From: Holger Schurig <holgerschurig@gmail.com>
To: barebox@lists.infradead.org
Subject: [PATCH 07/19] commands: move CMD_ARM_MMUINFO to commands/Kconfig
Date: Tue, 13 May 2014 10:28:47 +0200 [thread overview]
Message-ID: <1399969739-10355-8-git-send-email-holgerschurig@gmail.com> (raw)
In-Reply-To: <1399969739-10355-1-git-send-email-holgerschurig@gmail.com>
* this places the command into the "Information commands"
section of Kconfig
* while at it, imprive Kconfig documention
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
---
arch/arm/Kconfig | 8 --------
commands/Kconfig | 34 ++++++++++++++++++++++++++++++++++
2 files changed, 34 insertions(+), 8 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f8f3da0..73c7382 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -256,14 +256,6 @@ endmenu
menu "Arm specific settings"
-config CMD_ARM_MMUINFO
- bool "mmuinfo command"
- depends on CPU_V7
- default n
- help
- Say yes here to get a mmuinfo command to show some
- MMU and cache information using the cp15 registers
-
config CPU_V7_DCACHE_SKIP
bool "Skip DCache Invalidate"
depends on CPU_V7
diff --git a/commands/Kconfig b/commands/Kconfig
index 8b5110c..9789af4 100644
--- a/commands/Kconfig
+++ b/commands/Kconfig
@@ -91,6 +91,40 @@ config CMD_MEMINFO
system bytes = 282616
in use bytes = 274752
+config CMD_ARM_MMUINFO
+ bool "mmuinfo command"
+ depends on CPU_V7
+ default n
+ help
+ Say yes here to get a mmuinfo command to show some
+ MMU and cache information using the cp15 registers.
+
+ Example:
+
+ PAR result for 0x00110000:
+ privileged read: 0x00110090
+ Physical Address [31:12]: 0x00110000
+ Reserved [11]: 0x0
+ Not Outer Shareable [10]: 0x0
+ Non-Secure [9]: 0x0
+ Impl. def. [8]: 0x0
+ Shareable [7]: 0x1
+ Inner mem. attr. [6:4]: 0x1 (0b001 Strongly-ordered)
+ Outer mem. attr. [3:2]: 0x0 (0b00 Non-cacheable)
+ SuperSection [1]: 0x0
+ Failure [0]: 0x0
+ privileged write: 0x00110090
+ Physical Address [31:12]: 0x00110000
+ Reserved [11]: 0x0
+ Not Outer Shareable [10]: 0x0
+ Non-Secure [9]: 0x0
+ Impl. def. [8]: 0x0
+ Shareable [7]: 0x1
+ Inner mem. attr. [6:4]: 0x1 (0b001 Strongly-ordered)
+ Outer mem. attr. [3:2]: 0x0 (0b00 Non-cacheable)
+ SuperSection [1]: 0x0
+ Failure [0]: 0x0
+
config CMD_REGINFO
depends on HAS_REGINFO
select REGINFO
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2014-05-13 8:24 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-13 8:28 [PATCH 00/19] commands rework patch series Holger Schurig
2014-05-13 8:28 ` [PATCH 01/19] commands: group 'help' output Holger Schurig
2014-05-13 13:48 ` Sascha Hauer
2014-05-13 14:07 ` Holger Schurig
2014-05-13 8:28 ` [PATCH 02/19] commands: harmonize in-barebox documentation Holger Schurig
2014-05-13 8:28 ` [PATCH 03/19] commands: harmonize in-barebox docs with Kconfig docs Holger Schurig
2014-05-13 8:28 ` [PATCH 04/19] commands: CMD_MEMORY -> COMPILE_MEMORY Holger Schurig
2014-05-13 8:28 ` [PATCH 05/19] commands: CMD_DIGEST -> COMPILE_DIGEST Holger Schurig
2014-05-13 8:28 ` [PATCH 06/19] commands: move CMD_ARM_CPUINFO to commands/Kconfig Holger Schurig
2014-05-13 8:28 ` Holger Schurig [this message]
2014-05-13 8:28 ` [PATCH 08/19] commands: move CMD_MIPS_CPUINFO " Holger Schurig
2014-05-13 11:26 ` Antony Pavlov
2014-05-13 11:28 ` Holger Schurig
2014-05-13 12:23 ` Antony Pavlov
2014-05-13 12:43 ` Holger Schurig
2014-05-13 13:09 ` Juergen Borleis
2014-05-13 8:28 ` [PATCH 09/19] commands: move CMD_BOOT_ORDER " Holger Schurig
2014-05-13 8:28 ` [PATCH 10/19] commands: move CMD_AT91_BOOT_TEST " Holger Schurig
2014-05-13 8:28 ` [PATCH 11/19] commands: move CMD_AT91MUX " Holger Schurig
2014-05-13 8:28 ` [PATCH 12/19] commands: move CMD_AT91MIX " Holger Schurig
2014-05-13 8:28 ` [PATCH 13/19] commands: HUSH_GETOPT -> CMD_GETOPT Holger Schurig
2014-05-13 8:28 ` [PATCH 14/19] commands: let all network commands depend on NET Holger Schurig
2014-05-13 8:28 ` [PATCH 15/19] commands: introduce CMD_HOST Holger Schurig
2014-05-13 8:28 ` [PATCH 16/19] commands: NET_PING -> CMD_PING Holger Schurig
2014-05-13 8:28 ` [PATCH 17/19] commands: NET_DHCP -> CMD_DHCP Holger Schurig
2014-05-13 8:28 ` [PATCH 18/19] commands: move CMD_IFUP to commands/Kconfig Holger Schurig
2014-05-13 8:28 ` [PATCH 19/19] commands: move CONFIG_LONGHELP " Holger Schurig
2014-05-13 8:30 ` [PATCH 00/19] commands rework patch series Holger Schurig
2014-05-13 8:41 ` Sascha Hauer
2014-05-13 9:00 ` Holger Schurig
2014-05-13 13:46 ` Sascha Hauer
2014-05-14 7:02 ` Sascha Hauer
2014-05-14 13:55 ` Antony Pavlov
2014-05-15 8:09 ` Holger Schurig
2014-05-15 11:52 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1399969739-10355-8-git-send-email-holgerschurig@gmail.com \
--to=holgerschurig@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox