From: Bo Shen <voice.shen@atmel.com>
To: s.hauer@pengutronix.de
Cc: barebox@lists.infradead.org
Subject: [PATCH] ARM: atmel: sama5d3_xplained: import smc timing from U-Boot
Date: Fri, 1 Aug 2014 16:06:36 +0800 [thread overview]
Message-ID: <1406880396-3577-1-git-send-email-voice.shen@atmel.com> (raw)
From: Matteo Fortini <matteo.fortini@gmail.com>
The configuration for NAND has been aligned with values
from U-Boot and completed with TIMINGS initialization
Signed-off-by: Matteo Fortini <matteo.fortini@gmail.com>
[voice.shen@atmel.com: apply this patch from Matteo Fortini for
sama5d3xek to sama5d3_xplained board]
Signed-off-by: Bo Shen <voice.shen@atmel.com>
---
arch/arm/boards/sama5d3_xplained/init.c | 29 +++++++++++++++++++----------
1 file changed, 19 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boards/sama5d3_xplained/init.c b/arch/arm/boards/sama5d3_xplained/init.c
index ae18863..5674225 100644
--- a/arch/arm/boards/sama5d3_xplained/init.c
+++ b/arch/arm/boards/sama5d3_xplained/init.c
@@ -57,21 +57,30 @@ static struct atmel_nand_data nand_pdata = {
};
static struct sam9_smc_config sama5d3_xplained_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 1,
- .ncs_write_setup = 0,
- .nwe_setup = 1,
+ .ncs_read_setup = 1,
+ .nrd_setup = 2,
+ .ncs_write_setup = 1,
+ .nwe_setup = 2,
- .ncs_read_pulse = 6,
- .nrd_pulse = 4,
+ .ncs_read_pulse = 5,
+ .nrd_pulse = 3,
.ncs_write_pulse = 5,
.nwe_pulse = 3,
- .read_cycle = 6,
- .write_cycle = 5,
+ .read_cycle = 8,
+ .write_cycle = 8,
.mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
- .tdf_cycles = 1,
+ .tdf_cycles = 3,
+
+ .tclr = 3,
+ .tadl = 10,
+ .tar = 3,
+ .ocms = 0,
+ .trr = 4,
+ .twb = 5,
+ .rbnsel = 3,
+ .nfsel = 1
};
static void ek_add_device_nand(void)
@@ -87,7 +96,7 @@ static void ek_add_device_nand(void)
sama5d3_xplained_nand_smc_config.mode |= AT91_SMC_DBW_8;
/* configure chip-select 3 (NAND) */
- sam9_smc_configure(0, 3, &sama5d3_xplained_nand_smc_config);
+ sama5_smc_configure(0, 3, &cm_nand_smc_config);
at91_add_device_nand(&nand_pdata);
}
--
1.8.5.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2014-08-01 8:06 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-01 8:06 Bo Shen [this message]
2014-08-01 16:28 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1406880396-3577-1-git-send-email-voice.shen@atmel.com \
--to=voice.shen@atmel.com \
--cc=barebox@lists.infradead.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox