From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH] MXS: Add device tree support and duckbill board support
Date: Wed, 28 Jan 2015 08:32:04 +0100 [thread overview]
Message-ID: <1422430339-11969-1-git-send-email-s.hauer@pengutronix.de> (raw)
This series adds device tree support for MXS:
- Add device tree support for MXS specific drivers (debug UART, SD/MMC,
OCOTP)
- Make sure SoC platform_devices are not registered when a device tree
is present
- Add a pinctrl driver for MXS
- Turn GPIO support into a driver to make GPIO bindings via device tree
possible
As a first user for the device tree support the I2SE duckbill board
is added.
Sascha
----------------------------------------------------------------
Sascha Hauer (15):
ARM: MXS: Fix vddd brownout setting
MXS: power-init: inline only once used functions
ARM: MXS: Do not register devices with device tree support
ARM: MXS: Make gpio a driver
mci: mxs: Add devicetree support
serial: stm_serial: Add devicetree support
ARM: MXS: Create ocotp device in SoC code
ARM: MXS: ocotp: Add devicetree support
of: Create platform_device when creating AMBA device failed
pbl: Add support for memory_display
pinctrl: Add MXS pinctrl driver
ARM: MXS: Setup vdda in power prep
ARM: MXS: Add regulator debug print
ARM: MXS: power-init: Add parameters to mx28_power_init()
ARM: MXS: Add duckbill board support
arch/arm/Kconfig | 1 +
arch/arm/boards/Makefile | 1 +
arch/arm/boards/crystalfontz-cfa10036/cfa10036.c | 3 -
arch/arm/boards/duckbill/Makefile | 2 +
arch/arm/boards/duckbill/board.c | 82 +++++++
arch/arm/boards/duckbill/lowlevel.c | 73 ++++++
arch/arm/boards/freescale-mx28-evk/lowlevel.c | 2 +-
arch/arm/boards/freescale-mx28-evk/mx28-evk.c | 2 -
arch/arm/boards/karo-tx28/lowlevel.c | 2 +-
arch/arm/boards/karo-tx28/tx28-stk5.c | 3 -
arch/arm/configs/duckbill_defconfig | 100 ++++++++
arch/arm/dts/Makefile | 1 +
arch/arm/dts/imx28-duckbill.dts | 15 ++
arch/arm/mach-mxs/Kconfig | 8 +
arch/arm/mach-mxs/include/mach/init.h | 8 +-
arch/arm/mach-mxs/iomux-imx.c | 60 -----
arch/arm/mach-mxs/mem-init.c | 15 --
arch/arm/mach-mxs/ocotp.c | 9 +
arch/arm/mach-mxs/power-init.c | 277 +++++++++++++----------
arch/arm/mach-mxs/soc-imx23.c | 6 +
arch/arm/mach-mxs/soc-imx28.c | 9 +
common/Makefile | 1 +
drivers/gpio/Kconfig | 3 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-mxs.c | 186 +++++++++++++++
drivers/mci/mxs.c | 50 ++--
drivers/of/platform.c | 4 +-
drivers/pinctrl/Kconfig | 7 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-mxs.c | 171 ++++++++++++++
drivers/serial/stm-serial.c | 9 +
images/Makefile.mxs | 10 +
pbl/console.c | 10 +
33 files changed, 899 insertions(+), 233 deletions(-)
create mode 100644 arch/arm/boards/duckbill/Makefile
create mode 100644 arch/arm/boards/duckbill/board.c
create mode 100644 arch/arm/boards/duckbill/lowlevel.c
create mode 100644 arch/arm/configs/duckbill_defconfig
create mode 100644 arch/arm/dts/imx28-duckbill.dts
create mode 100644 drivers/gpio/gpio-mxs.c
create mode 100644 drivers/pinctrl/pinctrl-mxs.c
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2015-01-28 7:32 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-28 7:32 Sascha Hauer [this message]
2015-01-28 7:32 ` [PATCH 01/15] ARM: MXS: Fix vddd brownout setting Sascha Hauer
2015-01-28 7:32 ` [PATCH 02/15] MXS: power-init: inline only once used functions Sascha Hauer
2015-01-28 7:32 ` [PATCH 03/15] ARM: MXS: Do not register devices with device tree support Sascha Hauer
2015-01-28 7:32 ` [PATCH 04/15] ARM: MXS: Make gpio a driver Sascha Hauer
2015-01-28 7:32 ` [PATCH 05/15] mci: mxs: Add devicetree support Sascha Hauer
2015-01-28 7:32 ` [PATCH 06/15] serial: stm_serial: " Sascha Hauer
2015-01-28 7:32 ` [PATCH 07/15] ARM: MXS: Create ocotp device in SoC code Sascha Hauer
2015-01-28 7:32 ` [PATCH 08/15] ARM: MXS: ocotp: Add devicetree support Sascha Hauer
2015-01-28 7:32 ` [PATCH 09/15] of: Create platform_device when creating AMBA device failed Sascha Hauer
2015-01-28 7:32 ` [PATCH 10/15] pbl: Add support for memory_display Sascha Hauer
2015-01-28 7:32 ` [PATCH 11/15] pinctrl: Add MXS pinctrl driver Sascha Hauer
2015-01-28 7:32 ` [PATCH 12/15] ARM: MXS: Setup vdda in power prep Sascha Hauer
2015-01-28 7:32 ` [PATCH 13/15] ARM: MXS: Add regulator debug print Sascha Hauer
2015-01-28 7:32 ` [PATCH 14/15] ARM: MXS: power-init: Add parameters to mx28_power_init() Sascha Hauer
2015-01-28 7:32 ` [PATCH 15/15] ARM: MXS: Add duckbill board support Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1422430339-11969-1-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox