From: Lucas Stach <dev@lynxeye.de>
To: barebox@lists.infradead.org
Subject: [PATCH 00/13] Tegra124 PCIe
Date: Sun, 2 Nov 2014 21:13:42 +0100 [thread overview]
Message-ID: <1414959235-18095-1-git-send-email-dev@lynxeye.de> (raw)
This series implements PCIe on Tegra124 aka K1. With
this applied the Jetson-TK1 platform is finally useable
for proper development, as the network is working now.
The series is spun against -next, as it depends on the
previous Tegra PCIe work found there. I hope Sascha can
still squeeze this in before the next release.
Lucas Stach (13):
net: rtl8169: add support for RTL-8168/8111g
net: rtl8169: clean receive buffer after net handler
tegra: defconfig: enable barebox OF drivers
pinctrl: tegra: try to select "boot" state
arm: dts: jetson-tk1: switch to upstream DT
clk: tegra: slow down MSELECT to 102MHz
tegra: pmc: work around power domain failure
tegra: jetson-tk1: enable 1.05V_RUN
clk: tegra124: add PLLE setup functions
clk: tegra124: add PCIe clocks
add generic PHY framework
pinctrl: tegra: add XUSB pad controller
pci: tegra: add tegra124 support
arch/arm/boards/nvidia-jetson-tk1/Makefile | 2 +-
arch/arm/boards/nvidia-jetson-tk1/board.c | 50 +
arch/arm/configs/tegra_v7_defconfig | 1 +
arch/arm/dts/tegra124-jetson-tk1.dts | 1823 +---------------------------
arch/arm/mach-tegra/tegra20-pmc.c | 2 +
drivers/Kconfig | 1 +
drivers/Makefile | 1 +
drivers/clk/tegra/clk-pll.c | 173 ++-
drivers/clk/tegra/clk-tegra124.c | 37 +-
drivers/clk/tegra/clk-tegra30.c | 2 +-
drivers/clk/tegra/clk.h | 7 +
drivers/net/rtl8169.c | 12 +
drivers/pci/pci-tegra.c | 156 ++-
drivers/phy/Kconfig | 18 +
drivers/phy/Makefile | 5 +
drivers/phy/phy-core.c | 318 +++++
drivers/pinctrl/Kconfig | 8 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-tegra-xusb.c | 519 ++++++++
drivers/pinctrl/pinctrl-tegra20.c | 8 +-
drivers/pinctrl/pinctrl-tegra30.c | 8 +-
include/linux/phy/phy.h | 240 ++++
22 files changed, 1538 insertions(+), 1854 deletions(-)
create mode 100644 arch/arm/boards/nvidia-jetson-tk1/board.c
create mode 100644 drivers/phy/Kconfig
create mode 100644 drivers/phy/Makefile
create mode 100644 drivers/phy/phy-core.c
create mode 100644 drivers/pinctrl/pinctrl-tegra-xusb.c
create mode 100644 include/linux/phy/phy.h
--
1.9.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2014-11-02 20:07 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-02 20:13 Lucas Stach [this message]
2014-11-02 20:13 ` [PATCH 01/13] net: rtl8169: add support for RTL-8168/8111g Lucas Stach
2014-11-02 20:13 ` [PATCH 02/13] net: rtl8169: clean receive buffer after net handler Lucas Stach
2014-11-02 20:13 ` [PATCH 03/13] tegra: defconfig: enable barebox OF drivers Lucas Stach
2014-11-02 20:13 ` [PATCH 04/13] pinctrl: tegra: try to select "boot" state Lucas Stach
2014-11-02 20:13 ` [PATCH 05/13] arm: dts: jetson-tk1: switch to upstream DT Lucas Stach
2014-11-02 20:13 ` [PATCH 06/13] clk: tegra: slow down MSELECT to 102MHz Lucas Stach
2014-11-02 20:13 ` [PATCH 07/13] tegra: pmc: work around power domain failure Lucas Stach
2014-11-02 20:13 ` [PATCH 08/13] tegra: jetson-tk1: enable 1.05V_RUN Lucas Stach
2014-11-02 20:13 ` [PATCH 09/13] clk: tegra124: add PLLE setup functions Lucas Stach
2014-11-02 20:13 ` [PATCH 10/13] clk: tegra124: add PCIe clocks Lucas Stach
2014-11-02 20:13 ` [PATCH 11/13] add generic PHY framework Lucas Stach
2014-11-02 20:13 ` [PATCH 12/13] pinctrl: tegra: add XUSB pad controller Lucas Stach
2014-11-02 20:13 ` [PATCH 13/13] pci: tegra: add tegra124 support Lucas Stach
2014-11-03 8:40 ` [PATCH 00/13] Tegra124 PCIe Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1414959235-18095-1-git-send-email-dev@lynxeye.de \
--to=dev@lynxeye.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox