From: Antony Pavlov <antonynpavlov@gmail.com>
To: barebox@lists.infradead.org
Subject: [PATCH] pci: split out device init
Date: Tue, 7 Oct 2014 19:42:06 +0400 [thread overview]
Message-ID: <1412696527-3981-2-git-send-email-antonynpavlov@gmail.com> (raw)
In-Reply-To: <1412696527-3981-1-git-send-email-antonynpavlov@gmail.com>
From: Lucas Stach <dev@lynxeye.de>
To make it reusable and the code more readable.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
drivers/pci/pci.c | 137 +++++++++++++++++++++++++++++-------------------------
1 file changed, 74 insertions(+), 63 deletions(-)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index a1b7680..ef998dc 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -12,6 +12,8 @@ static struct pci_controller *hose_head, **hose_tail = &hose_head;
LIST_HEAD(pci_root_buses);
EXPORT_SYMBOL(pci_root_buses);
static u8 bus_index;
+static resource_size_t last_mem;
+static resource_size_t last_io;
static struct pci_bus *pci_alloc_bus(void)
{
@@ -45,6 +47,10 @@ void register_pci_controller(struct pci_controller *hose)
if (hose->set_busno)
hose->set_busno(hose, bus->number);
+
+ last_mem = bus->resource[0]->start;
+ last_io = bus->resource[1]->start;
+
pci_scan_bus(bus);
list_add_tail(&bus->node, &pci_root_buses);
@@ -111,27 +117,80 @@ static struct pci_dev *alloc_pci_dev(void)
return dev;
}
+static void setup_device(struct pci_dev *dev, int max_bar)
+{
+ int bar, size;
+ u32 mask;
+ u8 cmd;
+
+ pci_read_config_byte(dev, PCI_COMMAND, &cmd);
+ pci_write_config_byte(dev, PCI_COMMAND,
+ cmd & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY));
+
+ for (bar = 0; bar < max_bar; bar++) {
+ resource_size_t last_addr;
+
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, 0xfffffffe);
+ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, &mask);
+
+ if (mask == 0 || mask == 0xffffffff) {
+ DBG(" PCI: pbar%d set bad mask\n", bar);
+ continue;
+ }
+
+ if (mask & 0x01) { /* IO */
+ size = -(mask & 0xfffffffe);
+ DBG(" PCI: pbar%d: mask=%08x io %d bytes\n", bar, mask, size);
+ if (last_mem + size > dev->bus->resource[0]->end) {
+ DBG("BAR does not fit within bus IO res\n");
+ return;
+ }
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, last_io);
+ dev->resource[bar].flags = IORESOURCE_IO;
+ last_addr = last_io;
+ last_io += size;
+ } else { /* MEM */
+ size = -(mask & 0xfffffff0);
+ DBG(" PCI: pbar%d: mask=%08x memory %d bytes\n", bar, mask, size);
+ if (last_mem + size > dev->bus->resource[0]->end) {
+ DBG("BAR does not fit within bus mem res\n");
+ return;
+ }
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, last_mem);
+ dev->resource[bar].flags = IORESOURCE_MEM;
+ last_addr = last_mem;
+ last_mem += size;
+
+ if ((mask & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
+ PCI_BASE_ADDRESS_MEM_TYPE_64) {
+ dev->resource[bar].flags |= IORESOURCE_MEM_64;
+ pci_write_config_dword(dev,
+ PCI_BASE_ADDRESS_1 + bar * 4, 0);
+ }
+ }
+
+ dev->resource[bar].start = last_addr;
+ dev->resource[bar].end = last_addr + size - 1;
+ if (dev->resource[bar].flags & IORESOURCE_MEM_64)
+ bar++;
+ }
+
+ pci_write_config_byte(dev, PCI_COMMAND, cmd);
+ list_add_tail(&dev->bus_list, &dev->bus->devices);
+ pci_register_device(dev);
+}
+
unsigned int pci_scan_bus(struct pci_bus *bus)
{
+ struct pci_dev *dev;
unsigned int devfn, l, max, class;
unsigned char cmd, tmp, hdr_type, is_multi = 0;
- struct pci_dev *dev;
- resource_size_t last_mem;
- resource_size_t last_io;
-
- /* FIXME: use res_start() */
- last_mem = bus->resource[0]->start;
- last_io = bus->resource[1]->start;
DBG("pci_scan_bus for bus %d\n", bus->number);
DBG(" last_io = 0x%08x, last_mem = 0x%08x\n", last_io, last_mem);
max = bus->secondary;
for (devfn = 0; devfn < 0xff; ++devfn) {
- int bar;
- u32 old_bar, mask;
- int size;
-
if (PCI_FUNC(devfn) && !is_multi) {
/* not a multi-function device */
continue;
@@ -169,6 +228,8 @@ unsigned int pci_scan_bus(struct pci_bus *bus)
dev->hdr_type = hdr_type;
DBG("PCI: class = %08x, hdr_type = %08x\n", class, hdr_type);
+ DBG("PCI: %02x:%02x [%04x:%04x]\n", bus->number, dev->devfn,
+ dev->vendor, dev->device);
switch (hdr_type & 0x7f) { /* header type */
case PCI_HEADER_TYPE_NORMAL: /* standard header */
@@ -181,6 +242,8 @@ unsigned int pci_scan_bus(struct pci_bus *bus)
*/
pci_read_config_dword(dev, PCI_ROM_ADDRESS, &l);
dev->rom_address = (l == 0xffffffff) ? 0 : l;
+
+ setup_device(dev, 6);
break;
default: /* unknown header */
bad:
@@ -189,62 +252,10 @@ unsigned int pci_scan_bus(struct pci_bus *bus)
continue;
}
- DBG("PCI: %02x:%02x [%04x/%04x]\n", bus->number, dev->devfn, dev->vendor, dev->device);
-
if (class == PCI_CLASS_BRIDGE_HOST) {
DBG("PCI: skip pci host bridge\n");
continue;
}
-
- pci_read_config_byte(dev, PCI_COMMAND, &cmd);
- pci_write_config_byte(dev, PCI_COMMAND,
- cmd & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY));
-
- for (bar = 0; bar < 6; bar++) {
- resource_size_t last_addr;
-
- pci_read_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, &old_bar);
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, 0xfffffffe);
- pci_read_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, &mask);
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, old_bar);
-
- if (mask == 0 || mask == 0xffffffff) {
- DBG(" PCI: pbar%d set bad mask\n", bar);
- continue;
- }
-
- if (mask & 0x01) { /* IO */
- size = -(mask & 0xfffffffe);
- DBG(" PCI: pbar%d: mask=%08x io %d bytes\n", bar, mask, size);
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, last_io);
- dev->resource[bar].flags = IORESOURCE_IO;
- last_addr = last_io;
- last_io += size;
- } else { /* MEM */
- size = -(mask & 0xfffffff0);
- DBG(" PCI: pbar%d: mask=%08x memory %d bytes\n", bar, mask, size);
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, last_mem);
- dev->resource[bar].flags = IORESOURCE_MEM;
- last_addr = last_mem;
- last_mem += size;
-
- if ((mask & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
- PCI_BASE_ADDRESS_MEM_TYPE_64) {
- dev->resource[bar].flags |= IORESOURCE_MEM_64;
- pci_write_config_dword(dev,
- PCI_BASE_ADDRESS_1 + bar * 4, 0);
- }
- }
-
- dev->resource[bar].start = last_addr;
- dev->resource[bar].end = last_addr + size - 1;
- if (dev->resource[bar].flags & IORESOURCE_MEM_64)
- bar++;
- }
-
- pci_write_config_byte(dev, PCI_COMMAND, cmd);
- list_add_tail(&dev->bus_list, &bus->devices);
- pci_register_device(dev);
}
/*
--
2.1.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2014-10-07 15:42 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-07 15:42 [PATCH] clock.c: fix whitespaces Antony Pavlov
2014-10-07 15:42 ` Antony Pavlov [this message]
2014-10-07 15:45 ` [PATCH] pci: split out device init Antony Pavlov
2014-10-07 15:42 ` [PATCH] clock.c: fix whitespaces Antony Pavlov
2014-10-08 9:13 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1412696527-3981-2-git-send-email-antonynpavlov@gmail.com \
--to=antonynpavlov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox