A little bit fixing and extending the existing documentation

A little bit fixing and extending the existing documentation

[Juergen Borleis]

Just some minor changes...

jbe


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 1/9] Docs: just fix a typo

[Juergen Borleis]

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
 Documentation/boards/imx.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/boards/imx.rst b/Documentation/boards/imx.rst
index 0fde3e7..21ea825 100644
--- a/Documentation/boards/imx.rst
+++ b/Documentation/boards/imx.rst
@@ -91,7 +91,7 @@ command for writing to NAND flash.
 i.MX boards
 -----------
 
-Not supported all boards have a description here. Many newer boards also do
+Not all supported boards have a description here. Many newer boards also do
 not have individual defconfig files, they are covered by ``imx_v7_defconfig``
 or ``imx_defconfig`` instead.
 
-- 
2.1.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 2/9] Docs: just mark the 'bootm' command like the 'go' command as well

[Juergen Borleis]

Just a try to be consistent in one sentence.

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
 Documentation/boards/mxs.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/boards/mxs.rst b/Documentation/boards/mxs.rst
index 6c8bdb5..879663c 100644
--- a/Documentation/boards/mxs.rst
+++ b/Documentation/boards/mxs.rst
@@ -115,5 +115,5 @@ mxsboot tool which changes this sector number in the image.
 Booting second stage
 --------------------
 
-The second stage images can be started with the barebox bootm command or
+The second stage images can be started with the barebox 'bootm' command or
 just jumped into using the 'go' command.
-- 
2.1.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 3/9] Docs: add some info about the Ka-Ro TX25 related bootloader images

[Juergen Borleis]

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
 Documentation/boards/imx/Karo-TX25.rst | 10 ++++++++++
 1 file changed, 10 insertions(+)
 create mode 100644 Documentation/boards/imx/Karo-TX25.rst

diff --git a/Documentation/boards/imx/Karo-TX25.rst b/Documentation/boards/imx/Karo-TX25.rst
new file mode 100644
index 0000000..756c99d
--- /dev/null
+++ b/Documentation/boards/imx/Karo-TX25.rst
@@ -0,0 +1,10 @@
+Ka-Ro TX25
+==========
+
+Building the bootloader image for this target is covered by the ``imx_defconfig``
+multiimage configuration if the ``System Type`` menu entry ``Ka-Ro TX25``
+is enabled.
+
+Use the corresponding ``barebox-karo-tx25.img`` for external NAND boot.
+Use the corresponding ``barebox-karo-tx25-internal.img`` for internal NAND, USB
+or SD card boot.
-- 
2.1.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 4/9] Docs: add some info about the Phytec's phyCORE27 and phyCARD27 related bootloader images

[Juergen Borleis]

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
 Documentation/boards/imx/Phytec-phyCARD-i.MX27.rst | 8 ++++++++
 Documentation/boards/imx/Phytec-phyCORE-i.MX27.rst | 8 ++++++++
 2 files changed, 16 insertions(+)
 create mode 100644 Documentation/boards/imx/Phytec-phyCARD-i.MX27.rst
 create mode 100644 Documentation/boards/imx/Phytec-phyCORE-i.MX27.rst

diff --git a/Documentation/boards/imx/Phytec-phyCARD-i.MX27.rst b/Documentation/boards/imx/Phytec-phyCARD-i.MX27.rst
new file mode 100644
index 0000000..d5d3837
--- /dev/null
+++ b/Documentation/boards/imx/Phytec-phyCARD-i.MX27.rst
@@ -0,0 +1,8 @@
+Phytec phyCARD-i.MX27
+=====================
+
+Building the bootloader image for this target is covered by the ``imx_defconfig``
+multiimage configuration if the ``System Type`` menu entry ``phyCard-i.MX27``
+is enabled.
+
+Use the corresponding ``barebox-phytec-phycard-imx27.img`` file for this target.
diff --git a/Documentation/boards/imx/Phytec-phyCORE-i.MX27.rst b/Documentation/boards/imx/Phytec-phyCORE-i.MX27.rst
new file mode 100644
index 0000000..4b40be7
--- /dev/null
+++ b/Documentation/boards/imx/Phytec-phyCORE-i.MX27.rst
@@ -0,0 +1,8 @@
+Phytec phyCORE-i.MX27
+=====================
+
+Building the bootloader image for this target is covered by the ``imx_defconfig``
+multiimage configuration if the ``System Type`` menu entry ``phyCORE-i.MX27``
+is enabled.
+
+Use the corresponding ``barebox-phytec-phycore-imx27.img`` file for this target.
-- 
2.1.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 5/9] Docs: extend the mentioned commands with a link to their documentation

[Juergen Borleis]

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
 Documentation/boards/mxs.rst | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/boards/mxs.rst b/Documentation/boards/mxs.rst
index 879663c..1c26826 100644
--- a/Documentation/boards/mxs.rst
+++ b/Documentation/boards/mxs.rst
@@ -115,5 +115,5 @@ mxsboot tool which changes this sector number in the image.
 Booting second stage
 --------------------
 
-The second stage images can be started with the barebox 'bootm' command or
-just jumped into using the 'go' command.
+The second stage images can be started with the barebox :ref:`command_bootm` command or
+just jumped into using the :ref:`command_go` command.
-- 
2.1.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 6/9] Docs: move the individual MXS target documentation where they belong to

[Juergen Borleis]

i.MX and MXS differs in their global documentation. Honor this.

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
 Documentation/boards/imx.rst |  1 -
 Documentation/boards/mxs.rst | 12 ++++++++++++
 2 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/Documentation/boards/imx.rst b/Documentation/boards/imx.rst
index 21ea825..466f69c 100644
--- a/Documentation/boards/imx.rst
+++ b/Documentation/boards/imx.rst
@@ -101,4 +101,3 @@ or ``imx_defconfig`` instead.
   :maxdepth: 1
 
   imx/*
-  mxs/*
diff --git a/Documentation/boards/mxs.rst b/Documentation/boards/mxs.rst
index 1c26826..cfcd4c7 100644
--- a/Documentation/boards/mxs.rst
+++ b/Documentation/boards/mxs.rst
@@ -117,3 +117,15 @@ Booting second stage
 
 The second stage images can be started with the barebox :ref:`command_bootm` command or
 just jumped into using the :ref:`command_go` command.
+
+i.MXs boards
+------------
+
+Not all supported boards have a description here.
+
+.. toctree::
+  :glob:
+  :numbered:
+  :maxdepth: 1
+
+  mxs/*
-- 
2.1.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 7/9] Docs: the name of the default config file for the FSL i.MX23 evk has changed

[Juergen Borleis]

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
 Documentation/boards/mxs/Freescale-i.MX23-evk.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/boards/mxs/Freescale-i.MX23-evk.rst b/Documentation/boards/mxs/Freescale-i.MX23-evk.rst
index 85dde46..cb73ec1 100644
--- a/Documentation/boards/mxs/Freescale-i.MX23-evk.rst
+++ b/Documentation/boards/mxs/Freescale-i.MX23-evk.rst
@@ -21,7 +21,7 @@ How to get the bootloader binary image
 
 Using the default configuration::
 
-  make ARCH=arm imx23evk_defconfig
+  make ARCH=arm freescale-mx23-evk_defconfig
 
 Build the bootloader binary image::
 
-- 
2.1.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 8/9] Docs: extend the mentioned commands with a link to their documentation

[Juergen Borleis]

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
 Documentation/boards/mxs/KaRo-TX28.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/boards/mxs/KaRo-TX28.rst b/Documentation/boards/mxs/KaRo-TX28.rst
index 0c5dc71..6cad5eb 100644
--- a/Documentation/boards/mxs/KaRo-TX28.rst
+++ b/Documentation/boards/mxs/KaRo-TX28.rst
@@ -38,5 +38,5 @@ This produces the following images:
 
  * barebox-karo-tx28-bootstream.img - Use with the bcb command
  * barebox-karo-tx28-sd.img - Use for SD cards
- * barebox-karo-tx28-2nd.img - Use for 2nd stage booting (with bootm)
+ * barebox-karo-tx28-2nd.img - Use for 2nd stage booting (with :ref:`command_bootm`)
 
-- 
2.1.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 9/9] Docs: add some info about the Olimex's Olinuxino related bootloader images

[Juergen Borleis]

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
 Documentation/boards/mxs/Olimex-olinuxino.rst | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)
 create mode 100644 Documentation/boards/mxs/Olimex-olinuxino.rst

diff --git a/Documentation/boards/mxs/Olimex-olinuxino.rst b/Documentation/boards/mxs/Olimex-olinuxino.rst
new file mode 100644
index 0000000..a06eb33
--- /dev/null
+++ b/Documentation/boards/mxs/Olimex-olinuxino.rst
@@ -0,0 +1,26 @@
+Olimex LTD Olinuxino
+====================
+
+The CPU module
+--------------
+
+This CPU module is based on a Freescale i.MX23 CPU.
+
+How to get the bootloader binary image
+--------------------------------------
+
+Using the default configuration::
+
+  make ARCH=arm imx233-olinuxino_defconfig
+
+Build the binary image::
+
+  make ARCH=arm CROSS_COMPILE=armv5compiler
+
+**NOTE:** replace the armv5compiler with your ARM v5 cross compiler.
+
+This produces the following images:
+
+ * barebox-olinuxino-imx23-bootstream.img - Use with the bcb command
+ * barebox-olinuxino-imx23-sd.img - Use for SD cards
+ * barebox-olinuxino-imx23-2nd.img - Use for 2nd stage booting (with :ref:`command_bootm`)
-- 
2.1.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH 2/9] Docs: just mark the 'bootm' command like the 'go' command as well

[Lucas Stach]

Am Montag, den 26.01.2015, 11:39 +0100 schrieb Juergen Borleis:
> Just a try to be consistent in one sentence.
> 
> Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
> ---
>  Documentation/boards/mxs.rst | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/boards/mxs.rst b/Documentation/boards/mxs.rst
> index 6c8bdb5..879663c 100644
> --- a/Documentation/boards/mxs.rst
> +++ b/Documentation/boards/mxs.rst
> @@ -115,5 +115,5 @@ mxsboot tool which changes this sector number in the image.
>  Booting second stage
>  --------------------
>  
> -The second stage images can be started with the barebox bootm command or
> +The second stage images can be started with the barebox 'bootm' command or
>  just jumped into using the 'go' command.

Wouldn't it be better to directly link to those commands by
using :ref:`command_bootm` (same for go), like in other parts of the
documentation?

Regards,
Lucas


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH 2/9] Docs: just mark the 'bootm' command like the 'go' command as well

[Lucas Stach]

Am Montag, den 26.01.2015, 11:46 +0100 schrieb Lucas Stach:
> Am Montag, den 26.01.2015, 11:39 +0100 schrieb Juergen Borleis:
> > Just a try to be consistent in one sentence.
> > 
> > Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
> > ---
> >  Documentation/boards/mxs.rst | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/Documentation/boards/mxs.rst b/Documentation/boards/mxs.rst
> > index 6c8bdb5..879663c 100644
> > --- a/Documentation/boards/mxs.rst
> > +++ b/Documentation/boards/mxs.rst
> > @@ -115,5 +115,5 @@ mxsboot tool which changes this sector number in the image.
> >  Booting second stage
> >  --------------------
> >  
> > -The second stage images can be started with the barebox bootm command or
> > +The second stage images can be started with the barebox 'bootm' command or
> >  just jumped into using the 'go' command.
> 
> Wouldn't it be better to directly link to those commands by
> using :ref:`command_bootm` (same for go), like in other parts of the
> documentation?
> 
And I just noticed you do exactly that in Patch 5/9.



_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: A little bit fixing and extending the existing documentation

[Sascha Hauer]

On Mon, Jan 26, 2015 at 11:39:47AM +0100, Juergen Borleis wrote:
> Just some minor changes...

Thanks. Applied all but the second patch.

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox