From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 4/7] serial: Add EFI stdio driver
Date: Fri, 11 Jul 2014 09:36:27 +0200 [thread overview]
Message-ID: <1405064190-1977-5-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1405064190-1977-1-git-send-email-s.hauer@pengutronix.de>
This adds a driver which uses the EFI stdin/stdout interfaces to
implement a barebox console. Keyboard input should be fairly complete,
but not all vt100 needed by barebox work properly. The clear-to-eol
escape is missing causing garbled output in the editor.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
commands/edit.c | 11 +-
drivers/serial/Kconfig | 4 +
drivers/serial/Makefile | 1 +
drivers/serial/efi-stdio.c | 367 +++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 382 insertions(+), 1 deletion(-)
create mode 100644 drivers/serial/efi-stdio.c
diff --git a/commands/edit.c b/commands/edit.c
index 5a2da7d..98af583 100644
--- a/commands/edit.c
+++ b/commands/edit.c
@@ -379,7 +379,16 @@ static int do_edit(int argc, char *argv[])
return COMMAND_ERROR_USAGE;
screenwidth = 80;
- screenheight = 25;
+
+ /*
+ * The EFI simple text output protocol wraps to the next line and scrolls
+ * down when we write to the right bottom screen position. Reduce the number
+ * of rows by one to work around this.
+ */
+ if (IS_ENABLED(CONFIG_ARCH_EFI))
+ screenheight = 24;
+ else
+ screenheight = 25;
/* check if we are called as "sedit" instead of "edit" */
if (*argv[0] == 's') {
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index f51c6e6..5698c2f 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -45,6 +45,10 @@ config DRIVER_SERIAL_LINUX_CONSOLE
default y
bool "linux console driver"
+config DRIVER_SERIAL_EFI_STDIO
+ depends on ARCH_EFI
+ bool "EFI stdio driver"
+
config DRIVER_SERIAL_MPC5XXX
depends on MPC5200
default y
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index e1865f7..2c0176d 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -18,3 +18,4 @@ obj-$(CONFIG_DRIVER_SERIAL_PXA) += serial_pxa.o
obj-$(CONFIG_DRIVER_SERIAL_OMAP4_USBBOOT) += serial_omap4_usbboot.o
obj-$(CONFIG_DRIVER_SERIAL_AUART) += serial_auart.o
obj-$(CONFIG_DRIVER_SERIAL_CADENCE) += serial_cadence.o
+obj-$(CONFIG_DRIVER_SERIAL_EFI_STDIO) += efi-stdio.o
diff --git a/drivers/serial/efi-stdio.c b/drivers/serial/efi-stdio.c
new file mode 100644
index 0000000..bf14c5e
--- /dev/null
+++ b/drivers/serial/efi-stdio.c
@@ -0,0 +1,367 @@
+/*
+ * efi_console.c - EFI console support
+ *
+ * Copyright (c) 2014 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <common.h>
+#include <driver.h>
+#include <init.h>
+#include <malloc.h>
+#include <console.h>
+#include <xfuncs.h>
+#include <efi.h>
+#include <readkey.h>
+#include <linux/ctype.h>
+#include <mach/efi.h>
+
+#define EFI_SHIFT_STATE_VALID 0x80000000
+#define EFI_RIGHT_CONTROL_PRESSED 0x00000004
+#define EFI_LEFT_CONTROL_PRESSED 0x00000008
+#define EFI_RIGHT_ALT_PRESSED 0x00000010
+#define EFI_LEFT_ALT_PRESSED 0x00000020
+
+#define EFI_CONTROL_PRESSED (EFI_RIGHT_CONTROL_PRESSED | EFI_LEFT_CONTROL_PRESSED)
+#define EFI_ALT_PRESSED (EFI_RIGHT_ALT_PRESSED | EFI_LEFT_ALT_PRESSED)
+#define KEYPRESS(keys, scan, uni) ((((uint64_t)keys) << 32) | ((scan) << 16) | (uni))
+#define KEYCHAR(k) ((k) & 0xffff)
+#define CHAR_CTRL(c) ((c) - 'a' + 1)
+
+#define EFI_BLACK 0x00
+#define EFI_BLUE 0x01
+#define EFI_GREEN 0x02
+#define EFI_CYAN (EFI_BLUE | EFI_GREEN)
+#define EFI_RED 0x04
+#define EFI_MAGENTA (EFI_BLUE | EFI_RED)
+#define EFI_BROWN (EFI_GREEN | EFI_RED)
+#define EFI_LIGHTGRAY (EFI_BLUE | EFI_GREEN | EFI_RED)
+#define EFI_BRIGHT 0x08
+#define EFI_DARKGRAY (EFI_BRIGHT)
+#define EFI_LIGHTBLUE (EFI_BLUE | EFI_BRIGHT)
+#define EFI_LIGHTGREEN (EFI_GREEN | EFI_BRIGHT)
+#define EFI_LIGHTCYAN (EFI_CYAN | EFI_BRIGHT)
+#define EFI_LIGHTRED (EFI_RED | EFI_BRIGHT)
+#define EFI_LIGHTMAGENTA (EFI_MAGENTA | EFI_BRIGHT)
+#define EFI_YELLOW (EFI_BROWN | EFI_BRIGHT)
+#define EFI_WHITE (EFI_BLUE | EFI_GREEN | EFI_RED | EFI_BRIGHT)
+
+#define EFI_TEXT_ATTR(f,b) ((f) | ((b) << 4))
+
+#define EFI_BACKGROUND_BLACK 0x00
+#define EFI_BACKGROUND_BLUE 0x10
+#define EFI_BACKGROUND_GREEN 0x20
+#define EFI_BACKGROUND_CYAN (EFI_BACKGROUND_BLUE | EFI_BACKGROUND_GREEN)
+#define EFI_BACKGROUND_RED 0x40
+#define EFI_BACKGROUND_MAGENTA (EFI_BACKGROUND_BLUE | EFI_BACKGROUND_RED)
+#define EFI_BACKGROUND_BROWN (EFI_BACKGROUND_GREEN | EFI_BACKGROUND_RED)
+#define EFI_BACKGROUND_LIGHTGRAY (EFI_BACKGROUND_BLUE | EFI_BACKGROUND_GREEN | EFI_BACKGROUND_RED)
+
+struct efi_console_priv {
+ struct efi_simple_text_output_protocol *out;
+ struct efi_simple_input_interface *in;
+ struct console_device cdev;
+ int lastkey;
+ u16 efi_console_buffer[CONFIG_CBSIZE];
+
+ unsigned long columns, rows;
+
+ int current_color;
+ s16 *blank_line;
+};
+
+static inline struct efi_console_priv *to_efi(struct console_device *cdev)
+{
+ return container_of(cdev, struct efi_console_priv, cdev);
+}
+
+struct efi_ctrlkey {
+ u8 scan_code;
+ u8 bb_key;
+};
+
+static struct efi_ctrlkey ctrlkeys[] = {
+ { 0x01, BB_KEY_UP },
+ { 0x02, BB_KEY_DOWN },
+ { 0x03, BB_KEY_RIGHT },
+ { 0x04, BB_KEY_LEFT },
+ { 0x05, BB_KEY_HOME },
+ { 0x06, BB_KEY_END },
+ { 0x07, BB_KEY_INSERT },
+ { 0x08, BB_KEY_DEL },
+ { 0x09, BB_KEY_PAGEUP },
+ { 0x0a, BB_KEY_PAGEDOWN },
+};
+
+static int efi_read_key(struct efi_console_priv *priv, bool wait)
+{
+ unsigned long index;
+ efi_status_t efiret;
+ struct efi_input_key k;
+ int i;
+
+ /* wait until key is pressed */
+ if (wait)
+ BS->wait_for_event(1, priv->in->wait_for_key, &index);
+
+ efiret = priv->in->read_key_stroke(efi_sys_table->con_in, &k);
+ if (EFI_ERROR(efiret))
+ return -efi_errno(efiret);
+
+ /* 32 bit modifier keys + 16 bit scan code + 16 bit unicode */
+ for (i = 0; i < ARRAY_SIZE(ctrlkeys); i++) {
+ if (ctrlkeys[i].scan_code == k.scan_code)
+ return ctrlkeys[i].bb_key;
+
+ }
+
+ return k.unicode_char & 0xff;
+}
+
+static void efi_console_putc(struct console_device *cdev, char c)
+{
+ uint16_t str[2] = {};
+ struct efi_simple_text_output_protocol *con_out = efi_sys_table->con_out;
+
+ str[0] = c;
+
+ con_out->output_string(con_out, str);
+}
+
+static void clear_to_eol(struct efi_console_priv *priv)
+{
+ int pos = priv->out->mode->cursor_column;
+
+ priv->out->output_string(priv->out, priv->blank_line + pos);
+}
+
+static int efi_process_square_bracket(struct efi_console_priv *priv, const char *inp)
+{
+ int x, y;
+ char *endp;
+
+ inp++;
+
+ switch (*inp) {
+ case 'A':
+ /* Cursor up */
+ case 'B':
+ /* Cursor down */
+ case 'C':
+ /* Cursor right */
+ case 'D':
+ /* Cursor left */
+ case 'H':
+ /* home */
+ case 'F':
+ /* end */
+ return 3;
+ case 'K':
+ clear_to_eol(priv);
+ return 3;
+ }
+
+ if (*inp == '2' && *(inp + 1) == 'J') {
+ priv->out->clear_screen(priv->out);
+ return 4;
+ }
+
+ if (*inp == '0' && *(inp + 1) == 'm') {
+ priv->out->set_attribute(priv->out,
+ EFI_TEXT_ATTR(EFI_WHITE, EFI_BLACK));
+ return 4;
+ }
+
+ if (*inp == '7' && *(inp + 1) == 'm') {
+ priv->out->set_attribute(priv->out,
+ EFI_TEXT_ATTR(EFI_BLACK, priv->current_color));
+ return 4;
+ }
+
+ if (*inp == '1' &&
+ *(inp + 1) == ';' &&
+ *(inp + 2) == '3' &&
+ *(inp + 3) &&
+ *(inp + 4) == 'm') {
+ int color;
+ switch (*(inp + 3)) {
+ case '1': color = EFI_RED; break;
+ case '4': color = EFI_BLUE; break;
+ case '2': color = EFI_GREEN; break;
+ case '6': color = EFI_CYAN; break;
+ case '3': color = EFI_YELLOW; break;
+ case '5': color = EFI_MAGENTA; break;
+ case '7': color = EFI_WHITE; break;
+ default: color = EFI_WHITE; break;
+ }
+
+ priv->current_color = color;
+
+ priv->out->set_attribute(priv->out,
+ EFI_TEXT_ATTR(color, EFI_BLACK));
+ return 7;
+ }
+
+ y = simple_strtoul(inp, &endp, 10);
+ if (*endp == ';') {
+ x = simple_strtoul(endp + 1, &endp, 10);
+ if (*endp == 'H') {
+ priv->out->set_cursor_position(priv->out, x - 1, y - 1);
+ return endp - inp + 3;
+ }
+ }
+
+ return 8;
+}
+
+static int efi_process_key(struct efi_console_priv *priv, const char *inp)
+{
+ char c;
+
+ c = *inp;
+
+ if (c != 27)
+ return 0;
+
+ inp++;
+
+ if (*inp == '[')
+ return efi_process_square_bracket(priv, inp);
+
+ return 1;
+}
+
+static int efi_console_puts(struct console_device *cdev, const char *s)
+{
+ struct efi_console_priv *priv = to_efi(cdev);
+ int n = 0;
+
+ while (*s) {
+ if (*s == 27) {
+ priv->efi_console_buffer[n] = 0;
+ priv->out->output_string(priv->out,
+ priv->efi_console_buffer);
+ n = 0;
+ s += efi_process_key(priv, s);
+ continue;
+ }
+
+ if (*s == '\n')
+ priv->efi_console_buffer[n++] = '\r';
+ priv->efi_console_buffer[n] = *s;
+ s++;
+ n++;
+ }
+
+ priv->efi_console_buffer[n] = 0;
+
+ priv->out->output_string(priv->out, priv->efi_console_buffer);
+
+ return n;
+}
+
+static int efi_console_tstc(struct console_device *cdev)
+{
+ struct efi_console_priv *priv = to_efi(cdev);
+ int key;
+
+ if (priv->lastkey > 0)
+ return 1;
+
+ key = efi_read_key(priv, 0);
+ if (key < 0)
+ return 0;
+
+ priv->lastkey = key;
+
+ return 1;
+}
+
+static int efi_console_getc(struct console_device *cdev)
+{
+ struct efi_console_priv *priv = to_efi(cdev);
+ int key;
+
+ if (priv->lastkey > 0) {
+ key = priv->lastkey;
+ priv->lastkey = -1;
+ return key;
+ }
+
+ return efi_read_key(priv, 1);
+}
+
+static void efi_set_mode(struct efi_console_priv *priv)
+{
+#if 0
+ int i;
+ unsigned long rows, columns, best = 0, mode = 0;
+ efi_status_t efiret;
+
+ for (i = 0; i < priv->out->mode->max_mode; i++) {
+ priv->out->query_mode(priv->out, i, &columns, &rows);
+ printf("%d: %ld %ld\n", i, columns, rows);
+ if (rows * columns > best) {
+ best = rows * columns;
+ mode = i;
+ }
+ }
+
+ /*
+ * Setting the mode doesn't work as expected. set_mode succeeds, but
+ * the graphics resolution is not changed.
+ */
+ priv->out->set_mode(priv->out, mode);
+#endif
+ priv->out->query_mode(priv->out, priv->out->mode->mode, &priv->columns, &priv->rows);
+}
+
+static int efi_console_probe(struct device_d *dev)
+{
+ struct console_device *cdev;
+ struct efi_console_priv *priv;
+ int i;
+
+ priv = xzalloc(sizeof(*priv));
+
+ priv->out = efi_sys_table->con_out;
+ priv->in = efi_sys_table->con_in;
+
+ priv->current_color = EFI_WHITE;
+
+ efi_set_mode(priv);
+
+ priv->out->enable_cursor(priv->out, 1);
+
+ priv->blank_line = xzalloc((priv->columns + 1) * sizeof(s16));
+ for (i = 0; i < priv->columns; i++)
+ priv->blank_line[i] = ' ';
+
+ cdev = &priv->cdev;
+ cdev->dev = dev;
+ cdev->tstc = efi_console_tstc;
+ cdev->getc = efi_console_getc;
+ cdev->putc = efi_console_putc;
+ cdev->puts = efi_console_puts;
+
+ priv->lastkey = -1;
+
+ return console_register(cdev);
+}
+
+static struct driver_d efi_console_driver = {
+ .name = "efi-stdio",
+ .probe = efi_console_probe,
+};
+console_platform_driver(efi_console_driver);
--
2.0.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2014-07-11 7:38 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-11 7:36 [PATCH v2] Initial EFI support Sascha Hauer
2014-07-11 7:36 ` [PATCH 1/7] Documentation: Add EFI documentation Sascha Hauer
2014-07-11 7:36 ` [PATCH 3/7] net: Add EFI Simple Network Protocol Driver Sascha Hauer
2014-07-11 7:36 ` Sascha Hauer [this message]
2014-07-11 7:36 ` [PATCH 5/7] fs: implement EFI filesystem driver Sascha Hauer
2014-07-11 7:36 ` [PATCH 6/7] fs: implement EFI variable " Sascha Hauer
2014-07-11 7:36 ` [PATCH 7/7] EFI: introduce efi_strguid to convert GUID to human readable names Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1405064190-1977-5-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox