From: Christoph Fritz <chf.fritz@googlemail.com>
To: barebox@lists.infradead.org
Subject: [RFC][PATCH 00/18] am33x: add musb
Date: Fri, 13 Jun 2014 09:54:17 +0200 [thread overview]
Message-ID: <1402646075-22747-1-git-send-email-chf.fritz@googlemail.com> (raw)
This RFC patchset is intended as a start or reference to get musb support
mainline. So mostly there is no Signed-off-by. This patchset applies to
current barebox and is tested on phytec-phycore-am335x.
If due to mail size restrictions a patch doesn't get through to this
mailinglist, the full patchset is also availible as branch 'musb' at
https://github.com/ch-f/barebox.git
Christoph Fritz (18):
arm: am33xx: add USB clocks
arm: am33xx: add pinmux config for USB
linux wrapper: add more dummy spin_lock stubs
musb: add musb driver from u-boot
musb: delete unused include files
musb: move musb.h to path include/usb
musb: drop gadget support - remove appropriate files
musb: use __BAREBOX__ macro
musb: adapt Kconfig and Makefiles
arm: pcm051: enable musb in defconfig
musb: adapt driver to work on barebox
musb: only support USB_SPEED_HIGH devices
usb: add musb support
arm: am33xx: add usb base addresses
arm: am33xx: add usb platform helper code
musb: add barebox gluecode
arm: pcm051: enable USB pinmux
arm: pcm051: enable USB
arch/arm/boards/phytec-phycore-am335x/board.c | 16 +
arch/arm/configs/am335x_defconfig | 2 +
arch/arm/include/asm/omap_musb.h | 24 +
arch/arm/mach-omap/Makefile | 2 +-
arch/arm/mach-omap/am33xx_clock.c | 7 +
arch/arm/mach-omap/am33xx_mux.c | 24 +
arch/arm/mach-omap/am33xx_usb.c | 65 +
arch/arm/mach-omap/include/mach/am33xx-clock.h | 2 +
arch/arm/mach-omap/include/mach/am33xx-mux.h | 2 +
arch/arm/mach-omap/include/mach/am33xx-silicon.h | 10 +
arch/arm/mach-omap/include/mach/am33xx-usb.h | 11 +
drivers/usb/Kconfig | 2 +
drivers/usb/Makefile | 1 +
drivers/usb/musb/Kconfig | 21 +
drivers/usb/musb/Makefile | 6 +
drivers/usb/musb/linux-compat.h | 69 +
drivers/usb/musb/musb.h | 164 ++
drivers/usb/musb/musb_barebox.c | 306 +++
drivers/usb/musb/musb_core.c | 2502 ++++++++++++++++++++++
drivers/usb/musb/musb_core.h | 605 ++++++
drivers/usb/musb/musb_debug.h | 58 +
drivers/usb/musb/musb_dma.h | 186 ++
drivers/usb/musb/musb_dsps.c | 768 +++++++
drivers/usb/musb/musb_host.c | 2399 +++++++++++++++++++++
drivers/usb/musb/musb_host.h | 114 +
drivers/usb/musb/musb_io.h | 127 ++
drivers/usb/musb/musb_regs.h | 645 ++++++
drivers/usb/musb/usb-compat.h | 88 +
include/linux/barebox-wrapper.h | 2 +
include/usb/usb.h | 62 +
30 files changed, 8289 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/include/asm/omap_musb.h
create mode 100644 arch/arm/mach-omap/am33xx_usb.c
create mode 100644 arch/arm/mach-omap/include/mach/am33xx-usb.h
create mode 100644 drivers/usb/musb/Kconfig
create mode 100644 drivers/usb/musb/Makefile
create mode 100644 drivers/usb/musb/linux-compat.h
create mode 100644 drivers/usb/musb/musb.h
create mode 100644 drivers/usb/musb/musb_barebox.c
create mode 100644 drivers/usb/musb/musb_core.c
create mode 100644 drivers/usb/musb/musb_core.h
create mode 100644 drivers/usb/musb/musb_debug.h
create mode 100644 drivers/usb/musb/musb_dma.h
create mode 100644 drivers/usb/musb/musb_dsps.c
create mode 100644 drivers/usb/musb/musb_host.c
create mode 100644 drivers/usb/musb/musb_host.h
create mode 100644 drivers/usb/musb/musb_io.h
create mode 100644 drivers/usb/musb/musb_regs.h
create mode 100644 drivers/usb/musb/usb-compat.h
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2014-06-13 7:55 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-13 7:54 Christoph Fritz [this message]
2014-06-13 7:54 ` [PATCH 01/18] arm: am33xx: add USB clocks Christoph Fritz
2014-06-13 7:54 ` [PATCH 02/18] arm: am33xx: add pinmux config for USB Christoph Fritz
2014-06-13 7:54 ` [PATCH 03/18] linux wrapper: add more dummy spin_lock stubs Christoph Fritz
2014-06-13 7:54 ` [PATCH 05/18] musb: delete unused include files Christoph Fritz
2014-06-13 7:54 ` [PATCH 06/18] musb: move musb.h to path include/usb Christoph Fritz
2014-06-13 7:54 ` [PATCH 07/18] musb: drop gadget support - remove appropriate files Christoph Fritz
2014-06-13 7:54 ` [PATCH 08/18] musb: use __BAREBOX__ macro Christoph Fritz
2014-06-13 7:54 ` [PATCH 09/18] musb: adapt Kconfig and Makefiles Christoph Fritz
2014-06-13 7:54 ` [PATCH 10/18] arm: pcm051: enable musb in defconfig Christoph Fritz
2014-06-13 7:54 ` [PATCH 11/18] musb: adapt driver to work on barebox Christoph Fritz
2014-06-14 20:53 ` Michael Grzeschik
2014-06-17 9:55 ` Christoph Fritz
2014-06-13 7:54 ` [PATCH 12/18] musb: only support USB_SPEED_HIGH devices Christoph Fritz
2014-06-13 7:54 ` [PATCH 13/18] usb: add musb support Christoph Fritz
2014-06-13 7:54 ` [PATCH 14/18] arm: am33xx: add usb base addresses Christoph Fritz
2014-06-13 7:54 ` [PATCH 15/18] arm: am33xx: add usb platform helper code Christoph Fritz
2014-06-13 7:54 ` [PATCH 16/18] musb: add barebox gluecode Christoph Fritz
2014-06-13 7:54 ` [PATCH 17/18] arm: pcm051: enable USB pinmux Christoph Fritz
2014-06-13 7:54 ` [PATCH 18/18] arm: pcm051: enable USB Christoph Fritz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1402646075-22747-1-git-send-email-chf.fritz@googlemail.com \
--to=chf.fritz@googlemail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox