mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: "Raphaël Poggi" <poggi.raph@gmail.com>
To: barebox@lists.infradead.org
Cc: "Raphaël Poggi" <poggi.raph@gmail.com>
Subject: [PATCH 5/5] board: atmel: initialise ecc_mode
Date: Fri,  1 Aug 2014 15:23:24 +0200	[thread overview]
Message-ID: <1406899404-29094-6-git-send-email-poggi.raph@gmail.com> (raw)
In-Reply-To: <1406899404-29094-1-git-send-email-poggi.raph@gmail.com>

This commit initialise the ecc_mode (NAND_ECC_SOFT) on atmel board init which missing it.

Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com>
---
 arch/arm/boards/at91sam9260ek/init.c    |    1 +
 arch/arm/boards/at91sam9261ek/init.c    |    1 +
 arch/arm/boards/at91sam9263ek/init.c    |    1 +
 arch/arm/boards/at91sam9m10g45ek/init.c |    1 +
 arch/arm/boards/at91sam9m10ihd/init.c   |    1 +
 5 files changed, 5 insertions(+)

diff --git a/arch/arm/boards/at91sam9260ek/init.c b/arch/arm/boards/at91sam9260ek/init.c
index 1298dde..76e0195 100644
--- a/arch/arm/boards/at91sam9260ek/init.c
+++ b/arch/arm/boards/at91sam9260ek/init.c
@@ -51,6 +51,7 @@ static struct atmel_nand_data nand_pdata = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
+	.ecc_mode	= NAND_ECC_SOFT,
 	.on_flash_bbt	= 1,
 };
 
diff --git a/arch/arm/boards/at91sam9261ek/init.c b/arch/arm/boards/at91sam9261ek/init.c
index 9ebc16a..7b8ce98 100644
--- a/arch/arm/boards/at91sam9261ek/init.c
+++ b/arch/arm/boards/at91sam9261ek/init.c
@@ -46,6 +46,7 @@ static struct atmel_nand_data nand_pdata = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PC15,
 	.enable_pin	= AT91_PIN_PC14,
+	.ecc_mode	= NAND_ECC_SOFT,
 #if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
diff --git a/arch/arm/boards/at91sam9263ek/init.c b/arch/arm/boards/at91sam9263ek/init.c
index 889b4c2..c8a9d5c 100644
--- a/arch/arm/boards/at91sam9263ek/init.c
+++ b/arch/arm/boards/at91sam9263ek/init.c
@@ -43,6 +43,7 @@ static struct atmel_nand_data nand_pdata = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PA22,
 	.enable_pin	= AT91_PIN_PD15,
+	.ecc_mode	= NAND_ECC_SOFT,
 #if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
diff --git a/arch/arm/boards/at91sam9m10g45ek/init.c b/arch/arm/boards/at91sam9m10g45ek/init.c
index 6503ebb..cdd7806 100644
--- a/arch/arm/boards/at91sam9m10g45ek/init.c
+++ b/arch/arm/boards/at91sam9m10g45ek/init.c
@@ -67,6 +67,7 @@ static struct atmel_nand_data nand_pdata = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PC8,
 	.enable_pin	= AT91_PIN_PC14,
+	.ecc_mode	= NAND_ECC_SOFT,
 #if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
diff --git a/arch/arm/boards/at91sam9m10ihd/init.c b/arch/arm/boards/at91sam9m10ihd/init.c
index fc37af4..a432e5c 100644
--- a/arch/arm/boards/at91sam9m10ihd/init.c
+++ b/arch/arm/boards/at91sam9m10ihd/init.c
@@ -44,6 +44,7 @@ static struct atmel_nand_data nand_pdata = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PC15,
 	.enable_pin	= AT91_PIN_PC14,
+	.ecc_mode	= NAND_ECC_SOFT,
 	.bus_width_16	= 0,
 	.on_flash_bbt	= 1,
 };
-- 
1.7.9.5


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      parent reply	other threads:[~2014-08-01 13:22 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-01 13:23 [PATCH 0/5] Add device tree support of Atmel NAND driver Raphaël Poggi
2014-08-01 13:23 ` [PATCH 1/5] mtd: atmel_nand: add support for device tree Raphaël Poggi
2014-08-04 17:43   ` Sascha Hauer
2014-08-04 18:26     ` Raphaël Poggi
2014-08-01 13:23 ` [PATCH 2/5] mtd: nand: remove NAND_ATMEL_PMECC Raphaël Poggi
2014-08-01 13:23 ` [PATCH 3/5] board: atmel: initialise the has_pmecc member Raphaël Poggi
2014-08-01 13:23 ` [PATCH 4/5] mtd: atmel_nand: retrieve ecc_mode from pdata Raphaël Poggi
2014-08-01 13:23 ` Raphaël Poggi [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1406899404-29094-6-git-send-email-poggi.raph@gmail.com \
    --to=poggi.raph@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox