[PATCH v2 15/27] net: at91_ether: convert to streaming DMA ops

[Lucas Stach <dev@lynxeye.de>]

Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
 drivers/net/at91_ether.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/at91_ether.c b/drivers/net/at91_ether.c
index 9597639..5a74837 100644
--- a/drivers/net/at91_ether.c
+++ b/drivers/net/at91_ether.c
@@ -35,7 +35,6 @@
 #include <linux/clk.h>
 #include <linux/mii.h>
 #include <errno.h>
-#include <asm/mmu.h>
 #include <linux/phy.h>
 
 #include "at91_ether.h"
@@ -200,7 +199,8 @@ static int at91_ether_send(struct eth_device *edev, void *packet, int length)
 {
 	while (!(at91_emac_read(AT91_EMAC_TSR) & AT91_EMAC_TSR_BNQ));
 
-	dma_flush_range((ulong) packet, (ulong)packet + length);
+	dma_sync_single_for_device((unsigned long)packet, length, DMA_TO_DEVICE);
+
 	/* Set address of the data in the Transmit Address register */
 	at91_emac_write(AT91_EMAC_TAR, (unsigned long) packet);
 	/* Set length of the packet in the Transmit Control register */
@@ -211,6 +211,8 @@ static int at91_ether_send(struct eth_device *edev, void *packet, int length)
 	at91_emac_write(AT91_EMAC_TSR,
 		at91_emac_read(AT91_EMAC_TSR) | AT91_EMAC_TSR_COMP);
 
+	dma_sync_single_for_cpu((unsigned long)packet, length, DMA_TO_DEVICE);
+
 	return 0;
 }
 
@@ -225,7 +227,11 @@ static int at91_ether_rx(struct eth_device *edev)
 
 	size = rbfp->size & RBF_SIZE;
 
+	dma_sync_single_for_cpu((unsigned long)rbfp->addr, size,
+				DMA_FROM_DEVICE);
 	net_receive(edev, (unsigned char *)(rbfp->addr & RBF_ADDR), size);
+	dma_sync_single_for_device((unsigned long)rbfp->addr, size,
+				   DMA_FROM_DEVICE);
 
 	rbfp->addr &= ~RBF_OWNER;
 	if (rbfp->addr & RBF_WRAP)
-- 
2.1.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox