mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: "Teresa Gámez" <t.gamez@phytec.de>
To: barebox@lists.infradead.org
Subject: [PATCH 2/2] mtd: nand_omap_gpmc: Fix ecc check for bch8 romcode
Date: Mon, 30 Mar 2015 15:51:05 +0200	[thread overview]
Message-ID: <1427723465-9306-2-git-send-email-t.gamez@phytec.de> (raw)
In-Reply-To: <1427723465-9306-1-git-send-email-t.gamez@phytec.de>

The bch8 romcode was only checked and corrected for the
first 512 bytes of a 2048 byte page. Set interation counter
and eccsizes correct for the different bch types.

Tested OMAP_ECC_BCH8_CODE_HW and OMAP_ECC_BCH8_CODE_HW_ROMCODE.

Reported-by: Gabor Janak <g.janak@agilion.de>
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
---
 drivers/mtd/nand/nand_omap_gpmc.c | 38 +++++++++++++++++++++++---------------
 1 file changed, 23 insertions(+), 15 deletions(-)

diff --git a/drivers/mtd/nand/nand_omap_gpmc.c b/drivers/mtd/nand/nand_omap_gpmc.c
index 647605b..9d9d27e 100644
--- a/drivers/mtd/nand/nand_omap_gpmc.c
+++ b/drivers/mtd/nand/nand_omap_gpmc.c
@@ -298,37 +298,45 @@ static int omap_correct_bch(struct mtd_info *mtd, uint8_t *dat,
 {
 	struct nand_chip *nand = (struct nand_chip *)(mtd->priv);
 	struct gpmc_nand_info *oinfo = (struct gpmc_nand_info *)(nand->priv);
-	int i, j, eccsize, eccflag, count, totalcount;
+	int i, j, eccflag, count, totalcount, actual_eccsize;
 	unsigned int err_loc[8];
-	int blocks = 0;
 	int select_4_8;
 
-	if (oinfo->ecc_mode == OMAP_ECC_BCH4_CODE_HW) {
-		eccsize = 7;
+	int eccsteps = oinfo->nand.ecc.steps;
+	int eccsize = oinfo->nand.ecc.bytes;
+
+	switch (oinfo->ecc_mode) {
+	case OMAP_ECC_BCH4_CODE_HW:
+		actual_eccsize = eccsize;
 		select_4_8 = 0;
-	} else {
-		eccsize = 13;
+		break;
+	case OMAP_ECC_BCH8_CODE_HW:
+		eccsize /= eccsteps;
+		actual_eccsize = eccsize;
+		select_4_8 = 1;
+		break;
+	case OMAP_ECC_BCH8_CODE_HW_ROMCODE:
+		actual_eccsize = eccsize - 1;
 		select_4_8 = 1;
+		break;
+	default:
+		dev_err(oinfo->pdev, "invalid driver configuration\n");
+		return -EINVAL;
 	}
 
-	if (nand->ecc.size  == 2048)
-		blocks = 4;
-	else
-		blocks = 1;
-
 	totalcount = 0;
 
-	for (i = 0; i < blocks; i++) {
+	for (i = 0; i < eccsteps; i++) {
 		/* check if any ecc error */
 		eccflag = 0;
-		for (j = 0; (j < eccsize) && (eccflag == 0); j++) {
+		for (j = 0; (j < actual_eccsize) && (eccflag == 0); j++) {
 			if (calc_ecc[j] != 0)
 				eccflag = 1;
 		}
 
 		if (eccflag == 1) {
 			eccflag = 0;
-			for (j = 0; (j < eccsize) &&
+			for (j = 0; (j < actual_eccsize) &&
 					(eccflag == 0); j++)
 				if (read_ecc[j] != 0xFF)
 					eccflag = 1;
@@ -350,7 +358,7 @@ static int omap_correct_bch(struct mtd_info *mtd, uint8_t *dat,
 			/* else, not interested to correct ecc */
 		}
 
-		calc_ecc = calc_ecc + eccsize;
+		calc_ecc = calc_ecc + actual_eccsize;
 		read_ecc = read_ecc + eccsize;
 		dat += 512;
 	}
-- 
1.9.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2015-03-30 13:54 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-30 13:51 [PATCH 1/2] mtd: nand_omap_gpmc: Remove unused code Teresa Gámez
2015-03-30 13:51 ` Teresa Gámez [this message]
2015-03-30 17:27 ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1427723465-9306-2-git-send-email-t.gamez@phytec.de \
    --to=t.gamez@phytec.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox