From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from ns.lynxeye.de ([87.118.118.114] helo=lynxeye.de) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1XXFuz-0007K4-FH for barebox@lists.infradead.org; Thu, 25 Sep 2014 20:45:37 +0000 Message-ID: <1411678267.2207.7.camel@tellur.intern.lynxeye.de> From: Lucas Stach Date: Thu, 25 Sep 2014 22:51:07 +0200 In-Reply-To: <4F988940-A208-4D81-95E0-BBD3FC3C48CF@kamama.com> References: <2F9C706F-8EBC-453B-8BA1-116680C7926A@kamama.com> <1411632866.2207.2.camel@tellur.intern.lynxeye.de> <4F988940-A208-4D81-95E0-BBD3FC3C48CF@kamama.com> Mime-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: nvidia jetson tk1 help To: Ryan Du Bois Cc: "barebox@lists.infradead.org" Am Donnerstag, den 25.09.2014, 10:55 -0700 schrieb Ryan Du Bois: > Okay, that worked, but I have to use the *-usbloader.img image. The emmc image doesn't output anything over UART. > > Is that expected? > That's expected. As said in the docs the images for Tegra are specific for the boot source. If you are starting with tegrarcm this would be the -usbloader boot source. If you want to persist barebox on the EMMC by copying the image to the boot0 partition you need to use the -emmc image, the -usbloader image won't come up there. If the doc isn't clear enough in that regard and you have suggestions on how to improve this: patches welcome. :) Regards, Lucas _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox