From: Antony Pavlov <antonynpavlov@gmail.com>
To: barebox@lists.infradead.org
Subject: [PATCH] [RFC] [WIP] commands: add tree view capable lsusb
Date: Wed, 21 May 2014 12:54:42 +0400 [thread overview]
Message-ID: <1400662482-23560-1-git-send-email-antonynpavlov@gmail.com> (raw)
This patch adds U-Boot 'usb tree' command functionality to barebox.
Here is a sample 'lsusb -t' output on RC Module MB 77.07 board
with numerous USB devices attached:
MB 77.07: / lsusb -t
USB: scanning bus for devices...
0 USB Device(s) found
1 ID 0000:0000
| u-boot EHCI Host Controller
|
+-2 ID 1a40:0101
| USB 2.0 Hub
|
+-3 ID 05e3:0660
| | USB2.0 Hub
| |
| +-4 ID 2001:3c05
| | D-Link Corporation DUB-E100 000001
| |
| +-5 ID 046d:0824
| | 225ACF90
| |
| +-6 ID 05e3:0608
| | | USB2.0 Hub
| | |
| | +-7 ID 13fe:3e00
| | | UFD 2.0 Silicon-Power4G 201212SP0014070F2CB454C8B411
| | |
| | +-8 ID 04d9:1605
| | | USB Keyboard
| | |
| | +-9 ID 0424:7500
| | | SMSC LAN7500 00000001b
| | |
| | +-10 ID 067b:2303
| | Prolific Technology Inc. USB-Serial Controller
| |
| +-11 ID 1267:0201
| PS/2+USB Mouse
|
+-12 ID 067b:2305
| Prolific Technology Inc. IEEE-1284 Controller
|
+-13 ID 1005:b113
USB FLASH DRIVE 070F29A906CF5145
Original 'usb tree' output contains addition information
on device type, bandwidth and consumption current.
Here is a U-Boot 'usb tree' output on the same board:
MBOOT # usb tree
Device Tree:
1 Hub (480 Mb/s, 0mA)
| u-boot EHCI Host Controller
|
+-2 Hub (480 Mb/s, 100mA)
| USB 2.0 Hub
|
+-3 Hub (480 Mb/s, 100mA)
| | USB2.0 Hub
| |
| +-4 Vendor specific (480 Mb/s, 250mA)
| | D-Link Corporation DUB-E100 000001
| |
| +-5 See Interface (480 Mb/s, 500mA)
| | 225ACF90
| |
| +-6 Hub (480 Mb/s, 100mA)
| | | USB2.0 Hub
| | |
| | +-7 Mass Storage (480 Mb/s, 200mA)
| | | UFD 2.0 Silicon-Power4G 201212SP0014070F2CB454C8B411
| | |
| | +-8 Human Interface (1.5 Mb/s, 100mA)
| | | USB Keyboard
| | |
| | +-9 Vendor specific (480 Mb/s, 320mA)
| | | SMSC LAN7500 00000001b
| | |
| | +-10 Vendor specific (12 Mb/s, 100mA)
| | Prolific Technology Inc. USB-Serial Controller
| |
| +-11 Human Interface (1.5 Mb/s, 100mA)
| PS/2+USB Mouse
|
+-12 Printer (12 Mb/s, 100mA)
| Prolific Technology Inc. IEEE-1284 Controller
|
+-13 Mass Storage (480 Mb/s, 200mA)
USB FLASH DRIVE 070F29A906CF5145
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
commands/usb.c | 118 +++++++++++++++++++++++++++++++++++++++++++++++++
drivers/usb/core/usb.c | 2 +-
include/usb/usb.h | 3 ++
3 files changed, 122 insertions(+), 1 deletion(-)
diff --git a/commands/usb.c b/commands/usb.c
index 073c79c..08cfa42 100644
--- a/commands/usb.c
+++ b/commands/usb.c
@@ -55,3 +55,121 @@ BAREBOX_CMD_START(usb)
BAREBOX_CMD_HELP(cmd_usb_help)
BAREBOX_CMD_COMPLETE(empty_complete)
BAREBOX_CMD_END
+
+/* shows the device tree recursively */
+static void usb_show_tree_graph(struct usb_device *dev, char *pre)
+{
+ int i, index;
+ int has_child, last_child;
+
+ index = strlen(pre);
+ printf(" %s", pre);
+ /* check if the device has connected children */
+ has_child = 0;
+ for (i = 0; i < dev->maxchild; i++) {
+ if (dev->children[i] != NULL)
+ has_child = 1;
+ }
+ /* check if we are the last one */
+ last_child = 1;
+ if (dev->parent != NULL) {
+ for (i = 0; i < dev->parent->maxchild; i++) {
+ /* search for children */
+ if (dev->parent->children[i] == dev) {
+ /* found our pointer, see if we have a
+ * little sister
+ */
+ while (i++ < dev->parent->maxchild) {
+ if (dev->parent->children[i] != NULL) {
+ /* found a sister */
+ last_child = 0;
+ break;
+ } /* if */
+ } /* while */
+ } /* device found */
+ } /* for all children of the parent */
+ printf("\b+-");
+ /* correct last child */
+ if (last_child)
+ pre[index-1] = ' ';
+ } /* if not root hub */
+ else
+ printf(" ");
+ printf("%d ", dev->devnum);
+ pre[index++] = ' ';
+ pre[index++] = has_child ? '|' : ' ';
+ pre[index] = 0;
+ printf("ID %04x:%04x\n",
+ dev->descriptor->idVendor, dev->descriptor->idProduct);
+ if (strlen(dev->mf) || strlen(dev->prod) || strlen(dev->serial))
+ printf(" %s %s %s %s\n", pre, dev->mf, dev->prod, dev->serial);
+ printf(" %s\n", pre);
+ if (dev->maxchild > 0) {
+ for (i = 0; i < dev->maxchild; i++) {
+ if (dev->children[i] != NULL) {
+ usb_show_tree_graph(dev->children[i], pre);
+ pre[index] = 0;
+ }
+ }
+ }
+}
+
+/* main routine for the tree command */
+static void usb_show_tree(struct usb_device *dev)
+{
+ char preamble[32];
+
+ memset(preamble, 0, 32);
+ usb_show_tree_graph(dev, &preamble[0]);
+}
+
+static int do_lsusb(int argc, char *argv[])
+{
+ int opt;
+ int tree = 0;
+ struct usb_device *dev;
+
+ while ((opt = getopt(argc, argv, "t")) > 0) {
+ switch (opt) {
+ case 't':
+ tree = 1;
+ break;
+ default:
+ return opt;
+ }
+ }
+
+ usb_rescan(0);
+
+ list_for_each_entry(dev, &usb_device_list, list) {
+
+ if (tree) {
+ if (dev->parent == NULL)
+ usb_show_tree(dev);
+ } else {
+ printf("Bus %03d Device %03d: ID %04x:%04x %s\n",
+ dev->host->busnum, dev->devnum,
+ dev->descriptor->idVendor,
+ dev->descriptor->idProduct,
+ dev->prod);
+ }
+ }
+
+ return 0;
+}
+
+BAREBOX_CMD_HELP_START(lsusb)
+BAREBOX_CMD_HELP_TEXT("list USB devices")
+BAREBOX_CMD_HELP_TEXT("")
+BAREBOX_CMD_HELP_TEXT("Options:")
+BAREBOX_CMD_HELP_OPT("-t", "dump the physical USB device hierarchy as a tree")
+BAREBOX_CMD_HELP_END
+
+BAREBOX_CMD_START(lsusb)
+ .cmd = do_lsusb,
+ BAREBOX_CMD_DESC("list USB devices")
+ BAREBOX_CMD_OPTS("[-t]")
+ BAREBOX_CMD_GROUP(CMD_GRP_HWMANIP)
+ BAREBOX_CMD_HELP(cmd_lsusb_help)
+ BAREBOX_CMD_COMPLETE(empty_complete)
+BAREBOX_CMD_END
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 9c1571d..32ea5ec 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -70,7 +70,7 @@ static int hub_port_reset(struct usb_device *dev, int port,
unsigned short *portstat);
static LIST_HEAD(host_list);
-static LIST_HEAD(usb_device_list);
+LIST_HEAD(usb_device_list);
static void print_usb_device(struct usb_device *dev)
{
diff --git a/include/usb/usb.h b/include/usb/usb.h
index 821724e..9319f2e 100644
--- a/include/usb/usb.h
+++ b/include/usb/usb.h
@@ -544,4 +544,7 @@ enum usb_phy_interface {
USBPHY_INTERFACE_MODE_SERIAL,
USBPHY_INTERFACE_MODE_HSIC,
};
+
+extern struct list_head usb_device_list;
+
#endif /*_USB_H_ */
--
1.9.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2014-05-21 9:01 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-21 8:54 Antony Pavlov [this message]
2014-05-21 13:20 ` Holger Schurig
2014-05-21 14:11 ` Antony Pavlov
2014-06-02 7:24 ` Sascha Hauer
2014-06-02 7:59 ` Holger Schurig
2014-06-02 8:31 ` Sascha Hauer
2014-06-02 10:20 ` Antony Pavlov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1400662482-23560-1-git-send-email-antonynpavlov@gmail.com \
--to=antonynpavlov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox