From: Juergen Borleis <jbe@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 04/19] arch/MPC5xxx: Simplify the calculation
Date: Tue, 7 Oct 2014 16:22:03 +0200 [thread overview]
Message-ID: <1412691738-11145-5-git-send-email-jbe@pengutronix.de> (raw)
In-Reply-To: <1412691738-11145-1-git-send-email-jbe@pengutronix.de>
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
arch/ppc/mach-mpc5xxx/start.S | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/ppc/mach-mpc5xxx/start.S b/arch/ppc/mach-mpc5xxx/start.S
index 291f625..6a32718 100644
--- a/arch/ppc/mach-mpc5xxx/start.S
+++ b/arch/ppc/mach-mpc5xxx/start.S
@@ -66,6 +66,7 @@
* Second stage loader entry. When entered here we assume that spr 311
* is set to the current MBAR address.
*/
+_base:
mfspr r4, MBAR
b setup_mbar
. = EXC_OFF_SYS_RESET
@@ -251,9 +252,8 @@ _continue_init:
bl calc_source /* Calculate Source Address */
calc_source:
- mfspr r4, LR
- subi r4, r4, (calc_source - _start)
- subi r4, r4, 0x100
+ mflr r4
+ subi r4, r4, (calc_source - _base)
lis r5, __init_size@h /* Size */
ori r5, r5, __init_size@l
--
2.1.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2014-10-07 14:22 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-07 14:21 [RFC] Add PowerPC MPC5125 support Juergen Borleis
2014-10-07 14:22 ` [PATCH 01/19] arch/MPC5xxx: fix linker script for MPC5200 Juergen Borleis
2014-10-07 14:22 ` [PATCH 02/19] arch/MPC5xxx: use a mach specific linker script instead of a board specific one Juergen Borleis
2014-10-07 14:22 ` [PATCH 03/19] arch/MPC5xxx: replace 'depends on' by 'select' Juergen Borleis
2014-10-07 14:22 ` Juergen Borleis [this message]
2014-10-07 14:22 ` [PATCH 05/19] arch/MPC5xxx: just a format clean up Juergen Borleis
2014-10-07 14:22 ` [PATCH 06/19] arch/MPC5xxx: move away existing files to be able to add a new SoC type Juergen Borleis
2014-10-07 14:22 ` [PATCH 07/19] arch/MPC5xxx: separate architecture's main SoC header file Juergen Borleis
2014-10-07 14:22 ` [PATCH 08/19] arch/MPC5xxx: separate clock functions Juergen Borleis
2014-10-07 14:22 ` [PATCH 09/19] arch/MPC5xxx: just use macros instead of anonymous digits Juergen Borleis
2014-10-07 14:22 ` [PATCH 10/19] MPC5xxx/serial: use dedicated I/O functions instead of memory access Juergen Borleis
2014-10-07 14:22 ` [PATCH 11/19] MPC5xxx/serial: provide an easier way to share register description Juergen Borleis
2014-10-07 14:22 ` [PATCH 12/19] MPC5xxx/serial: use new shared " Juergen Borleis
2014-10-07 14:22 ` [PATCH 13/19] MPC5xxx/serial: re-factor the code to share it between MPC5200/MPC5125 Juergen Borleis
2014-10-07 14:22 ` [PATCH 14/19] arch/MPC5xxx: add MPC5125 SoC support Juergen Borleis
2014-10-07 14:22 ` [PATCH 15/19] arch/MPC5xxx: add MPC5125 to the build-system Juergen Borleis
2014-10-07 14:22 ` [PATCH 16/19] MPC5xxx/serial: add support for the MPC5125 SoC Juergen Borleis
2014-10-07 14:22 ` [PATCH 17/19] MPC5125/FEC: add another FEC driver " Juergen Borleis
2014-10-07 14:22 ` [PATCH 18/19] MPC5125/WDG: add a watchdog driver Juergen Borleis
2014-10-07 14:22 ` [PATCH 19/19] MPC5125/GPIO: add a generic GPIO driver Juergen Borleis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1412691738-11145-5-git-send-email-jbe@pengutronix.de \
--to=jbe@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox