From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH v3 02/18] i.MX: serial: Add constants for UART clock divisor
Date: Wed, 6 May 2015 12:31:57 -0700 [thread overview]
Message-ID: <1430940733-4415-3-git-send-email-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <1430940733-4415-1-git-send-email-andrew.smirnov@gmail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
include/serial/imx-uart.h | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/include/serial/imx-uart.h b/include/serial/imx-uart.h
index e40843d..0a01788 100644
--- a/include/serial/imx-uart.h
+++ b/include/serial/imx-uart.h
@@ -77,6 +77,13 @@
#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */
#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */
#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */
+#define UFCR_RFDIV6 (0b000<<7) /* Reference freq divider mask */
+#define UFCR_RFDIV5 (0b001<<7) /* Reference freq divider mask */
+#define UFCR_RFDIV4 (0b010<<7) /* Reference freq divider mask */
+#define UFCR_RFDIV3 (0b011<<7) /* Reference freq divider mask */
+#define UFCR_RFDIV2 (0b100<<7) /* Reference freq divider mask */
+#define UFCR_RFDIV1 (0b101<<7) /* Reference freq divider mask */
+#define UFCR_RFDIV7 (0b110<<7) /* Reference freq divider mask */
#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */
#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */
#define USR1_RTSS (1<<14) /* RTS pin status */
--
2.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2015-05-06 19:32 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-06 19:31 [PATCH v3 00/18] i.MX serial cleanup, bootstrap code fixes, boot via IRAM Andrey Smirnov
2015-05-06 19:31 ` [PATCH v3 01/18] i.MX: Move UART definitions into a separate file Andrey Smirnov
2015-05-06 19:31 ` Andrey Smirnov [this message]
2015-05-06 19:31 ` [PATCH v3 03/18] i.MX: serial: Add baud rate calculation convenience functions Andrey Smirnov
2015-05-06 19:31 ` [PATCH v3 04/18] i.MX: serial: Add UART init functions for DEBUG_LL Andrey Smirnov
2015-05-07 7:52 ` Sascha Hauer
2015-05-06 19:32 ` [PATCH v3 05/18] i.MX: serial: Convert PUTC_LL to use IOMEM Andrey Smirnov
2015-05-06 19:32 ` [PATCH v3 06/18] i.MX: serial: Convert i.MX51 and i.MX6 to use 'imx*_uart_setup_ll' Andrey Smirnov
2015-05-06 19:32 ` [PATCH v3 07/18] i.MX51: babbage: Implement CONFIG_DEBUG_LL Andrey Smirnov
2015-05-07 7:57 ` Sascha Hauer
2015-05-06 19:32 ` [PATCH v3 08/18] i.MX: serial: Distil common clock ungating code Andrey Smirnov
2015-05-07 7:56 ` Sascha Hauer
2015-05-06 19:32 ` [PATCH v3 09/18] Makefile.lib: Make 'check_file_size' more flexible Andrey Smirnov
2015-05-06 19:32 ` [PATCH v3 10/18] i.MX: Add provisions to boot from IRAM Andrey Smirnov
2015-05-06 19:32 ` [PATCH v3 11/18] imx-image: Correctly fill image size in prepended header Andrey Smirnov
2015-05-06 19:32 ` [PATCH v3 12/18] bootstrap: Fix potential memory leak in 'read_image_head' Andrey Smirnov
2015-05-06 19:32 ` [PATCH v3 13/18] bootstrap_read_devfs(): Check for errors from devfs_add_partition() Andrey Smirnov
2015-05-06 19:32 ` [PATCH v3 14/18] bootstrap_read_devfs(): Close file after we are done with it Andrey Smirnov
2015-05-06 19:32 ` [PATCH v3 15/18] bootstrap_read_devfs(): Fix potential memory leak Andrey Smirnov
2015-05-06 19:32 ` [PATCH v3 16/18] bootstrap_read_devfs(): Check for errors from dev_add_bb_dev() Andrey Smirnov
2015-05-06 19:32 ` [PATCH v3 17/18] bootstrap_read_devfs(): Remove all partitions upon function completion Andrey Smirnov
2015-05-06 19:32 ` [PATCH v3 18/18] bootstrap: Warn if image size in BB header is zero Andrey Smirnov
2015-05-07 7:51 ` [PATCH v3 00/18] i.MX serial cleanup, bootstrap code fixes, boot via IRAM Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1430940733-4415-3-git-send-email-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox