From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from smtp10.smtpout.orange.fr ([80.12.242.132] helo=smtp.smtpout.orange.fr) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1Y7hgr-0005Hv-7B for barebox@lists.infradead.org; Sun, 04 Jan 2015 09:41:45 +0000 From: Robert Jarzmik Date: Sun, 4 Jan 2015 10:41:05 +0100 Message-Id: <1420364466-22400-1-git-send-email-robert.jarzmik@free.fr> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH v2 1/2] ARM: pxa: add pxa3xx architecture To: barebox@lists.infradead.org Add the pxa3xx architecture, for pxa300, pxa310 and pxa320 SoCs. This includes : - the registers - the cpu type - the reset source handling - a minimal set of clocks - pin control definitions In this last case, the big mfp-pxaxxx.h files were dropped, forcing board developers to use MFP_LPM_* macros cunningly. Signed-off-by: Robert Jarzmik --- arch/arm/cpu/Kconfig | 6 + arch/arm/mach-pxa/Kconfig | 19 ++ arch/arm/mach-pxa/Makefile | 1 + arch/arm/mach-pxa/common.c | 12 +- arch/arm/mach-pxa/include/mach/clock.h | 1 + arch/arm/mach-pxa/include/mach/hardware.h | 18 +- arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h | 25 ++ arch/arm/mach-pxa/include/mach/pxa-regs.h | 4 +- arch/arm/mach-pxa/include/mach/pxa3xx-regs.h | 224 ++++++++++++++++++ arch/arm/mach-pxa/include/plat/mfp.h | 7 +- arch/arm/mach-pxa/mfp.c | 338 +++++++++++++++++++++++++++ arch/arm/mach-pxa/reset_source.c | 36 +++ arch/arm/mach-pxa/sleep.S | 9 + arch/arm/mach-pxa/speed-pxa3xx.c | 33 +++ 14 files changed, 725 insertions(+), 8 deletions(-) create mode 100644 arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h create mode 100644 arch/arm/mach-pxa/include/mach/pxa3xx-regs.h create mode 100644 arch/arm/mach-pxa/mfp.c create mode 100644 arch/arm/mach-pxa/speed-pxa3xx.c diff --git a/arch/arm/cpu/Kconfig b/arch/arm/cpu/Kconfig index 8934df0..4f5d9b6 100644 --- a/arch/arm/cpu/Kconfig +++ b/arch/arm/cpu/Kconfig @@ -69,6 +69,12 @@ config CPU_V7 bool select CPU_32v7 +config CPU_XSC3 + bool + select CPU_32v4T + help + Select code specific to PXA3xx variants + # Xscale PXA25x, PXA27x config CPU_XSCALE bool diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index cdec1b7..3a728ed 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -11,6 +11,10 @@ config ARCH_PXA2XX bool select CPU_XSCALE +config ARCH_PXA3XX + bool + select CPU_XSC3 + choice prompt "Intel/Marvell PXA Processor" @@ -18,6 +22,9 @@ config ARCH_PXA27X bool "PXA27x" select ARCH_PXA2XX +config ARCH_PXA3XX + bool "PXA3xx" + endchoice # ---------------------------------------------------------- @@ -55,4 +62,16 @@ endif # ---------------------------------------------------------- +if ARCH_PXA3XX + +choice + prompt "PXA3xx Board Type" + bool + +endchoice + +endif + +# ---------------------------------------------------------- + endif diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 6ddb6e5..6489601 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -6,4 +6,5 @@ obj-y += sleep.o obj-$(CONFIG_ARCH_PXA2XX) += mfp-pxa2xx.o obj-$(CONFIG_ARCH_PXA27X) += speed-pxa27x.o +obj-$(CONFIG_ARCH_PXA3XX) += speed-pxa3xx.o mfp.o obj-$(CONFIG_RESET_SOURCE) += reset_source.o diff --git a/arch/arm/mach-pxa/common.c b/arch/arm/mach-pxa/common.c index 0c114ed..2259a2d 100644 --- a/arch/arm/mach-pxa/common.c +++ b/arch/arm/mach-pxa/common.c @@ -28,11 +28,13 @@ #define OSSR_M3 (1 << 3) /* Match status channel 3 */ extern void pxa_suspend(int mode); +extern void pxa3xx_suspend(int mode); +extern void pxa_clear_reset_source(void); void reset_cpu(ulong addr) { /* Clear last reset source */ - RCSR = RCSR_GPR | RCSR_SMR | RCSR_WDR | RCSR_HWR; + pxa_clear_reset_source(); /* Initialize the watchdog and let it fire */ writel(OWER_WME, OWER); @@ -47,8 +49,12 @@ void __noreturn poweroff() shutdown_barebox(); /* Clear last reset source */ - RCSR = RCSR_GPR | RCSR_SMR | RCSR_WDR | RCSR_HWR; - + pxa_clear_reset_source(); +#ifdef CONFIG_ARCH_PXA2XX pxa_suspend(PWRMODE_DEEPSLEEP); +#endif +#ifdef CONFIG_ARCH_PXA3XX + pxa3xx_suspend(PXA3xx_PM_S3D4C4); +#endif unreachable(); } diff --git a/arch/arm/mach-pxa/include/mach/clock.h b/arch/arm/mach-pxa/include/mach/clock.h index f86152f..40f6223 100644 --- a/arch/arm/mach-pxa/include/mach/clock.h +++ b/arch/arm/mach-pxa/include/mach/clock.h @@ -14,6 +14,7 @@ unsigned long pxa_get_uartclk(void); unsigned long pxa_get_mmcclk(void); unsigned long pxa_get_lcdclk(void); +unsigned long pxa_get_nandclk(void); unsigned long pxa_get_pwmclk(void); #endif /* !__MACH_CLOCK_H */ diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h index c5f40d7..902d11d 100644 --- a/arch/arm/mach-pxa/include/mach/hardware.h +++ b/arch/arm/mach-pxa/include/mach/hardware.h @@ -13,7 +13,7 @@ #ifdef CONFIG_ARCH_PXA2XX #define cpu_is_pxa2xx() (1) #else -#define cpi_is_pxa2xx() (0) +#define cpu_is_pxa2xx() (0) #endif #ifdef CONFIG_ARCH_PXA25X @@ -28,6 +28,22 @@ #define cpu_is_pxa27x() (0) #endif +#ifdef CONFIG_ARCH_PXA3XX +#define cpu_is_pxa3xx() (1) +# ifdef CONFIG_ARCH_PXA320 +# define cpu_is_pxa320() (1) +# else +# define cpu_is_pxa320() (0) +# endif +# ifdef CONFIG_ARCH_PXA310 +# define cpu_is_pxa310() (1) +# else +# define cpu_is_pxa310() (0) +# endif +#else +#define cpu_is_pxa3xx() (0) +#endif + #ifdef __ASSEMBLY__ #define __REG(x) (x) #endif diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h new file mode 100644 index 0000000..7bdd44d --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h @@ -0,0 +1,25 @@ +#ifndef __ASM_ARCH_MFP_PXA3XX_H +#define __ASM_ARCH_MFP_PXA3XX_H + +#include + +#define MFPR_BASE (0x40e10000) + +/* NOTE: usage of these two functions is not recommended, + * use pxa3xx_mfp_config() instead. + */ +static inline unsigned long pxa3xx_mfp_read(int mfp) +{ + return mfp_read(mfp); +} + +static inline void pxa3xx_mfp_write(int mfp, unsigned long val) +{ + mfp_write(mfp, val); +} + +static inline void pxa3xx_mfp_config(unsigned long *mfp_cfg, int num) +{ + mfp_config(mfp_cfg, num); +} +#endif /* __ASM_ARCH_MFP_PXA3XX_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h index c32d2ae..5203d88 100644 --- a/arch/arm/mach-pxa/include/mach/pxa-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h @@ -24,8 +24,10 @@ # include #endif -#ifdef CONFIG_ARCH_PXA27X +#if defined(CONFIG_ARCH_PXA27X) # include +#elif defined(CONFIG_ARCH_PXA3XX) +# include #else # error "unknown PXA soc type" #endif diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h new file mode 100644 index 0000000..373711d --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h @@ -0,0 +1,224 @@ +/* + * arch/arm/mach-pxa/include/mach/pxa3xx-regs.h + * + * PXA3xx specific register definitions + * + * Copyright (C) 2007 Marvell International Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_PXA3XX_REGS +#define __MACH_PXA3XX_REGS + +#include + +/* + * Oscillator Configuration Register (OSCC) + */ +#define OSCC __REG(0x41350000) /* Oscillator Configuration Register */ + +#define OSCC_PEN (1 << 11) /* 13MHz POUT */ + + +/* + * Service Power Management Unit (MPMU) + */ +#define PMCR __REG(0x40F50000) /* Power Manager Control Register */ +#define PSR __REG(0x40F50004) /* Power Manager S2 Status Register */ +#define PSPR __REG(0x40F50008) /* Power Manager Scratch Pad Register */ +#define PCFR __REG(0x40F5000C) /* Power Manager General Configuration Register */ +#define PWER __REG(0x40F50010) /* Power Manager Wake-up Enable Register */ +#define PWSR __REG(0x40F50014) /* Power Manager Wake-up Status Register */ +#define PECR __REG(0x40F50018) /* Power Manager EXT_WAKEUP[1:0] Control Register */ +#define DCDCSR __REG(0x40F50080) /* DC-DC Controller Status Register */ +#define PVCR __REG(0x40F50100) /* Power Manager Voltage Change Control Register */ +#define PCMD(x) __REG(0x40F50110 + ((x) << 2)) + +/* + * Slave Power Management Unit + */ +#define ASCR __REG(0x40f40000) /* Application Subsystem Power Status/Configuration */ +#define ARSR __REG(0x40f40004) /* Application Subsystem Reset Status */ +#define AD3ER __REG(0x40f40008) /* Application Subsystem Wake-Up from D3 Enable */ +#define AD3SR __REG(0x40f4000c) /* Application Subsystem Wake-Up from D3 Status */ +#define AD2D0ER __REG(0x40f40010) /* Application Subsystem Wake-Up from D2 to D0 Enable */ +#define AD2D0SR __REG(0x40f40014) /* Application Subsystem Wake-Up from D2 to D0 Status */ +#define AD2D1ER __REG(0x40f40018) /* Application Subsystem Wake-Up from D2 to D1 Enable */ +#define AD2D1SR __REG(0x40f4001c) /* Application Subsystem Wake-Up from D2 to D1 Status */ +#define AD1D0ER __REG(0x40f40020) /* Application Subsystem Wake-Up from D1 to D0 Enable */ +#define AD1D0SR __REG(0x40f40024) /* Application Subsystem Wake-Up from D1 to D0 Status */ +#define AGENP __REG(0x40f4002c) /* Application Subsystem General Purpose */ +#define AD3R __REG(0x40f40030) /* Application Subsystem D3 Configuration */ +#define AD2R __REG(0x40f40034) /* Application Subsystem D2 Configuration */ +#define AD1R __REG(0x40f40038) /* Application Subsystem D1 Configuration */ + +/* + * Application Subsystem Configuration bits. + */ +#define ASCR_RDH (1 << 31) +#define ASCR_D1S (1 << 2) +#define ASCR_D2S (1 << 1) +#define ASCR_D3S (1 << 0) + +/* + * Application Reset Status bits. + */ +#define ARSR_GPR (1 << 3) +#define ARSR_LPMR (1 << 2) +#define ARSR_WDT (1 << 1) +#define ARSR_HWR (1 << 0) + +/* + * Application Subsystem Wake-Up bits. + */ +#define ADXER_WRTC (1 << 31) /* RTC */ +#define ADXER_WOST (1 << 30) /* OS Timer */ +#define ADXER_WTSI (1 << 29) /* Touchscreen */ +#define ADXER_WUSBH (1 << 28) /* USB host */ +#define ADXER_WUSB2 (1 << 26) /* USB client 2.0 */ +#define ADXER_WMSL0 (1 << 24) /* MSL port 0*/ +#define ADXER_WDMUX3 (1 << 23) /* USB EDMUX3 */ +#define ADXER_WDMUX2 (1 << 22) /* USB EDMUX2 */ +#define ADXER_WKP (1 << 21) /* Keypad */ +#define ADXER_WUSIM1 (1 << 20) /* USIM Port 1 */ +#define ADXER_WUSIM0 (1 << 19) /* USIM Port 0 */ +#define ADXER_WOTG (1 << 16) /* USBOTG input */ +#define ADXER_MFP_WFLASH (1 << 15) /* MFP: Data flash busy */ +#define ADXER_MFP_GEN12 (1 << 14) /* MFP: MMC3/GPIO/OST inputs */ +#define ADXER_MFP_WMMC2 (1 << 13) /* MFP: MMC2 */ +#define ADXER_MFP_WMMC1 (1 << 12) /* MFP: MMC1 */ +#define ADXER_MFP_WI2C (1 << 11) /* MFP: I2C */ +#define ADXER_MFP_WSSP4 (1 << 10) /* MFP: SSP4 */ +#define ADXER_MFP_WSSP3 (1 << 9) /* MFP: SSP3 */ +#define ADXER_MFP_WMAXTRIX (1 << 8) /* MFP: matrix keypad */ +#define ADXER_MFP_WUART3 (1 << 7) /* MFP: UART3 */ +#define ADXER_MFP_WUART2 (1 << 6) /* MFP: UART2 */ +#define ADXER_MFP_WUART1 (1 << 5) /* MFP: UART1 */ +#define ADXER_MFP_WSSP2 (1 << 4) /* MFP: SSP2 */ +#define ADXER_MFP_WSSP1 (1 << 3) /* MFP: SSP1 */ +#define ADXER_MFP_WAC97 (1 << 2) /* MFP: AC97 */ +#define ADXER_WEXTWAKE1 (1 << 1) /* External Wake 1 */ +#define ADXER_WEXTWAKE0 (1 << 0) /* External Wake 0 */ + +/* + * AD3R/AD2R/AD1R bits. R2-R5 are only defined for PXA320. + */ +#define ADXR_L2 (1 << 8) +#define ADXR_R5 (1 << 5) +#define ADXR_R4 (1 << 4) +#define ADXR_R3 (1 << 3) +#define ADXR_R2 (1 << 2) +#define ADXR_R1 (1 << 1) +#define ADXR_R0 (1 << 0) + +/* + * Values for PWRMODE CP15 register + */ +#define PXA3xx_PM_S3D4C4 0x07 /* aka deep sleep */ +#define PXA3xx_PM_S2D3C4 0x06 /* aka sleep */ +#define PXA3xx_PM_S0D2C2 0x03 /* aka standby */ +#define PXA3xx_PM_S0D1C2 0x02 /* aka LCD refresh */ +#define PXA3xx_PM_S0D0C1 0x01 + +/* + * Application Subsystem Clock + */ +#define ACCR __REG(0x41340000) /* Application Subsystem Clock Configuration Register */ +#define ACSR __REG(0x41340004) /* Application Subsystem Clock Status Register */ +#define AICSR __REG(0x41340008) /* Application Subsystem Interrupt Control/Status Register */ +#define CKENA __REG(0x4134000C) /* A Clock Enable Register */ +#define CKENB __REG(0x41340010) /* B Clock Enable Register */ +#define CKENC __REG(0x41340024) /* C Clock Enable Register */ +#define AC97_DIV __REG(0x41340014) /* AC97 clock divisor value register */ + +#define ACCR_XPDIS (1 << 31) /* Core PLL Output Disable */ +#define ACCR_SPDIS (1 << 30) /* System PLL Output Disable */ +#define ACCR_D0CS (1 << 26) /* D0 Mode Clock Select */ +#define ACCR_PCCE (1 << 11) /* Power Mode Change Clock Enable */ +#define ACCR_DDR_D0CS (1 << 7) /* DDR SDRAM clock frequency in D0CS (PXA31x only) */ + +#define ACCR_SMCFS_MASK (0x7 << 23) /* Static Memory Controller Frequency Select */ +#define ACCR_SFLFS_MASK (0x3 << 18) /* Frequency Select for Internal Memory Controller */ +#define ACCR_XSPCLK_MASK (0x3 << 16) /* Core Frequency during Frequency Change */ +#define ACCR_HSS_MASK (0x3 << 14) /* System Bus-Clock Frequency Select */ +#define ACCR_DMCFS_MASK (0x3 << 12) /* Dynamic Memory Controller Clock Frequency Select */ +#define ACCR_XN_MASK (0x7 << 8) /* Core PLL Turbo-Mode-to-Run-Mode Ratio */ +#define ACCR_XL_MASK (0x1f) /* Core PLL Run-Mode-to-Oscillator Ratio */ + +#define ACCR_SMCFS(x) (((x) & 0x7) << 23) +#define ACCR_SFLFS(x) (((x) & 0x3) << 18) +#define ACCR_XSPCLK(x) (((x) & 0x3) << 16) +#define ACCR_HSS(x) (((x) & 0x3) << 14) +#define ACCR_DMCFS(x) (((x) & 0x3) << 12) +#define ACCR_XN(x) (((x) & 0x7) << 8) +#define ACCR_XL(x) ((x) & 0x1f) + +/* + * Clock Enable Bit + */ +#define CKEN_LCD 1 /* < LCD Clock Enable */ +#define CKEN_USBH 2 /* < USB host clock enable */ +#define CKEN_CAMERA 3 /* < Camera interface clock enable */ +#define CKEN_NAND 4 /* < NAND Flash Controller Clock Enable */ +#define CKEN_USB2 6 /* < USB 2.0 client clock enable. */ +#define CKEN_DMC 8 /* < Dynamic Memory Controller clock enable */ +#define CKEN_SMC 9 /* < Static Memory Controller clock enable */ +#define CKEN_ISC 10 /* < Internal SRAM Controller clock enable */ +#define CKEN_BOOT 11 /* < Boot rom clock enable */ +#define CKEN_MMC1 12 /* < MMC1 Clock enable */ +#define CKEN_MMC2 13 /* < MMC2 clock enable */ +#define CKEN_KEYPAD 14 /* < Keypand Controller Clock Enable */ +#define CKEN_CIR 15 /* < Consumer IR Clock Enable */ +#define CKEN_USIM0 17 /* < USIM[0] Clock Enable */ +#define CKEN_USIM1 18 /* < USIM[1] Clock Enable */ +#define CKEN_TPM 19 /* < TPM clock enable */ +#define CKEN_UDC 20 /* < UDC clock enable */ +#define CKEN_BTUART 21 /* < BTUART clock enable */ +#define CKEN_FFUART 22 /* < FFUART clock enable */ +#define CKEN_STUART 23 /* < STUART clock enable */ +#define CKEN_AC97 24 /* < AC97 clock enable */ +#define CKEN_TOUCH 25 /* < Touch screen Interface Clock Enable */ +#define CKEN_SSP1 26 /* < SSP1 clock enable */ +#define CKEN_SSP2 27 /* < SSP2 clock enable */ +#define CKEN_SSP3 28 /* < SSP3 clock enable */ +#define CKEN_SSP4 29 /* < SSP4 clock enable */ +#define CKEN_MSL0 30 /* < MSL0 clock enable */ +#define CKEN_PWM0 32 /* < PWM[0] clock enable */ +#define CKEN_PWM1 33 /* < PWM[1] clock enable */ +#define CKEN_I2C 36 /* < I2C clock enable */ +#define CKEN_INTC 38 /* < Interrupt controller clock enable */ +#define CKEN_GPIO 39 /* < GPIO clock enable */ +#define CKEN_1WIRE 40 /* < 1-wire clock enable */ +#define CKEN_HSIO2 41 /* < HSIO2 clock enable */ +#define CKEN_MINI_IM 48 /* < Mini-IM */ +#define CKEN_MINI_LCD 49 /* < Mini LCD */ + +#define CKEN_MMC3 5 /* < MMC3 Clock Enable */ +#define CKEN_MVED 43 /* < MVED clock enable */ + +/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */ +#define CKEN_PXA300_GCU 42 /* Graphics controller clock enable */ +#define CKEN_PXA320_GCU 7 /* Graphics controller clock enable */ + +/* + * Static Memory Controller + */ +#define MSC0 __REG(0x4a000008) /* Static Memory Control 0 */ +#define MSC1 __REG(0x4a00000c) /* Static Memory Control 1 */ +#define MECR __REG(0x4a000014) /* Expansion Memory Configuration */ +#define SXCNFG __REG(0x4a00001c) /* Synchronous Static Memory Control */ +#define MCMEM0 __REG(0x4a000028) /* Expansion Memory Timing */ +#define MCATT0 __REG(0x4a000030) /* Expansion Memory Timing */ +#define MCIO0 __REG(0x4a000038) /* Expansion Memory Timing */ +#define MEMCLKCFG __REG(0x4a000068) /* Clock configuration */ +#define CSADRCFG0 __REG(0x4a000080) /* CS0 address configuration */ +#define CSADRCFG1 __REG(0x4a000084) /* CS1 address configuration */ +#define CSADRCFG2 __REG(0x4a000088) /* CS2 address configuration */ +#define CSADRCFG3 __REG(0x4a00008c) /* CS3 address configuration */ +#define CSADRCFGP __REG(0x4a000090) /* CSP address configuration */ +#define CSMSADRCFG __REG(0x4a0000a0) /* CSP address configuration */ + +#endif /* !__MACH_PXA3XX_REGS */ diff --git a/arch/arm/mach-pxa/include/plat/mfp.h b/arch/arm/mach-pxa/include/plat/mfp.h index 755b020..aedb956 100644 --- a/arch/arm/mach-pxa/include/plat/mfp.h +++ b/arch/arm/mach-pxa/include/plat/mfp.h @@ -416,7 +416,7 @@ typedef unsigned long mfp_cfg_t; ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\ (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm)) -#if defined(CONFIG_PXA3xx) || defined(CONFIG_ARCH_MMP) +#if defined(CONFIG_ARCH_PXA3XX) /* * each MFP pin will have a MFPR register, since the offset of the * register varies between processors, the processor specific code @@ -449,7 +449,7 @@ struct mfp_addr_map { #define MFP_ADDR_END { MFP_PIN_INVALID, 0 } -void __init mfp_init_base(unsigned long mfpr_base); +void __init mfp_init_base(void __iomem *mfpr_base); void __init mfp_init_addr(struct mfp_addr_map *map); /* @@ -463,6 +463,7 @@ void mfp_write(int mfp, unsigned long mfpr_val); void mfp_config(unsigned long *mfp_cfgs, int num); void mfp_config_run(void); void mfp_config_lpm(void); -#endif /* CONFIG_PXA3xx || CONFIG_ARCH_MMP */ +void mfp_init(void); +#endif /* CONFIG_ARCH_PXA3XX */ #endif /* __ASM_PLAT_MFP_H */ diff --git a/arch/arm/mach-pxa/mfp.c b/arch/arm/mach-pxa/mfp.c new file mode 100644 index 0000000..df49224 --- /dev/null +++ b/arch/arm/mach-pxa/mfp.c @@ -0,0 +1,338 @@ +/* + * linux/arch/arm/plat-pxa/mfp.c + * + * Multi-Function Pin Support + * + * Copyright (C) 2007 Marvell Internation Ltd. + * + * 2007-08-21: eric miao + * initial version + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#define MFPR_SIZE (PAGE_SIZE) + +/* MFPR register bit definitions */ +#define MFPR_PULL_SEL (0x1 << 15) +#define MFPR_PULLUP_EN (0x1 << 14) +#define MFPR_PULLDOWN_EN (0x1 << 13) +#define MFPR_SLEEP_SEL (0x1 << 9) +#define MFPR_SLEEP_OE_N (0x1 << 7) +#define MFPR_EDGE_CLEAR (0x1 << 6) +#define MFPR_EDGE_FALL_EN (0x1 << 5) +#define MFPR_EDGE_RISE_EN (0x1 << 4) + +#define MFPR_SLEEP_DATA(x) ((x) << 8) +#define MFPR_DRIVE(x) (((x) & 0x7) << 10) +#define MFPR_AF_SEL(x) (((x) & 0x7) << 0) + +#define MFPR_EDGE_NONE (0) +#define MFPR_EDGE_RISE (MFPR_EDGE_RISE_EN) +#define MFPR_EDGE_FALL (MFPR_EDGE_FALL_EN) +#define MFPR_EDGE_BOTH (MFPR_EDGE_RISE | MFPR_EDGE_FALL) + +/* + * Table that determines the low power modes outputs, with actual settings + * used in parentheses for don't-care values. Except for the float output, + * the configured driven and pulled levels match, so if there is a need for + * non-LPM pulled output, the same configuration could probably be used. + * + * Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel + * (bit 7) (bit 8) (bit 14) (bit 13) (bit 15) + * + * Input 0 X(0) X(0) X(0) 0 + * Drive 0 0 0 0 X(1) 0 + * Drive 1 0 1 X(1) 0 0 + * Pull hi (1) 1 X(1) 1 0 0 + * Pull lo (0) 1 X(0) 0 1 0 + * Z (float) 1 X(0) 0 0 0 + */ +#define MFPR_LPM_INPUT (0) +#define MFPR_LPM_DRIVE_LOW (MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN) +#define MFPR_LPM_DRIVE_HIGH (MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN) +#define MFPR_LPM_PULL_LOW (MFPR_LPM_DRIVE_LOW | MFPR_SLEEP_OE_N) +#define MFPR_LPM_PULL_HIGH (MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N) +#define MFPR_LPM_FLOAT (MFPR_SLEEP_OE_N) +#define MFPR_LPM_MASK (0xe080) + +/* + * The pullup and pulldown state of the MFP pin at run mode is by default + * determined by the selected alternate function. In case that some buggy + * devices need to override this default behavior, the definitions below + * indicates the setting of corresponding MFPR bits + * + * Definition pull_sel pullup_en pulldown_en + * MFPR_PULL_NONE 0 0 0 + * MFPR_PULL_LOW 1 0 1 + * MFPR_PULL_HIGH 1 1 0 + * MFPR_PULL_BOTH 1 1 1 + * MFPR_PULL_FLOAT 1 0 0 + */ +#define MFPR_PULL_NONE (0) +#define MFPR_PULL_LOW (MFPR_PULL_SEL | MFPR_PULLDOWN_EN) +#define MFPR_PULL_BOTH (MFPR_PULL_LOW | MFPR_PULLUP_EN) +#define MFPR_PULL_HIGH (MFPR_PULL_SEL | MFPR_PULLUP_EN) +#define MFPR_PULL_FLOAT (MFPR_PULL_SEL) + +/* mfp_spin_lock is used to ensure that MFP register configuration + * (most likely a read-modify-write operation) is atomic, and that + * mfp_table[] is consistent + */ +static void __iomem *mfpr_mmio_base; + +struct mfp_pin { + unsigned long config; /* -1 for not configured */ + unsigned long mfpr_off; /* MFPRxx Register offset */ + unsigned long mfpr_run; /* Run-Mode Register Value */ + unsigned long mfpr_lpm; /* Low Power Mode Register Value */ +}; + +static struct mfp_pin mfp_table[MFP_PIN_MAX]; + +/* mapping of MFP_LPM_* definitions to MFPR_LPM_* register bits */ +static const unsigned long mfpr_lpm[] = { + MFPR_LPM_INPUT, + MFPR_LPM_DRIVE_LOW, + MFPR_LPM_DRIVE_HIGH, + MFPR_LPM_PULL_LOW, + MFPR_LPM_PULL_HIGH, + MFPR_LPM_FLOAT, + MFPR_LPM_INPUT, +}; + +/* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */ +static const unsigned long mfpr_pull[] = { + MFPR_PULL_NONE, + MFPR_PULL_LOW, + MFPR_PULL_HIGH, + MFPR_PULL_BOTH, + MFPR_PULL_FLOAT, +}; + +/* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */ +static const unsigned long mfpr_edge[] = { + MFPR_EDGE_NONE, + MFPR_EDGE_RISE, + MFPR_EDGE_FALL, + MFPR_EDGE_BOTH, +}; + +#define mfpr_readl(off) \ + __raw_readl(mfpr_mmio_base + (off)) + +#define mfpr_writel(off, val) \ + __raw_writel(val, mfpr_mmio_base + (off)) + +#define mfp_configured(p) ((p)->config != -1) + +/* + * perform a read-back of any valid MFPR register to make sure the + * previous writings are finished + */ +static unsigned long mfpr_off_readback; +#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + mfpr_off_readback) + +static inline void __mfp_config_run(struct mfp_pin *p) +{ + if (mfp_configured(p)) + mfpr_writel(p->mfpr_off, p->mfpr_run); +} + +static inline void __mfp_config_lpm(struct mfp_pin *p) +{ + if (mfp_configured(p)) { + unsigned long mfpr_clr = + (p->mfpr_run & ~MFPR_EDGE_BOTH) | MFPR_EDGE_CLEAR; + + if (mfpr_clr != p->mfpr_run) + mfpr_writel(p->mfpr_off, mfpr_clr); + if (p->mfpr_lpm != mfpr_clr) + mfpr_writel(p->mfpr_off, p->mfpr_lpm); + } +} + +void mfp_config(unsigned long *mfp_cfgs, int num) +{ + int i; + + for (i = 0; i < num; i++, mfp_cfgs++) { + unsigned long tmp, c = *mfp_cfgs; + struct mfp_pin *p; + int pin, af, drv, lpm, edge, pull; + + pin = MFP_PIN(c); + BUG_ON(pin >= MFP_PIN_MAX); + p = &mfp_table[pin]; + + af = MFP_AF(c); + drv = MFP_DS(c); + lpm = MFP_LPM_STATE(c); + edge = MFP_LPM_EDGE(c); + pull = MFP_PULL(c); + + /* run-mode pull settings will conflict with MFPR bits of + * low power mode state, calculate mfpr_run and mfpr_lpm + * individually if pull != MFP_PULL_NONE + */ + tmp = MFPR_AF_SEL(af) | MFPR_DRIVE(drv); + + if (likely(pull == MFP_PULL_NONE)) { + p->mfpr_run = tmp | mfpr_lpm[lpm] | mfpr_edge[edge]; + p->mfpr_lpm = p->mfpr_run; + } else { + p->mfpr_lpm = tmp | mfpr_lpm[lpm] | mfpr_edge[edge]; + p->mfpr_run = tmp | mfpr_pull[pull]; + } + + p->config = c; __mfp_config_run(p); + } + + mfpr_sync(); +} + +unsigned long mfp_read(int mfp) +{ + unsigned long val; + + BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX); + + val = mfpr_readl(mfp_table[mfp].mfpr_off); + return val; +} + +void mfp_write(int mfp, unsigned long val) +{ + BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX); + + mfpr_writel(mfp_table[mfp].mfpr_off, val); + mfpr_sync(); +} + +void __init mfp_init_base(void __iomem *mfpr_base) +{ + int i; + + /* initialize the table with default - unconfigured */ + for (i = 0; i < ARRAY_SIZE(mfp_table); i++) + mfp_table[i].config = -1; + + mfpr_mmio_base = mfpr_base; +} + +void __init mfp_init_addr(struct mfp_addr_map *map) +{ + struct mfp_addr_map *p; + unsigned long offset; + int i; + + /* mfp offset for readback */ + mfpr_off_readback = map[0].offset; + + for (p = map; p->start != MFP_PIN_INVALID; p++) { + offset = p->offset; + i = p->start; + + do { + mfp_table[i].mfpr_off = offset; + mfp_table[i].mfpr_run = 0; + mfp_table[i].mfpr_lpm = 0; + offset += 4; i++; + } while ((i <= p->end) && (p->end != -1)); + } +} + +void mfp_config_lpm(void) +{ + struct mfp_pin *p = &mfp_table[0]; + int pin; + + for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++, p++) + __mfp_config_lpm(p); +} + +void mfp_config_run(void) +{ + struct mfp_pin *p = &mfp_table[0]; + int pin; + + for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++, p++) + __mfp_config_run(p); +} + +static struct mfp_addr_map pxa300_mfp_addr_map[] __initdata = { + + MFP_ADDR_X(GPIO0, GPIO2, 0x00b4), + MFP_ADDR_X(GPIO3, GPIO26, 0x027c), + MFP_ADDR_X(GPIO27, GPIO98, 0x0400), + MFP_ADDR_X(GPIO99, GPIO127, 0x0600), + MFP_ADDR_X(GPIO0_2, GPIO1_2, 0x0674), + MFP_ADDR_X(GPIO2_2, GPIO6_2, 0x02dc), + + MFP_ADDR(nBE0, 0x0204), + MFP_ADDR(nBE1, 0x0208), + + MFP_ADDR(nLUA, 0x0244), + MFP_ADDR(nLLA, 0x0254), + + MFP_ADDR(DF_CLE_nOE, 0x0240), + MFP_ADDR(DF_nRE_nOE, 0x0200), + MFP_ADDR(DF_ALE_nWE, 0x020C), + MFP_ADDR(DF_INT_RnB, 0x00C8), + MFP_ADDR(DF_nCS0, 0x0248), + MFP_ADDR(DF_nCS1, 0x0278), + MFP_ADDR(DF_nWE, 0x00CC), + + MFP_ADDR(DF_ADDR0, 0x0210), + MFP_ADDR(DF_ADDR1, 0x0214), + MFP_ADDR(DF_ADDR2, 0x0218), + MFP_ADDR(DF_ADDR3, 0x021C), + + MFP_ADDR(DF_IO0, 0x0220), + MFP_ADDR(DF_IO1, 0x0228), + MFP_ADDR(DF_IO2, 0x0230), + MFP_ADDR(DF_IO3, 0x0238), + MFP_ADDR(DF_IO4, 0x0258), + MFP_ADDR(DF_IO5, 0x0260), + MFP_ADDR(DF_IO6, 0x0268), + MFP_ADDR(DF_IO7, 0x0270), + MFP_ADDR(DF_IO8, 0x0224), + MFP_ADDR(DF_IO9, 0x022C), + MFP_ADDR(DF_IO10, 0x0234), + MFP_ADDR(DF_IO11, 0x023C), + MFP_ADDR(DF_IO12, 0x025C), + MFP_ADDR(DF_IO13, 0x0264), + MFP_ADDR(DF_IO14, 0x026C), + MFP_ADDR(DF_IO15, 0x0274), + + MFP_ADDR_END, +}; + +/* override pxa300 MFP register addresses */ +static struct mfp_addr_map pxa310_mfp_addr_map[] __initdata = { + MFP_ADDR_X(GPIO30, GPIO98, 0x0418), + MFP_ADDR_X(GPIO7_2, GPIO12_2, 0x052C), + + MFP_ADDR(ULPI_STP, 0x040C), + MFP_ADDR(ULPI_NXT, 0x0410), + MFP_ADDR(ULPI_DIR, 0x0414), + + MFP_ADDR_END, +}; + +void mfp_init(void) +{ + mfp_init_base((void __iomem *)MFPR_BASE); + mfp_init_addr(pxa300_mfp_addr_map); + if (cpu_is_pxa310()) + mfp_init_addr(pxa310_mfp_addr_map); +} diff --git a/arch/arm/mach-pxa/reset_source.c b/arch/arm/mach-pxa/reset_source.c index a90584b..0730e02 100644 --- a/arch/arm/mach-pxa/reset_source.c +++ b/arch/arm/mach-pxa/reset_source.c @@ -15,8 +15,10 @@ #include #include #include +#include #include +#ifdef CONFIG_ARCH_PXA2XX static int pxa_detect_reset_source(void) { u32 reg = RCSR; @@ -38,4 +40,38 @@ static int pxa_detect_reset_source(void) return 0; } +void pxa_reset_reset_source(void) +{ + RCSR = RCSR_GPR | RCSR_SMR | RCSR_WDR | RCSR_HWR; +} +#endif + +#ifdef CONFIG_ARCH_PXA3XX +static int pxa_detect_reset_source(void) +{ + u32 reg = ARSR; + + /* + * Order is important, as many bits can be set together + */ + if (reg & ARSR_GPR) + reset_source_set(RESET_RST); + else if (reg & ARSR_WDT) + reset_source_set(RESET_WDG); + else if (reg & ARSR_HWR) + reset_source_set(RESET_POR); + else if (reg & ARSR_LPMR) + reset_source_set(RESET_WKE); + else + reset_source_set(RESET_UKWN); + + return 0; +} + +void pxa_clear_reset_source(void) +{ + ARSR = ARSR_GPR | ARSR_LPMR | ARSR_WDT | ARSR_HWR; +} +#endif + device_initcall(pxa_detect_reset_source); diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S index 881033d..9acd38d 100644 --- a/arch/arm/mach-pxa/sleep.S +++ b/arch/arm/mach-pxa/sleep.S @@ -79,3 +79,12 @@ pxa_cpu_do_suspend: @ enter sleep mode mcr p14, 0, r1, c7, c0, 0 @ PWRMODE 20: b 20b @ loop waiting for sleep + +#if (defined CONFIG_ARCH_PXA3XX) + /* + * pxa3xx_finish_suspend() - forces CPU into sleep state + */ +ENTRY(pxa3xx_suspend) + mcr p14, 0, r0, c7, c0, 0 @ enter sleep +20: b 20b @ waiting for sleep +#endif /* CONFIG_PXA3xx */ diff --git a/arch/arm/mach-pxa/speed-pxa3xx.c b/arch/arm/mach-pxa/speed-pxa3xx.c new file mode 100644 index 0000000..6a08ea7 --- /dev/null +++ b/arch/arm/mach-pxa/speed-pxa3xx.c @@ -0,0 +1,33 @@ +/* + * clock.h - implementation of the PXA clock functions + * + * Copyright (C) 2014 by Robert Jarzmik + * + * This file is released under the GPLv2 + * + */ + +#include +#include +#include + +/* Crystal clock: 13MHz */ +#define BASE_CLK 13000000 + +unsigned long pxa_get_uartclk(void) +{ + return 14857000; +} + +unsigned long pxa_get_pwmclk(void) +{ + return BASE_CLK; +} + +unsigned long pxa_get_nandclk(void) +{ + if (cpu_is_pxa320()) + return 104000000; + else + return 156000000; +} -- 2.1.0 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox