>;
- status = "disabled";
- };
-
- uartb: serial@70006040 {
- compatible = "nvidia,tegra20-uart";
- reg = <0x70006040 0x40>;
- reg-shift = <2>;
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 9>;
- clocks = <&tegra_car TEGRA20_CLK_UARTB>;
- status = "disabled";
- };
-
- uartc: serial@70006200 {
- compatible = "nvidia,tegra20-uart";
- reg = <0x70006200 0x100>;
- reg-shift = <2>;
- interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 10>;
- clocks = <&tegra_car TEGRA20_CLK_UARTC>;
- status = "disabled";
- };
-
- uartd: serial@70006300 {
- compatible = "nvidia,tegra20-uart";
- reg = <0x70006300 0x100>;
- reg-shift = <2>;
- interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 19>;
- clocks = <&tegra_car TEGRA20_CLK_UARTD>;
- status = "disabled";
- };
-
- uarte: serial@70006400 {
- compatible = "nvidia,tegra20-uart";
- reg = <0x70006400 0x100>;
- reg-shift = <2>;
- interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 20>;
- clocks = <&tegra_car TEGRA20_CLK_UARTE>;
- status = "disabled";
- };
-
- pwm: pwm {
- compatible = "nvidia,tegra20-pwm";
- reg = <0x7000a000 0x100>;
- #pwm-cells = <2>;
- clocks = <&tegra_car TEGRA20_CLK_PWM>;
- status = "disabled";
- };
-
- rtc {
- compatible = "nvidia,tegra20-rtc";
- reg = <0x7000e000 0x100>;
- interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&tegra_car TEGRA20_CLK_RTC>;
- };
-
- i2c@7000c000 {
- compatible = "nvidia,tegra20-i2c";
- reg = <0x7000c000 0x100>;
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&tegra_car TEGRA20_CLK_I2C1>,
- <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
- clock-names = "div-clk", "fast-clk";
- status = "disabled";
- };
-
- spi@7000c380 {
- compatible = "nvidia,tegra20-sflash";
- reg = <0x7000c380 0x80>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 11>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&tegra_car TEGRA20_CLK_SPI>;
- status = "disabled";
- };
-
- i2c@7000c400 {
- compatible = "nvidia,tegra20-i2c";
- reg = <0x7000c400 0x100>;
- interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&tegra_car TEGRA20_CLK_I2C2>,
- <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
- clock-names = "div-clk", "fast-clk";
- status = "disabled";
- };
-
- i2c@7000c500 {
- compatible = "nvidia,tegra20-i2c";
- reg = <0x7000c500 0x100>;
- interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&tegra_car TEGRA20_CLK_I2C3>,
- <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
- clock-names = "div-clk", "fast-clk";
- status = "disabled";
- };
-
- i2c@7000d000 {
- compatible = "nvidia,tegra20-i2c-dvc";
- reg = <0x7000d000 0x200>;
- interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&tegra_car TEGRA20_CLK_DVC>,
- <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
- clock-names = "div-clk", "fast-clk";
- status = "disabled";
- };
-
- spi@7000d400 {
- compatible = "nvidia,tegra20-slink";
- reg = <0x7000d400 0x200>;
- interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 15>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&tegra_car TEGRA20_CLK_SBC1>;
- status = "disabled";
- };
-
- spi@7000d600 {
- compatible = "nvidia,tegra20-slink";
- reg = <0x7000d600 0x200>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 16>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&tegra_car TEGRA20_CLK_SBC2>;
- status = "disabled";
- };
-
- spi@7000d800 {
- compatible = "nvidia,tegra20-slink";
- reg = <0x7000d800 0x200>;
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 17>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&tegra_car TEGRA20_CLK_SBC3>;
- status = "disabled";
- };
-
- spi@7000da00 {
- compatible = "nvidia,tegra20-slink";
- reg = <0x7000da00 0x200>;
- interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 18>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&tegra_car TEGRA20_CLK_SBC4>;
- status = "disabled";
- };
-
- kbc {
- compatible = "nvidia,tegra20-kbc";
- reg = <0x7000e200 0x100>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&tegra_car TEGRA20_CLK_KBC>;
- status = "disabled";
- };
-
- pmc {
- compatible = "nvidia,tegra20-pmc";
- reg = <0x7000e400 0x400>;
- clocks = <&tegra_car TEGRA20_CLK_PCLK>, <&clk32k_in>;
- clock-names = "pclk", "clk32k_in";
- };
-
- memory-controller@7000f000 {
- compatible = "nvidia,tegra20-mc";
- reg = <0x7000f000 0x024
- 0x7000f03c 0x3c4>;
- interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- iommu {
- compatible = "nvidia,tegra20-gart";
- reg = <0x7000f024 0x00000018 /* controller registers */
- 0x58000000 0x02000000>; /* GART aperture */
- };
-
- memory-controller@7000f400 {
- compatible = "nvidia,tegra20-emc";
- reg = <0x7000f400 0x200>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- pcie-controller {
- compatible = "nvidia,tegra20-pcie";
- device_type = "pci";
- reg = <0x80003000 0x00000800 /* PADS registers */
- 0x80003800 0x00000200 /* AFI registers */
- 0x90000000 0x10000000>; /* configuration space */
- reg-names = "pads", "afi", "cs";
- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH /* controller interrupt */
- GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
- interrupt-names = "intr", "msi";
-
- bus-range = <0x00 0xff>;
- #address-cells = <3>;
- #size-cells = <2>;
-
- ranges = <0x82000000 0 0x80000000 0x80000000 0 0x00001000 /* port 0 registers */
- 0x82000000 0 0x80001000 0x80001000 0 0x00001000 /* port 1 registers */
- 0x81000000 0 0 0x82000000 0 0x00010000 /* downstream I/O */
- 0x82000000 0 0xa0000000 0xa0000000 0 0x08000000 /* non-prefetchable memory */
- 0xc2000000 0 0xa8000000 0xa8000000 0 0x18000000>; /* prefetchable memory */
-
- clocks = <&tegra_car TEGRA20_CLK_PEX>,
- <&tegra_car TEGRA20_CLK_AFI>,
- <&tegra_car TEGRA20_CLK_PCIE_XCLK>,
- <&tegra_car TEGRA20_CLK_PLL_E>;
- clock-names = "pex", "afi", "pcie_xclk", "pll_e";
- status = "disabled";
-
- pci@1,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x80000000 0 0x1000>;
- reg = <0x000800 0 0 0 0>;
- status = "disabled";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- nvidia,num-lanes = <2>;
- };
-
- pci@2,0 {
- device_type = "pci";
- assigned-addresses = <0x82001000 0 0x80001000 0 0x1000>;
- reg = <0x001000 0 0 0 0>;
- status = "disabled";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- nvidia,num-lanes = <2>;
- };
- };
-
- usb@c5000000 {
- compatible = "nvidia,tegra20-ehci", "usb-ehci";
- reg = <0xc5000000 0x4000>;
- interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
- phy_type = "utmi";
- nvidia,has-legacy-mode;
- clocks = <&tegra_car TEGRA20_CLK_USBD>;
- nvidia,needs-double-reset;
- nvidia,phy = <&phy1>;
- status = "disabled";
- };
-
- phy1: usb-phy@c5000000 {
- compatible = "nvidia,tegra20-usb-phy";
- reg = <0xc5000000 0x4000 0xc5000000 0x4000>;
- phy_type = "utmi";
- clocks = <&tegra_car TEGRA20_CLK_USBD>,
- <&tegra_car TEGRA20_CLK_PLL_U>,
- <&tegra_car TEGRA20_CLK_CLK_M>,
- <&tegra_car TEGRA20_CLK_USBD>;
- clock-names = "reg", "pll_u", "timer", "utmi-pads";
- nvidia,has-legacy-mode;
- nvidia,hssync-start-delay = <9>;
- nvidia,idle-wait-delay = <17>;
- nvidia,elastic-limit = <16>;
- nvidia,term-range-adj = <6>;
- nvidia,xcvr-setup = <9>;
- nvidia,xcvr-lsfslew = <1>;
- nvidia,xcvr-lsrslew = <1>;
- status = "disabled";
- };
-
- usb@c5004000 {
- compatible = "nvidia,tegra20-ehci", "usb-ehci";
- reg = <0xc5004000 0x4000>;
- interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- phy_type = "ulpi";
- clocks = <&tegra_car TEGRA20_CLK_USB2>;
- nvidia,phy = <&phy2>;
- status = "disabled";
- };
-
- phy2: usb-phy@c5004000 {
- compatible = "nvidia,tegra20-usb-phy";
- reg = <0xc5004000 0x4000>;
- phy_type = "ulpi";
- clocks = <&tegra_car TEGRA20_CLK_USB2>,
- <&tegra_car TEGRA20_CLK_PLL_U>,
- <&tegra_car TEGRA20_CLK_CDEV2>;
- clock-names = "reg", "pll_u", "ulpi-link";
- status = "disabled";
- };
-
- usb@c5008000 {
- compatible = "nvidia,tegra20-ehci", "usb-ehci";
- reg = <0xc5008000 0x4000>;
- interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- phy_type = "utmi";
- clocks = <&tegra_car TEGRA20_CLK_USB3>;
- nvidia,phy = <&phy3>;
- status = "disabled";
- };
-
- phy3: usb-phy@c5008000 {
- compatible = "nvidia,tegra20-usb-phy";
- reg = <0xc5008000 0x4000 0xc5000000 0x4000>;
- phy_type = "utmi";
- clocks = <&tegra_car TEGRA20_CLK_USB3>,
- <&tegra_car TEGRA20_CLK_PLL_U>,
- <&tegra_car TEGRA20_CLK_CLK_M>,
- <&tegra_car TEGRA20_CLK_USBD>;
- clock-names = "reg", "pll_u", "timer", "utmi-pads";
- nvidia,hssync-start-delay = <9>;
- nvidia,idle-wait-delay = <17>;
- nvidia,elastic-limit = <16>;
- nvidia,term-range-adj = <6>;
- nvidia,xcvr-setup = <9>;
- nvidia,xcvr-lsfslew = <2>;
- nvidia,xcvr-lsrslew = <2>;
- status = "disabled";
- };
-
- sdhci@c8000000 {
- compatible = "nvidia,tegra20-sdhci";
- reg = <0xc8000000 0x200>;
- interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
- status = "disabled";
- };
-
- sdhci@c8000200 {
- compatible = "nvidia,tegra20-sdhci";
- reg = <0xc8000200 0x200>;
- interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&tegra_car TEGRA20_CLK_SDMMC2>;
- status = "disabled";
- };
-
- sdhci@c8000400 {
- compatible = "nvidia,tegra20-sdhci";
- reg = <0xc8000400 0x200>;
- interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&tegra_car TEGRA20_CLK_SDMMC3>;
- status = "disabled";
- };
-
- sdhci@c8000600 {
- compatible = "nvidia,tegra20-sdhci";
- reg = <0xc8000600 0x200>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&tegra_car TEGRA20_CLK_SDMMC4>;
- status = "disabled";
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- reg = <0>;
- };
-
- cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- reg = <1>;
- };
- };
-
- pmu {
- compatible = "arm,cortex-a9-pmu";
- interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
- };
-};
+#include <arm/tegra20.dtsi>
--
1.9.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 12/12] ARM: dove: Use upstream dtsi file
2014-04-28 7:45 [PATCH] Add Linux dts files and use them Sascha Hauer
` (9 preceding siblings ...)
2014-04-28 7:46 ` [PATCH 11/12] ARM: Tegra20: Use upstream dtsi files Sascha Hauer
@ 2014-04-28 7:46 ` Sascha Hauer
2014-04-28 17:36 ` [PATCH] fixup! " Sebastian Hesselbarth
2014-05-05 8:20 ` [PATCH] Add Linux dts files and use them Sascha Hauer
11 siblings, 1 reply; 23+ messages in thread
From: Sascha Hauer @ 2014-04-28 7:46 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/dts/dove.dtsi | 627 +------------------------------------------------
1 file changed, 1 insertion(+), 626 deletions(-)
diff --git a/arch/arm/dts/dove.dtsi b/arch/arm/dts/dove.dtsi
index 2b76524..2074fc5 100644
--- a/arch/arm/dts/dove.dtsi
+++ b/arch/arm/dts/dove.dtsi
@@ -1,626 +1 @@
-/include/ "skeleton.dtsi"
-
-#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
-
-/ {
- compatible = "marvell,dove";
- model = "Marvell Armada 88AP510 SoC";
- interrupt-parent = <&intc>;
-
- aliases {
- gpio0 = &gpio0;
- gpio1 = &gpio1;
- gpio2 = &gpio2;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- compatible = "marvell,pj4a", "marvell,sheeva-v7";
- device_type = "cpu";
- next-level-cache = <&l2>;
- reg = <0>;
- };
- };
-
- l2: l2-cache {
- compatible = "marvell,tauros2-cache";
- marvell,tauros2-cache-features = <0>;
- };
-
- mbus {
- compatible = "marvell,dove-mbus", "marvell,mbus", "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
- controller = <&mbusc>;
- pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256M MEM space */
- pcie-io-aperture = <0xf2000000 0x00200000>; /* 2M I/O space */
-
- ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x0100000 /* MBUS regs 1M */
- MBUS_ID(0xf0, 0x02) 0 0xf1800000 0x1000000 /* AXI regs 16M */
- MBUS_ID(0x01, 0xfd) 0 0xf8000000 0x8000000 /* BootROM 128M */
- MBUS_ID(0x03, 0x01) 0 0xc8000000 0x0100000 /* CESA SRAM 1M */
- MBUS_ID(0x0d, 0x00) 0 0xf0000000 0x0100000>; /* PMU SRAM 1M */
-
- pcie: pcie-controller {
- compatible = "marvell,dove-pcie";
- status = "disabled";
- device_type = "pci";
- #address-cells = <3>;
- #size-cells = <2>;
-
- msi-parent = <&intc>;
- bus-range = <0x00 0xff>;
-
- ranges = <0x82000000 0x0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x2000
- 0x82000000 0x0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x2000
- 0x82000000 0x1 0x0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 Mem */
- 0x81000000 0x1 0x0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 I/O */
- 0x82000000 0x2 0x0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 Mem */
- 0x81000000 0x2 0x0 MBUS_ID(0x08, 0xe0) 0 1 0>; /* Port 1.0 I/O */
-
- pcie-port@0 {
- device_type = "pci";
- status = "disabled";
- assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
- reg = <0x0800 0 0 0 0>;
- clocks = <&gate_clk 4>;
- marvell,pcie-port = <0>;
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
- 0x81000000 0 0 0x81000000 0x1 0 1 0>;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &intc 16>;
- };
-
- pcie-port@1 {
- device_type = "pci";
- status = "disabled";
- assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
- reg = <0x1000 0 0 0 0>;
- clocks = <&gate_clk 5>;
- marvell,pcie-port = <1>;
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
- 0x81000000 0 0 0x81000000 0x2 0 1 0>;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &intc 18>;
- };
- };
-
- internal-regs {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x00000000 MBUS_ID(0xf0, 0x01) 0 0x0100000 /* MBUS regs 1M */
- 0x00800000 MBUS_ID(0xf0, 0x02) 0 0x1000000 /* AXI regs 16M */
- 0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800 /* CESA SRAM 2k */
- 0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU SRAM 2k */
-
- spi0: spi-ctrl@10600 {
- compatible = "marvell,orion-spi";
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- interrupts = <6>;
- reg = <0x10600 0x28>;
- clocks = <&core_clk 0>;
- pinctrl-0 = <&pmx_spi0>;
- pinctrl-names = "default";
- status = "disabled";
- };
-
- i2c0: i2c-ctrl@11000 {
- compatible = "marvell,mv64xxx-i2c";
- reg = <0x11000 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <11>;
- clock-frequency = <400000>;
- timeout-ms = <1000>;
- clocks = <&core_clk 0>;
- status = "disabled";
- };
-
- uart0: serial@12000 {
- compatible = "ns16550a";
- reg = <0x12000 0x100>;
- reg-shift = <2>;
- interrupts = <7>;
- clocks = <&core_clk 0>;
- status = "disabled";
- };
-
- uart1: serial@12100 {
- compatible = "ns16550a";
- reg = <0x12100 0x100>;
- reg-shift = <2>;
- interrupts = <8>;
- clocks = <&core_clk 0>;
- pinctrl-0 = <&pmx_uart1>;
- pinctrl-names = "default";
- status = "disabled";
- };
-
- uart2: serial@12200 {
- compatible = "ns16550a";
- reg = <0x12000 0x100>;
- reg-shift = <2>;
- interrupts = <9>;
- clocks = <&core_clk 0>;
- status = "disabled";
- };
-
- uart3: serial@12300 {
- compatible = "ns16550a";
- reg = <0x12100 0x100>;
- reg-shift = <2>;
- interrupts = <10>;
- clocks = <&core_clk 0>;
- status = "disabled";
- };
-
- spi1: spi-ctrl@14600 {
- compatible = "marvell,orion-spi";
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- interrupts = <5>;
- reg = <0x14600 0x28>;
- clocks = <&core_clk 0>;
- status = "disabled";
- };
-
- mbusc: mbus-ctrl@20000 {
- compatible = "marvell,mbus-controller";
- reg = <0x20000 0x80>, <0x800100 0x8>;
- };
-
- bridge_intc: bridge-interrupt-ctrl@20110 {
- compatible = "marvell,orion-bridge-intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0x20110 0x8>;
- interrupts = <0>;
- marvell,#interrupts = <5>;
- };
-
- intc: main-interrupt-ctrl@20200 {
- compatible = "marvell,orion-intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0x20200 0x10>, <0x20210 0x10>;
- };
-
- timer: timer@20300 {
- compatible = "marvell,orion-timer";
- reg = <0x20300 0x20>;
- interrupt-parent = <&bridge_intc>;
- interrupts = <1>, <2>;
- clocks = <&core_clk 0>;
- };
-
- crypto: crypto-engine@30000 {
- compatible = "marvell,orion-crypto";
- reg = <0x30000 0x10000>,
- <0xffffe000 0x800>;
- reg-names = "regs", "sram";
- interrupts = <31>;
- clocks = <&gate_clk 15>;
- status = "okay";
- };
-
- ehci0: usb-host@50000 {
- compatible = "marvell,orion-ehci";
- reg = <0x50000 0x1000>;
- interrupts = <24>;
- clocks = <&gate_clk 0>;
- status = "okay";
- };
-
- ehci1: usb-host@51000 {
- compatible = "marvell,orion-ehci";
- reg = <0x51000 0x1000>;
- interrupts = <25>;
- clocks = <&gate_clk 1>;
- status = "okay";
- };
-
- xor0: dma-engine@60800 {
- compatible = "marvell,orion-xor";
- reg = <0x60800 0x100
- 0x60a00 0x100>;
- clocks = <&gate_clk 23>;
- status = "okay";
-
- channel0 {
- interrupts = <39>;
- dmacap,memcpy;
- dmacap,xor;
- };
-
- channel1 {
- interrupts = <40>;
- dmacap,memcpy;
- dmacap,xor;
- };
- };
-
- xor1: dma-engine@60900 {
- compatible = "marvell,orion-xor";
- reg = <0x60900 0x100
- 0x60b00 0x100>;
- clocks = <&gate_clk 24>;
- status = "okay";
-
- channel0 {
- interrupts = <42>;
- dmacap,memcpy;
- dmacap,xor;
- };
-
- channel1 {
- interrupts = <43>;
- dmacap,memcpy;
- dmacap,xor;
- };
- };
-
- sdio1: sdio-host@90000 {
- compatible = "marvell,dove-sdhci";
- reg = <0x90000 0x100>;
- interrupts = <36>, <38>;
- clocks = <&gate_clk 9>;
- pinctrl-0 = <&pmx_sdio1>;
- pinctrl-names = "default";
- status = "disabled";
- };
-
- eth: ethernet-ctrl@72000 {
- compatible = "marvell,orion-eth";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x72000 0x4000>;
- clocks = <&gate_clk 2>;
- marvell,tx-checksum-limit = <1600>;
- status = "disabled";
-
- ethernet-port@0 {
- compatible = "marvell,orion-eth-port";
- reg = <0>;
- interrupts = <29>;
- /* overwrite MAC address in bootloader */
- local-mac-address = [00 00 00 00 00 00];
- phy-handle = <ðphy>;
- };
- };
-
- mdio: mdio-bus@72004 {
- compatible = "marvell,orion-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x72004 0x84>;
- interrupts = <30>;
- clocks = <&gate_clk 2>;
- status = "disabled";
-
- ethphy: ethernet-phy {
- /* set phy address in board file */
- };
- };
-
- sdio0: sdio-host@92000 {
- compatible = "marvell,dove-sdhci";
- reg = <0x92000 0x100>;
- interrupts = <35>, <37>;
- clocks = <&gate_clk 8>;
- pinctrl-0 = <&pmx_sdio0>;
- pinctrl-names = "default";
- status = "disabled";
- };
-
- sata0: sata-host@a0000 {
- compatible = "marvell,orion-sata";
- reg = <0xa0000 0x2400>;
- interrupts = <62>;
- clocks = <&gate_clk 3>;
- phys = <&sata_phy0>;
- phy-names = "port0";
- nr-ports = <1>;
- status = "disabled";
- };
-
- sata_phy0: sata-phy@a2000 {
- compatible = "marvell,mvebu-sata-phy";
- reg = <0xa2000 0x0334>;
- clocks = <&gate_clk 3>;
- clock-names = "sata";
- #phy-cells = <0>;
- status = "ok";
- };
-
- audio0: audio-controller@b0000 {
- compatible = "marvell,dove-audio";
- reg = <0xb0000 0x2210>;
- interrupts = <19>, <20>;
- clocks = <&gate_clk 12>;
- clock-names = "internal";
- status = "disabled";
- };
-
- audio1: audio-controller@b4000 {
- compatible = "marvell,dove-audio";
- reg = <0xb4000 0x2210>;
- interrupts = <21>, <22>;
- clocks = <&gate_clk 13>;
- clock-names = "internal";
- status = "disabled";
- };
-
- thermal: thermal-diode@d001c {
- compatible = "marvell,dove-thermal";
- reg = <0xd001c 0x0c>, <0xd005c 0x08>;
- };
-
- gate_clk: clock-gating-ctrl@d0038 {
- compatible = "marvell,dove-gating-clock";
- reg = <0xd0038 0x4>;
- clocks = <&core_clk 0>;
- #clock-cells = <1>;
- };
-
- pmu_intc: pmu-interrupt-ctrl@d0050 {
- compatible = "marvell,dove-pmu-intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0xd0050 0x8>;
- interrupts = <33>;
- marvell,#interrupts = <7>;
- };
-
- pinctrl: pin-ctrl@d0200 {
- compatible = "marvell,dove-pinctrl";
- reg = <0xd0200 0x10>;
- clocks = <&gate_clk 22>;
-
- pmx_gpio_0: pmx-gpio-0 {
- marvell,pins = "mpp0";
- marvell,function = "gpio";
- };
-
- pmx_gpio_1: pmx-gpio-1 {
- marvell,pins = "mpp1";
- marvell,function = "gpio";
- };
-
- pmx_gpio_2: pmx-gpio-2 {
- marvell,pins = "mpp2";
- marvell,function = "gpio";
- };
-
- pmx_gpio_3: pmx-gpio-3 {
- marvell,pins = "mpp3";
- marvell,function = "gpio";
- };
-
- pmx_gpio_4: pmx-gpio-4 {
- marvell,pins = "mpp4";
- marvell,function = "gpio";
- };
-
- pmx_gpio_5: pmx-gpio-5 {
- marvell,pins = "mpp5";
- marvell,function = "gpio";
- };
-
- pmx_gpio_6: pmx-gpio-6 {
- marvell,pins = "mpp6";
- marvell,function = "gpio";
- };
-
- pmx_gpio_7: pmx-gpio-7 {
- marvell,pins = "mpp7";
- marvell,function = "gpio";
- };
-
- pmx_gpio_8: pmx-gpio-8 {
- marvell,pins = "mpp8";
- marvell,function = "gpio";
- };
-
- pmx_gpio_9: pmx-gpio-9 {
- marvell,pins = "mpp9";
- marvell,function = "gpio";
- };
-
- pmx_gpio_10: pmx-gpio-10 {
- marvell,pins = "mpp10";
- marvell,function = "gpio";
- };
-
- pmx_gpio_11: pmx-gpio-11 {
- marvell,pins = "mpp11";
- marvell,function = "gpio";
- };
-
- pmx_gpio_12: pmx-gpio-12 {
- marvell,pins = "mpp12";
- marvell,function = "gpio";
- };
-
- pmx_gpio_13: pmx-gpio-13 {
- marvell,pins = "mpp13";
- marvell,function = "gpio";
- };
-
- pmx_audio1_extclk: pmx-audio1-extclk {
- marvell,pins = "mpp13";
- marvell,function = "audio1";
- };
-
- pmx_gpio_14: pmx-gpio-14 {
- marvell,pins = "mpp14";
- marvell,function = "gpio";
- };
-
- pmx_gpio_15: pmx-gpio-15 {
- marvell,pins = "mpp15";
- marvell,function = "gpio";
- };
-
- pmx_gpio_16: pmx-gpio-16 {
- marvell,pins = "mpp16";
- marvell,function = "gpio";
- };
-
- pmx_gpio_17: pmx-gpio-17 {
- marvell,pins = "mpp17";
- marvell,function = "gpio";
- };
-
- pmx_gpio_18: pmx-gpio-18 {
- marvell,pins = "mpp18";
- marvell,function = "gpio";
- };
-
- pmx_gpio_19: pmx-gpio-19 {
- marvell,pins = "mpp19";
- marvell,function = "gpio";
- };
-
- pmx_gpio_20: pmx-gpio-20 {
- marvell,pins = "mpp20";
- marvell,function = "gpio";
- };
-
- pmx_gpio_21: pmx-gpio-21 {
- marvell,pins = "mpp21";
- marvell,function = "gpio";
- };
-
- pmx_camera: pmx-camera {
- marvell,pins = "mpp_camera";
- marvell,function = "camera";
- };
-
- pmx_camera_gpio: pmx-camera-gpio {
- marvell,pins = "mpp_camera";
- marvell,function = "gpio";
- };
-
- pmx_sdio0: pmx-sdio0 {
- marvell,pins = "mpp_sdio0";
- marvell,function = "sdio0";
- };
-
- pmx_sdio0_gpio: pmx-sdio0-gpio {
- marvell,pins = "mpp_sdio0";
- marvell,function = "gpio";
- };
-
- pmx_sdio1: pmx-sdio1 {
- marvell,pins = "mpp_sdio1";
- marvell,function = "sdio1";
- };
-
- pmx_sdio1_gpio: pmx-sdio1-gpio {
- marvell,pins = "mpp_sdio1";
- marvell,function = "gpio";
- };
-
- pmx_audio1_gpio: pmx-audio1-gpio {
- marvell,pins = "mpp_audio1";
- marvell,function = "gpio";
- };
-
- pmx_audio1_i2s1_spdifo: pmx-audio1-i2s1-spdifo {
- marvell,pins = "mpp_audio1";
- marvell,function = "i2s1/spdifo";
- };
-
- pmx_spi0: pmx-spi0 {
- marvell,pins = "mpp_spi0";
- marvell,function = "spi0";
- };
-
- pmx_spi0_gpio: pmx-spi0-gpio {
- marvell,pins = "mpp_spi0";
- marvell,function = "gpio";
- };
-
- pmx_uart1: pmx-uart1 {
- marvell,pins = "mpp_uart1";
- marvell,function = "uart1";
- };
-
- pmx_uart1_gpio: pmx-uart1-gpio {
- marvell,pins = "mpp_uart1";
- marvell,function = "gpio";
- };
-
- pmx_nand: pmx-nand {
- marvell,pins = "mpp_nand";
- marvell,function = "nand";
- };
-
- pmx_nand_gpo: pmx-nand-gpo {
- marvell,pins = "mpp_nand";
- marvell,function = "gpo";
- };
- };
-
- core_clk: core-clocks@d0214 {
- compatible = "marvell,dove-core-clock";
- reg = <0xd0214 0x4>;
- #clock-cells = <1>;
- };
-
- gpio0: gpio-ctrl@d0400 {
- compatible = "marvell,orion-gpio";
- #gpio-cells = <2>;
- gpio-controller;
- reg = <0xd0400 0x20>;
- ngpios = <32>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <12>, <13>, <14>, <60>;
- };
-
- gpio1: gpio-ctrl@d0420 {
- compatible = "marvell,orion-gpio";
- #gpio-cells = <2>;
- gpio-controller;
- reg = <0xd0420 0x20>;
- ngpios = <32>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <61>;
- };
-
- rtc: real-time-clock@d8500 {
- compatible = "marvell,orion-rtc";
- reg = <0xd8500 0x20>;
- interrupt-parent = <&pmu_intc>;
- interrupts = <5>;
- };
-
- gpio2: gpio-ctrl@e8400 {
- compatible = "marvell,orion-gpio";
- #gpio-cells = <2>;
- gpio-controller;
- reg = <0xe8400 0x0c>;
- ngpios = <8>;
- };
- };
- };
-};
+#include <arm/dove.dtsi>
--
1.9.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH] fixup! ARM: dove: Use upstream dtsi file
2014-04-28 7:46 ` [PATCH 12/12] ARM: dove: Use upstream dtsi file Sascha Hauer
@ 2014-04-28 17:36 ` Sebastian Hesselbarth
2014-04-28 18:40 ` Sascha Hauer
0 siblings, 1 reply; 23+ messages in thread
From: Sebastian Hesselbarth @ 2014-04-28 17:36 UTC (permalink / raw)
To: Sebastian Hesselbarth; +Cc: barebox
Sascha,
thanks _a lot_ for doing this. It saves me from importing the same
for the other SoCs. Anyway, I'd even go further and fixup the Dove
patch with this one here.
Feel free to squash this into
09015ae52c18 ("ARM: dove: Use upstream dtsi file")
and add my
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: barebox@lists.infradead.org
---
arch/arm/dts/dove-cubox-bb.dts | 2 +-
arch/arm/dts/dove-cubox.dts | 136 -----------------------------------------
arch/arm/dts/dove.dtsi | 1 -
3 files changed, 1 insertion(+), 138 deletions(-)
delete mode 100644 arch/arm/dts/dove-cubox.dts
delete mode 100644 arch/arm/dts/dove.dtsi
diff --git a/arch/arm/dts/dove-cubox-bb.dts b/arch/arm/dts/dove-cubox-bb.dts
index 3d1e5b4fa622..f7ad55c4e794 100644
--- a/arch/arm/dts/dove-cubox-bb.dts
+++ b/arch/arm/dts/dove-cubox-bb.dts
@@ -3,7 +3,7 @@
* Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
*/
-#include "dove-cubox.dts"
+#include "arm/dove-cubox.dts"
/ {
chosen {
diff --git a/arch/arm/dts/dove-cubox.dts b/arch/arm/dts/dove-cubox.dts
deleted file mode 100644
index 7a70f4ca502a..000000000000
--- a/arch/arm/dts/dove-cubox.dts
+++ /dev/null
@@ -1,136 +0,0 @@
-/dts-v1/;
-
-#include "dove.dtsi"
-
-/ {
- model = "SolidRun CuBox";
- compatible = "solidrun,cubox", "marvell,dove";
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x40000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk";
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&pmx_gpio_18>;
- pinctrl-names = "default";
-
- power {
- label = "Power";
- gpios = <&gpio0 18 1>;
- default-state = "keep";
- };
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb_power: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "USB Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 1 0>;
- pinctrl-0 = <&pmx_gpio_1>;
- pinctrl-names = "default";
- };
- };
-
- clocks {
- /* 25MHz reference crystal */
- ref25: oscillator {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <25000000>;
- };
- };
-
- ir_recv: ir-receiver {
- compatible = "gpio-ir-receiver";
- gpios = <&gpio0 19 1>;
- pinctrl-0 = <&pmx_gpio_19>;
- pinctrl-names = "default";
- };
-};
-
-&uart0 { status = "okay"; };
-&sata0 { status = "okay"; };
-&mdio { status = "okay"; };
-ð { status = "okay"; };
-
-ðphy {
- compatible = "marvell,88e1310";
- reg = <1>;
-};
-
-&i2c0 {
- status = "okay";
- clock-frequency = <100000>;
-
- si5351: clock-generator {
- compatible = "silabs,si5351a-msop";
- reg = <0x60>;
- #address-cells = <1>;
- #size-cells = <0>;
- #clock-cells = <1>;
-
- /* connect xtal input to 25MHz reference */
- clocks = <&ref25>;
-
- /* connect xtal input as source of pll0 and pll1 */
- silabs,pll-source = <0 0>, <1 0>;
-
- clkout0 {
- reg = <0>;
- silabs,drive-strength = <8>;
- silabs,multisynth-source = <0>;
- silabs,clock-source = <0>;
- silabs,pll-master;
- };
-
- clkout2 {
- reg = <2>;
- silabs,drive-strength = <8>;
- silabs,multisynth-source = <1>;
- silabs,clock-source = <0>;
- silabs,pll-master;
- };
- };
-};
-
-&sdio0 {
- status = "okay";
- /* sdio0 card detect is connected to wrong pin on CuBox */
- cd-gpios = <&gpio0 12 1>;
- pinctrl-0 = <&pmx_sdio0 &pmx_gpio_12>;
-};
-
-&spi0 {
- status = "okay";
-
- /* spi0.0: 4M Flash Winbond W25Q32BV */
- spi-flash@0 {
- compatible = "st,w25q32";
- spi-max-frequency = <20000000>;
- reg = <0>;
- };
-};
-
-&audio1 {
- status = "okay";
- clocks = <&gate_clk 13>, <&si5351 2>;
- clock-names = "internal", "extclk";
- pinctrl-0 = <&pmx_audio1_i2s1_spdifo &pmx_audio1_extclk>;
- pinctrl-names = "default";
-};
diff --git a/arch/arm/dts/dove.dtsi b/arch/arm/dts/dove.dtsi
deleted file mode 100644
index 2074fc56a3fe..000000000000
--- a/arch/arm/dts/dove.dtsi
+++ /dev/null
@@ -1 +0,0 @@
-#include <arm/dove.dtsi>
--
1.9.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH] fixup! ARM: dove: Use upstream dtsi file
2014-04-28 17:36 ` [PATCH] fixup! " Sebastian Hesselbarth
@ 2014-04-28 18:40 ` Sascha Hauer
0 siblings, 0 replies; 23+ messages in thread
From: Sascha Hauer @ 2014-04-28 18:40 UTC (permalink / raw)
To: Sebastian Hesselbarth; +Cc: barebox
On Mon, Apr 28, 2014 at 07:36:13PM +0200, Sebastian Hesselbarth wrote:
> Sascha,
>
> thanks _a lot_ for doing this. It saves me from importing the same
> for the other SoCs. Anyway, I'd even go further and fixup the Dove
> patch with this one here.
>
> Feel free to squash this into
>
> 09015ae52c18 ("ARM: dove: Use upstream dtsi file")
>
> and add my
>
> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
I'll do that. Thanks for testing.
Sascha
>
> ---
> Cc: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: barebox@lists.infradead.org
> ---
> arch/arm/dts/dove-cubox-bb.dts | 2 +-
> arch/arm/dts/dove-cubox.dts | 136 -----------------------------------------
> arch/arm/dts/dove.dtsi | 1 -
> 3 files changed, 1 insertion(+), 138 deletions(-)
> delete mode 100644 arch/arm/dts/dove-cubox.dts
> delete mode 100644 arch/arm/dts/dove.dtsi
>
> diff --git a/arch/arm/dts/dove-cubox-bb.dts b/arch/arm/dts/dove-cubox-bb.dts
> index 3d1e5b4fa622..f7ad55c4e794 100644
> --- a/arch/arm/dts/dove-cubox-bb.dts
> +++ b/arch/arm/dts/dove-cubox-bb.dts
> @@ -3,7 +3,7 @@
> * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
> */
>
> -#include "dove-cubox.dts"
> +#include "arm/dove-cubox.dts"
>
> / {
> chosen {
> diff --git a/arch/arm/dts/dove-cubox.dts b/arch/arm/dts/dove-cubox.dts
> deleted file mode 100644
> index 7a70f4ca502a..000000000000
> --- a/arch/arm/dts/dove-cubox.dts
> +++ /dev/null
> @@ -1,136 +0,0 @@
> -/dts-v1/;
> -
> -#include "dove.dtsi"
> -
> -/ {
> - model = "SolidRun CuBox";
> - compatible = "solidrun,cubox", "marvell,dove";
> -
> - memory {
> - device_type = "memory";
> - reg = <0x00000000 0x40000000>;
> - };
> -
> - chosen {
> - bootargs = "console=ttyS0,115200n8 earlyprintk";
> - };
> -
> - leds {
> - compatible = "gpio-leds";
> - pinctrl-0 = <&pmx_gpio_18>;
> - pinctrl-names = "default";
> -
> - power {
> - label = "Power";
> - gpios = <&gpio0 18 1>;
> - default-state = "keep";
> - };
> - };
> -
> - regulators {
> - compatible = "simple-bus";
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - usb_power: regulator@1 {
> - compatible = "regulator-fixed";
> - reg = <1>;
> - regulator-name = "USB Power";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - enable-active-high;
> - regulator-always-on;
> - regulator-boot-on;
> - gpio = <&gpio0 1 0>;
> - pinctrl-0 = <&pmx_gpio_1>;
> - pinctrl-names = "default";
> - };
> - };
> -
> - clocks {
> - /* 25MHz reference crystal */
> - ref25: oscillator {
> - compatible = "fixed-clock";
> - #clock-cells = <0>;
> - clock-frequency = <25000000>;
> - };
> - };
> -
> - ir_recv: ir-receiver {
> - compatible = "gpio-ir-receiver";
> - gpios = <&gpio0 19 1>;
> - pinctrl-0 = <&pmx_gpio_19>;
> - pinctrl-names = "default";
> - };
> -};
> -
> -&uart0 { status = "okay"; };
> -&sata0 { status = "okay"; };
> -&mdio { status = "okay"; };
> -ð { status = "okay"; };
> -
> -ðphy {
> - compatible = "marvell,88e1310";
> - reg = <1>;
> -};
> -
> -&i2c0 {
> - status = "okay";
> - clock-frequency = <100000>;
> -
> - si5351: clock-generator {
> - compatible = "silabs,si5351a-msop";
> - reg = <0x60>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - #clock-cells = <1>;
> -
> - /* connect xtal input to 25MHz reference */
> - clocks = <&ref25>;
> -
> - /* connect xtal input as source of pll0 and pll1 */
> - silabs,pll-source = <0 0>, <1 0>;
> -
> - clkout0 {
> - reg = <0>;
> - silabs,drive-strength = <8>;
> - silabs,multisynth-source = <0>;
> - silabs,clock-source = <0>;
> - silabs,pll-master;
> - };
> -
> - clkout2 {
> - reg = <2>;
> - silabs,drive-strength = <8>;
> - silabs,multisynth-source = <1>;
> - silabs,clock-source = <0>;
> - silabs,pll-master;
> - };
> - };
> -};
> -
> -&sdio0 {
> - status = "okay";
> - /* sdio0 card detect is connected to wrong pin on CuBox */
> - cd-gpios = <&gpio0 12 1>;
> - pinctrl-0 = <&pmx_sdio0 &pmx_gpio_12>;
> -};
> -
> -&spi0 {
> - status = "okay";
> -
> - /* spi0.0: 4M Flash Winbond W25Q32BV */
> - spi-flash@0 {
> - compatible = "st,w25q32";
> - spi-max-frequency = <20000000>;
> - reg = <0>;
> - };
> -};
> -
> -&audio1 {
> - status = "okay";
> - clocks = <&gate_clk 13>, <&si5351 2>;
> - clock-names = "internal", "extclk";
> - pinctrl-0 = <&pmx_audio1_i2s1_spdifo &pmx_audio1_extclk>;
> - pinctrl-names = "default";
> -};
> diff --git a/arch/arm/dts/dove.dtsi b/arch/arm/dts/dove.dtsi
> deleted file mode 100644
> index 2074fc56a3fe..000000000000
> --- a/arch/arm/dts/dove.dtsi
> +++ /dev/null
> @@ -1 +0,0 @@
> -#include <arm/dove.dtsi>
> --
> 1.9.1
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH] Add Linux dts files and use them
2014-04-28 7:45 [PATCH] Add Linux dts files and use them Sascha Hauer
` (10 preceding siblings ...)
2014-04-28 7:46 ` [PATCH 12/12] ARM: dove: Use upstream dtsi file Sascha Hauer
@ 2014-05-05 8:20 ` Sascha Hauer
2014-05-05 15:57 ` Alexander Shiyan
11 siblings, 1 reply; 23+ messages in thread
From: Sascha Hauer @ 2014-05-05 8:20 UTC (permalink / raw)
To: barebox
Some updates how I intend to handle upstream dts changes in barebox.
- I will merge the latest upstream dts changes to barebox for each Linux
rc. Should dts changes introduce regressions this will at least give us
the Linux rc which introduced it
- I will always merge dts updates to barebox next, not to master. While
dts changes may be needed in master to fix regressions on one board,
they could also introduce new regressions on other boards. Should we
need dts changes to fix regressions in barebox master, we have to do
it using overlays in arch/*/dts/ until an upstream fix arrives in dts/
- I will not send the dts updates to the list, I'll just merge them to
barebox next some time after a new Linux rc arrived (As just happened
with 3.15-rc3)
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH] Add Linux dts files and use them
2014-05-05 8:20 ` [PATCH] Add Linux dts files and use them Sascha Hauer
@ 2014-05-05 15:57 ` Alexander Shiyan
2014-05-05 17:48 ` Sascha Hauer
0 siblings, 1 reply; 23+ messages in thread
From: Alexander Shiyan @ 2014-05-05 15:57 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox
Mon, 5 May 2014 10:20:49 +0200 от Sascha Hauer <s.hauer@pengutronix.de>:
> Some updates how I intend to handle upstream dts changes in barebox.
>
> - I will merge the latest upstream dts changes to barebox for each Linux
> rc. Should dts changes introduce regressions this will at least give us
> the Linux rc which introduced it
> - I will always merge dts updates to barebox next, not to master. While
> dts changes may be needed in master to fix regressions on one board,
> they could also introduce new regressions on other boards. Should we
> need dts changes to fix regressions in barebox master, we have to do
> it using overlays in arch/*/dts/ until an upstream fix arrives in dts/
> - I will not send the dts updates to the list, I'll just merge them to
> barebox next some time after a new Linux rc arrived (As just happened
> with 3.15-rc3)
Just to understand our further concept:
(I will use the example based on i.MX25).
We have 3 files in the arch/arm/dts/imx25*.
Should we now remove all of them, create our overlay for karo-tx25 board
and include basic file <arm/imx25-karo-tx25.dts> in the top of new overlay
file as basic DTS?
---
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH] Add Linux dts files and use them
2014-05-05 15:57 ` Alexander Shiyan
@ 2014-05-05 17:48 ` Sascha Hauer
2014-05-05 18:01 ` Alexander Shiyan
0 siblings, 1 reply; 23+ messages in thread
From: Sascha Hauer @ 2014-05-05 17:48 UTC (permalink / raw)
To: Alexander Shiyan; +Cc: barebox
On Mon, May 05, 2014 at 07:57:48PM +0400, Alexander Shiyan wrote:
> Mon, 5 May 2014 10:20:49 +0200 от Sascha Hauer <s.hauer@pengutronix.de>:
> > Some updates how I intend to handle upstream dts changes in barebox.
> >
> > - I will merge the latest upstream dts changes to barebox for each Linux
> > rc. Should dts changes introduce regressions this will at least give us
> > the Linux rc which introduced it
> > - I will always merge dts updates to barebox next, not to master. While
> > dts changes may be needed in master to fix regressions on one board,
> > they could also introduce new regressions on other boards. Should we
> > need dts changes to fix regressions in barebox master, we have to do
> > it using overlays in arch/*/dts/ until an upstream fix arrives in dts/
> > - I will not send the dts updates to the list, I'll just merge them to
> > barebox next some time after a new Linux rc arrived (As just happened
> > with 3.15-rc3)
>
> Just to understand our further concept:
>
> (I will use the example based on i.MX25).
> We have 3 files in the arch/arm/dts/imx25*.
> Should we now remove all of them, create our overlay for karo-tx25 board
> and include basic file <arm/imx25-karo-tx25.dts> in the top of new overlay
> file as basic DTS?
Yes, I think that's the way to go.
In the simplest case we have a arch/arm/dts/imx25-karo-tx25.dts with only a
single line:
#include <arm/imx25-karo-tx25.dts>
Then everything will be used from the upstream dts files. Additional
barebox specific stuff can be added to that file, like the environment
description.
With i.MX25 it happened that we also need SoC specific updates like for
example the iram which is not mainline. So we need a second line in
arch/arm/dts/imx25-karo-tx25.dts:
#include "imx25.dtsi"
The goal should be to mainline the SoC specific stuff so that imx25.dtsi
can be dropped, but I think we need the possibility to have SoC specific
barebox changes.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH] Add Linux dts files and use them
2014-05-05 17:48 ` Sascha Hauer
@ 2014-05-05 18:01 ` Alexander Shiyan
2014-05-08 7:39 ` Sascha Hauer
0 siblings, 1 reply; 23+ messages in thread
From: Alexander Shiyan @ 2014-05-05 18:01 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox
Mon, 5 May 2014 19:48:16 +0200 от Sascha Hauer <s.hauer@pengutronix.de>:
> On Mon, May 05, 2014 at 07:57:48PM +0400, Alexander Shiyan wrote:
> > Mon, 5 May 2014 10:20:49 +0200 от Sascha Hauer <s.hauer@pengutronix.de>:
> > > Some updates how I intend to handle upstream dts changes in barebox.
> > >
> > > - I will merge the latest upstream dts changes to barebox for each Linux
> > > rc. Should dts changes introduce regressions this will at least give us
> > > the Linux rc which introduced it
> > > - I will always merge dts updates to barebox next, not to master. While
> > > dts changes may be needed in master to fix regressions on one board,
> > > they could also introduce new regressions on other boards. Should we
> > > need dts changes to fix regressions in barebox master, we have to do
> > > it using overlays in arch/*/dts/ until an upstream fix arrives in dts/
> > > - I will not send the dts updates to the list, I'll just merge them to
> > > barebox next some time after a new Linux rc arrived (As just happened
> > > with 3.15-rc3)
> >
> > Just to understand our further concept:
> >
> > (I will use the example based on i.MX25).
> > We have 3 files in the arch/arm/dts/imx25*.
> > Should we now remove all of them, create our overlay for karo-tx25 board
> > and include basic file <arm/imx25-karo-tx25.dts> in the top of new overlay
> > file as basic DTS?
>
> Yes, I think that's the way to go.
>
> In the simplest case we have a arch/arm/dts/imx25-karo-tx25.dts with only a
> single line:
>
> #include <arm/imx25-karo-tx25.dts>
>
> Then everything will be used from the upstream dts files. Additional
> barebox specific stuff can be added to that file, like the environment
> description.
> With i.MX25 it happened that we also need SoC specific updates like for
> example the iram which is not mainline. So we need a second line in
> arch/arm/dts/imx25-karo-tx25.dts:
>
> #include "imx25.dtsi"
>
> The goal should be to mainline the SoC specific stuff so that imx25.dtsi
> can be dropped, but I think we need the possibility to have SoC specific
> barebox changes.
OK. Will move in this direction.
PS: As a start I see all arch/arm/dts/*-pinfunc.h could be removed now.
---
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH] Add Linux dts files and use them
2014-05-05 18:01 ` Alexander Shiyan
@ 2014-05-08 7:39 ` Sascha Hauer
0 siblings, 0 replies; 23+ messages in thread
From: Sascha Hauer @ 2014-05-08 7:39 UTC (permalink / raw)
To: Alexander Shiyan; +Cc: barebox
On Mon, May 05, 2014 at 10:01:24PM +0400, Alexander Shiyan wrote:
> > #include <arm/imx25-karo-tx25.dts>
> >
> > Then everything will be used from the upstream dts files. Additional
> > barebox specific stuff can be added to that file, like the environment
> > description.
> > With i.MX25 it happened that we also need SoC specific updates like for
> > example the iram which is not mainline. So we need a second line in
> > arch/arm/dts/imx25-karo-tx25.dts:
> >
> > #include "imx25.dtsi"
> >
> > The goal should be to mainline the SoC specific stuff so that imx25.dtsi
> > can be dropped, but I think we need the possibility to have SoC specific
> > barebox changes.
>
> OK. Will move in this direction.
>
> PS: As a start I see all arch/arm/dts/*-pinfunc.h could be removed now.
Yes, indeed, I removed them.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 23+ messages in thread