[PATCH 2/2] net: cpsw: Set phy device_node pointer in probe

[Wadim Egorov <w.egorov@phytec.de>]

Set the phy device_node pointer to the equivalent cpsw slave node.
We need this, because phy drivers using this pointer for their configuration.

Create and register the phy device in cpsw_probe(), so that this phy device
can be found later by phy_device_connect() in cpsw_open().

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
---
 drivers/net/cpsw.c |   13 +++++++++++++
 1 files changed, 13 insertions(+), 0 deletions(-)

diff --git a/drivers/net/cpsw.c b/drivers/net/cpsw.c
index 167b2dd..a0621f5 100644
--- a/drivers/net/cpsw.c
+++ b/drivers/net/cpsw.c
@@ -1200,6 +1200,19 @@ int cpsw_probe(struct device_d *dev)
 	mdiobus_register(&priv->miibus);
 
 	for (i = 0; i < priv->num_slaves; i++) {
+		struct phy_device *phy;
+
+		phy = mdiobus_scan(&priv->miibus, priv->slaves[i].phy_id);
+		if (IS_ERR(phy)) {
+			ret = PTR_ERR(phy);
+			goto out;
+		}
+
+		phy->dev.device_node = priv->slaves[i].dev.device_node;
+		ret = phy_register_device(phy);
+		if (ret)
+			goto out;
+
 		ret = cpsw_slave_setup(&priv->slaves[i], i, priv);
 		if (ret)
 			goto out;
-- 
1.7.0.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox