From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH] ARM: i.MX: iim: Add regulator support
Date: Fri, 16 May 2014 15:12:43 +0200 [thread overview]
Message-ID: <1400245963-1811-1-git-send-email-s.hauer@pengutronix.de> (raw)
The voltage for programming the fuses is external to the SoC and
on some boards this is controllable with a regulator, so add regulator
support to the iim driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-imx/iim.c | 60 ++++++++++++++++++++++++++++++++++++-------------
1 file changed, 44 insertions(+), 16 deletions(-)
diff --git a/arch/arm/mach-imx/iim.c b/arch/arm/mach-imx/iim.c
index 294f41c..16ba678 100644
--- a/arch/arm/mach-imx/iim.c
+++ b/arch/arm/mach-imx/iim.c
@@ -26,6 +26,8 @@
#include <malloc.h>
#include <of.h>
#include <io.h>
+#include <regulator.h>
+#include <linux/err.h>
#include <mach/iim.h>
#include <mach/imx51-regs.h>
@@ -53,6 +55,7 @@ struct iim_priv {
int write_enable;
int sense_enable;
void (*supply)(int enable);
+ struct regulator *fuse_supply;
};
struct imx_iim_drvdata {
@@ -139,7 +142,7 @@ int imx_iim_read(unsigned int banknum, int offset, void *buf, int count)
return imx_iim_cdev_read(&bank->cdev, buf, count, offset, 0);
}
-static int imx_iim_fuse_blow(struct iim_bank *bank, unsigned int row, u8 value)
+static int imx_iim_fuse_blow_one(struct iim_bank *bank, unsigned int row, u8 value)
{
struct iim_priv *iim = bank->iim;
void __iomem *reg_base = iim->base;
@@ -195,30 +198,53 @@ out:
return ret;
}
+static int imx_iim_fuse_blow(struct iim_bank *bank, unsigned offset, const void *buf,
+ unsigned size)
+{
+ struct iim_priv *iim = bank->iim;
+ int ret, i;
+
+ if (IS_ERR(iim->fuse_supply)) {
+ iim->fuse_supply = regulator_get(iim->dev.parent, "vdd-fuse");
+ dev_info(iim->dev.parent, "regul: %p\n", iim->fuse_supply);
+ if (IS_ERR(iim->fuse_supply))
+ return PTR_ERR(iim->fuse_supply);
+ }
+
+ ret = regulator_enable(iim->fuse_supply);
+ if (ret < 0)
+ return ret;
+
+ if (iim->supply)
+ iim->supply(1);
+
+ for (i = 0; i < size; i++) {
+ ret = imx_iim_fuse_blow_one(bank, offset + i, ((u8 *)buf)[i]);
+ if (ret < 0)
+ goto err_out;
+ }
+
+ if (iim->supply)
+ iim->supply(0);
+
+ ret = 0;
+
+err_out:
+ regulator_disable(iim->fuse_supply);
+
+ return ret;
+}
+
static ssize_t imx_iim_cdev_write(struct cdev *cdev, const void *buf, size_t count,
loff_t offset, ulong flags)
{
ulong size, i;
struct iim_bank *bank = container_of(cdev, struct iim_bank, cdev);
- struct iim_priv *iim = bank->iim;
size = min((loff_t)count, 32 - offset);
if (IS_ENABLED(CONFIG_IMX_IIM_FUSE_BLOW) && bank->iim->write_enable) {
- if (iim->supply)
- iim->supply(1);
-
- for (i = 0; i < size; i++) {
- int ret;
-
- ret = imx_iim_fuse_blow(bank, offset + i, ((u8 *)buf)[i]);
- if (ret < 0)
- return ret;
- }
-
- if (iim->supply)
- iim->supply(0);
-
+ return imx_iim_fuse_blow(bank, offset, buf, size);
} else {
for (i = 0; i < size; i++)
((u8 *)bank->bankbase)[(offset+i)*4] = ((u8 *)buf)[i];
@@ -382,6 +408,8 @@ static int imx_iim_probe(struct device_d *dev)
if (ret)
return ret;
+ iim->fuse_supply = ERR_PTR(-ENODEV);
+
iim->base = dev_request_mem_region(dev, 0);
if (!iim->base)
return -EBUSY;
--
2.0.0.rc0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
reply other threads:[~2014-05-16 13:13 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1400245963-1811-1-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox