mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: "Raphaël Poggi" <poggi.raph@gmail.com>
To: barebox@lists.infradead.org
Cc: "Raphaël Poggi" <poggi.raph@gmail.com>
Subject: [PATCH 5/5] mtd: atmel_nand: add support for device tree
Date: Tue,  5 Aug 2014 11:14:49 +0200	[thread overview]
Message-ID: <1407230089-26948-6-git-send-email-poggi.raph@gmail.com> (raw)
In-Reply-To: <1407230089-26948-1-git-send-email-poggi.raph@gmail.com>

Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com>
---
 drivers/mtd/nand/atmel_nand.c |  111 ++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 110 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 780d266..a5d05d8 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -28,6 +28,10 @@
 #include <init.h>
 #include <gpio.h>
 
+#include <of.h>
+#include <of_gpio.h>
+#include <of_mtd.h>
+
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 
@@ -1038,6 +1042,92 @@ static void atmel_nand_hwctl(struct mtd_info *mtd, int mode)
 #endif
 }
 
+static int atmel_nand_of_init(struct atmel_nand_host *host, struct device_node *np)
+{
+	u32 val;
+	u32 offset[2];
+	int ecc_mode;
+	struct atmel_nand_data *board = host->board;
+	enum of_gpio_flags flags = 0;
+
+	if (!IS_ENABLED(CONFIG_OFDEVICE))
+		return -ENOSYS;
+
+	if (of_property_read_u32(np, "atmel,nand-addr-offset", &val) == 0) {
+		if (val >= 32) {
+			dev_err(host->dev, "invalid addr-offset %u\n", val);
+			return -EINVAL;
+		}
+		board->ale = val;
+	}
+
+	if (of_property_read_u32(np, "atmel,nand-cmd-offset", &val) == 0) {
+		if (val >= 32) {
+			dev_err(host->dev, "invalid cmd-offset %u\n", val);
+			return -EINVAL;
+		}
+		board->cle = val;
+	}
+
+	ecc_mode = of_get_nand_ecc_mode(np);
+
+	board->ecc_mode = ecc_mode < 0 ? NAND_ECC_SOFT : ecc_mode;
+
+	board->on_flash_bbt = of_get_nand_on_flash_bbt(np);
+
+	if (of_get_nand_bus_width(np) == 16)
+		board->bus_width_16 = 1;
+
+	board->rdy_pin = of_get_gpio_flags(np, 0, &flags);
+	board->enable_pin = of_get_gpio(np, 1);
+	board->det_pin = of_get_gpio(np, 2);
+
+	board->has_pmecc = of_property_read_bool(np, "atmel,has-pmecc");
+
+	if (!(board->ecc_mode == NAND_ECC_HW) || !board->has_pmecc)
+		return 0;	/* Not using PMECC */
+
+	/* use PMECC, get correction capability, sector size and lookup
+	* table offset.
+	* If correction bits and sector size are not specified, then
+	*   find
+	* them from NAND ONFI parameters.
+	*/
+	if (of_property_read_u32(np, "atmel,pmecc-cap", &val) == 0) {
+		if ((val != 2) && (val != 4) && (val != 8) && (val != 12) && (val != 24)) {
+			dev_err(host->dev, "Unsupported PMECC correction capability: %d"
+					" should be 2, 4, 8, 12 or 24\n", val);
+			return -EINVAL;
+		}
+
+		board->pmecc_corr_cap = (u8)val;
+	}
+
+	if (of_property_read_u32(np, "atmel,pmecc-sector-size", &val) == 0) {
+		if ((val != 512) && (val != 1024)) {
+				dev_err(host->dev, "Unsupported PMECC sector size: %d"
+					" should be 512 or 1024 bytes\n", val);
+			return -EINVAL;
+		}
+
+		board->pmecc_sector_size = (u16)val;
+	}
+
+	if (of_property_read_u32_array(np, "atmel,pmecc-lookup-table-offset", offset, 2) != 0) {
+		dev_err(host->dev, "Cannot get PMECC lookup table offset\n");
+		return -EINVAL;
+	}
+
+	if (!offset[0] && !offset[1]) {
+		dev_err(host->dev, "Invalid PMECC lookup table offset\n");
+		return -EINVAL;
+	}
+
+	board->pmecc_lookup_table_offset = (board->pmecc_sector_size == 512) ? offset[0] : offset[1];
+
+	return 0;
+}
+
 static int atmel_hw_nand_init_params(struct device_d *dev,
 					 struct atmel_nand_host *host)
 {
@@ -1093,7 +1183,7 @@ static int atmel_hw_nand_init_params(struct device_d *dev,
  */
 static int __init atmel_nand_probe(struct device_d *dev)
 {
-	struct atmel_nand_data *pdata = dev->platform_data;
+	struct atmel_nand_data *pdata = NULL;
 	struct atmel_nand_host *host;
 	struct mtd_info *mtd;
 	struct nand_chip *nand_chip;
@@ -1111,6 +1201,18 @@ static int __init atmel_nand_probe(struct device_d *dev)
 	host->board = pdata;
 	host->dev = dev;
 
+	if (dev->device_node) {
+		res = atmel_nand_of_init(host, dev->device_node);
+		if (res)
+			goto err_no_card;
+	} else {
+		pdata = kzalloc(sizeof(struct atmel_nand_data), GFP_KERNEL);
+		if (!pdata)
+			return -ENOMEM;
+
+		memcpy(host->board, dev->platform_data, sizeof(struct atmel_nand_data));
+	}
+
 	nand_chip->priv = host;		/* link the private data structures */
 	mtd->priv = nand_chip;
 	mtd->parent = dev;
@@ -1245,13 +1347,20 @@ err_hw_ecc:
 err_scan_ident:
 err_no_card:
 	atmel_nand_disable(host);
+	kfree(pdata);
 	kfree(host);
 	return res;
 }
 
+static struct of_device_id atmel_nand_dt_ids[] = {
+	{ .compatible = "atmel,at91rm9200-nand" },
+	{ /* sentinel */ }
+};
+
 static struct driver_d atmel_nand_driver = {
 	.name	= "atmel_nand",
 	.probe	= atmel_nand_probe,
+	.of_compatible	= DRV_OF_COMPAT(atmel_nand_dt_ids),
 };
 device_platform_driver(atmel_nand_driver);
 
-- 
1.7.9.5


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2014-08-05  9:14 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-05  9:14 [PATCH v2 0/5] Add device tree support of Atmel NAND driver Raphaël Poggi
2014-08-05  9:14 ` [PATCH 1/5] mtd: nand: remove NAND_ATMEL_PMECC Raphaël Poggi
2014-08-06  4:08   ` Jean-Christophe PLAGNIOL-VILLARD
2014-08-06  7:21     ` Raphaël Poggi
2014-09-01  9:49       ` Sascha Hauer
2014-08-05  9:14 ` [PATCH 2/5] board: atmel: initialise the has_pmecc member Raphaël Poggi
2014-08-05  9:14 ` [PATCH 3/5] mtd: atmel_nand: retrieve ecc_mode from pdata Raphaël Poggi
2014-08-05  9:14 ` [PATCH 4/5] board: atmel: initialise ecc_mode Raphaël Poggi
2014-09-01  9:54   ` Sascha Hauer
2014-08-05  9:14 ` Raphaël Poggi [this message]
2014-08-05  9:40 ` [PATCH v2 0/5] Add device tree support of Atmel NAND driver Raphaël Poggi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1407230089-26948-6-git-send-email-poggi.raph@gmail.com \
    --to=poggi.raph@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox