From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
To: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
barebox@lists.infradead.org
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Subject: [RFC] ARM: mvebu: Add Plathome Kirkwood Openblocks A6 board support
Date: Mon, 11 Aug 2014 09:49:11 -0300 [thread overview]
Message-ID: <1407761351-12344-1-git-send-email-ezequiel.garcia@free-electrons.com> (raw)
This commit adds a new Marvell Kirkwood-based board. This is an almost blind
copy-paste of the currently supported boards, and so I'm sending it as an RFC.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
---
arch/arm/boards/Makefile | 1 +
arch/arm/boards/plathome-openblocks-a6/Makefile | 2 ++
arch/arm/boards/plathome-openblocks-a6/board.c | 1 +
arch/arm/boards/plathome-openblocks-a6/lowlevel.c | 32 +++++++++++++++++++++++
arch/arm/dts/Makefile | 1 +
arch/arm/dts/kirkwood-openblocks_a6-bb.dts | 11 ++++++++
arch/arm/mach-mvebu/Kconfig | 3 +++
images/Makefile.mvebu | 11 ++++++++
8 files changed, 62 insertions(+)
create mode 100644 arch/arm/boards/plathome-openblocks-a6/Makefile
create mode 100644 arch/arm/boards/plathome-openblocks-a6/board.c
create mode 100644 arch/arm/boards/plathome-openblocks-a6/lowlevel.c
create mode 100644 arch/arm/dts/kirkwood-openblocks_a6-bb.dts
diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
index c60da81..122f5cd 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
@@ -79,6 +79,7 @@ obj-$(CONFIG_MACH_PCM049) += phytec-phycore-omap4460/
obj-$(CONFIG_MACH_PCM051) += phytec-phycore-am335x/
obj-$(CONFIG_MACH_PHYTEC_PFLA02) += phytec-phyflex-imx6/
obj-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_AX3) += plathome-openblocks-ax3/
+obj-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_A6) += plathome-openblocks-a6/
obj-$(CONFIG_MACH_PM9261) += pm9261/
obj-$(CONFIG_MACH_PM9263) += pm9263/
obj-$(CONFIG_MACH_PM9G45) += pm9g45/
diff --git a/arch/arm/boards/plathome-openblocks-a6/Makefile b/arch/arm/boards/plathome-openblocks-a6/Makefile
new file mode 100644
index 0000000..01c7a25
--- /dev/null
+++ b/arch/arm/boards/plathome-openblocks-a6/Makefile
@@ -0,0 +1,2 @@
+obj-y += board.o
+lwl-y += lowlevel.o
diff --git a/arch/arm/boards/plathome-openblocks-a6/board.c b/arch/arm/boards/plathome-openblocks-a6/board.c
new file mode 100644
index 0000000..40a8c17
--- /dev/null
+++ b/arch/arm/boards/plathome-openblocks-a6/board.c
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/arm/boards/plathome-openblocks-a6/lowlevel.c b/arch/arm/boards/plathome-openblocks-a6/lowlevel.c
new file mode 100644
index 0000000..b37a3d6
--- /dev/null
+++ b/arch/arm/boards/plathome-openblocks-a6/lowlevel.c
@@ -0,0 +1,32 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <sizes.h>
+#include <asm/barebox-arm.h>
+#include <asm/barebox-arm-head.h>
+#include <mach/lowlevel.h>
+
+extern char __dtb_kirkwood_openblocks_a6_bb_start[];
+
+ENTRY_FUNCTION(start_plathome_openblocks_a6, r0, r1, r2)
+{
+ void *fdt;
+
+ arm_cpu_lowlevel_init();
+
+ fdt = __dtb_kirkwood_openblocks_a6_bb_start -
+ get_runtime_offset();
+
+ mvebu_barebox_entry(fdt);
+}
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 9bff8a0..4b8d58a 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -23,6 +23,7 @@ pbl-dtb-$(CONFIG_MACH_PCM038) += imx27-phytec-phycore-rdk.dtb.o
pbl-dtb-$(CONFIG_MACH_PCM051) += am335x-phytec-phycore.dtb.o
pbl-dtb-$(CONFIG_MACH_PHYTEC_PFLA02) += imx6s-phytec-pbab01.dtb.o imx6dl-phytec-pbab01.dtb.o imx6q-phytec-pbab01.dtb.o
pbl-dtb-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_AX3) += armada-xp-openblocks-ax3-4-bb.dtb.o
+pbl-dtb-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_A6) += kirkwood-openblocks_a6-bb.dtb.o
pbl-dtb-$(CONFIG_MACH_RADXA_ROCK) += rk3188-radxarock.dtb.o
pbl-dtb-$(CONFIG_MACH_REALQ7) += imx6q-dmo-edmqmx6.dtb.o
pbl-dtb-$(CONFIG_MACH_SABRELITE) += imx6q-sabrelite.dtb.o imx6dl-sabrelite.dtb.o
diff --git a/arch/arm/dts/kirkwood-openblocks_a6-bb.dts b/arch/arm/dts/kirkwood-openblocks_a6-bb.dts
new file mode 100644
index 0000000..84e06cd
--- /dev/null
+++ b/arch/arm/dts/kirkwood-openblocks_a6-bb.dts
@@ -0,0 +1,11 @@
+/*
+ * Barebox specific DT overlay for OpenBlocks A6 board
+ */
+
+#include "arm/kirkwood-openblocks_a6.dts"
+
+/ {
+ chosen {
+ stdout-path = "/ocp@f1000000/serial@12000";
+ };
+};
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 131f3a6..3270f92 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -81,6 +81,9 @@ if ARCH_KIRKWOOD
config MACH_GLOBALSCALE_GURUPLUG
bool "Guruplug"
+config MACH_PLATHOME_OPENBLOCKS_A6
+ bool "PlatHome OpenBlocks A6"
+
config MACH_USI_TOPKICK
bool "Topkick"
diff --git a/images/Makefile.mvebu b/images/Makefile.mvebu
index 009807d..5e90855 100644
--- a/images/Makefile.mvebu
+++ b/images/Makefile.mvebu
@@ -72,6 +72,17 @@ image-$(CONFIG_MACH_GLOBALSCALE_GURUPLUG) += barebox-globalscale-guruplug.img
image-$(CONFIG_MACH_GLOBALSCALE_GURUPLUG) += barebox-globalscale-guruplug-uart.img
image-$(CONFIG_MACH_GLOBALSCALE_GURUPLUG) += barebox-globalscale-guruplug-2nd.img
+PLATHOME_OPENBLOCKS_A6_KWBOPTS = ${KWBOPTS} -i $(board)/plathome-openblocks-a6/kwbimage.cfg
+OPTS_start_plathome_openblocks_a6.pblx.kwbimg = $(PLATHOME_OPENBLOCKS_A6_KWBOPTS)
+OPTS_start_plathome_openblocks_a6.pblx.kwbuartimg = -m uart $(PLATHOME_OPENBLOCKS_A6_KWBOPTS)
+FILE_barebox-plathome-openblocks-a6.img = start_plathome_openblocks_a6.pblx.kwbimg
+FILE_barebox-plathome-openblocks-a6-uart.img = start_plathome_openblocks_a6.pblx.kwbuartimg
+FILE_barebox-plathome-openblocks-a6-2nd.img = start_plathome_openblocks_a6.pblx
+pblx-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_A6) += start_plathome_openblocks_a6
+image-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_A6) += barebox-plathome-openblocks-a6.img
+image-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_A6) += barebox-plathome-openblocks-a6-uart.img
+image-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_A6) += barebox-plathome-openblocks-a6-2nd.img
+
USI_TOPKICK_KWBOPTS = ${KWBOPTS} -i $(board)/usi-topkick/kwbimage.cfg
OPTS_start_usi_topkick.pblx.kwbimg = $(USI_TOPKICK_KWBOPTS)
OPTS_start_usi_topkick.pblx.kwbuartimg = -m uart $(USI_TOPKICK_KWBOPTS)
--
2.0.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2014-08-11 12:50 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-11 12:49 Ezequiel Garcia [this message]
2014-08-11 18:23 ` Sebastian Hesselbarth
2014-08-11 20:31 ` Ezequiel Garcia
2014-08-11 21:15 ` Sebastian Hesselbarth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1407761351-12344-1-git-send-email-ezequiel.garcia@free-electrons.com \
--to=ezequiel.garcia@free-electrons.com \
--cc=barebox@lists.infradead.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=thomas.petazzoni@free-electrons.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox