mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 11/11] ARM: i.MX: update imx_v7_defconfig
Date: Wed, 26 Nov 2014 17:29:54 +0100	[thread overview]
Message-ID: <1417019394-23683-12-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1417019394-23683-1-git-send-email-s.hauer@pengutronix.de>

Enable support for the i.MX6sx sabresdb and the KaRo Tx6x.
The sabresdb needs regulator support, so enable this aswell.
Also enable usbserial support.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/configs/imx_v7_defconfig | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/arch/arm/configs/imx_v7_defconfig b/arch/arm/configs/imx_v7_defconfig
index 7076ecd..a921c90 100644
--- a/arch/arm/configs/imx_v7_defconfig
+++ b/arch/arm/configs/imx_v7_defconfig
@@ -13,8 +13,10 @@ CONFIG_MACH_GUF_SANTARO=y
 CONFIG_MACH_REALQ7=y
 CONFIG_MACH_GK802=y
 CONFIG_MACH_TQMA6X=y
+CONFIG_MACH_TX6X=y
 CONFIG_MACH_SABRELITE=y
 CONFIG_MACH_SABRESD=y
+CONFIG_MACH_FREESCALE_IMX6SX_SABRESDB=y
 CONFIG_MACH_NITROGEN6X=y
 CONFIG_MACH_SOLIDRUN_MICROSOM=y
 CONFIG_MACH_EMBEST_RIOTBOARD=y
@@ -46,6 +48,7 @@ CONFIG_LONGHELP=y
 CONFIG_CMD_IOMEM=y
 CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_ARM_MMUINFO=y
+CONFIG_CMD_REGULATOR=y
 CONFIG_CMD_BOOTM_SHOW_TYPE=y
 CONFIG_CMD_BOOTM_VERBOSE=y
 CONFIG_CMD_BOOTM_INITRD=y
@@ -94,6 +97,7 @@ CONFIG_CMD_I2C=y
 CONFIG_CMD_LED=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_LED_TRIGGER=y
+CONFIG_CMD_USBGADGET=y
 CONFIG_CMD_WD=y
 CONFIG_CMD_BAREBOX_UPDATE=y
 CONFIG_CMD_OF_NODE=y
@@ -103,7 +107,6 @@ CONFIG_CMD_TIME=y
 CONFIG_NET=y
 CONFIG_NET_NETCONSOLE=y
 CONFIG_NET_RESOLV=y
-CONFIG_OFDEVICE=y
 CONFIG_OF_BAREBOX_DRIVERS=y
 CONFIG_DRIVER_NET_FEC_IMX=y
 CONFIG_AT803X_PHY=y
@@ -111,9 +114,6 @@ CONFIG_MICREL_PHY=y
 CONFIG_NET_USB=y
 CONFIG_NET_USB_ASIX=y
 CONFIG_NET_USB_SMSC95XX=y
-CONFIG_DRIVER_SPI_IMX=y
-CONFIG_I2C=y
-CONFIG_I2C_IMX=y
 CONFIG_MTD=y
 CONFIG_MTD_RAW_DEVICE=y
 CONFIG_MTD_DATAFLASH=y
@@ -137,6 +137,7 @@ CONFIG_USB_ULPI=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DFU=y
+CONFIG_USB_GADGET_SERIAL=y
 CONFIG_VIDEO=y
 CONFIG_DRIVER_VIDEO_IMX_IPUV3=y
 CONFIG_DRIVER_VIDEO_IMX_IPUV3_LVDS=y
@@ -146,7 +147,6 @@ CONFIG_DRIVER_VIDEO_EDID=y
 CONFIG_MCI=y
 CONFIG_MCI_MMC_BOOT_PARTITIONS=y
 CONFIG_MCI_IMX_ESDHC=y
-CONFIG_MFD_MC13XXX=y
 CONFIG_MFD_MC34704=y
 CONFIG_MFD_MC9SDZ60=y
 CONFIG_MFD_STMPE=y
@@ -162,6 +162,8 @@ CONFIG_PWM=y
 CONFIG_PWM_IMX=y
 CONFIG_MXS_APBH_DMA=y
 CONFIG_GPIO_STMPE=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED=y
 CONFIG_FS_EXT4=y
 CONFIG_FS_TFTP=y
 CONFIG_FS_NFS=y
-- 
2.1.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      parent reply	other threads:[~2014-11-26 16:30 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-26 16:29 Add i.MX6 SoloX support Sascha Hauer
2014-11-26 16:29 ` [PATCH 01/11] mci: imx-esdhc: Fix Interrupt enable register for i.MX6sx Sascha Hauer
2014-11-26 16:29 ` [PATCH 02/11] mci: imx-esdhc: Add i.MX6sl compatible Sascha Hauer
2014-11-26 16:29 ` [PATCH 03/11] serial: i.MX: Use "per" clk Sascha Hauer
2014-11-26 16:29 ` [PATCH 04/11] net: fec_imx: Add i.MX6sx compatible entry Sascha Hauer
2014-11-26 16:29 ` [PATCH 05/11] imx-usb-loader: Add i.MX6sx support Sascha Hauer
2014-11-26 16:29 ` [PATCH 06/11] pinctrl: Add i.MX6sx compatible entry Sascha Hauer
2014-11-26 16:29 ` [PATCH 07/11] ARM: i.MX: ocotp: Fix MAC address provider for unaligned addresses Sascha Hauer
2014-11-26 16:29 ` [PATCH 08/11] ARM: i.MX: ocotp: Add i.MX6sx compatible entry Sascha Hauer
2014-11-26 16:29 ` [PATCH 09/11] ARM: i.MX: Add i.MX6sx support Sascha Hauer
2014-11-26 16:29 ` [PATCH 10/11] ARM: i.MX: Add i.MX6sx sabresdb support Sascha Hauer
2014-11-26 17:06   ` Lucas Stach
2014-11-27 10:26     ` Sascha Hauer
2014-11-26 16:29 ` Sascha Hauer [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1417019394-23683-12-git-send-email-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox