From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Subject: [PATCH] usb: chipidea: imx: add vbus regulator support
Date: Mon, 30 Jun 2014 09:52:26 +0200 [thread overview]
Message-ID: <1404114746-7020-1-git-send-email-s.trumtrar@pengutronix.de> (raw)
The chipidea binding describes the optional property of a regulator
for vbus named "vbus-supply".
Add support for this property to the driver so it can be used on boards
with a gpio-controlled regulator.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
drivers/usb/imx/chipidea-imx.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/imx/chipidea-imx.c b/drivers/usb/imx/chipidea-imx.c
index 9b6829b..84522dc 100644
--- a/drivers/usb/imx/chipidea-imx.c
+++ b/drivers/usb/imx/chipidea-imx.c
@@ -18,6 +18,7 @@
#include <of.h>
#include <errno.h>
#include <driver.h>
+#include <regulator.h>
#include <usb/usb.h>
#include <usb/ehci.h>
#include <usb/chipidea-imx.h>
@@ -32,6 +33,7 @@ struct imx_chipidea {
struct ehci_data data;
unsigned long flags;
enum imx_usb_mode mode;
+ struct regulator *reg_vbus;
int portno;
enum usb_phy_interface phymode;
};
@@ -41,6 +43,12 @@ static int imx_chipidea_port_init(void *drvdata)
struct imx_chipidea *ci = drvdata;
int ret;
+ if (ci->reg_vbus) {
+ ret = regulator_enable(ci->reg_vbus);
+ if (ret < 0)
+ return ret;
+ }
+
if ((ci->flags & MXC_EHCI_PORTSC_MASK) == MXC_EHCI_MODE_ULPI) {
dev_dbg(ci->dev, "using ULPI phy\n");
if (IS_ENABLED(CONFIG_USB_ULPI)) {
@@ -54,8 +62,11 @@ static int imx_chipidea_port_init(void *drvdata)
ret = -ENODEV;
}
- if (ret)
+ if (ret) {
+ if (ci->reg_vbus)
+ regulator_disable(ci->reg_vbus);
return ret;
+ }
}
ret = imx_usbmisc_port_init(ci->portno, ci->flags);
@@ -126,6 +137,8 @@ static int imx_chipidea_probe_dt(struct imx_chipidea *ci)
"disable-over-current", NULL))
ci->flags |= MXC_EHCI_DISABLE_OVERCURRENT;
+ ci->reg_vbus = regulator_get(ci->dev, "vbus");
+
return 0;
}
--
2.0.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2014-06-30 7:52 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-30 7:52 Steffen Trumtrar [this message]
2014-06-30 7:57 ` Sebastian Hesselbarth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1404114746-7020-1-git-send-email-s.trumtrar@pengutronix.de \
--to=s.trumtrar@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox