From: Lucas Stach <dev@lynxeye.de>
To: barebox@lists.infradead.org
Subject: [PATCH v2 19/19] ARM: tegra: enable network related options in defconfig
Date: Sat, 4 Oct 2014 19:40:25 +0200 [thread overview]
Message-ID: <1412444425-2569-20-git-send-email-dev@lynxeye.de> (raw)
In-Reply-To: <1412444425-2569-1-git-send-email-dev@lynxeye.de>
Now that we have working network support on the Beaver board
it makes sense to enable some network options.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
arch/arm/configs/tegra_v7_defconfig | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/configs/tegra_v7_defconfig b/arch/arm/configs/tegra_v7_defconfig
index 8f01b54..ead69ed 100644
--- a/arch/arm/configs/tegra_v7_defconfig
+++ b/arch/arm/configs/tegra_v7_defconfig
@@ -27,17 +27,24 @@ CONFIG_CMD_RESET=y
CONFIG_CMD_EXPORT=y
CONFIG_CMD_LOADENV=y
CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MIITOOL=y
+CONFIG_CMD_PING=y
CONFIG_CMD_EDIT=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_CLK=y
CONFIG_CMD_DETECT=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_OFTREE=y
+CONFIG_NET=y
CONFIG_DRIVER_SERIAL_NS16550=y
+CONFIG_DRIVER_NET_RTL8169=y
CONFIG_MCI=y
CONFIG_MCI_MMC_BOOT_PARTITIONS=y
CONFIG_MCI_TEGRA=y
CONFIG_PCI_TEGRA=y
CONFIG_FS_EXT4=y
+CONFIG_FS_TFTP=y
+CONFIG_FS_NFS=y
CONFIG_FS_FAT=y
CONFIG_FS_FAT_LFN=y
--
1.9.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2014-10-04 17:36 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-04 17:40 [PATCH v2 00/19] PCI and Tegra series revamp Lucas Stach
2014-10-04 17:40 ` [PATCH v2 01/19] MIPS: malta: fix pci IO resource assignment Lucas Stach
2014-10-04 17:40 ` [PATCH v2 02/19] pci: split out device init Lucas Stach
2014-10-04 17:40 ` [PATCH v2 03/19] pci: add resource enum Lucas Stach
2014-10-04 17:40 ` [PATCH v2 04/19] pci: properly populate prefetchable BARs Lucas Stach
2014-10-04 17:40 ` [PATCH v2 05/19] pci: setup bridges and traverse buses behind them Lucas Stach
2014-10-04 17:40 ` [PATCH v2 06/19] pci: defer device registration until after bridge setup Lucas Stach
2014-10-04 17:40 ` [PATCH v2 07/19] pci: prettyprint device names Lucas Stach
2014-10-04 17:40 ` [PATCH v2 08/19] pci: track parent<->child relationship Lucas Stach
2014-10-04 17:40 ` [PATCH v2 09/19] commands: lspci: go down into subordinate busses Lucas Stach
2014-10-04 17:40 ` [PATCH v2 10/19] clk: tegra: add PLLE setup functions Lucas Stach
2014-10-04 17:40 ` [PATCH v2 11/19] clk: tegra30: add PCIe clocks Lucas Stach
2014-10-04 17:40 ` [PATCH v2 12/19] i2c: tegra: move to fs initcall Lucas Stach
2014-10-04 17:40 ` [PATCH v2 13/19] ARM: tegra: beaver: enable PEX voltage rail Lucas Stach
2014-10-04 17:40 ` [PATCH v2 14/19] tegra: pmc: add powerdomain handling Lucas Stach
2014-10-04 17:40 ` [PATCH v2 15/19] of: import pci range parser from linux Lucas Stach
2014-10-04 17:40 ` [PATCH v2 16/19] pci: add Tegra host controller driver Lucas Stach
2014-10-04 17:40 ` [PATCH v2 17/19] ARM: tegra: advertise PCI support Lucas Stach
2014-10-04 17:40 ` [PATCH v2 18/19] net: add rtl8169 driver Lucas Stach
2014-10-04 17:40 ` Lucas Stach [this message]
2014-10-08 6:39 ` [PATCH v2 00/19] PCI and Tegra series revamp Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1412444425-2569-20-git-send-email-dev@lynxeye.de \
--to=dev@lynxeye.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox