From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
To: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
barebox@lists.infradead.org, Jason Cooper <jason@lakedaemon.net>,
Andrew Lunn <andrew@lunn.ch>
Subject: [PATCH RFC 0/4] MVEBU SoC full USB support
Date: Wed, 25 Jun 2014 16:08:44 +0200 [thread overview]
Message-ID: <1403705328-9924-1-git-send-email-sebastian.hesselbarth@gmail.com> (raw)
This *RFC* adds a driver stub for ChipIdea USB dual role controllers
found on Marvell MVEBU SoCs. Although, I consider this driver quite
finished, the corresponding DT binding is not. Also, we currently
have no corresponding driver in Linux for both MVEBU CI stub and
USB PHY.
The reason I send it here and now, is to get some input from the
(Linux) MVEBU guys on the binding and functional tests on Armada XP.
While we happily lived some years with ehci-orion ignoring usb-phys
and no usb device support at all on Linux, the situation for barebox
is different, of course. For a boot loader, we desperately need
usb-phy setup (and fixup) and proper DT bindings.
I decided to just add the new binding style to the three board dts
overlays we have for barebox. If we are all happy with it, I'd start
implementing the required Linux driver for usb-phy and CI stub with
mbus setup. As usual, binding docs are missing but I think it is
straight forward from what we know of other SoCs/PHYs already.
I also pushed a branch on barebox/next + a fixup for pinctrl and
the USB patches to
https://github.com/shesselba/barebox-dove.git mvebu/usb
USB host has been tested on all three board obviously, I plan to
test USB device on Dove D3Plug which has an USB device jack, but
similar patches for Marvell Berlin (also CI) worked fine.
Comments?
Sebastian Hesselbarth (4):
usb: add Marvell MVEBU USB support
ARM: dts: add new USB nodes to Kirkwood Guruplug
ARM: dts: add new USB nodes to Dove CuBox
ARM: dts: add new USB nodes to Armada 370 Mirabox
arch/arm/dts/armada-370-mirabox-bb.dts | 35 +++
arch/arm/dts/dove-cubox-bb.dts | 42 +++
arch/arm/dts/kirkwood-guruplug-server-plus-bb.dts | 20 ++
drivers/usb/Kconfig | 1 +
drivers/usb/Makefile | 1 +
drivers/usb/gadget/Kconfig | 4 +-
drivers/usb/mvebu/Kconfig | 35 +++
drivers/usb/mvebu/Makefile | 2 +
drivers/usb/mvebu/core.c | 155 +++++++++++
drivers/usb/mvebu/phy.c | 301 ++++++++++++++++++++++
10 files changed, 594 insertions(+), 2 deletions(-)
create mode 100644 drivers/usb/mvebu/Kconfig
create mode 100644 drivers/usb/mvebu/Makefile
create mode 100644 drivers/usb/mvebu/core.c
create mode 100644 drivers/usb/mvebu/phy.c
---
Cc: barebox@lists.infradead.org
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
--
2.0.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2014-06-25 14:09 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-25 14:08 Sebastian Hesselbarth [this message]
2014-06-25 14:08 ` [PATCH RFC 1/4] usb: add Marvell MVEBU " Sebastian Hesselbarth
2014-06-30 6:30 ` Sascha Hauer
2014-06-30 7:46 ` Sebastian Hesselbarth
2014-06-25 14:08 ` [PATCH RFC 2/4] ARM: dts: add new USB nodes to Kirkwood Guruplug Sebastian Hesselbarth
2014-06-25 14:08 ` [PATCH RFC 3/4] ARM: dts: add new USB nodes to Dove CuBox Sebastian Hesselbarth
2014-06-25 14:08 ` [PATCH RFC 4/4] ARM: dts: add new USB nodes to Armada 370 Mirabox Sebastian Hesselbarth
2014-06-25 19:18 ` [PATCH RFC 0/4] MVEBU SoC full USB support Jason Cooper
2014-06-25 19:27 ` Sebastian Hesselbarth
2014-06-26 12:08 ` Sebastian Hesselbarth
2014-06-25 19:40 ` Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1403705328-9924-1-git-send-email-sebastian.hesselbarth@gmail.com \
--to=sebastian.hesselbarth@gmail.com \
--cc=andrew@lunn.ch \
--cc=barebox@lists.infradead.org \
--cc=jason@lakedaemon.net \
--cc=thomas.petazzoni@free-electrons.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox