From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 02/11] ARM: i.MX: iim: introduce private data struct
Date: Fri, 16 May 2014 12:30:49 +0200 [thread overview]
Message-ID: <1400236258-17924-2-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1400236258-17924-1-git-send-email-s.hauer@pengutronix.de>
Instead of duplicating data shared between the banks in a bank
specific struct, use a iim struct and a bank struct.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-imx/iim.c | 70 +++++++++++++++++++++++++++++--------------------
1 file changed, 42 insertions(+), 28 deletions(-)
diff --git a/arch/arm/mach-imx/iim.c b/arch/arm/mach-imx/iim.c
index 8e37cd7..95db531 100644
--- a/arch/arm/mach-imx/iim.c
+++ b/arch/arm/mach-imx/iim.c
@@ -30,16 +30,25 @@
#include <mach/iim.h>
#define DRIVERNAME "imx_iim"
+#define IIM_NUM_BANKS 8
static int iim_write_enable;
static int iim_sense_enable;
+struct iim_priv;
+
+struct iim_bank {
+ struct cdev cdev;
+ void __iomem *bankbase;
+ int bank;
+ struct iim_priv *iim;
+};
+
struct iim_priv {
struct cdev cdev;
void __iomem *base;
void __iomem *bankbase;
- int bank;
- int banksize;
+ struct iim_bank *bank[IIM_NUM_BANKS];
};
static int do_fuse_sense(void __iomem *reg_base, unsigned int bank,
@@ -88,22 +97,23 @@ static ssize_t imx_iim_cdev_read(struct cdev *cdev, void *buf, size_t count,
loff_t offset, ulong flags)
{
ulong size, i;
- struct iim_priv *priv = cdev->priv;
+ struct iim_bank *bank = container_of(cdev, struct iim_bank, cdev);
+ struct iim_priv *iim = bank->iim;
- size = min((loff_t)count, priv->banksize - offset);
+ size = min((loff_t)count, 32 - offset);
if (iim_sense_enable) {
for (i = 0; i < size; i++) {
int row_val;
- row_val = do_fuse_sense(priv->base,
- priv->bank, offset + i);
+ row_val = do_fuse_sense(iim->base,
+ bank->bank, offset + i);
if (row_val < 0)
return row_val;
((u8 *)buf)[i] = (u8)row_val;
}
} else {
for (i = 0; i < size; i++)
- ((u8 *)buf)[i] = ((u8 *)priv->bankbase)[(offset+i)*4];
+ ((u8 *)buf)[i] = ((u8 *)bank->bankbase)[(offset+i)*4];
}
return size;
@@ -173,22 +183,23 @@ static ssize_t imx_iim_cdev_write(struct cdev *cdev, const void *buf, size_t cou
loff_t offset, ulong flags)
{
ulong size, i;
- struct iim_priv *priv = cdev->priv;
+ struct iim_bank *bank = container_of(cdev, struct iim_bank, cdev);
+ struct iim_priv *iim = bank->iim;
- size = min((loff_t)count, priv->banksize - offset);
+ size = min((loff_t)count, 32 - offset);
if (IS_ENABLED(CONFIG_IMX_IIM_FUSE_BLOW) && iim_write_enable) {
for (i = 0; i < size; i++) {
int ret;
- ret = do_fuse_blow(priv->base, priv->bank,
+ ret = do_fuse_blow(iim->base, bank->bank,
offset + i, ((u8 *)buf)[i]);
if (ret < 0)
return ret;
}
} else {
for (i = 0; i < size; i++)
- ((u8 *)priv->bankbase)[(offset+i)*4] = ((u8 *)buf)[i];
+ ((u8 *)bank->bankbase)[(offset+i)*4] = ((u8 *)buf)[i];
}
return size;
@@ -200,26 +211,25 @@ static struct file_operations imx_iim_ops = {
.lseek = dev_lseek_default,
};
-static int imx_iim_add_bank(struct device_d *dev, void __iomem *base, int num)
+static int imx_iim_add_bank(struct iim_priv *iim, int num)
{
- struct iim_priv *priv;
+ struct iim_bank *bank;
struct cdev *cdev;
- priv = xzalloc(sizeof (*priv));
+ bank = xzalloc(sizeof (*bank));
- priv->base = base;
- priv->bankbase = priv->base + 0x800 + 0x400 * num;
- priv->bank = num;
- priv->banksize = 32;
- cdev = &priv->cdev;
- cdev->dev = dev;
+ bank->bankbase = iim->base + 0x800 + 0x400 * num;
+ bank->bank = num;
+ bank->iim = iim;
+ cdev = &bank->cdev;
cdev->ops = &imx_iim_ops;
- cdev->priv = priv;
cdev->size = 32;
cdev->name = asprintf(DRIVERNAME "_bank%d", num);
if (cdev->name == NULL)
return -ENOMEM;
+ iim->bank[num] = bank;
+
return devfs_create(cdev);
}
@@ -273,18 +283,22 @@ static inline void imx_iim_init_dt(struct device_d *dev)
static int imx_iim_probe(struct device_d *dev)
{
- int i;
- void __iomem *base;
+ struct iim_priv *iim;
+ int i, ret;
+
+ iim = xzalloc(sizeof(*iim));
- base = dev_request_mem_region(dev, 0);
- if (!base)
+ iim->base = dev_request_mem_region(dev, 0);
+ if (!iim->base)
return -EBUSY;
- for (i = 0; i < 8; i++) {
- imx_iim_add_bank(dev, base, i);
+ for (i = 0; i < IIM_NUM_BANKS; i++) {
+ ret = imx_iim_add_bank(iim, i);
+ if (ret)
+ return ret;
}
- imx_iim_init_dt(dev);
+ imx_iim_init_dt(dev, iim);
if (IS_ENABLED(CONFIG_IMX_IIM_FUSE_BLOW))
dev_add_param_bool(dev, "permanent_write_enable",
--
2.0.0.rc0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2014-05-16 10:31 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-16 10:30 [PATCH 01/11] ARM: i.MX: iim: Check result of dev_request_mem_region Sascha Hauer
2014-05-16 10:30 ` Sascha Hauer [this message]
2014-05-16 10:30 ` [PATCH 03/11] ARM: i.MX: iim: Add namespace to functions Sascha Hauer
2014-05-16 10:30 ` [PATCH 04/11] ARM: i.MX: iim: register iim device Sascha Hauer
2014-05-16 10:30 ` [PATCH 05/11] ARM: i.MX: iim: pass private data struct to imx_iim_fuse_blow Sascha Hauer
2014-05-16 10:30 ` [PATCH 06/11] ARM: i.MX: iim: pass private data struct to imx_iim_fuse_sense Sascha Hauer
2014-05-16 10:30 ` [PATCH 07/11] ARM: i.MX: iim: use dev_* for messages Sascha Hauer
2014-05-16 10:30 ` [PATCH 08/11] ARM: i.MX: iim: move static variables into driver struct Sascha Hauer
2014-05-16 10:30 ` [PATCH 09/11] ARM: i.MX: iim: don't make detour over cdev API Sascha Hauer
2014-05-16 10:30 ` [PATCH 10/11] ARM: i.MX: iim: make fuse blowing work on i.MX5 Sascha Hauer
2014-05-16 10:30 ` [PATCH 11/11] ARM: i.MX: iim: provide a MAC address convenience variable Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1400236258-17924-2-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox