[PATCH 5/6] ARM: dts: split phyCORE-AM335x device tree

["Teresa Gámez" <t.gamez@phytec.de>]

To support different module variants, split the phyCORE dts
in dts and dtsi. Configurable parts which are supported by
barebox are spi nor flash and i2c eeprom.

Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
---
 arch/arm/boards/phytec-phycore-am335x/board.c    |   4 +-
 arch/arm/boards/phytec-phycore-am335x/lowlevel.c |   6 +-
 arch/arm/dts/Makefile                            |   2 +-
 arch/arm/dts/am335x-phytec-phycore-som.dts       |  24 ++
 arch/arm/dts/am335x-phytec-phycore-som.dtsi      | 286 ++++++++++++++++++++++
 arch/arm/dts/am335x-phytec-phycore.dts           | 292 -----------------------
 6 files changed, 316 insertions(+), 298 deletions(-)
 create mode 100644 arch/arm/dts/am335x-phytec-phycore-som.dts
 create mode 100644 arch/arm/dts/am335x-phytec-phycore-som.dtsi
 delete mode 100644 arch/arm/dts/am335x-phytec-phycore.dts

diff --git a/arch/arm/boards/phytec-phycore-am335x/board.c b/arch/arm/boards/phytec-phycore-am335x/board.c
index 035866b..64e3904 100644
--- a/arch/arm/boards/phytec-phycore-am335x/board.c
+++ b/arch/arm/boards/phytec-phycore-am335x/board.c
@@ -34,7 +34,7 @@
 
 static int pcm051_coredevice_init(void)
 {
-	if (!of_machine_is_compatible("phytec,pcm051"))
+	if (!of_machine_is_compatible("phytec,phycore-am335x-som"))
 		return 0;
 
 	am33xx_register_ethaddr(0, 0);
@@ -58,7 +58,7 @@ static char *xloadslots[] = {
 
 static int pcm051_devices_init(void)
 {
-	if (!of_machine_is_compatible("phytec,pcm051"))
+	if (!of_machine_is_compatible("phytec,phycore-am335x-som"))
 		return 0;
 
 	switch (bootsource_get()) {
diff --git a/arch/arm/boards/phytec-phycore-am335x/lowlevel.c b/arch/arm/boards/phytec-phycore-am335x/lowlevel.c
index 66bae80..47902d0 100644
--- a/arch/arm/boards/phytec-phycore-am335x/lowlevel.c
+++ b/arch/arm/boards/phytec-phycore-am335x/lowlevel.c
@@ -117,7 +117,7 @@ struct pcm051_sdram_timings timings[] = {
 	},
 };
 
-extern char __dtb_am335x_phytec_phycore_start[];
+extern char __dtb_am335x_phytec_phycore_som_start[];
 
 /**
  * @brief The basic entry point for board initialization.
@@ -153,7 +153,7 @@ static noinline void pcm051_board_init(int sdram)
 	omap_uart_lowlevel_init((void *)AM33XX_UART0_BASE);
 	putc_ll('>');
 
-	fdt = __dtb_am335x_phytec_phycore_start - get_runtime_offset();
+	fdt = __dtb_am335x_phytec_phycore_som_start - get_runtime_offset();
 
 	am335x_barebox_entry(fdt);
 }
@@ -198,7 +198,7 @@ ENTRY_FUNCTION(start_am33xx_phytec_phycore_sdram, r0, r1, r2)
 {
 	void *fdt;
 
-	fdt = __dtb_am335x_phytec_phycore_start - get_runtime_offset();
+	fdt = __dtb_am335x_phytec_phycore_som_start - get_runtime_offset();
 
 	am335x_barebox_entry(fdt);
 }
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 3fcd5f1..65ed022 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -26,7 +26,7 @@ pbl-dtb-$(CONFIG_MACH_NVIDIA_JETSON) += tegra124-jetson-tk1.dtb.o
 pbl-dtb-$(CONFIG_MACH_PCA100) += imx27-phytec-phycard-s-rdk-bb.dtb.o
 pbl-dtb-$(CONFIG_MACH_PCAAXL3) += imx6q-phytec-pbaa03.dtb.o
 pbl-dtb-$(CONFIG_MACH_PCM038) += imx27-phytec-phycore-rdk.dtb.o
-pbl-dtb-$(CONFIG_MACH_PCM051) += am335x-phytec-phycore.dtb.o
+pbl-dtb-$(CONFIG_MACH_PCM051) += am335x-phytec-phycore-som.dtb.o
 pbl-dtb-$(CONFIG_MACH_PHYTEC_PFLA02) += imx6s-phytec-pbab01.dtb.o imx6dl-phytec-pbab01.dtb.o imx6q-phytec-pbab01.dtb.o
 pbl-dtb-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_AX3) += armada-xp-openblocks-ax3-4-bb.dtb.o
 pbl-dtb-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_A6) += kirkwood-openblocks_a6-bb.dtb.o
diff --git a/arch/arm/dts/am335x-phytec-phycore-som.dts b/arch/arm/dts/am335x-phytec-phycore-som.dts
new file mode 100644
index 0000000..93f09e2
--- /dev/null
+++ b/arch/arm/dts/am335x-phytec-phycore-som.dts
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2014 Teresa Gámez <t.gamez@phytec.de> Phytec Messtechnik GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-phytec-phycore-som.dtsi"
+
+/ {
+	model = "Phytec phyCORE AM335x";
+	compatible = "phytec,phycore-am335x-som", "ti,am33xx";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&eeprom {
+	status = "okay";
+};
diff --git a/arch/arm/dts/am335x-phytec-phycore-som.dtsi b/arch/arm/dts/am335x-phytec-phycore-som.dtsi
new file mode 100644
index 0000000..f1bcb8b
--- /dev/null
+++ b/arch/arm/dts/am335x-phytec-phycore-som.dtsi
@@ -0,0 +1,286 @@
+/ {
+	chosen {
+		linux,stdout-path = &uart0;
+
+		environment-spi {
+			compatible = "barebox,environment";
+			device-path = &flash, "partname:bareboxenv";
+			status = "disabled";
+		};
+
+		environment-nand {
+			compatible = "barebox,environment";
+			device-path = &nand, "partname:bareboxenv";
+			status = "disabled";
+		};
+	};
+};
+
+&am33xx_pinmux {
+	i2c0_pins: pinmux_i2c0_pins {
+			pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	spi0_pins: pinmux_spi0_pins {
+		pinctrl-single,pins = <
+			0x150 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* spi0_clk.spi0_clk */
+			0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* spi0_d0.spi0_d0 */
+			0x158 (PIN_INPUT_PULLUP | MUX_MODE0)	/* spi0_d1.spi0_d1 */
+			0x15c (PIN_INPUT_PULLUP | MUX_MODE0)	/* spi0_cs0.spi0_cs0 */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)    /* uart0_rxd.uart0_rxd */
+			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0xf0 (MUX_MODE0 | INPUT_EN | PULL_UP)	/* mmc0_dat3.mmc0_dat3 */
+			0xf4 (MUX_MODE0 | INPUT_EN | PULL_UP)	/* mmc0_dat2.mmc0_dat2 */
+			0xf8 (MUX_MODE0 | INPUT_EN | PULL_UP)	/* mmc0_dat1.mmc0_dat1 */
+			0xfc (MUX_MODE0 | INPUT_EN | PULL_UP)	/* mmc0_dat0.mmc0_dat0 */
+			0x100 (MUX_MODE0 | INPUT_EN | PULL_UP)	/* mmc0_clk.mmc0_clk */
+			0x104 (MUX_MODE0 | INPUT_EN | PULL_UP)	/* mmc0_cmd.mmc0_cmd */
+		>;
+	};
+
+	emac_rmii1_pins: pinmux_emac_rmii1_pins {
+		pinctrl-single,pins = <
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs_dv */
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
+			0x114 (PIN_OUTPUT | MUX_MODE1)		/* mii1_txen.rmii1_txen */
+			0x124 (PIN_OUTPUT | MUX_MODE1)		/* mii1_txd1.rmii1_txd1 */
+			0x128 (PIN_OUTPUT | MUX_MODE1)		/* mii1_txd0.rmii1_txd0 */
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk.rmii1_refclk */
+		>;
+	};
+
+	nandflash_pins_s0: nandflash_pins_s0 {
+		pinctrl-single,pins = <
+			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
+			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	pcm051_led_pins: pinmux_pcm051_led_pins {
+		pinctrl-single,pins = <
+			0x80 (MUX_MODE7)
+			0x84 (MUX_MODE7)
+		>;
+	};
+
+	pcm051_user_pins: pinmux_pcm051_user_pins {
+		pinctrl-single,pins = <
+			0x1e4 (PULL_UP |INPUT_EN |MUX_MODE7)
+			0x1e8 (PULL_UP |INPUT_EN |MUX_MODE7)
+		>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom: 24c32@52 {
+		status = "disabled";
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x52>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "disabled";
+
+	flash: m25p80 {
+		compatible = "m25p80";
+		spi-max-frequency = <48000000>;
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "xload";
+			reg = <0x0 0x20000>;
+		};
+
+		partition@1 {
+			label = "barebox";
+			reg = <0x20000 0x80000>;
+		};
+
+		partition@2 {
+			label = "bareboxenv";
+			reg = <0xa0000 0x20000>;
+		};
+
+		partition@3 {
+			label = "oftree";
+			reg = <0xc0000 0x20000>;
+		};
+
+		partition@4 {
+			label = "kernel";
+			reg = <0xe0000 0x400000>;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&davinci_mdio_default>;
+	status = "okay";
+};
+
+&phy_sel {
+	rmii-clock-ext;
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "rmii";
+};
+
+&mac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rmii1_pins>;
+	slaves = <1>;
+	status = "okay";
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins_s0>;
+	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
+	nand: nand@0,0 {
+		reg = <0 0 0>; /* CS0, offset 0 */
+		nand-bus-width = <8>;
+		ti,nand-ecc-opt = "bch8";
+		gpmc,device-nand = "true";
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <30>;
+		gpmc,cs-wr-off-ns = <30>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <30>;
+		gpmc,adv-wr-off-ns = <30>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <20>;
+		gpmc,oe-on-ns = <10>;
+		gpmc,oe-off-ns = <30>;
+		gpmc,access-ns = <30>;
+		gpmc,rd-cycle-ns = <30>;
+		gpmc,wr-cycle-ns = <30>;
+		gpmc,wait-pin = <1>;
+		gpmc,wait-on-read = "true";
+		gpmc,wait-on-write = "true";
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <50>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-access-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		elm_id = <&elm>;
+
+		partition@0 {
+			label = "xload";
+			reg = <0x0 0x20000>;
+		};
+
+		partition@1 {
+			label = "xload_backup1";
+			reg = <0x20000 0x20000>;
+		};
+
+		partition@2 {
+			label = "xload_backup2";
+			reg = <0x40000 0x20000>;
+		};
+
+		partition@3 {
+			label = "xload_backup3";
+			reg = <0x60000 0x20000>;
+		};
+
+		partition@4 {
+			label = "barebox";
+			reg = <0x80000 0x80000>;
+		};
+
+		partition@5 {
+			label = "bareboxenv";
+			reg = <0x100000 0x20000>;
+		};
+
+		partition@6 {
+			label = "oftree";
+			reg = <0x120000 0x20000>;
+		};
+
+		partition@7 {
+			label = "kernel";
+			reg = <0x140000 0x800000>;
+		};
+
+		partition@8 {
+			label = "root";
+			/*
+			 * Size 0x0 extends partition to
+			 * end of nand flash.
+			 */
+			reg = <0x940000 0x0>;
+		};
+	};
+};
diff --git a/arch/arm/dts/am335x-phytec-phycore.dts b/arch/arm/dts/am335x-phytec-phycore.dts
deleted file mode 100644
index 1a1352f..0000000
--- a/arch/arm/dts/am335x-phytec-phycore.dts
+++ /dev/null
@@ -1,292 +0,0 @@
-/dts-v1/;
-
-#include "am33xx.dtsi"
-
-/ {
-	model = "Phytec phyCORE AM335x";
-	compatible = "phytec,phycore-am335x", "phytec,pcm051", "ti,am33xx";
-
-	chosen {
-		linux,stdout-path = &uart0;
-
-		environment-spi {
-			compatible = "barebox,environment";
-			device-path = &flash, "partname:bareboxenv";
-			status = "disabled";
-		};
-
-		environment-nand {
-			compatible = "barebox,environment";
-			device-path = &nand, "partname:bareboxenv";
-			status = "disabled";
-		};
-	};
-};
-
-&am33xx_pinmux {
-	i2c0_pins: pinmux_i2c0_pins {
-			pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	spi0_pins: pinmux_spi0_pins {
-		pinctrl-single,pins = <
-			0x150 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* spi0_clk.spi0_clk */
-			0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* spi0_d0.spi0_d0 */
-			0x158 (PIN_INPUT_PULLUP | MUX_MODE0)	/* spi0_d1.spi0_d1 */
-			0x15c (PIN_INPUT_PULLUP | MUX_MODE0)	/* spi0_cs0.spi0_cs0 */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)    /* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			0xf0 (MUX_MODE0 | INPUT_EN | PULL_UP)	/* mmc0_dat3.mmc0_dat3 */
-			0xf4 (MUX_MODE0 | INPUT_EN | PULL_UP)	/* mmc0_dat2.mmc0_dat2 */
-			0xf8 (MUX_MODE0 | INPUT_EN | PULL_UP)	/* mmc0_dat1.mmc0_dat1 */
-			0xfc (MUX_MODE0 | INPUT_EN | PULL_UP)	/* mmc0_dat0.mmc0_dat0 */
-			0x100 (MUX_MODE0 | INPUT_EN | PULL_UP)	/* mmc0_clk.mmc0_clk */
-			0x104 (MUX_MODE0 | INPUT_EN | PULL_UP)	/* mmc0_cmd.mmc0_cmd */
-		>;
-	};
-
-	emac_rmii1_pins: pinmux_emac_rmii1_pins {
-		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs_dv */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
-			0x114 (PIN_OUTPUT | MUX_MODE1)		/* mii1_txen.rmii1_txen */
-			0x124 (PIN_OUTPUT | MUX_MODE1)		/* mii1_txd1.rmii1_txd1 */
-			0x128 (PIN_OUTPUT | MUX_MODE1)		/* mii1_txd0.rmii1_txd0 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk.rmii1_refclk */
-		>;
-	};
-
-	nandflash_pins_s0: nandflash_pins_s0 {
-		pinctrl-single,pins = <
-			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	pcm051_led_pins: pinmux_pcm051_led_pins {
-		pinctrl-single,pins = <
-			0x80 (MUX_MODE7)
-			0x84 (MUX_MODE7)
-		>;
-	};
-
-	pcm051_user_pins: pinmux_pcm051_user_pins {
-		pinctrl-single,pins = <
-			0x1e4 (PULL_UP |INPUT_EN |MUX_MODE7)
-			0x1e8 (PULL_UP |INPUT_EN |MUX_MODE7)
-		>;
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	eeprom: 24c32@52 {
-		compatible = "atmel,24c32";
-		pagesize = <32>;
-		reg = <0x52>;
-	};
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	status = "okay";
-};
-
-&spi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins>;
-	status = "okay";
-
-	flash: m25p80 {
-		compatible = "m25p80";
-		spi-max-frequency = <48000000>;
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "xload";
-			reg = <0x0 0x20000>;
-		};
-
-		partition@1 {
-			label = "barebox";
-			reg = <0x20000 0x80000>;
-		};
-
-		partition@2 {
-			label = "bareboxenv";
-			reg = <0xa0000 0x20000>;
-		};
-
-		partition@3 {
-			label = "oftree";
-			reg = <0xc0000 0x20000>;
-		};
-
-		partition@4 {
-			label = "kernel";
-			reg = <0xe0000 0x400000>;
-		};
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&davinci_mdio_default>;
-	status = "okay";
-};
-
-&phy_sel {
-	rmii-clock-ext;
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rmii";
-};
-
-&mac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_rmii1_pins>;
-	slaves = <1>;
-	status = "okay";
-};
-
-&gpmc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nandflash_pins_s0>;
-	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
-	nand: nand@0,0 {
-		reg = <0 0 0>; /* CS0, offset 0 */
-		nand-bus-width = <8>;
-		ti,nand-ecc-opt = "bch8";
-		gpmc,device-nand = "true";
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <30>;
-		gpmc,cs-wr-off-ns = <30>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <30>;
-		gpmc,adv-wr-off-ns = <30>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <20>;
-		gpmc,oe-on-ns = <10>;
-		gpmc,oe-off-ns = <30>;
-		gpmc,access-ns = <30>;
-		gpmc,rd-cycle-ns = <30>;
-		gpmc,wr-cycle-ns = <30>;
-		gpmc,wait-pin = <1>;
-		gpmc,wait-on-read = "true";
-		gpmc,wait-on-write = "true";
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <50>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,wr-access-ns = <0>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		elm_id = <&elm>;
-
-		partition@0 {
-			label = "xload";
-			reg = <0x0 0x20000>;
-		};
-
-		partition@1 {
-			label = "xload_backup1";
-			reg = <0x20000 0x20000>;
-		};
-
-		partition@2 {
-			label = "xload_backup2";
-			reg = <0x40000 0x20000>;
-		};
-
-		partition@3 {
-			label = "xload_backup3";
-			reg = <0x60000 0x20000>;
-		};
-
-		partition@4 {
-			label = "barebox";
-			reg = <0x80000 0x80000>;
-		};
-
-		partition@5 {
-			label = "bareboxenv";
-			reg = <0x100000 0x20000>;
-		};
-
-		partition@6 {
-			label = "oftree";
-			reg = <0x120000 0x20000>;
-		};
-
-		partition@7 {
-			label = "kernel";
-			reg = <0x140000 0x800000>;
-		};
-
-		partition@8 {
-			label = "root";
-			/*
-			 * Size 0x0 extends partition to
-			 * end of nand flash.
-			 */
-			reg = <0x940000 0x0>;
-		};
-	};
-};
-- 
1.9.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox