From: "Raphaël Poggi" <poggi.raph@gmail.com>
To: barebox@lists.infradead.org
Cc: "Raphaël Poggi" <poggi.raph@gmail.com>
Subject: [PATCH v3 2/3] pinctrl: at91: add pinctrl driver
Date: Tue, 2 Sep 2014 13:07:59 +0200 [thread overview]
Message-ID: <1409656080-19280-3-git-send-email-poggi.raph@gmail.com> (raw)
In-Reply-To: <1409656080-19280-1-git-send-email-poggi.raph@gmail.com>
This driver is based on mach-at91/gpio.c and linux pinctrl driver.
The driver contains the gpio and pinctrl parts (like in linux) because the two parts
share some structures and logics.
Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com>
---
drivers/pinctrl/Kconfig | 6 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-at91.c | 527 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 534 insertions(+)
create mode 100644 drivers/pinctrl/pinctrl-at91.c
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index dffaa4e..ce55c7b 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -7,6 +7,12 @@ config PINCTRL
from the devicetree. Legacy drivers here may not need this core
support but instead provide their own SoC specific APIs
+config PINCTRL_AT91
+ select PINCTRL
+ bool
+ help
+ The pinmux controller found on AT91 SoCs.
+
config PINCTRL_IMX_IOMUX_V1
select PINCTRL if OFDEVICE
bool
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 566ba11..3ea8649 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -1,4 +1,5 @@
obj-$(CONFIG_PINCTRL) += pinctrl.o
+obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o
obj-$(CONFIG_PINCTRL_IMX_IOMUX_V1) += imx-iomux-v1.o
obj-$(CONFIG_PINCTRL_IMX_IOMUX_V2) += imx-iomux-v2.o
obj-$(CONFIG_PINCTRL_IMX_IOMUX_V3) += imx-iomux-v3.o
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
new file mode 100644
index 0000000..433862a
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -0,0 +1,527 @@
+/*
+ * Copyright (C) 2005 HP Labs
+ * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ * Copyright (C) 2014 Raphaël Poggi
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <complete.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <errno.h>
+#include <io.h>
+#include <gpio.h>
+#include <init.h>
+#include <driver.h>
+#include <getopt.h>
+
+#include <mach/at91_pio.h>
+#include <mach/gpio.h>
+
+#include <pinctrl.h>
+
+struct at91_pinctrl {
+ struct pinctrl_device pctl;
+ struct at91_pinctrl_mux_ops *ops;
+};
+
+struct at91_gpio_chip {
+ struct gpio_chip chip;
+ void __iomem *regbase; /* PIO bank virtual address */
+ struct at91_pinctrl_mux_ops *ops; /* ops */
+};
+
+enum at91_mux {
+ AT91_MUX_GPIO = 0,
+ AT91_MUX_PERIPH_A = 1,
+ AT91_MUX_PERIPH_B = 2,
+ AT91_MUX_PERIPH_C = 3,
+ AT91_MUX_PERIPH_D = 4,
+};
+
+#define MAX_GPIO_BANKS 5
+#define to_at91_pinctrl(c) container_of(c, struct at91_pinctrl, pctl);
+#define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip)
+
+#define PULL_UP (1 << 0)
+#define MULTI_DRIVE (1 << 1)
+#define DEGLITCH (1 << 2)
+#define PULL_DOWN (1 << 3)
+#define DIS_SCHMIT (1 << 4)
+#define DEBOUNCE (1 << 16)
+#define DEBOUNCE_VAL_SHIFT 17
+#define DEBOUNCE_VAL (0x3fff << DEBOUNCE_VAL_SHIFT)
+
+static int gpio_banks;
+
+static struct at91_gpio_chip gpio_chip[MAX_GPIO_BANKS];
+
+static inline void __iomem *pin_to_controller(struct at91_pinctrl *info, unsigned pin)
+{
+ pin /= MAX_NB_GPIO_PER_BANK;
+ if (likely(pin < gpio_banks))
+ return gpio_chip[pin].regbase;
+
+ return NULL;
+}
+
+/**
+ * struct at91_pinctrl_mux_ops - describes an At91 mux ops group
+ * on new IP with support for periph C and D the way to mux in
+ * periph A and B has changed
+ * So provide the right call back
+ * if not present means the IP does not support it
+ * @get_periph: return the periph mode configured
+ * @mux_A_periph: mux as periph A
+ * @mux_B_periph: mux as periph B
+ * @mux_C_periph: mux as periph C
+ * @mux_D_periph: mux as periph D
+ * @set_deglitch: enable/disable deglitch
+ * @set_debounce: enable/disable debounce
+ * @set_pulldown: enable/disable pulldown
+ * @disable_schmitt_trig: disable schmitt trigger
+ */
+struct at91_pinctrl_mux_ops {
+ enum at91_mux (*get_periph)(void __iomem *pio, unsigned mask);
+ void (*mux_A_periph)(void __iomem *pio, unsigned mask);
+ void (*mux_B_periph)(void __iomem *pio, unsigned mask);
+ void (*mux_C_periph)(void __iomem *pio, unsigned mask);
+ void (*mux_D_periph)(void __iomem *pio, unsigned mask);
+ bool (*get_deglitch)(void __iomem *pio, unsigned pin);
+ void (*set_deglitch)(void __iomem *pio, unsigned mask, bool in_on);
+ bool (*get_debounce)(void __iomem *pio, unsigned pin, u32 *div);
+ void (*set_debounce)(void __iomem *pio, unsigned mask, bool in_on, u32 div);
+ bool (*get_pulldown)(void __iomem *pio, unsigned pin);
+ void (*set_pulldown)(void __iomem *pio, unsigned mask, bool in_on);
+ bool (*get_schmitt_trig)(void __iomem *pio, unsigned pin);
+ void (*disable_schmitt_trig)(void __iomem *pio, unsigned mask);
+};
+
+static enum at91_mux at91_mux_pio3_get_periph(void __iomem *pio, unsigned mask)
+{
+ unsigned select;
+
+ if (__raw_readl(pio + PIO_PSR) & mask)
+ return AT91_MUX_GPIO;
+
+ select = !!(__raw_readl(pio + PIO_ABCDSR1) & mask);
+ select |= (!!(__raw_readl(pio + PIO_ABCDSR2) & mask) << 1);
+
+ return select + 1;
+}
+
+static enum at91_mux at91_mux_get_periph(void __iomem *pio, unsigned mask)
+{
+ unsigned select;
+
+ if (__raw_readl(pio + PIO_PSR) & mask)
+ return AT91_MUX_GPIO;
+
+ select = __raw_readl(pio + PIO_ABSR) & mask;
+
+ return select + 1;
+}
+
+static bool at91_mux_get_deglitch(void __iomem *pio, unsigned pin)
+{
+ return (__raw_readl(pio + PIO_IFSR) >> pin) & 0x1;
+}
+
+static bool at91_mux_pio3_get_debounce(void __iomem *pio, unsigned pin, u32 *div)
+{
+ *div = __raw_readl(pio + PIO_SCDR);
+
+ return (__raw_readl(pio + PIO_IFSCSR) >> pin) & 0x1;
+}
+
+static bool at91_mux_pio3_get_pulldown(void __iomem *pio, unsigned pin)
+{
+ return (__raw_readl(pio + PIO_PPDSR) >> pin) & 0x1;
+}
+
+static bool at91_mux_pio3_get_schmitt_trig(void __iomem *pio, unsigned pin)
+{
+ return (__raw_readl(pio + PIO_SCHMITT) >> pin) & 0x1;
+}
+
+static struct at91_pinctrl_mux_ops at91rm9200_ops = {
+ .get_periph = at91_mux_get_periph,
+ .mux_A_periph = at91_mux_set_A_periph,
+ .mux_B_periph = at91_mux_set_B_periph,
+ .get_deglitch = at91_mux_get_deglitch,
+ .set_deglitch = at91_mux_set_deglitch,
+};
+
+static struct at91_pinctrl_mux_ops at91sam9x5_ops = {
+ .get_periph = at91_mux_pio3_get_periph,
+ .mux_A_periph = at91_mux_pio3_set_A_periph,
+ .mux_B_periph = at91_mux_pio3_set_B_periph,
+ .mux_C_periph = at91_mux_pio3_set_C_periph,
+ .mux_D_periph = at91_mux_pio3_set_D_periph,
+ .get_deglitch = at91_mux_get_deglitch,
+ .set_deglitch = at91_mux_pio3_set_deglitch,
+ .get_debounce = at91_mux_pio3_get_debounce,
+ .set_debounce = at91_mux_pio3_set_debounce,
+ .get_pulldown = at91_mux_pio3_get_pulldown,
+ .set_pulldown = at91_mux_pio3_set_pulldown,
+ .get_schmitt_trig = at91_mux_pio3_get_schmitt_trig,
+ .disable_schmitt_trig = at91_mux_pio3_disable_schmitt_trig,
+};
+
+static int at91_mux_pin(struct at91_pinctrl *info, unsigned pin, enum at91_mux mux, int use_pullup)
+{
+ void __iomem *pio = pin_to_controller(info, pin);
+ unsigned mask = pin_to_mask(pin);
+
+ if (!info)
+ return -EINVAL;
+
+ if (!pio)
+ return -EINVAL;
+
+ at91_mux_disable_interrupt(pio, mask);
+
+ switch (mux) {
+ case AT91_MUX_GPIO:
+ at91_mux_gpio_enable(pio, mask);
+ break;
+ case AT91_MUX_PERIPH_A:
+ info->ops->mux_A_periph(pio, mask);
+ break;
+ case AT91_MUX_PERIPH_B:
+ info->ops->mux_B_periph(pio, mask);
+ break;
+ case AT91_MUX_PERIPH_C:
+ if (!info->ops->mux_C_periph)
+ return -EINVAL;
+ info->ops->mux_C_periph(pio, mask);
+ break;
+ case AT91_MUX_PERIPH_D:
+ if (!info->ops->mux_D_periph)
+ return -EINVAL;
+ info->ops->mux_D_periph(pio, mask);
+ break;
+ }
+ if (mux)
+ at91_mux_gpio_disable(pio, mask);
+
+ if (use_pullup >= 0)
+ at91_mux_set_pullup(pio, mask, use_pullup);
+
+ return 0;
+}
+
+static struct of_device_id at91_pinctrl_dt_ids[] = {
+ {
+ .compatible = "atmel,at91rm9200-pinctrl",
+ .data = (unsigned long)&at91rm9200_ops,
+ }, {
+ .compatible = "atmel,at91sam9x5-pinctrl",
+ .data = (unsigned long)&at91sam9x5_ops,
+ }, {
+ /* sentinel */
+ }
+};
+
+static struct at91_pinctrl_mux_ops *at91_pinctrl_get_driver_data(struct device_d *dev)
+{
+ struct at91_pinctrl_mux_ops *ops_data = NULL;
+ int rc;
+
+ if (dev->device_node) {
+ const struct of_device_id *match;
+ match = of_match_node(at91_pinctrl_dt_ids, dev->device_node);
+ if (!match)
+ ops_data = NULL;
+ else
+ ops_data = (struct at91_pinctrl_mux_ops *)match->data;
+ } else {
+ rc = dev_get_drvdata(dev, (unsigned long *)&ops_data);
+ if (rc)
+ ops_data = NULL;
+ }
+
+ return ops_data;
+}
+
+static int at91_pinctrl_set_conf(struct at91_pinctrl *info, unsigned int pin_num, unsigned int mux, unsigned int conf)
+{
+ unsigned int mask;
+ void __iomem *pio;
+
+ pio = pin_to_controller(info, pin_num);
+ mask = pin_to_mask(pin_num);
+
+ if (conf & PULL_UP && conf & PULL_DOWN)
+ return -EINVAL;
+
+ at91_mux_set_pullup(pio, mask, conf & PULL_UP);
+ at91_mux_set_multidrive(pio, mask, conf & MULTI_DRIVE);
+ if (info->ops->set_deglitch)
+ info->ops->set_deglitch(pio, mask, conf & DEGLITCH);
+ if (info->ops->set_debounce)
+ info->ops->set_debounce(pio, mask, conf & DEBOUNCE,
+ (conf & DEBOUNCE_VAL) >> DEBOUNCE_VAL_SHIFT);
+ if (info->ops->set_pulldown)
+ info->ops->set_pulldown(pio, mask, conf & PULL_DOWN);
+ if (info->ops->disable_schmitt_trig && conf & DIS_SCHMIT)
+ info->ops->disable_schmitt_trig(pio, mask);
+
+ return 0;
+}
+
+static int at91_pinctrl_set_state(struct pinctrl_device *pdev, struct device_node *np)
+{
+ struct at91_pinctrl *info;
+ const __be32 *list;
+ int i, size;
+ int ret = 0;
+ int bank_num, pin_num, mux, conf;
+
+ info = to_at91_pinctrl(pdev);
+
+ list = of_get_property(np, "atmel,pins", &size);
+ size /= sizeof(*list);
+
+ if (!size || size % 4) {
+ dev_err(pdev->dev, "wrong pins number or pins and configs should be by 4\n");
+ return -EINVAL;
+ }
+
+ for (i = 0; i < size; i += 4) {
+ bank_num = be32_to_cpu(*list++);
+ pin_num = be32_to_cpu(*list++);
+ mux = be32_to_cpu(*list++);
+ conf = be32_to_cpu(*list++);
+
+ ret = at91_mux_pin(info, pin_num, mux, conf & PULL_UP);
+ if (ret) {
+ dev_err(pdev->dev, "failed to mux pin %d\n", pin_num);
+ return ret;
+ }
+
+ ret = at91_pinctrl_set_conf(info, pin_num, mux, conf);
+ if (ret) {
+ dev_err(pdev->dev, "failed to set conf on pin %d\n", pin_num);
+ return ret;
+ }
+ }
+
+ return ret;
+}
+
+static struct pinctrl_ops at91_pinctrl_ops = {
+ .set_state = at91_pinctrl_set_state,
+};
+
+static int at91_pinctrl_probe(struct device_d *dev)
+{
+ struct at91_pinctrl *info;
+ int ret;
+
+ info = xzalloc(sizeof(struct at91_pinctrl));
+
+ info->ops = at91_pinctrl_get_driver_data(dev);
+ if (!info->ops) {
+ dev_err(dev, "failed to retrieve driver data\n");
+ return -ENODEV;
+ }
+
+ info->pctl.dev = dev;
+ info->pctl.ops = &at91_pinctrl_ops;
+
+ ret = pinctrl_register(&info->pctl);
+ if (ret)
+ return ret;
+
+ dev_info(dev, "AT91 pinctrl registered\n");
+
+ return 0;
+}
+
+static struct platform_device_id at91_pinctrl_ids[] = {
+ {
+ .name = "at91rm9200-pinctrl",
+ .driver_data = (unsigned long)&at91rm9200_ops,
+ }, {
+ .name = "at91sam9x5-pinctrl",
+ .driver_data = (unsigned long)&at91sam9x5_ops,
+ }, {
+ /* sentinel */
+ },
+};
+
+static struct driver_d at91_pinctrl_driver = {
+ .name = "pinctrl-at91",
+ .probe = at91_pinctrl_probe,
+ .id_table = at91_pinctrl_ids,
+ .of_compatible = DRV_OF_COMPAT(at91_pinctrl_dt_ids),
+};
+
+static int at91_pinctrl_init(void)
+{
+ return platform_driver_register(&at91_pinctrl_driver);
+}
+coredevice_initcall(at91_pinctrl_init);
+
+static int at91_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+ void __iomem *pio = at91_gpio->regbase;
+ unsigned mask = 1 << offset;
+
+ return at91_mux_gpio_get(pio, mask);
+}
+
+static void at91_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+ void __iomem *pio = at91_gpio->regbase;
+ unsigned mask = 1 << offset;
+
+ at91_mux_gpio_set(pio, mask, value);
+}
+
+static int at91_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+ void __iomem *pio = at91_gpio->regbase;
+ unsigned mask = 1 << offset;
+
+ at91_mux_gpio_set(pio, mask, value);
+ __raw_writel(mask, pio + PIO_OER);
+
+ return 0;
+}
+
+static int at91_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+ void __iomem *pio = at91_gpio->regbase;
+ unsigned mask = 1 << offset;
+
+ __raw_writel(mask, pio + PIO_ODR);
+
+ return 0;
+}
+
+static int at91_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+ void __iomem *pio = at91_gpio->regbase;
+ unsigned mask = 1 << offset;
+
+ dev_dbg(chip->dev, "%s:%d pio%c%d(%d)\n", __func__, __LINE__,
+ 'A' + pin_to_bank(chip->base), offset, chip->base + offset);
+ at91_mux_gpio_enable(pio, mask);
+
+ return 0;
+}
+
+static void at91_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ dev_dbg(chip->dev, "%s:%d pio%c%d(%d)\n", __func__, __LINE__,
+ 'A' + pin_to_bank(chip->base), offset, chip->base + offset);
+}
+
+static struct gpio_ops at91_gpio_ops = {
+ .request = at91_gpio_request,
+ .free = at91_gpio_free,
+ .direction_input = at91_gpio_direction_input,
+ .direction_output = at91_gpio_direction_output,
+ .get = at91_gpio_get,
+ .set = at91_gpio_set,
+};
+
+static struct of_device_id at91_gpio_dt_ids[] = {
+ {
+ .compatible = "atmel,at91rm9200-gpio",
+ }, {
+ .compatible = "atmel,at91sam9x5-gpio",
+ }, {
+ /* sentinel */
+ },
+};
+
+static int at91_gpio_probe(struct device_d *dev)
+{
+ struct at91_gpio_chip *at91_gpio;
+ struct clk *clk;
+ int ret;
+ int alias_idx = of_alias_get_id(dev->device_node, "gpio");
+
+ BUG_ON(dev->id > MAX_GPIO_BANKS);
+
+ at91_gpio = &gpio_chip[alias_idx];
+
+ clk = clk_get(dev, NULL);
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ dev_err(dev, "clock not found: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_enable(clk);
+ if (ret < 0) {
+ dev_err(dev, "clock failed to enable: %d\n", ret);
+ clk_put(clk);
+ return ret;
+ }
+
+ gpio_banks = max(gpio_banks, alias_idx + 1);
+ at91_gpio->regbase = dev_request_mem_region(dev, 0);
+
+ at91_gpio->chip.ops = &at91_gpio_ops;
+ at91_gpio->chip.ngpio = MAX_NB_GPIO_PER_BANK;
+ at91_gpio->chip.dev = dev;
+ at91_gpio->chip.base = dev->id * MAX_NB_GPIO_PER_BANK;
+
+ ret = gpiochip_add(&at91_gpio->chip);
+ if (ret) {
+ dev_err(dev, "couldn't add gpiochip, ret = %d\n", ret);
+ return ret;
+ }
+
+ dev_info(dev, "AT91 gpio driver registered\n");
+
+ return 0;
+}
+
+static struct platform_device_id at91_gpio_ids[] = {
+ {
+ .name = "at91rm9200-gpio",
+ }, {
+ .name = "at91sam9x5-gpio",
+ }, {
+ /* sentinel */
+ },
+};
+
+static struct driver_d at91_gpio_driver = {
+ .name = "gpio-at91",
+ .probe = at91_gpio_probe,
+ .id_table = at91_gpio_ids,
+ .of_compatible = DRV_OF_COMPAT(at91_gpio_dt_ids),
+};
+
+static int at91_gpio_init(void)
+{
+ return platform_driver_register(&at91_gpio_driver);
+}
+coredevice_initcall(at91_gpio_init);
--
1.7.9.5
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2014-09-02 11:08 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-02 11:07 [PATCH v3 0/3] Add atmel " Raphaël Poggi
2014-09-02 11:07 ` [PATCH v3 1/3] arm: mach-at91: move gpio.h to include folder Raphaël Poggi
2014-09-03 7:00 ` Sascha Hauer
2014-09-02 11:07 ` Raphaël Poggi [this message]
2014-09-03 6:56 ` [PATCH v3 2/3] pinctrl: at91: add pinctrl driver Sascha Hauer
2014-09-03 11:23 ` Raphaël Poggi
2014-09-03 13:52 ` Sascha Hauer
2014-09-03 15:10 ` Raphaël Poggi
2014-09-04 9:26 ` Sascha Hauer
2014-09-04 9:41 ` Raphaël Poggi
2014-09-02 11:08 ` [PATCH v3 3/3] at91sam9g45: add device tree gpio clocks Raphaël Poggi
2014-09-03 6:46 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409656080-19280-3-git-send-email-poggi.raph@gmail.com \
--to=poggi.raph@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox