From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH 04/10] common/memtest.c: Distil common error reporting code
Date: Wed, 13 May 2015 19:54:21 -0700 [thread overview]
Message-ID: <1431572067-4038-4-git-send-email-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <1431572067-4038-1-git-send-email-andrew.smirnov@gmail.com>
Move all of the common code for error message output into a new
function mem_test_report_failure() and convert the rest of the code to
use it.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
common/memtest.c | 53 ++++++++++++++++++++++++++++-------------------------
1 file changed, 28 insertions(+), 25 deletions(-)
diff --git a/common/memtest.c b/common/memtest.c
index 57e2ad9..d8d1154 100644
--- a/common/memtest.c
+++ b/common/memtest.c
@@ -28,6 +28,17 @@
#include <errno.h>
#include <memtest.h>
+static void mem_test_report_failure(const char *failure_description,
+ resource_size_t expected_value,
+ resource_size_t actual_value,
+ volatile resource_size_t *address)
+{
+ printf("FAILURE (%s): "
+ "expected 0x%08x, actual 0x%08x at address 0x%08x.\n",
+ failure_description, expected_value, actual_value,
+ (resource_size_t)address);
+}
+
int mem_test_bus_integrity(resource_size_t _start,
resource_size_t _end)
{
@@ -87,9 +98,8 @@ int mem_test_bus_integrity(resource_size_t _start,
*dummy = ~val;
readback = *start;
if (readback != val) {
- printf("FAILURE (data line): "
- "expected 0x%08x, actual 0x%08x at address 0x%08x.\n",
- val, readback, (resource_size_t)start);
+ mem_test_report_failure("data line",
+ val, readback, start);
return -EIO;
}
@@ -97,10 +107,8 @@ int mem_test_bus_integrity(resource_size_t _start,
*dummy = val;
readback = *start;
if (readback != ~val) {
- printf("FAILURE (data line): "
- "Is 0x%08x, should be 0x%08x at address 0x%08x.\n",
- readback,
- ~val, (resource_size_t)start);
+ mem_test_report_failure("data line",
+ ~val, readback, start);
return -EIO;
}
}
@@ -174,11 +182,8 @@ int mem_test_bus_integrity(resource_size_t _start,
for (offset = 1; offset <= num_words; offset <<= 1) {
temp = start[offset];
if (temp != pattern) {
- printf("FAILURE: Address bit "
- "stuck high @ 0x%08x:"
- " expected 0x%08x, actual 0x%08x.\n",
- (resource_size_t)&start[offset],
- pattern, temp);
+ mem_test_report_failure("address bit stuck high",
+ pattern, temp, &start[offset]);
return -EIO;
}
}
@@ -203,11 +208,9 @@ int mem_test_bus_integrity(resource_size_t _start,
if ((temp != pattern) &&
(offset != offset2)) {
- printf("FAILURE: Address bit stuck"
- " low or shorted @"
- " 0x%08x: expected 0x%08x, actual 0x%08x.\n",
- (resource_size_t)&start[offset],
- pattern, temp);
+ mem_test_report_failure(
+ "address bit stuck low or shorted",
+ pattern, temp, &start[offset]);
return -EIO;
}
}
@@ -278,10 +281,10 @@ int mem_test_dram(resource_size_t _start,
temp = start[offset];
if (temp != (offset + 1)) {
- printf("\nFAILURE (read/write) @ 0x%08x:"
- " expected 0x%08x, actual 0x%08x.\n",
- (resource_size_t)&start[offset],
- (offset + 1), temp);
+ printf("\n");
+ mem_test_report_failure("read/write",
+ (offset + 1),
+ temp, &start[offset]);
return -EIO;
}
@@ -306,10 +309,10 @@ int mem_test_dram(resource_size_t _start,
temp = start[offset];
if (temp != anti_pattern) {
- printf("\nFAILURE (read/write): @ 0x%08x:"
- " expected 0x%08x, actual 0x%08x.\n",
- (resource_size_t)&start[offset],
- anti_pattern, temp);
+ printf("\n");
+ mem_test_report_failure("read/write",
+ anti_pattern,
+ temp, &start[offset]);
return -EIO;
}
--
2.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2015-05-14 2:55 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-14 2:54 [PATCH 01/10] common/memtest.c: Fix incorrect array boundary check Andrey Smirnov
2015-05-14 2:54 ` [PATCH 02/10] common/memtest.c: Do not omit offset of 0 from tests Andrey Smirnov
2015-05-14 2:54 ` [PATCH 03/10] common/memtest.c: Refactor mem_test() into three surbroutines Andrey Smirnov
2015-05-14 2:54 ` Andrey Smirnov [this message]
2015-05-14 2:54 ` [PATCH 05/10] serial: i.MX: Write settings to a correct register Andrey Smirnov
2015-05-14 2:54 ` [PATCH 06/10] common: pbl: Allow boards to override hang() Andrey Smirnov
2015-05-15 5:25 ` Sascha Hauer
2015-05-23 18:13 ` Andrey Smirnov
2015-05-14 2:54 ` [PATCH 07/10] debug_ll: i.MX: Add support for input to DEBUG_LL Andrey Smirnov
2015-05-14 2:54 ` [PATCH 08/10] i.MX51: babbage: Add UART RXD pin configuration Andrey Smirnov
2015-05-14 2:54 ` [PATCH 09/10] pbl: Implement ctrlc() using getc_ll() Andrey Smirnov
2015-05-14 2:54 ` [PATCH 10/10] ARM: pbl: Add an option to validate DRAM Andrey Smirnov
2015-05-19 7:06 ` Sascha Hauer
2015-05-23 18:48 ` Andrey Smirnov
2015-05-23 20:44 ` Alexander Aring
2015-05-24 18:39 ` Andrey Smirnov
2015-05-26 6:57 ` Sascha Hauer
2015-06-01 13:09 ` Andrey Smirnov
2015-06-03 8:10 ` Sascha Hauer
2015-05-15 5:33 ` [PATCH 01/10] common/memtest.c: Fix incorrect array boundary check Sascha Hauer
2015-05-23 18:20 ` Andrey Smirnov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431572067-4038-4-git-send-email-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox