From: Antony Pavlov <antonynpavlov@gmail.com>
To: barebox@lists.infradead.org
Subject: [PATCH v5 6/7] MIPS: add PCI support for GT64120-based Malta board
Date: Fri, 4 Jul 2014 01:27:05 +0400 [thread overview]
Message-ID: <1404422826-6589-7-git-send-email-antonynpavlov@gmail.com> (raw)
In-Reply-To: <1404422826-6589-1-git-send-email-antonynpavlov@gmail.com>
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
arch/mips/Kconfig | 1 +
arch/mips/include/asm/gt64120.h | 53 +++++
arch/mips/mach-malta/Makefile | 1 +
arch/mips/mach-malta/include/mach/mach-gt64120.h | 2 +
arch/mips/mach-malta/pci.c | 236 +++++++++++++++++++++++
5 files changed, 293 insertions(+)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index d4e9e1c..bc68c67 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -45,6 +45,7 @@ config MACH_MIPS_MALTA
select SYS_SUPPORTS_BIG_ENDIAN
select HAS_DEBUG_LL
select GPIOLIB
+ select HW_HAS_PCI
config MACH_MIPS_AR231X
bool "Atheros ar231x-based boards"
diff --git a/arch/mips/include/asm/gt64120.h b/arch/mips/include/asm/gt64120.h
index 6b2ad0f..7e783c8 100644
--- a/arch/mips/include/asm/gt64120.h
+++ b/arch/mips/include/asm/gt64120.h
@@ -18,6 +18,8 @@
#ifndef _ASM_GT64120_H
#define _ASM_GT64120_H
+#define MSK(n) ((1 << (n)) - 1)
+
#define GT_DEF_BASE 0x14000000
/*
@@ -34,4 +36,55 @@
#define GT_PCI0M1LD_OFS 0x080
#define GT_PCI0M1HD_OFS 0x088
+#define GT_PCI0IOREMAP_OFS 0x0f0
+#define GT_PCI0M0REMAP_OFS 0x0f8
+#define GT_PCI0M1REMAP_OFS 0x100
+
+/* Interrupts. */
+#define GT_INTRCAUSE_OFS 0xc18
+
+/* PCI Internal. */
+#define GT_PCI0_CMD_OFS 0xc00
+#define GT_PCI0_CFGADDR_OFS 0xcf8
+#define GT_PCI0_CFGDATA_OFS 0xcfc
+
+#define GT_PCI_DCRM_SHF 21
+#define GT_PCI_LD_SHF 0
+#define GT_PCI_LD_MSK (MSK(15) << GT_PCI_LD_SHF)
+#define GT_PCI_HD_SHF 0
+#define GT_PCI_HD_MSK (MSK(7) << GT_PCI_HD_SHF)
+#define GT_PCI_REMAP_SHF 0
+#define GT_PCI_REMAP_MSK (MSK(11) << GT_PCI_REMAP_SHF)
+
+#define GT_INTRCAUSE_MASABORT0_SHF 18
+#define GT_INTRCAUSE_MASABORT0_MSK (MSK(1) << GT_INTRCAUSE_MASABORT0_SHF)
+#define GT_INTRCAUSE_MASABORT0_BIT GT_INTRCAUSE_MASABORT0_MSK
+
+#define GT_INTRCAUSE_TARABORT0_SHF 19
+#define GT_INTRCAUSE_TARABORT0_MSK (MSK(1) << GT_INTRCAUSE_TARABORT0_SHF)
+#define GT_INTRCAUSE_TARABORT0_BIT GT_INTRCAUSE_TARABORT0_MSK
+
+#define GT_PCI0_CFGADDR_REGNUM_SHF 2
+#define GT_PCI0_CFGADDR_REGNUM_MSK (MSK(6) << GT_PCI0_CFGADDR_REGNUM_SHF)
+#define GT_PCI0_CFGADDR_FUNCTNUM_SHF 8
+#define GT_PCI0_CFGADDR_FUNCTNUM_MSK (MSK(3) << GT_PCI0_CFGADDR_FUNCTNUM_SHF)
+#define GT_PCI0_CFGADDR_DEVNUM_SHF 11
+#define GT_PCI0_CFGADDR_DEVNUM_MSK (MSK(5) << GT_PCI0_CFGADDR_DEVNUM_SHF)
+#define GT_PCI0_CFGADDR_BUSNUM_SHF 16
+#define GT_PCI0_CFGADDR_BUSNUM_MSK (MSK(8) << GT_PCI0_CFGADDR_BUSNUM_SHF)
+#define GT_PCI0_CFGADDR_CONFIGEN_SHF 31
+#define GT_PCI0_CFGADDR_CONFIGEN_MSK (MSK(1) << GT_PCI0_CFGADDR_CONFIGEN_SHF)
+#define GT_PCI0_CFGADDR_CONFIGEN_BIT GT_PCI0_CFGADDR_CONFIGEN_MSK
+
+/*
+ * Because of an error/peculiarity in the Galileo chip, we need to swap the
+ * bytes when running bigendian. We also provide non-swapping versions.
+ */
+#define __GT_READ(ofs) \
+ (*(volatile u32 *)(GT64120_BASE+(ofs)))
+#define __GT_WRITE(ofs, data) \
+ do { *(volatile u32 *)(GT64120_BASE+(ofs)) = (data); } while (0)
+#define GT_READ(ofs) le32_to_cpu(__GT_READ(ofs))
+#define GT_WRITE(ofs, data) __GT_WRITE(ofs, cpu_to_le32(data))
+
#endif /* _ASM_GT64120_H */
diff --git a/arch/mips/mach-malta/Makefile b/arch/mips/mach-malta/Makefile
index f3cc668..0c5a701 100644
--- a/arch/mips/mach-malta/Makefile
+++ b/arch/mips/mach-malta/Makefile
@@ -1 +1,2 @@
obj-y += reset.o
+obj-$(CONFIG_PCI) += pci.o
diff --git a/arch/mips/mach-malta/include/mach/mach-gt64120.h b/arch/mips/mach-malta/include/mach/mach-gt64120.h
index ed1e23e..8f20fcf 100644
--- a/arch/mips/mach-malta/include/mach/mach-gt64120.h
+++ b/arch/mips/mach-malta/include/mach/mach-gt64120.h
@@ -10,4 +10,6 @@
#define MIPS_GT_BASE 0x1be00000
+#define GT64120_BASE 0xbbe00000
+
#endif /* _ASM_MACH_MIPS_MACH_GT64120_DEP_H */
diff --git a/arch/mips/mach-malta/pci.c b/arch/mips/mach-malta/pci.c
new file mode 100644
index 0000000..9035175
--- /dev/null
+++ b/arch/mips/mach-malta/pci.c
@@ -0,0 +1,236 @@
+#include <common.h>
+#include <types.h>
+#include <driver.h>
+#include <init.h>
+#include <mach/hardware.h>
+#include <asm/io.h>
+#include <asm/addrspace.h>
+
+#include <linux/pci.h>
+#include <asm/gt64120.h>
+
+#include <mach/mach-gt64120.h>
+
+#define PCI_ACCESS_READ 0
+#define PCI_ACCESS_WRITE 1
+
+static struct resource gt64120_mem_resource = {
+ .name = "GT-64120 PCI MEM",
+ .flags = IORESOURCE_MEM,
+};
+
+static struct resource gt64120_io_resource = {
+ .name = "GT-64120 PCI I/O",
+ .flags = IORESOURCE_IO,
+};
+
+static int gt64xxx_pci0_pcibios_config_access(unsigned char access_type,
+ struct pci_bus *bus, unsigned int devfn, int where, u32 *data)
+{
+ unsigned char busnum = bus->number;
+ u32 intr;
+
+ if ((busnum == 0) && (devfn >= PCI_DEVFN(31, 0)))
+ return -1; /* Because of a bug in the galileo (for slot 31). */
+
+ /* Clear cause register bits */
+ GT_WRITE(GT_INTRCAUSE_OFS, ~(GT_INTRCAUSE_MASABORT0_BIT |
+ GT_INTRCAUSE_TARABORT0_BIT));
+
+ /* Setup address */
+ GT_WRITE(GT_PCI0_CFGADDR_OFS,
+ (busnum << GT_PCI0_CFGADDR_BUSNUM_SHF) |
+ (devfn << GT_PCI0_CFGADDR_FUNCTNUM_SHF) |
+ ((where / 4) << GT_PCI0_CFGADDR_REGNUM_SHF) |
+ GT_PCI0_CFGADDR_CONFIGEN_BIT);
+
+ if (access_type == PCI_ACCESS_WRITE) {
+ if (busnum == 0 && PCI_SLOT(devfn) == 0) {
+ /*
+ * The Galileo system controller is acting
+ * differently than other devices.
+ */
+ GT_WRITE(GT_PCI0_CFGDATA_OFS, *data);
+ } else
+ __GT_WRITE(GT_PCI0_CFGDATA_OFS, *data);
+ } else {
+ if (busnum == 0 && PCI_SLOT(devfn) == 0) {
+ /*
+ * The Galileo system controller is acting
+ * differently than other devices.
+ */
+ *data = GT_READ(GT_PCI0_CFGDATA_OFS);
+ } else
+ *data = __GT_READ(GT_PCI0_CFGDATA_OFS);
+ }
+
+ /* Check for master or target abort */
+ intr = GT_READ(GT_INTRCAUSE_OFS);
+
+ if (intr & (GT_INTRCAUSE_MASABORT0_BIT | GT_INTRCAUSE_TARABORT0_BIT)) {
+ /* Error occurred */
+
+ /* Clear bits */
+ GT_WRITE(GT_INTRCAUSE_OFS, ~(GT_INTRCAUSE_MASABORT0_BIT |
+ GT_INTRCAUSE_TARABORT0_BIT));
+
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * We can't address 8 and 16 bit words directly. Instead we have to
+ * read/write a 32bit word and mask/modify the data we actually want.
+ */
+static int gt64xxx_pci0_pcibios_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ u32 data = 0;
+
+ if (gt64xxx_pci0_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
+ where, &data))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (size == 1)
+ *val = (data >> ((where & 3) << 3)) & 0xff;
+ else if (size == 2)
+ *val = (data >> ((where & 3) << 3)) & 0xffff;
+ else
+ *val = data;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int gt64xxx_pci0_pcibios_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ u32 data = 0;
+
+ if (size == 4)
+ data = val;
+ else {
+ if (gt64xxx_pci0_pcibios_config_access(PCI_ACCESS_READ, bus,
+ devfn, where, &data))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (size == 1)
+ data = (data & ~(0xff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ else if (size == 2)
+ data = (data & ~(0xffff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ }
+
+ if (gt64xxx_pci0_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn,
+ where, &data))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+/* function returns memory address for begin of pci resource */
+static int gt64xxx_res_start(struct pci_bus *bus, resource_size_t res_addr)
+{
+ return KSEG0ADDR(res_addr);
+}
+
+struct pci_ops gt64xxx_pci0_ops = {
+ .read = gt64xxx_pci0_pcibios_read,
+ .write = gt64xxx_pci0_pcibios_write,
+
+ .res_start = gt64xxx_res_start,
+};
+
+static struct pci_controller gt64120_controller = {
+ .pci_ops = >64xxx_pci0_ops,
+ .io_resource = >64120_io_resource,
+ .mem_resource = >64120_mem_resource,
+};
+
+static int pcibios_init(void)
+{
+ resource_size_t start, end, map, start1, end1, map1, mask, res_end;
+
+ /*
+ * Due to a bug in the Galileo system controller, we need
+ * to setup the PCI BAR for the Galileo internal registers.
+ * This should be done in the bios/bootprom and will be
+ * fixed in a later revision of YAMON (the MIPS boards
+ * boot prom).
+ */
+ GT_WRITE(GT_PCI0_CFGADDR_OFS,
+ (0 << GT_PCI0_CFGADDR_BUSNUM_SHF) | /* Local bus */
+ (0 << GT_PCI0_CFGADDR_DEVNUM_SHF) | /* GT64120 dev */
+ (0 << GT_PCI0_CFGADDR_FUNCTNUM_SHF) | /* Function 0*/
+ ((0x20/4) << GT_PCI0_CFGADDR_REGNUM_SHF) | /* BAR 4*/
+ GT_PCI0_CFGADDR_CONFIGEN_BIT);
+
+ /* Perform the write */
+ GT_WRITE(GT_PCI0_CFGDATA_OFS, CPHYSADDR(MIPS_GT_BASE));
+
+ /* Here is linux code. It assumes, that firmware
+ (pbl in case of barebox) made the work... */
+
+ /* Set up resource ranges from the controller's registers. */
+ start = GT_READ(GT_PCI0M0LD_OFS);
+ end = GT_READ(GT_PCI0M0HD_OFS);
+ map = GT_READ(GT_PCI0M0REMAP_OFS);
+ end = (end & GT_PCI_HD_MSK) | (start & ~GT_PCI_HD_MSK);
+ start1 = GT_READ(GT_PCI0M1LD_OFS);
+ end1 = GT_READ(GT_PCI0M1HD_OFS);
+ map1 = GT_READ(GT_PCI0M1REMAP_OFS);
+ end1 = (end1 & GT_PCI_HD_MSK) | (start1 & ~GT_PCI_HD_MSK);
+
+ mask = ~(start ^ end);
+
+ /* We don't support remapping with a discontiguous mask. */
+ BUG_ON((start & GT_PCI_HD_MSK) != (map & GT_PCI_HD_MSK) &&
+ mask != ~((mask & -mask) - 1));
+ gt64120_mem_resource.start = start;
+ gt64120_mem_resource.end = end;
+ gt64120_controller.mem_offset = (start & mask) - (map & mask);
+ /* Addresses are 36-bit, so do shifts in the destinations. */
+ gt64120_mem_resource.start <<= GT_PCI_DCRM_SHF;
+ gt64120_mem_resource.end <<= GT_PCI_DCRM_SHF;
+ gt64120_mem_resource.end |= (1 << GT_PCI_DCRM_SHF) - 1;
+ gt64120_controller.mem_offset <<= GT_PCI_DCRM_SHF;
+
+ start = GT_READ(GT_PCI0IOLD_OFS);
+ end = GT_READ(GT_PCI0IOHD_OFS);
+ map = GT_READ(GT_PCI0IOREMAP_OFS);
+ end = (end & GT_PCI_HD_MSK) | (start & ~GT_PCI_HD_MSK);
+ mask = ~(start ^ end);
+
+ /* We don't support remapping with a discontiguous mask. */
+ BUG_ON((start & GT_PCI_HD_MSK) != (map & GT_PCI_HD_MSK) &&
+ mask != ~((mask & -mask) - 1));
+ gt64120_io_resource.start = map & mask;
+ res_end = (map & mask) | ~mask;
+ gt64120_controller.io_offset = 0;
+ /* Addresses are 36-bit, so do shifts in the destinations. */
+ gt64120_io_resource.start <<= GT_PCI_DCRM_SHF;
+ gt64120_io_resource.end <<= GT_PCI_DCRM_SHF;
+ gt64120_io_resource.end |= (1 << GT_PCI_DCRM_SHF) - 1;
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+ GT_WRITE(GT_PCI0_CMD_OFS, GT_PCI0_CMD_MBYTESWAP_BIT |
+ GT_PCI0_CMD_SBYTESWAP_BIT);
+#else
+ GT_WRITE(GT_PCI0_CMD_OFS, 0);
+#endif
+
+ /* Fix up PCI I/O mapping if necessary (for Atlas). */
+ start = GT_READ(GT_PCI0IOLD_OFS);
+ map = GT_READ(GT_PCI0IOREMAP_OFS);
+ if ((start & map) != 0) {
+ map &= ~start;
+ GT_WRITE(GT_PCI0IOREMAP_OFS, map);
+ }
+
+ register_pci_controller(>64120_controller);
+
+ return 0;
+}
+postcore_initcall(pcibios_init);
--
2.0.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2014-07-03 21:27 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-03 21:26 [PATCH v5 0/7] barebox PCI support Antony Pavlov
2014-07-03 21:27 ` [PATCH v5 1/7] linux/ioport.h: include missed <linux/list.h> Antony Pavlov
2014-07-03 21:27 ` [PATCH v5 2/7] MIPS: add dma_alloc_coherent() Antony Pavlov
2014-07-03 21:27 ` [PATCH v5 3/7] PCI: initial commit Antony Pavlov
2014-07-07 18:22 ` Jean-Christophe PLAGNIOL-VILLARD
2014-07-07 21:23 ` Antony Pavlov
2014-07-08 6:29 ` Sascha Hauer
2014-07-08 9:48 ` Antony Pavlov
2014-07-08 9:51 ` Sascha Hauer
2014-07-08 9:50 ` Antony Pavlov
2014-07-08 9:53 ` Jean-Christophe PLAGNIOL-VILLARD
2014-07-03 21:27 ` [PATCH v5 4/7] commands: add 'lspci' command Antony Pavlov
2014-07-03 21:27 ` [PATCH v5 5/7] net: add RealTek RTL-8139 PCI Ethernet driver Antony Pavlov
2014-07-03 21:27 ` Antony Pavlov [this message]
2014-07-03 21:27 ` [PATCH v5 7/7] MIPS: qemu-malta_defconfig: enable PCI & network stuff Antony Pavlov
2014-07-04 5:38 ` [PATCH v5 0/7] barebox PCI support Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1404422826-6589-7-git-send-email-antonynpavlov@gmail.com \
--to=antonynpavlov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox