From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 1/4] net: phy: introduce phy_aneg_done
Date: Thu, 18 Sep 2014 09:11:12 +0200 [thread overview]
Message-ID: <1411024275-31766-2-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1411024275-31766-1-git-send-email-s.hauer@pengutronix.de>
phy_wait_aneg_done() is directly called by the network code, so it
should not read phy registers directly. Introduce phy_aneg_done to
give phy drivers the chance to do something different to poll for
autonegotiation completion.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/net/phy/phy.c | 57 +++++++++++++++++++++++++++++++++++++++++----------
include/linux/phy.h | 4 ++++
2 files changed, 50 insertions(+), 11 deletions(-)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index cad4cf5..7604e1d 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -31,6 +31,21 @@
static struct phy_driver genphy_driver;
static int genphy_config_init(struct phy_device *phydev);
+/**
+ * phy_aneg_done - return auto-negotiation status
+ * @phydev: target phy_device struct
+ *
+ * Description: Return the auto-negotiation status from this @phydev
+ * Returns > 0 on success or < 0 on error. 0 means that auto-negotiation
+ * is still pending.
+ */
+static int phy_aneg_done(struct phy_device *phydev)
+{
+ struct phy_driver *drv = to_phy_driver(phydev->dev.driver);
+
+ return drv->aneg_done(phydev);
+}
+
int phy_update_status(struct phy_device *dev)
{
struct phy_driver *drv = to_phy_driver(dev->dev.driver);
@@ -477,25 +492,15 @@ int genphy_setup_forced(struct phy_device *phydev)
int phy_wait_aneg_done(struct phy_device *phydev)
{
uint64_t start = get_time_ns();
- int ctl;
if (phydev->autoneg == AUTONEG_DISABLE)
return 0;
while (!is_timeout(start, PHY_AN_TIMEOUT * SECOND)) {
- ctl = phy_read(phydev, MII_BMSR);
- if (ctl & BMSR_ANEGCOMPLETE) {
+ if (phy_aneg_done(phydev) > 0) {
phydev->link = 1;
return 0;
}
-
- /* Restart auto-negotiation if remote fault */
- if (ctl & BMSR_RFAULT) {
- puts("PHY remote fault detected\n"
- "PHY restarting auto-negotiation\n");
- phy_write(phydev, MII_BMCR,
- BMCR_ANENABLE | BMCR_ANRESTART);
- }
}
phydev->link = 0;
@@ -572,6 +577,33 @@ int genphy_config_aneg(struct phy_device *phydev)
}
/**
+ * genphy_aneg_done - return auto-negotiation status
+ * @phydev: target phy_device struct
+ *
+ * Description: Reads the status register and returns 0 either if
+ * auto-negotiation is incomplete, or if there was an error.
+ * Returns BMSR_ANEGCOMPLETE if auto-negotiation is done.
+ */
+int genphy_aneg_done(struct phy_device *phydev)
+{
+ int bmsr = phy_read(phydev, MII_BMSR);
+
+ if (bmsr < 0)
+ return bmsr;
+
+ /* Restart auto-negotiation if remote fault */
+ if (bmsr & BMSR_RFAULT) {
+ puts("PHY remote fault detected\n"
+ "PHY restarting auto-negotiation\n");
+ phy_write(phydev, MII_BMCR,
+ BMCR_ANENABLE | BMCR_ANRESTART);
+ }
+
+ return bmsr & BMSR_ANEGCOMPLETE;
+}
+EXPORT_SYMBOL(genphy_aneg_done);
+
+/**
* genphy_update_link - update link status in @phydev
* @phydev: target phy_device struct
*
@@ -825,6 +857,9 @@ int phy_driver_register(struct phy_driver *phydrv)
if (!phydrv->config_aneg)
phydrv->config_aneg = genphy_config_aneg;
+ if (!phydrv->aneg_done)
+ phydrv->aneg_done = genphy_aneg_done;
+
if (!phydrv->read_status)
phydrv->read_status = genphy_read_status;
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 7c5d754..c0fd4ff 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -234,6 +234,9 @@ struct phy_driver {
*/
int (*config_aneg)(struct phy_device *phydev);
+ /* Determines the auto negotiation result */
+ int (*aneg_done)(struct phy_device *phydev);
+
/* Determines the negotiated speed and duplex */
int (*read_status)(struct phy_device *phydev);
@@ -295,6 +298,7 @@ int phy_wait_aneg_done(struct phy_device *phydev);
/* Generic PHY support and helper functions */
int genphy_restart_aneg(struct phy_device *phydev);
int genphy_config_aneg(struct phy_device *phydev);
+int genphy_aneg_done(struct phy_device *phydev);
int genphy_update_link(struct phy_device *phydev);
int genphy_read_status(struct phy_device *phydev);
int genphy_config_advert(struct phy_device *phydev);
--
2.1.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2014-09-18 7:11 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-18 7:11 net: phy updates Sascha Hauer
2014-09-18 7:11 ` Sascha Hauer [this message]
2014-09-18 7:11 ` [PATCH 2/4] net: phy: Use xzalloc for small allocations Sascha Hauer
2014-09-18 7:11 ` [PATCH 3/4] net: phy: don't use 'dev' as name for variables of type struct phy_device Sascha Hauer
2014-09-18 7:11 ` [PATCH 4/4] net: phy: Use poller for periodic link check Sascha Hauer
2014-09-24 5:09 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1411024275-31766-2-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox