From: Antony Pavlov <antonynpavlov@gmail.com>
To: barebox@lists.infradead.org
Cc: "Clément Leger" <cleger@kalray.eu>
Subject: [RFC v3 1/5] PCI: initial commit
Date: Thu, 26 Jun 2014 02:32:14 +0400 [thread overview]
Message-ID: <1403735538-25437-2-git-send-email-antonynpavlov@gmail.com> (raw)
In-Reply-To: <1403735538-25437-1-git-send-email-antonynpavlov@gmail.com>
used shorten version of linux-2.6.39 pci_ids.h
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
drivers/Makefile | 1 +
drivers/pci/Kconfig | 12 ++
drivers/pci/Makefile | 8 ++
drivers/pci/bus.c | 110 ++++++++++++++++
drivers/pci/pci.c | 282 ++++++++++++++++++++++++++++++++++++++++
include/linux/mod_devicetable.h | 20 +++
include/linux/pci.h | 241 ++++++++++++++++++++++++++++++++++
include/linux/pci_ids.h | 136 +++++++++++++++++++
include/linux/pci_regs.h | 118 +++++++++++++++++
9 files changed, 928 insertions(+)
create mode 100644 drivers/pci/Kconfig
create mode 100644 drivers/pci/Makefile
create mode 100644 drivers/pci/bus.c
create mode 100644 drivers/pci/pci.c
create mode 100644 include/linux/mod_devicetable.h
create mode 100644 include/linux/pci.h
create mode 100644 include/linux/pci_ids.h
create mode 100644 include/linux/pci_regs.h
diff --git a/drivers/Makefile b/drivers/Makefile
index ef3604f..1990e86 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -26,3 +26,4 @@ obj-y += pinctrl/
obj-y += bus/
obj-$(CONFIG_REGULATOR) += regulator/
obj-$(CONFIG_RESET_CONTROLLER) += reset/
+obj-$(CONFIG_PCI) += pci/
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
new file mode 100644
index 0000000..88b8dfb
--- /dev/null
+++ b/drivers/pci/Kconfig
@@ -0,0 +1,12 @@
+#
+# PCI configuration
+#
+config PCI_DEBUG
+ bool "PCI Debugging"
+ depends on PCI
+ help
+ Say Y here if you want the PCI core to produce a bunch of debug
+ messages to the system log. Select this if you are having a
+ problem with PCI support and want to see more of what is going on.
+
+ When in doubt, say N.
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
new file mode 100644
index 0000000..c7d43c3
--- /dev/null
+++ b/drivers/pci/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the PCI bus specific drivers.
+#
+obj-y += pci.o bus.o
+
+ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG
+
+CPPFLAGS += $(ccflags-y)
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
new file mode 100644
index 0000000..8215ee5
--- /dev/null
+++ b/drivers/pci/bus.c
@@ -0,0 +1,110 @@
+#include <common.h>
+#include <init.h>
+#include <driver.h>
+#include <linux/pci.h>
+
+/**
+ * pci_match_one_device - Tell if a PCI device structure has a matching
+ * PCI device id structure
+ * @id: single PCI device id structure to match
+ * @dev: the PCI device structure to match against
+ *
+ * Returns the matching pci_device_id structure or %NULL if there is no match.
+ */
+static inline const struct pci_device_id *
+pci_match_one_device(const struct pci_device_id *id, const struct pci_dev *dev)
+{
+ if ((id->vendor == PCI_ANY_ID || id->vendor == dev->vendor) &&
+ (id->device == PCI_ANY_ID || id->device == dev->device) &&
+ (id->subvendor == PCI_ANY_ID || id->subvendor == dev->subsystem_vendor) &&
+ (id->subdevice == PCI_ANY_ID || id->subdevice == dev->subsystem_device) &&
+ !((id->class ^ dev->class) & id->class_mask))
+ return id;
+ return NULL;
+}
+
+static int pci_match(struct device_d *dev, struct driver_d *drv)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct pci_driver *pdrv = to_pci_driver(drv);
+ struct pci_device_id *id;
+
+ for (id = (struct pci_device_id *)pdrv->id_table; id->vendor; id++)
+ if (pci_match_one_device(id, pdev)) {
+ dev->priv = id;
+ return 0;
+ }
+
+ return -1;
+}
+
+static int pci_probe(struct device_d *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct pci_driver *pdrv = to_pci_driver(dev->driver);
+
+ return pdrv->probe(pdev, dev->priv);
+}
+
+static void pci_remove(struct device_d *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct pci_driver *pdrv = to_pci_driver(dev->driver);
+
+ pdrv->remove(pdev);
+}
+
+struct bus_type pci_bus = {
+ .name = "pci",
+ .match = pci_match,
+ .probe = pci_probe,
+ .remove = pci_remove,
+};
+
+static int pci_bus_init(void)
+{
+ return bus_register(&pci_bus);
+}
+pure_initcall(pci_bus_init);
+
+int pci_register_driver(struct pci_driver *pdrv)
+{
+ struct driver_d *drv = &pdrv->driver;
+
+ if (!pdrv->id_table)
+ return -EIO;
+
+ drv->name = pdrv->name;
+ drv->bus = &pci_bus;
+
+ return register_driver(drv);
+}
+
+int pci_register_device(struct pci_dev *pdev)
+{
+ char str[6];
+ struct device_d *dev = &pdev->dev;
+ int ret;
+
+ strcpy(dev->name, "pci");
+ dev->bus = &pci_bus;
+ dev->id = DEVICE_ID_DYNAMIC;
+
+ ret = register_device(dev);
+
+ if (ret)
+ return ret;
+
+ sprintf(str, "%02x", pdev->devfn);
+ dev_add_param_fixed(dev, "devfn", str);
+ sprintf(str, "%04x", (pdev->class >> 8) & 0xffff);
+ dev_add_param_fixed(dev, "class", str);
+ sprintf(str, "%04x", pdev->vendor);
+ dev_add_param_fixed(dev, "vendor", str);
+ sprintf(str, "%04x", pdev->device);
+ dev_add_param_fixed(dev, "device", str);
+ sprintf(str, "%04x", pdev->revision);
+ dev_add_param_fixed(dev, "revision", str);
+
+ return 0;
+}
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
new file mode 100644
index 0000000..9bee73f
--- /dev/null
+++ b/drivers/pci/pci.c
@@ -0,0 +1,282 @@
+#include <common.h>
+#include <linux/pci.h>
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+static struct pci_controller *hose_head, **hose_tail = &hose_head;
+
+struct pci_bus *pci_root;
+
+static struct pci_bus *pci_alloc_bus(void)
+{
+ struct pci_bus *b;
+
+ b = kzalloc(sizeof(*b), GFP_KERNEL);
+ if (b) {
+ INIT_LIST_HEAD(&b->node);
+ INIT_LIST_HEAD(&b->children);
+ INIT_LIST_HEAD(&b->devices);
+ INIT_LIST_HEAD(&b->slots);
+ INIT_LIST_HEAD(&b->resources);
+ }
+ return b;
+}
+
+void register_pci_controller(struct pci_controller *hose)
+{
+ struct pci_bus *bus;
+
+ *hose_tail = hose;
+ hose_tail = &hose->next;
+
+ bus = pci_alloc_bus();
+ hose->bus = bus;
+ bus->ops = hose->pci_ops;
+ bus->resource[0] = hose->mem_resource;
+ bus->resource[1] = hose->io_resource;
+
+ pci_scan_bus(bus);
+
+ pci_root = bus;
+
+ return;
+}
+
+int
+pci_bus_read_config_byte(struct pci_bus *bus, unsigned int devfn, u8 where, u8 *val)
+{
+ u32 data;
+ int status;
+
+ status = bus->ops->read(bus, devfn, where & 0xfc, 4, &data);
+ *val = (u8) (data >> ((where & 3) << 3));
+ return status;
+}
+
+int
+pci_bus_read_config_word(struct pci_bus *bus, unsigned int devfn, u8 where, u16 *val)
+{
+ u32 data;
+ int status;
+
+ status = bus->ops->read(bus, devfn, where & 0xfc, 4, &data);
+ *val = (u16) (data >> ((where & 3) << 3));
+ return status;
+}
+
+int
+pci_bus_read_config_dword(struct pci_bus *bus, unsigned int devfn, u8 where, u32 *val)
+{
+ return bus->ops->read(bus, devfn, where, 4, val);
+}
+
+int
+pci_bus_write_config_byte(struct pci_bus *bus, unsigned int devfn, u8 where, u8 val)
+{
+ u32 data;
+ int status;
+
+ bus->ops->read(bus, devfn, where & 0xfc, 4, &data);
+ data = (data & ~(0xff << ((where & 3) << 3))) | (val << ((where & 3) << 3));
+ status = bus->ops->write(bus, devfn, where & 0xfc, 4, data);
+
+ return status;
+}
+
+int
+pci_bus_write_config_word(struct pci_bus *bus, unsigned int devfn, u8 where, u16 val)
+{
+ u32 data;
+ int status;
+
+ bus->ops->read(bus, devfn, where & 0xfc, 4, &data);
+ data = (data & ~(0xffff << ((where & 3) << 3))) | (val << ((where & 3) << 3));
+ status = bus->ops->write(bus, devfn, where & 0xfc, 4, data);
+
+ return status;
+}
+
+int
+pci_bus_write_config_dword(struct pci_bus *bus, unsigned int devfn, u8 where, u32 val)
+{
+ return bus->ops->write(bus, devfn, where, 4, val);
+}
+
+int
+pci_read_config_byte(struct pci_dev *dev, u8 where, u8 *val)
+{
+ return pci_bus_read_config_byte(dev->bus, dev->devfn, where, val);
+}
+
+int
+pci_read_config_word(struct pci_dev *dev, u8 where, u16 *val)
+{
+ return pci_bus_read_config_word(dev->bus, dev->devfn, where, val);
+}
+
+int
+pci_read_config_dword(struct pci_dev *dev, u8 where, u32 *val)
+{
+ return pci_bus_read_config_dword(dev->bus, dev->devfn, where, val);
+}
+
+int
+pci_write_config_byte(struct pci_dev *dev, u8 where, u8 val)
+{
+ return pci_bus_write_config_byte(dev->bus, dev->devfn, where, val);
+}
+
+int
+pci_write_config_word(struct pci_dev *dev, u8 where, u16 val)
+{
+ return pci_bus_write_config_word(dev->bus, dev->devfn, where, val);
+}
+
+int
+pci_write_config_dword(struct pci_dev *dev, u8 where, u32 val)
+{
+ return pci_bus_write_config_dword(dev->bus, dev->devfn, where, val);
+}
+
+static struct pci_dev *alloc_pci_dev(void)
+{
+ struct pci_dev *dev;
+
+ dev = kzalloc(sizeof(struct pci_dev), GFP_KERNEL);
+ if (!dev)
+ return NULL;
+
+ INIT_LIST_HEAD(&dev->bus_list);
+
+ return dev;
+}
+
+unsigned int pci_scan_bus(struct pci_bus *bus)
+{
+ unsigned int devfn, l, max, class;
+ unsigned char cmd, tmp, hdr_type, is_multi = 0;
+ struct pci_dev *dev;
+ resource_size_t last_mem;
+ resource_size_t last_io;
+
+ /* FIXME: use res_start() */
+ last_mem = bus->resource[0]->start;
+ last_io = bus->resource[1]->start;
+
+ DBG("pci_scan_bus for bus %d\n", bus->number);
+ DBG(" last_io = 0x%08x, last_mem = 0x%08x\n", last_io, last_mem);
+ max = bus->secondary;
+
+ for (devfn = 0; devfn < 0xff; ++devfn) {
+ int bar;
+ u32 old_bar, mask;
+ int size;
+
+ if (PCI_FUNC(devfn) && !is_multi) {
+ /* not a multi-function device */
+ continue;
+ }
+ if (pci_bus_read_config_byte(bus, devfn, PCI_HEADER_TYPE, &hdr_type))
+ continue;
+ if (!PCI_FUNC(devfn))
+ is_multi = hdr_type & 0x80;
+
+ if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, &l) ||
+ /* some broken boards return 0 if a slot is empty: */
+ l == 0xffffffff || l == 0x00000000 || l == 0x0000ffff || l == 0xffff0000)
+ continue;
+
+ dev = alloc_pci_dev();
+ if (!dev)
+ return 0;
+
+ dev->bus = bus;
+ dev->devfn = devfn;
+ dev->vendor = l & 0xffff;
+ dev->device = (l >> 16) & 0xffff;
+
+ /* non-destructively determine if device can be a master: */
+ pci_read_config_byte(dev, PCI_COMMAND, &cmd);
+ pci_write_config_byte(dev, PCI_COMMAND, cmd | PCI_COMMAND_MASTER);
+ pci_read_config_byte(dev, PCI_COMMAND, &tmp);
+ pci_write_config_byte(dev, PCI_COMMAND, cmd);
+
+ pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
+ dev->revision = class & 0xff;
+ class >>= 8; /* upper 3 bytes */
+ dev->class = class;
+ class >>= 8;
+ dev->hdr_type = hdr_type;
+
+ DBG("PCI: class = %08x, hdr_type = %08x\n", class, hdr_type);
+
+ switch (hdr_type & 0x7f) { /* header type */
+ case PCI_HEADER_TYPE_NORMAL: /* standard header */
+ if (class == PCI_CLASS_BRIDGE_PCI)
+ goto bad;
+
+ /*
+ * read base address registers, again pcibios_fixup() can
+ * tweak these
+ */
+ pci_read_config_dword(dev, PCI_ROM_ADDRESS, &l);
+ dev->rom_address = (l == 0xffffffff) ? 0 : l;
+ break;
+ default: /* unknown header */
+ bad:
+ printk(KERN_ERR "PCI: %02x:%02x [%04x/%04x/%06x] has unknown header type %02x, ignoring.\n",
+ bus->number, dev->devfn, dev->vendor, dev->device, class, hdr_type);
+ continue;
+ }
+
+ DBG("PCI: %02x:%02x [%04x/%04x]\n", bus->number, dev->devfn, dev->vendor, dev->device);
+
+ list_add_tail(&dev->bus_list, &bus->devices);
+ pci_register_device(dev);
+
+ if (class == PCI_CLASS_BRIDGE_HOST) {
+ DBG("PCI: skip pci host bridge\n");
+ continue;
+ }
+
+ for (bar = 0; bar < 6; bar++) {
+ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, &old_bar);
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, 0xfffffffe);
+ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, &mask);
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, old_bar);
+
+ if (mask == 0 || mask == 0xffffffff) {
+ DBG(" PCI: pbar%d set bad mask\n", bar);
+ continue;
+ }
+
+ if (mask & 0x01) { /* IO */
+ size = -(mask & 0xfffffffe);
+ DBG(" PCI: pbar%d: mask=%08x io %d bytes\n", bar, mask, size);
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, last_io);
+ last_io += size;
+
+ } else { /* MEM */
+ size = -(mask & 0xfffffff0);
+ DBG(" PCI: pbar%d: mask=%08x memory %d bytes\n", bar, mask, size);
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, last_mem);
+ last_mem += size;
+ }
+ }
+ }
+
+ /*
+ * We've scanned the bus and so we know all about what's on
+ * the other side of any bridges that may be on this bus plus
+ * any devices.
+ *
+ * Return how far we've got finding sub-buses.
+ */
+ DBG("PCI: pci_scan_bus returning with max=%02x\n", max);
+
+ return max;
+}
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
new file mode 100644
index 0000000..c822075
--- /dev/null
+++ b/include/linux/mod_devicetable.h
@@ -0,0 +1,20 @@
+/*
+ * Device tables which are exported to userspace via
+ * scripts/mod/file2alias.c. You must keep that file in sync with this
+ * header.
+ */
+
+#ifndef LINUX_MOD_DEVICETABLE_H
+#define LINUX_MOD_DEVICETABLE_H
+
+#include <linux/types.h>
+
+#define PCI_ANY_ID (~0)
+
+struct pci_device_id {
+ __u32 vendor, device; /* Vendor and device ID or PCI_ANY_ID*/
+ __u32 subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */
+ __u32 class, class_mask; /* (class,subclass,prog-if) triplet */
+};
+
+#endif /* LINUX_MOD_DEVICETABLE_H */
diff --git a/include/linux/pci.h b/include/linux/pci.h
new file mode 100644
index 0000000..1411692
--- /dev/null
+++ b/include/linux/pci.h
@@ -0,0 +1,241 @@
+/*
+ * pci.h
+ *
+ * PCI defines and function prototypes
+ * Copyright 1994, Drew Eckhardt
+ * Copyright 1997--1999 Martin Mares <mj@ucw.cz>
+ *
+ * For more information, please consult the following manuals (look at
+ * http://www.pcisig.com/ for how to get them):
+ *
+ * PCI BIOS Specification
+ * PCI Local Bus Specification
+ * PCI to PCI Bridge Specification
+ * PCI System Design Guide
+ */
+#ifndef LINUX_PCI_H
+#define LINUX_PCI_H
+
+#include <linux/mod_devicetable.h>
+
+#include <linux/pci_regs.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/list.h>
+#include <linux/compiler.h>
+#include <errno.h>
+#include <io.h>
+
+#include <linux/pci_ids.h>
+
+
+/*
+ * The PCI interface treats multi-function devices as independent
+ * devices. The slot/function address of each device is encoded
+ * in a single byte as follows:
+ *
+ * 7:3 = slot
+ * 2:0 = function
+ */
+#define PCI_DEVFN(slot, func) ((((slot) & 0x1f) << 3) | ((func) & 0x07))
+#define PCI_SLOT(devfn) (((devfn) >> 3) & 0x1f)
+#define PCI_FUNC(devfn) ((devfn) & 0x07)
+
+
+/*
+ * Error values that may be returned by PCI functions.
+ */
+#define PCIBIOS_SUCCESSFUL 0x00
+#define PCIBIOS_FUNC_NOT_SUPPORTED 0x81
+#define PCIBIOS_BAD_VENDOR_ID 0x83
+#define PCIBIOS_DEVICE_NOT_FOUND 0x86
+#define PCIBIOS_BAD_REGISTER_NUMBER 0x87
+#define PCIBIOS_SET_FAILED 0x88
+#define PCIBIOS_BUFFER_TOO_SMALL 0x89
+
+#define DEVICE_COUNT_RESOURCE 12
+#define PCI_BRIDGE_RESOURCE_NUM 2
+
+/*
+ * The pci_dev structure is used to describe PCI devices.
+ */
+struct pci_dev {
+ struct list_head bus_list; /* node in per-bus list */
+ struct pci_bus *bus; /* bus this device is on */
+ struct pci_bus *subordinate; /* bus this device bridges to */
+
+ void *sysdata; /* hook for sys-specific extension */
+ struct proc_dir_entry *procent; /* device entry in /proc/bus/pci */
+ struct pci_slot *slot; /* Physical slot this device is in */
+
+ struct device_d dev;
+
+ unsigned int devfn; /* encoded device & function index */
+ unsigned short vendor;
+ unsigned short device;
+ unsigned short subsystem_vendor;
+ unsigned short subsystem_device;
+ unsigned int class; /* 3 bytes: (base,sub,prog-if) */
+ u8 revision; /* PCI revision, low byte of class word */
+ u8 hdr_type; /* PCI header type (`multi' flag masked out) */
+
+ struct resource resource[DEVICE_COUNT_RESOURCE]; /* I/O and memory regions + expansion ROMs */
+
+ /* Base registers for this device, can be adjusted by
+ * pcibios_fixup() as necessary.
+ */
+ unsigned long base_address[6];
+ unsigned long rom_address;
+};
+#define to_pci_dev(dev) container_of(dev, struct pci_dev, dev)
+
+struct pci_bus {
+ struct list_head node; /* node in list of buses */
+ struct pci_bus *parent; /* parent bus this bridge is on */
+ struct list_head children; /* list of child buses */
+ struct list_head devices; /* list of devices on this bus */
+ struct pci_dev *self; /* bridge device as seen by parent */
+ struct list_head slots; /* list of slots on this bus */
+ struct resource *resource[PCI_BRIDGE_RESOURCE_NUM];
+ struct list_head resources; /* address space routed to this bus */
+
+ struct pci_ops *ops; /* configuration access functions */
+ void *sysdata; /* hook for sys-specific extension */
+ struct proc_dir_entry *procdir; /* directory entry in /proc/bus/pci */
+
+ unsigned char number; /* bus number */
+ unsigned char primary; /* number of primary bridge */
+ unsigned char secondary; /* number of secondary bridge */
+ unsigned char subordinate; /* max number of subordinate buses */
+
+ char name[48];
+};
+
+/* Low-level architecture-dependent routines */
+
+struct pci_ops {
+ int (*read)(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val);
+ int (*write)(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val);
+
+ /* return memory address for pci resource */
+ int (*res_start)(struct pci_bus *bus, resource_size_t res_addr);
+};
+
+extern struct pci_ops *pci_ops;
+
+/*
+ * Each pci channel is a top-level PCI bus seem by CPU. A machine with
+ * multiple PCI channels may have multiple PCI host controllers or a
+ * single controller supporting multiple channels.
+ */
+struct pci_controller {
+ struct pci_controller *next;
+ struct pci_bus *bus;
+
+ struct pci_ops *pci_ops;
+ struct resource *mem_resource;
+ unsigned long mem_offset;
+ struct resource *io_resource;
+ unsigned long io_offset;
+ unsigned long io_map_base;
+
+ unsigned int index;
+
+ /* Optional access methods for reading/writing the bus number
+ of the PCI controller */
+ int (*get_busno)(void);
+ void (*set_busno)(int busno);
+};
+
+struct pci_driver {
+ struct list_head node;
+ const char *name;
+ const struct pci_device_id *id_table; /* must be non-NULL for probe to be called */
+ int (*probe) (struct pci_dev *dev, const struct pci_device_id *id); /* New device inserted */
+ void (*remove) (struct pci_dev *dev); /* Device removed (NULL if not a hot-plug capable driver) */
+ struct driver_d driver;
+};
+
+#define to_pci_driver(drv) container_of(drv, struct pci_driver, driver)
+
+/**
+ * DEFINE_PCI_DEVICE_TABLE - macro used to describe a pci device table
+ * @_table: device table name
+ *
+ * This macro is used to create a struct pci_device_id array (a device table)
+ * in a generic manner.
+ */
+#define DEFINE_PCI_DEVICE_TABLE(_table) \
+ const struct pci_device_id _table[]
+
+/**
+ * PCI_DEVICE - macro used to describe a specific pci device
+ * @vend: the 16 bit PCI Vendor ID
+ * @dev: the 16 bit PCI Device ID
+ *
+ * This macro is used to create a struct pci_device_id that matches a
+ * specific device. The subvendor and subdevice fields will be set to
+ * PCI_ANY_ID.
+ */
+#define PCI_DEVICE(vend, dev) \
+ .vendor = (vend), .device = (dev), \
+ .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID
+
+/**
+ * PCI_DEVICE_CLASS - macro used to describe a specific pci device class
+ * @dev_class: the class, subclass, prog-if triple for this device
+ * @dev_class_mask: the class mask for this device
+ *
+ * This macro is used to create a struct pci_device_id that matches a
+ * specific PCI class. The vendor, device, subvendor, and subdevice
+ * fields will be set to PCI_ANY_ID.
+ */
+#define PCI_DEVICE_CLASS(dev_class, dev_class_mask) \
+ .class = (dev_class), .class_mask = (dev_class_mask), \
+ .vendor = PCI_ANY_ID, .device = PCI_ANY_ID, \
+ .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID
+
+/**
+ * PCI_VDEVICE - macro used to describe a specific pci device in short form
+ * @vend: the vendor name
+ * @dev: the 16 bit PCI Device ID
+ *
+ * This macro is used to create a struct pci_device_id that matches a
+ * specific PCI device. The subvendor, and subdevice fields will be set
+ * to PCI_ANY_ID. The macro allows the next field to follow as the device
+ * private data.
+ */
+
+#define PCI_VDEVICE(vend, dev) \
+ .vendor = PCI_VENDOR_ID_##vend, .device = (dev), \
+ .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, 0, 0
+
+int pci_register_driver(struct pci_driver *pdrv);
+int pci_register_device(struct pci_dev *pdev);
+
+extern struct pci_bus *pci_root;
+
+extern unsigned int pci_scan_bus(struct pci_bus *bus);
+extern void register_pci_controller(struct pci_controller *hose);
+
+extern int pci_bus_read_config_byte(struct pci_bus *bus,
+ unsigned int devfn, u8 where, u8 *val);
+extern int pci_bus_read_config_word(struct pci_bus *bus,
+ unsigned int devfn, u8 where, u16 *val);
+extern int pci_bus_read_config_dword(struct pci_bus *bus,
+ unsigned int devfn, u8 where, u32 *val);
+extern int pci_bus_write_config_byte(struct pci_bus *bus,
+ unsigned int devfn, u8 where, u8 val);
+extern int pci_bus_write_config_word(struct pci_bus *bus,
+ unsigned int devfn, u8 where, u16 val);
+extern int pci_bus_write_config_dword(struct pci_bus *bus,
+ unsigned int devfn, u8 where, u32 val);
+
+extern int pci_read_config_byte(struct pci_dev *dev, u8 where, u8 *val);
+extern int pci_read_config_word(struct pci_dev *dev, u8 where, u16 *val);
+extern int pci_read_config_dword(struct pci_dev *dev, u8 where, u32 *val);
+extern int pci_write_config_byte(struct pci_dev *dev, u8 where, u8 val);
+extern int pci_write_config_word(struct pci_dev *dev, u8 where, u16 val);
+extern int pci_write_config_dword(struct pci_dev *dev, u8 where, u32 val);
+
+#endif /* LINUX_PCI_H */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
new file mode 100644
index 0000000..49e2954
--- /dev/null
+++ b/include/linux/pci_ids.h
@@ -0,0 +1,136 @@
+/*
+ * PCI Class, Vendor and Device IDs
+ *
+ * Please keep sorted.
+ *
+ * Do not add new entries to this file unless the definitions
+ * are shared between multiple drivers.
+ */
+
+/* Device classes and subclasses */
+
+#define PCI_CLASS_NOT_DEFINED 0x0000
+#define PCI_CLASS_NOT_DEFINED_VGA 0x0001
+
+#define PCI_BASE_CLASS_STORAGE 0x01
+#define PCI_CLASS_STORAGE_SCSI 0x0100
+#define PCI_CLASS_STORAGE_IDE 0x0101
+#define PCI_CLASS_STORAGE_FLOPPY 0x0102
+#define PCI_CLASS_STORAGE_IPI 0x0103
+#define PCI_CLASS_STORAGE_RAID 0x0104
+#define PCI_CLASS_STORAGE_SATA 0x0106
+#define PCI_CLASS_STORAGE_SATA_AHCI 0x010601
+#define PCI_CLASS_STORAGE_SAS 0x0107
+#define PCI_CLASS_STORAGE_OTHER 0x0180
+
+#define PCI_BASE_CLASS_NETWORK 0x02
+#define PCI_CLASS_NETWORK_ETHERNET 0x0200
+#define PCI_CLASS_NETWORK_TOKEN_RING 0x0201
+#define PCI_CLASS_NETWORK_FDDI 0x0202
+#define PCI_CLASS_NETWORK_ATM 0x0203
+#define PCI_CLASS_NETWORK_OTHER 0x0280
+
+#define PCI_BASE_CLASS_DISPLAY 0x03
+#define PCI_CLASS_DISPLAY_VGA 0x0300
+#define PCI_CLASS_DISPLAY_XGA 0x0301
+#define PCI_CLASS_DISPLAY_3D 0x0302
+#define PCI_CLASS_DISPLAY_OTHER 0x0380
+
+#define PCI_BASE_CLASS_MULTIMEDIA 0x04
+#define PCI_CLASS_MULTIMEDIA_VIDEO 0x0400
+#define PCI_CLASS_MULTIMEDIA_AUDIO 0x0401
+#define PCI_CLASS_MULTIMEDIA_PHONE 0x0402
+#define PCI_CLASS_MULTIMEDIA_OTHER 0x0480
+
+#define PCI_BASE_CLASS_MEMORY 0x05
+#define PCI_CLASS_MEMORY_RAM 0x0500
+#define PCI_CLASS_MEMORY_FLASH 0x0501
+#define PCI_CLASS_MEMORY_OTHER 0x0580
+
+#define PCI_BASE_CLASS_BRIDGE 0x06
+#define PCI_CLASS_BRIDGE_HOST 0x0600
+#define PCI_CLASS_BRIDGE_ISA 0x0601
+#define PCI_CLASS_BRIDGE_EISA 0x0602
+#define PCI_CLASS_BRIDGE_MC 0x0603
+#define PCI_CLASS_BRIDGE_PCI 0x0604
+#define PCI_CLASS_BRIDGE_PCMCIA 0x0605
+#define PCI_CLASS_BRIDGE_NUBUS 0x0606
+#define PCI_CLASS_BRIDGE_CARDBUS 0x0607
+#define PCI_CLASS_BRIDGE_RACEWAY 0x0608
+#define PCI_CLASS_BRIDGE_OTHER 0x0680
+
+#define PCI_BASE_CLASS_COMMUNICATION 0x07
+#define PCI_CLASS_COMMUNICATION_SERIAL 0x0700
+#define PCI_CLASS_COMMUNICATION_PARALLEL 0x0701
+#define PCI_CLASS_COMMUNICATION_MULTISERIAL 0x0702
+#define PCI_CLASS_COMMUNICATION_MODEM 0x0703
+#define PCI_CLASS_COMMUNICATION_OTHER 0x0780
+
+#define PCI_BASE_CLASS_SYSTEM 0x08
+#define PCI_CLASS_SYSTEM_PIC 0x0800
+#define PCI_CLASS_SYSTEM_PIC_IOAPIC 0x080010
+#define PCI_CLASS_SYSTEM_PIC_IOXAPIC 0x080020
+#define PCI_CLASS_SYSTEM_DMA 0x0801
+#define PCI_CLASS_SYSTEM_TIMER 0x0802
+#define PCI_CLASS_SYSTEM_RTC 0x0803
+#define PCI_CLASS_SYSTEM_PCI_HOTPLUG 0x0804
+#define PCI_CLASS_SYSTEM_SDHCI 0x0805
+#define PCI_CLASS_SYSTEM_OTHER 0x0880
+
+#define PCI_BASE_CLASS_INPUT 0x09
+#define PCI_CLASS_INPUT_KEYBOARD 0x0900
+#define PCI_CLASS_INPUT_PEN 0x0901
+#define PCI_CLASS_INPUT_MOUSE 0x0902
+#define PCI_CLASS_INPUT_SCANNER 0x0903
+#define PCI_CLASS_INPUT_GAMEPORT 0x0904
+#define PCI_CLASS_INPUT_OTHER 0x0980
+
+#define PCI_BASE_CLASS_DOCKING 0x0a
+#define PCI_CLASS_DOCKING_GENERIC 0x0a00
+#define PCI_CLASS_DOCKING_OTHER 0x0a80
+
+#define PCI_BASE_CLASS_PROCESSOR 0x0b
+#define PCI_CLASS_PROCESSOR_386 0x0b00
+#define PCI_CLASS_PROCESSOR_486 0x0b01
+#define PCI_CLASS_PROCESSOR_PENTIUM 0x0b02
+#define PCI_CLASS_PROCESSOR_ALPHA 0x0b10
+#define PCI_CLASS_PROCESSOR_POWERPC 0x0b20
+#define PCI_CLASS_PROCESSOR_MIPS 0x0b30
+#define PCI_CLASS_PROCESSOR_CO 0x0b40
+
+#define PCI_BASE_CLASS_SERIAL 0x0c
+#define PCI_CLASS_SERIAL_FIREWIRE 0x0c00
+#define PCI_CLASS_SERIAL_FIREWIRE_OHCI 0x0c0010
+#define PCI_CLASS_SERIAL_ACCESS 0x0c01
+#define PCI_CLASS_SERIAL_SSA 0x0c02
+#define PCI_CLASS_SERIAL_USB 0x0c03
+#define PCI_CLASS_SERIAL_USB_UHCI 0x0c0300
+#define PCI_CLASS_SERIAL_USB_OHCI 0x0c0310
+#define PCI_CLASS_SERIAL_USB_EHCI 0x0c0320
+#define PCI_CLASS_SERIAL_USB_XHCI 0x0c0330
+#define PCI_CLASS_SERIAL_FIBER 0x0c04
+#define PCI_CLASS_SERIAL_SMBUS 0x0c05
+
+#define PCI_BASE_CLASS_WIRELESS 0x0d
+#define PCI_CLASS_WIRELESS_RF_CONTROLLER 0x0d10
+#define PCI_CLASS_WIRELESS_WHCI 0x0d1010
+
+#define PCI_BASE_CLASS_INTELLIGENT 0x0e
+#define PCI_CLASS_INTELLIGENT_I2O 0x0e00
+
+#define PCI_BASE_CLASS_SATELLITE 0x0f
+#define PCI_CLASS_SATELLITE_TV 0x0f00
+#define PCI_CLASS_SATELLITE_AUDIO 0x0f01
+#define PCI_CLASS_SATELLITE_VOICE 0x0f03
+#define PCI_CLASS_SATELLITE_DATA 0x0f04
+
+#define PCI_BASE_CLASS_CRYPT 0x10
+#define PCI_CLASS_CRYPT_NETWORK 0x1000
+#define PCI_CLASS_CRYPT_ENTERTAINMENT 0x1001
+#define PCI_CLASS_CRYPT_OTHER 0x1080
+
+#define PCI_BASE_CLASS_SIGNAL_PROCESSING 0x11
+#define PCI_CLASS_SP_DPIO 0x1100
+#define PCI_CLASS_SP_OTHER 0x1180
+
+#define PCI_CLASS_OTHERS 0xff
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
new file mode 100644
index 0000000..9e11a0d
--- /dev/null
+++ b/include/linux/pci_regs.h
@@ -0,0 +1,118 @@
+/*
+ * pci_regs.h
+ *
+ * PCI standard defines
+ * Copyright 1994, Drew Eckhardt
+ * Copyright 1997--1999 Martin Mares <mj@ucw.cz>
+ *
+ * For more information, please consult the following manuals (look at
+ * http://www.pcisig.com/ for how to get them):
+ *
+ * PCI BIOS Specification
+ * PCI Local Bus Specification
+ * PCI to PCI Bridge Specification
+ * PCI System Design Guide
+ *
+ * For HyperTransport information, please consult the following manuals
+ * from http://www.hypertransport.org
+ *
+ * The HyperTransport I/O Link Specification
+ */
+
+#ifndef LINUX_PCI_REGS_H
+#define LINUX_PCI_REGS_H
+
+/*
+ * Under PCI, each device has 256 bytes of configuration address space,
+ * of which the first 64 bytes are standardized as follows:
+ */
+#define PCI_VENDOR_ID 0x00 /* 16 bits */
+#define PCI_DEVICE_ID 0x02 /* 16 bits */
+#define PCI_COMMAND 0x04 /* 16 bits */
+#define PCI_COMMAND_IO 0x1 /* Enable response in I/O space */
+#define PCI_COMMAND_MEMORY 0x2 /* Enable response in Memory space */
+#define PCI_COMMAND_MASTER 0x4 /* Enable bus mastering */
+#define PCI_COMMAND_SPECIAL 0x8 /* Enable response to special cycles */
+#define PCI_COMMAND_INVALIDATE 0x10 /* Use memory write and invalidate */
+#define PCI_COMMAND_VGA_PALETTE 0x20 /* Enable palette snooping */
+#define PCI_COMMAND_PARITY 0x40 /* Enable parity checking */
+#define PCI_COMMAND_WAIT 0x80 /* Enable address/data stepping */
+#define PCI_COMMAND_SERR 0x100 /* Enable SERR */
+#define PCI_COMMAND_FAST_BACK 0x200 /* Enable back-to-back writes */
+#define PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */
+
+#define PCI_STATUS 0x06 /* 16 bits */
+#define PCI_STATUS_INTERRUPT 0x08 /* Interrupt status */
+#define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */
+#define PCI_STATUS_66MHZ 0x20 /* Support 66 MHz PCI 2.1 bus */
+#define PCI_STATUS_UDF 0x40 /* Support User Definable Features [obsolete] */
+#define PCI_STATUS_FAST_BACK 0x80 /* Accept fast-back to back */
+#define PCI_STATUS_PARITY 0x100 /* Detected parity error */
+#define PCI_STATUS_DEVSEL_MASK 0x600 /* DEVSEL timing */
+#define PCI_STATUS_DEVSEL_FAST 0x000
+#define PCI_STATUS_DEVSEL_MEDIUM 0x200
+#define PCI_STATUS_DEVSEL_SLOW 0x400
+#define PCI_STATUS_SIG_TARGET_ABORT 0x800 /* Set on target abort */
+#define PCI_STATUS_REC_TARGET_ABORT 0x1000 /* Master ack of " */
+#define PCI_STATUS_REC_MASTER_ABORT 0x2000 /* Set on master abort */
+#define PCI_STATUS_SIG_SYSTEM_ERROR 0x4000 /* Set when we drive SERR */
+#define PCI_STATUS_DETECTED_PARITY 0x8000 /* Set on parity error */
+
+#define PCI_CLASS_REVISION 0x08 /* High 24 bits are class, low 8 revision */
+#define PCI_REVISION_ID 0x08 /* Revision ID */
+#define PCI_CLASS_PROG 0x09 /* Reg. Level Programming Interface */
+#define PCI_CLASS_DEVICE 0x0a /* Device class */
+
+#define PCI_CACHE_LINE_SIZE 0x0c /* 8 bits */
+#define PCI_LATENCY_TIMER 0x0d /* 8 bits */
+#define PCI_HEADER_TYPE 0x0e /* 8 bits */
+#define PCI_HEADER_TYPE_NORMAL 0
+#define PCI_HEADER_TYPE_BRIDGE 1
+#define PCI_HEADER_TYPE_CARDBUS 2
+
+#define PCI_BIST 0x0f /* 8 bits */
+#define PCI_BIST_CODE_MASK 0x0f /* Return result */
+#define PCI_BIST_START 0x40 /* 1 to start BIST, 2 secs or less */
+#define PCI_BIST_CAPABLE 0x80 /* 1 if BIST capable */
+
+/*
+ * Base addresses specify locations in memory or I/O space.
+ * Decoded size can be determined by writing a value of
+ * 0xffffffff to the register, and reading it back. Only
+ * 1 bits are decoded.
+ */
+#define PCI_BASE_ADDRESS_0 0x10 /* 32 bits */
+#define PCI_BASE_ADDRESS_1 0x14 /* 32 bits [htype 0,1 only] */
+#define PCI_BASE_ADDRESS_2 0x18 /* 32 bits [htype 0 only] */
+#define PCI_BASE_ADDRESS_3 0x1c /* 32 bits */
+#define PCI_BASE_ADDRESS_4 0x20 /* 32 bits */
+#define PCI_BASE_ADDRESS_5 0x24 /* 32 bits */
+#define PCI_BASE_ADDRESS_SPACE 0x01 /* 0 = memory, 1 = I/O */
+#define PCI_BASE_ADDRESS_SPACE_IO 0x01
+#define PCI_BASE_ADDRESS_SPACE_MEMORY 0x00
+#define PCI_BASE_ADDRESS_MEM_TYPE_MASK 0x06
+#define PCI_BASE_ADDRESS_MEM_TYPE_32 0x00 /* 32 bit address */
+#define PCI_BASE_ADDRESS_MEM_TYPE_1M 0x02 /* Below 1M [obsolete] */
+#define PCI_BASE_ADDRESS_MEM_TYPE_64 0x04 /* 64 bit address */
+#define PCI_BASE_ADDRESS_MEM_PREFETCH 0x08 /* prefetchable? */
+#define PCI_BASE_ADDRESS_MEM_MASK (~0x0fUL)
+#define PCI_BASE_ADDRESS_IO_MASK (~0x03UL)
+/* bit 1 is reserved if address_space = 1 */
+
+/* Header type 0 (normal devices) */
+#define PCI_CARDBUS_CIS 0x28
+#define PCI_SUBSYSTEM_VENDOR_ID 0x2c
+#define PCI_SUBSYSTEM_ID 0x2e
+#define PCI_ROM_ADDRESS 0x30 /* Bits 31..11 are address, 10..1 reserved */
+#define PCI_ROM_ADDRESS_ENABLE 0x01
+#define PCI_ROM_ADDRESS_MASK (~0x7ffUL)
+
+#define PCI_CAPABILITY_LIST 0x34 /* Offset of first capability list entry */
+
+/* 0x35-0x3b are reserved */
+#define PCI_INTERRUPT_LINE 0x3c /* 8 bits */
+#define PCI_INTERRUPT_PIN 0x3d /* 8 bits */
+#define PCI_MIN_GNT 0x3e /* 8 bits */
+#define PCI_MAX_LAT 0x3f /* 8 bits */
+
+#endif /* LINUX_PCI_REGS_H */
--
1.9.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2014-06-25 22:33 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-25 22:32 [RFC v3 0/5] barebox PCI support Antony Pavlov
2014-06-25 22:32 ` Antony Pavlov [this message]
2014-06-30 10:18 ` [RFC v3 1/5] PCI: initial commit Lucas Stach
2014-07-01 7:29 ` Clément Léger
2014-07-01 7:48 ` Antony Pavlov
2014-06-25 22:32 ` [RFC v3 2/5] commands: add 'lspci' command Antony Pavlov
2014-06-30 10:21 ` Lucas Stach
2014-06-30 17:32 ` Antony Pavlov
2014-06-25 22:32 ` [RFC v3 3/5] net: add RealTek RTL-8139 PCI Ethernet driver Antony Pavlov
2014-06-25 22:32 ` [RFC v3 4/5] MIPS: add PCI support for GT64120-based Malta board Antony Pavlov
2014-06-25 22:32 ` [RFC v3 5/5] MIPS: qemu-malta_defconfig: enable PCI & network stuff Antony Pavlov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1403735538-25437-2-git-send-email-antonynpavlov@gmail.com \
--to=antonynpavlov@gmail.com \
--cc=barebox@lists.infradead.org \
--cc=cleger@kalray.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox