From: Holger Schurig <holgerschurig@gmail.com>
To: barebox@lists.infradead.org
Subject: [PATCH 04/19] commands: CMD_MEMORY -> COMPILE_MEMORY
Date: Tue, 13 May 2014 10:28:44 +0200 [thread overview]
Message-ID: <1399969739-10355-5-git-send-email-holgerschurig@gmail.com> (raw)
In-Reply-To: <1399969739-10355-1-git-send-email-holgerschurig@gmail.com>
* CMD_MEMORY was defined both in common/Kconfig and commands/Kconfig
* that symbol turned not a command on, but just the compilation of
commands/mem.c, so rename it accordingly
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
---
.../configs/omap3430_sdp3430_per_uart_defconfig | 2 +-
arch/arm/configs/omap3_evm_defconfig | 2 +-
arch/arm/configs/phytec-phycard-omap3_defconfig | 2 +-
arch/arm/configs/tx51stk5_defconfig | 2 +-
commands/Kconfig | 24 +++++++++-----------
commands/Makefile | 2 +-
common/Kconfig | 3 ---
7 files changed, 16 insertions(+), 21 deletions(-)
diff --git a/arch/arm/configs/omap3430_sdp3430_per_uart_defconfig b/arch/arm/configs/omap3430_sdp3430_per_uart_defconfig
index 013d000..445866f 100644
--- a/arch/arm/configs/omap3430_sdp3430_per_uart_defconfig
+++ b/arch/arm/configs/omap3430_sdp3430_per_uart_defconfig
@@ -1,7 +1,7 @@
CONFIG_ARCH_OMAP=y
# CONFIG_OMAP3_COPY_CLOCK_SRAM is not set
CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
-# CONFIG_CMD_MEMORY is not set
+# CONFIG_COMPILE_MEMORY is not set
CONFIG_TEXT_BASE=0x40200000
CONFIG_MEMORY_LAYOUT_FIXED=y
CONFIG_STACK_BASE=0x87BF7F10
diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig
index 3fe2647..90ace31 100644
--- a/arch/arm/configs/omap3_evm_defconfig
+++ b/arch/arm/configs/omap3_evm_defconfig
@@ -2,7 +2,7 @@ CONFIG_ARCH_OMAP=y
# CONFIG_OMAP3_COPY_CLOCK_SRAM is not set
CONFIG_MACH_OMAP3EVM=y
CONFIG_AEABI=y
-# CONFIG_CMD_MEMORY is not set
+# CONFIG_COMPILE_MEMORY is not set
CONFIG_TEXT_BASE=0x40200000
CONFIG_MEMORY_LAYOUT_FIXED=y
CONFIG_STACK_BASE=0x87BF7F10
diff --git a/arch/arm/configs/phytec-phycard-omap3_defconfig b/arch/arm/configs/phytec-phycard-omap3_defconfig
index b901658..d242c19 100644
--- a/arch/arm/configs/phytec-phycard-omap3_defconfig
+++ b/arch/arm/configs/phytec-phycard-omap3_defconfig
@@ -18,7 +18,7 @@ CONFIG_DEFCONFIG_LIST="$ARCH_DEFCONFIG"
CONFIG_GREGORIAN_CALENDER=y
CONFIG_HAS_KALLSYMS=y
CONFIG_HAS_MODULES=y
-CONFIG_CMD_MEMORY=y
+CONFIG_COMPILE_MEMORY=y
CONFIG_ENV_HANDLING=y
CONFIG_GENERIC_GPIO=y
CONFIG_BLOCK=y
diff --git a/arch/arm/configs/tx51stk5_defconfig b/arch/arm/configs/tx51stk5_defconfig
index 354e809..b05c01d 100644
--- a/arch/arm/configs/tx51stk5_defconfig
+++ b/arch/arm/configs/tx51stk5_defconfig
@@ -18,7 +18,7 @@ CONFIG_ARM_UNWIND=y
CONFIG_GREGORIAN_CALENDER=y
CONFIG_HAS_KALLSYMS=y
CONFIG_HAS_MODULES=y
-CONFIG_CMD_MEMORY=y
+CONFIG_COMPILE_MEMORY=y
CONFIG_ENV_HANDLING=y
CONFIG_GENERIC_GPIO=y
CONFIG_BLOCK=y
diff --git a/commands/Kconfig b/commands/Kconfig
index fb9a036..d987688 100644
--- a/commands/Kconfig
+++ b/commands/Kconfig
@@ -12,6 +12,11 @@ config HAS_POWEROFF
if COMMAND_SUPPORT
+config COMPILE_MEMORY
+ bool
+ help
+ Turns on compilation of mem.c
+
menu "Commands"
@@ -1196,13 +1201,6 @@ endmenu
menu "Memory"
-config CMD_MEMORY
- bool
- default y
- help
- TODO This is actually not a command, but turns in the /dev/mem device
- and common memory options (e.g. range parsing).
-
config CMD_CRC
tristate
select CRC32
@@ -1228,7 +1226,7 @@ config CMD_CRC_CMP
config CMD_MD
tristate
default y
- select CMD_MEMORY
+ select COMPILE_MEMORY
prompt "md"
help
Memory display
@@ -1252,7 +1250,7 @@ config CMD_MD
config CMD_MEMCMP
tristate
default y
- select CMD_MEMORY
+ select COMPILE_MEMORY
prompt "memcmp"
help
Memory compare
@@ -1274,7 +1272,7 @@ config CMD_MEMCMP
config CMD_MEMCPY
tristate
default y
- select CMD_MEMORY
+ select COMPILE_MEMORY
prompt "memcpy"
help
Memory copy
@@ -1293,7 +1291,7 @@ config CMD_MEMCPY
config CMD_MEMSET
tristate
default y
- select CMD_MEMORY
+ select COMPILE_MEMORY
prompt "memset"
help
Memory fill
@@ -1326,7 +1324,7 @@ config CMD_MEMTEST
config CMD_MM
tristate
- select CMD_MEMORY
+ select COMPILE_MEMORY
prompt "memory modify (mm)"
help
Memory modify with mask
@@ -1344,7 +1342,7 @@ config CMD_MM
config CMD_MW
tristate
default y
- select CMD_MEMORY
+ select COMPILE_MEMORY
prompt "mw"
help
Memory write
diff --git a/commands/Makefile b/commands/Makefile
index f927d21..f5aaf1c 100644
--- a/commands/Makefile
+++ b/commands/Makefile
@@ -1,4 +1,5 @@
obj-$(CONFIG_STDDEV) += stddev.o
+obj-$(CONFIG_COMPILE_MEMORY) += mem.o
obj-$(CONFIG_CMD_BOOTM) += bootm.o
obj-$(CONFIG_CMD_UIMAGE) += uimage.o
obj-$(CONFIG_CMD_LINUX16) += linux16.o
@@ -6,7 +7,6 @@ obj-$(CONFIG_CMD_LOADB) += loadb.o
obj-$(CONFIG_CMD_LOADY) += loadxy.o
obj-$(CONFIG_CMD_LOADS) += loads.o
obj-$(CONFIG_CMD_ECHO) += echo.o
-obj-$(CONFIG_CMD_MEMORY) += mem.o
obj-$(CONFIG_CMD_MD) += md.o
obj-$(CONFIG_CMD_MM) += mm.o
obj-$(CONFIG_CMD_MW) += mw.o
diff --git a/common/Kconfig b/common/Kconfig
index 0031cc8..20ce60c 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -21,9 +21,6 @@ config HAS_KALLSYMS
config HAS_MODULES
bool
-config CMD_MEMORY
- bool
-
config ENV_HANDLING
select CRC32
bool
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2014-05-13 8:24 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-13 8:28 [PATCH 00/19] commands rework patch series Holger Schurig
2014-05-13 8:28 ` [PATCH 01/19] commands: group 'help' output Holger Schurig
2014-05-13 13:48 ` Sascha Hauer
2014-05-13 14:07 ` Holger Schurig
2014-05-13 8:28 ` [PATCH 02/19] commands: harmonize in-barebox documentation Holger Schurig
2014-05-13 8:28 ` [PATCH 03/19] commands: harmonize in-barebox docs with Kconfig docs Holger Schurig
2014-05-13 8:28 ` Holger Schurig [this message]
2014-05-13 8:28 ` [PATCH 05/19] commands: CMD_DIGEST -> COMPILE_DIGEST Holger Schurig
2014-05-13 8:28 ` [PATCH 06/19] commands: move CMD_ARM_CPUINFO to commands/Kconfig Holger Schurig
2014-05-13 8:28 ` [PATCH 07/19] commands: move CMD_ARM_MMUINFO " Holger Schurig
2014-05-13 8:28 ` [PATCH 08/19] commands: move CMD_MIPS_CPUINFO " Holger Schurig
2014-05-13 11:26 ` Antony Pavlov
2014-05-13 11:28 ` Holger Schurig
2014-05-13 12:23 ` Antony Pavlov
2014-05-13 12:43 ` Holger Schurig
2014-05-13 13:09 ` Juergen Borleis
2014-05-13 8:28 ` [PATCH 09/19] commands: move CMD_BOOT_ORDER " Holger Schurig
2014-05-13 8:28 ` [PATCH 10/19] commands: move CMD_AT91_BOOT_TEST " Holger Schurig
2014-05-13 8:28 ` [PATCH 11/19] commands: move CMD_AT91MUX " Holger Schurig
2014-05-13 8:28 ` [PATCH 12/19] commands: move CMD_AT91MIX " Holger Schurig
2014-05-13 8:28 ` [PATCH 13/19] commands: HUSH_GETOPT -> CMD_GETOPT Holger Schurig
2014-05-13 8:28 ` [PATCH 14/19] commands: let all network commands depend on NET Holger Schurig
2014-05-13 8:28 ` [PATCH 15/19] commands: introduce CMD_HOST Holger Schurig
2014-05-13 8:28 ` [PATCH 16/19] commands: NET_PING -> CMD_PING Holger Schurig
2014-05-13 8:28 ` [PATCH 17/19] commands: NET_DHCP -> CMD_DHCP Holger Schurig
2014-05-13 8:28 ` [PATCH 18/19] commands: move CMD_IFUP to commands/Kconfig Holger Schurig
2014-05-13 8:28 ` [PATCH 19/19] commands: move CONFIG_LONGHELP " Holger Schurig
2014-05-13 8:30 ` [PATCH 00/19] commands rework patch series Holger Schurig
2014-05-13 8:41 ` Sascha Hauer
2014-05-13 9:00 ` Holger Schurig
2014-05-13 13:46 ` Sascha Hauer
2014-05-14 7:02 ` Sascha Hauer
2014-05-14 13:55 ` Antony Pavlov
2014-05-15 8:09 ` Holger Schurig
2014-05-15 11:52 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1399969739-10355-5-git-send-email-holgerschurig@gmail.com \
--to=holgerschurig@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox