[PATCH 1/2] ARM: dts: am335x-phytec-phycore-som: Add USB host support

[PATCH 1/2] ARM: dts: am335x-phytec-phycore-som: Add USB host support

[Wadim Egorov]

Add USB host support for all phycore-som based boards.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
---
 arch/arm/dts/am335x-phytec-phycore-som.dtsi | 30 +++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm/dts/am335x-phytec-phycore-som.dtsi b/arch/arm/dts/am335x-phytec-phycore-som.dtsi
index c34ae38..7d0e3c5 100644
--- a/arch/arm/dts/am335x-phytec-phycore-som.dtsi
+++ b/arch/arm/dts/am335x-phytec-phycore-som.dtsi
@@ -17,6 +17,13 @@
 };
 
 &am33xx_pinmux {
+	usb_pins: pinmux_usb_pins {
+		pinctrl-single,pins = <
+			0x21c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
+			0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */
+		>;
+	};
+
 	i2c0_pins: pinmux_i2c0_pins {
 			pinctrl-single,pins = <
 			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c0_sda.i2c0_sda */
@@ -106,6 +113,29 @@
 	};
 };
 
+&cppi41dma {
+        status = "okay";
+};
+
+&usb_ctrl_mod {
+        status = "okay";
+};
+
+&usb {
+        pinctrl-names = "default";
+        pinctrl-0 = <&usb_pins>;
+        status = "okay";
+};
+
+&usb1 {
+        status = "okay";
+        dr_mode = "host";
+};
+
+&usb1_phy {
+        status = "okay";
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
-- 
1.9.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 2/2] ARM: dts: am335x-phytec-phyflex: Add USB host support

[Wadim Egorov]

Add USB host support for the phyflex-som.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
---
 arch/arm/dts/am335x-phytec-phyflex.dts | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm/dts/am335x-phytec-phyflex.dts b/arch/arm/dts/am335x-phytec-phyflex.dts
index 6c49567..5459cd2 100644
--- a/arch/arm/dts/am335x-phytec-phyflex.dts
+++ b/arch/arm/dts/am335x-phytec-phyflex.dts
@@ -39,6 +39,13 @@
 };
 
 &am33xx_pinmux {
+	usb_pins: pinmux_usb {
+		pinctrl-single,pins = <
+			0x21c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
+			0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */
+		>;
+	};
+
 	i2c0_pins: pinmux_i2c0_pins {
 			pinctrl-single,pins = <
 			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c0_sda */
@@ -129,6 +136,30 @@
 	};
 };
 
+&cppi41dma {
+        status = "okay";
+};
+
+
+&usb_ctrl_mod {
+        status = "okay";
+};
+
+&usb {
+        pinctrl-names = "default";
+        pinctrl-0 = <&usb_pins>;
+        status = "okay";
+};
+
+&usb1 {
+        dr_mode = "host";
+        status = "okay";
+};
+
+&usb1_phy {
+        status = "okay";
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
-- 
1.9.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH 1/2] ARM: dts: am335x-phytec-phycore-som: Add USB host support

[Sascha Hauer]

On Mon, Jan 19, 2015 at 01:34:37PM +0100, Wadim Egorov wrote:
> Add USB host support for all phycore-som based boards.
> 
> Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
> ---
>  arch/arm/dts/am335x-phytec-phycore-som.dtsi | 30 +++++++++++++++++++++++++++++
>  1 file changed, 30 insertions(+)

Applied, thanks.

I assume this has been tested on Linux aswell, right?

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH 1/2] ARM: dts: am335x-phytec-phycore-som: Add USB host support

[Wadim Egorov]

Yes, I have tested this on Linux (3.12).
On 20.01.2015 08:00, Sascha Hauer wrote:
> On Mon, Jan 19, 2015 at 01:34:37PM +0100, Wadim Egorov wrote:
>> Add USB host support for all phycore-som based boards.
>>
>> Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
>> ---
>>   arch/arm/dts/am335x-phytec-phycore-som.dtsi | 30 +++++++++++++++++++++++++++++
>>   1 file changed, 30 insertions(+)
> Applied, thanks.
>
> I assume this has been tested on Linux aswell, right?
>
> Sascha
>


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox