From: Lucas Stach <dev@lynxeye.de>
To: barebox@lists.infradead.org
Subject: [PATCH v2 09/25] clk: tegra20: register i2c clocks
Date: Wed, 14 May 2014 22:45:36 +0200 [thread overview]
Message-ID: <1400100352-13002-9-git-send-email-dev@lynxeye.de> (raw)
In-Reply-To: <1400100352-13002-1-git-send-email-dev@lynxeye.de>
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
drivers/clk/tegra/clk-tegra20.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c
index cb0a57181de4..5803414b9338 100644
--- a/drivers/clk/tegra/clk-tegra20.c
+++ b/drivers/clk/tegra/clk-tegra20.c
@@ -301,6 +301,19 @@ static void tegra20_periph_init(void)
clks[TEGRA20_CLK_SDMMC4] = tegra_clk_register_periph("sdmmc4",
mux_pllpcm_clkm, ARRAY_SIZE(mux_pllpcm_clkm), car_base,
CRC_CLK_SOURCE_SDMMC4, TEGRA20_CLK_SDMMC4, 1);
+
+ clks[TEGRA20_CLK_I2C1] = tegra_clk_register_periph_div16("i2c1",
+ mux_pllpcm_clkm, ARRAY_SIZE(mux_pllpcm_clkm), car_base,
+ CRC_CLK_SOURCE_I2C1, TEGRA20_CLK_I2C1, 1);
+ clks[TEGRA20_CLK_I2C2] = tegra_clk_register_periph_div16("i2c2",
+ mux_pllpcm_clkm, ARRAY_SIZE(mux_pllpcm_clkm), car_base,
+ CRC_CLK_SOURCE_I2C2, TEGRA20_CLK_I2C2, 1);
+ clks[TEGRA20_CLK_I2C3] = tegra_clk_register_periph_div16("i2c3",
+ mux_pllpcm_clkm, ARRAY_SIZE(mux_pllpcm_clkm), car_base,
+ CRC_CLK_SOURCE_I2C3, TEGRA20_CLK_I2C3, 1);
+ clks[TEGRA20_CLK_DVC] = tegra_clk_register_periph_div16("dvc",
+ mux_pllpcm_clkm, ARRAY_SIZE(mux_pllpcm_clkm), car_base,
+ CRC_CLK_SOURCE_DVC, TEGRA20_CLK_DVC, 1);
}
static struct tegra_clk_init_table init_table[] = {
--
1.9.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2014-05-14 20:47 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-14 20:45 [PATCH v2 01/25] reset: add reset controller framework Lucas Stach
2014-05-14 20:45 ` [PATCH v2 02/25] tegra: lowlevel: add function to fetch chipid Lucas Stach
2014-05-14 20:45 ` [PATCH v2 03/25] reset: add tegra reset controller Lucas Stach
2014-05-14 20:45 ` [PATCH v2 04/25] clk: tegra: reset UARTS from clock controller Lucas Stach
2014-05-14 20:45 ` [PATCH v2 05/25] mci: tegra: add reset control Lucas Stach
2014-05-14 20:45 ` [PATCH v2 06/25] clk: tegra: remove device reset hack Lucas Stach
2014-05-14 20:45 ` [PATCH v2 07/25] clk: tegra: allow to register clocks with 16 bit divider Lucas Stach
2014-05-14 20:45 ` [PATCH v2 08/25] clk: tegra30: register i2c clocks Lucas Stach
2014-05-14 20:45 ` Lucas Stach [this message]
2014-05-14 20:45 ` [PATCH v2 10/25] i2c: add Tegra driver Lucas Stach
2014-05-14 20:45 ` [PATCH v2 11/25] ARM: tegra: beaver: activate sdmmc1 voltage rail Lucas Stach
2014-05-14 20:45 ` [PATCH v2 12/25] ARM: tegra: beaver: adjust pinmux to make sdmmc1 work Lucas Stach
2014-05-14 20:45 ` [PATCH v2 13/25] mci: tegra: apply pad autocalibration on T30 Lucas Stach
2014-05-14 20:45 ` [PATCH v2 14/25] mci: tegra: don't set 8bit mode unconditionally Lucas Stach
2014-05-14 20:45 ` [PATCH v2 15/25] pinctrl: tegra30: parse drive groups Lucas Stach
2014-05-14 20:45 ` [PATCH v2 16/25] scripts: tegra: import cbootimage Lucas Stach
2014-05-14 20:45 ` [PATCH v2 17/25] tegra: cbootimage: remove noisy output Lucas Stach
2014-05-14 20:45 ` [PATCH v2 18/25] Makefile.lib: add rule to built Tegra BCTs Lucas Stach
2014-05-14 20:45 ` [PATCH v2 19/25] images: add Tegra20 image build rules Lucas Stach
2014-05-14 20:45 ` [PATCH v2 20/25] images: add Tegra30 " Lucas Stach
2014-05-14 20:45 ` [PATCH v2 21/25] ARM: boards: colibri t20: import BCT cfgs Lucas Stach
2014-05-14 20:45 ` [PATCH v2 22/25] images: tegra: build all Toradex Colibri images Lucas Stach
2014-05-14 20:45 ` [PATCH v2 23/25] ARM: boards: beaver: import BCT cfg Lucas Stach
2014-05-14 20:45 ` [PATCH v2 24/25] images: tegra: build NVidia Beaver image Lucas Stach
2014-05-14 20:45 ` [PATCH v2 25/25] images: tegra: rename ac100 image Lucas Stach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1400100352-13002-9-git-send-email-dev@lynxeye.de \
--to=dev@lynxeye.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox