From: Antony Pavlov <antonynpavlov@gmail.com>
To: barebox@lists.infradead.org
Subject: [PATCH v2 05/11] gpio: add driver for Canon DIGIC
Date: Tue, 29 Jul 2014 01:15:24 +0400 [thread overview]
Message-ID: <1406582130-10116-6-git-send-email-antonynpavlov@gmail.com> (raw)
In-Reply-To: <1406582130-10116-1-git-send-email-antonynpavlov@gmail.com>
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
drivers/gpio/Kconfig | 4 ++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-digic.c | 180 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 185 insertions(+)
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 6928fcb..0ca7df4 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -9,6 +9,10 @@ menu "GPIO"
config GPIO_GENERIC
bool
+config GPIO_DIGIC
+ bool "GPIO support for Canon DIGIC"
+ depends on ARCH_DIGIC
+
config GPIO_BCM2835
bool "GPIO support for BCM2835"
depends on ARCH_BCM2835
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index ece5efd..510d146 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_GPIOLIB) += gpiolib.o
obj-$(CONFIG_GPIO_BCM2835) += gpio-bcm2835.o
obj-$(CONFIG_GPIO_DAVINCI) += gpio-davinci.o
obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o
+obj-$(CONFIG_GPIO_DIGIC) += gpio-digic.o
obj-$(CONFIG_GPIO_GENERIC) += gpio-generic.o
obj-$(CONFIG_GPIO_IMX) += gpio-imx.o
obj-$(CONFIG_GPIO_JZ4740) += gpio-jz4740.o
diff --git a/drivers/gpio/gpio-digic.c b/drivers/gpio/gpio-digic.c
new file mode 100644
index 0000000..468aaa7
--- /dev/null
+++ b/drivers/gpio/gpio-digic.c
@@ -0,0 +1,180 @@
+/*
+ * Copyright (C) 2013 Antony Pavlov <antonynpavlov@gmail.com>
+ *
+ * This file is part of barebox.
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <errno.h>
+#include <io.h>
+#include <gpio.h>
+#include <init.h>
+
+/*
+ * See http://magiclantern.wikia.com/wiki/Register_Map#GPIO_Ports
+ */
+
+#define DIGIC_GPIO_IN_LVL 1
+#define DIGIC_GPIO_OUT_LVL 2
+#define DIGIC_GPIO_DIR 4
+#define DIGIC_GPIO_TRISTATE 8
+
+struct digic_gpio_chip {
+ void __iomem *base;
+ struct gpio_chip gc;
+};
+
+#define to_digic_gpio_chip(c) container_of(c, struct digic_gpio_chip, gc)
+
+static inline uint32_t digic_gpio_readl(struct digic_gpio_chip *chip,
+ uint32_t offset)
+{
+ return readl(chip->base + 4 * offset);
+}
+
+static inline void digic_gpio_writel(struct digic_gpio_chip *chip,
+ uint32_t value, uint32_t offset)
+{
+ writel(value, chip->base + 4 * offset);
+}
+
+static int digic_gpio_get_value(struct gpio_chip *gc, unsigned offset)
+{
+ struct digic_gpio_chip *chip = to_digic_gpio_chip(gc);
+
+ if (offset >= gc->ngpio)
+ return -EINVAL;
+
+ return digic_gpio_readl(chip, offset) & DIGIC_GPIO_IN_LVL;
+}
+
+static void digic_gpio_set_value(struct gpio_chip *gc, unsigned offset,
+ int value)
+{
+ struct digic_gpio_chip *chip = to_digic_gpio_chip(gc);
+ uint32_t t;
+
+ if (offset >= gc->ngpio)
+ return;
+
+ t = digic_gpio_readl(chip, offset);
+ /* Port direction (1 = OUT, 0 = IN) */
+ if (value)
+ t |= DIGIC_GPIO_OUT_LVL;
+ else
+ t &= ~(DIGIC_GPIO_OUT_LVL);
+ digic_gpio_writel(chip, t, offset);
+}
+
+static int digic_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+ struct digic_gpio_chip *chip = to_digic_gpio_chip(gc);
+ uint32_t t;
+
+ if (offset >= gc->ngpio)
+ return -EINVAL;
+
+ t = digic_gpio_readl(chip, offset);
+ /* Port direction (1 = OUT, 0 = IN) */
+ t &= ~(DIGIC_GPIO_DIR);
+ digic_gpio_writel(chip, t, offset);
+
+ return 0;
+}
+
+static int digic_gpio_direction_output(struct gpio_chip *gc, unsigned offset,
+ int value)
+{
+ struct digic_gpio_chip *chip = to_digic_gpio_chip(gc);
+ uint32_t t;
+
+ if (offset >= gc->ngpio)
+ return -EINVAL;
+
+ t = digic_gpio_readl(chip, offset);
+ /* Port direction (1 = OUT, 0 = IN) */
+ t |= DIGIC_GPIO_DIR;
+ digic_gpio_writel(chip, t, offset);
+
+ digic_gpio_set_value(gc, offset, value);
+
+ return 0;
+}
+
+static struct gpio_ops digic_gpio_ops = {
+ .direction_input = digic_gpio_direction_input,
+ .direction_output = digic_gpio_direction_output,
+ .get = digic_gpio_get_value,
+ .set = digic_gpio_set_value,
+};
+
+static int digic_gpio_probe(struct device_d *dev)
+{
+ struct digic_gpio_chip *chip;
+ struct resource *res;
+ resource_size_t rsize;
+ int ret = -EINVAL;
+
+ chip = xzalloc(sizeof(*chip));
+
+ res = dev_get_resource(dev, IORESOURCE_MEM, 0);
+ if (!res)
+ goto err;
+
+ rsize = resource_size(res);
+ chip->gc.ngpio = rsize / sizeof(int32_t);
+
+ chip->base = dev_request_mem_region(dev, 0);
+ chip->gc.ops = &digic_gpio_ops;
+ chip->gc.base = 0;
+
+ chip->gc.dev = dev;
+
+ ret = gpiochip_add(&chip->gc);
+ if (ret) {
+ dev_err(dev, "couldn't add gpiochip, ret = %d\n", ret);
+ goto err;
+ }
+
+ dev_info(dev, "probed gpiochip%d with base %d\n",
+ dev->id, chip->gc.base);
+
+ return 0;
+
+err:
+ kfree(chip);
+
+ return ret;
+}
+
+static __maybe_unused struct of_device_id digic_gpio_dt_ids[] = {
+ {
+ .compatible = "canon,digic-gpio",
+ }, {
+ /* sentinel */
+ }
+};
+
+static struct driver_d digic_gpio_driver = {
+ .name = "digic-gpio",
+ .probe = digic_gpio_probe,
+ .of_compatible = DRV_OF_COMPAT(digic_gpio_dt_ids),
+};
+
+static int digic_gpio_init(void)
+{
+ return platform_driver_register(&digic_gpio_driver);
+}
+coredevice_initcall(digic_gpio_init);
--
2.0.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2014-07-28 21:16 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-28 21:15 [PATCH v2 00/11] ARM: add support for Canon DIGIC chips and Canon PowerShot A1100 IS Antony Pavlov
2014-07-28 21:15 ` [PATCH v2 01/11] ARM: add ARM946E-S CPU type Antony Pavlov
2014-07-28 21:15 ` [PATCH v2 02/11] ARM: add very initial support for Canon DIGIC chips Antony Pavlov
2014-07-28 21:15 ` [PATCH v2 03/11] clocksource: add driver for Canon DIGIC timer Antony Pavlov
2014-07-28 21:15 ` [PATCH v2 04/11] serial: add driver for Canon DIGIC UART Antony Pavlov
2014-07-28 21:15 ` Antony Pavlov [this message]
2014-07-28 21:15 ` [PATCH v2 06/11] ARM: DIGIC: add Canon PowerShot A1100 IS support Antony Pavlov
2014-07-28 21:15 ` [PATCH v2 07/11] ARM: add Canon A1100 ROM image generation Antony Pavlov
2014-07-28 21:15 ` [PATCH v2 08/11] ARM: DIGIC: add canon-a1100_defconfig Antony Pavlov
2014-07-28 21:15 ` [PATCH v2 09/11] Documentation: add QEMU Canon A1100 barebox mini-howto Antony Pavlov
2014-07-28 21:15 ` [PATCH v2 10/11] ARM: add Canon A1100 DISKBOOT.BIN image generation stuff Antony Pavlov
2014-07-28 21:15 ` [PATCH v2 11/11] Documentation: add real Canon A1100 camera barebox mini-howto Antony Pavlov
2014-07-29 13:20 ` [PATCH v2 00/11] ARM: add support for Canon DIGIC chips and Canon PowerShot A1100 IS Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1406582130-10116-6-git-send-email-antonynpavlov@gmail.com \
--to=antonynpavlov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox