From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-lb0-x234.google.com ([2a00:1450:4010:c04::234]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1Wsp7a-00024L-0z for barebox@lists.infradead.org; Fri, 06 Jun 2014 08:03:33 +0000 Received: by mail-lb0-f180.google.com with SMTP id p9so1274340lbv.39 for ; Fri, 06 Jun 2014 01:03:07 -0700 (PDT) From: Antony Pavlov Date: Fri, 6 Jun 2014 12:02:57 +0400 Message-Id: <1402041777-7249-1-git-send-email-antonynpavlov@gmail.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [RFC] [WIP] net: add initial ENC28J60 support To: barebox@lists.infradead.org ENC28J60 is a stand-alone Ethernet controller with SPI Interface. and integrated 10BASE-T PHY. This driver was ported with maximum original linux driver source code compatibility in mind so locked_* and nolock_* register handling functions are kept (despite the fact that barebox does not use any coherency primitives at all). The most notable barebox driver version changes: * add device tree support; * use two SPI transfers in spi_read_buf() (as m25p80.c does); * use IF_ENABLED for checking CONFIG_ENC28J60_WRITEVERIFY. TODOs: * move include/linux/netdevice.h to separate patch; * move ETH_ALEN and eth_random_addr to common code (or use existing barebox analogs); * do we really need 'select CRC32'? * fix empty enc28j60_init_dev; * add parameter for changing debug loglevel on-the-run; * ENC28J60 supports only SPI mode 0 so we have to submit this information to the SPI controller explicitly. Signed-off-by: Antony Pavlov --- drivers/net/Kconfig | 14 + drivers/net/Makefile | 1 + drivers/net/enc28j60.c | 1092 +++++++++++++++++++++++++++++++++++++++++++++ drivers/net/enc28j60_hw.h | 307 +++++++++++++ include/linux/netdevice.h | 53 +++ 5 files changed, 1467 insertions(+) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 10843d0..02e3b95 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -80,6 +80,20 @@ config DRIVER_NET_DM9K depends on HAS_DM9000 select PHYLIB +config DRIVER_NET_ENC28J60 + bool "ENC28J60 support" + depends on SPI + select CRC32 + ---help--- + Support for the Microchip EN28J60 ethernet chip. + +config DRIVER_NET_ENC28J60_WRITEVERIFY + bool "Enable write verify" + depends on DRIVER_NET_ENC28J60 + ---help--- + Enable the verify after the buffer write useful for debugging purpose. + If unsure, say N. + config DRIVER_NET_EP93XX bool "EP93xx Ethernet driver" depends on ARCH_EP93XX diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 9e1b89b..41fc13f 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_DRIVER_NET_CPSW) += cpsw.o obj-$(CONFIG_DRIVER_NET_DAVINCI_EMAC) += davinci_emac.o obj-$(CONFIG_DRIVER_NET_DESIGNWARE) += designware.o obj-$(CONFIG_DRIVER_NET_DM9K) += dm9k.o +obj-$(CONFIG_DRIVER_NET_ENC28J60) += enc28j60.o obj-$(CONFIG_DRIVER_NET_EP93XX) += ep93xx.o obj-$(CONFIG_DRIVER_NET_ETHOC) += ethoc.o obj-$(CONFIG_DRIVER_NET_FEC_IMX) += fec_imx.o diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c new file mode 100644 index 0000000..0af2b86 --- /dev/null +++ b/drivers/net/enc28j60.c @@ -0,0 +1,1092 @@ +/* + * Microchip ENC28J60 ethernet driver (MAC + PHY) + * + * Copyright (C) 2007 Eurek srl + * Author: Claudio Lanconelli + * based on enc28j60.c written by David Anders for 2.4 kernel version + * + * This code was ported from linux-3.15-rc5 kernel by Antony Pavlov. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "enc28j60_hw.h" + +/* FIXME: move ETH_ALEN and eth_random_addr to common code */ + +/* linux.git/include/uapi/linux/if_ether.h */ +#define ETH_ALEN 6 + +/* linux.git/include/linux/etherdevice.h */ +static inline void eth_random_addr(u8 *addr) +{ + get_random_bytes(addr, ETH_ALEN); + addr[0] &= 0xfe; /* clear multicast bit */ + addr[0] |= 0x02; /* set local assignment bit (IEEE802) */ +} + +#define DRV_NAME "enc28j60" + +#define SPI_OPLEN 1 + +#define ENC28J60_MSG_DEFAULT \ + (NETIF_MSG_PROBE | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN | NETIF_MSG_LINK) + +/* Buffer size required for the largest SPI transfer (i.e., reading a + * frame). */ +#define SPI_TRANSFER_BUF_LEN (4 + MAX_FRAMELEN) + +#define TX_TIMEOUT (4 * HZ) + +/* Max TX retries in case of collision as suggested by errata datasheet */ +#define MAX_TX_RETRYCOUNT 16 + +/* Driver local data */ +struct enc28j60_net { + struct eth_device edev; + struct spi_device *spi; + u8 bank; /* current register bank selected */ + u16 next_pk_ptr; /* next packet pointer within FIFO */ + u16 max_pk_counter; /* statistics: max packet counter */ + u16 tx_retry_count; + bool hw_enable; + bool full_duplex; + int rxfilter; + u32 msg_enable; + u8 spi_transfer_buf[SPI_TRANSFER_BUF_LEN]; + /* store MAC address here while hardware is in the reset state */ + u8 hwaddr[ETH_ALEN]; +}; + +/* + * SPI read buffer + * wait for the SPI transfer and copy received data to destination + */ +static int +spi_read_buf(struct enc28j60_net *priv, int len, u8 *data) +{ + u8 *rx_buf = priv->spi_transfer_buf + 4; + u8 *tx_buf = priv->spi_transfer_buf; + struct spi_transfer t[2]; + struct spi_message msg; + int ret; + + spi_message_init(&msg); + memset(t, 0, (sizeof t)); + + tx_buf[0] = ENC28J60_READ_BUF_MEM; + t[0].tx_buf = tx_buf; + t[0].len = 1; + spi_message_add_tail(&t[0], &msg); + + t[1].rx_buf = rx_buf; + t[1].len = len; + spi_message_add_tail(&t[1], &msg); + + ret = spi_sync(priv->spi, &msg); + if (ret == 0) { + memcpy(data, rx_buf, len); + ret = msg.status; + } + if (ret && netif_msg_drv(priv)) + printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n", + __func__, ret); + + return ret; +} + +/* + * SPI write buffer + */ +static int spi_write_buf(struct enc28j60_net *priv, int len, + const u8 *data) +{ + int ret; + + if (len > SPI_TRANSFER_BUF_LEN - 1 || len <= 0) + ret = -EINVAL; + else { + priv->spi_transfer_buf[0] = ENC28J60_WRITE_BUF_MEM; + memcpy(&priv->spi_transfer_buf[1], data, len); + ret = spi_write(priv->spi, priv->spi_transfer_buf, len + 1); + if (ret && netif_msg_drv(priv)) + printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n", + __func__, ret); + } + return ret; +} + +/* + * basic SPI read operation + */ +static u8 spi_read_op(struct enc28j60_net *priv, u8 op, + u8 addr) +{ + u8 tx_buf[2]; + u8 rx_buf[4]; + u8 val = 0; + int ret; + int slen = SPI_OPLEN; + + /* do dummy read if needed */ + if (addr & SPRD_MASK) + slen++; + + tx_buf[0] = op | (addr & ADDR_MASK); + ret = spi_write_then_read(priv->spi, tx_buf, 1, rx_buf, slen); + if (ret) + printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n", + __func__, ret); + else + val = rx_buf[slen - 1]; + + return val; +} + +/* + * basic SPI write operation + */ +static int spi_write_op(struct enc28j60_net *priv, u8 op, + u8 addr, u8 val) +{ + int ret; + + priv->spi_transfer_buf[0] = op | (addr & ADDR_MASK); + priv->spi_transfer_buf[1] = val; + ret = spi_write(priv->spi, priv->spi_transfer_buf, 2); + if (ret && netif_msg_drv(priv)) + printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n", + __func__, ret); + return ret; +} + +static void enc28j60_soft_reset(struct enc28j60_net *priv) +{ + if (netif_msg_hw(priv)) + printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__); + + spi_write_op(priv, ENC28J60_SOFT_RESET, 0, ENC28J60_SOFT_RESET); + /* Errata workaround #1, CLKRDY check is unreliable, + * delay at least 1 mS instead */ + udelay(2000); +} + +/* + * select the current register bank if necessary + */ +static void enc28j60_set_bank(struct enc28j60_net *priv, u8 addr) +{ + u8 b = (addr & BANK_MASK) >> 5; + + /* These registers (EIE, EIR, ESTAT, ECON2, ECON1) + * are present in all banks, no need to switch bank + */ + if (addr >= EIE && addr <= ECON1) + return; + + /* Clear or set each bank selection bit as needed */ + if ((b & ECON1_BSEL0) != (priv->bank & ECON1_BSEL0)) { + if (b & ECON1_BSEL0) + spi_write_op(priv, ENC28J60_BIT_FIELD_SET, ECON1, + ECON1_BSEL0); + else + spi_write_op(priv, ENC28J60_BIT_FIELD_CLR, ECON1, + ECON1_BSEL0); + } + if ((b & ECON1_BSEL1) != (priv->bank & ECON1_BSEL1)) { + if (b & ECON1_BSEL1) + spi_write_op(priv, ENC28J60_BIT_FIELD_SET, ECON1, + ECON1_BSEL1); + else + spi_write_op(priv, ENC28J60_BIT_FIELD_CLR, ECON1, + ECON1_BSEL1); + } + priv->bank = b; +} + +/* + * Register access routines through the SPI bus. + * Every register access comes in two flavours: + * - nolock_xxx: caller needs to invoke mutex_lock, usually to access + * atomically more than one register + * - locked_xxx: caller doesn't need to invoke mutex_lock, single access + * + * Some registers can be accessed through the bit field clear and + * bit field set to avoid a read modify write cycle. + */ + +/* + * Register bit field Set + */ +static void nolock_reg_bfset(struct enc28j60_net *priv, + u8 addr, u8 mask) +{ + enc28j60_set_bank(priv, addr); + spi_write_op(priv, ENC28J60_BIT_FIELD_SET, addr, mask); +} + +static inline void locked_reg_bfset(struct enc28j60_net *priv, + u8 addr, u8 mask) +{ + nolock_reg_bfset(priv, addr, mask); +} + +/* + * Register bit field Clear + */ +static void nolock_reg_bfclr(struct enc28j60_net *priv, + u8 addr, u8 mask) +{ + enc28j60_set_bank(priv, addr); + spi_write_op(priv, ENC28J60_BIT_FIELD_CLR, addr, mask); +} + +static inline void locked_reg_bfclr(struct enc28j60_net *priv, + u8 addr, u8 mask) +{ + nolock_reg_bfclr(priv, addr, mask); +} + +/* + * Register byte read + */ +static int nolock_regb_read(struct enc28j60_net *priv, + u8 address) +{ + enc28j60_set_bank(priv, address); + return spi_read_op(priv, ENC28J60_READ_CTRL_REG, address); +} + +static inline int locked_regb_read(struct enc28j60_net *priv, + u8 address) +{ + int ret; + + ret = nolock_regb_read(priv, address); + + return ret; +} + +/* + * Register word read + */ +static int nolock_regw_read(struct enc28j60_net *priv, + u8 address) +{ + int rl, rh; + + enc28j60_set_bank(priv, address); + rl = spi_read_op(priv, ENC28J60_READ_CTRL_REG, address); + rh = spi_read_op(priv, ENC28J60_READ_CTRL_REG, address + 1); + + return (rh << 8) | rl; +} + +static inline int locked_regw_read(struct enc28j60_net *priv, + u8 address) +{ + int ret; + + ret = nolock_regw_read(priv, address); + + return ret; +} + +/* + * Register byte write + */ +static void nolock_regb_write(struct enc28j60_net *priv, + u8 address, u8 data) +{ + enc28j60_set_bank(priv, address); + spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address, data); +} + +static inline void locked_regb_write(struct enc28j60_net *priv, + u8 address, u8 data) +{ + nolock_regb_write(priv, address, data); +} + +/* + * Register word write + */ +static void nolock_regw_write(struct enc28j60_net *priv, + u8 address, u16 data) +{ + enc28j60_set_bank(priv, address); + spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address, (u8) data); + spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address + 1, + (u8) (data >> 8)); +} + +static inline void locked_regw_write(struct enc28j60_net *priv, + u8 address, u16 data) +{ + nolock_regw_write(priv, address, data); +} + +/* + * Buffer memory read + * Select the starting address and execute a SPI buffer read + */ +static void enc28j60_mem_read(struct enc28j60_net *priv, + u16 addr, int len, u8 *data) +{ + nolock_regw_write(priv, ERDPTL, addr); + + if (IS_ENABLED(CONFIG_ENC28J60_WRITEVERIFY) && netif_msg_drv(priv)) { + u16 reg; + reg = nolock_regw_read(priv, ERDPTL); + if (reg != addr) + printk(KERN_DEBUG DRV_NAME ": %s() error writing ERDPT " + "(0x%04x - 0x%04x)\n", __func__, reg, addr); + } + + spi_read_buf(priv, len, data); +} + +/* + * Write packet to enc28j60 TX buffer memory + */ +static void +enc28j60_packet_write(struct enc28j60_net *priv, int len, const u8 *data) +{ + /* Set the write pointer to start of transmit buffer area */ + nolock_regw_write(priv, EWRPTL, TXSTART_INIT); + + if (IS_ENABLED(CONFIG_ENC28J60_WRITEVERIFY) && netif_msg_drv(priv)) { + u16 reg; + reg = nolock_regw_read(priv, EWRPTL); + if (reg != TXSTART_INIT) + printk(KERN_DEBUG DRV_NAME + ": %s() ERWPT:0x%04x != 0x%04x\n", + __func__, reg, TXSTART_INIT); + } + /* Set the TXND pointer to correspond to the packet size given */ + nolock_regw_write(priv, ETXNDL, TXSTART_INIT + len); + /* write per-packet control byte */ + spi_write_op(priv, ENC28J60_WRITE_BUF_MEM, 0, 0x00); + if (netif_msg_hw(priv)) + printk(KERN_DEBUG DRV_NAME + ": %s() after control byte ERWPT:0x%04x\n", + __func__, nolock_regw_read(priv, EWRPTL)); + /* copy the packet into the transmit buffer */ + spi_write_buf(priv, len, data); + if (netif_msg_hw(priv)) + printk(KERN_DEBUG DRV_NAME + ": %s() after write packet ERWPT:0x%04x, len=%d\n", + __func__, nolock_regw_read(priv, EWRPTL), len); +} + +static int poll_ready(struct enc28j60_net *priv, u8 reg, u8 mask, u8 val) +{ + if ((nolock_regb_read(priv, reg) & mask) == val) { + return 0; + } + + /* 20 msec timeout read */ + mdelay(20); + + if ((nolock_regb_read(priv, reg) & mask) != val) { + dev_dbg(&priv->spi->dev, + "reg %02x ready timeout!\n", reg); + return -ETIMEDOUT; + } + + return 0; +} + +/* + * Wait until the PHY operation is complete. + */ +static int wait_phy_ready(struct enc28j60_net *priv) +{ + return poll_ready(priv, MISTAT, MISTAT_BUSY, 0) ? 0 : 1; +} + +/* + * PHY register read + * PHY registers are not accessed directly, but through the MII + */ +static u16 enc28j60_phy_read(struct enc28j60_net *priv, u8 address) +{ + u16 ret; + + /* set the PHY register address */ + nolock_regb_write(priv, MIREGADR, address); + /* start the register read operation */ + nolock_regb_write(priv, MICMD, MICMD_MIIRD); + /* wait until the PHY read completes */ + wait_phy_ready(priv); + /* quit reading */ + nolock_regb_write(priv, MICMD, 0x00); + /* return the data */ + ret = nolock_regw_read(priv, MIRDL); + + return ret; +} + +static int enc28j60_phy_write(struct enc28j60_net *priv, u8 address, u16 data) +{ + int ret; + + /* set the PHY register address */ + nolock_regb_write(priv, MIREGADR, address); + /* write the PHY data */ + nolock_regw_write(priv, MIWRL, data); + /* wait until the PHY write completes and return */ + ret = wait_phy_ready(priv); + + return ret; +} + +static int enc28j60_get_ethaddr(struct eth_device *edev, unsigned char *m) +{ + struct enc28j60_net *priv = edev->priv; + + memcpy(m, priv->hwaddr, ETH_ALEN); + + if (netif_msg_drv(priv)) + printk(KERN_ERR DRV_NAME + ": %s: getting MAC address\n", + edev->dev.name); + + return 0; +} + +/* + * Program the hardware MAC address from dev->dev_addr. + */ +static int enc28j60_set_ethaddr(struct eth_device *edev, + unsigned char *mac_addr) +{ + int ret; + struct enc28j60_net *priv = edev->priv; + + if (!priv->hw_enable) { + if (netif_msg_drv(priv)) + printk(KERN_ERR DRV_NAME + ": %s: Setting MAC address to %pM\n", + edev->dev.name, mac_addr); + /* NOTE: MAC address in ENC28J60 is byte-backward */ + nolock_regb_write(priv, MAADR5, mac_addr[0]); + nolock_regb_write(priv, MAADR4, mac_addr[1]); + nolock_regb_write(priv, MAADR3, mac_addr[2]); + nolock_regb_write(priv, MAADR2, mac_addr[3]); + nolock_regb_write(priv, MAADR1, mac_addr[4]); + nolock_regb_write(priv, MAADR0, mac_addr[5]); + ret = 0; + memcpy(priv->hwaddr, mac_addr, ETH_ALEN); + } else { + if (netif_msg_drv(priv)) + printk(KERN_DEBUG DRV_NAME + ": %s() Hardware must be disabled to set " + "Mac address\n", __func__); + ret = -EBUSY; + } + + return ret; +} + +/* + * Debug routine to dump useful register contents + */ +static void enc28j60_dump_regs(struct enc28j60_net *priv, const char *msg) +{ + printk(KERN_DEBUG DRV_NAME " %s\n" + "HwRevID: 0x%02x\n" + "Cntrl: ECON1 ECON2 ESTAT EIR EIE\n" + " 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x\n" + "MAC : MACON1 MACON3 MACON4\n" + " 0x%02x 0x%02x 0x%02x\n" + "Rx : ERXST ERXND ERXWRPT ERXRDPT ERXFCON EPKTCNT MAMXFL\n" + " 0x%04x 0x%04x 0x%04x 0x%04x " + "0x%02x 0x%02x 0x%04x\n" + "Tx : ETXST ETXND MACLCON1 MACLCON2 MAPHSUP\n" + " 0x%04x 0x%04x 0x%02x 0x%02x 0x%02x\n", + msg, nolock_regb_read(priv, EREVID), + nolock_regb_read(priv, ECON1), nolock_regb_read(priv, ECON2), + nolock_regb_read(priv, ESTAT), nolock_regb_read(priv, EIR), + nolock_regb_read(priv, EIE), nolock_regb_read(priv, MACON1), + nolock_regb_read(priv, MACON3), nolock_regb_read(priv, MACON4), + nolock_regw_read(priv, ERXSTL), nolock_regw_read(priv, ERXNDL), + nolock_regw_read(priv, ERXWRPTL), + nolock_regw_read(priv, ERXRDPTL), + nolock_regb_read(priv, ERXFCON), + nolock_regb_read(priv, EPKTCNT), + nolock_regw_read(priv, MAMXFLL), nolock_regw_read(priv, ETXSTL), + nolock_regw_read(priv, ETXNDL), + nolock_regb_read(priv, MACLCON1), + nolock_regb_read(priv, MACLCON2), + nolock_regb_read(priv, MAPHSUP)); +} + +/* + * ERXRDPT need to be set always at odd addresses, refer to errata datasheet + */ +static u16 erxrdpt_workaround(u16 next_packet_ptr, u16 start, u16 end) +{ + u16 erxrdpt; + + if ((next_packet_ptr - 1 < start) || (next_packet_ptr - 1 > end)) + erxrdpt = end; + else + erxrdpt = next_packet_ptr - 1; + + return erxrdpt; +} + +/* + * Calculate wrap around when reading beyond the end of the RX buffer + */ +static u16 rx_packet_start(u16 ptr) +{ + if (ptr + RSV_SIZE > RXEND_INIT) + return (ptr + RSV_SIZE) - (RXEND_INIT - RXSTART_INIT + 1); + else + return ptr + RSV_SIZE; +} + +static void nolock_rxfifo_init(struct enc28j60_net *priv, u16 start, u16 end) +{ + u16 erxrdpt; + + if (start > 0x1FFF || end > 0x1FFF || start > end) { + if (netif_msg_drv(priv)) + printk(KERN_ERR DRV_NAME ": %s(%d, %d) RXFIFO " + "bad parameters!\n", __func__, start, end); + return; + } + /* set receive buffer start + end */ + priv->next_pk_ptr = start; + nolock_regw_write(priv, ERXSTL, start); + erxrdpt = erxrdpt_workaround(priv->next_pk_ptr, start, end); + nolock_regw_write(priv, ERXRDPTL, erxrdpt); + nolock_regw_write(priv, ERXNDL, end); +} + +static void nolock_txfifo_init(struct enc28j60_net *priv, u16 start, u16 end) +{ + if (start > 0x1FFF || end > 0x1FFF || start > end) { + if (netif_msg_drv(priv)) + printk(KERN_ERR DRV_NAME ": %s(%d, %d) TXFIFO " + "bad parameters!\n", __func__, start, end); + return; + } + /* set transmit buffer start + end */ + nolock_regw_write(priv, ETXSTL, start); + nolock_regw_write(priv, ETXNDL, end); +} + +/* + * Low power mode shrinks power consumption about 100x, so we'd like + * the chip to be in that mode whenever it's inactive. (However, we + * can't stay in lowpower mode during suspend with WOL active.) + */ +static void enc28j60_lowpower(struct enc28j60_net *priv, bool is_low) +{ + if (netif_msg_drv(priv)) + dev_dbg(&priv->spi->dev, "%s power...\n", + is_low ? "low" : "high"); + + if (is_low) { + nolock_reg_bfclr(priv, ECON1, ECON1_RXEN); + poll_ready(priv, ESTAT, ESTAT_RXBUSY, 0); + poll_ready(priv, ECON1, ECON1_TXRTS, 0); + /* ECON2_VRPS was set during initialization */ + nolock_reg_bfset(priv, ECON2, ECON2_PWRSV); + } else { + nolock_reg_bfclr(priv, ECON2, ECON2_PWRSV); + poll_ready(priv, ESTAT, ESTAT_CLKRDY, ESTAT_CLKRDY); + /* caller sets ECON1_RXEN */ + } +} + +static int enc28j60_hw_init(struct enc28j60_net *priv) +{ + u8 reg; + + if (netif_msg_drv(priv)) + printk(KERN_DEBUG DRV_NAME ": %s() - %s\n", __func__, + priv->full_duplex ? "FullDuplex" : "HalfDuplex"); + + /* first reset the chip */ + enc28j60_soft_reset(priv); + /* Clear ECON1 */ + spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, ECON1, 0x00); + priv->bank = 0; + priv->hw_enable = false; + priv->tx_retry_count = 0; + priv->max_pk_counter = 0; + + /* enable address auto increment and voltage regulator powersave */ + nolock_regb_write(priv, ECON2, ECON2_AUTOINC | ECON2_VRPS); + + nolock_rxfifo_init(priv, RXSTART_INIT, RXEND_INIT); + nolock_txfifo_init(priv, TXSTART_INIT, TXEND_INIT); + + /* + * Check the RevID. + * If it's 0x00 or 0xFF probably the enc28j60 is not mounted or + * damaged + */ + reg = locked_regb_read(priv, EREVID); + if (netif_msg_drv(priv)) + printk(KERN_INFO DRV_NAME ": chip RevID: 0x%02x\n", reg); + if (reg == 0x00 || reg == 0xff) { + if (netif_msg_drv(priv)) + printk(KERN_DEBUG DRV_NAME ": %s() Invalid RevId %d\n", + __func__, reg); + return 0; + } + + /* default filter mode: (unicast OR broadcast) AND crc valid */ + locked_regb_write(priv, ERXFCON, + ERXFCON_UCEN | ERXFCON_CRCEN | ERXFCON_BCEN); + + /* enable MAC receive */ + locked_regb_write(priv, MACON1, + MACON1_MARXEN | MACON1_TXPAUS | MACON1_RXPAUS); + /* enable automatic padding and CRC operations */ + if (priv->full_duplex) { + locked_regb_write(priv, MACON3, + MACON3_PADCFG0 | MACON3_TXCRCEN | + MACON3_FRMLNEN | MACON3_FULDPX); + /* set inter-frame gap (non-back-to-back) */ + locked_regb_write(priv, MAIPGL, 0x12); + /* set inter-frame gap (back-to-back) */ + locked_regb_write(priv, MABBIPG, 0x15); + } else { + locked_regb_write(priv, MACON3, + MACON3_PADCFG0 | MACON3_TXCRCEN | + MACON3_FRMLNEN); + locked_regb_write(priv, MACON4, 1 << 6); /* DEFER bit */ + /* set inter-frame gap (non-back-to-back) */ + locked_regw_write(priv, MAIPGL, 0x0C12); + /* set inter-frame gap (back-to-back) */ + locked_regb_write(priv, MABBIPG, 0x12); + } + /* + * MACLCON1 (default) + * MACLCON2 (default) + * Set the maximum packet size which the controller will accept + */ + locked_regw_write(priv, MAMXFLL, MAX_FRAMELEN); + + /* Configure LEDs */ + if (!enc28j60_phy_write(priv, PHLCON, ENC28J60_LAMPS_MODE)) + return 0; + + if (priv->full_duplex) { + if (!enc28j60_phy_write(priv, PHCON1, PHCON1_PDPXMD)) + return 0; + if (!enc28j60_phy_write(priv, PHCON2, 0x00)) + return 0; + } else { + if (!enc28j60_phy_write(priv, PHCON1, 0x00)) + return 0; + if (!enc28j60_phy_write(priv, PHCON2, PHCON2_HDLDIS)) + return 0; + } + + if (netif_msg_hw(priv)) + enc28j60_dump_regs(priv, "Hw initialized."); + + return 1; +} + +static void enc28j60_hw_enable(struct enc28j60_net *priv) +{ + /* enable interrupts */ + if (netif_msg_hw(priv)) + printk(KERN_DEBUG DRV_NAME ": %s()\n", + __func__); + + /* enable receive logic */ + nolock_reg_bfset(priv, ECON1, ECON1_RXEN); + priv->hw_enable = true; +} + +static void enc28j60_hw_disable(struct enc28j60_net *priv) +{ + /* disable interrutps and packet reception */ + nolock_regb_write(priv, EIE, 0x00); + nolock_reg_bfclr(priv, ECON1, ECON1_RXEN); + priv->hw_enable = false; +} + +/* + * Receive Status vector + */ +static void enc28j60_dump_rsv(struct enc28j60_net *priv, const char *msg, + u16 pk_ptr, int len, u16 sts) +{ + printk(KERN_DEBUG DRV_NAME ": %s - NextPk: 0x%04x - RSV:\n", + msg, pk_ptr); + printk(KERN_DEBUG DRV_NAME ": ByteCount: %d, DribbleNibble: %d\n", len, + RSV_GETBIT(sts, RSV_DRIBBLENIBBLE)); + printk(KERN_DEBUG DRV_NAME ": RxOK: %d, CRCErr:%d, LenChkErr: %d," + " LenOutOfRange: %d\n", RSV_GETBIT(sts, RSV_RXOK), + RSV_GETBIT(sts, RSV_CRCERROR), + RSV_GETBIT(sts, RSV_LENCHECKERR), + RSV_GETBIT(sts, RSV_LENOUTOFRANGE)); + printk(KERN_DEBUG DRV_NAME ": Multicast: %d, Broadcast: %d, " + "LongDropEvent: %d, CarrierEvent: %d\n", + RSV_GETBIT(sts, RSV_RXMULTICAST), + RSV_GETBIT(sts, RSV_RXBROADCAST), + RSV_GETBIT(sts, RSV_RXLONGEVDROPEV), + RSV_GETBIT(sts, RSV_CARRIEREV)); + printk(KERN_DEBUG DRV_NAME ": ControlFrame: %d, PauseFrame: %d," + " UnknownOp: %d, VLanTagFrame: %d\n", + RSV_GETBIT(sts, RSV_RXCONTROLFRAME), + RSV_GETBIT(sts, RSV_RXPAUSEFRAME), + RSV_GETBIT(sts, RSV_RXUNKNOWNOPCODE), + RSV_GETBIT(sts, RSV_RXTYPEVLAN)); +} + +static void dump_packet(const char *msg, int len, const char *data) +{ + printk(KERN_DEBUG DRV_NAME ": %s - packet len:%d\n", msg, len); + print_hex_dump(KERN_DEBUG, "pk data: ", DUMP_PREFIX_OFFSET, 16, 1, + data, len, true); +} + +/* + * Hardware transmit function. + * Fill the buffer memory and send the contents of the transmit buffer + * onto the network + */ +static int enc28j60_eth_send(struct eth_device *edev, void *packet, + int packet_length) +{ + struct enc28j60_net *priv = edev->priv; + + if (netif_msg_tx_queued(priv)) + printk(KERN_DEBUG DRV_NAME + ": Tx Packet Len:%d\n", packet_length); + + if (netif_msg_pktdata(priv)) + dump_packet(__func__, + packet_length, packet); + enc28j60_packet_write(priv, packet_length, packet); + + /* readback and verify written data */ + if (IS_ENABLED(CONFIG_ENC28J60_WRITEVERIFY)) { + int test_len, k; + u8 test_buf[64]; /* limit the test to the first 64 bytes */ + int okflag; + + test_len = packet_length; + if (test_len > sizeof(test_buf)) + test_len = sizeof(test_buf); + + /* + 1 to skip control byte */ + enc28j60_mem_read(priv, TXSTART_INIT + 1, test_len, test_buf); + okflag = 1; + for (k = 0; k < test_len; k++) { + if (((u8 *)packet)[k] != test_buf[k]) { + printk(KERN_DEBUG DRV_NAME + ": Error, %d location differ: " + "0x%02x-0x%02x\n", k, + ((u8 *)packet)[k], test_buf[k]); + okflag = 0; + } + } + if (!okflag) + printk(KERN_DEBUG DRV_NAME ": Tx write buffer, " + "verify ERROR!\n"); + } + + /* set TX request flag */ + locked_reg_bfset(priv, ECON1, ECON1_TXRTS); + + return 0; +} + +/* + * Hardware receive function. + * Read the buffer memory, update the FIFO pointer to free the buffer, + * check the status vector and decrement the packet counter. + */ +static void enc28j60_hw_rx(struct eth_device *edev) +{ + struct enc28j60_net *priv = edev->priv; + u16 erxrdpt, next_packet, rxstat; + u8 rsv[RSV_SIZE]; + int len; + + if (netif_msg_rx_status(priv)) + printk(KERN_DEBUG DRV_NAME ": RX pk_addr:0x%04x\n", + priv->next_pk_ptr); + + if (unlikely(priv->next_pk_ptr > RXEND_INIT)) { + if (netif_msg_rx_err(priv)) + dev_err(&edev->dev, + "%s() Invalid packet address!! 0x%04x\n", + __func__, priv->next_pk_ptr); + + /* packet address corrupted: reset RX logic */ + nolock_reg_bfclr(priv, ECON1, ECON1_RXEN); + nolock_reg_bfset(priv, ECON1, ECON1_RXRST); + nolock_reg_bfclr(priv, ECON1, ECON1_RXRST); + nolock_rxfifo_init(priv, RXSTART_INIT, RXEND_INIT); + nolock_reg_bfclr(priv, EIR, EIR_RXERIF); + nolock_reg_bfset(priv, ECON1, ECON1_RXEN); + + return; + } + + /* Read next packet pointer and rx status vector */ + enc28j60_mem_read(priv, priv->next_pk_ptr, sizeof(rsv), rsv); + + next_packet = rsv[1]; + next_packet <<= 8; + next_packet |= rsv[0]; + + len = rsv[3]; + len <<= 8; + len |= rsv[2]; + + rxstat = rsv[5]; + rxstat <<= 8; + rxstat |= rsv[4]; + + if (netif_msg_rx_status(priv)) + enc28j60_dump_rsv(priv, __func__, next_packet, len, rxstat); + + if (!RSV_GETBIT(rxstat, RSV_RXOK) || len > MAX_FRAMELEN) { + if (netif_msg_rx_err(priv)) + dev_err(&edev->dev, "Rx Error (%04x)\n", rxstat); + } else { + /* copy the packet from the receive buffer */ + enc28j60_mem_read(priv, + rx_packet_start(priv->next_pk_ptr), + len, NetRxPackets[0]); + + if (netif_msg_pktdata(priv)) + dump_packet(__func__, len, NetRxPackets[0]); + + net_receive(edev, NetRxPackets[0], len); + } + + /* + * Move the RX read pointer to the start of the next + * received packet. + * This frees the memory we just read out + */ + erxrdpt = erxrdpt_workaround(next_packet, RXSTART_INIT, RXEND_INIT); + if (netif_msg_hw(priv)) + printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT:0x%04x\n", + __func__, erxrdpt); + + nolock_regw_write(priv, ERXRDPTL, erxrdpt); + + if (IS_ENABLED(CONFIG_ENC28J60_WRITEVERIFY) && netif_msg_drv(priv)) { + u16 reg; + reg = nolock_regw_read(priv, ERXRDPTL); + if (reg != erxrdpt) + printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT verify " + "error (0x%04x - 0x%04x)\n", __func__, + reg, erxrdpt); + } + + priv->next_pk_ptr = next_packet; + + /* we are done with this packet, decrement the packet counter */ + nolock_reg_bfset(priv, ECON2, ECON2_PKTDEC); +} + +/* + * Access the PHY to determine link status + */ +static void enc28j60_check_link_status(struct eth_device *edev) +{ + struct enc28j60_net *priv = edev->priv; + u16 reg; + int duplex; + + reg = enc28j60_phy_read(priv, PHSTAT2); + if (netif_msg_hw(priv)) + printk(KERN_DEBUG DRV_NAME ": %s() PHSTAT1: %04x, " + "PHSTAT2: %04x\n", __func__, + enc28j60_phy_read(priv, PHSTAT1), reg); + duplex = reg & PHSTAT2_DPXSTAT; + + if (reg & PHSTAT2_LSTAT) { + if (netif_msg_ifup(priv)) + dev_info(&edev->dev, "link up - %s\n", + duplex ? "Full duplex" : "Half duplex"); + } else { + if (netif_msg_ifdown(priv)) + dev_info(&edev->dev, "link down\n"); + } +} + +static int enc28j60_eth_rx(struct eth_device *edev) +{ + struct enc28j60_net *priv = edev->priv; + int pk_counter; + + pk_counter = locked_regb_read(priv, EPKTCNT); + if (pk_counter && netif_msg_intr(priv)) + printk(KERN_DEBUG DRV_NAME ": intRX, pk_cnt: %d\n", pk_counter); + + if (pk_counter > priv->max_pk_counter) { + priv->max_pk_counter = pk_counter; + if (netif_msg_rx_status(priv) && priv->max_pk_counter > 1) + printk(KERN_DEBUG DRV_NAME ": RX max_pk_cnt: %d\n", + priv->max_pk_counter); + } + + while (pk_counter-- > 0) + enc28j60_hw_rx(edev); + + return 0; +} + +static int enc28j60_init_dev(struct eth_device *edev) +{ + /* FIXME: empty */ + + return 0; +} + +/* + * Open/initialize the board. This is called (in the current kernel) + * sometime after booting when the 'ifconfig' program is run. + * + * This routine should set everything up anew at each open, even + * registers that "should" only need to be set once at boot, so that + * there is non-reboot way to recover if something goes wrong. + */ +static int enc28j60_eth_open(struct eth_device *edev) +{ + struct enc28j60_net *priv = edev->priv; + + if (netif_msg_drv(priv)) + printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__); + + if (!is_valid_ether_addr(priv->hwaddr)) { + if (netif_msg_ifup(priv)) + dev_err(&edev->dev, "invalid MAC address %pM\n", + priv->hwaddr); + return -EADDRNOTAVAIL; + } + + /* Reset the hardware here (and take it out of low power mode) */ + enc28j60_lowpower(priv, false); + enc28j60_hw_disable(priv); + if (!enc28j60_hw_init(priv)) { + if (netif_msg_ifup(priv)) + dev_err(&edev->dev, "hw_reset() failed\n"); + return -EINVAL; + } + + /* Update the MAC address after reset */ + enc28j60_set_ethaddr(edev, priv->hwaddr); + + enc28j60_hw_enable(priv); + + /* check link status */ + enc28j60_check_link_status(edev); + + return 0; +} + +static void enc28j60_eth_halt(struct eth_device *edev) +{ + struct enc28j60_net *priv = edev->priv; + + if (netif_msg_drv(priv)) + printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__); + + enc28j60_hw_disable(priv); + enc28j60_lowpower(priv, true); +} + +static int enc28j60_probe(struct device_d *dev) +{ + struct eth_device *edev; + struct enc28j60_net *priv; + int ret = 0; + + priv = xzalloc(sizeof(*priv)); + + priv->spi = (struct spi_device *)dev->type_data; + //priv->msg_enable = netif_msg_init(16, ENC28J60_MSG_DEFAULT); + priv->msg_enable = netif_msg_init(0, ENC28J60_MSG_DEFAULT); + + edev = &priv->edev; + edev->priv = priv; + edev->init = enc28j60_init_dev; + edev->open = enc28j60_eth_open; + edev->send = enc28j60_eth_send; + edev->recv = enc28j60_eth_rx; + edev->get_ethaddr = enc28j60_get_ethaddr; + edev->set_ethaddr = enc28j60_set_ethaddr; + edev->halt = enc28j60_eth_halt; + edev->parent = dev; + + /* + * Here is a quote from ENC28J60 Data Sheet: + * + * The ENC28J60 does not support automatic duplex + * negotiation. If it is connected to an automatic duplex + * negotiation enabled network switch or Ethernet controller, + * the ENC28J60 will be detected as a half-duplex device. + * + * So most people prefer to set up half-duplex mode. + */ + priv->full_duplex = 0; + + if (!enc28j60_hw_init(priv)) { + if (netif_msg_probe(priv)) + dev_info(dev, DRV_NAME " chip not found\n"); + ret = -EIO; + goto error_register; + } + + eth_random_addr(priv->hwaddr); + enc28j60_set_ethaddr(edev, priv->hwaddr); + + enc28j60_lowpower(priv, true); + + eth_register(edev); + + dev_info(dev, DRV_NAME " driver registered\n"); + + return 0; + +error_register: + return ret; +} + +static __maybe_unused struct of_device_id enc28j60_dt_ids[] = { + { + .compatible = "microchip,enc28j60", + }, { + /* sentinel */ + } +}; + +static struct driver_d enc28j60_driver = { + .name = DRV_NAME, + .probe = enc28j60_probe, + .of_compatible = DRV_OF_COMPAT(enc28j60_dt_ids), +}; +device_spi_driver(enc28j60_driver); diff --git a/drivers/net/enc28j60_hw.h b/drivers/net/enc28j60_hw.h new file mode 100644 index 0000000..4c023c8 --- /dev/null +++ b/drivers/net/enc28j60_hw.h @@ -0,0 +1,307 @@ +/* + * enc28j60_hw.h: EDTP FrameThrower style enc28j60 registers + */ + +#ifndef _ENC28J60_HW_H +#define _ENC28J60_HW_H + +/* + * ENC28J60 Control Registers + * Control register definitions are a combination of address, + * bank number, and Ethernet/MAC/PHY indicator bits. + * - Register address (bits 0-4) + * - Bank number (bits 5-6) + * - MAC/MII indicator (bit 7) + */ +#define ADDR_MASK 0x1F +#define BANK_MASK 0x60 +#define SPRD_MASK 0x80 +/* All-bank registers */ +#define EIE 0x1B +#define EIR 0x1C +#define ESTAT 0x1D +#define ECON2 0x1E +#define ECON1 0x1F +/* Bank 0 registers */ +#define ERDPTL (0x00|0x00) +#define ERDPTH (0x01|0x00) +#define EWRPTL (0x02|0x00) +#define EWRPTH (0x03|0x00) +#define ETXSTL (0x04|0x00) +#define ETXSTH (0x05|0x00) +#define ETXNDL (0x06|0x00) +#define ETXNDH (0x07|0x00) +#define ERXSTL (0x08|0x00) +#define ERXSTH (0x09|0x00) +#define ERXNDL (0x0A|0x00) +#define ERXNDH (0x0B|0x00) +#define ERXRDPTL (0x0C|0x00) +#define ERXRDPTH (0x0D|0x00) +#define ERXWRPTL (0x0E|0x00) +#define ERXWRPTH (0x0F|0x00) +#define EDMASTL (0x10|0x00) +#define EDMASTH (0x11|0x00) +#define EDMANDL (0x12|0x00) +#define EDMANDH (0x13|0x00) +#define EDMADSTL (0x14|0x00) +#define EDMADSTH (0x15|0x00) +#define EDMACSL (0x16|0x00) +#define EDMACSH (0x17|0x00) +/* Bank 1 registers */ +#define EHT0 (0x00|0x20) +#define EHT1 (0x01|0x20) +#define EHT2 (0x02|0x20) +#define EHT3 (0x03|0x20) +#define EHT4 (0x04|0x20) +#define EHT5 (0x05|0x20) +#define EHT6 (0x06|0x20) +#define EHT7 (0x07|0x20) +#define EPMM0 (0x08|0x20) +#define EPMM1 (0x09|0x20) +#define EPMM2 (0x0A|0x20) +#define EPMM3 (0x0B|0x20) +#define EPMM4 (0x0C|0x20) +#define EPMM5 (0x0D|0x20) +#define EPMM6 (0x0E|0x20) +#define EPMM7 (0x0F|0x20) +#define EPMCSL (0x10|0x20) +#define EPMCSH (0x11|0x20) +#define EPMOL (0x14|0x20) +#define EPMOH (0x15|0x20) +#define EWOLIE (0x16|0x20) +#define EWOLIR (0x17|0x20) +#define ERXFCON (0x18|0x20) +#define EPKTCNT (0x19|0x20) +/* Bank 2 registers */ +#define MACON1 (0x00|0x40|SPRD_MASK) +/* #define MACON2 (0x01|0x40|SPRD_MASK) */ +#define MACON3 (0x02|0x40|SPRD_MASK) +#define MACON4 (0x03|0x40|SPRD_MASK) +#define MABBIPG (0x04|0x40|SPRD_MASK) +#define MAIPGL (0x06|0x40|SPRD_MASK) +#define MAIPGH (0x07|0x40|SPRD_MASK) +#define MACLCON1 (0x08|0x40|SPRD_MASK) +#define MACLCON2 (0x09|0x40|SPRD_MASK) +#define MAMXFLL (0x0A|0x40|SPRD_MASK) +#define MAMXFLH (0x0B|0x40|SPRD_MASK) +#define MAPHSUP (0x0D|0x40|SPRD_MASK) +#define MICON (0x11|0x40|SPRD_MASK) +#define MICMD (0x12|0x40|SPRD_MASK) +#define MIREGADR (0x14|0x40|SPRD_MASK) +#define MIWRL (0x16|0x40|SPRD_MASK) +#define MIWRH (0x17|0x40|SPRD_MASK) +#define MIRDL (0x18|0x40|SPRD_MASK) +#define MIRDH (0x19|0x40|SPRD_MASK) +/* Bank 3 registers */ +#define MAADR1 (0x00|0x60|SPRD_MASK) +#define MAADR0 (0x01|0x60|SPRD_MASK) +#define MAADR3 (0x02|0x60|SPRD_MASK) +#define MAADR2 (0x03|0x60|SPRD_MASK) +#define MAADR5 (0x04|0x60|SPRD_MASK) +#define MAADR4 (0x05|0x60|SPRD_MASK) +#define EBSTSD (0x06|0x60) +#define EBSTCON (0x07|0x60) +#define EBSTCSL (0x08|0x60) +#define EBSTCSH (0x09|0x60) +#define MISTAT (0x0A|0x60|SPRD_MASK) +#define EREVID (0x12|0x60) +#define ECOCON (0x15|0x60) +#define EFLOCON (0x17|0x60) +#define EPAUSL (0x18|0x60) +#define EPAUSH (0x19|0x60) +/* PHY registers */ +#define PHCON1 0x00 +#define PHSTAT1 0x01 +#define PHHID1 0x02 +#define PHHID2 0x03 +#define PHCON2 0x10 +#define PHSTAT2 0x11 +#define PHIE 0x12 +#define PHIR 0x13 +#define PHLCON 0x14 + +/* ENC28J60 EIE Register Bit Definitions */ +#define EIE_INTIE 0x80 +#define EIE_PKTIE 0x40 +#define EIE_DMAIE 0x20 +#define EIE_LINKIE 0x10 +#define EIE_TXIE 0x08 +/* #define EIE_WOLIE 0x04 (reserved) */ +#define EIE_TXERIE 0x02 +#define EIE_RXERIE 0x01 +/* ENC28J60 EIR Register Bit Definitions */ +#define EIR_PKTIF 0x40 +#define EIR_DMAIF 0x20 +#define EIR_LINKIF 0x10 +#define EIR_TXIF 0x08 +/* #define EIR_WOLIF 0x04 (reserved) */ +#define EIR_TXERIF 0x02 +#define EIR_RXERIF 0x01 +/* ENC28J60 ESTAT Register Bit Definitions */ +#define ESTAT_INT 0x80 +#define ESTAT_LATECOL 0x10 +#define ESTAT_RXBUSY 0x04 +#define ESTAT_TXABRT 0x02 +#define ESTAT_CLKRDY 0x01 +/* ENC28J60 ECON2 Register Bit Definitions */ +#define ECON2_AUTOINC 0x80 +#define ECON2_PKTDEC 0x40 +#define ECON2_PWRSV 0x20 +#define ECON2_VRPS 0x08 +/* ENC28J60 ECON1 Register Bit Definitions */ +#define ECON1_TXRST 0x80 +#define ECON1_RXRST 0x40 +#define ECON1_DMAST 0x20 +#define ECON1_CSUMEN 0x10 +#define ECON1_TXRTS 0x08 +#define ECON1_RXEN 0x04 +#define ECON1_BSEL1 0x02 +#define ECON1_BSEL0 0x01 +/* ENC28J60 MACON1 Register Bit Definitions */ +#define MACON1_LOOPBK 0x10 +#define MACON1_TXPAUS 0x08 +#define MACON1_RXPAUS 0x04 +#define MACON1_PASSALL 0x02 +#define MACON1_MARXEN 0x01 +/* ENC28J60 MACON2 Register Bit Definitions */ +#define MACON2_MARST 0x80 +#define MACON2_RNDRST 0x40 +#define MACON2_MARXRST 0x08 +#define MACON2_RFUNRST 0x04 +#define MACON2_MATXRST 0x02 +#define MACON2_TFUNRST 0x01 +/* ENC28J60 MACON3 Register Bit Definitions */ +#define MACON3_PADCFG2 0x80 +#define MACON3_PADCFG1 0x40 +#define MACON3_PADCFG0 0x20 +#define MACON3_TXCRCEN 0x10 +#define MACON3_PHDRLEN 0x08 +#define MACON3_HFRMLEN 0x04 +#define MACON3_FRMLNEN 0x02 +#define MACON3_FULDPX 0x01 +/* ENC28J60 MICMD Register Bit Definitions */ +#define MICMD_MIISCAN 0x02 +#define MICMD_MIIRD 0x01 +/* ENC28J60 MISTAT Register Bit Definitions */ +#define MISTAT_NVALID 0x04 +#define MISTAT_SCAN 0x02 +#define MISTAT_BUSY 0x01 +/* ENC28J60 ERXFCON Register Bit Definitions */ +#define ERXFCON_UCEN 0x80 +#define ERXFCON_ANDOR 0x40 +#define ERXFCON_CRCEN 0x20 +#define ERXFCON_PMEN 0x10 +#define ERXFCON_MPEN 0x08 +#define ERXFCON_HTEN 0x04 +#define ERXFCON_MCEN 0x02 +#define ERXFCON_BCEN 0x01 + +/* ENC28J60 PHY PHCON1 Register Bit Definitions */ +#define PHCON1_PRST 0x8000 +#define PHCON1_PLOOPBK 0x4000 +#define PHCON1_PPWRSV 0x0800 +#define PHCON1_PDPXMD 0x0100 +/* ENC28J60 PHY PHSTAT1 Register Bit Definitions */ +#define PHSTAT1_PFDPX 0x1000 +#define PHSTAT1_PHDPX 0x0800 +#define PHSTAT1_LLSTAT 0x0004 +#define PHSTAT1_JBSTAT 0x0002 +/* ENC28J60 PHY PHSTAT2 Register Bit Definitions */ +#define PHSTAT2_TXSTAT (1 << 13) +#define PHSTAT2_RXSTAT (1 << 12) +#define PHSTAT2_COLSTAT (1 << 11) +#define PHSTAT2_LSTAT (1 << 10) +#define PHSTAT2_DPXSTAT (1 << 9) +#define PHSTAT2_PLRITY (1 << 5) +/* ENC28J60 PHY PHCON2 Register Bit Definitions */ +#define PHCON2_FRCLINK 0x4000 +#define PHCON2_TXDIS 0x2000 +#define PHCON2_JABBER 0x0400 +#define PHCON2_HDLDIS 0x0100 +/* ENC28J60 PHY PHIE Register Bit Definitions */ +#define PHIE_PLNKIE (1 << 4) +#define PHIE_PGEIE (1 << 1) +/* ENC28J60 PHY PHIR Register Bit Definitions */ +#define PHIR_PLNKIF (1 << 4) +#define PHIR_PGEIF (1 << 1) + +/* ENC28J60 Packet Control Byte Bit Definitions */ +#define PKTCTRL_PHUGEEN 0x08 +#define PKTCTRL_PPADEN 0x04 +#define PKTCTRL_PCRCEN 0x02 +#define PKTCTRL_POVERRIDE 0x01 + +/* ENC28J60 Transmit Status Vector */ +#define TSV_TXBYTECNT 0 +#define TSV_TXCOLLISIONCNT 16 +#define TSV_TXCRCERROR 20 +#define TSV_TXLENCHKERROR 21 +#define TSV_TXLENOUTOFRANGE 22 +#define TSV_TXDONE 23 +#define TSV_TXMULTICAST 24 +#define TSV_TXBROADCAST 25 +#define TSV_TXPACKETDEFER 26 +#define TSV_TXEXDEFER 27 +#define TSV_TXEXCOLLISION 28 +#define TSV_TXLATECOLLISION 29 +#define TSV_TXGIANT 30 +#define TSV_TXUNDERRUN 31 +#define TSV_TOTBYTETXONWIRE 32 +#define TSV_TXCONTROLFRAME 48 +#define TSV_TXPAUSEFRAME 49 +#define TSV_BACKPRESSUREAPP 50 +#define TSV_TXVLANTAGFRAME 51 + +#define TSV_SIZE 7 +#define TSV_BYTEOF(x) ((x) / 8) +#define TSV_BITMASK(x) (1 << ((x) % 8)) +#define TSV_GETBIT(x, y) (((x)[TSV_BYTEOF(y)] & TSV_BITMASK(y)) ? 1 : 0) + +/* ENC28J60 Receive Status Vector */ +#define RSV_RXLONGEVDROPEV 16 +#define RSV_CARRIEREV 18 +#define RSV_CRCERROR 20 +#define RSV_LENCHECKERR 21 +#define RSV_LENOUTOFRANGE 22 +#define RSV_RXOK 23 +#define RSV_RXMULTICAST 24 +#define RSV_RXBROADCAST 25 +#define RSV_DRIBBLENIBBLE 26 +#define RSV_RXCONTROLFRAME 27 +#define RSV_RXPAUSEFRAME 28 +#define RSV_RXUNKNOWNOPCODE 29 +#define RSV_RXTYPEVLAN 30 + +#define RSV_SIZE 6 +#define RSV_BITMASK(x) (1 << ((x) - 16)) +#define RSV_GETBIT(x, y) (((x) & RSV_BITMASK(y)) ? 1 : 0) + + +/* SPI operation codes */ +#define ENC28J60_READ_CTRL_REG 0x00 +#define ENC28J60_READ_BUF_MEM 0x3A +#define ENC28J60_WRITE_CTRL_REG 0x40 +#define ENC28J60_WRITE_BUF_MEM 0x7A +#define ENC28J60_BIT_FIELD_SET 0x80 +#define ENC28J60_BIT_FIELD_CLR 0xA0 +#define ENC28J60_SOFT_RESET 0xFF + + +/* buffer boundaries applied to internal 8K ram + * entire available packet buffer space is allocated. + * Give TX buffer space for one full ethernet frame (~1500 bytes) + * receive buffer gets the rest */ +#define TXSTART_INIT 0x1A00 +#define TXEND_INIT 0x1FFF + +/* Put RX buffer at 0 as suggested by the Errata datasheet */ +#define RXSTART_INIT 0x0000 +#define RXEND_INIT 0x19FF + +/* maximum ethernet frame length */ +#define MAX_FRAMELEN 1518 + +/* Preferred half duplex: LEDA: Link status LEDB: Rx/Tx activity */ +#define ENC28J60_LAMPS_MODE 0x3476 + +#endif diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h new file mode 100644 index 0000000..4884854 --- /dev/null +++ b/include/linux/netdevice.h @@ -0,0 +1,53 @@ +#ifndef _LINUX_NETDEVICE_H +#define _LINUX_NETDEVICE_H + +/* + * Network interface message level settings + */ + +enum { + NETIF_MSG_DRV = 0x0001, + NETIF_MSG_PROBE = 0x0002, + NETIF_MSG_LINK = 0x0004, + NETIF_MSG_TIMER = 0x0008, + NETIF_MSG_IFDOWN = 0x0010, + NETIF_MSG_IFUP = 0x0020, + NETIF_MSG_RX_ERR = 0x0040, + NETIF_MSG_TX_ERR = 0x0080, + NETIF_MSG_TX_QUEUED = 0x0100, + NETIF_MSG_INTR = 0x0200, + NETIF_MSG_TX_DONE = 0x0400, + NETIF_MSG_RX_STATUS = 0x0800, + NETIF_MSG_PKTDATA = 0x1000, + NETIF_MSG_HW = 0x2000, + NETIF_MSG_WOL = 0x4000, +}; + +#define netif_msg_drv(p) ((p)->msg_enable & NETIF_MSG_DRV) +#define netif_msg_probe(p) ((p)->msg_enable & NETIF_MSG_PROBE) +#define netif_msg_link(p) ((p)->msg_enable & NETIF_MSG_LINK) +#define netif_msg_timer(p) ((p)->msg_enable & NETIF_MSG_TIMER) +#define netif_msg_ifdown(p) ((p)->msg_enable & NETIF_MSG_IFDOWN) +#define netif_msg_ifup(p) ((p)->msg_enable & NETIF_MSG_IFUP) +#define netif_msg_rx_err(p) ((p)->msg_enable & NETIF_MSG_RX_ERR) +#define netif_msg_tx_err(p) ((p)->msg_enable & NETIF_MSG_TX_ERR) +#define netif_msg_tx_queued(p) ((p)->msg_enable & NETIF_MSG_TX_QUEUED) +#define netif_msg_intr(p) ((p)->msg_enable & NETIF_MSG_INTR) +#define netif_msg_tx_done(p) ((p)->msg_enable & NETIF_MSG_TX_DONE) +#define netif_msg_rx_status(p) ((p)->msg_enable & NETIF_MSG_RX_STATUS) +#define netif_msg_pktdata(p) ((p)->msg_enable & NETIF_MSG_PKTDATA) +#define netif_msg_hw(p) ((p)->msg_enable & NETIF_MSG_HW) +#define netif_msg_wol(p) ((p)->msg_enable & NETIF_MSG_WOL) + +static inline u32 netif_msg_init(int debug_value, int default_msg_enable_bits) +{ + /* use default */ + if (debug_value < 0 || debug_value >= (sizeof(u32) * 8)) + return default_msg_enable_bits; + if (debug_value == 0) /* no output */ + return 0; + /* set low N bits */ + return (1 << debug_value) - 1; +} + +#endif /* _LINUX_NETDEVICE_H */ -- 1.9.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox