mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Lucas Stach <dev@lynxeye.de>
To: barebox@lists.infradead.org
Subject: [PATCH 13/25] mci: tegra: apply pad autocalibration on T30
Date: Mon, 12 May 2014 09:07:54 +0200	[thread overview]
Message-ID: <1399878486-16086-14-git-send-email-dev@lynxeye.de> (raw)
In-Reply-To: <1399878486-16086-1-git-send-email-dev@lynxeye.de>

Needed for SD cards connected to sdmmc1 or sdmmc3
to work properly.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
 drivers/mci/tegra-sdmmc.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/mci/tegra-sdmmc.c b/drivers/mci/tegra-sdmmc.c
index 0ea0b5c..6345157 100644
--- a/drivers/mci/tegra-sdmmc.c
+++ b/drivers/mci/tegra-sdmmc.c
@@ -59,6 +59,14 @@
 #define TEGRA_SDMMC_INT_SIG_EN				0x038
 #define  TEGRA_SDMMC_INT_SIG_EN_XFER_COMPLETE		(1 << 1)
 
+#define TEGRA_SDMMC_SDMEMCOMPPADCTRL			0x1e0
+#define  TEGRA_SDMMC_SDMEMCOMPPADCTRL_VREF_SEL_SHIFT	0
+
+#define TEGRA_SDMMC_AUTO_CAL_CONFIG			0x1e4
+#define  TEGRA_SDMMC_AUTO_CAL_CONFIG_PU_OFFSET_SHIFT	0
+#define  TEGRA_SDMMC_AUTO_CAL_CONFIG_PD_OFFSET_SHIFT	8
+#define  TEGRA_SDMMC_AUTO_CAL_CONFIG_ENABLE		(1 << 29)
+
 struct tegra_sdmmc_host {
 	struct mci_host		mci;
 	void __iomem		*regs;
@@ -333,6 +341,23 @@ static int tegra_sdmmc_init(struct mci_host *mci, struct device_d *dev)
 	val |= TEGRA_SDMMC_PWR_CNTL_33_V | TEGRA_SDMMC_PWR_CNTL_SD_BUS;
 	writel(val, regs + TEGRA_SDMMC_PWR_CNTL);
 
+	/* sdmmc1 and sdmmc3 on T30 need a bit of padctrl init */
+	if (of_device_is_compatible(mci->hw_dev->device_node,
+			"nvidia,tegra30-sdhci") &&
+			((u32)regs == 0x78000000 || (u32)regs == 78000400)) {
+		val = readl(regs + TEGRA_SDMMC_SDMEMCOMPPADCTRL);
+		val &= 0xfffffff0;
+		val |= 0x7 << TEGRA_SDMMC_SDMEMCOMPPADCTRL_VREF_SEL_SHIFT;
+		writel(val, regs + TEGRA_SDMMC_SDMEMCOMPPADCTRL);
+
+		val = readl(regs + TEGRA_SDMMC_AUTO_CAL_CONFIG);
+		val &= 0xffff0000;
+		val |= (0x62 << TEGRA_SDMMC_AUTO_CAL_CONFIG_PU_OFFSET_SHIFT) |
+		       (0x70 << TEGRA_SDMMC_AUTO_CAL_CONFIG_PD_OFFSET_SHIFT) |
+		       TEGRA_SDMMC_AUTO_CAL_CONFIG_ENABLE;
+		writel(val, regs + TEGRA_SDMMC_AUTO_CAL_CONFIG);
+	}
+
 	/* setup signaling */
 	writel(0xffffffff, regs + TEGRA_SDMMC_INT_STAT_EN);
 	writel(0xffffffff, regs + TEGRA_SDMMC_INT_SIG_EN);
-- 
1.9.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2014-05-12  7:06 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-12  7:07 [PATCH 00/25] Tegra-next Lucas Stach
2014-05-12  7:07 ` [PATCH 01/25] reset: add reset controller framework Lucas Stach
2014-05-12  7:07 ` [PATCH 02/25] tegra: lowlevel: add function to fetch chipid Lucas Stach
2014-05-12  7:07 ` [PATCH 03/25] reset: add tegra reset controller Lucas Stach
2014-05-12  7:07 ` [PATCH 04/25] clk: tegra: reset UARTS from clock controller Lucas Stach
2014-05-12  7:07 ` [PATCH 05/25] mci: tegra: add reset control Lucas Stach
2014-05-12  7:07 ` [PATCH 06/25] clk: tegra: remove device reset hack Lucas Stach
2014-05-12  7:07 ` [PATCH 07/25] clk: tegra: allow to register clocks with 16 bit divider Lucas Stach
2014-05-12  7:07 ` [PATCH 08/25] clk: tegra30: register i2c clocks Lucas Stach
2014-05-12  7:07 ` [PATCH 09/25] clk: tegra20: " Lucas Stach
2014-05-12  7:07 ` [PATCH 10/25] i2c: add Tegra driver Lucas Stach
2014-05-12 11:49   ` Sascha Hauer
2014-05-12 18:55     ` Lucas Stach
2014-05-12  7:07 ` [PATCH 11/25] ARM: tegra: beaver: activate sdmmc1 voltage rail Lucas Stach
2014-05-12  7:07 ` [PATCH 12/25] ARM: tegra: beaver: adjust pinmux to make sdmmc1 work Lucas Stach
2014-05-12  7:07 ` Lucas Stach [this message]
2014-05-12  7:07 ` [PATCH 14/25] mci: tegra: don't set 8bit mode unconditionally Lucas Stach
2014-05-12  7:07 ` [PATCH 15/25] pinctrl: tegra30: parse drive groups Lucas Stach
2014-05-12  7:07 ` [PATCH 16/25] scripts: tegra: import cbootimage Lucas Stach
2014-05-12  7:07 ` [PATCH 17/25] tegra: cbootimage: remove noisy output Lucas Stach
2014-05-12  7:07 ` [PATCH 18/25] Makefile.lib: add rule to built Tegra BCTs Lucas Stach
2014-05-12  7:08 ` [PATCH 19/25] images: add Tegra20 image build rules Lucas Stach
2014-05-12  7:08 ` [PATCH 20/25] images: add Tegra30 " Lucas Stach
2014-05-12  7:08 ` [PATCH 21/25] ARM: boards: colibri t20: import BCT cfgs Lucas Stach
2014-05-12  7:08 ` [PATCH 22/25] images: tegra: build all Toradex Colibri images Lucas Stach
2014-05-12  7:08 ` [PATCH 23/25] ARM: boards: beaver: import BCT cfg Lucas Stach
2014-05-12  7:08 ` [PATCH 24/25] images: tegra: build NVidia Beaver image Lucas Stach
2014-05-12  7:08 ` [PATCH 25/25] images: tegra: rename ac100 image Lucas Stach

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1399878486-16086-14-git-send-email-dev@lynxeye.de \
    --to=dev@lynxeye.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox