[PATCH] ARM: i.MX6: Add clock for ocotp

[PATCH] ARM: i.MX6: Add clock for ocotp

[Sascha Hauer]

This clock is not specified in the devicetree node, thus is missing
since we switched to of based clocks for i.MX6. Add this clock back
as physbase clk to make the ocotp driver work again.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-imx/clk-imx6.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-imx/clk-imx6.c b/arch/arm/mach-imx/clk-imx6.c
index dccf0a8..145b394 100644
--- a/arch/arm/mach-imx/clk-imx6.c
+++ b/arch/arm/mach-imx/clk-imx6.c
@@ -410,6 +410,8 @@ static int imx6_ccm_probe(struct device_d *dev)
 	clks[IMX6QDL_CLK_CKO1]         = imx_clk_gate("cko1",           "cko1_podf",         base + 0x60, 7);
 	clks[IMX6QDL_CLK_CKO2]         = imx_clk_gate("cko2",           "cko2_podf",         base + 0x60, 24);
 
+	clkdev_add_physbase(clks[IMX6QDL_CLK_IPG], MX6_OCOTP_BASE_ADDR, NULL);
+
 	if (IS_ENABLED(CONFIG_DRIVER_VIDEO_IMX_IPUV3))
 		imx6_add_video_clks(anatop_base, ccm_base);
 
-- 
2.1.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox