From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-wg0-x22e.google.com ([2a00:1450:400c:c00::22e]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1WnE8C-0001Pl-Hu for barebox@lists.infradead.org; Wed, 21 May 2014 21:33:01 +0000 Received: by mail-wg0-f46.google.com with SMTP id n12so2531352wgh.17 for ; Wed, 21 May 2014 14:32:36 -0700 (PDT) From: Franck Jullien Date: Wed, 21 May 2014 23:32:28 +0200 Message-Id: <1400707949-16521-2-git-send-email-franck.jullien@gmail.com> In-Reply-To: <1400707949-16521-1-git-send-email-franck.jullien@gmail.com> References: <1400707949-16521-1-git-send-email-franck.jullien@gmail.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 2/3] openrisc: fix relocation code To: barebox@lists.infradead.org The relocation code can now relocate from anywhere to the RAM. The old code assumed that the binary was copied to the RAM by some PBL and then it just relocated the .text section from the loaded address to the linked address. Now, it first checks if vectors are somewhere else than the linked address. If yes, there are copied to address 0 (or to the exception vector base address if register EVBAR is present). Then, the .text section is relocated from its current location to the RAM. Signed-off-by: Franck Jullien --- arch/openrisc/cpu/start.S | 61 ++++++++++++++++++++++++++++++++------------ 1 files changed, 44 insertions(+), 17 deletions(-) diff --git a/arch/openrisc/cpu/start.S b/arch/openrisc/cpu/start.S index 269abc0..7ac790b 100644 --- a/arch/openrisc/cpu/start.S +++ b/arch/openrisc/cpu/start.S @@ -46,9 +46,47 @@ __reset: l.ori r3,r0,SPR_SR_SM l.mtspr r0,r3,SPR_SR + l.jal _cur + l.nop +_cur: + l.ori r8, r9, 0 /* Get _cur current address */ + + l.movhi r3, hi(_cur) + l.ori r3, r3, lo(_cur) + l.sfeq r8, r3 /* If we are running at the linked address */ + l.bf _no_vector_reloc /* there is not need for relocation */ + l.sub r8, r8, r3 + + l.mfspr r4, r0, SPR_CPUCFGR + l.andi r4, r4, SPR_CPUCFGR_EVBARP /* Exception Vector Base Address Register present ? */ + l.sfnei r4,0 + l.bnf _reloc_vectors + l.movhi r5, 0 /* Destination */ + + l.mfspr r4, r0, SPR_EVBAR + l.add r5, r5, r4 + +_reloc_vectors: + /* Relocate vectors*/ + l.movhi r6, hi(__start) /* Length */ + l.ori r6, r6, lo(__start) + l.ori r3, r8, 0 + +.L_relocvectors: + l.lwz r7, 0(r3) + l.sw 0(r5), r7 + l.addi r5, r5, 4 + l.sfeq r5, r6 + l.bnf .L_relocvectors + l.addi r3, r3, 4 + +_no_vector_reloc: + /* Relocate barebox */ - l.movhi r3,hi(__start) /* source start address */ + l.movhi r3,hi(__start) /* source start offset */ l.ori r3,r3,lo(__start) + l.add r3,r8,r3 + l.movhi r4,hi(_stext) /* dest start address */ l.ori r4,r4,lo(_stext) l.movhi r5,hi(__end) /* dest end address */ @@ -62,22 +100,11 @@ __reset: l.bf .L_reloc l.addi r4,r4,4 /*delay slot */ -#ifdef CONFIG_SYS_RELOCATE_VECTORS - /* Relocate vectors from 0xf0000000 to 0x00000000 */ - l.movhi r4, 0xf000 /* source */ - l.movhi r5, 0 /* destination */ - l.addi r6, r5, CONFIG_SYS_VECTORS_LEN /* length */ -.L_relocvectors: - l.lwz r7, 0(r4) - l.sw 0(r5), r7 - l.addi r5, r5, 4 - l.sfeq r5,r6 - l.bnf .L_relocvectors - l.addi r4,r4, 4 -#endif - - l.j _start - l.nop + /* JUMP TO RELOC ADDR */ + l.movhi r4, hi(_start) + l.ori r4, r4, lo(_start) + l.jr r4 + l.nop /* bus error */ .org 0x200 -- 1.7.1 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox