From: Holger Schurig <holgerschurig@gmail.com>
To: barebox@lists.infradead.org
Subject: [PATCH 09/10] beautify PHY driver names
Date: Fri, 30 May 2014 11:07:35 +0200 [thread overview]
Message-ID: <1401440856-6145-10-git-send-email-holgerschurig@gmail.com> (raw)
In-Reply-To: <1401440856-6145-1-git-send-email-holgerschurig@gmail.com>
Some device names where texts like "Atheros 8035 ethernet" or similar. They
now got a prefix "phy-" and just their name and look now much more like the
other driver names.
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
---
drivers/net/phy/at803x.c | 6 +++---
drivers/net/phy/lxt.c | 2 +-
drivers/net/phy/micrel.c | 18 +++++++++---------
drivers/net/phy/national.c | 2 +-
drivers/net/phy/phy.c | 2 +-
drivers/net/phy/smsc.c | 10 +++++-----
6 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index a244c87..a7b3ece 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -88,7 +88,7 @@ static struct phy_driver at803x_driver[] = {
/* ATHEROS 8035 */
.phy_id = 0x004dd072,
.phy_id_mask = 0xffffffef,
- .drv.name = "Atheros 8035 ethernet",
+ .drv.name = "phy-ath8035",
.config_init = at803x_config_init,
.features = PHY_GBIT_FEATURES,
.config_aneg = &genphy_config_aneg,
@@ -97,7 +97,7 @@ static struct phy_driver at803x_driver[] = {
/* ATHEROS 8030 */
.phy_id = 0x004dd076,
.phy_id_mask = 0xffffffef,
- .drv.name = "Atheros 8030 ethernet",
+ .drv.name = "phy-ath8030",
.config_init = at803x_config_init,
.features = PHY_GBIT_FEATURES,
.config_aneg = &genphy_config_aneg,
@@ -106,7 +106,7 @@ static struct phy_driver at803x_driver[] = {
/* ATHEROS 8031 */
.phy_id = 0x004dd074,
.phy_id_mask = 0xffffffef,
- .drv.name = "Atheros 8031 ethernet",
+ .drv.name = "phy-ath8031",
.config_init = at803x_config_init,
.features = PHY_GBIT_FEATURES,
.config_aneg = &genphy_config_aneg,
diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c
index 9e5ddbb..3ec5299 100644
--- a/drivers/net/phy/lxt.c
+++ b/drivers/net/phy/lxt.c
@@ -19,7 +19,7 @@ static struct phy_driver lxt97x_driver[] = {
{
.phy_id = 0x001378e0,
.phy_id_mask = 0xfffffff0,
- .drv.name = "LXT971",
+ .drv.name = "phy-lxt971",
.features = PHY_BASIC_FEATURES,
} };
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 8aea653..cf4ee77 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -191,7 +191,7 @@ static struct phy_driver ksphy_driver[] = {
{
.phy_id = PHY_ID_KS8737,
.phy_id_mask = 0x00fffff0,
- .drv.name = "Micrel KS8737",
+ .drv.name = "phy-ks8737",
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
.config_init = kszphy_config_init,
.config_aneg = genphy_config_aneg,
@@ -199,7 +199,7 @@ static struct phy_driver ksphy_driver[] = {
}, {
.phy_id = PHY_ID_KSZ8021,
.phy_id_mask = 0x00ffffff,
- .drv.name = "Micrel KSZ8021",
+ .drv.name = "phy-ksz8021",
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause |
SUPPORTED_Asym_Pause),
.config_init = ksz8021_config_init,
@@ -208,7 +208,7 @@ static struct phy_driver ksphy_driver[] = {
}, {
.phy_id = PHY_ID_KSZ8031,
.phy_id_mask = 0x00ffffff,
- .drv.name = "Micrel KSZ8031",
+ .drv.name = "phy-ksz8031",
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause |
SUPPORTED_Asym_Pause),
.config_init = ksz8021_config_init,
@@ -217,7 +217,7 @@ static struct phy_driver ksphy_driver[] = {
}, {
.phy_id = PHY_ID_KSZ8041,
.phy_id_mask = 0x00fffff0,
- .drv.name = "Micrel KSZ8041",
+ .drv.name = "phy-ksz8041",
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
| SUPPORTED_Asym_Pause),
.config_init = kszphy_config_init,
@@ -226,7 +226,7 @@ static struct phy_driver ksphy_driver[] = {
}, {
.phy_id = PHY_ID_KSZ8051,
.phy_id_mask = 0x00fffff0,
- .drv.name = "Micrel KSZ8051",
+ .drv.name = "phy-ksz8051",
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
| SUPPORTED_Asym_Pause),
.config_init = ks8051_config_init,
@@ -234,7 +234,7 @@ static struct phy_driver ksphy_driver[] = {
.read_status = genphy_read_status,
}, {
.phy_id = PHY_ID_KSZ8001,
- .drv.name = "Micrel KSZ8001 or KS8721",
+ .drv.name = "phy-ksz8001-ks8721",
.phy_id_mask = 0x00ffffff,
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
.config_init = kszphy_config_init,
@@ -248,7 +248,7 @@ static struct phy_driver ksphy_driver[] = {
*/
.phy_id = PHY_ID_KSZ9021,
.phy_id_mask = 0x000ffffe,
- .drv.name = "Micrel KSZ9021 Gigabit PHY",
+ .drv.name = "phy-ksz9021",
.features = (PHY_GBIT_FEATURES | SUPPORTED_Pause),
.config_init = ksz9021_config_init,
.config_aneg = genphy_config_aneg,
@@ -256,7 +256,7 @@ static struct phy_driver ksphy_driver[] = {
}, {
.phy_id = PHY_ID_KSZ9031,
.phy_id_mask = 0x00fffff0,
- .drv.name = "Micrel KSZ9031 Gigabit PHY",
+ .drv.name = "phy-ksz9031",
.features = (PHY_GBIT_FEATURES | SUPPORTED_Pause
| SUPPORTED_Asym_Pause),
.config_init = kszphy_config_init,
@@ -265,7 +265,7 @@ static struct phy_driver ksphy_driver[] = {
}, {
.phy_id = PHY_ID_KSZ8873MLL,
.phy_id_mask = 0x00fffff0,
- .drv.name = "Micrel KSZ8873MLL Switch",
+ .drv.name = "phy-ksz8873mll",
.features = (SUPPORTED_Pause | SUPPORTED_Asym_Pause),
.config_init = ksz8873mll_config_init,
.config_aneg = ksz8873mll_config_aneg,
diff --git a/drivers/net/phy/national.c b/drivers/net/phy/national.c
index e46d587..83374ec 100644
--- a/drivers/net/phy/national.c
+++ b/drivers/net/phy/national.c
@@ -82,7 +82,7 @@ static int ns_config_init(struct phy_device *phydev)
static struct phy_driver dp83865_driver = {
.phy_id = 0x20005c70,
.phy_id_mask = 0xfffffff0,
- .drv.name = "NatSemi DP83865",
+ .drv.name = "phy-dp83865",
.features = PHY_GBIT_FEATURES |
SUPPORTED_Pause | SUPPORTED_Asym_Pause,
.config_init = ns_config_init,
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 1a2fdf1..aef9350 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -855,7 +855,7 @@ int phy_init_hw(struct phy_device *phydev)
}
static struct phy_driver genphy_driver = {
- .drv.name = "Generic PHY",
+ .drv.name = "phy-generic",
.phy_id = PHY_ANY_UID,
.phy_id_mask = PHY_ANY_UID,
.features = PHY_GBIT_FEATURES | SUPPORTED_MII |
diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index a318624..e540754 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -80,7 +80,7 @@ static struct phy_driver smsc_phy_driver[] = {
{
.phy_id = 0x0007c0a0, /* OUI=0x00800f, Model#=0x0a */
.phy_id_mask = 0xfffffff0,
- .drv.name = "SMSC LAN83C185",
+ .drv.name = "phy-lan83c185",
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
| SUPPORTED_Asym_Pause),
@@ -92,7 +92,7 @@ static struct phy_driver smsc_phy_driver[] = {
}, {
.phy_id = 0x0007c0b0, /* OUI=0x00800f, Model#=0x0b */
.phy_id_mask = 0xfffffff0,
- .drv.name = "SMSC LAN8187",
+ .drv.name = "phy-lan8187",
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
| SUPPORTED_Asym_Pause),
@@ -104,7 +104,7 @@ static struct phy_driver smsc_phy_driver[] = {
}, {
.phy_id = 0x0007c0c0, /* OUI=0x00800f, Model#=0x0c */
.phy_id_mask = 0xfffffff0,
- .drv.name = "SMSC LAN8700",
+ .drv.name = "phy-lan8700",
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
| SUPPORTED_Asym_Pause),
@@ -116,7 +116,7 @@ static struct phy_driver smsc_phy_driver[] = {
}, {
.phy_id = 0x0007c0d0, /* OUI=0x00800f, Model#=0x0d */
.phy_id_mask = 0xfffffff0,
- .drv.name = "SMSC LAN911x Internal PHY",
+ .drv.name = "phy-lan911x",
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
| SUPPORTED_Asym_Pause),
@@ -128,7 +128,7 @@ static struct phy_driver smsc_phy_driver[] = {
}, {
.phy_id = 0x0007c0f0, /* OUI=0x00800f, Model#=0x0f */
.phy_id_mask = 0xfffffff0,
- .drv.name = "SMSC LAN8710/LAN8720",
+ .drv.name = "phy-lan8710",
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
| SUPPORTED_Asym_Pause),
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2014-05-30 9:02 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-30 9:07 [PATCH 00/10] miscelleanous beautification patches Holger Schurig
2014-05-30 9:05 ` Holger Schurig
2014-05-30 9:07 ` [PATCH 01/10] drvlist: factor the driver list out of 'devinfo' Holger Schurig
2014-05-30 9:09 ` Holger Schurig
2014-05-30 9:07 ` [PATCH 02/10] devinfo: reduce indentation Holger Schurig
2014-05-30 9:08 ` Holger Schurig
2014-05-30 9:49 ` Antony Pavlov
2014-05-30 9:07 ` [PATCH 03/10] devinfo: make the output of "devinfo DEVICE" nicer Holger Schurig
2014-05-30 9:07 ` Holger Schurig
2014-06-02 8:19 ` Juergen Borleis
2014-06-02 9:23 ` Holger Schurig
2014-06-02 10:09 ` Juergen Borleis
2014-06-02 10:28 ` Holger Schurig
2014-05-30 9:07 ` [PATCH 04/10] parameters: only show possible enumerations if there are any Holger Schurig
2014-05-30 9:09 ` Holger Schurig
2014-05-30 9:07 ` [PATCH 05/10] net: show enetaddr in lowercase Holger Schurig
2014-05-30 9:07 ` [PATCH 06/10] meminfo: purely cosmetical changes Holger Schurig
2014-05-30 9:43 ` Antony Pavlov
2014-05-30 9:37 ` Holger Schurig
2014-05-30 9:07 ` [PATCH 07/10] misc: upper-case some abbreviations Holger Schurig
2014-05-30 9:07 ` [PATCH 08/10] bootm: beautify output Holger Schurig
2014-05-30 9:06 ` Holger Schurig
2014-05-30 9:07 ` Holger Schurig [this message]
2014-05-30 9:17 ` [PATCH 09/10] beautify PHY driver names Alexander Aring
2014-05-30 9:30 ` Holger Schurig
2014-05-30 10:03 ` Alexander Aring
2014-06-02 6:59 ` Sascha Hauer
2014-05-30 9:07 ` [PATCH 10/10] device drivers: harmonize underscore in " Holger Schurig
2014-06-02 7:16 ` Sascha Hauer
2014-06-02 7:21 ` [PATCH 00/10] miscelleanous beautification patches Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1401440856-6145-10-git-send-email-holgerschurig@gmail.com \
--to=holgerschurig@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox