From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 2/6] raspberry-pi: add leds support
Date: Tue, 13 Jan 2015 07:26:12 +0100 [thread overview]
Message-ID: <1421130376-32428-2-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <1421130376-32428-1-git-send-email-plagnioj@jcrosoft.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
arch/arm/boards/raspberry-pi/rpi.c | 55 ++++++++++++++++++++++++++++++++++++++
1 file changed, 55 insertions(+)
diff --git a/arch/arm/boards/raspberry-pi/rpi.c b/arch/arm/boards/raspberry-pi/rpi.c
index ae1e92a..7d866cc 100644
--- a/arch/arm/boards/raspberry-pi/rpi.c
+++ b/arch/arm/boards/raspberry-pi/rpi.c
@@ -21,6 +21,8 @@
#include <linux/clkdev.h>
#include <envfs.h>
#include <malloc.h>
+#include <gpio.h>
+#include <led.h>
#include <asm/armlinux.h>
#include <generated/mach-types.h>
@@ -87,6 +89,49 @@ static int rpi_register_clkdev(u32 clock_id, const char *name)
}
+static struct gpio_led leds[] = {
+ {
+ .gpio = -EINVAL,
+ .led = {
+ .name = "ACT",
+ },
+ }, {
+ .gpio = -EINVAL,
+ .led = {
+ .name = "PWR",
+ },
+ },
+};
+
+static void rpi_add_led(void)
+{
+ int i;
+ struct gpio_led *l;
+
+ for (i = 0; i < ARRAY_SIZE(leds); i++) {
+ l = &leds[i];
+
+ if (gpio_is_valid(l->gpio))
+ led_gpio_register(l);
+ }
+
+ l = &leds[0];
+ if (gpio_is_valid(l->gpio))
+ led_set_trigger(LED_TRIGGER_HEARTBEAT, &l->led);
+}
+
+static void rpi_b_plus_init(void)
+{
+ leds[0].gpio = 47;
+ leds[1].gpio = 35;
+}
+
+static void rpi_b_init(void)
+{
+ leds[0].gpio = 16;
+ leds[0].active_low = 1;
+}
+
#define RPI_MODEL(_id, _name, _init) \
[_id] = { \
.name = _name,\
@@ -160,6 +205,15 @@ unknown_rev:
barebox_set_model("RaspberryPi (BCM2835/ARM1176JZF-S)");
}
+static void rpi_model_init(void)
+{
+ rpi_set_usbethaddr();
+ if (models[rpi_board_rev].init) {
+ models[rpi_board_rev].init();
+ rpi_add_led();
+ }
+}
+
static int rpi_mem_init(void)
{
u32 size = 0;
@@ -220,6 +274,7 @@ static int rpi_env_init(void)
static int rpi_devices_init(void)
{
+ rpi_model_init();
bcm2835_register_mci();
bcm2835_register_fb();
armlinux_set_architecture(MACH_TYPE_BCM2708);
--
2.1.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2015-01-13 6:26 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-13 6:24 [PATCH 0/6] raspberry-pi: updates Jean-Christophe PLAGNIOL-VILLARD
2015-01-13 6:26 ` [PATCH 1/6] raspberry-pi: add board model detection Jean-Christophe PLAGNIOL-VILLARD
2015-01-13 6:26 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2015-01-13 7:58 ` [PATCH 2/6] raspberry-pi: add leds support Antony Pavlov
2015-01-13 8:15 ` Jean-Christophe PLAGNIOL-VILLARD
2015-01-13 10:11 ` Antony Pavlov
2015-01-14 6:26 ` Sascha Hauer
2015-01-13 6:26 ` [PATCH 3/6] amba: pl011: add support for regulator Jean-Christophe PLAGNIOL-VILLARD
2015-01-13 6:26 ` [PATCH 4/6] driver: add postcore_platform_driver Jean-Christophe PLAGNIOL-VILLARD
2015-01-13 6:26 ` [PATCH 5/6] regulator: allow to use it with non DT device Jean-Christophe PLAGNIOL-VILLARD
2015-01-13 6:26 ` [PATCH 6/6] regulator: add bcm2835 driver Jean-Christophe PLAGNIOL-VILLARD
2015-01-13 6:31 [PATCH 0/6 v2] raspberry-pi: updates Jean-Christophe PLAGNIOL-VILLARD
2015-01-13 6:33 ` [PATCH 1/6] raspberry-pi: add board model detection Jean-Christophe PLAGNIOL-VILLARD
2015-01-13 6:33 ` [PATCH 2/6] raspberry-pi: add leds support Jean-Christophe PLAGNIOL-VILLARD
2015-01-18 22:08 ` Antony Pavlov
2015-01-19 7:51 ` Sascha Hauer
2015-01-19 7:58 ` Antony Pavlov
2015-01-19 7:59 ` Sascha Hauer
2015-01-19 12:16 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1421130376-32428-2-git-send-email-plagnioj@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox