From: Antony Pavlov <antonynpavlov@gmail.com>
To: barebox@lists.infradead.org
Subject: [PATCH v2 3/7] clocksource: add uemd clocksource
Date: Thu, 22 May 2014 23:48:46 +0400 [thread overview]
Message-ID: <1400788130-24202-4-git-send-email-antonynpavlov@gmail.com> (raw)
In-Reply-To: <1400788130-24202-1-git-send-email-antonynpavlov@gmail.com>
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
drivers/clocksource/Kconfig | 4 ++
drivers/clocksource/Makefile | 1 +
drivers/clocksource/uemd.c | 130 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 135 insertions(+)
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 43974f0..c1480ce 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -48,3 +48,7 @@ config CLOCKSOURCE_NOMADIK
config CLOCKSOURCE_ORION
bool
depends on ARCH_MVEBU
+
+config CLOCKSOURCE_UEMD
+ bool
+ depends on ARCH_UEMD
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 834a15d..97c0288 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_CLOCKSOURCE_DUMMY) += dummy.o
obj-$(CONFIG_CLOCKSOURCE_MVEBU) += mvebu.o
obj-$(CONFIG_CLOCKSOURCE_NOMADIK) += nomadik.o
obj-$(CONFIG_CLOCKSOURCE_ORION) += orion.o
+obj-$(CONFIG_CLOCKSOURCE_UEMD) += uemd.o
diff --git a/drivers/clocksource/uemd.c b/drivers/clocksource/uemd.c
new file mode 100644
index 0000000..2ea455e
--- /dev/null
+++ b/drivers/clocksource/uemd.c
@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) 2014 Antony Pavlov <antonynpavlov@gmail.com>
+ *
+ * Based on
+ * https://github.com/RC-MODULE/linux-3.10.x/tree/k1879-3.10.28/arch/arm/mach-uemd/clocksource.c
+ * (C) 2011 RC Module, Sergey Mironov <ierton@gmail.com>
+ *
+ * This file is part of barebox.
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <io.h>
+#include <init.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <clock.h>
+
+#define TIMER_LOAD 0x00
+#define TIMER_VALUE 0x04
+#define TIMER_CONTROL 0x08
+
+#define TIMER_CTRL_ENABLE BIT(7)
+
+/*
+ * TIMER_CONTROL_PERIODIC:
+ * The counter generates an interrupt at a constant interval,
+ * reloading the original value after wrapping past zero.
+ */
+#define TIMER_CTRL_PERIODIC BIT(6)
+
+/* interrupt enable */
+#define TIMER_CTRL_IE BIT(5)
+
+/* Prescalers */
+#define TIMER_CTRL_P1 (0 << 2)
+#define TIMER_CTRL_P16 (1 << 2)
+#define TIMER_CTRL_P256 (2 << 2)
+
+/* Counter register size is 32 Bit long */
+#define TIMER_CTRL_32BIT BIT(1)
+
+static void __iomem *timer_base;
+
+static uint64_t uemd_timer_cs_read(void)
+{
+ /* Down counter! */
+ return ~__raw_readl(timer_base + TIMER_VALUE);
+}
+
+static struct clocksource uemd_cs = {
+ .read = uemd_timer_cs_read,
+ .mask = CLOCKSOURCE_MASK(32),
+};
+
+static int uemd_timer_probe(struct device_d *dev)
+{
+ int mode;
+ struct clk *timer_clk;
+
+ /* use only one timer */
+ if (timer_base)
+ return -EBUSY;
+
+ timer_base = dev_request_mem_region(dev, 0);
+ if (!timer_base) {
+ dev_err(dev, "could not get memory region\n");
+ return -ENODEV;
+ }
+
+ timer_clk = clk_get(dev, NULL);
+ if (IS_ERR(timer_clk)) {
+ int ret = PTR_ERR(timer_clk);
+ dev_err(dev, "clock not found: %d\n", ret);
+ return ret;
+ }
+
+ /* Stop timer */
+ __raw_writel(0, timer_base + TIMER_CONTROL);
+
+ /* Setup */
+ __raw_writel(0xffffffff, timer_base + TIMER_LOAD);
+ __raw_writel(0xffffffff, timer_base + TIMER_VALUE);
+
+ mode = TIMER_CTRL_32BIT |
+ TIMER_CTRL_PERIODIC |
+ TIMER_CTRL_P1;
+ __raw_writel(mode, timer_base + TIMER_CONTROL);
+
+ /* Fire it up! */
+ mode |= TIMER_CTRL_ENABLE;
+ __raw_writel(mode, timer_base + TIMER_CONTROL);
+
+ clocks_calc_mult_shift(&uemd_cs.mult, &uemd_cs.shift,
+ clk_get_rate(timer_clk), NSEC_PER_SEC, 10);
+
+ init_clock(&uemd_cs);
+
+ return 0;
+}
+
+static __maybe_unused struct of_device_id uemd_timer_dt_ids[] = {
+ {
+ .compatible = "module,uemd-timer",
+ }, {
+ /* sentinel */
+ }
+};
+
+static struct driver_d uemd_timer_driver = {
+ .probe = uemd_timer_probe,
+ .name = "uemd-timer",
+ .of_compatible = DRV_OF_COMPAT(uemd_timer_dt_ids),
+};
+
+static int uemd_timer_init(void)
+{
+ return platform_driver_register(&uemd_timer_driver);
+}
+coredevice_initcall(uemd_timer_init);
--
1.9.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2014-05-22 19:49 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-22 19:48 [PATCH v2 0/7] ARM: initial support for RC Module UEMD SoCs and MB 77.07 board Antony Pavlov
2014-05-22 19:48 ` [PATCH v2 1/7] ARM: initial support for RC Module UEMD SoCs Antony Pavlov
2014-05-22 19:48 ` [PATCH v2 2/7] ARM: uemd: add DEBUG_LL support Antony Pavlov
2014-05-30 6:09 ` Holger Schurig
2014-05-30 9:05 ` Antony Pavlov
2014-05-30 9:03 ` Holger Schurig
2014-05-22 19:48 ` Antony Pavlov [this message]
2014-05-22 19:48 ` [PATCH v2 4/7] ARM: dts: add minimal К1879ХБ1Я devicetree file Antony Pavlov
2014-05-22 19:48 ` [PATCH v2 5/7] ARM: uemd: add mb7707 board support Antony Pavlov
2014-05-22 19:48 ` [PATCH v2 6/7] ARM: uemd: add module-mb7707_defconfig Antony Pavlov
2014-05-22 19:48 ` [PATCH v2 7/7] ARM: mb7707: add barebox mini-howto Antony Pavlov
2014-05-27 5:14 ` [PATCH v2 0/7] ARM: initial support for RC Module UEMD SoCs and MB 77.07 board Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1400788130-24202-4-git-send-email-antonynpavlov@gmail.com \
--to=antonynpavlov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox