mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 2/2] ARM: create a imx_defconfig
Date: Wed,  7 May 2014 13:56:55 +0200	[thread overview]
Message-ID: <1399463815-30855-2-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1399463815-30855-1-git-send-email-s.hauer@pengutronix.de>

This creates a imx_defconfig which in future can catch all
non thumb i.MX boards not covered by imx_v7_defconfig. Right
now the Karo TX25 and Phytec phyCARD i.MX27 can so multi image
support. They are enabled in the new config and the previous
board specific config is removed.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/configs/imx_defconfig                  | 115 ++++++++++++++++++++++++
 arch/arm/configs/phytec-phycard-imx27_defconfig |  87 ------------------
 arch/arm/configs/tx25stk5_defconfig             |  87 ------------------
 3 files changed, 115 insertions(+), 174 deletions(-)
 create mode 100644 arch/arm/configs/imx_defconfig
 delete mode 100644 arch/arm/configs/phytec-phycard-imx27_defconfig
 delete mode 100644 arch/arm/configs/tx25stk5_defconfig

diff --git a/arch/arm/configs/imx_defconfig b/arch/arm/configs/imx_defconfig
new file mode 100644
index 0000000..5e036e3
--- /dev/null
+++ b/arch/arm/configs/imx_defconfig
@@ -0,0 +1,115 @@
+CONFIG_ARCH_IMX=y
+CONFIG_IMX_MULTI_BOARDS=y
+CONFIG_MACH_TX25=y
+CONFIG_MACH_PCA100=y
+CONFIG_IMX_IIM=y
+CONFIG_IMX_IIM_FUSE_BLOW=y
+CONFIG_AEABI=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_ARM_UNWIND=y
+CONFIG_MMU=y
+CONFIG_TEXT_BASE=0x0
+CONFIG_MALLOC_SIZE=0x0
+CONFIG_MALLOC_TLSF=y
+CONFIG_KALLSYMS=y
+CONFIG_RELOCATABLE=y
+CONFIG_PANIC_HANG=y
+CONFIG_LONGHELP=y
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+CONFIG_BLSPEC=y
+CONFIG_CONSOLE_ACTIVATE_NONE=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_RESET_SOURCE=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_MSLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_LOADENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_READF=y
+CONFIG_CMD_LET=y
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENUTREE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_LN=y
+CONFIG_CMD_TFTP=y
+CONFIG_CMD_FILETYPE=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_IOMEM=y
+CONFIG_CMD_MM=y
+CONFIG_CMD_CRC=y
+CONFIG_CMD_CRC_CMP=y
+CONFIG_CMD_MD5SUM=y
+CONFIG_CMD_FLASH=y
+CONFIG_CMD_UBIFORMAT=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_BOOTM_VERBOSE=y
+CONFIG_CMD_BOOTM_INITRD=y
+CONFIG_CMD_BOOTM_OFTREE=y
+CONFIG_CMD_UIMAGE=y
+# CONFIG_CMD_BOOTU is not set
+CONFIG_CMD_RESET=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_OFTREE=y
+CONFIG_CMD_OF_PROPERTY=y
+CONFIG_CMD_OF_NODE=y
+CONFIG_CMD_BAREBOX_UPDATE=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_MAGICVAR=y
+CONFIG_CMD_MAGICVAR_HELP=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_UNCOMPRESS=y
+CONFIG_CMD_MIITOOL=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DETECT=y
+CONFIG_NET=y
+CONFIG_NET_DHCP=y
+CONFIG_NET_PING=y
+CONFIG_NET_NETCONSOLE=y
+CONFIG_OFDEVICE=y
+CONFIG_OF_BAREBOX_DRIVERS=y
+CONFIG_DRIVER_NET_FEC_IMX=y
+CONFIG_NET_USB=y
+CONFIG_NET_USB_ASIX=y
+CONFIG_DRIVER_SPI_IMX=y
+CONFIG_I2C=y
+CONFIG_I2C_IMX=y
+CONFIG_MTD=y
+CONFIG_MTD_RAW_DEVICE=y
+CONFIG_DRIVER_CFI=y
+CONFIG_CFI_BUFFER_WRITE=y
+CONFIG_NAND=y
+# CONFIG_NAND_ECC_SOFT is not set
+# CONFIG_NAND_ECC_HW_SYNDROME is not set
+CONFIG_NAND_IMX=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_FASTMAP=y
+CONFIG_USB=y
+CONFIG_USB_EHCI=y
+CONFIG_USB_ULPI=y
+CONFIG_MCI=y
+CONFIG_MCI_IMX=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_LED_GPIO_OF=y
+CONFIG_LED_TRIGGERS=y
+CONFIG_EEPROM_AT25=y
+CONFIG_EEPROM_AT24=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_IMX=y
+CONFIG_IMX_WEIM=y
+CONFIG_FS_EXT4=y
+CONFIG_FS_TFTP=y
+CONFIG_FS_NFS=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_WRITE=y
+CONFIG_FS_FAT_LFN=y
+CONFIG_FS_UBIFS=y
+CONFIG_FS_UBIFS_COMPRESSION_LZO=y
diff --git a/arch/arm/configs/phytec-phycard-imx27_defconfig b/arch/arm/configs/phytec-phycard-imx27_defconfig
deleted file mode 100644
index 466a765..0000000
--- a/arch/arm/configs/phytec-phycard-imx27_defconfig
+++ /dev/null
@@ -1,87 +0,0 @@
-CONFIG_ARCH_IMX=y
-CONFIG_IMX_MULTI_BOARDS=y
-CONFIG_MACH_PCA100=y
-CONFIG_AEABI=y
-CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_ARM_UNWIND=y
-CONFIG_MMU=y
-CONFIG_MALLOC_SIZE=0x01000000
-CONFIG_MALLOC_TLSF=y
-CONFIG_KALLSYMS=y
-CONFIG_LONGHELP=y
-CONFIG_HUSH_FANCY_PROMPT=y
-CONFIG_CMDLINE_EDITING=y
-CONFIG_AUTO_COMPLETE=y
-CONFIG_MENU=y
-CONFIG_BLSPEC=y
-CONFIG_CONSOLE_ACTIVATE_NONE=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
-CONFIG_RESET_SOURCE=y
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_MSLEEP=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_READLINE=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TFTP=y
-CONFIG_CMD_FILETYPE=y
-CONFIG_CMD_ECHO_E=y
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_IOMEM=y
-CONFIG_CMD_CRC=y
-CONFIG_CMD_CRC_CMP=y
-CONFIG_CMD_MD5SUM=y
-CONFIG_CMD_FLASH=y
-CONFIG_CMD_BOOTM_SHOW_TYPE=y
-CONFIG_CMD_BOOTM_VERBOSE=y
-CONFIG_CMD_BOOTM_INITRD=y
-CONFIG_CMD_BOOTM_OFTREE=y
-CONFIG_CMD_UIMAGE=y
-# CONFIG_CMD_BOOTU is not set
-CONFIG_CMD_RESET=y
-CONFIG_CMD_GO=y
-CONFIG_CMD_OFTREE=y
-CONFIG_CMD_OF_PROPERTY=y
-CONFIG_CMD_OF_NODE=y
-CONFIG_CMD_BAREBOX_UPDATE=y
-CONFIG_CMD_TIMEOUT=y
-CONFIG_CMD_PARTITION=y
-CONFIG_CMD_MAGICVAR=y
-CONFIG_CMD_MAGICVAR_HELP=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_UNCOMPRESS=y
-CONFIG_CMD_MIITOOL=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DETECT=y
-CONFIG_NET=y
-CONFIG_NET_DHCP=y
-CONFIG_NET_PING=y
-CONFIG_NET_NETCONSOLE=y
-CONFIG_OFDEVICE=y
-CONFIG_OF_BAREBOX_DRIVERS=y
-CONFIG_DRIVER_NET_FEC_IMX=y
-CONFIG_NET_USB=y
-CONFIG_NET_USB_ASIX=y
-# CONFIG_SPI is not set
-CONFIG_MTD=y
-CONFIG_NAND=y
-# CONFIG_NAND_ECC_SOFT is not set
-# CONFIG_NAND_ECC_HW_SYNDROME is not set
-CONFIG_NAND_IMX=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_FASTMAP=y
-CONFIG_USB=y
-CONFIG_USB_EHCI=y
-CONFIG_USB_ULPI=y
-CONFIG_MCI=y
-CONFIG_MCI_IMX=y
-CONFIG_IMX_WEIM=y
-CONFIG_FS_EXT4=y
-CONFIG_FS_TFTP=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FAT_WRITE=y
-CONFIG_FS_FAT_LFN=y
-CONFIG_FS_UBIFS=y
-CONFIG_FS_UBIFS_COMPRESSION_LZO=y
diff --git a/arch/arm/configs/tx25stk5_defconfig b/arch/arm/configs/tx25stk5_defconfig
deleted file mode 100644
index b499b5d..0000000
--- a/arch/arm/configs/tx25stk5_defconfig
+++ /dev/null
@@ -1,87 +0,0 @@
-CONFIG_ARCH_IMX=y
-CONFIG_IMX_MULTI_BOARDS=y
-CONFIG_MACH_TX25=y
-CONFIG_IMX_IIM=y
-CONFIG_AEABI=y
-CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_ARM_UNWIND=y
-CONFIG_MMU=y
-CONFIG_TEXT_BASE=0x91d00000
-CONFIG_MALLOC_SIZE=0x1000000
-CONFIG_MALLOC_TLSF=y
-CONFIG_KALLSYMS=y
-CONFIG_LONGHELP=y
-CONFIG_HUSH_FANCY_PROMPT=y
-CONFIG_CMDLINE_EDITING=y
-CONFIG_AUTO_COMPLETE=y
-CONFIG_CONSOLE_ACTIVATE_NONE=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
-CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/karo-tx25/env"
-CONFIG_RESET_SOURCE=y
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_MSLEEP=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_READLINE=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_LN=y
-CONFIG_CMD_TFTP=y
-CONFIG_CMD_FILETYPE=y
-CONFIG_CMD_ECHO_E=y
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_IOMEM=y
-CONFIG_CMD_CRC=y
-CONFIG_CMD_CRC_CMP=y
-CONFIG_CMD_MD5SUM=y
-CONFIG_CMD_FLASH=y
-CONFIG_CMD_BOOTM_SHOW_TYPE=y
-CONFIG_CMD_BOOTM_VERBOSE=y
-CONFIG_CMD_BOOTM_INITRD=y
-CONFIG_CMD_BOOTM_OFTREE=y
-CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y
-CONFIG_CMD_UIMAGE=y
-# CONFIG_CMD_BOOTU is not set
-CONFIG_CMD_RESET=y
-CONFIG_CMD_GO=y
-CONFIG_CMD_OFTREE=y
-CONFIG_CMD_OF_PROPERTY=y
-CONFIG_CMD_OF_NODE=y
-CONFIG_CMD_SPLASH=y
-CONFIG_CMD_BAREBOX_UPDATE=y
-CONFIG_CMD_TIMEOUT=y
-CONFIG_CMD_PARTITION=y
-CONFIG_CMD_MAGICVAR=y
-CONFIG_CMD_MAGICVAR_HELP=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_UNCOMPRESS=y
-CONFIG_CMD_MIITOOL=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DETECT=y
-CONFIG_CMD_WD=y
-CONFIG_NET=y
-CONFIG_NET_DHCP=y
-CONFIG_NET_PING=y
-CONFIG_NET_NETCONSOLE=y
-CONFIG_OFDEVICE=y
-CONFIG_OF_BAREBOX_DRIVERS=y
-CONFIG_DRIVER_NET_FEC_IMX=y
-# CONFIG_SPI is not set
-CONFIG_MTD=y
-CONFIG_NAND=y
-CONFIG_NAND_IMX=y
-CONFIG_VIDEO=y
-CONFIG_DRIVER_VIDEO_IMX=y
-CONFIG_IMXFB_DRIVER_VIDEO_IMX_OVERLAY=y
-CONFIG_MCI=y
-CONFIG_MCI_IMX_ESDHC=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_IMX=y
-CONFIG_FS_TFTP=y
-CONFIG_FS_NFS=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FAT_WRITE=y
-CONFIG_FS_FAT_LFN=y
-CONFIG_ZLIB=y
-CONFIG_LZO_DECOMPRESS=y
-- 
2.0.0.rc0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      reply	other threads:[~2014-05-07 11:57 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-07 11:56 [PATCH 1/2] ARM: i.MX: Phytec-phyCARD-i.MX27: Switch to multi-image support Sascha Hauer
2014-05-07 11:56 ` Sascha Hauer [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1399463815-30855-2-git-send-email-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox