mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jan Luebbe <jlu@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [RFC 0/4] FIT Support
Date: Thu, 12 Mar 2015 15:39:55 +0100	[thread overview]
Message-ID: <1426171199-2729-1-git-send-email-jlu@pengutronix.de> (raw)

Hi,

this is the current work-in-progress state of my FIT support patches.
The FIT loading code has basically been rewritten from scratch, as the
original U-Boot code uses libfdt and barebox's DT support works on an
in-memory tree.

These patches apply on v2015.03.0.
The two patches from Sascha are required for the basic RSA support.
The third patch adds FIT support.
The fourth patch contains some test data to use in the sandbox.

$ ./barebox -i key.dtb -i sign-configs.itb 
add file key.dtb()
add file sign-configs.itb()

barebox 2015.03.0-00005-g574d35e191f7-dirty #81 Thu Mar 12 14:57:13 CET 2015

Board: barebox sandbox
...
Hit any key to stop autoboot:  3
barebox@barebox sandbox:/ oftree -l /dev/fd0
barebox@barebox sandbox:/ bootm /dev/fd1    

Loading open firmware Device Tree flattened Binary '/dev/fd1'
FIT '/dev/fd1': 'Chrome OS kernel image with one or more FDT blobs'
FIT configuration 'conf@1' (no description)
sig OK
FIT image 'kernel@1' (no description)
hash OK
FIT image 'fdt@1': 'snow'
hash OK

Jan Luebbe (2):
  FIT: add FIT image support
  FIT: add test config and data [do not merge]

Sascha Hauer (2):
  digest: Make filename arguments const
  Add rsa support

 arch/arm/lib/bootm.c                   |  74 +++++
 arch/sandbox/configs/sandbox_defconfig |  33 +-
 commands/Kconfig                       |   8 +
 common/Kconfig                         |   7 +
 common/Makefile                        |   1 +
 common/digest.c                        |   8 +-
 common/image-fit.c                     | 585 +++++++++++++++++++++++++++++++++
 crypto/Kconfig                         |   3 +
 crypto/Makefile                        |   1 +
 crypto/rsa.c                           | 411 +++++++++++++++++++++++
 include/asm-generic/errno.h            |   5 +
 include/digest.h                       |   8 +-
 include/image-fit.h                    |  42 +++
 include/rsa.h                          |  54 +++
 key.dtb                                | Bin 0 -> 1023 bytes
 key.dts                                |  27 ++
 sign-configs.itb                       | Bin 0 -> 2453 bytes
 17 files changed, 1247 insertions(+), 20 deletions(-)
 create mode 100644 common/image-fit.c
 create mode 100644 crypto/rsa.c
 create mode 100644 include/image-fit.h
 create mode 100644 include/rsa.h
 create mode 100644 key.dtb
 create mode 100644 key.dts
 create mode 100644 sign-configs.itb

-- 
2.1.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2015-03-12 14:40 UTC|newest]

Thread overview: 59+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-12 14:39 Jan Luebbe [this message]
2015-03-12 14:39 ` [RFC 1/4] digest: Make filename arguments const Jan Luebbe
2015-03-13  7:40   ` Sascha Hauer
2015-03-12 14:39 ` [RFC 2/4] Add rsa support Jan Luebbe
2015-03-12 17:47   ` Jean-Christophe PLAGNIOL-VILLARD
2015-03-13  9:35     ` Jan Lübbe
2015-03-13  9:56       ` Jean-Christophe PLAGNIOL-VILLARD
2015-03-13 10:06         ` Sascha Hauer
2015-03-13 10:12           ` Jean-Christophe PLAGNIOL-VILLARD
2015-03-13 10:22             ` Jan Lübbe
2015-03-13 10:26               ` Jean-Christophe PLAGNIOL-VILLARD
2015-03-13 10:10         ` Jan Lübbe
2015-03-13 10:25           ` Jean-Christophe PLAGNIOL-VILLARD
2015-03-13 10:43             ` Jan Lübbe
2015-03-13 15:49               ` Jean-Christophe PLAGNIOL-VILLARD
2015-03-16 10:00                 ` Jan Lübbe
2015-03-16 10:27                   ` Jean-Christophe PLAGNIOL-VILLARD
2015-03-16 11:25                     ` Jan Lübbe
2015-03-16 11:33                       ` Jean-Christophe PLAGNIOL-VILLARD
2015-03-16 15:42                         ` Jan Lübbe
2015-03-17 10:48                           ` Jean-Christophe PLAGNIOL-VILLARD
2015-03-17 12:09                             ` Jan Lübbe
2015-03-17 12:39                               ` Jean-Christophe PLAGNIOL-VILLARD
2015-03-17 12:57                                 ` Jan Lübbe
2015-03-12 14:39 ` [RFC 3/4] FIT: add FIT image support Jan Luebbe
2015-03-12 18:19   ` Jean-Christophe PLAGNIOL-VILLARD
2015-03-13  9:28     ` Jan Lübbe
2015-03-13 10:05       ` Jean-Christophe PLAGNIOL-VILLARD
2015-03-13 10:21         ` Jan Lübbe
2015-03-13 14:28           ` Jean-Christophe PLAGNIOL-VILLARD
2015-03-13 15:41             ` Jan Lübbe
2015-03-13 16:08               ` Jean-Christophe PLAGNIOL-VILLARD
2015-03-16 10:19                 ` Jan Lübbe
2015-03-16 11:14                   ` Jean-Christophe PLAGNIOL-VILLARD
2015-03-16 12:08                     ` Jan Lübbe
2015-03-16 12:19                       ` Jean-Christophe PLAGNIOL-VILLARD
2015-03-16 13:28                         ` Jan Lübbe
2015-03-16 13:51                           ` Jean-Christophe PLAGNIOL-VILLARD
2015-03-16 14:31                             ` Jan Lübbe
2015-03-16 14:40                               ` Jean-Christophe PLAGNIOL-VILLARD
2015-03-16 14:50                                 ` Jan Lübbe
2015-03-13 11:33         ` Marc Kleine-Budde
2015-03-13 15:54           ` Jean-Christophe PLAGNIOL-VILLARD
2015-03-13 16:06             ` Marc Kleine-Budde
2015-03-13 17:00               ` Jean-Christophe PLAGNIOL-VILLARD
2015-03-16 10:04                 ` Jan Lübbe
2015-03-16 10:28                   ` Jean-Christophe PLAGNIOL-VILLARD
2015-12-29 10:18   ` Yegor Yefremov
2015-03-12 14:39 ` [RFC 4/4] FIT: add test config and data [do not merge] Jan Luebbe
2015-03-12 14:51 ` [RFC] digest: Add enum Jan Luebbe
2015-03-12 17:50   ` Jean-Christophe PLAGNIOL-VILLARD
2015-03-13  9:54     ` Jan Lübbe
2015-03-13 10:10       ` Jean-Christophe PLAGNIOL-VILLARD
2015-03-13 18:50         ` Robert Schwebel
2015-11-11 11:39 ` [RFC 0/4] FIT Support Yegor Yefremov
2015-11-13 11:35   ` Antony Pavlov
2015-11-13 12:54   ` Sascha Hauer
2015-12-29  8:10     ` Yegor Yefremov
2016-01-05  8:11     ` Marc Kleine-Budde

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1426171199-2729-1-git-send-email-jlu@pengutronix.de \
    --to=jlu@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox