From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1X4OzF-0000vV-93 for barebox@lists.infradead.org; Tue, 08 Jul 2014 06:34:46 +0000 From: Sascha Hauer Date: Tue, 8 Jul 2014 08:34:21 +0200 Message-Id: <1404801262-27616-1-git-send-email-s.hauer@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 1/2] dlmalloc: remove unused functions To: barebox@lists.infradead.org remove unused function declarations and definitions: - vallocc is #if 0 in source code - pvalloc is defined but not used - cfree is defined but not used - malloc_usable_size is unused - mallopt is not defined - mallinfo is not defined Signed-off-by: Sascha Hauer --- common/dlmalloc.c | 169 ------------------------------------------------------ include/malloc.h | 7 --- 2 files changed, 176 deletions(-) diff --git a/common/dlmalloc.c b/common/dlmalloc.c index d831e90..499ec93 100644 --- a/common/dlmalloc.c +++ b/common/dlmalloc.c @@ -1712,29 +1712,6 @@ void *memalign(size_t alignment, size_t bytes) return chunk2mem(p); } -#if 0 -/* - * valloc just invokes memalign with alignment argument equal - * to the page size of the system (or as near to this as can - * be figured out from all the includes/defines above.) - */ -void *valloc(size_t bytes) -{ - return memalign(malloc_getpagesize, bytes); -} -#endif - -/* - * pvalloc just invokes valloc for the nearest pagesize - * that will accommodate request - */ -void *pvalloc (size_t bytes) -{ - size_t pagesize = malloc_getpagesize; - - return memalign(pagesize, (bytes + pagesize - 1) & ~(pagesize - 1)); -} - /* * * calloc calls malloc, then zeroes out the allocated chunk. @@ -1774,115 +1751,6 @@ void *calloc(size_t n, size_t elem_size) } } -/* - * - * cfree just calls free. It is needed/defined on some systems - * that pair it with calloc, presumably for odd historical reasons. - */ -#if !defined(INTERNAL_LINUX_C_LIB) || !defined(__ELF__) -void cfree(void *mem) -{ - free(mem); -} -#endif - -/* - Malloc_trim gives memory back to the system (via negative - arguments to sbrk) if there is unused memory at the `high' end of - the malloc pool. You can call this after freeing large blocks of - memory to potentially reduce the system-level memory requirements - of a program. However, it cannot guarantee to reduce memory. Under - some allocation patterns, some large free blocks of memory will be - locked between two used chunks, so they cannot be given back to - the system. - - The `pad' argument to malloc_trim represents the amount of free - trailing space to leave untrimmed. If this argument is zero, - only the minimum amount of memory to maintain internal data - structures will be left (one page or less). Non-zero arguments - can be supplied to maintain enough trailing space to service - future expected allocations without having to re-obtain memory - from the system. - - Malloc_trim returns 1 if it actually released any memory, else 0. -*/ -#ifdef USE_MALLOC_TRIM -int malloc_trim(size_t pad) -{ - long top_size; /* Amount of top-most memory */ - long extra; /* Amount to release */ - char *current_brk; /* address returned by pre-check sbrk call */ - char *new_brk; /* address returned by negative sbrk call */ - - unsigned long pagesz = malloc_getpagesize; - - top_size = chunksize(top); - extra = ((top_size - pad - MINSIZE + (pagesz - 1)) / pagesz - - 1) * pagesz; - - if (extra < (long)pagesz) /* Not enough memory to release */ - return 0; - - else { - /* Test to make sure no one else called sbrk */ - current_brk = (char*)(sbrk(0)); - if (current_brk != (char*)(top) + top_size) - return 0; /* Apparently we don't own memory; must fail */ - - else { - new_brk = (char *) (sbrk(-extra)); - - if (new_brk == (char*)(NULL)) { /* sbrk failed? */ - /* Try to figure out what we have */ - current_brk = (char*)(sbrk (0)); - top_size = current_brk - (char*) top; - if (top_size >= (long)MINSIZE) { /* if not, we are very very dead! */ - sbrked_mem = current_brk - sbrk_base; - set_head(top, top_size | PREV_INUSE); - } - return 0; - } - - else { - /* Success. Adjust top accordingly. */ - set_head(top, (top_size - extra) | PREV_INUSE); - sbrked_mem -= extra; - return 1; - } - } - } -} -#endif - -/* - * malloc_usable_size: - * - * This routine tells you how many bytes you can actually use in an - * allocated chunk, which may be more than you requested (although - * often not). You can use this many bytes without worrying about - * overwriting other allocated objects. Not a particularly great - * programming practice, but still sometimes useful. - */ -size_t malloc_usable_size(void *mem) -{ - mchunkptr p; - - if (!mem) - return 0; - else { - p = mem2chunk(mem); - if (!chunk_is_mmapped(p)) { - if (!inuse(p)) - return 0; - return chunksize(p) - SIZE_SZ; - } - return chunksize(p) - 2 * SIZE_SZ; - } -} - - - - /* Utility to update current_mallinfo for malloc_stats and mallinfo() */ #ifdef CONFIG_CMD_MEMINFO @@ -1956,43 +1824,6 @@ void malloc_stats(void) #endif /* CONFIG_CMD_MEMINFO */ /* - mallopt: - - mallopt is the general SVID/XPG interface to tunable parameters. - The format is to provide a (parameter-number, parameter-value) pair. - mallopt then sets the corresponding parameter to the argument - value if it can (i.e., so long as the value is meaningful), - and returns 1 if successful else 0. - - See descriptions of tunable parameters above. -*/ -#ifndef __BAREBOX__ -int mallopt(int param_number, int value) -{ - switch (param_number) { - case M_TRIM_THRESHOLD: - trim_threshold = value; - return 1; - case M_TOP_PAD: - top_pad = value; - return 1; - case M_MMAP_THRESHOLD: - mmap_threshold = value; - return 1; - case M_MMAP_MAX: - if (value != 0) - return 0; - else - n_mmaps_max = value; - return 1; - - default: - return 0; - } -} -#endif - -/* History: diff --git a/include/malloc.h b/include/malloc.h index 7b9b062..46147bc 100644 --- a/include/malloc.h +++ b/include/malloc.h @@ -9,15 +9,8 @@ void* malloc(size_t); void free(void*); void* realloc(void*, size_t); void* memalign(size_t, size_t); -void* vallocc(size_t); -void* pvalloc(size_t); void* calloc(size_t, size_t); -void cfree(void*); -int malloc_trim(size_t); -size_t malloc_usable_size(void*); void malloc_stats(void); -int mallopt(int, int); -struct mallinfo mallinfo(void); void *sbrk(ptrdiff_t increment); #endif -- 2.0.0 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox