* [PATCH 1/2] Documentation: add Raspberry Pi barebox mini-howto
@ 2014-12-24 22:53 Antony Pavlov
2014-12-24 22:53 ` [PATCH 2/2] ARM: rpi_defconfig: enable loady command Antony Pavlov
2015-01-05 10:32 ` [PATCH 1/2] Documentation: add Raspberry Pi barebox mini-howto Sascha Hauer
0 siblings, 2 replies; 3+ messages in thread
From: Antony Pavlov @ 2014-12-24 22:53 UTC (permalink / raw)
To: barebox
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
Documentation/boards/bcm2835.rst | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
create mode 100644 Documentation/boards/bcm2835.rst
diff --git a/Documentation/boards/bcm2835.rst b/Documentation/boards/bcm2835.rst
new file mode 100644
index 0000000..13cebb0
--- /dev/null
+++ b/Documentation/boards/bcm2835.rst
@@ -0,0 +1,17 @@
+Broadcom BCM2835
+================
+
+Raspberry Pi
+------------
+
+ 1. Prepare a card with a FAT filesystem. Download a tiny NOOBS LITE
+ zip archive and unpack it into FAT partition.
+ See http://www.raspberrypi.org/help/noobs-setup/ for details.
+
+ 2. Compile ``barebox.bin`` image (use ``rpi_defconfig``).
+ Copy it to the SD/microSD card and name it ``recovery.img``.
+
+ 3. Connect to board's UART (115200 8N1);
+ Use PIN6 (GND), PIN8 (UART_TX), PIN10 (UART_RX) pins.
+
+ 4. Turn board's power on.
--
2.1.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH 2/2] ARM: rpi_defconfig: enable loady command
2014-12-24 22:53 [PATCH 1/2] Documentation: add Raspberry Pi barebox mini-howto Antony Pavlov
@ 2014-12-24 22:53 ` Antony Pavlov
2015-01-05 10:32 ` [PATCH 1/2] Documentation: add Raspberry Pi barebox mini-howto Sascha Hauer
1 sibling, 0 replies; 3+ messages in thread
From: Antony Pavlov @ 2014-12-24 22:53 UTC (permalink / raw)
To: barebox
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
arch/arm/configs/rpi_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/rpi_defconfig b/arch/arm/configs/rpi_defconfig
index 05c0136..c6b2c50 100644
--- a/arch/arm/configs/rpi_defconfig
+++ b/arch/arm/configs/rpi_defconfig
@@ -31,6 +31,7 @@ CONFIG_CMD_LN=y
CONFIG_CMD_FILETYPE=y
CONFIG_CMD_ECHO_E=y
CONFIG_CMD_LOADB=y
+CONFIG_CMD_LOADY=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_IOMEM=y
CONFIG_CMD_MM=y
--
2.1.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH 1/2] Documentation: add Raspberry Pi barebox mini-howto
2014-12-24 22:53 [PATCH 1/2] Documentation: add Raspberry Pi barebox mini-howto Antony Pavlov
2014-12-24 22:53 ` [PATCH 2/2] ARM: rpi_defconfig: enable loady command Antony Pavlov
@ 2015-01-05 10:32 ` Sascha Hauer
1 sibling, 0 replies; 3+ messages in thread
From: Sascha Hauer @ 2015-01-05 10:32 UTC (permalink / raw)
To: Antony Pavlov; +Cc: barebox
On Thu, Dec 25, 2014 at 01:53:42AM +0300, Antony Pavlov wrote:
> Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
> ---
> Documentation/boards/bcm2835.rst | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
> create mode 100644 Documentation/boards/bcm2835.rst
Applied, thanks
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2015-01-05 10:33 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-12-24 22:53 [PATCH 1/2] Documentation: add Raspberry Pi barebox mini-howto Antony Pavlov
2014-12-24 22:53 ` [PATCH 2/2] ARM: rpi_defconfig: enable loady command Antony Pavlov
2015-01-05 10:32 ` [PATCH 1/2] Documentation: add Raspberry Pi barebox mini-howto Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox