From: Stefan Christ <s.christ@phytec.de>
To: barebox@lists.infradead.org
Subject: [PATCH] ARM: i.MX6: Fix bad block marker in imx6-bbu-nand handler
Date: Tue, 27 Jan 2015 14:14:59 +0100 [thread overview]
Message-ID: <1422364499-31437-1-git-send-email-s.christ@phytec.de> (raw)
The i.MX6 NAND update handler sets all bytes of OOB data to 0x00 in pages that
contain the FCB structure currently. So the first and second byte which is
used as the manufacturers bad block marker is in the 'bad block' state. A scan
for factory bad blocks will detect these blocks as bad while they are still ok.
The barebox issues a scan for factory bad blocks to rebuild the bad block table
if the NAND is brand new or the last four blocks of flash are erased.
To fix this problem set the first two bytes of OOB data to 0xFF explicitly.
There is a potential chance that the bbu handler will mark a real bad block as
factory good. That's not a problem for the ROM Loader, because the FCB is
protected by a checksum and the hamming_13_8 encoding. Additionally the current
implementation of the bbu handler does not check the bad block table or the
factory bad block marker before writing the FCB at the first page of the first
and second block.
Signed-off-by: Stefan Christ <s.christ@phytec.de>
---
arch/arm/mach-imx/imx6-bbu-nand.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/mach-imx/imx6-bbu-nand.c b/arch/arm/mach-imx/imx6-bbu-nand.c
index fb7224c..063558b 100644
--- a/arch/arm/mach-imx/imx6-bbu-nand.c
+++ b/arch/arm/mach-imx/imx6-bbu-nand.c
@@ -421,6 +421,16 @@ static int imx6_bbu_nand_update(struct bbu_handler *handler, struct bbu_data *da
fcb_create(fcb, mtd);
encode_hamming_13_8(fcb, ecc, 512);
+
+ /*
+ * Set the first and second byte of OOB data to 0xFF, not 0x00. These
+ * bytes are used as the Manufacturers Bad Block Marker (MBBM). Since
+ * the FCB is mostly written to the first page in a block, a scan for
+ * factory bad blocks will detect these blocks as bad, e.g. when
+ * function nand_scan_bbt() is executed to build a new bad block table.
+ */
+ memset(fcb_raw_page + mtd->writesize, 0xFF, 2);
+
ret = raw_write_page(mtd, fcb_raw_page, 0);
if (ret)
goto out;
--
1.9.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2015-01-27 13:16 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-27 13:14 Stefan Christ [this message]
2015-01-28 9:14 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1422364499-31437-1-git-send-email-s.christ@phytec.de \
--to=s.christ@phytec.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox