From: Andrey Panov <rockford@yandex.ru>
To: barebox@lists.infradead.org
Subject: [PATCH v2 15/18] ARM: Rockchip: Use newer DTS for Radxa Rock board
Date: Wed, 4 Mar 2015 23:11:43 +0300 [thread overview]
Message-ID: <1425499906-32125-16-git-send-email-rockford@yandex.ru> (raw)
In-Reply-To: <1425499906-32125-1-git-send-email-rockford@yandex.ru>
Signed-off-by: Andrey Panov <rockford@yandex.ru>
---
arch/arm/dts/rk3188-clocks.dtsi | 289 -----------------------------------
arch/arm/dts/rk3188-radxarock.dts | 32 ++--
arch/arm/dts/rk3188.dtsi | 306 --------------------------------------
arch/arm/dts/rk3xxx.dtsi | 139 -----------------
4 files changed, 20 insertions(+), 746 deletions(-)
delete mode 100644 arch/arm/dts/rk3188-clocks.dtsi
delete mode 100644 arch/arm/dts/rk3188.dtsi
delete mode 100644 arch/arm/dts/rk3xxx.dtsi
diff --git a/arch/arm/dts/rk3188-clocks.dtsi b/arch/arm/dts/rk3188-clocks.dtsi
deleted file mode 100644
index b1b92dc..0000000
--- a/arch/arm/dts/rk3188-clocks.dtsi
+++ /dev/null
@@ -1,289 +0,0 @@
-/*
- * Copyright (c) 2013 MundoReader S.L.
- * Author: Heiko Stuebner <heiko@sntech.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/ {
- clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- /*
- * This is a dummy clock, to be used as placeholder on
- * other mux clocks when a specific parent clock is not
- * yet implemented. It should be dropped when the driver
- * is complete.
- */
- dummy: dummy {
- compatible = "fixed-clock";
- clock-frequency = <0>;
- #clock-cells = <0>;
- };
-
- xin24m: xin24m {
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- #clock-cells = <0>;
- };
-
- dummy48m: dummy48m {
- compatible = "fixed-clock";
- clock-frequency = <48000000>;
- #clock-cells = <0>;
- };
-
- dummy150m: dummy150m {
- compatible = "fixed-clock";
- clock-frequency = <150000000>;
- #clock-cells = <0>;
- };
-
- clk_gates0: gate-clk@200000d0 {
- compatible = "rockchip,rk2928-gate-clk";
- reg = <0x200000d0 0x4>;
- clocks = <&dummy150m>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>;
-
- clock-output-names =
- "gate_core_periph", "gate_cpu_gpll",
- "gate_ddrphy", "gate_aclk_cpu",
- "gate_hclk_cpu", "gate_pclk_cpu",
- "gate_atclk_cpu", "gate_aclk_core",
- "reserved", "gate_i2s0",
- "gate_i2s0_frac", "reserved",
- "reserved", "gate_spdif",
- "gate_spdif_frac", "gate_testclk";
-
- #clock-cells = <1>;
- };
-
- clk_gates1: gate-clk@200000d4 {
- compatible = "rockchip,rk2928-gate-clk";
- reg = <0x200000d4 0x4>;
- clocks = <&xin24m>, <&xin24m>,
- <&xin24m>, <&dummy>,
- <&dummy>, <&xin24m>,
- <&xin24m>, <&dummy>,
- <&xin24m>, <&dummy>,
- <&xin24m>, <&dummy>,
- <&xin24m>, <&dummy>,
- <&xin24m>, <&dummy>;
-
- clock-output-names =
- "gate_timer0", "gate_timer1",
- "gate_timer3", "gate_jtag",
- "gate_aclk_lcdc1_src", "gate_otgphy0",
- "gate_otgphy1", "gate_ddr_gpll",
- "gate_uart0", "gate_frac_uart0",
- "gate_uart1", "gate_frac_uart1",
- "gate_uart2", "gate_frac_uart2",
- "gate_uart3", "gate_frac_uart3";
-
- #clock-cells = <1>;
- };
-
- clk_gates2: gate-clk@200000d8 {
- compatible = "rockchip,rk2928-gate-clk";
- reg = <0x200000d8 0x4>;
- clocks = <&clk_gates2 1>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&clk_gates2 3>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy48m>,
- <&dummy>, <&dummy48m>,
- <&dummy>, <&dummy>;
-
- clock-output-names =
- "gate_periph_src", "gate_aclk_periph",
- "gate_hclk_periph", "gate_pclk_periph",
- "gate_smc", "gate_mac",
- "gate_hsadc", "gate_hsadc_frac",
- "gate_saradc", "gate_spi0",
- "gate_spi1", "gate_mmc0",
- "gate_mac_lbtest", "gate_mmc1",
- "gate_emmc", "reserved";
-
- #clock-cells = <1>;
- };
-
- clk_gates3: gate-clk@200000dc {
- compatible = "rockchip,rk2928-gate-clk";
- reg = <0x200000dc 0x4>;
- clocks = <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&xin24m>, <&xin24m>,
- <&dummy>, <&dummy>,
- <&xin24m>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&xin24m>, <&dummy>;
-
- clock-output-names =
- "gate_aclk_lcdc0_src", "gate_dclk_lcdc0",
- "gate_dclk_lcdc1", "gate_pclkin_cif0",
- "gate_timer2", "gate_timer4",
- "gate_hsicphy", "gate_cif0_out",
- "gate_timer5", "gate_aclk_vepu",
- "gate_hclk_vepu", "gate_aclk_vdpu",
- "gate_hclk_vdpu", "reserved",
- "gate_timer6", "gate_aclk_gpu_src";
-
- #clock-cells = <1>;
- };
-
- clk_gates4: gate-clk@200000e0 {
- compatible = "rockchip,rk2928-gate-clk";
- reg = <0x200000e0 0x4>;
- clocks = <&clk_gates2 2>, <&clk_gates2 3>,
- <&clk_gates2 1>, <&clk_gates2 1>,
- <&clk_gates2 1>, <&clk_gates2 2>,
- <&clk_gates2 2>, <&clk_gates2 2>,
- <&clk_gates0 4>, <&clk_gates0 4>,
- <&clk_gates0 3>, <&dummy>,
- <&clk_gates0 3>, <&dummy>,
- <&dummy>, <&dummy>;
-
- clock-output-names =
- "gate_hclk_peri_axi_matrix", "gate_pclk_peri_axi_matrix",
- "gate_aclk_cpu_peri", "gate_aclk_peri_axi_matrix",
- "gate_aclk_pei_niu", "gate_hclk_usb_peri",
- "gate_hclk_peri_ahb_arbi", "gate_hclk_emem_peri",
- "gate_hclk_cpubus", "gate_hclk_ahb2apb",
- "gate_aclk_strc_sys", "reserved",
- "gate_aclk_intmem", "reserved",
- "gate_hclk_imem1", "gate_hclk_imem0";
-
- #clock-cells = <1>;
- };
-
- clk_gates5: gate-clk@200000e4 {
- compatible = "rockchip,rk2928-gate-clk";
- reg = <0x200000e4 0x4>;
- clocks = <&clk_gates0 3>, <&clk_gates2 1>,
- <&clk_gates0 5>, <&clk_gates0 5>,
- <&clk_gates0 5>, <&clk_gates0 5>,
- <&clk_gates0 4>, <&clk_gates0 5>,
- <&clk_gates2 1>, <&clk_gates2 2>,
- <&clk_gates2 2>, <&clk_gates2 2>,
- <&clk_gates2 2>, <&clk_gates4 5>;
-
- clock-output-names =
- "gate_aclk_dmac1", "gate_aclk_dmac2",
- "gate_pclk_efuse", "gate_pclk_tzpc",
- "gate_pclk_grf", "gate_pclk_pmu",
- "gate_hclk_rom", "gate_pclk_ddrupctl",
- "gate_aclk_smc", "gate_hclk_nandc",
- "gate_hclk_mmc0", "gate_hclk_mmc1",
- "gate_hclk_emmc", "gate_hclk_otg0";
-
- #clock-cells = <1>;
- };
-
- clk_gates6: gate-clk@200000e8 {
- compatible = "rockchip,rk2928-gate-clk";
- reg = <0x200000e8 0x4>;
- clocks = <&clk_gates3 0>, <&clk_gates0 4>,
- <&clk_gates0 4>, <&clk_gates1 4>,
- <&clk_gates0 4>, <&clk_gates3 0>,
- <&dummy>, <&dummy>,
- <&clk_gates3 0>, <&clk_gates0 4>,
- <&clk_gates0 4>, <&clk_gates1 4>,
- <&clk_gates0 4>, <&clk_gates3 0>;
-
- clock-output-names =
- "gate_aclk_lcdc0", "gate_hclk_lcdc0",
- "gate_hclk_lcdc1", "gate_aclk_lcdc1",
- "gate_hclk_cif0", "gate_aclk_cif0",
- "reserved", "reserved",
- "gate_aclk_ipp", "gate_hclk_ipp",
- "gate_hclk_rga", "gate_aclk_rga",
- "gate_hclk_vio_bus", "gate_aclk_vio0";
-
- #clock-cells = <1>;
- };
-
- clk_gates7: gate-clk@200000ec {
- compatible = "rockchip,rk2928-gate-clk";
- reg = <0x200000ec 0x4>;
- clocks = <&clk_gates2 2>, <&clk_gates0 4>,
- <&clk_gates0 4>, <&dummy>,
- <&dummy>, <&clk_gates2 2>,
- <&clk_gates2 2>, <&clk_gates0 5>,
- <&dummy>, <&clk_gates0 5>,
- <&clk_gates0 5>, <&clk_gates2 3>,
- <&clk_gates2 3>, <&clk_gates2 3>,
- <&clk_gates2 3>, <&clk_gates2 3>;
-
- clock-output-names =
- "gate_hclk_emac", "gate_hclk_spdif",
- "gate_hclk_i2s0_2ch", "gate_hclk_otg1",
- "gate_hclk_hsic", "gate_hclk_hsadc",
- "gate_hclk_pidf", "gate_pclk_timer0",
- "reserved", "gate_pclk_timer2",
- "gate_pclk_pwm01", "gate_pclk_pwm23",
- "gate_pclk_spi0", "gate_pclk_spi1",
- "gate_pclk_saradc", "gate_pclk_wdt";
-
- #clock-cells = <1>;
- };
-
- clk_gates8: gate-clk@200000f0 {
- compatible = "rockchip,rk2928-gate-clk";
- reg = <0x200000f0 0x4>;
- clocks = <&clk_gates0 5>, <&clk_gates0 5>,
- <&clk_gates2 3>, <&clk_gates2 3>,
- <&clk_gates0 5>, <&clk_gates0 5>,
- <&clk_gates2 3>, <&clk_gates2 3>,
- <&clk_gates2 3>, <&clk_gates0 5>,
- <&clk_gates0 5>, <&clk_gates0 5>,
- <&clk_gates2 3>, <&dummy>;
-
- clock-output-names =
- "gate_pclk_uart0", "gate_pclk_uart1",
- "gate_pclk_uart2", "gate_pclk_uart3",
- "gate_pclk_i2c0", "gate_pclk_i2c1",
- "gate_pclk_i2c2", "gate_pclk_i2c3",
- "gate_pclk_i2c4", "gate_pclk_gpio0",
- "gate_pclk_gpio1", "gate_pclk_gpio2",
- "gate_pclk_gpio3", "gate_aclk_gps";
-
- #clock-cells = <1>;
- };
-
- clk_gates9: gate-clk@200000f4 {
- compatible = "rockchip,rk2928-gate-clk";
- reg = <0x200000f4 0x4>;
- clocks = <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>;
-
- clock-output-names =
- "gate_clk_core_dbg", "gate_pclk_dbg",
- "gate_clk_trace", "gate_atclk",
- "gate_clk_l2c", "gate_aclk_vio1",
- "gate_pclk_publ", "gate_aclk_gpu";
-
- #clock-cells = <1>;
- };
- };
-
-};
diff --git a/arch/arm/dts/rk3188-radxarock.dts b/arch/arm/dts/rk3188-radxarock.dts
index 2d49d69..47b2487 100644
--- a/arch/arm/dts/rk3188-radxarock.dts
+++ b/arch/arm/dts/rk3188-radxarock.dts
@@ -12,22 +12,30 @@
* GNU General Public License for more details.
*/
-/dts-v1/;
-#include "rk3188.dtsi"
+#include <arm/rk3188-radxarock.dts>
/ {
- model = "Radxa Rock";
- compatible = "radxa,rock", "rockchip,rk3188";
+ chosen {
+ linux,stdout-path = &uart2;
- memory {
- reg = <0x60000000 0x80000000>;
- };
-
- soc {
- uart2: serial@20064000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_xfer>;
+ environment {
+ compatible = "barebox,environment";
+ device-path = &mmc0, "partname:barebox-environment";
status = "okay";
};
};
};
+
+&mmc0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "barebox";
+ reg = <0x0 0x80000>;
+ };
+ partition@1 {
+ label = "barebox-environment";
+ reg = <0x80000 0x80000>;
+ };
+};
diff --git a/arch/arm/dts/rk3188.dtsi b/arch/arm/dts/rk3188.dtsi
deleted file mode 100644
index 277a915..0000000
--- a/arch/arm/dts/rk3188.dtsi
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * Copyright (c) 2013 MundoReader S.L.
- * Author: Heiko Stuebner <heiko@sntech.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-#include "rk3xxx.dtsi"
-#include "rk3188-clocks.dtsi"
-
-/* barebox additions */
-/ {
- soc {
- ethernet@10204000 {
- compatible = "snps,arc-emac";
- reg = <0x10204000 0x100>;
- interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <50000000>;
- max-speed = <100>;
- phy = <&phy0>;
- pinctrl-names = "default";
- pinctrl-0 = <&emac0_pins>;
-
- #address-cells = <1>;
- #size-cells = <0>;
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
- };
-
- pinctrl@20008000 {
- emac0 {
- emac0_pins: emac0-pins {
- rockchip,pins = <RK_GPIO3 16 RK_FUNC_2 &pcfg_pull_up>,
- <RK_GPIO3 17 RK_FUNC_2 &pcfg_pull_up>,
- <RK_GPIO3 18 RK_FUNC_2 &pcfg_pull_up>,
- <RK_GPIO3 19 RK_FUNC_2 &pcfg_pull_up>,
- <RK_GPIO3 20 RK_FUNC_2 &pcfg_pull_up>,
- <RK_GPIO3 21 RK_FUNC_2 &pcfg_pull_none>,
- <RK_GPIO3 22 RK_FUNC_2 &pcfg_pull_up>,
- <RK_GPIO3 23 RK_FUNC_2 &pcfg_pull_up>,
- <RK_GPIO3 24 RK_FUNC_2 &pcfg_pull_up>,
- <RK_GPIO3 25 RK_FUNC_2 &pcfg_pull_up>;
- };
- };
- };
- };
-};
-
-/* original rk3188.dtsi from Linux 3.16 */
-/ {
- compatible = "rockchip,rk3188";
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
- enable-method = "rockchip,rk3066-smp";
-
- cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- next-level-cache = <&L2>;
- reg = <0x0>;
- };
- cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- next-level-cache = <&L2>;
- reg = <0x1>;
- };
- cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- next-level-cache = <&L2>;
- reg = <0x2>;
- };
- cpu@3 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- next-level-cache = <&L2>;
- reg = <0x3>;
- };
- };
-
- soc {
- global-timer@1013c200 {
- interrupts = <GIC_PPI 11 0xf04>;
- };
-
- local-timer@1013c600 {
- interrupts = <GIC_PPI 13 0xf04>;
- };
-
- sram: sram@10080000 {
- compatible = "mmio-sram";
- reg = <0x10080000 0x8000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x10080000 0x8000>;
-
- smp-sram@0 {
- compatible = "rockchip,rk3066-smp-sram";
- reg = <0x0 0x50>;
- };
- };
-
- pinctrl@20008000 {
- compatible = "rockchip,rk3188-pinctrl";
- rockchip,grf = <&grf>;
- rockchip,pmu = <&pmu>;
-
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- gpio0: gpio0@0x2000a000 {
- compatible = "rockchip,rk3188-gpio-bank0";
- reg = <0x2000a000 0x100>;
- interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_gates8 9>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio1: gpio1@0x2003c000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x2003c000 0x100>;
- interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_gates8 10>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio2: gpio2@2003e000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x2003e000 0x100>;
- interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_gates8 11>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio3: gpio3@20080000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x20080000 0x100>;
- interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_gates8 12>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- pcfg_pull_up: pcfg_pull_up {
- bias-pull-up;
- };
-
- pcfg_pull_down: pcfg_pull_down {
- bias-pull-down;
- };
-
- pcfg_pull_none: pcfg_pull_none {
- bias-disable;
- };
-
- uart0 {
- uart0_xfer: uart0-xfer {
- rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_up>,
- <RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- uart0_cts: uart0-cts {
- rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- uart0_rts: uart0-rts {
- rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_none>;
- };
- };
-
- uart1 {
- uart1_xfer: uart1-xfer {
- rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_up>,
- <RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- uart1_cts: uart1-cts {
- rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- uart1_rts: uart1-rts {
- rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_none>;
- };
- };
-
- uart2 {
- uart2_xfer: uart2-xfer {
- rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_up>,
- <RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_none>;
- };
- /* no rts / cts for uart2 */
- };
-
- uart3 {
- uart3_xfer: uart3-xfer {
- rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_up>,
- <RK_GPIO1 11 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- uart3_cts: uart3-cts {
- rockchip,pins = <RK_GPIO1 12 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- uart3_rts: uart3-rts {
- rockchip,pins = <RK_GPIO1 13 RK_FUNC_1 &pcfg_pull_none>;
- };
- };
-
- sd0 {
- sd0_clk: sd0-clk {
- rockchip,pins = <RK_GPIO3 2 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- sd0_cmd: sd0-cmd {
- rockchip,pins = <RK_GPIO3 3 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- sd0_cd: sd0-cd {
- rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- sd0_wp: sd0-wp {
- rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- sd0_pwr: sd0-pwr {
- rockchip,pins = <RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- sd0_bus1: sd0-bus-width1 {
- rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- sd0_bus4: sd0-bus-width4 {
- rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO3 6 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO3 7 RK_FUNC_1 &pcfg_pull_none>;
- };
- };
-
- sd1 {
- sd1_clk: sd1-clk {
- rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- sd1_cmd: sd1-cmd {
- rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- sd1_cd: sd1-cd {
- rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- sd1_wp: sd1-wp {
- rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- sd1_bus1: sd1-bus-width1 {
- rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- sd1_bus4: sd1-bus-width4 {
- rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_none>;
- };
- };
- };
- };
-};
diff --git a/arch/arm/dts/rk3xxx.dtsi b/arch/arm/dts/rk3xxx.dtsi
deleted file mode 100644
index 2adf1cc..0000000
--- a/arch/arm/dts/rk3xxx.dtsi
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * Copyright (c) 2013 MundoReader S.L.
- * Author: Heiko Stuebner <heiko@sntech.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton.dtsi"
-
-/ {
- interrupt-parent = <&gic>;
-
- soc {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges;
-
- scu@1013c000 {
- compatible = "arm,cortex-a9-scu";
- reg = <0x1013c000 0x100>;
- };
-
- pmu: pmu@20004000 {
- compatible = "rockchip,rk3066-pmu", "syscon";
- reg = <0x20004000 0x100>;
- };
-
- grf: grf@20008000 {
- compatible = "syscon";
- reg = <0x20008000 0x200>;
- };
-
- gic: interrupt-controller@1013d000 {
- compatible = "arm,cortex-a9-gic";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = <0x1013d000 0x1000>,
- <0x1013c100 0x0100>;
- };
-
- L2: l2-cache-controller@10138000 {
- compatible = "arm,pl310-cache";
- reg = <0x10138000 0x1000>;
- cache-unified;
- cache-level = <2>;
- };
-
- global-timer@1013c200 {
- compatible = "arm,cortex-a9-global-timer";
- reg = <0x1013c200 0x20>;
- interrupts = <GIC_PPI 11 0x304>;
- clocks = <&dummy150m>;
- };
-
- local-timer@1013c600 {
- compatible = "arm,cortex-a9-twd-timer";
- reg = <0x1013c600 0x20>;
- interrupts = <GIC_PPI 13 0x304>;
- clocks = <&dummy150m>;
- };
-
- uart0: serial@10124000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x10124000 0x400>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <1>;
- clocks = <&clk_gates1 8>;
- status = "disabled";
- };
-
- uart1: serial@10126000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x10126000 0x400>;
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <1>;
- clocks = <&clk_gates1 10>;
- status = "disabled";
- };
-
- uart2: serial@20064000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x20064000 0x400>;
- interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <1>;
- clocks = <&clk_gates1 12>;
- status = "disabled";
- };
-
- uart3: serial@20068000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x20068000 0x400>;
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <1>;
- clocks = <&clk_gates1 14>;
- status = "disabled";
- };
-
- dwmmc@10214000 {
- compatible = "rockchip,rk2928-dw-mshc";
- reg = <0x10214000 0x1000>;
- interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- clocks = <&clk_gates5 10>, <&clk_gates2 11>;
- clock-names = "biu", "ciu";
-
- status = "disabled";
- };
-
- dwmmc@10218000 {
- compatible = "rockchip,rk2928-dw-mshc";
- reg = <0x10218000 0x1000>;
- interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- clocks = <&clk_gates5 11>, <&clk_gates2 13>;
- clock-names = "biu", "ciu";
-
- status = "disabled";
- };
- };
-};
--
2.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2015-03-04 20:12 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-04 20:11 [PATCH v2 00/18] Update support for RK3188, " Andrey Panov
2015-03-04 20:11 ` [PATCH v2 01/18] lib: Add gcd() function Andrey Panov
2015-03-04 20:11 ` [PATCH v2 02/18] CLK: Add support for composite clock from Linux kernel Andrey Panov
2015-03-04 20:11 ` [PATCH v2 03/18] CLK: Add fractional divider clock support " Andrey Panov
2015-03-04 20:11 ` [PATCH v2 04/18] CLK: clk-mux: Respect CLK_MUX_HIWORD_MASK flag Andrey Panov
2015-03-04 20:11 ` [PATCH v2 05/18] CLK: clk-divider: Respect CLK_DIVIDER_HIWORD_MASK flag Andrey Panov
2015-03-04 20:11 ` [PATCH v2 06/18] CLK: clk-divider: Introduce clk_divider_alloc() and *_free() routines Andrey Panov
2015-03-04 20:11 ` [PATCH v2 07/18] CLK: clk-divider: Respect CLK_DIVIDER_POWER_OF_TWO flag Andrey Panov
2015-03-04 20:11 ` [PATCH v2 08/18] CLK: Check and do not allow to register clock twice Andrey Panov
2015-03-04 20:11 ` [PATCH v2 09/18] CLK: Add helper defines to barebox-wrapper.h for easier porting of drivers from Linux kernel Andrey Panov
2015-03-04 20:11 ` [PATCH v2 10/18] NET: arc_emac: Update for newer DTS, support for Rockchip .compatible Andrey Panov
2015-03-04 20:11 ` [PATCH v2 11/18] MMC: dw_mmc: Add support for PIO mode and Rockchip variant of this hardware Andrey Panov
2015-03-04 20:11 ` [PATCH v2 12/18] ARM: Rockchip: Remove unused files from mach-rockchip Andrey Panov
2015-03-04 20:11 ` [PATCH v2 13/18] ARM: Rockchip: Update Kconfig Andrey Panov
2015-03-04 20:11 ` [PATCH v2 14/18] ARM: Rockchip: Update clk driver from Linux kernel for use with newer DTS Andrey Panov
2015-03-04 20:11 ` Andrey Panov [this message]
2015-03-04 20:11 ` [PATCH v2 16/18] ARM: Rockchip: Update Radxa Rock board Andrey Panov
2015-03-04 20:11 ` [PATCH v2 17/18] ARM: Rockchip: Add Radxa Rock defconfig Andrey Panov
2015-03-04 20:11 ` [PATCH v2 18/18] ARM: Rockchip: Add documentation Andrey Panov
2015-03-05 8:44 ` [PATCH v2 00/18] Update support for RK3188, Radxa Rock board Sascha Hauer
2015-03-05 18:46 ` Панов Андрей
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1425499906-32125-16-git-send-email-rockford@yandex.ru \
--to=rockford@yandex.ru \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox