From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 07/10] imx-bbu-nand-fcb: make available for i.MX28 aswell
Date: Fri, 12 Jun 2015 08:35:43 +0200 [thread overview]
Message-ID: <1434090946-6574-8-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1434090946-6574-1-git-send-email-s.hauer@pengutronix.de>
The code can be used with slight modifications on i.MX28 aswell.
Add a i.MX28 registration function and move the differences to
function callbacks.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
common/Kconfig | 2 +-
common/imx-bbu-nand-fcb.c | 173 ++++++++++++++++++++++++++++++++++++++++------
include/bbu.h | 5 ++
3 files changed, 157 insertions(+), 23 deletions(-)
diff --git a/common/Kconfig b/common/Kconfig
index 0ebfe1e..31944c5 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -96,7 +96,7 @@ config FILE_LIST
config BAREBOX_UPDATE_IMX_NAND_FCB
bool
- depends on ARCH_IMX6
+ depends on ARCH_IMX6 || ARCH_IMX28
depends on BAREBOX_UPDATE
depends on MTD_WRITE
depends on NAND_MXS
diff --git a/common/imx-bbu-nand-fcb.c b/common/imx-bbu-nand-fcb.c
index ca7df97..920b5a1 100644
--- a/common/imx-bbu-nand-fcb.c
+++ b/common/imx-bbu-nand-fcb.c
@@ -17,7 +17,7 @@
*
*/
-#define pr_fmt(fmt) "imx6-bbu-nand: " fmt
+#define pr_fmt(fmt) "imx-bbu-nand-fcb: " fmt
#include <filetype.h>
#include <common.h>
@@ -28,17 +28,17 @@
#include <linux/sizes.h>
#include <bbu.h>
#include <fs.h>
-#include <mach/bbu.h>
#include <linux/mtd/mtd-abi.h>
#include <linux/mtd/nand_mxs.h>
#include <linux/mtd/mtd.h>
#include <linux/stat.h>
+#include <io.h>
struct dbbt_block {
uint32_t Checksum;
uint32_t FingerPrint;
uint32_t Version;
- uint32_t reserved;
+ uint32_t numberBB; /* reserved on i.MX6 */
uint32_t DBBTNumOfPages;
};
@@ -102,6 +102,16 @@ struct fcb_block {
uint32_t BBMarkerPhysicalOffsetInSpareData; /* The swap position of main area in spare area */
};
+struct imx_nand_fcb_bbu_handler {
+ struct bbu_handler handler;
+
+ void (*fcb_create)(struct imx_nand_fcb_bbu_handler *imx_handler,
+ struct fcb_block *fcb, struct mtd_info *mtd);
+ void (*dbbt_create)(struct imx_nand_fcb_bbu_handler *imx_handler,
+ struct dbbt_block *dbbt, int num_bad_blocks);
+ enum filetype filetype;
+};
+
#define BF_VAL(v, bf) (((v) & bf##_MASK) >> bf##_OFFSET)
#define GETBIT(v,n) (((v) >> (n)) & 0x1)
@@ -228,7 +238,8 @@ static ssize_t raw_write_page(struct mtd_info *mtd, void *buf, loff_t offset)
return ret;
}
-static int fcb_create(struct fcb_block *fcb, struct mtd_info *mtd)
+static int fcb_create(struct imx_nand_fcb_bbu_handler *imx_handler,
+ struct fcb_block *fcb, struct mtd_info *mtd)
{
fcb->FingerPrint = 0x20424346;
fcb->Version = 0x01000000;
@@ -241,12 +252,6 @@ static int fcb_create(struct fcb_block *fcb, struct mtd_info *mtd)
mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize) >> 1;
fcb->EccBlockNEccType = fcb->EccBlock0EccType;
- /* Also hardcoded in kobs-ng */
- fcb->DataSetup = 80;
- fcb->DataHold = 60;
- fcb->AddressSetup = 25;
- fcb->DSAMPLE_TIME = 6;
- fcb->MetadataBytes = 0x0000000a;
fcb->EccBlock0Size = 0x00000200;
fcb->EccBlockNSize = 0x00000200;
@@ -260,12 +265,14 @@ static int fcb_create(struct fcb_block *fcb, struct mtd_info *mtd)
fcb->BBMarkerPhysicalOffset = mtd->writesize;
+ imx_handler->fcb_create(imx_handler, fcb, mtd);
+
fcb->Checksum = calc_chksum((void *)fcb + 4, sizeof(*fcb) - 4);
return 0;
}
-static int imx6_bbu_erase(struct mtd_info *mtd)
+static int imx_bbu_erase(struct mtd_info *mtd)
{
uint64_t offset = 0;
int len = SZ_2M;
@@ -295,7 +302,7 @@ static int imx6_bbu_erase(struct mtd_info *mtd)
return 0;
}
-static int imx6_bbu_write_firmware(struct mtd_info *mtd, int block, void *buf, size_t len)
+static int imx_bbu_write_firmware(struct mtd_info *mtd, int block, void *buf, size_t len)
{
uint64_t offset = block * mtd->erasesize;
int ret;
@@ -348,8 +355,10 @@ static int dbbt_data_create(struct mtd_info *mtd, void *buf, int block_last)
return n_bad_blocks;
}
-static int imx6_bbu_nand_update(struct bbu_handler *handler, struct bbu_data *data)
+static int imx_bbu_nand_update(struct bbu_handler *handler, struct bbu_data *data)
{
+ struct imx_nand_fcb_bbu_handler *imx_handler =
+ container_of(handler, struct imx_nand_fcb_bbu_handler, handler);
struct cdev *bcb_cdev;
struct mtd_info *mtd;
int ret, block_fw1, block_fw2, block_last;
@@ -361,9 +370,14 @@ static int imx6_bbu_nand_update(struct bbu_handler *handler, struct bbu_data *da
void *fw;
unsigned fw_size;
int i;
+ enum filetype filetype;
- if (file_detect_type(data->image, data->len) != filetype_arm_barebox &&
- !bbu_force(data, "Not an ARM barebox image"))
+ filetype = file_detect_type(data->image, data->len);
+
+ if (filetype != imx_handler->filetype &&
+ !bbu_force(data, "Image is not of type %s but of type %s",
+ file_type_to_string(imx_handler->filetype),
+ file_type_to_string(filetype)))
return -EINVAL;
ret = bbu_confirm(data);
@@ -398,17 +412,17 @@ static int imx6_bbu_nand_update(struct bbu_handler *handler, struct bbu_data *da
block_fw1 = 4;
- ret = imx6_bbu_erase(mtd);
+ ret = imx_bbu_erase(mtd);
if (ret)
goto out;
- ret = imx6_bbu_write_firmware(mtd, block_fw1, fw, fw_size);
+ ret = imx_bbu_write_firmware(mtd, block_fw1, fw, fw_size);
if (ret < 0)
goto out;
block_fw2 = ret;
- ret = imx6_bbu_write_firmware(mtd, block_fw2, fw, fw_size);
+ ret = imx_bbu_write_firmware(mtd, block_fw2, fw, fw_size);
if (ret < 0)
goto out;
@@ -419,7 +433,7 @@ static int imx6_bbu_nand_update(struct bbu_handler *handler, struct bbu_data *da
fcb->PagesInFirmware1 = ALIGN(data->len, mtd->writesize) / mtd->writesize;
fcb->PagesInFirmware2 = fcb->PagesInFirmware1;
- fcb_create(fcb, mtd);
+ fcb_create(imx_handler, fcb, mtd);
encode_hamming_13_8(fcb, ecc, 512);
/*
@@ -447,8 +461,11 @@ static int imx6_bbu_nand_update(struct bbu_handler *handler, struct bbu_data *da
if (ret < 0)
goto out;
- if (ret > 0)
+ if (ret > 0) {
dbbt->DBBTNumOfPages = 1;
+ if (imx_handler->dbbt_create)
+ imx_handler->dbbt_create(imx_handler, dbbt, ret);
+ }
for (i = 2; i < 4; i++) {
ret = mtd_write(mtd, mtd->erasesize * i, 2048, &written, dbbt_page);
@@ -472,16 +489,127 @@ out:
return ret;
}
+static void imx6_fcb_create(struct imx_nand_fcb_bbu_handler *imx_handler,
+ struct fcb_block *fcb, struct mtd_info *mtd)
+{
+ /* Also hardcoded in kobs-ng */
+ fcb->DataSetup = 80;
+ fcb->DataHold = 60;
+ fcb->AddressSetup = 25;
+ fcb->DSAMPLE_TIME = 6;
+ fcb->MetadataBytes = 10;
+}
+
int imx6_bbu_nand_register_handler(const char *name, unsigned long flags)
{
+ struct imx_nand_fcb_bbu_handler *imx_handler;
+ struct bbu_handler *handler;
+ int ret;
+
+ imx_handler = xzalloc(sizeof(*imx_handler));
+ imx_handler->fcb_create = imx6_fcb_create;
+ imx_handler->filetype = filetype_arm_barebox;
+
+ handler = &imx_handler->handler;
+ handler->devicefile = "nand0.barebox";
+ handler->name = name;
+ handler->flags = flags;
+ handler->handler = imx_bbu_nand_update;
+
+ ret = bbu_register_handler(handler);
+ if (ret)
+ free(handler);
+
+ return ret;
+}
+
+#ifdef CONFIG_ARCH_IMX28
+#include <mach/imx28-regs.h>
+
+#define GPMI_TIMING0 0x00000070
+#define GPMI_TIMING0_ADDRESS_SETUP_MASK (0xff << 16)
+#define GPMI_TIMING0_ADDRESS_SETUP_OFFSET 16
+#define GPMI_TIMING0_DATA_HOLD_MASK (0xff << 8)
+#define GPMI_TIMING0_DATA_HOLD_OFFSET 8
+#define GPMI_TIMING0_DATA_SETUP_MASK 0xff
+#define GPMI_TIMING0_DATA_SETUP_OFFSET 0
+
+#define GPMI_TIMING1 0x00000080
+
+#define BCH_MODE 0x00000020
+
+#define BCH_FLASH0LAYOUT0 0x00000080
+#define BCH_FLASHLAYOUT0_NBLOCKS_MASK (0xff << 24)
+#define BCH_FLASHLAYOUT0_NBLOCKS_OFFSET 24
+#define BCH_FLASHLAYOUT0_META_SIZE_MASK (0xff << 16)
+#define BCH_FLASHLAYOUT0_META_SIZE_OFFSET 16
+#define BCH_FLASHLAYOUT0_ECC0_MASK (0xf << 12)
+#define BCH_FLASHLAYOUT0_ECC0_OFFSET 12
+#define BCH_FLASHLAYOUT0_DATA0_SIZE_MASK 0xfff
+#define BCH_FLASHLAYOUT0_DATA0_SIZE_OFFSET 0
+
+#define BCH_FLASH0LAYOUT1 0x00000090
+#define BCH_FLASHLAYOUT1_PAGE_SIZE_MASK (0xffff << 16)
+#define BCH_FLASHLAYOUT1_PAGE_SIZE_OFFSET 16
+#define BCH_FLASHLAYOUT1_ECCN_MASK (0xf << 12)
+#define BCH_FLASHLAYOUT1_ECCN_OFFSET 12
+#define BCH_FLASHLAYOUT1_DATAN_SIZE_MASK 0xfff
+#define BCH_FLASHLAYOUT1_DATAN_SIZE_OFFSET 0
+
+static void imx28_fcb_create(struct imx_nand_fcb_bbu_handler *imx_handler,
+ struct fcb_block *fcb, struct mtd_info *mtd)
+{
+ u32 fl0, fl1, t0;
+ void __iomem *bch_regs = (void *)MXS_BCH_BASE;
+ void __iomem *gpmi_regs = (void *)MXS_GPMI_BASE;
+
+ fl0 = readl(bch_regs + BCH_FLASH0LAYOUT0);
+ fl1 = readl(bch_regs + BCH_FLASH0LAYOUT1);
+ t0 = readl(gpmi_regs + GPMI_TIMING0);
+
+ fcb->MetadataBytes = BF_VAL(fl0, BCH_FLASHLAYOUT0_META_SIZE);
+ fcb->DataSetup = BF_VAL(t0, GPMI_TIMING0_DATA_SETUP);
+ fcb->DataHold = BF_VAL(t0, GPMI_TIMING0_DATA_HOLD);
+ fcb->AddressSetup = BF_VAL(t0, GPMI_TIMING0_ADDRESS_SETUP);
+ fcb->MetadataBytes = BF_VAL(fl0, BCH_FLASHLAYOUT0_META_SIZE);
+ fcb->NumEccBlocksPerPage = BF_VAL(fl0, BCH_FLASHLAYOUT0_NBLOCKS);
+ fcb->EraseThreshold = readl(bch_regs + BCH_MODE);
+}
+
+static void imx28_dbbt_create(struct imx_nand_fcb_bbu_handler *imx_handler,
+ struct dbbt_block *dbbt, int num_bad_blocks)
+{
+ uint32_t a = 0;
+ uint8_t *p = (void *)dbbt;
+ int i;
+
+ dbbt->numberBB = num_bad_blocks;
+
+ for (i = 4; i < 512; i++)
+ a += p[i];
+
+ a ^= 0xffffffff;
+
+ dbbt->Checksum = a;
+}
+
+int imx28_bbu_nand_register_handler(const char *name, unsigned long flags)
+{
+ struct imx_nand_fcb_bbu_handler *imx_handler;
struct bbu_handler *handler;
int ret;
- handler = xzalloc(sizeof(*handler));
+ imx_handler = xzalloc(sizeof(*imx_handler));
+ imx_handler->fcb_create = imx28_fcb_create;
+ imx_handler->dbbt_create = imx28_dbbt_create;
+
+ imx_handler->filetype = filetype_mxs_bootstream;
+
+ handler = &imx_handler->handler;
handler->devicefile = "nand0.barebox";
handler->name = name;
handler->flags = flags;
- handler->handler = imx6_bbu_nand_update;
+ handler->handler = imx_bbu_nand_update;
ret = bbu_register_handler(handler);
if (ret)
@@ -489,3 +617,4 @@ int imx6_bbu_nand_register_handler(const char *name, unsigned long flags)
return ret;
}
+#endif
diff --git a/include/bbu.h b/include/bbu.h
index c5f22be..4cf97e1 100644
--- a/include/bbu.h
+++ b/include/bbu.h
@@ -52,11 +52,16 @@ static inline int bbu_register_handler(struct bbu_handler *unused)
#if defined(CONFIG_BAREBOX_UPDATE_IMX_NAND_FCB)
int imx6_bbu_nand_register_handler(const char *name, unsigned long flags);
+int imx28_bbu_nand_register_handler(const char *name, unsigned long flags);
#else
static inline int imx6_bbu_nand_register_handler(const char *name, unsigned long flags)
{
return -ENOSYS;
}
+static inline int imx28_bbu_nand_register_handler(const char *name, unsigned long flags)
+{
+ return -ENOSYS;
+}
#endif
#endif /* __INCLUDE_BBU_H */
--
2.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2015-06-12 6:36 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-12 6:35 i.MX FCB NAND boot updates Sascha Hauer
2015-06-12 6:35 ` [PATCH 01/10] ARM: dts: Karo tx6: increase barebox partition to 4MB Sascha Hauer
2015-06-12 6:35 ` [PATCH 02/10] mtd: partition: implement write_oob Sascha Hauer
2015-06-12 6:35 ` [PATCH 03/10] filetype: Add filetype for MXS bootstream Sascha Hauer
2015-06-12 6:35 ` [PATCH 04/10] ARM: i.MX6: bbu nand: Move to common place Sascha Hauer
2015-06-12 6:35 ` [PATCH 05/10] imx-bbu-nand-fcb: Fix debug messages Sascha Hauer
2015-06-12 6:35 ` [PATCH 06/10] imx-bbu-nand-fcb: Use barebox partition instead of whole device Sascha Hauer
2015-06-12 6:35 ` Sascha Hauer [this message]
2015-06-12 6:35 ` [PATCH 08/10] imx-bbu-nand-fcb: Let DBBT start at page 1 Sascha Hauer
2015-06-12 6:35 ` [PATCH 09/10] imx-bbu-nand-fcb: Erase whole partition Sascha Hauer
2015-06-12 6:35 ` [PATCH 10/10] imx-bbu-nand-fcb: Split space for firmware in two equal regions Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1434090946-6574-8-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox